The PASTING DEVICE (optional) is specifically designed to obtain higher spine book solidity. The application of the glue strip is set to be applied on the second and on the last signature of the book but it can also be programmed to be applied on any combination of signatures or on each signature of the book. FRECCIA The sewer can be equipped with the GAUZE DEVICE (optional) to reinforce the book spine during the sewing operation. The gauze device applies the gauze material on the spine of the book block automatically, sewing it together with the book signatures. TECHNICAL FEATURES F145 F145XL Signature size Max. 320 x 390 mm. 320 X 420 mm Min. 80 x 150 mm 80 X 150 mm Max. mechanical speed 145 rpm 145 rpm Openings 4 upper + 4 lower 4 upper + 4 lower Stitches number 8 8 Length stitch 24 mm 24 mm Max. air consumption *The air (externally supplied) must be dry to optimize the 200 N/l min. - 6 bar* correct functions of the machine. 200 N/l min. - 6 bar* Electrical 400 V. 3Phases - 50 Hz. 400 V. 3Phases - 50 Hz. Rated power 4 Kw 4 Kw Total weight 2500 kg. 2500 kg. Dimension 2,67 x 1,7 x H 1,7 mt 2,67 x 1,7 x H 1,7 mt F145 automatic book sewer Smyth s.r.l. Regione Formica 10 S.S.31 Casale-Torino, 15030 Coniolo (AL) Italy tel.: 0142-56.33.66 fax: 0142-56.22.77 e-mail: freccia@smyth.it - web: www.smyth.it Rev.01 31 Ago 2016
FRECCIA Made Made in Italy in Italy by SMYTH by SMYTH SRL SRL F145 AUTOMATIC BOOK SEWING MACHINE FRECCIA F145 AUTOMATIC BOOK SEWING MACHINE Freccia F145 is an automatic sewing machine most appreciated by the graphic companies that want to be independent in the production of sewn books. This model can satisfy all the production requirements combining both easy use and low investment with a compact solid machine.. The operator interface comprises a Touch Screen centrally positioned to enable all machine functioning parameters to be checked from both sides of the machine. Automatic Feeder equipped with 4 upper suckers and 4 lower suckers activated by electronic programmer. The machine is supplied with a LAP opening device for 10 mm or more. Front guard with automatic opening, allowing easy access should the machine stop for any reason. Two big windows facilitate the supervision of the machine during production. The reforming system for the back of the signatures comprises a lower and upper wheel guaranteeing the complete opening of the signature back for perfect centering of sewing stitches. The mobile saddle is equipped with a precise signature locking system giving perfect positioning of the signature on the saddle and guaranteeing a perfect centering of sewing stitches. The very compact design enables easy loading of the signatures on the hopper of the feeder and unloading of the sewn books. Device for cutting and automatic separation of threads: combined with book extraction equipment one by one of books can be connected in line a stacker for stacking sewn books. (optional) GATHERING SEQUENCE CONTROL performed by OPTICAM which is located on the hopper of the book sewing machine feeder. The OPTICAM system guarantees a high level of control by filtering all possible problems and accurately avoids false alarms and unnecessary stops through the continuous measurements performed on each individual signatures as processed from the hopper of the feeder. (optional)
FRECCIA GATHERING SEQUENCE CONTROL performed by OPTICAM which is located on the hopper of the book sewing machine feeder. The OPTICAM system guarantees a high level of control by filtering all possible problems and accurately avoids false alarms and unnecessary stops through the continuous measurements performed on each individual signatures as processed from the hopper of the feeder. (optional) TECHNICAL FEATURES F150L Signature size Max. 340 x 560 mm. Min. 80 x 135 mm. Max. mechanical speed 150 rpm Openings 4 upper + 4 lower + LAP Stitches number 13 Length stitch 24 mm. Max. air consumption *The air (externally supplied) must be dry to optimize the correct 300 N/l min. - 6 bar* functions of the machine. Electrical 400 V. 3PHASES - 50 Hz. Rated power 7 Kw Total weight 3700 kg. Dimension 3,47 x 1,97 x h 1,7 m Smyth s.r.l. Regione Formica 10 S.S.31 Casale-Torino, 15030 Coniolo (AL) Italy tel.: 0142-56.33.66 fax: 0142-56.22.77 e-mail: freccia@smyth.it - web: www.smyth.it Rev. 31 Ago 2016 F150L 4D automatic book sewer
