Fiber Optic Products Catalog No epoxy, no polish, no crimp Two fibers in one ferrule MT-RJ Patch Panel Jack packages include: 6 MT-RJ Jacks 2 Actuator Tools 1 Fiber Guide 1 Icon Wheel Bend Limiting Boots available Half the size of an SC Duplex No bench tool required Tunable Can be re-terminated MT-RJ High Density Patch Panel Jack High-density, two-fiber jacks are epoxyless and pre-polished for consistent performance. Jacks fit into 6-position snap-in adapter plate in the Tyco Electronics Patch Panel, which enables 24 ports in a 1U space, equaling the density of copper. The jacks also fit into a snapin adapter plate for use in existing rack and wall mount enclosures. Jacks are used with industry standard 250µm and 900µm tight buffered fiber. The kit includes 6 patch panel jacks, fiber guides, 2 actuator keys, icon wheel, and dust covers. 62.5/125µm Multimode 50/125µm Multimode XG (850nm LO 50/125µm) Multimode Color Used With 50/125µm Multimode Black 250µm Coated Fiber 1278303-1 900µm Tight Buffered Fiber 1588880-1 XG (850nm LO 50/125µm Multimode Gray 250µm Coated Fiber 1278303-4 900µm Tight Buffered Fiber 1588880-3 62.5/125µm Multimode Beige 250µm Coated Fiber 1278303-2 900µm Tight Buffered Fiber 1588880-2 Note: Bend Limiting Boots purchased separately - see page 54 for part numbers. No epoxy, no polish, no crimp Jack version eliminates the need for separate coupler Comes with actuation tool, bend limiting boot, and SL Series compatible housing Half the size of an SC Duplex Two fibers in one ferrule Tunable Can be re-terminated MT-RJ Outlet Jacks This two-fiber, pre-polished, epoxyless fiber jack fits into existing RJ-45 style jack workstation faceplate openings and most conventional wall boxes. The MT-RJ workstation jack length has been reduced so that it is now comparable to a copper jack. This feature reduces the possible interference with outlet boxes or furniture raceway systems. It can be re-terminated and is suitable for use with industry standard fiber cable or ribbon fiber innovations. The kit includes a one-piece jack, 110 housing, fiber guide, actuator key, and dust cover. Jack Type Jack Color 50/125µm Multimode Black 1278414-X XG (850nm LO 50/125µm) Multimode Gray 1-1278414-2 62.5/125µm Multimode Beige 1278415-X X denotes jack color: -1=Red, -2=Yellow, -3=Green, -4=Blue Easy 3-Step Termination 50 Copyright 2004 by Tyco Electronics Corporation. All Rights Reserved. Dimensions are in millimeters with inches in brackets unless otherwise Cleave Strip Lock
MT-RJ SECURE Optical Fiber Cabling System Tyco Electronics MT-RJ SECURE Optical Fiber Cabling System offers all the features and benefits of the standard MT-RJ System with an extra advantage for network security. Today s facilities often employ more than one network and need a measure of mechanical security to limit access and prevent inadvertent cross-connection. The MT-RJ SECURE Cabling System features molded slots on the plug and molded keys on the latching jack to reduce the chance of unauthorized connections. There are four key-slot combinations - each color-coded - to assist identification of the correct jack. Simply stated, the plug and jack Fiber Optic Products Catalog colors must match or the keying will prevent them from carrying the signal. MT-RJ SECURE plugs will only mate with the same color MT-RJ Secure Jacks. The MT-RJ SECURE components have the same form as the standard MT-RJ products, so they fit into conventional RJ-45 faceplates and patch panel cutouts and use the same installation tools and procedures. Plugs, jacks and cable assemblies are all available for a complete end-to-end solution for your 50-micron, 62.5-micron, XG (850nm LO 50-micron) and singlemode systems. Connectors/Adapters/ Tooling & Accessories 1 MT-RJ SECURE Patch Panel Jacks No epoxy, no polish, no crimp MT-RJ SECURE Patch Panel Jacks include: 6 MT-RJ SECURE Jacks 2 Actuator tools 1 Fiber guide 1 Icon wheel Half the size of SC Duplex and ST-style connectors No bench tool required Tunable Can be re-terminated Used With 50/125µm Multimode 250µm Coated Fiber 1278807-X 900µm Tight Buffered Fiber 1588879-X XG (850nm LO 50/125µm) Multimode 250µm Coated Fiber 1693951-X 900µm Tight Buffered Fiber 1693949-X 62.5/125µm Multimode 250µm Coated Fiber 1278808-X 900µm Tight Buffered Fiber 1588878-X X denotes jack color: -1=Red, -2=Yellow, -3=Green, -4=Blue