VERTICAL ELECTRIC WALL HANG WATER HEATERS ENERGY SAVING Pages 3-8 ELECTRIC WATER HEATERS Pages 9-25 WOOD WATER HEATERS Pages 26-29 MULTIGAS WATER HEATERS Pages 30-48 HEAT PUMP WATER HEATERS AND TREATMENT UNITS Pages 49-63 BOILERS WITH DOUBLE WALLED EXCHANGER Pages 64-66 BOILERS WITH WELDED COIL Pages 67-82 Pages 83-89 TANKS Catalogue 0/206
Evolution Founded in 960, Boschetti Industrie Meccaniche is a prime exponent of Italy s finest traditions of technical excellence in the heating and hot water sector. The continuous efforts of the firm in use of the most advanced technologies and in the constant search of a careful production for the environement and energy saving, allowed to Boschetti to produce a wide range of products according to the European standard. The company was founded and grew in the hardworking area of north-east Italy, thanks to the passion and resourcefulness of a family that has been able to conquer a place of honour as one of the most appreciated brands in its sector, and Boschetti is proud to offer all the values of production quality, technological brilliance and Italian style associated with its name. Design and production Advanced technical skills, experience, operative flexibility and a passion for innovation are the cornerstones of Boschetti s long and highly successful presence on the Italian and international heating and hot water market, coupled with an intense interest in the themes of sustainable energy and environmental protection. Every products processing cycle is executed inside the factory. It allows to verify the quality of the materials and components and check every steps of production. All items are tested by qualified staff. Boschetti is able to produce new models for the most different requests. Certification and approval Boschetti Industrie Meccaniche collaborates with important corporate of certification for technical advice. All products are guaranteed in compliance with applicable standards and CE certification requirements. Since 960 we have produced your hot water Made in Italy The company s versatile range of products, which includes gas, electric and wood-fired storage heaters and boilers for both domestic and industrial use, guaranteeing high performance and renowned for their robustness and reliability, is the result of an integrated philosophy developed entirely within the company, the hallmark of Made-in-Italy distinction with the indispensable objective of the maximum standards of safety and efficiency. The selection of materials, the development and the creativity of new projects and production technology, labour force and national services allows to safeguard the product quality and the wellness of the complete production chain. Boschetti for the environment Boschetti has always looked towards the future with technological innovations driven by a philosophy inspired by respect for the environment and the rational use of energy resources. It is also for this reason that a 200 kw photovoltaic system is used to power the factory and offices of the entire company, allowing vital energy to be produced from renewable sources. Page
Welding plant for domestic use tanks Tanks pressure test Press plant Welding plant for industrial use tanks Sandblasting plant Painting plant Functional test of products Page 2
VERTICAL ELECTRIC WALL HANG WATER HEATERS ENERGY SAVING BSEGOLD Vertical electric wall hang water heater energy saving BSETGOLD Vertical electric wall hang water heater energy saving - Thermo version BSETRONIC Vertical electric wall hang water heater energy saving Page 3
BSEGOLD VERTICAL ELECTRIC WALL HANG WATER HEATER ENERGY SAVING DESCRIPTION This electric water heater, designed to enhance its energy efficiency characteristics, is suitable in particular for domestic users, where energy savings are required. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and double insulation characteristics of this model, available in several versions (from 56 to 00 litres, also in a thermo version), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. BSEGOLD brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat and a protection rating against water splashes of IPX4. The thermo version is also pre-fitted for a temperature probe. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Electrical operation with single-phase 220 V On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated Thermostat adjustment knob The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 5 years Page 4