FRECCIA F150L AUTOMATIC BOOK SEWING MACHINE FRECCIA F150L AUTOMATIC BOOK SEWING MACHINE The proven reliability of FRECCIA F150L book sewing machine is the result of the experience gained by the Italian Company Smyth SRL throughout its long history of manufacturing. Unique design features allow the F150L book sewing machine to process all types of signatures. Utilizing all the newest technology helps make the FRECCIA machines simple to use and operator friendly. The maximum mechanical speed is 150 rpm. Fast set-ups and the exceptional versatility of the 4D feeder operations are just some of the features that make the F150L capable of fulfilling an unparalleled range of production requirements.. TOP SADDLE CONTROL A precise signatures locking system, on the top of the saddle, assure the perfect centering of the stitches on the signature back. VACUUM HEADING UP SYSTEM A mixed Vacuum and Pressure system to make easy pulled against register header inserted signature. In presence of signature not inserted, the vacuum system is switch off allowing the heading up system to work only with the pressure. PROGRAMMING The computer handles via servo motors the main size adjustments entered by the operator. New touch screen monitor is placed on a pivoting console for easy accessibility from either side of the machine. The following functions can be programmed: Programming of 4 upper and 4 lower openings Programming of LAP opening device Programming of speed variation of the main motor and kicker wheel Programming of the signature gluing device (optional) Programming of control of the gathering sequence (optional) Management of the automatic lubrication system Management of the electric motor control Diagnostic of the electro-mechanical functions Possibility of the diagnostic service via modem connection. NEW F150L 4D LOADING, FEEDING AND OPENING Signatures to be sewn are loaded in the hopper. A photocell gathering control (optional) monitors the correct sequence of gathered signatures and stops the machine in case of mistake. The signatures are transported through the opening section in a shingled stream by means of geared belts. This unique system reduces by 50% the travelling speed of the signature, compared to a conventional transport of a signature at a time. Contact time with the vacuum openers is longer and the special movement of the suckers-radial rotation- ensures a gentle and precise opening of the signature even in presence of porous paper, heavy perforation and static electricity. The LAP opening device - standard in the F150L - is ready to work when programmed and does not require any installation. On request, a second LAP opener can be installed which will make it possible to have two additional vacuum-openings after the LAP. For porous paper, Ventura-type openings are available. SEWN BOOK STACKER Freccia mod. EASYSTACK is the stacker that makes piles of sewn books coming from the sewing machine in order to facilitate the operator in the discharge operations. The separation of books is made by a "comb" system for normal thickness books and a suckers system for thin books. The books pile is programmable up to 120 mm height. (optional)
TECHNICAL FEATURES F180 Signature size Max. 320 x 420 mm. Min. 80 x 135 mm. Max. mechanical speed 180 rpm Openings 4 upper + 4 lower + LAP Stitches number 9 Length stitch 24 mm. Max. air consumption *The air (externally supplied) must be dry to optimize the correct 300 N/l min. - 6 bar* functions of the machine. Electrical 400 V. + neutral - 50 Hz. Rated power 7 Kw Total weight 3500 kg. Dimension 3,17 x 1,97 x h 1,65 m FRECCIA GATHERING SEQUENCE CONTROL performed by OPTICAM which is located on the hopper of the book sewing machine feeder. The OPTICAM system guarantees a high level of control by filtering all possible problems and accurately avoids false alarms and unnecessary stops through the continuous measurements performed on each individual signatures as processed from the hopper of the feeder. (optional) F180 4D automatic book sewer Smyth s.r.l. Regione Formica 10 S.S.31 Casale-Torino, 15030 Coniolo (AL) Italy tel.: 0142-56.33.66 fax: 0142-56.22.77 e-mail: freccia@smyth.it - web: www.smyth.it Rev. 31 Ago 201