Pack of six Note: Bend Limiting Boots purchased separately - see page 54 for part numbers. MT-RJ SECURE Outlet Jacks No epoxy, no polish, no crimp Two fibers in one ferrule Jack version eliminates the need for a separate coupler MT-RJ SECURE Cabling System offers color-coded, mechanically keyed jacks and plugs to limit access to secure networks MT-RJ SECURE Outlet Jacks include: Actuation tool Bend limiting boot SL Series compatible housing Used With 50/125µm Multimode 900µm Tight Buffered Fiber 1278811-1 XG (850nm LO 50/125µm) Multimode 900µm Tight Buffered Fiber 1754252-X 62.5/125µm Multimode 900µm Tight Buffered Fiber 1278810-X X denotes jack color: -1=Red, -2=Yellow, -3=Green, -4=Blue SL Series housing color matches jack color Other housing colors available Copyright 2004 by Tyco Electronics Corporation. All Rights Reserved. Dimensions are in millimeters with inches in brackets unless otherwise 51
Fiber Optic Products Catalog MT-RJ Connectors Designed to meet TIA/EIA 568B.3 Wide industry and electronics supplier acceptance and support Multimode and singlemode versions for existing and future network applications MT-RJ Plug is half the size of duplex SC and ST connectors MT-RJ Jack is installable in conventional RJ-45 faceplates and outlet boxes MT-RJ Jack is easily terminated no epoxy or polishing and can be re-terminated, making moves, adds, and changes less expensive Intuitive RJ-45 type latching mechanism MT-RJ Plug kits available in multimode and singlemode versions for both Mini DUALAN and Mini Zipcord cable MT-RJ Plugs The MT-RJ plugs are available in multimode and singlemode versions, with or without guide pins, for both Mini DUALAN and Mini Zipcord cable. The MT-RJ plug components are bulk packaged in quantities of 100 to make it easy for cable assembly houses to distribute the product to the assembly area. MT-RJ Multimode Plug Kit without guide pins MT-RJ Multimode Plug Kit with guide pins MT-RJ Singlemode Plug Kit without guide pins MT-RJ Singlemode Plug Kit with guide pins MT-RJ Multimode Plug Kit without guide pins MT-RJ Multimode Plug Kit with guide pins MT-RJ Singlemode Plug Kit without guide pins MT-RJ Singlemode Plug Kit with guide pins 1278398-1 1278398-2 1278399-1 1278399-2 1278750-1 1278750-2 1278751-1 1278751-2 MT-RJ Cable Assemblies See Cable Assemblies & Backplane Interconnects Section 2, page 75-78. MT-RJ Loopbacks MT-RJ to Singlemode Loopback 1278358-1 MT-RJ to Multimode Loopback, 50/125µm 1278357-1 MT-RJ to Multimode Loopback, 62.5/125µm 1278153-1 52 Copyright 2004 by Tyco Electronics Corporation. All Rights Reserved. Dimensions are in millimeters with inches in brackets unless otherwise
SL Series Outlets Front-loading modules snap in and out for easy access Modular approach for flexibility Invisible icon holes stay hidden until used Individual jacks and inserts increase configuration and color-coding options Fiber Optic Products Catalog See page 50 for MT-RJ Outlet Jacks. See page 51 for MT-RJ SECURE Outlet Jacks. Connectors/Adapters/ Tooling & Accessories 1 MT-RJ Optical Patch Panel Tyco Electronics MT-RJ optical patch panels feature 24-port (48 fiber) capacity in a 1U high rack mounted enclosure and offer twice the fiber density of conventional patch panels. Features include pre-installed cable management, rugged cable entry strain relief, and a sliding, tilt-out drawer for easy termination of tight buffer or loose tube cable. Adjustable mounting brackets allow the user to mount the enclosure in forward, flush or recessed positions. The patch panel is supplied ready for MT-RJ jack installation. 1U Patch Panel with four, six-position MT-RJ interface housing Cable Management 1206704-4 Rings (2 pieces), Cable Glands PG16, PG13.5, Dust Caps (24 pieces). (Jack modules not included) MT-RJ Snap-In Adapter Plate The MT-RJ snap-in adapter plate manages six MT-RJ Patch panel jacks (ordered separately). The adapter plate is designed to fit into existing rack and wall mount enclosures with the benefit of industry standard labels and icons for port identification. MT-RJ Snap-In Adapter Plates (Jack modules not included) 1278328-3 Copyright 2004 by Tyco Electronics Corporation. All Rights Reserved. Dimensions are in millimeters with inches in brackets unless otherwise 53