TECHNICAL DATA AND DIMENSIONS D BSEGOLD VERTICAL ELECTRIC WALL HANG WATER HEATER ENERGY SAVING h H G Cold water inlet g i Hot water outlet Heating element and thermostat unit DIMENSIONS BSEGOLD 50 BSEGOLD 80 BSEGOLD 00 D mm 460 460 460 H mm 625 825 985 h mm 255 230 280 G mm 489 489 489 g mm 86 86 86 i mm 20 20 20 - Ø /2" /2" /2" TECHNICAL DATA BSEGOLD 50 BSEGOLD 80 BSEGOLD 00 Capacity L 56 80 00 Storage tank Pmax bar 8 8 8 Power W 200 200 200 Voltage V 220-230 220-230 220-230 Single drawn at 40 C () L 2 60 200 Efficiency ΔT 45 C (2) L/h 23 23 23 24h consumption to mantain temperature kw 0,77,0,37 Weight Kg 22 25 28 ERP BSEGOLD 50 BSEGOLD 80 BSEGOLD 00 Energy class C C C Load profile M M L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 5
TECHNICAL DATA AND DIMENSIONS D BSETGOLD VERTICAL ELECTRIC WALL HANG WATER HEATER ENERGY SAVING - THERMO VERSION h H MT RT MT RT h3 h2 3* Cold water inlet g * Sheath for temperature probe is not supplied. Lenght has to be 270 mm. i 2 G MT RT 2 Hot water outlet Thermo flow Thermo return Heating element and thermostat unit Thermic sensor connection /2" 3 Thermic sensor sheath DIMENSIONS BSETGOLD 50 BSETGOLD 80 BSETGOLD 00 D mm 460 460 460 H mm 625 825 985 h mm 255 230 280 h2 mm 85 85 85 h3 mm 35 22 322 G mm 489 489 489 g mm 86 86 86 i mm 20 20 20 - Ø /2" /2" /2" MT - RT Ø 3/4 3/4" 3/4 TECHNICAL DATA BSETGOLD 50 BSETGOLD 80 BSETGOLD 00 Capacity L 56 80 00 Storage tank Pmax bar 8 8 8 Power W 200 200 200 Voltage V 220-230 220-230 220-230 Single drawn at 40 C () L 2 60 200 Efficiency ΔT 45 C (2) L/h 23 23 23 24h consumption to mantain temperature kw 0,85,2,5 Exchanger surface m² 0,33 0,33 0,33 THERMO Exchanger efficiency ΔT 45 C (3) L/h 85 85 85 EXCHANGER Weight Kg 26 29 32 ERP BSETGOLD 50 BSETGOLD 80 BSETGOLD 00 Energy class C C C Load profile M M L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 6
BSETRONIC VERTICAL ELECTRIC WALL HANG WATER HEATER ENERGY SAVING DESCRIPTION This electric water heater, designed to enhance its energy efficiency characteristics, is suitable in particular for domestic users, where drastic energy savings are required. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and double insulation characteristics of this model, available in several versions (from 56 to 00 litres), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. BSETRONIC is equipped with IQuaFlex technology, which intuitively manages energy resources based on user preferences. Over the first two weeks of use, this thermostat records all the moments of greatest use of hot water. Subsequently, taking this consumption to be typical of the user's needs, this system automatically heats water at the moment of effective use, regulating water temperature and obtaining significant energy savings. The thermostat is also fitted with an automatic anti-legionella and antifreezing device. A digital display mounted externally allows all functions to be monitored and controlled. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. BSETRONIC brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat and a protection rating against water splashes of IPX4. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Electrical operation with single-phase 220 V Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated Externally adjustable thermostat with digital display. Settings: holiday, IQuaFlex smart and manual The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 5 years Page 7
