Flash Flood Portable self-contained eyewash station, clas sified as a personal (se condary) eyewash device, provides flexible emergency eyewash capability in economical systems. Includes a 1 gallon container of Eyesaline solution providing three full minutes of gravity-fed flow. The protective nozzle covers are easily pulled off in an emergency and each nozzle has a built-in filter for extra protection. SA421 SA403 Porta-Stream I, II & III Self-contained high-impact polyethylene units mount on any wall or sit on a level surface. Single pull strap, once activated, leaves workers hands free to hold eyes open. Available in 70 oz. or 180 oz. units. Each unit supplied with an emergency eyewash sign and Eyesaline concentrate to mix with water. Optional dust cover available to keep flushing area free of contaminants. Removal of cover pulls off retainer caps and activates flow. Porta-Stream III is electrically heated thermos tatically to 72 F and will operate in temperatures to -32 F. Unit is protected with an insulated cover. Note: Eyesaline concentrate, once opened has a six month life. SA42 SA419 Flash Flood SA419 32-000400-0000 Eyewash Station (Eng. Inst.) 14 SAM67 32-000400-0022 Eyewash Station (Fr. Inst.) 14 Eyesaline SA403 32-000401-0000 1 Gal. Refill (4/Pkg.) (Eng. Inst.) 36 SAM68 32-000401-0022 1 Gal. Refill (4/Pkg.) (Fr. Inst.) 36 SA420 32-000402-0000 Wire Rack for Cartridges 3 SA421 32-000403-0000 Replacement Pull Strap 1 Eyewash Stations Wall stations provide job site convenience and immediate acces sibility. Visible with full emergency use instructions in front. Constructed of sturdy high-impact plastic. Available in single 16-oz. or double 32-oz. full squeeze bottles or with empty spout and eye cup bottle. Solution is sterile isotonic. Includes four predrilled holes for easy wall mounting. Empty spill spout and eye cup bottles available separately. Ideal for high eye hazard areas. SA408 Porta-StreAm I SA42 32-000100-0020 6 gal, 6 min. Flush (Eng. inst.) 19 SAM66 32-000100-0022 6 gal, 6 min. Flush (Fr. inst.) 19 Porta-Stream II SA427* 32-000200-0020 16 gal., 1 min. Flush (Eng. inst.) 36 SAJ676* 32-000200-0022 16 gal., 1 min. Flush (Fr. inst.) 36 Porta-Stream III SA428* 32-000310-0020 Freeze Protected 1 min. flush (Eng. inst.) 42 SAP448* 32-000310-0022 Freeze Protected 1 min. flush (Fr. inst.) 42 Eyesaline concentrate SA408 32-00009-0020 70 oz. (For Porta-Stream I) SA411 32-00013-0020 180 oz. (For Porta-Stream II & III) 13 Water Preservative SAJ670 32-001100-0000 4-8 oz. Bottles (English) - SAJ677 32-001100-0022 4-8 oz. Bottles (French) - Replacement parts SA426 32-000102-0000 Replacement Pull-Strap 1 SA412 32-00017-0000 Dust Cover 1 (Fits Porta-Stream I and II) * SEI Certified to meet ANSI Z38.1 standard Size" Single Stations SAK72* E/A3827 W/Empty 16 oz. Spill Spout and Eye Cup 11 x 14 SAK726* E/A3832 Panel Only 11 x 14 SR370 E/A3840 W/32 oz. Squeeze Bottle 6 1/2 x 11 SR371 E/A3837 Panel Only 6 1/2 x 11 SD6 E/A382 W/Empty 32 oz. Spill Spout and Eye Cup 14 x 17 SD7 E/A3830 Panel Only 14 x 17 Double Stations SN702 E/A3841 W/2-32 oz. Squeeze Bottles 11 x 14 SR372 E/A3838 Panel Only 11 x 14 SR373* E/A3826 W/2 Empty 32 oz. Spill Spout and Eye Cup 14 x 17 SR374* E/A3831 Panel Only 14 x 17 Replacements SAK727 E/A3836 Empty 16 oz. Spill Spout and Eye Cup Bottle - YA094 E/A383 Empty 32 oz. Spill Spout and Eye Cup Bottle - SAK728 E/107AISO 16 oz. Eyewash Solution - SN703 E/107BISO 32 oz. Eyewash Solution - SR37 E/107CISO 4 litres Eyewash Solution - * Without mirror 23421E SN702 SR373 49
