Cafim RFID Electronic lock
The electronic cabinet lock for: Glass cabinets and display cases in exclusive retail areas Hospitals with lockers for private belongings of patients Clubs and associations Personal households with secure private areas and child safety requirements Shops, hospitals, schools, clubs, gyms, swimming-pools, spas Overview of features Simple to program without PC and without software Reliable functioning through untill 25 mm of wood or other non-metallic material without visible external antenna Minimum 30,000 latch openings per battery Programmable with up to 50 different keys Can be coupled with existing RFID systems Very robust, impact-proof motor function Opens readily even against pressure Alarm sounds when battery is nearing the end of its lifecycle Opens one last time automatically with final battery voltage Simple to install and therefore also suitable for subsequent installation Flexible, project-based programming and functions available Standard locking device Two-dimensionally adjustable Optimal readjustment possible Spring-mounted locking bolt Rated breaking point at approx. 25 kg Standard latch function This lock automatically snaps shut after a 3 second interval. Copies of key cards and chip keys We can make copies of all keys. One key is read in to all locks and all other keys immediately have access (simultaneous locking). Back-up copies of keys can also be deposited.
Programming Instructions Reading in of programming card 1. Press the push-button on the back [1] 2. The lock will make a ticking sound (signal). Place the programming card in contact with the lock within 3 seconds of hearing this signal. 3. Two short rising tone signals confirm that the programming card has been saved successfully. Reading in of key card or chip key 1. Please place the programming card in contact with the lock. 2. The lock will make a ticking sound (signal). Place the key card or chip key in contact with the lock within 3 seconds of hearing this signal. 3. Two short rising tone signals confirm that the reading in was successful. 4. The lock can now be opened with the key card or the chip card. Cancelling the key card or chip key 1. Please place the programming card in contact with the lock. 2. The lock will make a ticking sound (signal). Place the key card or chip key in contact with the lock within 3 seconds of hearing this signal. 3. four short rising tone signals confirm that the cancellation was successful. Delete all keys To delete all keys at once, please place the programming card for more than 11 seconds in contact with the back of the lock: during this time the lock will make a ticking sound, and after that a long tone signals will inform that you have cancelled all the keys. Front Back Chip/key progr. card 1 4 10 40 +/- 5 60 48 60 32 51 30 48 60 22 4
Installation and minimum Distance If you use the lock in a battery mode, please take care that the minimum distances are correct. Please keep these distances to avoid a fast discharge of the battery and a low range of the antenna.
List of articles Electronic Cabinet Lock with double entrance The minimum distance between 2 locks should be 10cm 3060D Standard model ( up to 50 keys per lock MOQ: 20 3060L On request ( up to 3 keys per lock ) Plastic locking device with rated breaking point 3065 MOQ: 20 ZAMAK locking device with or without rated breaking point and spring to push up a cabinet door. The slots enabled an forward adjustment. An included magnet enables the alarm functions 3069 MOQ: 20 Steel locking device without rated breaking point (no warranty for damage incurred by opening lock forcibly) 3067 MOQ: 20 Frontal locking device black with rated breaking point and magnets for the option of alarm functions. 3068P model in plastic MOQ: 20 3068Z model in zamak MOQ: 20 Lithium Battery 3 Volt 3050 MOQ: 20 ConChip Chip Key (Range max. 20 mm; with round external antenna max. 15mm 3020 Standard MOQ: 20 ConChip Key Card (Range max. 30 mm) 3030 Standard MOQ: 20 3031 Color printed MOQ: 100
List of articles Programming card 3010 Standard MOQ: 20 3011 Color printed MOQ: 100 ConChip High Range Card (up to 40 mm distance ) You can use this card as a key as well as a programming card. 3033 MOQ: 20 ConChip Chip Key with rubbery wristband 3034 red wristband MOQ: 20 3035 blue wristband MOQ: 20 Flat external antenna with 1.5 m connecting cable 3041 Plug for the panel 3053 MOQ: 20 3045 Plug for the lock MOQ: 20 Mini-rod external antenna with 1.5 m connecting cable. diameter mm 12 length mm 40 3043 Plug for the panel 3053 MOQ: 20 3044 Plug for the lock MOQ: 20 Converter 3.0V DC with connecting cable 1.5 m and plug for connecting panel. 3051 MOQ: 20 Extension cable with extra junction for an additional lock. Length 1.5 m 3052 MOQ: 20
List of articles Connecting panel with cable, two sockets, for external antenna and external electricity supply. 3053 MOQ: 20 Glass assembly set to assemble the lock on glass. Contains 1 panel for the lock, 1 panel for the standard locking device, black foil, screws and 2 adhesive surfaces. 3054 MOQ: 20 Software Update for the lock Software update Lock Delay The lock only shuts automatically after a time delay. 3080 with 7 second delay Software update Sound Off The opening, closing and programming signal is turned off. 3085 Software update Alarm 'Door open' After the delay, an alarm signal is sounded to bring to attention that the lock is still open. This is only possible with locking device 3068. 3087 with 20 seconds Software update Break In Alarm If the lock is opened without a key, an alarm signal is sounded. This is only possible with locking device 3068. 3090
List of articles Software update Bolting Function / Office function The lock only shuts when the key has been read in a second time. 3091 Software update Group Function All connected locks can be open and close together. 3093