TECHNICAL DATA AND DIMENSIONS D BSETRONIC VERTICAL ELECTRIC WALL HANG WATER HEATER ENERGY SAVING h H 2 G g i Cold water inlet Hot water outlet Heating element and thermostat unit 2 Display DIMENSIONS BSETRONIC 50 BSETRONIC 80 BSETRONIC 00 D mm 460 460 460 H mm 625 825 985 h mm 255 230 280 G mm 489 489 489 g mm 86 86 86 i mm 20 20 20 - Ø /2" /2" /2" TECHNICAL DATA BSETRONIC 50 BSETRONIC 80 BSETRONIC 00 Capacity L 56 80 00 Storage tank Pmax bar 8 8 8 Power W 200 200 200 Voltage V 220-230 220-230 220-230 Single drawn at 40 C () L 2 60 200 Efficiency ΔT 45 C (2) L/h 23 23 23 24h consumption to mantain temperature kw 0,77,0,37 Weight Kg 22 25 28 ERP BSETRONIC 50 BSETRONIC 80 BSETRONIC 00 Energy class B B B Load profile M M M () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 8
ELECTRIC WATER HEATERS BSE Vertical electric wall hang water heater BSET Vertical electric wall hang water heater - Thermo version BSER/Q Point of use wall hang water heater square over sink version BSER/SQ Point of use wall hang water heater square under sink version BSEF Vertical electric wall hang water heater BSER/R Point of use wall hang water heater round over sink version BSER/SR Point of use wall hang water heater round under sink version OBSE Horizontal electric wall hang water heater OBSET Horizontal electric wall hang water heater - Thermo version BSEBD Electric water heater stand on domestic BSEBC Storage electric water heater stand on commercial BSETBC Storage electric water heater stand on commercial - Thermo version Page 9
BSE VERTICAL ELECTRIC WALL HANG WATER HEATER DESCRIPTION This electric water heater, designed to give long-lasting service, is suitable for domestic users and for the needs of small businesses. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and insulation characteristics of this model, available in several versions (from 56 to 200 litres, also in a thermo version), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. BSE brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat and a protection rating against water splashes of IPX4. The thermo version is also prefitted for a temperature probe. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Electrical operation with single-phase 220 V On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee from 3 to 5 years according to version Page 0
TECHNICAL DATA AND DIMENSIONS D BSE VERTICAL ELECTRIC WALL HANG WATER HEATER h H G Cold water inlet Hot water outlet Heating element and thermostat unit i g DIMENSIONS BSE 50 BSE 80 BSE 00 BSE 20 BSE 50 BSE 200 D mm 440 440 440 440 490 490 H mm 580 780 940 0 00 430 h mm 235 25 265 255 250 400 G mm 470 470 470 470 525 525 g mm 80 80 80 80 0 0 i mm 20 20 20 20 40 40 Ø /2" /2" /2" /2" /2" /2" Ø /2" /2" /2" /2" 3/4" 3/4" TECHNICAL DATA BSE 50 BSE 80 BSE 00 BSE 20 BSE 50 BSE 200 Capacity L 56 80 00 20 50 200 Storage tank Pmax bar 8 8 8 8 8 8 Power W 200 200 200 200 500 2000 Voltage V 220-230 220-230 220-230 220-230 220-230 220-230 Single drawn at 40 C () L 2 60 200 240 300 400 Efficiency ΔT 45 C (2) L/h 23 23 23 23 29 38 Weight Kg 20 24 27 32 43 56 ERP BSE 50 BSE 80 BSE 00 BSE 20 BSE 50 BSE 200 Energy class D D D D Load profile M M L L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page
TECHNICAL DATA AND DIMENSIONS D BSET VERTICAL ELECTRIC WALL HANG WATER HEATER - THERMO VERSION h H MT MT h3 h2 RT RT Cold water inlet 3 * MT Hot water outlet Thermo flow G RT 2 Thermo return Heating element and thermostat unit Thermic sensor connection /2" 3 Thermic sensor sheath 2 i g * Sheath for temperature probe is not supplied. Lenght has to be 270 mm. DIMENSIONS BSET 50 BSET 80 BSET 00 BSET 20 BSET 50 BSET 200 D mm 440 440 440 440 490 490 H mm 580 780 940 0 00 430 h mm 90 25 265 255 250 400 h2 mm 85 85 85 85 520 520 h3 mm 35 22 322 492 37 305 G mm 470 470 470 470 525 525 g mm 80 80 80 80 0 0 i mm 20 20 20 20 40 40 Ø /2" /2" /2" /2" /2" /2" Ø /2" /2" /2" /2" 3/4 3/4" MT - RT Ø 3/4 3/4" 3/4 3/4" 3/4 3/4" TECHNICAL DATA BSET 50 BSET 80 BSET 00 BSET 20 BSET 50 BSET 200 Capacity L 56 80 00 20 50 200 Storage tank Pmax bar 8 8 8 8 8 8 Power W 200 200 200 200 500 2000 Voltage V 220-230 220-230 220-230 220-230 220-230 220-230 Single drawn at 40 C () L 2 60 200 240 300 400 Efficiency ΔT45 C (2) L/h 23 23 23 23 29 38 Exchanger surface m² 0,33 0,33 0,33 0,33 0,87 0,87 THERMO Exchanger efficiency ΔT 45 C (3) L/h 85 85 85 85 204 204 EXCHANGER Weight Kg 24 28 3 36 53 66 ERP BSET 50 BSET 80 BSET 00 BSET 20 BSET 50 BSET 200 Energy class D D D D Load profile M M L L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 2