Pure Flow 1000 Sure-grip handle provides instant, simple activation Activation straps display expiration date Integral drain valve allows easy draining of reservoir after use Integral fluid reservoir captures waste fluid, eliminating potential safety hazards and simplifying fluid disposal Once activated, this device automatically displays a prominent Warning Service Immediately notice on the front of the unit; new fluid cartridges must be installed Requires two 3.8 gal. Eyesaline fluid cartridges (sold separately) Fluid cartridges have a 24-month shelf life Device must be mounted on a wall or other suitable vertical surface Comes complete with product registration card, operating manual, metal hanging bracket for installation and an emergency eyewash sign SEI certified to meet ANSI Z38.1 standard SD2 SAJ678 SD3 SD2 32-001000-0000 Eyewash Station (English Instructions) 32-001000-0022 Eyewash Station (French Instructions) 32-00100-0000 Fluid Cartridges (2/pkg) Porta-Stream Eyewash Waste Water Disposal Cart Portable, self-contained eyewash station provides flexible, emergency eyewash capability in economical systems. Lightweight, portable unit do not require plumbing. This heavy-duty, polyethylene, wheeled disposal cart provides a convenient way to transport waste solution to the nearest disposal site. The cart may also be used to catch fluid when testing plumbed emergency eyewash and showers that do not have drains. Disposal cart can hold up to 20 gallons of fluid, and has a 3.94" dia meter hole. SE137 32-00011-0000 SD3 40 40 70 Water Preservative A liquid formulated to inhibit the growth of harmful bacteria in self-contained eyewash stations One bottle will preserve 14 to 16 gallons of water in a unit such as the Porta-Stream II Case of four 8-oz. bottles with tamper evident seals Thirty-month shelf life, unopened Sold per case SAJ670 SAJ677 32-001100-0000 32-001100-0022 English Instructions French Instructions Portable Gravity Eyewash Fountain Features a 9-gallon capacity, FDA high-density green polyethylene tank Provides a full 1 minutes of full pattern flushing at 0.4 GPM Fold-down eyewash arm covers and protects the spray outlets when not in use Handle on top to allow for easy handling Wide-fill opening with threaded cap for easy inspection, cleaning and filling Bacteriostatic additive permits storage of water additive for up to 6 months Dimensions: 22" W x 10" D x 12" H Includes: Wall bracket Certified by CSA to meet the ANZI Z38.1 Standard SAR314 SAR31 0 2210_049_07_Eng.indd 0 701 9082 Portable Gravity Eyewash Fountain Water Additive, 8 oz., 4/case 23422E 11/28/08 1:40:08 PM
On-Site Gravity-Fed Eyewash Ideal for locations where a plumbed water source is not available Transparent tank allows solution level to be checked easily Hinged eyewash tray activates in one quick motion Stainless steel clamps secure the tank during transport Vandal-resistant unit: foreign objects cannot be introduced into tank because all openings are sealed once the tank is installed High-visibility yellow, moulded pedestal and tank Seven-gallon tank is one of the lightest portable eyewashes on the market Complies with ANSI Z38.1-2004 standard Includes wall bracket (can also deck mount) Includes water preservative kit: replacement cap, three liners, one 8-oz. bottle of preservative and inspection tag On-Site waste cart High-visibility yellow Captures used fluid, 6-gallon capacity Tapered sump, easy to drain On-Site heater jacket Protects against freezing: down to -20ºF (-29ºC) Insulated heater jacket conceals a 121-watt heater Secondary thermostat prevents overheating if primary thermostat fails Requires 120-volt AC line All UL-listed components SAK609 S19-921 Gravity-Fed Eyewash 