Mini Blind Section Mariak Mini-Blinds Mariak Elite Contoured Headrail Mini-Blinds Levolor Riviera Mini-Blinds Dynasty Mini-Blinds Effective April 1, 2012 **Contract Projects 25 Windows or Less** Save a life: Install Cord Cleats!
Mini-Blind Measuring & Ordering Instructions Selecting the Type of Mounting: Determine whether the blind is going to be installed inside the window frame or outside the window frame. Inside Mount (IB): Inside mount installations are often preferred because the blinds take up less space in the room. Measuring the Width and the Length for Inside Mount: For the width, measure across the top, middle, and bottom of the window opening. Using the narrowest dimension, measure to the nearest 1/8. By using the narrowest measurement the blind will operate correctly. For the length, measure the up and down dimension on the left, center, and right side. Note the longest length measurement, measuring to the nearest 1/8. The factory will make any appropriate deductions (1/2 standard for inside mount mini blinds). Do not make any width deductions. Outside Mount (OB): Outside mount installations are mounted on the wall or on the window molding. It is best to overlap the window opening at least ¾ on each side when measuring for mini-blinds. Measuring the Width and the Length for Outside Mount: Measure the area that the blind is to cover. For mini-blinds it is recommended to overlap the window opening by at least ¾ on each side for a total of 1 ½. To allow for enough space for the mounting brackets and to cover the bottom of the window, the suggested overlap for a mini-blind is at least 3 (1 ½ above the window opening and 1 ½ below the opening). If the window opening has a sill, measure from where the top of the mini-blind will be located to the top of the window sill. Note: When outside mount blinds are specified, no factory deductions are taken. Confirming Measurements: The most common error in ordering blinds is reversing the width and the length measurements. Always confirm that the width is the measurement that goes across from left to right and that the length is the measurement that goes from top to bottom. Control Location Options: Stacking Height Standard: Tilter Left / Lift Cords Right Blind Drop Total Stack Thickness Reverse: Tilter Right / Lift Cords Left 24 2 ½ Same Left: Tilter Left / Lift Cords Left 36 3 Same Right: Tilter Right / Lift Cords Right 48 3 ½ 60 4 Wand Selection Chart: 72 4 ½ Blind Drop Wand Length 84 5 36 or less 24 Minimum Width: 13 Standard Controls 96 5 ½ 36 ⅛ 48 30 Minimum Width: 9 Center Tilt 108 6 Minimum Width: Levolor Riviera 15 Standard Controls 48 ⅛ 60 36 120 6 ½ Minimum Width: Levolor Riviera 9 Center Tilt 60 ⅛ 72 48 Maximum Width: 142 72 ⅛ 84 60 Minimum Height: 9 84 ⅛ 96 72 Maximum Height: 144 96 ⅛ or greater 96 Cutouts: A $7.00 net surcharge will apply to each side cutout. A $40.00 net surcharge will apply to each center cutout. A drawing with the necessary cutout dimensions is required. The maximum cut in width is 5 ½. Up Up In In (1)
1 x 1 Contractor & Residential Aluminum Mini-Blind System A) Headrail Steel B) Pinion Rod (Tilt Rod) Square C) End Stiffeners D) Cord Lock E) Wand Tilter F) Tape Drum (Ladder Drum) G) Tape Drum Support (Cradle) H) Box Installation Bracket I) Wand Clear Haxagonal J) Cord Ladder K) Lift Cord 1.4mm L) Cord Tassels M) Bottomrail Plus N) Bottomrail C Shape O) Bottomrail End Caps P) Slats Q) Cord Safety Rings R) Hold Dorm Brackets - Optional Mariak Contractor Mini Blind 6-Gauge Aluminum Slats Mariak Residential Mini Blind 8-Gauge Aluminum Slats System Features: Heavy Duty Metal and Plastic Components Want Tilter has a metal stem, making it the strongest tilter in the industry (2)
1-1/2 x 1 Professional & Estate Aluminum Mini-Blind System A) Headrail Steel B) Pinion Rod (Tilt Rod) Hexagonal C) End Stiffeners D) Cold Lock E) Wand Tilter F) Tape Drum (Ladder Drum) G) Tape Drum Support (Cradle) H) Box Installation Bracket I) Wand Clear Hexagonal J) Cord Ladder K) Lift Cord 1.4mm L) Cord Tassels M) Bottomrail Plugs N) Bottomrail C Shape O) Bottomrail End Caps P) Slats Q) Cord Safety Rings R) Hold Down Brackets Optional Mariak Professional Mini Blind 6-Gauge Aluminum Slats Mariak Estate Mini Blind 8-Gauge Aluminum Slats System Features: Heavy Duty Metal and Plastic Components Want Tilter has a clutch mechanism preventing over-rotation and repairs (3)