BSEF VERTICAL ELECTRIC WALL HANG WATER HEATER DESCRIPTION This electric water heater, is suitable for domestic users and for the needs of small businesses. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and insulation characteristics of this model, available in several versions (50-80 - 00 litres), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. The attentive preparation of materials and exclusive assembly methods guarantee the perfect perfect application of protective resin finishes (vitreous enamel) inside the tank. BSEF brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat and a protection rating IP 23. Electrical operation with single-phase 220-240 V Insulation consists in rigid polyurethane foam The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an anode in magnesium alloy External knob for temperature regulation Flange with 5 bolts for coupling the heating unit Guarantee 3 years Page 3
TECHNICAL DATA AND DIMENSIONS D h2 BSEF VERTICAL ELECTRIC WALL HANG WATER HEATER h H G Cold water inlet Hot water outlet Heating element and thermostat unit i g DIMENSIONS BSEF 50 BSEF 80 BSEF 00 D mm 440 440 440 H mm 545 750 970 h mm 200 80 80 h2 mm 265 265 264 G mm 460 460 460 g mm 30 30 30 i mm 00 00 00 Ø /2" /2" /2" Ø /2" /2" /2" TECHNICAL DATA BSEF 50 BSEF 80 BSEF 00 Capacity L 50 80 00 Storage tank Pmax bar 8 8 8 Power W 200 200 500 Voltage V 220-240 220-240 220-240 Frequency Hz 50/60 50/60 50/60 Heating time ΔT45 C hh:mm 02:0 03:30 03:30 Protection rating IP 23 IP 23 IP 23 Weight Kg 9 24 28 ERP BSEF 50 BSEF 80 BSEF 00 Energy class D D D Load profile M M L NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 4
OBSE HORIZONTAL ELECTRIC WALL HANG WATER HEATER DESCRIPTION This electric water heater, designed to give long-lasting service, is suitable for domestic users and for the needs of small businesses. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and insulation characteristics of this model ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power, due above all to the position of the heating element, which allows a higher efficiency to be obtained, together with easier maintenance. The position of hot water joints also ensures great versatility in adapting the heater to any system. On the OBSE model, available in several versions (from 56 to 200 litres, also in a thermo version), the attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. OBSE brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat. The thermo version is also pre-fitted for a temperature probe. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Electrical operation with single-phase 220 V On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on the right Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 5 years Page 5
TECHNICAL DATA AND DIMENSIONS d2 OBSE HORIZONTAL ELECTRIC WALL HANG WATER HEATER D d = i = L = L = Cold water inlet Hot water outlet Heating element and thermostat unit DIMENSIONS OBSE 50 OBSE 80 OBSE 00 OBSE 20 OBSE 50 OBSE 200 D mm 440 440 440 440 490 490 L mm 540 740 900 070 055 385 L mm 00 265 385 560 585 585 d mm 240 240 240 240 270 270 d2 mm 65 65 65 65 90 90 i mm 60 60 60 60 60 60 Ø /2" /2" /2" /2" /2" /2" Ø /2" /2" /2" /2" 3/4" 3/4" TECHNICAL DATA OBSE 50 OBSE 80 OBSE 00 OBSE 20 OBSE 50 OBSE 200 Capacity L 56 80 00 20 50 200 Storage tank Pmax bar 8 8 8 8 8 8 Power W 200 200 200 200 500 2000 Voltage V 220-230 220-230 220-230 220-230 220-230 220-230 Single drawn at 40 C () L 90 28 60 92 240 320 Efficiency ΔT45 C (2) L/h 23 23 23 23 29 38 Weight Kg 2 26 29 33 45 57 ERP OBSE 50 OBSE 80 OBSE 00 OBSE 20 OBSE 50 OBSE 200 Energy class D D D D Load profile M M M L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 6
