Effective Date: April, 0 Dehumidifiers Model 0/0/0F/0W A B 0 A B Filter, 0 x x EZK (0 & 0)* Filter, x x EZK (0F Only) Internal Control Board User Interface Assembly Wiring Access Door UI Control Hole Cover * Filter Access Door 0/0 Outlet Duct Panel * 0 Backflow Damper * Inlet Duct Panel * Outlet Cover * 0 Pint Dehumidifier Fan Pint Dehumidifier Fan Transformer and Wire Harness * Not Compatible with 0F **Drain tube only included with 0F 0 A B C 0A 0B Low Temperature Sensor High Temperature Sensor Leveling Foot* Compressor Run Capacitor, 0pt/pt, MFD, 0VAC Fan Run Capacitor, MFD, 0VAC, used on Models 0 and with Serial Number before 0A0 Fan Run Capacitor, MFD, 0VAC, used on Models 0 and with Serial Number 0A0 or later Fan Run Capacitor, MFD, 0VAC, used on Models 0(F)(W) and RH & Temp Sensor Drain Tube + Fittings** Compressor Overload Switch, 0pt Compressor Overload Switch, pt OTHER PARTS (Not Shown) Low Profile Condensate Pump Basement Kit (-0 N/O Dampers, -0 N/C Dampers & Transformer) Digital Dehumidifier Control (for all current dehumidifiers) Living Space Duct Kit ( of insulated flex duct with quick install grilles and reducers) Dehumidifier Hanging Kit 0 0 P.O. Box Madison, WI 0- Phone: 00/-0 Fax: 0/- www.aprilaire.com Form No. 0B. Printed in the U.S.A 0 Aprilaire Division of Research Products Corporation
Model 0/0F/0W A B 0 Filter, x x EZK (0) Filter, x x EZK (0F) Internal Control Board, Deh User Interface Assembly, Deh Wiring Access Door, AA Deh Hole Cover, UI Ctrl, Deh Door, Filter Access, AA Deh Outlet Duct Panel, Deh Backflow Damper, 0, Deh Inlet Duct Panel, AA Deh Cover, Outlet, AA Deh 0 0 A B 0 Fan, 0pt Deh, with 0MFD Capacitor (0) Wire Harness, Power, Deh Sensor, Low Temperature, Deh Sensor, High Temperature, Deh Leveling Foot, Deh Capacitor, 0MFD, 0VAC Capacitor, 0MFD, 0VAC Capacitor, MFD, 0VAC RH Sensor, Deh Drain Tube + Fitting Compressor Overload Switch 0
Model 0A with R0A A B 0 Dehumidistat Control Assembly Digital Dehumidifier Control Backflow Damper Impeller with Bracket (Blower Assembly) Leveling Foot Control PCB Assembly High Temperature Cutout Switch Low Temperature Cutout Switch Filter Access Door Assembly Dehumidistat Hole Cover Outlet Cover Plate Air Filter Inlet/Outlet Screen Duct Collars Auxiliary drain pan Capacitor, µf Compressor Overload Switch Condensate Drain Hose Assembly 0VA Transformer with Wire Harness Capacitor, 0MF for Impeller OTHER PARTS Low Profile Condensate Pump (Condensate pump with 0 condensate hose) Living Space Duct Kit ( of insulated flex duct with quick install grilles) Living Space Duct Kit ( of insulated flex duct with quick install grilles and reducers) Part No. replaced by Part No. replaced by 0 0 0
Model 0A/0A/0A
PART NO. A B 0 A B A B Filter Drain Trap/Collars/Manual Backflow Damper * Blower/Motor Assembly, 0A/0A and 00/0/0 Blower/Motor Assembly, 0A and 0/0 Power Supply Board Power Supply Board (new style without integrated transformer) Control Board Kit *** Sensor Board Duct Collars Drain Trap and PVC Elbow Filter Door ** Condensate Drain Hose Assembly (included with Model 0A only) LED Control Door 0 VA Transformer Capacitor, 0µF (Model 0A only) Capacitor, µf Daughter Board High Temperature Cutout Switch Compressor Overload Switch, 0A/0A Compressor Overload Switch, 0A Frost Sensor OTHER PARTS External Control **** Convertible Installation Kit (-N/O Damper, -N/C Damper and Transformer) Distributor and nozzle, 0A/0A Low Profile Condensate Pump (condensate pump with 0 condensate hose) Living Space Duct Kit ( Of Insulated Flex Duct With Quick Install Grilles) Living Space Duct Kit ( of insulated flex duct with quick install grilles and reducers) Identifying Type of Control by Terminal Block Model 0A/0A/0A Model 00/0/0/0/0 0 See Table Below * The backflow damper (Part No. ) is compatible with all Models 0A, 0A, but only with Model 0A with Serial Numbers greater than 0AA0. ** Part is the blue/gray door; the almond colored doors are no longer available. *** If control board being replaced is currently used with a Model 0 Control, the control must be replaced with a Model Control. **** Only use a Model 0 Control to replace an existing Model 0 control with units produced before Serial Number 0AAXXXXXX. NO. PART DESCRIPTION Compatible With QTY/CTN PART NO. A Power Supply Board Control Board without DH Terminal B Power Supply Board (new style without integrated transformer) Control Board with DH Terminal 0 DH Terminal implemented on all units with Serial Number 0AAXXXXXX or later. 0 0 0 P.O. Box Madison, WI 0- Phone: 00/-0 Fax: 0/- www.aprilaire.com Form No. 0B. Printed in the U.S.A 0 Aprilaire Division of Research Products Corporation