1-1/2 x 1 Elite & Elite Plus Contoured Aluminum Mini-Blind System F A H G B K D C E L I P N M J O Q A) Headrail Steel B) Pinion Rod (Tilt Rod) Hexagonal C) Headrail End Caps (Clear) D) Cord Lock E) Wand Tilter F) Tape Drum (Ladder Drum) G) Tape Drum Support (Cradle) H) Hidden Installation Bracket I) Wand Clear Hexagonal J) Cord Ladder K) Lift Cord 1.4mm L) Cord Tassels M) Bottom Rail Plugs N) Bottomrail C Shade O) Bottomrail End Caps P) Slats Q) Hold Down Brackets - Optional Mariak Elite Mini Blind 6-Gauge Aluminum Slats Mariak Elite Plus Mini Blind 8-Gauge Aluminum Slats System Features: Integrated Headrail with Light Blocking Lip Snap-in Hidden Installation Brackets Heavy Duty Metal and Plastic Components Wand Tilter has a clutch mechanism preventing over-rotation and repairs (4)
Mini-Blind Options & Surcharges Optional Surcharges Common Mini-Blind Surcharges: Undersized Blinds (12" and less in width) = $20.00 (net charge) Oversized Blinds (greater than 120" in length) = $10.00 (net charge) Tile Cut Blinds with a 5 1/2" maximum cutout on each side = $7.00 per side (net charge) Center Cutout Blinds = $40.00 (net charge) Slanted Top Blinds = $125.00 (net charge) 2-on-1 Headrail Blinds = $30.00 (net charge; use overall width and length and then add surcharge) 3-on-1 Headrail Blinds = $50.00 (net charge; use overall width and length and then add surcharge) Side Definition Channels = $2.00 per foot for both sides (net charge) Sill Definition Channels = $1.00 per foot (net charge) Motorized Tilt Only Blinds = (Quote Required) Classic Blinds (19.5mm ladder spacing 15.7 slats/ft.) = 5% (surcharge) Lightmaster Privacy Blinds (18.0mm ladder spacing 16.9 slats/ft.) = 10% (surcharge) Multi-Color Blinds = $15.00 for the 1 st extra color & $6.00 for each additional color (net charge) Levolor Riviera and Mariak Dynasty Mini-Blind Surcharges: Sheerview Perforated Slat Blinds = 30% (surcharge) Metallic, Pearlized, & Native Stone Slat Blinds = 10% (surcharge) Top-Lock Cord Lock = $1.00 (net charge) Ring Pull = $1.00 (net charge) Cord Tilter = $5.00 (net charge) Universal Ring Tilter = $13.00 (net charge) Restrictive Tilter = $4.00 (net charge); degrees available: 0-70, 0-90, 45-45, 60-60, & 75-75 Tilt Poles: 4 Foot = $18.00 (net charge); 6 to 10 Foot Adjustable = $24.00 (net charge) Pivot Plates = $1.00 (net charge); allow 4 weeks for production of custom-made brackets Pocket Brackets = $1.50 (net charge) Manufacturing Notes: Blinds 12" and less in width require center tilt and no lift controls. Blinds between 12" and 18" in width require split controls. Side Channels only available with 1 1/2" headrail. Unless specified, mini-blinds will be manufactured as Contract Blinds (21.5mm ladder 14.2 slats/ft.) (5)
Mini-Blinds Available & Price Table Listing Type of Mini-Blind Headrail Slat Options Ladder Options Components Mariak Contractor 1" x 1" 6 Gauge Snap-In Parts Mariak Residential 1" x 1" 8 Gauge Classic (15.7 slats/ft) Snap-In Parts Mariak Professional 1 1/2" x 1" 6 Gauge Snap-In Parts Mariak Estate 1 1/2" x 1" 8 Gauge Classic (15.7 slats/ft) Snap-In Parts Mariak Builder 1" x 1" 6 Gauge Builder (13.5 slats/ft) Snap-In Parts Mariak Builder Plus 1 1/2" x 1" 6 Gauge Builder (13.5 slats/ft) Snap-In Parts Mariak Elite Contoured 1 1/2" x 1" 6 Gauge Mariak Elite Contoured Plus 1 1/2" x 1" 8 Gauge Levolor Riviera 1 1/2" x 1" 6 & 8 Gauge Dynasty Commercial 1 1/2" x 1" 6 Gauge Dynasty Architect 1 1/2" x 1" 8 Gauge Note: Classic (15.7 slats/ft) Classic (15.7 slats/ft) Classic (15.7 slats/ft) Classic (15.7 slats/ft) Dynasty Blinds use Mariak mini-blind color selector with all metal headrail parts that are locked into place. The Mariak Builder and Mariak Builder Plus blinds are available by contract request only. Snap-In Parts (Clear end caps only) Snap-In Parts (Clear end caps only) Clinch-In Metal Parts Locked-In Metal Parts Locked-In Metal Parts Mini-Blind Price Table Listing Options: Type of Mini-Blind Type of Slat Material Standard Metallic Perforated Mariak Contract - Contractor Blind with 1" x 1" & 6-gauge gauge slat 1 2 N/A Mariak Contract - Residential Blind with 1" x 1" & 8-gauge slat 2 3 + 15% 4 Mariak Contract - Professional Blind with 1.5"x 1" & 6-gauge slat 2 3 N/A Mariak Contract - Estate Blind with 1.5" x 1" & 8-gauge slat 3 3 + 15% 4 Mariak Contract Elite Contoured Headrail with 