23 SAK610 S19-921H Gravity-Fed Eyewash 2 w/heater Jacket SAK611 S19-399 Waste Cart 28 SAK612 S19-899 Waste Preservative Kit 2 SAK613 S19-86 Water Preservative, 3 four 8-oz. bottles, sold per case SAK609 SAK611 Water Preservative Universal application can be used with any portable eyewash unit, from 6 to 20 gallons Mixes with potable water Prevents bacteria, fungi and algae growth for up to 4 months Case of four 8 oz. bottles Sold per case SAK613 S19-86 On-Site Water Preservative Kit Replacement cap 3 liners One 8-oz. bottle of preservative Inspection tag SAK612 S19-899 10-Gallon Portable/PressuriSed Eyewash Stainless steel pressure tanks include tire filler valve with 0-100 PSI air gauge, pressure relief valve to prevent over pressurisation and built-in carry handles for easy transportation Eyewash assembly includes twin eyewash heads with a flow control and pop-off dust covers Eyewash activated by a large stainless steel push handle with stay-open ball valve 8' drench hose with hand-held squeeze valve 10-gallon unit: - Eyewash flow: Minimum 1-minute water flow - Drench hose flow: 3 1/2-minute water flow 1-gallon unit: - Eyewash flow: Minimum 22-minute water flow - Drench hose flow: -minute water flow Heated units: - 10 watt heater - Maintain average water temperature at 7 F (24 C) - Secondary thermostat prevents overheating - UL-listed components - Plug into 120-volt AC line, GFCI recommended Optional 4-wheel, stainless steel cart Meets ANSI Z38.1 standard SEI Certified SAK628 SAK631 SAK632 SAK628 S19-690 10 Gallons 30 SAK629* S19-690H 10 Gallons w/heater Jacket 31 SAK630 S19-788 1 Gallons 3 SAK631* S19-788H 1 Gallons w/heater Jacket 36 SAK632 S19-690A Transport Cart 12 SAK613 S19-86 Water Preservative (4-8 oz), sold per case 3 * Eyewash only, no drench hose 23423E 1
Faucet-Mount Eyewash Swing-Activated Eyewashes Mounts to standard or gooseneck type faucets Twin spray heads include a flow control and pop-off dust covers One-step activation Activates by an actuator pin on adapter when pin is in closed position, faucet can be used for normal operation Includes a safety sign and inspection tag Meets ANSI Z38.1 standard SEI Certified SAK621 S19-200B Swing-activated eye and eye/face washes mount to a counter or a wall SAK622 Swing-over unit mounts to a counter only 90 swivel activates eyewash over sink to begin flow of water to cleanse eyes Eyewash stows neatly to side of sink when not in use to save space Twin spray heads include a flow control and pop-off dust covers Include a safety sign and inspection tag Meets ANSI Z38.1 standard SEI Certified Faucet Eyewash Stations Chrome-plated brass faucet-mounted eyewash converts any faucet into an emergency eyewash station No special plumbing required, won't interfere with normal faucet operation Easy to operate, turn on water and pull out knob to activate eyewash Water pressure holds spring loaded valve open, leaving hands free SA423 Push in knob to turn off water to revert faucet to normal operation No tools required, complete with adapters Available for eyewash or eye/face wash SA422 SA422 SA423 SR376* SE620* * Sold per OK-1 Eyewash Station OK-2 Eye/Face Wash Station Replacement Dust Caps for SA422 Replacement Dust Caps for SA423 each Barrier Free Cabinet Concealed Swing-Down Eyewash 0.0 0.7 - Saves space and fits easily into any work environment Activated with opening of stainless steel door Waste water collected back into the cabinet's internal drain Chrome-plated brass pipe and fittings Designed to mount between 2" x 4" wall studs 16" on centres Universal identification sign and inspection tag included Meets ANSI Z38.1 Standards