Fiber Optic Products Catalog MT-RJ Bend Limiting Boots 1374208-X X denotes color: -1=Black, -2=Beige, -3=Blue Compatible with all MT-RJ Jacks Come in packages of six or bulk pack of 150 Color Pack of Six Black 1374208-1 Bulk Pack of 150 Black 1374208-7 Pack of Six Beige 1374208-2 Bulk Pack of 150 Beige 1374208-8 Pack of Six Blue 1374208-3 Bulk Pack of 150 Blue 1374208-9 MT-RJ Pigtail Jack Assemblies MT-RJ Pigtail Jack Assemblies offer both singlemode and multimode fusion or mechanical splice options Compatible with MT-RJ Jack Snap-In Adapter Plates and Enclosures Spliceable pigtail assembly 250µm fiber in protective 900µm tubing Color 50/125µm Multimode Black 1374018-X 62.5/125µm Multimode Beige 1374019-X Singlemode Blue 1374020-X X denotes length: -1=1m, -2=2m, -3=3m MT-RJ SECURE Pigtail Jack Assemblies Color Red 1588568-X Singlemode Yellow 1588569-X Green 1588571-X Blue 1588570-X X denotes length: -1=1m, -2=2m, -3=3m MT-RJ Pigtail Plug Assemblies Color 50/125µm Multimode Black 1588849-X 62.5/125µm Multimode Beige 1693532-X Singlemode Blue 1693533-X X denotes length: -1=1m, -2=2m, -3=3m Offers the same MT-RJ SECURE features, such as color coded, mechanically keyed jacks and plugs to limit access to secure networks Compatible with MT-RJ Jack Snap-In Adapter Plates and Enclosures Spliceable pigtail assembly Compatible with MT-RJ Plug Snap-In Adapter Plates Spliceable pigtail assembly 250µm fiber in protective 900µm tubing MT-RJ Plug Assemblies compatible with fusion or mechanical splices 54 Copyright 2004 by Tyco Electronics Corporation. All Rights Reserved. Dimensions are in millimeters with inches in brackets unless otherwise
MT-RJ Termination Tool Kits Fiber Optic Products Catalog / CORELINK Splice MT-RJ Plug Termination Kit Tool Kit for termination of the MT-RJ Plug in handy plastic case. Contents are as follows: Cleave Pen, 1278745-1 Jacket/Buffer/Coating Stripper, KEVLAR Shears, Strip Template, Cable Clamps, Cure Fixtures, Crimp Tool, Die Sets, Epoxy Dispensers MT-RJ Jack Termination Kit Tool Kit for termination of the MT-RJ Jacks in handy soft case. Contents are as follows: Cleave Tool, 1278346-1 Buffer/Coating Strip Tool, Micro Stripper, Kevlar Shears, MT-RJ Jack Strip Length Template, Actuator Key, Alcohol Wipes Universal Termination Kit Tool Kit for termination of LIGHTCRIMP, 1278949-2 LIGHTCRIMP Plus, and MT-RJ Jacks Combination LIGHTCRIMP PLUS ST, SC, LC, & MT-RJ Jack Termination Kit - includes crimp tool, 1278118-4 ST/SC/LC die sets, stripper tools, kevlar shears, ST and SC cable holder and cleave tool KEVLAR is a trademark of E. I. Dupont de Nemours and Company. Connectors/Adapters/ Tooling & Accessories 1 CORELINK Splice Permanent, easy-to-use fiber splice Reusable High performance for singlemode and multimode Designed to TIA/EIA 568-b.3 Clamping mechanism prevents torsional failure Accommodates both 250 µm and 900 µm buffers Applications Outside Plant Fiber-in-the-Loop Fiber-to-Jumper Splicing Premises Networks Testing Emergency Restoration Tyco Electronics CORELINK Splice is an easy-to-use, high-performance mechanical splice for 125 µm singlemode and multimode fibers. It s unique clamping mechanism is activated with a simple key; no other tooling is required. The transparent material allows the crafts person to both see and feel the fiber position. The CORELINK Splice is re-mateable either fiber can be removed and replaced in the splice at any time. CORELINK Splices can be housed in a variety of splice trays for placement in closures, ONUs, and fiber enclosures. Instruction Sheet 408-4019 CORELINK splices 12 pack Includes 2 keys (singlemode) 503577-1 CORELINK splices 12 pack Includes 2 keys (multimode) 503901-1 2 Replacement keys in key holder 503681-1 Holder for up to 6 CORELINK splices Mount on splice trays or in distribution boxes 559066-1 Splice Tray Holds up to 12 CORELINK splices for use in Tyco Electronics closures and distribution boxes 559067-1 1.5" x 2.4" elastomer holder for 6 CORELINK splices. Mount on splice trays or in distribution boxes. Performance Characteristics Mean Splice Loss <0.3 db Mean Return Loss -26 db Temperature Range -0 to 60 C CORELINK Splice Workstation 503605-1 Instruction Sheet 408-4131 Splice Tray holds 12 splices 559067-1 Universal Fiber Optic Cleaving Tool 503924-1 Copyright 2004 by Tyco Electronics Corporation. All Rights Reserved. Dimensions are in millimeters with inches in brackets unless otherwise 55