6-gauge slat 2 + 10% N/A N/A Mariak Contract Elite Contoured Headrail with 8-gauge slat 3 + 10% N/A N/A Add an additional 5% for Classic Ladder Spacing (19.5mm 15.7 slats per foot); Only available for 8-gauge slats Add an additional 10% of Privacy Ladder Spacing (18.0mm 16.9 slats per foot); Available for both 6-gauge & 8-gauge slats Options: Type of Mini-Blind Type of Slat Material Standard Metallic Perforated Levolor Riviera Contract with 1.5" x 1" & 6-gauge slat 2 2 + 10% N/A Levolor Riviera Contract with 1.5" x 1" & 8-gauge slat 3 3 + 10% 3 + 30% Add an additional 5% for Classic Ladder Spacing (19.5mm 15.7 slats per foot); Only available for Levolor Riviera with 8-gauge slats Add an additional 10% of Privacy Ladder Spacing (18.0mm 16.9 slats per foot); Available for Levolor Riviera with 6-gauge & 8-gauge slats Options: Type of Mini-Blind Type of Slat Material Standard Metallic Perforated Dynasty Contract Commercial with 1.5" x 1" & 6-gauge slat 2 3 N/A Dynasty Contract Architect with 1.5" x 1" & 8-gauge slat 3 3 + 15% 4 Add an additional 5% for Classic Ladder Spacing (19.5mm 15.7 slats per foot); Only available for 8-gauge slats Add an additional 10% of Privacy Ladder Spacing (18.0mm 16.9 slats per foot); Available for both 6-gauge & 8-gauge slats Notes: Contract Blind denotes 21.5 mm ladder (14.2 slats/ft.) Classic Blind denotes 19.5 mm ladder (15.7 slats/ft.) Privacy Blind denotes 18.0 mm ladder (16.9 slats/ft.) & offset route hole Builder Blind denotes 22.5 mm ladder (13.5 slats/ft.); Limited Color Options (6)
Aluminum Color Listing Mariak Mini-Blind Color Listing Mariak Brand Mini-Blinds Mariak Dynasty Mini-Blinds Contractor Professional Residential Estate Elite/Elite Plus Commercial Architect 1 x 1 Headrail 1 ½ x 1 Headrail 1 x 1 Headrail 1 ½ x 1 Headrail Contoured 1 ½ x 1 Headrail 1 ½ x 1 Headrail 1 ½ x 1 Headrail 6-Gauge Slats 6-Gauge Slats 8-Gauge Slats 8-Gauge Slats 6 & 8 Gauge Slats 6-Gauge Slats 8-Gauge Slats Standard Aluminum Colors 005 White Gloss X X X X X X X 006 Raw Umber X X X X Not Available X X 011 Beige X X X X X X Not Available 015 Federal Blue Not Available X Not Available Not Available Not Available X Not Available 017 Gulf Blue Not Available X Not Available Not Available Not Available X Not Available 020 Chinese Red Not Available X Not Available Not Available Not Available X Not Available 026 Smokey Grey X X X X Not Available X X 031 Fawn X X X X X X X 033 Pitch Black X X Not Available Not Available Not Available X Not Available 042 Matte White X X X X Not Available X X 062 Char Brown X X X X X X X 065 Alm. Gloss White X X X X X X Not Available 082 Pale Pink X X Not Available Not Available Not Available X Not Available 089 True Blue X X X X X X Not Available 100 Vanilla X X Not Available Not Available Not Available X Not Available 104 Biscuit X X X X X X Not Available 106 Garnet Red X X X X X X X 112 Alabaster X X X X X X X 121 Brushed Alum. X X X X X X X 130 Angel Food X X X X X X Not Available 137 Misty Grey Not Available X Not Available Not Available Not Available X Not Available 169 Pearl X X Not Available Not Available Not Available X Not Available 173 Spun Silk X X Not Available Not Available Not Available X Not Available 201 Navajo X X Not Available Not Available Not Available X Not Available 205 White Satin X X X X X X X 217 Angel Dust X X Not Available Not Available Not Available X Not Available 228 Sand X X X X X X Not Available 233 Black Satin X X X X X X X 260 Vanilla X X X X Not Available X X 282 Malt X X Not Available Not Available Not Available X Not Available 350 Forest Green X X Not Available Not Available Not Available X Not Available 386 Snow Cap X X X X X X Not Available 413 Hunter Green X X X X Not Available X X 496 Cream White X X Not Available Not Available Not Available X Not Available 502 Yellow White X X Not Available Not Available Not Available X Not Available 544 True White X X Not Available Not Available Not Available X Not Available 724 Almond X X X X X X X 771 Mercury X X Not Available Not Available Not Available X Not Available 963 Stucco X X Not Available Not Available Not Available X Not Available Metallic Aluminum Colors 064 Aluminum Text. X X X X Not Available X X 144 Sky Jewel Not Available X Not Available Not Available Not Available X Not Available Perforated Aluminum Colors P49 Perf. Black Not Available Not Available X X Not Available Not Available X P64 Perf. Aluminum Not Available Not Available X X Not Available Not Available X P65 Perf. White Not Available Not Available X X Not Available Not Available X X Designates that the Aluminum Color is available for the specific Mini-Blind. (7)
