Report Test Report

Similar documents
Report VNNF Test Report

Report VNLF Test Report

~~oeti. Report VN71 O Classification Report. Reference

~,oeti. Report VN Classification Report. Reference

Report Classification Report on Burning Behaviour

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

Analysis Report

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

Forbo Flooring Attn. Mr. A. Tijhof Postbus AA Krommenie. Report. Sponsor : Contractor, manufacturer : Forbo Flooring. Lot. No. : 66869/3877.

ISO INTERNATIONAL STANDARD

Shipboard incinerators with capacities up to 4000 kw


CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

Test Report: ICL/CR15/11/087

ISO INTERNATIONAL STANDARD

This document is a preview generated by EVS

Conformity assessment procedures for the Alarm Components Scheme

ISO INTERNATIONAL STANDARD

BCTC CARPET TECHNICAL CENTRE

This document is a preview generated by EVS

TFI Report Classification

Rubber and plastics hoses Method of test for flammability

Centexbel. General certification regulations. Construction products

RetardantsInc. The Decision You Make May Save A Life! 123 Columbia Court North Suite 201 Chaska, MN 55318

ISO/TS TECHNICAL SPECIFICATION. Fire detection and alarm systems Part 9: Test fires for fire detectors

Classification of reaction to fire performance in accordance with EN : A1: 2009 on Superfoil SFNC. Prepared for:

Camping tents (ISO 5912:2011)

INTERNATIONAL STANDARD

Loss Prevention Standard

ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials

Classification Report Reaction to fire of building elements DIN EN :2007. Class E

ISO INTERNATIONAL STANDARD

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

CLASSIFICATION REPORT

ISO 7491 INTERNATIONAL STANDARD. Dental materials Determination of colour stability. Produits dentaires Détermination de la stabilité de couleur

ISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion

Coatings for protection of FRP structures with heavy rain erosion loads

Development of a European approach to assess the fire performance of facades

ISO INTERNATIONAL STANDARD

Circuit Breakers JANUARY The electronic pdf version of this document found through is the officially binding version

KN-KWL 110 SE-EC Kontrollierte Wohnraumlüftung KN

This document is a preview generated by EVS

INTERNATIONAL STANDARD

TFI Report Reaction to fire test

BLUE ANGEL The German Ecolabel Electric Hand Dryers DE-UZ 87 Basic Award Criteria Edition May 2014 Version 3

ISO/TS TECHNICAL SPECIFICATION. Road vehicles Air filters for passenger compartments Part 1: Test for particulate filtration

Provläsningsexemplar / Preview TECHNICAL REPORT. Part 3-1: Conformity verification report for IEC :2001 General requirements

TFI Report Classification

CAN/ULC-S109 Flame Resistance of "Argo" Fabric

INTERNATIONAL STANDARD

ISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting

Belcom Cable excellence engineered through quality. CPR Construction Products Regulation

INTERNATIONAL STANDARD

EN ISO 9001 ÖNORM. Quality management systems Requirements. Edition: EN ISO 9001: Cor.1: (consolidated version)

Analysis Report

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD

Form: KSD-100:10 Page 1 of 3

This document is a preview generated by EVS

ISO INTERNATIONAL STANDARD

White paper. Construction Product Regulations* by Multimedia Connect. Which cables are concerned by these new regulations?

Analysis Report

ISO/TS TECHNICAL SPECIFICATION

CAN/ULC-S109 Flame Resistance of "Xanadu" Material

This document is a preview generated by EVS

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Footwear Test methods for whole shoe Washability in a domestic washing machine

ISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing

CLASSIFICATION OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN :2007+A1:2009

FAÇADE FIRE TESTS Towards a new European standard method

Test Report No

ISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

INTERNATIONAL STANDARD

Test on extruded rigid PVC profile for concrete formwork at 50 kw/m² irradiance in

YOUR GUIDE TO UNDERSTANDING CPR

LICENCE. to use the European Mark

INTERNATIONAL STANDARD

LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 03 Wien,

Classification of reaction to fire performance in accordance with BS EN : A1: 2009 on Sandwich Panel, WP 50.

BLUE ANGEL The German Ecolabel Stationary air conditioners DE-UZ 204 Basic Award Criteria Edition August 2016 Version 1

ECB S Recommendation for Service, Repair and Modification Operations on ECB S Certified Secure Storage Units, Data Cabinets and Data Rooms

MGN 453 (M) Maritime and Coastguard Agency Logo MARINE GUIDANCE NOTE

INTERNATIONAL STANDARD

LICENCE. to use the European Mark

This document is a preview generated by EVS

Glass fibre rovings - Non-metallic materials

ISO 7779 INTERNATIONAL STANDARD. Acoustics Measurement of airborne noise emitted by information technology and telecommunications equipment

INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Protective gloves for firefighters Laboratory test methods and performance requirements

INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 2: Determination of shear strength

ISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Classification Report

Transcription:

ÖTI Institut für Ökologie, Technik und Innovation GmbH Report 70384 Test Report Applicant Camira Fabrics Ltd Meltham Mills, HD94AY Huddersfield GROSSBRITANNIEN Reference Mr. Daniel Young Application Determination of burning behaviour, smoke emission and dropping behaviour according to ÖNORM A 3800-1. Test Material "Chateau Plus" Material used in testing was anonymized for laboratory purposes. A detailed sample list is contained in the report. Issuing and Signatures Number of pages contained: 5 Original Issue / Vienna 2013-02-01 / da/kk 5309 Authorised for Institute Astrid Damböck... ÖTI Institut für Ökologie, Technik und Innovation GmbH Spengergasse 20 A-1050 Wien Austria Tel. +43 1 5442543-0 Fax +43 1 5442543-10 Email office@oeti.at Web www.oeti.at FN: 326826b UID-Nr ATU65149029 UniCredit Bank Austria AG BLZ 12000 Konto 23410378800 Iban AT941200023410378800 Swift BKAUATWW Eori ATEOS1000015903 Es gelten ausschließlich unsere Allgemeinen Geschäftsbedingungen Only our General Terms and Conditions apply