SEI Certified SAR316 S19-282 2 2210_049_07_Eng.indd 2 Eyewashes SAK622 S19-270C Counter-Mounted, Swing Over SAK623 S19-270HD Counter-Mounted, Swing Down SAK624 S19-270HW Wall-Mounted, Swing Down Eye/Face Washes SAK62 S19-270E SAK626 S19-270JD SAK627 S19-270JW Counter-Mounted, Swing Over Counter-Mounted, Swing Down Wall-Mounted, Swing Down Barrier-Free Wall-Mounted Eye/Face Wash Fixture Barrier-free accessibility Design saves space and fits easily into any work environment Stainless steel eyewash 10" dia. bowl and wraparound skirt Operates quickly by a stainless steel push handle Safe, steady water flow under varying water supply conditions from 30-90 PSI assured by integral flow control in the chrome-plated brass spray head assembly Chrome-plated brass 1/2" IPS stay-open ball valve 2" Chrome-plated brass pipe and fittings, 1/2" IPS water supply, 1 1/4" waste drain fitting Universal identification sign and inspection tag included Meets ANSI Z38.1 Standards SEI Certified SAR317 S19-220BF 23427E 11/28/08 1:40:46 PM
PEdestal-Mount Eye & Eye/Face Washes Includes 10" diameter impact-resistant yellow plastic bowl or corrosion-resistant stainless steel bowl Units activate by a highly visible plastic push handle and 1/2" IPS chrome-plated brass stay-open ball valve Twin spray heads include a flow control and pop-off dust covers Galvanized steel pipe is 1 1/4" and protected with Bradtec TM safety yellow polyurethane coating to help protect from corrosion Include safety sign and inspection tag Meets ANSI Z38.1 standard SEI Certified SAK620 Laboratory Eye/Face Wash Station Heavy gauge corrosion-resistant stainless 12 7/8" diameter bowl Bowl flush mounts Deck/counter mount Activated by push-down handle 1/2" IPS chrome plated stay open ball valve Twin spray heads with integral flow control Chrome-plated brass pipe, 1/2" water supply, 1 1/4" waste drain Replacement cap sold per each, two required per eye/face wash Weight: 12 SA439 S19-260 Replacement Dust Cap Sold per each SR377 S3-063 23428E SA437 Eyewash SA436 S19-210 Yellow Plastic Bowl 1 SAK618 S19-210B Stainless Steel Bowl 16 Eye/Face Wash SAK619 S19-210FW Yellow Plastic Bowl 17 SA437 S19-210Y Stainless Steel Bowl 20 Accessories SAJ118* 107-371 Eyewash, replacement dust cap SR377* S3-063 Eye/Face Wash, replacement dust cap SAK620 S4-1964 Retrofit dust cover * Sold per each SA436 SA436 Opti-Klens Aerated Eyewash Station Delivers a direct spray of gentle aerated water to the eyes in the event of a chemical, acid or caustic splash to the face Push paddle for easy activation Ball valve remains open until closed manually 10" stainless steel bowl 1/2" IPS and 1 1/4" IPS drain Softened flow heads with dust covers Wall mount Weight: 4 SA402 Mfg 1M Replacement dust caps w/chain SR381 Wall mounted Eyewash Unit Eye and eye/face washes include 10" diameter impact-resistant yellow plastic bowl or corrosion-resistant stainless bowl with or without hinged stainless steel cover Exposed pipes and wall bracket are protected with Bradtec TM safety yellow polyurethane coating to protect unit from corrosion Activates by a highly visible plastic push handle and 1/2" IPS chrome-plated brass stay-open ball valve Twin spray heads include a flow control and pop-off dust caps (models with no dust cover only) Includes safety sign and inspection tag Hinged stainless steel dust cover keeps dirt and other contaminates out of the eyewash bowl when not in use Dust cover pops open when highly visible stainless steel push handle is activated Replacement dust cap, two required per eye and eye/face wash Heavy-gauge aluminum, wall-mount bracket Meets ANSI Z38.1 standard SEI Certified SA438 SAK616 Eyewash SAK614 S19-220 Yellow Plastic Bowl 6 SAK61 S19-220B Stainless Steel Bowl 7 SA438 S19-220DC Stainless Steel Bowl w/cover 9 Eye/Face Wash SC471 S19-220FW Yellow Plastic Bowl 7 SAK616 S19-220T Stainless Steel Bowl 7 SAK617 S19-220DCFW Stainless Steel Bowl w/cover 10 Replacement Dust Cap SAJ118* 107-371 Eyewash, priced per each - SR377* S3-063 Eye/Face Wash, priced per each - * Sold per each Eyewash Test Gauge Makes sure eyewash achieves a compliant pattern per ANSI Z38.1-2004 SAQ294 269-1444 3
