MXL/MXLV 19 Rack Mount Equipment Models: MXL-RK1, ACM-RK, MKB-RK, MMB-RK, MOM-RK, MPS-RK, TSP-RK, VSM-RK, CABLES-RK, MKB-3 ENGINEER AND ARCHITECT SPECIFICATIONS Standard 19 Rack Mounting for MXL and MXLV System Modules Rack Mount Sheet Metal Adapter Brackets Use Standard MXL/MXLV Modules 19 Rack Enclosure Shipped Complete NO Assembly Required Listed Description The RK Series of adapter plates provide the option of standard 19 rack mounting of MXL and MXLV system modules. The MXL-RK1 is a 70 inch high standard 19 wide x 18 deep rack package supplied complete with UL 864 listing directly from Cerberus Pyrotronics. The MXL-RK1 is supplied assembled with all side, back and top panels. The front door comes with a lock assembly using the same key as other Cerberus Pyrotronics enclosures. The door comes with a clear, fire rated plexiglass lens installed. MXL-RK1 also comes with a battery tray and all necessary mounting hardware. This equipment is approved for operation over the temperature range of 0 C to 49 C. All MXL modules require one or more of the following 19 rack mount adapter plates to mount inside the MXL-RK1. MXL and MXLV modules must be ordered seperately, the following are mounting plates: ACM-RK Voice Module Mounting Plate The ACM-RK mounting is 17½ high by 19 wide and has mounting space available for (1) ACM-1 Audio Control Module, (1) MMM-1 Master Microphone Module, (1) TMM-1 Telephone Master Module, (1) TBM-2 Terminal Block Module, and (1) PIM-1 Peripheral Interface Module. CATALOG NUMBER ACM-RK 5057
MKB-RK MXL/V Display and Control Keypad Mounting Plate The MKB-RK Mounting Plate is high by 19 wide and has space available for (1) MKB-3 MXL Display and Control Keypad Module and (1) PIM-1 Peripheral Interface Module. MMB-RK MKB-RK MKB-3 MXL/V 19 Rack Mount Display and Control Keypad The MKB-3 is a fully functional MXL/V system display and control keypad module. The MKB-RK is required to mount the MKB-3 in the MXL-RK1 standard 19 wide rack mount enclosure. Only the MKB-3 is designed for use in the MXL- RK1 enclosure. MKB-3 should be ordered in place of other MXL/V model displays (MKB-1, MKB-2, MKB-4) for 19 rack mount use. The MKB-3 is configured via the MXL/V custom software generator program - AccuLINK and is addressed via a dipswitch on the MKB-3 s ANN-1 circuit board. MOM-RK MXL Expansion Module Cardcage Mounting Plate The MOM-RK mounting plate is 17½ high by 19 wide and has mounting space available for up to 3 MXL/V Expansion cardcages (MOM-4, MOM-2, OMM-1 or OMM-2) in any combination. The MXL-MPFO mounting plate may also be mounted on the MOM-RK to allow mounting of D2300CP Fiber Optic Interface Modules or CCU/M Pager Interface Modules. By using the MOM-RK with the appropriate cardcage the following MXL/V modules may be mounting in the MXL-RK1 rack: MOM-4 / MOM-2 ALD-2I CSM-4 CZM-4 CMI-300 CRM-4 NET-7/7M NIM-1R REP-1 XLD-1 OMM-1 / OMM-2 OCC-1 / BTC-1 ASC-1 ASC-2 PLC-4/PL864-25A/PL864-25S/PL864-70A RCM-1 ZC1-8B ZC2-8B ZC2-4AB ZC3-4AB ZCT-8B ZAC-30 MKB-3 MMB-RK MMB and PSR Mounting Plate The MMB-RK mounting plate is high by 19 wide and allows mounting for either (1) MMB MXL Main Mother Board or (1) PSR Remote Power Supply Module. MOM-RK MPS-RK MXL/V Power Supply Mounting Plate The MPS-RK mounting plate is 8¾ high by 19 wide and allows mounting for up to (2) MPS-6 or MPS-12 Power Supplies.
CABLES-RK 19 Rack Mount Extended Interconnect Cables The CABLE-RK kit contains (4) extended length MXL and MXLV interconnection cables. It contains: (1) ACM to TMM-1 24 Cable (1) ACM to ANN-1 24 Cable (1) MMB to Battery 60 Cable (1) MMM-1 to ACM-1 6 Cable Ordering Information MPS-RK TSP-RK Internal Strip Printer Mounting Plate The TSP-RK is a 12½ high by 19 wide mounting plate set for mounting (1) TSP-40 Internal Thermal Strip Printer in the MXL-RK1 19 rack mount enclosure. The TSP-RK comes with a U-shaped plate with mounting studs for the TSP-40 printer. It is also supplied with a dress plate and clear lens. Model Description Part Number MXL-RK1 70 Inch High Vertical 19 Rack 500-69347 ACM-RK Voice Module Mounting Plate 500-89304 MKB-RK MKB-3 MXL Display Mounting Plate (for MKB-3) MXL 19 Rack Mount Display/Control Keypad 500-89304 500-89350 MMB-RK MMB/PSR Mounting Plate 500-89304 MOM-RK MOM/OMM Mounting Plate 500-89305 MPS-RK MPS-6/MPS-12 Mounting PLate 500-89304 TSP-RK TSP-40 Mounting Plate 500-89304 VSM-RK VSM/VLM/VFM/VSB Mounting Plate 500-89304 CABLES-RK Rack Mount Expansion Cables 500-89304 Installation Instructions 315-09340 TSP-RK VSM-RK MXL/V VSM-1/VLM-1/VFM-1/VSB-1 Mounting Plate The VSM-RK mounting plate is 7 high by 19 wide and provides mounting space for any combination of up to (6) VSM-1 Voice Switch/LED Module, VLM-1 Voice LED Module, VFM-1 Fan Control Module or VSB-1 Blank Plates. VSM-RK
Mounting Diagram 12 17½ 17½ 7 70 7 9 MXLV (with Voice) Mounted on 19 Rack
12 17½ 70 9 MXL (without Voice) Mounted on 19 Rack
NOTICE: The use of other than Cerberus Pyrotronics detectors and bases with Cerberus Pyrotronics control equipment will be considered a misapplication of Cerberus Pyrotronics equipment and as such void all warranties either expressed or implied with regards to loss, damage, liabilities and/or service problems. Cerberus Pyrotronics 8 Ridgedale Avenue Cedar Knolls, NJ 07927 Tel: (201) 267-1300 FAX: (201) 397-7008 Website: www.cerbpyro.com 4/97 10M CPY-IG Printed in U.S.A. Cerberus Pyrotronics 50 East Pearce Street Richmond Hill, Ontario L4B, 1B7 CN Tel: (905) 764-8384 FAX: (905) 731-9182 April 1997 Supersedes sheet dated 12/96