Levolor Mini-Blind Color Listing Aluminum Color Listing Riviera Riviera 1 ½ x 1 Headrail 1 ½ x 1 Headrail 6-Gauge Slats 8-Gauge Slats Standard Aluminum Colors 031 Polished Aluminum X X 034 Brushed Aluminum X X 110 White X X 111 Cotton X X 112 Alabaster X X 113 White Cap Not Available X 115 Dover X X 116 Polar Bear X X 137 Almond X X 148 Vanilla X X 201 Ivory X X 202 Blush White X X 268 Real Red X X 275 Garnet Red X X 292 Gingersnap Not Available X 310 Sand X X 312 Greige X X 316 Malibu Sand X X 365 Mushroom X X 368 Beacon Brown Not Available X 384 Rich Earth Not Available X 571 Cactus Sage X X 590 Sherwood Green X X 637 China Blue X X 641 Evening Shadows X X 685 Royal Navy X X 765 Wood Violet Not Available X 815 Birch Not Available X 820 Squirrel Gray X X 860 Mercury X X 862 Pearl Gray X X 870 U.N. Gray X X 885 Dark Bronze X X 887 Raw Umber X X 890 Black X X 892 Low Gloss Black X X Metallic Aluminum Colors 915 Copperite Not Available X Perforated Aluminum Colors 034 Perf. Brushed Alum. Not Available X 110 Perf. White Not Available X 112 Perf. Alabaster Not Available X 885 Perf. Dark Bronze Not Available X 892 Perf. Low Gloss Black Not Available X 4-10-12 kb (8)
Length Selling Table 1 1" Aluminum Mini-Blinds Type of Mini-Blind Mariak Contractor Headrail Gauge Colors 1" x 1" 6 Standard Width 23 26 29 32 36 40 44 48 52 57 62 67 72 82 92 102 112 122 132 142 42 46.00 50.00 54.00 58.50 64.50 72.00 76.00 80.50 86.50 98.00 104.00 110.50 118.00 132.00 144.50 164.50 177.50 195.50 206.50 224.00 48 50.00 56.00 60.00 64.50 70.00 77.50 85.00 90.50 97.00 106.50 114.00 120.50 128.00 144.50 157.50 174.00 194.50 213.00 230.00 241.00 54 55.00 60.00 66.50 70.50 77.50 85.50 91.50 99.00 103.50 117.00 124.00 132.00 140.50 159.00 174.00 186.50 201.00 220.50 241.00 261.00 60 59.00 66.50 70.50 77.50 85.00 91.00 98.00 103.00 112.50 125.50 138.50 146.00 154.50 172.00 187.00 203.50 224.00 249.50 264.00 284.50 66 63.00 70.50 77.50 83.50 90.00 97.50 103.50 113.50 120.50 136.50 146.00 155.00 162.00 185.50 201.50 225.50 253.00 267.00 281.50 307.00 72 68.00 75.00 81.50 89.50 94.00 103.00 113.00 121.50 134.50 146.50 157.50 165.50 177.50 199.50 219.50 250.00 269.50 291.00 315.00 334.00 78 72.00 79.50 87.50 92.00 102.00 111.50 120.50 132.00 145.00 159.50 167.00 178.00 196.50 216.50 241.00 264.50 286.50 304.50 332.00 359.00 84 75.00 85.50 92.50 102.00 112.00 121.50 131.50 143.50 158.50 172.00 181.50 197.00 216.00 240.00 263.50 287.50 311.00 335.00 355.50 384.50 90 81.00 90.50 100.50 110.50 121.00 132.00 143.50 157.50 172.00 183.00 195.50 214.50 235.50 259.50 285.50 307.00 333.00 359.50 389.50 425.00 96 84.00 94.00 103.00 115.00 130.50 143.50 157.50 172.50 184.00 201.00 218.00 234.00 257.00 282.50 309.00 332.50 361.50 392.00 422.00 455.00 102 89.50 97.00 110.00 123.50 139.50 153.00 171.50 184.00 201.50 218.50 235.00 258.00 277.00 307.00 333.00 361.00 396.00 418.50 447.50 482.00 108 91.50 102.50 113.50 129.50 146.00 163.50 183.00 200.50 219.50 235.50 259.50 280.00 302.50 332.50 364.00 395.00 420.00 451.00 482.00 516.00 114 98.00 107.50 119.50 133.50 153.50 171.50 188.00 208.50 227.50 244.00 268.50 293.50 313.50 350.00 385.00 418.50 452.50 482.00 518.50 559.50 120 102.50 113.50 125.50 142.50 159.50 183.00 198.00 223.00 241.00 268.00 292.50 310.00 341.50 378.00 416.50 442.00 478.50 516.50 556.00 596.50 126 109.00 120.00 132.50 153.00 168.00 193.50 210.00 235.00 257.00 281.50 307.00 322.50 353.00 389.50 427.50 459.00 497.50 545.00 584.50 634.50 132 113.00 125.50 140.00 165.00 180.00 205.50 222.00 245.50 269.50 294.00 320.00 334.50 366.50 412.00 447.00 478.50 516.00 560.00 604.00 655.50 138 118.50 132.50 146.50 175.50 190.50 218.00 234.50 257.00 280.50 307.00 333.50 349.00 379.50 436.00 471.50 502.00 539.50 590.50 629.50 681.00 144 124.00 141.50 154.50 186.50 202.00 230.50 246.00 269.50 294.00 320.00 348.00 361.50 393.50 456.00 491.00 521.00 557.50 606.00 651.00 704.50 DB L 4.50 5.00 6.00 6.50 7.50 8.00 9.00 9.50 10.00 11.50 12.50 13.50 14.50 16.00 18.50 20.00 22.50 24.50 26.00 28.50 DL X 14.26 15.50 17.36 18.60 21.08 23.56 25.42 27.90 30.38 32.86 35.34 38.44 42.16 47.12 53.94 