Combination Showers & Eye, Eye/Face Washes Showers available in yellow impact-resistant plastic or corrosion-resistant stainless steel 10" diameter showerheads activated by a stainless steel pull rod and 1" IPS chrome-plated stay-open ball valve Include twin spray heads with a flow control and pop-off dust caps with either yellow impact-resistant plastic or corrosion-resistant stainless steel 10" diameter bowls Activated by highly visible push handle and 1/2" IPS chrome-plated stay-open ball valve Some units can be hand or foot control operated All units except SAK639 and SAR318 include 1 1/4" BradtectTM coated galvanized pipe and floor flange which is a yellow polyurethane coating that withstands harsh/corrosive environments SAK633 includes drench hose attachment for face and body rinse Water supply: 1 1/4" IPS (female). Waste: 1 1/4" IPS (female) Includes safety sign and inspection tag Meets ANSI Z38.1 Standards SAK639 SEI Certified Eyewash SAK638 SA41 S19-310 Plastic Showerhead and Bowl 41 SAK633 S19-310P Plastic Showerhead and Bowl w/drench Hose 47 SAK634* S19-310LL Plastic Showerhead and Stainless Steel Bowl 42 SAK63* S19-310UU Stainless Steel Showerhead and Bowl 44 SAR318 S19-310JJ Stainless Steel Combination eyewash 9 Eye/Face Wash S19-310FW Plastic Showerhead and Bowl 41 SAK636 SAK638** S19-310PVC Plastic Showerhead and Bowl 3 SAK620 SAK637* S19-310AC Plastic Showerhead and Stainless Steel Bowl 42 SAK639 S19-310SS Stainless Steel Combination Eye/Face Wash 0 Accessories SAJ118 107-371 Eyewash, Replacement Dust Caps (sold per each) SR377 S3-063 Eye/Face Wash, Replacement Dust Caps (sold per each) SAK620 S4-1964 Retrofit Dust Cover SAK646 S19-430EH Handheld Drench Hose Kit * Hand or Foot Operated ** 2" schedule 80 PVC pipe and floor flange withstands highly corrosive environments including chlorine Frost Proof Wall Mounted Drench Shower & Eyewash Specifically made for areas subject to freezing Drench shower exceeds minimum water flow of 20 GPM Eyewash exceeds minimum water flow of 0.4 GPM at 30 PSI Galvanised steel protected with BradtectTM safety yellow coating Universal identification sign and inspection tag included Complies with ANSI Standard Z38.1-2004 SAR319 S19-310TW SAK646 Horizontal & Vertical Supply Drench Showers Designed for wall (horizontal) or ceiling (vertical) mounting Showers include either 10" diameter impact-resistant plastic (high-visibility yellow) or corrosion-resistant stainless steel showerheads Activated with stainless steel pull rod and 1" IPS chrome-plated brass stay-open ball valve Pipe is 1" BradtecTM coated galvanized steel which is a yellow polyurethane coating to prevent corrosion Water supply: 1" IPS (female) SA414 Includes safety sign and inspection tag Meet ANSI Z38.1 standard SEI Certified Horizontal Supply SA414 S19-120 Plastic Showerhead SAK644 S19-120A Stainless Steel Showerhead Vertical Supply SA416 S19-130 SAK64 S19-130A 4 2210_049_07_Eng.indd 4 SAK633 7 8 Plastic Showerhead Stainless Steel Showerhead 6 23423E 11/28/08 1:41:36 PM