TECHNICAL DATA AND DIMENSIONS d2 MT Since 960 we have produced your hot water OBSET HORIZONTAL ELECTRIC WALL HANG WATER HEATER - THERMO VERSION D 2 3 d = i = RT L = L = MT RT 2 Cold water inlet Hot water outlet Thermo flow Thermo return Heating element and thermostat unit Thermic sensor connection "¼ 3 Thermic sensor sheath L2 * Sheath for temperature probe is not supplied. Lenght has to be 270 mm. DIMENSIONS OBSET 80 OBSET 00 OBSET 20 OBSET 50 OBSET 200 D mm 440 440 440 490 490 L mm 740 900 070 055 385 L mm 265 385 560 585 585 L2 mm 25 25 30 200 200 d mm 240 240 240 270 270 d2 mm 65 65 65 90 90 i mm 60 60 60 60 60 Ø /2" /2" /2" /2" /2" Ø /2" /2" /2" 3/4 3/4" MT - RT Ø 3/4" 3/4 3/4" 3/4 3/4" TECHNICAL DATA OBSET 80 OBSET 00 OBSET 20 OBSET 50 OBSET 200 Capacity L 80 00 20 50 200 Storage tank Pmax bar 8 8 8 8 8 Power W 200 200 200 500 2000 Voltage V 220-230 220-230 220-230 220-230 220-230 Single drawn at 40 C () L 00 20 44 80 240 Efficiency ΔT45 C (2) L/h 23 23 23 29 38 Exchanger surface m² 0,2 0,33 0,33 0,35 0,60 THERMO Exchanger efficiency ΔT45 C (3) L/h 40 60 60 60 00 EXCHANGER Weight Kg 29 33 37 49 64 ERP OBSET 80 OBSET 00 OBSET 20 OBSET 50 OBSET 200 Energy class D D D Load profile M M L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 7
BSER POINT OF USE WALL HANG WATER HEATER DESCRIPTION This type of electric water heater (available from 0 to 5 and 30 litres, in a round or square version, with joints suitable for installation above or below a sink) is suitable for the limited supplies of hot water typical of kitchens, bathrooms or showers. It is the ideal solution in situations where hot water is needed rapidly, reaching full operating temperature in a very short time (for example, just 30 minutes for a shower with an average flow). The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. BSER brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat and a protection rating against water splashes of IPX4. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Electrical operation with single-phase 220 V Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" According to the version, the carefully designed and constructed external housing is made in impact-resistant hotmoulded polystyrene for square models, and for round models, in sheet metal coated with white resins stove-fired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee from 3 to 5 years according to version Page 8
TECHNICAL DATA AND DIMENSIONS L = a = P BSER POINT OF USE WALL HANG WATER HEATER H h SQUARE OVER SINK VERSION BSER/Q i Cold water inlet i Hot water outlet Heating element and thermostat unit H SQUARE UNDER SINK VERSION BSER/SQ h = a = L P DIMENSIONS BSER/Q 0 BSER/SQ 0 L mm 355 355 H mm 405 405 h mm 90 90 a mm 20 20 P mm 90 90 i mm 45 45 Ø /2" /2" Ø /2" /2" TECHNICAL DATA BSER/Q 0 BSER/SQ 0 Capacity L 0 0 Storage tank Pmax bar 8 8 Power W 200 200 Voltage V 220-230 220-230 Single drawn at 40 C () L 20 20 Efficiency ΔT45 C (2) L/h 23 23 Weight Kg 6,5 6,5 ERP BSER/Q 0 BSER/SQ 0 Energy class A B Load profile XXS XXS () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 9
TECHNICAL DATA AND DIMENSIONS D = a = P BSER POINT OF USE WALL HANG WATER HEATER h ROUND OVER SINK VERSION BSER/R i i Cold water inlet Hot water outlet Heating element and thermostat unit 0-5 h ROUND UNDER SINK VERSION BSER/SR 30 = a = D P DIMENSIONS BSER/R 0 BSER/R 5 BSER/R 30 BSER/SR 0 BSER/SR 5 D mm 400 400 460 400 400 h mm 00 00 5 00 00 a mm 90 90 90 90 90 P mm 20 255 330 20 255 i mm 45 45 45 45 45 Ø /2" /2" /2" /2" /2" Ø /2" /2" /2" /2" /2 TECHNICAL DATA BSER/R 0 BSER/R 5 BSER/R 30 BSER/SR 0 BSER/SR 5 Capacity L 0 5 30 0 5 Storage tank Pmax bar 8 8 8 8 8 Power W 200 500 500 200 500 Voltage V 220-230 220-230 220-230 220-230 220-230 Single drawn at 40 C () L 20 30 60 20 30 Efficiency ΔT45 C (2) L/h 23 29 29 23 29 Weight Kg 7,5 8 0,5 7,5 8 ERP BSER/R 0 BSER/R 5 BSER/R 30 BSER/SR 0 BSER/SR 5 Energy class A A B B B Load profile XXS XXS S XXS XXS () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 20
BSEBD ELECTRIC WATER HEATER STAND ON DOMESTIC DESCRIPTION This electric water heater, designed to give long-lasting service, is suitable in particular for domestic users. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and insulation characteristics of this model, available in several versions (from 50 and 200 litres), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. BSEBD brings domestic users all the necessary comfort and safety thanks to a bipolar safety thermostat. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. Electrical operation with single-phase 220 V Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 3 years Page 2