58.90 65.10 70.68 76.26 82.46 Includes Single Slat Valance. Double Slat Valance & Deluxe Slat Valances are optional upgrades. For Aluminum blinds, valance returns are not standard for inside mount. Common Mini-Blind Surcharges Options: Classic Ladder (19.5mm - 15.7 slats/ft.) 5% Privacy Ladder (18.0mm - 16.9 slats/ft.) 10% Undersized Blind (12" and less in width) $20.00 Net Oversized Blind (greater than 120" in length) $10.00 Net Side Tile Cutout $7.00 Net Center Tile Cutout $40.00 Net 2-on-1 Headrail Blind $30.00 Net 3-on-1 Headrail Blind $50.00 Net Slanted Top Blind $125.00 Net Side Definition Channels = $2.00 / Foot Charge Sill Definition Channels $1.00 / Foot Charge Multi-Color Blind $15.00 for first extra color Net Charge $6.00 for additional color Net Charge Freight Included for shades up to 92". Shades 92 1/8" to 125" in width shipped via FedEx: $75.00 per unit Net Freight Charge Shades 125 1/8" or greater in width shipped via Common Carrier: $ 150.00 per shipment Additional freight will apply and a freight quote is required for orders over 25 blinds. Quantities above 25 shades, please use our internet system for quoting, or contact our contract department. All prices are in U.S. Dollars and do not include freight, duties or taxes for shipments to Alaska, Hawaii or Canada. GST and VAT are not included. Other restrictions and surcharges may apply. See Freight Policy for complete details. Budget Selling 03.30.12 js 04.02.12kb
Length 1" Aluminum Mini-Blinds Selling Table 2 Type of Mini-Blind Mariak Contractor Mariak Residential Mariak Professional Mariak Elite Integrated Contoured Headrail Levolor Riviera Mariak Dynasty Commercial Headrail Gauge Colors 1" x 1" 6 Metallic 1" x 1" 8 Standard 1 ½" x 1" 1 ½" x 1" 6 6 Standard Standard (Add 10% to Grid) 1 ½" x 1" 6 Standard 1 ½" x 1" 6 Standard Width 23 26 29 32 36 40 44 48 52 57 62 67 72 82 92 102 112 122 132 142 42 66.34 71.30 76.26 83.70 92.38 102.92 108.50 114.08 122.76 139.50 148.80 158.10 167.40 189.10 206.46 234.36 254.20 278.38 295.12 318.68 48 71.30 79.98 86.18 92.38 99.82 110.36 120.90 128.96 137.64 151.90 163.06 172.98 181.04 206.46 225.06 247.38 277.14 303.80 327.98 343.48 54 77.50 86.18 94.24 100.44 110.36 121.52 131.44 140.74 148.18 165.54 176.70 188.48 199.64 226.92 247.38 265.98 286.44 315.58 343.48 372.00 60 84.32 94.24 100.44 110.36 120.90 130.20 139.50 147.56 160.58 179.18 196.54 208.32 219.48 244.90 267.22 290.16 318.68 355.88 376.96 406.10 66 90.52 100.44 110.36 119.66 128.34 138.26 148.18 162.44 172.98 194.68 208.32 220.72 230.64 264.12 287.68 321.78 359.60 380.68 401.14 437.72 72 96.72 107.26 116.56 127.10 133.30 147.56 161.82 174.22 192.20 209.56 225.06 235.60 254.20 284.58 313.72 356.50 385.02 414.78 448.88 476.78 78 102.92 112.84 124.62 132.06 146.32 159.34 172.98 189.10 207.08 228.16 238.08 254.82 279.62 308.76 343.48 376.96 408.58 434.62 474.30 511.50 84 107.26 121.52 132.68 146.32 159.96 174.22 187.86 205.22 226.30 244.90 258.54 280.86 306.90 342.24 375.10 409.82 442.68 478.64 507.16 548.70 90 114.70 128.96 142.60 158.10 173.60 189.10 205.22 225.06 244.90 260.40 278.38 305.66 336.66 370.14 407.34 437.72 475.54 512.12 555.52 605.12 96 120.28 133.30 147.56 164.30 186.00 205.22 225.06 245.52 262.26 286.44 310.62 333.56 367.04 402.38 440.20 474.92 515.84 558.00 602.02 647.90 102 126.48 137.64 156.24 176.08 197.78 217.62 244.28 262.26 287.68 311.86 336.04 368.90 394.94 437.72 475.54 514.60 564.82 597.68 637.98 686.96 108 131.44 146.94 162.44 184.14 208.32 233.12 260.40 285.20 313.72 336.66 370.14 398.66 432.14 474.92 518.94 562.96 600.16 643.56 686.96 735.32 114 139.50 153.14 170.50 190.96 218.24 244.28 268.46 296.98 323.64 347.82 383.16 419.74 447.64 499.72 549.32 597.68 644.18 686.96 739.66 797.32 120 146.94 162.44 179.18 202.74 228.16 260.40 282.72 317.44 343.48 381.92 417.88 441.44 486.70 539.40 593.34 629.92 682.62 735.94 793.60 639.84 126 153.76 171.74 188.48 212.66 237.46 272.18 287.68 327.36 362.70 393.70 429.66 455.08 502.82 554.90 605.12 646.04 711.14 755.16 830.80 871.72 132 160.58 179.18 199.02 226.30 246.76 281.48 304.42 338.52 383.78 407.96 440.82 466.24 519.56 569.78 617.52 663.40 726.02 778.10 846.30 888.46 138 166.16 186.00 207.08 237.46 256.68 291.40 319.92 355.88 402.38 424.08 458.80 483.60 531.34 582.80 632.40 680.76 742.14 792.98 875.44 916.98 144 174.84 193.44 216.38 247.38 267.22 302.56 335.42 370.14 