Barrier Free Recess-Mounted Drench Shower Designed to accommodate areas where space considerations are a concern Push-down handle for quick and easy activation Exceeds minimum water flow of 20 GPM at 30 PSI Universal identification sign and inspection tag included Complies with ANSI Standard Z38.1-2004 SAR321 S19-12BF Flush Mounted with Horizontal Supply Integral flange mounts flush with ceiling Concealed pipe and fittings Exceed minimum water flow of 20 GPM at 30 PSI Universal identification sign and inspection tag included Complies with ANSI Standard Z38.1-2004 SAR320 S19-120FM Drench Shower Tester Heavy-duty tester provides a convenient way to comply with ANSI specifications for weekly testing on all drench showers - without getting wet 84" long, watertight funnel with weighted bottom directs water to a drain or bucket 8' telescoping aluminum handle Testing record card included SC338 S19-330ST De-Fend Emergency Decontamination Shower Designed to provide decontamination facilities in accordance with OSHA standards without distracting emergency responders from their primary task Ideal for a variety of locations, including construction sites, loading docks, agricultural locations, and other emergency response areas Flushes contaminants from the worker s protective clothing while the retention pool collects the rinse water; may then be disposed of properly Lightweight, compact design Quick deployment in less than two minutes Copious water drenching with a five-gallon per minute flow rate at 40 PSI water supply pressure Large rinsing area to accommodate emergency responder in full chemical gear with SCBA Large collection capacity of over 120 gallons, up to 30 minutes of shower use Connects to standard garden hose Optional drench hose Meets ANSI Z38.1 standards SA429 32-001180-0000 Shower 17 SAK723 32-001187-0000 Shower w/bag 19 SA430 32-001181-0000 Shower Bag 3 SA431 32-001182-0000 Pool 19 SAK724 32-001188-0000 Pool w/bag 21 SA432 32-001183-0000 Pool Bag 3 23424E
Wall-Mounted Hand-Held Drench Hoses Hand-Held Drench Hose Spray Kits SA440 SA441 SAK646 SAK647 Quick-access emergency eye and face spray features soft flow spray head for flooding large areas as well as eyes only Self-coiling highly visible yellow-coloured hose retracts for easy storage while allowing instant extension in emergency situation Water flows when handle on chrome-plated brass assembly is squeezed Wall bracket and protective spray head cover included Universal identification sign and inspection tag included Meets ANSI Z38.1 standard SEI certified S19-600 12' Hose S19-610 2' Hose 7 12 Privacy Curtain Double-laminated, chemical-resistant Tyvek Durable construction with top and bottom reinforcements Highly visible yellow colour Stainless steel curtain rail and mounting brackets included Dimensions: 70" L x 14" W SAQ29 S19-330 Laboratory spray valve easily attaches to any Bradley drench hose or eyewash fixture Includes all necessary fittings and hanger for attaching hose to the units 8' highly visible yellow reinforced thermoplastic hose Handle stays open once it is squeezed Integral flow control assures safe, steady flow under varying water supply conditions Meets ANSI Z38.1 standard SEI certified S19-430EH For Eyewash Units S19-430SH For Drench Showers 4 Flow Switch Alarm System Automatic, audible and visual system with 6' cord Designed to meet NEMA 3 code (waterproof) Strobe light and flow switch are UL Listed and CSA approved Alarm horn is adjustable from 78-103 decibels and is UL listed Includes: Remote wiring contacts Eyewash not included SAR322 SAR323 S19-320 Connects to 1 1/4" Inlet Piping S19-320A Connects to 1/2" Inlet Piping Walk Through Stainless Steel Boot SanitiSer