TECHNICAL DATA AND DIMENSIONS BSEBD i D ELECTRIC WATER HEATER STAND ON DOMESTIC H h S g G S Cold water inlet Hot water outlet Water drain Heating element and thermostat unit DIMENSIONS BSEBD 50 BSEBD 200 D mm 490 490 H mm 060 390 h mm 35 465 G mm 533 533 g mm 89 89 i mm 40 40 - Ø /2" /2" S Ø 3/4" 3/4" TECHNICAL DATA BSEBD 50 BSEBD 200 Capacity L 50 200 Storage tank Pmax bar 8 8 Power W 500 2000 Voltage V 220-230 220-230 Single drawn at 40 C () L 300 400 Efficiency ΔT45 C (2) L/h 29 38 Weight Kg 45 55 Energy class Load profile ERP BSEBD 50 BSEBD 200 () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 22
BSEBC STORAGE ELECTRIC WATER HEATER STAND ON COMMERCIAL DESCRIPTION This electric water heater, designed to give long-lasting service, is suitable for prevalently commercial users. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and insulation characteristics of this model, available in several versions (from 200 to 000 litres, and also in a thermo version), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective resin finishes (vitreous enamel on versions up to 500 litres, and galvanization on radiator versions and for 800-litre and 000-litre models), inside the tank. Electrical fittings consist in single-phase electrical heating elements of excellent quality and appropriate length and power, positioned to guarantee optimal operation, energy savings and the complete heating of all water in the tank. Suitably connected, these heating elements can operate with single-phase 220 V power, or with triple-phase 220 V or 380 V power, coordinated by a bipolar safety thermostat. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 2 years Page 23
TECHNICAL DATA AND DIMENSIONS BSEBC D BSEBC 200-300-400-500 BSEBC 800-000 STORAGE ELECTRIC WATER HEATER STAND ON COMMERCIAL R R H h S S i g Cold water inlet G G Hot water outlet S Water drain R Recirculation Heating element and thermostat unit Safety valve H2O is not included for the models BSEBC 800-000 DIMENSIONS BSEBC 200 BSEBC 300 BSEBC 400 BSEBC 500 BSEBC 800 BSEBC 000 D mm 550 550 650 660 90 90 H mm 55 625 570 900 595 940 h mm 205 675 635 965 G mm 605 605 705 705 955 030 g mm 90 90 90 90 i mm 40 40 40 40 S Ø 2 2 R Ø 3/4" 3/4" 3/4" 3/4" ¼ ¼ Ø 3/4" 3/4" " " 2" 2" Ø 3/4" 3/4" " " 2" 2" TECHNICAL DATA BSEBC 200 BSEBC 300 BSEBC 400 BSEBC 500 BSEBC 800 BSEBC 000 Capacity L 200 300 400 500 800 000 Storage tank Pmax bar 6 6 6 6 6 6 Power W 3 x 200 3 x 200 3 x 2000 3 x 2000 3 x 3000 6 x 500 Voltage V 220-230/380 220-230/380 220-230/380 220-230/380 220-230/380 220-230/380 Single drawn at 40 C () L 400 600 800 000 600 2000 Efficiency ΔT45 C (2) L/h 69 69 5 5 72 72 Weight Kg 80 02 4 6 200 280 Energy class Load profile ERP BSEBC 200 BSEBC 300 BSEBC 400 BSEBC 500 BSEBC 800 BSEBC 000 D XL () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 24
TECHNICAL DATA AND DIMENSIONS D BSETBC 200-300-400-500 BSETBC 800-000 BSETBC STORAGE ELECTRIC WATER HEATER STAND ON COMMERCIAL - THERMO VERSION R R H h h3 MT h3 MT RT S h2 S h2 RT i Cold water inlet Hot water outlet g MT Thermo flow G G RT Thermo return S R Water drain Recirculation Heating element and thermostat unit Safety valve H2O is not included for the models BSEBC 800-000 DIMENSIONS BSETBC 200 BSETBC 300 BSETBC 400 BSETBC 500 BSETBC 800 BSETBC 000 D mm 550 550 650 660 90 90 H mm 55 625 570 900 595 940 h mm 205 675 635 965 h2 mm 435 435 465 465 480 580 h3 mm 220 490 490 490 490 490 G mm 605 605 705 705 955 030 g mm 90 90 90 90 i mm 40 40 40 40 S Ø 2 2 R Ø 3/4" 3/4" 3/4" 3/4" ¼ ¼ - Ø 3/4" 3/4" " " 2" 2" MT - RT Ø " " " " " " TECHNICAL DATA BSETBC 200 BSETBC 300 BSETBC 400 BSETBC 500 BSETBC 800 BSETBC 000 Capacity L 200 300 400 500 800 000 Storage tank Pmax bar 6 6 6 6 6 6 Power W 3 x 200 3 x 200 3 x 2000 3 x 2000 3 x 3000 6 x 500 Voltage V 220-230/380 220-230/380 220-230/380 220-230/380 220-230/380 220-230/380 Single drawn at 40 C () L 400 600 800 000 600 2000 Efficiency ΔT45 C (2) L/h 69 69 5 5 72 72 Exchanger surface m² 0,5,2,2,7,7 THERMO Exchanger efficiency ΔT 45 C (3) L/h 33 266 320 320 453 453 EXCHANGER Weight Kg 90 20 63 83 235 35 Energy class Load profile ERP BSETBC 200 BSETBC 300 BSETBC 400 BSETBC 500 BSETBC 800 BSETBC 000 D XL () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 25