Report 70384 2 / 5 Contents 1 Order... 2 1.1 Chronology... 2 1.2 Samples... 2 2 Findings / Tests performed... 3 2.1 Description of the specimen... 3 2.2 Test and evaluation of burning behaviour excluding building products... 3 2.3 Determination and of dropping behaviour... 4 2.4 Determination of smoke emission... 4 3 Remarks... 5 1 Order 1.1 Chronology Date Received Order 2013-01-24 2013-01-25 Determination of burning behaviour, smoke emission and dropping behaviour according to ÖNORM A 3800-1. 1.2 Samples No. Received Sample Identification 1 2013-01-24 (1) "Chateau Plus" (1) Samples provided by the customer. (2) Sample drawn by ÖTI.

Report 70384 3 / 5 2 Findings / Tests performed 2.1 Description of the specimen Description of the specimen according to DIN 60 000 Type of fibre according to DIN ISO 2076 Technological description Polyolefinfibre (PERFENTEX ) (declaration by the applicant) woven fabric 2.2 Test and evaluation of burning behaviour excluding building products Test conditions Standard: ÖNORM A 3800-1 point 4.1 Arrangement of the sample: loose Evaluation criteria Test 1 2 3 Ignition of the not flamed specimen [yes/no] no no no Afterflame time [min:sec] 0:00 0:00 0:00 Afterglow time [min:sec] 0:00 0:00 0:00 Undestroyed length of flamed specimen [cm] 31 29 32 Note to the burning behaviour: The damage of the specimen was caused by shrinking/melting out of the range of the flame effect and not by charring and/or burning; therefore it is no destruction caused by direct flame effect in the sence of ÖNORM A 3800-1. According to the classification criteria of ÖNORM A 3800-1, point 4.1, the tested sample can be classified as "Brennbarkeitsklasse - schwerbrennbar" 1) 1) In the withdrawn standard ÖNORM B 3800-1:1988 classified as "Brennbarkeitsklasse B1-schwerbrennbar"

Report 70384 4 / 5 2.3 Determination and of dropping behaviour Test Conditions Standard: ÖNORM A 3800 part 1 item 4.3 Type of specimen: woven fabric Kind of flaming: Schlyterbrenner Test Results dropping number of drops falling down kindling Test 1 no 0 no Test 2 yes 6 no Test 2 Yes > 10 no The tested specimen can be classified according to ÖNORM A 3800-1, item 4.3.1 as: Tropfenbildungsklasse Tr 2 - tropfend 2.4 Determination of smoke emission Test Conditions Standard: ÖNORM A 3800 part 1/4.2 Specimen: woven fabric Arrangement of the specimen: loose smoke emission [%] Test 1 Test 2 Test 3 Test 4 Test 5 Mean Value 5 1 2 4 4 3 The tested specimen can be classified according to ÖNORM A 3800-1, item 4.2.1 as: Qualmbildungsklasse Q1 - schwachqualmend

Report 70384 5 / 5 3 Remarks Validity There are no regulations concerning duration of validity in the individual test standards. As the results of the examinations refer only to the submitted and examined samples, the report is valid for these for an unlimited period. A period of validity specified as part of an expert evaluation is in the discretion of the consultant or the ÖTI. The applicability of results and expert evaluations for materials not tested is in the responsibility of the applicant. Whereby an apportionment of results as well as any specified period of validity can only be done for identically constructed products and only as long as the product produced unchanged. Possible national or international restrictions concerning the terms of usability of test and classification reports have to be considered; this is not the responsibility of the test laboratory. Sample Material Results of performed tests only refer to the sample material provided. Without explicit written other agreement testing is destructive and the sample material is transferred to the property of ÖTI, which is entitled to freely decide on storage and disposal. Issuance The valid first issue is done in paper and has single-handed signatures. For reference purposes and filing an unsigned electronic duplicate can be delivered in pdf format. Duplicates and translations will be marked accordingly on the cover sheet. Quality management and accreditations All tests and services are performed under a quality management system according to EN ISO/IEC 17025 respectively EN ISO/IEC 17065. The ÖTI is accredited as Test Laboratory and as Certification Body for products. It also is a Notified Body for several directives with the registration number 0534 (see http://ec.europa.eu/enterprise/newapproach/nando/). The accreditation by the Federal Ministry of Economy, Family and Youth as testing laboratory was repeated under reference BMWFJ-97.714/0198-I/12/2012. Individual accredited test procedures are marked with the federal laboratory logo. Details and other accreditations are given on request and can be found on www.oeti.biz. Copyright und Usage Notes It is pointed out, that any alterations, amendments or falsifications of reports not authorized by the issuer of the report will be prosecuted as civil and criminal offences; this especially to the appropriate requirements of ABGB, UrhG, UWG and criminal law and their respective international equivalents. Reports are protected under international copyright laws. Written consent of the ÖTI is required for publications (also in excerpt) and reference to tests for public relation purposes. Reports may only be reproduced in full length. End of Report