421.60 441.44 475.54 497.86 546.22 595.82 644.80 695.02 751.44 812.82 895.90 936.82 DLX VAL 14.26 15.50 17.36 18.60 21.08 23.56 25.42 27.90 30.38 32.86 35.34 38.44 42.16 47.12 53.94 58.90 65.10 70.68 76.26 82.46 Includes Double Slat Valance. For Aluminum blinds, valance returns are not standard for inside mount. Common Mini-Blind Surcharges Options: Levolor Mini-Blind Surcharge Options: Classic Ladder (19.5mm - 15.7 slats/ft.) 5% Sheerview Perforated Slat Blinds 30% Privacy Ladder (18.0mm - 16.9 slats/ft.) 10% Metallic Slat Blinds 10% Undersized Blind (12" and less in width) $20.00 Net Pearlized Slat Blinds 10% Oversized Blind (greater than 120" in length) $10.00 Net Native Stone Slat Blinds 10% Side Tile Cutout $7.00 Net Top-Lock Cord Lock $1.00 Net Charge Center Tile Cutout $40.00 Net Ring Pull $1.00 Net Charge 2-on-1 Headrail Blind $30.00 Net Cord Tilter $5.00 Net Charge 3-on-1 Headrail Blind $50.00 Net Universal Ring Tilter $13.00 Net Charge Slanted Top Blind $125.00 Net Restrictive Wand Tilter $4.00 Net Charge Side Definition Channels = $2.00 / Foot Charge (Available as: 0 o -70 o, 0 o -90 o, 45 o -45 o, 60 o -60 o, & 75 o -75 o ) Sill Definition Channels $1.00 / Foot Charge Multi-Color Blind $15.00 for first extra color Net Charge $6.00 for additional color Net Charge Freight Included for shades up to 92". Shades 92 1/8" to 125" in width shipped via FedEx: $75.00 per unit Net Freight Charge Shades 125 1/8" or greater in width shipped via Common Carrier: $ 150.00 per shipment Additional freight will apply and a freight quote is required for orders over 25 blinds. Quantities above 25 shades, please use our internet system for quoting, or contact our contract department. All prices are in U.S. Dollars and do not include freight, duties or taxes for shipments to Alaska, Hawaii or Canada. GST and VAT are not included. Other restrictions and surcharges may apply. See Freight Policy for complete details. Budget Selling 03.30.12 js 04.02.12kb
Length Selling Table 3 1" Aluminum Mini-Blinds Type of Mini-Blind Mariak Estate Mariak Estate Mariak Residential Mariak Professional Mariak Elite Integrated Contoured Headrail Levolor Riviera Mariak Dynasty Commercial Mariak Dynasty Architect Mariak Dynasty Architect Headrail Gauge Colors 1 ½" x 1" 8 Standard 1 ½" x 1" 8 Metallic (Add 15% to Grid) 1" x 1" 1 ½" x 1" 8 6 Metallic (Add 15% to Grid) Metallic 1 ½" x 1" 8 Standard (Add 10% to Grid) 1 ½" x 1" 8 Standard 1 ½" x 1" 6 Metallic 1 ½" x 1" 8 Standard 1 ½" x 1" 8 Metallic (Add 15% to Grid) Width 23 26 29 32 36 40 44 48 52 57 62 67 72 82 92 102 112 122 132 142 42 70.13 75.88 81.12 89.49 96.82 108.33 115.13 122.46 130.83 148.63 159.09 166.94 178.46 200.44 219.28 250.15 270.04 296.21 313.48 339.64 48 75.88 84.78 91.58 96.82 106.24 117.75 128.22 137.64 147.06 161.19 173.75 183.17 193.63 219.28 239.69 263.76 294.64 323.42 348.54 365.81 54 83.21 91.58 101.00 106.76 117.75 129.26 139.21 149.67 157.52 176.89 188.40 200.44 212.47 241.26 263.76 283.12 304.58 334.93 365.81 395.64 60 90.01 101.00 106.76 117.75 128.22 138.68 148.63 157.00 170.61 191.54 208.81 222.42 234.45 260.62 284.17 309.81 339.64 378.89 400.87 431.23 66 95.77 106.76 117.75 126.12 137.11 147.58 157.52 172.18 183.17 207.24 222.42 235.50 245.44 281.03 305.10 342.78 383.08 404.54 426.52 465.77 72 103.10 114.09 124.03 136.07 141.30 157.00 171.65 184.21 205.15 222.94 239.69 251.20 270.04 303.01 333.36 379.42 409.25 442.22 477.80 507.63 78 108.33 119.84 131.88 139.73 154.91 169.04 183.17 200.44 220.85 241.78 253.82 270.56 298.30 328.13 365.81 401.40 434.89 462.63 504.49 543.74 84 114.09 129.26 140.78 154.91 170.08 184.21 199.39 218.23 240.21 260.62 274.75 298.82 327.08 364.24 400.35 435.94 471.52 509.20 540.08 584.04 90 122.98 137.64 152.29 166.94 183.69 200.44 218.23 239.69 260.62 276.84 296.21 325.51 357.96 393.02 433.32 465.77 505.54 544.79 590.84 644.22 96 127.17 141.30 157.00 174.79 197.30 218.23 239.69 261.14 278.94 304.58 331.27 355.87 390.41 428.09 468.38 505.02 548.98 595.03 641.08 690.28 102 135.54 147.06 166.42 186.83 210.90 231.84 259.05 278.94 305.10 331.79 357.44 391.98 420.24 465.77 505.54 546.88 600.79 635.33 678.76 731.10 108 139.21 156.48 172.18 195.73 222.42 248.58 276.84 303.53 333.36 357.96 393.02 424.95 460.01 505.02 553.16 599.22 638.47 685.04 731.10 782.91 114 148.63 162.76 181.60 203.58 232.36 259.05 285.74 315.57 344.88 370.00 