WOOD WATER HEATERS BL Wood water heater BLE Wood-electric water heater BLET Wood-electric water heater - Thermo version Page 26
BL WOOD WATER HEATER DESCRIPTION This water heater with zero costs for gas or electricity bills is designed for domestic users wishing to reduce their energy costs for the production of hot water. This model therefore offers characteristics of sustainability, a factor of primary importance for Boschetti. Easy installation, practical operation and safety are also guaranteed in the BLE version (with an electrical heating element to ensure the hot water supply if wood is not available) and the BLET version (where in addition to the electrical heating element, secondary heat sources can also be used). With a combustion chamber with a refractory lining and insulation in high-density glass wool, this water heater is able to generate a hot water supply suitable for the needs of entire families. The tank is finished in vitreous enamel on BL 5/50 and BLE 5/50 versions, and galvanized for 80-litre and BLET 5/50 versions. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. All models have the grate stove-enamelled at 830 C, guaranteeing shininess and resistance to impacts, scratches and heat. On BLET versions, the heat exchangers have a cavity with joints on two sides on 5 and 50 litre versions and a double pipe with rear joints on 80 litre versions The water heater is provided with a suitable coupling /2" for the installation of the safety combined temperature and pressure valve (TP), which controls and limits the temperature and pressure of the hot water inside the product. The combined temperature and pressure valve (TP) is a PED safety device Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 3 years Page 27
TECHNICAL DATA AND DIMENSIONS BL - BLE D WOOD VERSION BL WOOD-ELECTRIC VERSION BLE D WOOD WATER HEATER WOOD-ELECTRIC WATER HEATER 2 2 H h h H S S i i 5-50 80 G G Cold water inlet Hot water outlet S Water drain 3 Connection for exhaust pipe 2 Connection for TP valve 3 Heating element and thermostat lenght mm 760 DIMENSIONS BL 80 BLE 80 BLE 5 BLE 50 D mm 350 350 440 440 H mm 440 440 430 630 h mm 465 465 485 685 G mm 45 45 505 505 i mm 30 30 20 20 - Ø /2" /2" /2" /2" S Ø Ø 80 80 80 80 2 Ø /2" /2" /2" /2" TECHNICAL DATA BL 80 BLE 80 BLE 5 BLE 50 Capacity L 80 80 5 50 Storage tank Pmax bar 8 8 8 8 Power W 000 000 000 Voltage V 220-230 220-230 220-230 Efficiency ΔT45 C L/h 9 9 9 Weight Kg 54 54 78 8 NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 28
TECHNICAL DATA AND DIMENSIONS BLET 80 BLET 5-50 D D BLET WOOD-ELECTRIC WATER HEATER - THERMO VERSION 2 MT H h h3 RT H h3 MT h S S RT h2 h2 i 2 i 5-50 80 G G 3 3 MT RT Cold water inlet Hot water outlet Thermo flow Thermo return S Water drain Connection for exhaust pipe 2 Connection for TP valve 3 Heating element and thermostat lenght mm 760 DIMENSIONS BLET 80 BLET 5 BLET 50 D mm 350 440 440 H mm 440 430 630 h mm 465 485 685 h2 mm 525 475 475 h3 mm 460 420 420 G mm 45 505 505 i mm 30 20 20 - Ø /2" /2" /2" MT - RT Ø 3/4" 3/4" 3/4" S Ø Ø 80 80 80 2 Ø /2" /2" /2" TECHNICAL DATA BLET 80 BLET 5 BLET 50 Capacity L 80 5 50 Storage tank Pmax bar 8 8 8 Power W 000 000 000 Voltage V 220-230 220-230 220-230 Efficiency ΔT45 C L/h 9 9 9 Exchanger surface m² 0,4 0,60 0,60 THERMO Exchanger efficiency ΔT45 C L/h 36 55 55 EXCHANGER Weight Kg 57 87 90 NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 29
