PUMPS 2 S MUST/LIQUID PUMPS LIQUID PUMPS
S DELLA TOFFOLA PERISTALTIC OPEN THROAT USE: Peristaltic pump suitable for transferring whole or crushed grapes by continuous gentle compression of a silicon bladder. PPC100/TPPC100 1-7.5 t/hr PPC200/TPPC200 2-15 t/hr PPC300/TPPC300 3-22.5 t/hr PPC600/TPPC600 6-45 t/hr 100 9-11 t/hr 200 15-18 t/hr 300 20-25 t/hr All contact parts are made from stainless steel or food grade silicon Self priming All material transferred does not have contact with mechanical parts Flow reverse available Pump can be run dry without any adverse affects Electronic inverter allows continuous regulation of flow rate Rollers compressing the hose pipe create a vacuum which generates a continual flow of product Hopper with screw feeder and agitator to feed peristaltic pump Stainless steel compensation chamber and pressure switch DELLA TOFFOLA ELLIPTICAL OPEN THROAT USE: Suitable for transferring whole or crushed grapes by single elliptical lobe. Ideal for the gentle transfer and handling of dry or viscous products. Fully stainless steel body Highly resistant thermoplastic elliptical rotor Extra deep collection hopper Rotating single lobe Anti-vibration device for firm stability while running Low rotor revolutions Splash proof controls Optional: Compensation buffer reducing mechanical stress PUMPS 400 23-28 t/hr CEP 'VOLUMEX' OPEN THROAT USE: Suitable for transferring whole or crushed grapes by single elliptical lobe. Ideal for gentle transfer and handling of dry or viscous products. Available in 5-7, 9-11, 14-17 & 25-30 tonne per hour Fully stainless steel body Rotating single lobe Low rotor revolutions Splash proof controls Optional: Compensation buffer reduces mechanical stress 5
MUST/LIQUID PUMPS DELLA TOFFOLA 'KIESEL' HELLICAL OPEN THROAT USE: Hellical rotor positive displacement pump used for the transfer of crushed grapes. The gentle action at very low speeds minimizes aeration and fruit maceration during transfer and handling. This unit is not designed for dry products such as whole berries or whole bunches PUMPS Fully stainless steel body with rubber stator Stainless steel hollow rotor CO 2 gas inlet in hopper Wheel mounted unit for ease of movement around the winery Available in three phase only Optional: Fluid level indicator with auto cut out to prevent the dry running of the pump DELLA TOFFOLA PERISTALTIC MUST/LIQUID PUMP USE: Peristaltic pump suitable for transferring juice, must and wine by continuous gentle compression of the silicon bladder. Small sizes PPC25 and PPC50 suitable for liquid transfer only All contact parts are made from stainless steel and food grade silicon Self priming All material transferred has no contact with mechanical parts Flow reverse available Pump can be run dry without any adverse affects Electronic inverter allows continuous regulation of flow rate Rollers compressing the hose pipe create a vacuum which generates a continual flow of product Includes stainless steel compensation chamber and pressure switch SPF12FTF 12 t/hr SPF16FTF 16 t/hr SPF20FTF 20 t/hr SPF24FTF 24 t/hr SPF30FTF 30 t/hr PPC25 500-2,500 L/hr PPC50 1,000-5,000 L/hr TECNICAPOMPE TECHNICAPOMPE TCD MUST/LIQUID PUMP USE: Centrifugal screw shaped impellor specifically designed for re-circulation of must, juice or wine with low macerating action. Models include TCD 15, 20, 40 & 55 All internal contact parts fully stainless steel The design of the stainless steel screw shaped impellor reduces the damage to solid particles such as skins and seeds Designed to self lubricate internal mechanical seal during operation Optional: Stainless steel trolley Optional: Remounting model for fixed application to tanks Optional: Stainless steel motor cover Optional: Electronic sensor avoid dry running of the pump Optional: Adjustable legs PPC100 PPC200 PPC300 PPC600 2,000-10,000 L/hr 4,000-20,000 L/hr 6,000-30,000 L/hr 12,000-60,000 L/hr 6