FRECCIA F180 AUTOMATIC BOOK SEWING MACHINE FRECCIA F180 AUTOMATIC BOOK SEWING MACHINE The proven reliability of FRECCIA F180 book sewing machine is the result of the experience gained by the Italian Company Smyth SRL throughout its long history of manufacturing. Unique design features allow the F180 book sewing machine to process all types of signatures. Utilizing all the newest technology helps make the FRECCIA machines simple to use and operator friendly. The maximum mechanical speed is 180 cycles/min. Fast set-ups and the exceptional versatility of the 4D feeder operations are just some of the features that make the F180 capable of fulfilling an unparalleled range of production requirements.. TOP SADDLE CONTROL A precise signatures locking system, on the top of the saddle, assure the perfect centering of the stitches on the signature back. VACUUM HEADING UP SYSTEM A mixed Vacuum and Pressure system to make easy pulled against register header inserted signature. In presence of signature not inserted, the vacuum system is switch off allowing the heading up system to work only with the pressure. PROGRAMMING The computer handles via servo motors the main size adjustments entered by the operator. New touch screen monitor is placed on a pivoting console for easy accessibility from either side of the machine. The following functions can be programmed: Programming of 4 upper and 4 lower openings Programming of LAP opening device Programming of speed variation of the main motor and kicker wheel Programming of the signature gluing device (optional) Programming of control of the gathering sequence (optional) Management of the automatic lubrication system Management of the electric motor control Diagnostic of the electro-mechanical functions Possibility of the diagnostic service via modem connection. NEW F180 4D LOADING, FEEDING AND OPENING Signatures to be sewn are loaded in the hopper. A photocell gathering control (optional) monitors the correct sequence of gathered signatures and stops the machine in case of mistake. The signatures are transported through the opening section in a shingled stream by means of geared belts. This unique system reduces by 50% the travelling speed of the signature, compared to a conventional transport of a signature at a time. Contact time with the vacuum openers is longer and the special movement of the suckers-radial rotation- ensures a gentle and precise opening of the signature even in presence of porous paper, heavy perforation and static electricity. The LAP opening device - standard in the F180 - is ready to work when programmed and does not require any installation. On request, a second LAP opener can be installed which will make it possible to have two additional vacuum-openings after the LAP. For porous paper, Ventura-type openings are available. SEWN BOOK STACKER Freccia mod. EASYSTACK is the stacker that makes piles of sewn books coming from the sewing machine in order to facilitate the operator in the discharge operations. The separation of books is made by a "comb" system for normal thickness books and a suckers system for thin books. The books pile is programmable up to 120 mm height. (option).
The sewer can be equipped with the GAUZE DEVICE (optional) to reinforce the book spine during the sewing operation. The gauze device applies the gauze material on the spine of the book block automatically, sewing it together with the book signatures. TECHNICAL FEATURES AUTOMATIC SEMIAUTOMATIC Signature size Max. 440 x 615 mm 440 x 615 mm Min. 80 x 150 mm 75 X 100 mm Max. mechanical speed up 75 rpm up 75 rpm Openings 4 upper + 4 lower Not available Stitches number 14 14 Length stitch 24-32 mm 24-32 mm Max. air consumption *The air (externally supplied) must be dry to optimize the 200 N/l min. - 6 bar* correct functions of the machine. 200 N/l min. - 6 bar* Electrical 400 V. 3Phases - 50 Hz. 400 V. 3Phases - 50 Hz. Rated power 4 Kw 2,5 Kw Total weight 3400 kg. 2150 kg. Dimension 3,5 x 1,81 x H 1,7 mt 3,5 x 1,4 x H 1,7 mt FRECCIA The PASTING DEVICE (optional) is specifically designed to obtain higher spine book solidity. The application of the glue strip is set to be applied on the second and on the last signature of the book but it can also be programmed to be applied on any combination of signatures or on each signature of the book. Smyth s.r.l. Regione Formica 10 S.S. 31 Casale-Torino, 15030 Coniolo (AL) Italy Tel.: +39 (0)142-56.33.66 fax: +39 (0)142-56.22.77 e-mail: freccia@smyth.it - web site: www.smyth.it MAGNUM 75 special book sewer Rev. 01 Sett. 2016