407.68 445.88 476.23 531.18 584.56 635.33 686.09 731.10 786.57 849.37 120 156.48 172.18 191.54 216.14 241.78 276.84 300.39 338.07 365.81 406.11 444.83 469.95 518.62 574.62 632.19 670.39 726.91 783.43 844.14 904.84 126 162.76 179.50 199.39 225.56 253.82 288.88 312.43 355.87 384.13 429.66 462.63 499.26 546.88 609.16 666.73 705.45 761.45 823.20 902.23 950.90 132 170.61 185.78 207.76 233.41 263.24 301.96 326.56 370.00 399.83 453.21 486.18 527.52 576.71 641.08 701.79 741.56 796.51 860.36 947.23 998.52 138 176.89 194.16 217.71 241.26 273.70 312.43 336.50 384.13 414.48 473.62 507.11 554.21 607.59 677.19 737.38 775.06 839.95 897.52 992.76 ###### 144 183.17 201.48 226.08 251.20 283.12 326.56 348.02 398.78 428.09 493.50 528.57 579.85 634.80 710.16 777.67 812.21 871.87 935.20 ###### ###### DLX VAL 14.26 15.50 17.36 18.60 21.08 23.56 25.42 27.90 30.38 32.86 35.34 38.44 42.16 47.12 53.94 58.90 65.10 70.68 76.26 82.46 Includes Double Slat Valance. For Aluminum blinds, valance returns are not standard for inside mount. Common Mini-Blind Surcharges Options: Levolor Mini-Blind Surcharge Options: Classic Ladder (19.5mm - 15.7 slats/ft.) 5% Sheerview Perforated Slat Blinds 30% Privacy Ladder (18.0mm - 16.9 slats/ft.) 10% Metallic Slat Blinds 10% Undersized Blind (12" and less in width) $20.00 Net Pearlized Slat Blinds 10% Oversized Blind (greater than 120" in length) $10.00 Net Native Stone Slat Blinds 10% Side Tile Cutout $7.00 Net Top-Lock Cord Lock $1.00 Net Charge Center Tile Cutout $40.00 Net Ring Pull $1.00 Net Charge 2-on-1 Headrail Blind $30.00 Net Cord Tilter $5.00 Net Charge 3-on-1 Headrail Blind $50.00 Net Universal Ring Tilter $13.00 Net Charge Slanted Top Blind $125.00 Net Restrictive Wand Tilter $4.00 Net Charge Side Definition Channels = $2.00 / Foot Charge (Available as: 0 o -70 o, 0 o -90 o, 45 o -45 o, 60 o -60 o, & 75 o -75 o ) Sill Definition Channels $1.00 / Foot Charge Multi-Color Blind $15.00 for first extra color Net Charge $6.00 for additional color Net Charge Freight Included for shades up to 92". Shades 92 1/8" to 125" in width shipped via FedEx: $75.00 per unit Net Freight Charge Shades 125 1/8" or greater in width shipped via Common Carrier: $ 150.00 per shipment Additional freight will apply and a freight quote is required for orders over 25 blinds. Quantities above 25 shades, please use our internet system for quoting, or contact our contract department. All prices are in U.S. Dollars and do not include freight, duties or taxes for shipments to Alaska, Hawaii or Canada. GST and VAT are not included. Other restrictions and surcharges may apply. See Freight Policy for complete details. Budget Selling 03.30.12 js 04.02.12kb
Length Selling Table 4 Type of Mini-Blind Mariak Residential Mariak Estate Mariak Dynasty Architect 1" Aluminum Mini-Blinds Headrail Gauge Colors 1" x 1" 8 Perforated 1 ½" x 1" 8 Perforated 1 ½" x 1" 8 Perforated Width 23 26 29 32 36 40 44 48 52 57 62 67 72 82 92 102 112 122 132 142 42 71.37 78.00 83.46 91.65 100.62 111.93 118.56 125.58 134.55 152.49 163.02 171.60 183.30 205.92 225.42 257.01 277.29 304.20 322.14 349.05 48 78.00 86.97 93.99 100.62 109.59 120.90 131.82 141.57 150.15 165.75 178.23 187.98 198.90 225.42 246.48 271.44 302.25 332.28 358.80 375.96 54 85.41 93.99 102.96 110.37 120.90 132.60 143.52 154.05 161.85 181.74 193.05 205.92 218.40 248.04 271.44 290.94 313.17 344.76 375.96 406.77 60 92.43 102.96 110.37 120.90 131.82 142.74 152.49 161.07 175.50 196.17 214.89 228.15 241.02 267.54 291.72 317.46 349.05 389.22 411.84 443.43 66 98.28 110.37 120.90 129.87 140.79 151.71 161.85 177.45 187.98 212.94 228.15 241.80 252.33 289.38 314.34 351.39 393.90 415.74 438.36 478.92 72 105.30 116.61 127.14 139.23 145.86 161.07 176.67 189.93 210.21 228.93 246.48 257.79 277.29 311.22 342.81 390.00 420.81 454.74 491.01 521.82 78 111.93 123.63 136.11 144.30 159.51 173.94 187.98 205.92 226.20 248.82 260.13 278.07 306.15 337.35 375.96 412.62 446.55 474.63 517.92 559.26 84 116.61 132.60 145.08 159.51 174.72 189.93 204.75 223.86 247.26 267.54 282.75 306.93 336.57 373.62 411.06 448.11 484.77 523.38 554.97 599.82 90 126.36 141.57 156.78 171.60 189.15 205.92 223.86 246.48 267.54 284.31 304.20 334.62 367.77 404.43 444.99 478.92 519.48 560.04 607.62 661.83 96 130.65 145.86 161.07 179.79 203.19 223.86 246.48 268.32 286.26 313.17 340.08 365.04 400.92 439.92 481.26 518.70 563.55 611.13 658.71 