MUST/LIQUID PUMPS LIVERANI MUST/LIQUID PUMP USE: Flexible impellor pump used for the transfer and re-circulation of must, juice or wine Models available in single speed, mechanical or electronic variable speed. MODEL INLET/ OUTLET OUTPUT GR Minor 40mm 60 L/min GR Minor with electronic variable speed 40mm 20-100 L/min VA Minor with mechanical variable speed 40mm 20-100 L/min GR Major 50mm or 63mm 200 L/min GR Major with electronic variable speed 50mm or 63mm 72-375 L/min VA Major with mechanical variable speed 50mm or 63mm 72-375 L/min GR Maxi 76mm 600 L/min GR Maxi with electronic variable speed 76mm 250-830 L/min VA Maxi with mechanical variable speed 76mm 250-830 L/min Stainless steel trolley and pump casing Silicon impeller with indent design allowing liquid to circulate around each end of the impeller. This action aids lubrication and cooling, reducing wear and overheating of the impellor Drive shaft moulded in one piece with the impellor reducing the possibility of impellor wear which can occur in other models Self priming with forward and reverse Easy access to the impellor by simply removing the front cover plate aids easy cleaning Single and three phase units available Optional: By pass valve Optional: Automatic dry stop cut out Optional: Impellors manufactured from a range of materials to suit the transfer of products other than wine PUMPS TECNICAPOMPE TECHNICAPOMPE TC LIQUID PUMP USE: Centrifugal stainless steel impellor pump for liquid transfer. Particularly suitable for bottling, filtration and CIP (Clean in Place) operations. Available in 10,000 to 70,000 litre capacities Capable of handling pressures 1-5.5 bar Tolerates liquids up to 120 o C, ideal for caustic or hot water cleaning washes Optional: Stainless steel trolley 7
LIQUID PUMPS DELLA TOFFOLA 'KIESEL' LIQUID TRANSFER PUMP PUMPS 8 USE: Hellical rotor positive displacement pump used for the transfer of juice or wine, also used for must transfer. This pump is particularly suitable for filling and filtration applications. This unit is not designed for dry products such as whole berries or whole bunches SP3 1,100 L/hr SP4 1,250-2,500 L/hr SP45 2,500-5,000 L/hr SP5 5,000-10,000 L/hr SP6 10,000-20,000 L/hr SP10 15,000-30,000 L/hr SP12 20,000-40,000 L/hr SP16 25,000-50,000 L/hr Stainless steel unit with rubber stator and stainless steel hollow rotor Smooth, pulsation free transfer of liquid Compact unit easily moved from one application to the next Two speed settings (not available on models that have been modified for variable speed) Easy cleaning Optional: Automatic cut out Optional: By pass valve on all models except the SP3, not available with SP3 model MONO CP RANGE - SMALL LIQUID TRANSFER PUMP USE: Hellical rotor positive displacement pump used for the transfer of juice or wine This unit is not designed to handle any solid materials and should be used for liquid transfer only All output ratings are provided at 5 metres head MODEL INLET/ OUTLET OUTPUT CP11 25mm Female BSP 715 L/hr CP25 25mm Female BSP 1620 L/hr CP800 38mm Male BSP 3960 L/hr CP1600 38mm Male BSP 7600 L/hr Single helix rotor eccentrically positioned within a double helix stator Tough acetyl co-polymer plastic housing Stainless steel internal rotating parts Pulsation free operation a result of the uniform flow rate Low rotor revolutions facilitates gentle liquid transfer Single mechanical seal Self Priming up to 6m BSP thread inlet and outlet All models available in single and three phase Simple and easy to clean and maintain Optional: Bypass making the unit suitable for filling and filtration Optional: Electrical variable speed Optional: Stainless steel trolley, galvinised or enamel