FRECCIA MAGNUM 75 SPECIAL BOOK SEWING MACHINE Freccia MAGNUM 75 is a special book sewer able to sew exceptionally large signatures. It is particularly appreciated by graphic companies for the production of OVERSIZED high quality sewn books. The machine can be supplied in the AUTOMATIC or SEMIAUTOMATIC version (hand feeding). FRECCIA MAGNUM 75 SPECIAL BOOK SEWING MACHINE The mobile saddle is equipped with a precise signature locking system that allows the perfect positioning of the signature on the top of the saddle and guarantees the perfect centering of the sewing stitches. MAGNUM 75 AUTOMATIC Book Sewer Setting stitches positioning To obtain a precise stitches positioning on the signature spine, the sewer MAGNUM 75 gives the possibility to set the position and the stitch length. This technical solution gives the possibility to sew signatures, setting the stitches length of 24 or 32 mm. Reforming system for the signatures spine. This system consists of a lower and upper wheel; it guarantees the complete opening of the signature spine for the perfect sewing stitches centering. The operator interface comprises a Touch Screen centrally positioned to enable all machine functioning parameters to be checked from both sides of the machine. The Automatic Feeding sewer, is equipped with an automatic feeder complete of 4 upper + 4 lower openings and mechanical book programmer. In addition, the sewing machine is able to sew signatures having overlap (min. size 10 mm) from the same side. The automatic feeder can be supplied complete with the LAP OPENER DEVICE (OPTIONAL) to open overlapped signatures in both sides. MAGNUM 75 SEMI-AUTOMATIC Book Sewer
FRECCIA To render even more flexible the system, the gathering and sewing line mod. UNIT can be delivered complete with the COURIER. It is a device consisting of a gathered book blocks angle conveyor that, thanks to the gatherer s big production capacity, lets to feed concurrently one in line and one off line sewing machine, doubling the production capacity of the whole system. (optional) UNIT LINE CONCEPT LINE LAYOUT UNIT - CONCEPT gathering and sewing systems Smyth s.r.l. Regione Formica 10 - S.S. 31 bis, Casale-Torino, 15030 Coniolo (AL) Italy Tel.: 0142-56.33.66 - Fax: 0142-56.22.77 - E-mail: freccia@smyth.it sito web: www.smyth.it Rev 0 MAY. 2016
FRECCIA FRECCIA UNIT LINE CONCEPT LINE THE AUTOMATIC GATHERING AND SEWING LINE FRECCIA mod. UNIT consists of a VERTICAL gatherer FRECCIA mod. P12 connected in line with an Automatic Sewer (series 4D) and it is distinguished by the high production capacity and its low investment. THE NEW CONCEPT GATHERING AND SEWING SYSTEM combines the New HORIZONTAL gathering machine and Two or more Freccia 4D Sewing machines. This ergonomically simple design is operator friendly with easy loading of signatures to each sewing machine and the unloading of sewn book block piles.. VERTICAL LOADING GATHERER It is possible to load two signatures with maximum size of 320 mm (head/tail) (patented), in a sequential order and into the same gathering station. So that the floor dimensions of the complete line are REDUCED and the loading/unloading operations can be made by JUST ONE OPERATOR. The operator friendly design of the Gatherer s SET-UP and START operations, includes a series of conveniently located 5" inch touch screen monitors that allow verification of the correct working process of the line In order to make easier the sewn books unloading by the operator, at the end of the line, a STACKING CONVEYOR is installed, This device gives the possibility to make a sewn books piles at programmable height (up to 120 mm) having NOT TURNED book blocks spine. HORIZONTAL LOADING GATHERER The operating advantage in using this technology is the easy signature loading on the stations gatherer. Just as it is In the VERTICAL gatherer it is possible to load each station, with one or two signatures giving the advantage of doubling the number of sections in a sequential order up to a maximum, size Head to tail of 320 mm. (patented) reducing the floor space dimension of the line.