709.02 102 138.45 150.15 170.82 192.27 216.45 238.29 266.76 286.26 314.34 340.86 366.99 402.87 432.12 478.92 519.48 562.38 617.37 652.86 697.71 751.14 108 143.52 160.29 177.45 201.24 228.15 255.45 284.31 312.39 342.81 367.77 404.43 436.80 472.29 518.70 568.23 615.81 655.98 703.95 751.14 804.57 114 152.49 167.31 186.42 208.65 239.07 266.76 293.28 324.87 354.51 380.25 418.86 457.86 489.45 545.61 600.60 652.86 705.12 751.14 808.47 872.04 120 160.29 177.45 196.17 222.30 248.82 284.31 308.88 347.10 375.96 417.69 456.30 482.82 532.35 590.85 649.74 689.13 747.24 805.35 867.75 930.15 126 166.53 186.42 206.31 232.83 259.35 300.30 324.09 364.65 398.58 440.31 483.21 514.41 563.94 621.66 701.61 728.13 788.19 848.64 909.87 978.51 132 173.16 195.39 216.06 243.36 269.88 316.29 338.91 382.98 421.59 463.32 510.51 546.39 595.14 653.25 736.32 766.35 828.75 891.93 950.82 ##### 138 179.40 204.36 225.81 254.67 281.19 332.28 354.12 400.53 444.60 486.33 537.81 577.59 626.34 684.84 771.42 804.96 869.70 935.61 994.89 ##### 144 186.03 213.72 235.56 265.20 291.72 347.88 369.33 418.47 466.83 508.95 564.72 609.18 657.54 716.04 806.13 844.35 910.65 978.90 ##### ##### DLX VAL 14.26 15.50 17.36 18.60 21.08 23.56 25.42 27.90 30.38 32.86 35.34 38.44 42.16 47.12 53.94 58.90 65.10 70.68 76.26 82.46 Includes Double Slat Valance. For Aluminum blinds, valance returns are not standard for inside mount. Common Mini-Blind Surcharges Options: Classic Ladder (19.5mm - 15.7 slats/ft.) 5% Privacy Ladder (18.0mm - 16.9 slats/ft.) 10% Undersized Blind (12" and less in width) $20.00 Net Oversized Blind (greater than 120" in length) $10.00 Net Side Tile Cutout $7.00 Net Center Tile Cutout $40.00 Net 2-on-1 Headrail Blind $30.00 Net 3-on-1 Headrail Blind $50.00 Net Slanted Top Blind $125.00 Net Side Definition Channels = $2.00 / Foot Charge Sill Definition Channels $1.00 / Foot Charge Multi-Color Blind $15.00 for first extra color Net Charge $6.00 for additional color Net Charge Freight Included for shades up to 92". Shades 92 1/8" to 125" in width shipped via FedEx: $75.00 per unit Net Freight Charge Shades 125 1/8" or greater in width shipped via Common Carrier: $ 150.00 per shipment Additional freight will apply and a freight quote is required for orders over 25 blinds. Quantities above 25 shades, please use our internet system for quoting, or contact our contract department. All prices are in U.S. Dollars and do not include freight, duties or taxes for shipments to Alaska, Hawaii or Canada. GST and VAT are not included. Other restrictions and surcharges may apply. See Freight Policy for complete details. Budget Selling 03.30.12 js 04.02.12kb
575 West Manville Street, Rancho Dominguez, CA 90220 Customer Service Fax: (800) 459-6999 / International Fax: (310) 763-1749 PH: (800) 562-7425 / (310) 661-4400 Purchase Order 1" Mini-Blinds Page of Account #: Company Name: Contact: Purchase Order #: Ship To Address: Phone: Sidemark: City: State: Zip: Fax: Date Required: EMAIL: Ship Via (circle one): FedEX Common Carrier Mariak Truck Will Call Line Sidemark Qty Mount 1 Width Length Headrail Type 2 Slat Type 3 Color 4 Ladder Type 5 Tilt Type 6 Tilt 7 Lift 8 Valance 9 Hold Downs Spacer Block 1 2 3 4 5 6 7 8 9 10 Purchase Order Footnotes: 1. Mount: (IM) - Inside Mount 6. Tilt Type: (W) - Wand Tilt (OM) - Outside Mount (C) - Cord Tilt (Surchargeable - Available with Riviera & Dynasty mini-blinds only) 2. Headrail Type: (1") - 1" x 1" Mariak Brand Headrail (M) - Motorized Tilt (Surchargeable - Available with 1 ½" headrail only) (1 ½") - 1 ½" x 1" Mariak Brand Headrail 7. Tilt Control: (L) - Left Side Tilt (Standard) (ELT) - Contoured Integrated Headrail (R) - Right Side Tilt (RIV) - 1 ½" x 1" Levolor Riviera Brand Headrail (C) - Center Tilt (Required for blinds less than 11" in width) (DYN) - 1 ½" x 1" Mariak Dynasty Headrail 8. Lift Cord: (R) - Right Side Lift Cord (Standard) 3. Slat Type: (6) - 6 Gauge Slat Thickness (L) - Left Side Lift Cord (8) - 8 Gauge Slat Thickness 9. Valance Type: (SNG) - Single Slat Valance 4. Color: Specify the color # and name. (DBL) - Double Slat Valance 5. Ladder Type: (Contract) - 21.5mm / 14.2 Slats/Ft. ( Standard) (DLX) - Deluxe Double Slat inserted in Valance Channel (Classic) - 19.5mm / 15.7 Slats/Ft. (Surcharge) (Privacy) - 18.0mm / 16.9 Slats/Ft. ( Surcharge) (Builder) - 22.5mm / 13.5 Slats/Ft. (By Quote Only) 3-30-12 kb