Provides a clean surface upon entry and exit Open grid design provides a safe, skid-resistant surface Reduces bacteria and prevents cross contamination Adjustable injector valve automatically mixes sanitizer with water Debris is quickly rinsed away through a sturdy grate system Optional boot sanitizer tray to collect used water when it cannot be place over a floor drain Simple mechanical valve activates a spray of sanitiser solution Ideal for the food industry SAR32 SAR326 S93-068 S93-26 6 2210_049_07_Eng.indd 6 Boot Sanitiser Boot Sanitiser Tray 2342E 11/28/08 1:42:06 PM
Emergency Shower Station Mat 46 Use under emergency showers or eyewash stations to draw attention to the emergency equipment and to keep accident victims from slipping. 7/8" thick with drainage ports throughout, keeps employees safely above the overflow area as the hazardous chemicals are washed off High-traction design on the mats surface also provides safe footing Following the ANSI Z3.1-1998 standard for colour-coding, the mat effectively calls attention to the safety shower or eyewash areas Highly visible tiles designate the location of first aid and safety equipment, and the yellow borders denote caution Borders are 6" wide and have a gradual slope for easy access Red is for use under emergency showers Green is for use under eyewash stations 1-YEAR WARRANTY Dim. L" x W" Colours SAN33 36 x 30 Green SAN336 48 x 30 Green SAO082 36 x 30 Red SAO083 48 x 30 Red SAN33 SAO082 Thermostatic mixing valves Emergency eyewash and shower mixing valves blend hot and cold water to a comfortable flushing temperature. ANSI standards require tepid water to assure that eyewash and shower users are not subjected to scalding or freezing water temperatures. Model SAI289 8 gallons per minute; accommodates up to three eyewashes or one eye/face wash Features: Reliable liquid filled thermostat with a 10-year manufacturer's warranty Check stops on inlets Adjustable set point within temperature range Model SAI294 36 gallons per minute; accommodates one combination shower with eyewash or multiple eyewashes Accurate temperature control to within ±3 F Built-in cold water bypass, assuring cold flow Easy installation and serviceability Positive shut-off of hot supply when cold supply is lost Model SAI299 67 gallons per minute; accommodates up to two combination showers with eyewashes or multiple eyewashes Dirt and lime resistant Dial thermometer Factory assembled and tested Universal mounting capability Rough bronze finish Meets ANSI Z38.1 standard Flow Capacities GPM Min. System Pressure Drop - PSI Flow 10 1 20 30 4 60 SAI289 1. 3.4 4..6 6. 7.8 9.4 11.6 Cold Bypass Only 2.6 3.2 4.0 4.6.6 6.8 7.7 SAI294 2.0 14.0 20.0 24. 29.0 36.0 44.0 0.0 Cold Bypass Only 8.0 11. 14.0 16. 20.0 24. 28.0 SAI299 2.0 23.0 36.0 46.0 4.0 67.0 83.0 9.0 Cold Bypass Only 1.0 22.0 29.0 34.0 43.0 2.0 60.0 Thermostatic mixing valves SAI289 S19-2000 8 GPM @ 30 PSI SAI294 S19-2100 36 GPM @ 30 PSI SAI299 S19-2200 67 GPM @ 30 PSI Specifications: Emergency fixture water mixing valve shall consist of liquid-filled thermal motor and piston control mechanism with positive shut-off of hot water when cold water supply is lost to prevent scalding Valve allows cold flow in the event of loss or interruption of the hot water supply or thermostat failure Valve controls outlet temperature Temperature adjustment are vandal resistant Valve SpecificationS: Maximum operating pressure: 12 PSI (860 kpa) Maximum inlet temperature: 180 F (82 C) Recommended inlet temperature: 120 F (49 C) to 140 F (60 C) Temperature range: Std. 6 F (18 C) to 9 F (3 C) Set Point: 8 F (29 C) 23426E 7