MULTIGAS WATER HEATERS BGM Wall hang multigas storage water heater BGMT Wall hang multigas storage water heater - Thermo version BGM/BI Storage multigas water heater stand on industrial BGMT/BI Storage multigas water heater stand on industrial - Thermo version BGM/CSTF Wall hang multigas water heater sealed chamber forced flow BGM/CS Storage multigas water heater sealed chamber BGM/T/CS Storage multigas water heater sealed chamber - Thermo version BGM/BD Storage multigas water heater stand on domestic BGM/BA Storage multigas water heater stand on commercial BGM/T/BA Storage multigas water heater stand on commercial - Thermo version Page 30
BGM WALL HANG MULTIGAS STORAGE WATER HEATER DESCRIPTION This multigas water heater (pre-fitted for use with both LPG and methane) is designed for domestic needs. With its ample combustion chamber, a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. Also available in a thermo version, BGM brings the home a water heating efficiency of 86%, a value higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner and internal deflectors are made in stainless steel, to guarantee maximum efficiency and safety over time. The special non-return hood, which stops the appliance in case of the abnormal extraction of fumes, is made in aluminium, and also reduces the formation of condensation inside the combustion chamber. The advantages of the BGM model include the attentive preparation of materials and exclusive assembly methods, which guarantee the perfect application of protective resin finishes (vitreous enamel). The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Designed with a low coefficient of heat loss and high efficiency, with condensation evaporation in compliance with the DIN EN 89 standard Product with DVGW certification, guaranteeing high standards of efficiency and safety, in total respect of the environment On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 3 years Page 3
TECHNICAL DATA AND DIMENSIONS g2 D df BGM WALL HANG MULTIGAS STORAGE WATER HEATER h H EG G Cold water inlet Natural Gas On demand LPG (BGM/ GPL) Hot water outlet g EG Gas inlet connection i DIMENSIONS BGM/5Q BGM/8Q BGM/0Q BGM/2Q BGM/5Q D mm 440 440 440 440 440 H mm 755 960 30 270 390 h mm 340 325 325 475 475 df mm 80 80 80 80 80 G mm 470 470 470 470 470 g mm 76 76 76 76 76 g2 mm 6 6 6 6 6 i mm 20 20 20 20 20 - Ø /2" /2" /2" /2" /2" EG Ø /2" /2" /2" /2" /2" TECHNICAL DATA BGM/5Q BGM/8Q BGM/0Q BGM/2Q BGM/5Q Capacity L 50 80 00 20 40 Storage tank Pmax bar 8 8 8 8 8 Heat capacity kw 4,6 5,3 5,3 5,3 5,3 Single drawn at 40 C () L 00 60 200 240 280 Efficiency ΔT45 C (2) L/h 75 85 85 85 85 Consumption Natural Gas m³/h 0,49 0,56 0,56 0,56 0,56 Consumption LPG kg/h 0,36 0,42 0,42 0,42 0,42 Weight Kg 26 33 4 5 56 ERP BGM/5Q BGM/8Q BGM/0Q BGM/2Q BGM/5Q Energy class B B B B B Load profile M M M L L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 32
TECHNICAL DATA AND DIMENSIONS g2 D df BGMT WALL HANG MULTIGAS STORAGE WATER HEATER - THERMO VERSION h H MT h2 EG RT h3 G Cold water inlet Natural Gas On demand LPG (BGMT/ GPL) g MT Hot water outlet Thermo flow i RT Thermo return EG Gas inlet connection DIMENSIONS BGMT/8Q BGMT/0Q BGMT/5Q D mm 440 440 440 H mm 960 30 390 h mm 325 325 475 h2 mm 85 85 85 h3 mm 80 80 85 df mm 80 80 80 G mm 470 470 470 g mm 76 76 76 g2 mm 6 6 6 i mm 20 20 20 - Ø /2" /2" /2" EG Ø /2" /2" /2" TECHNICAL DATA BGMT/8Q BGMT/0Q BGMT/5Q Capacity L 80 00 40 Storage tank Pmax bar 8 8 8 Heat capacity kw 5,3 5,3 5,3 Single drawn at 40 C () L 60 200 280 Efficiency ΔT45 C (2) L/h 85 85 85 Consumption Natural Gas m³/h 0,56 0,56 0,56 Consumption LPG kg/h 0,42 0,42 0,42 Exchanger surface m² 0,33 0,33 0,33 THERMO Exchanger efficiency ΔT45 C (3) L/h 85 85 85 EXCHANGER Weight Kg 37 45 6 ERP BGMT/8Q BGMT/0Q BGMT/5Q Energy class B B B Load profile M M L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 33
BGM/CSTF WALL HANG MULTIGAS WATER HEATER SEALED CHAMBER FORCED FLOW DESCRIPTION This multigas water heater (pre-fitted for use with both LPG and methane) is designed for domestic users, ensuring savings, easy installation, practical operation and safety. With its ample sealed combustion chamber, a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. BGM/CSTF brings domestic users a water heating efficiency up to two times higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner and internal deflectors are made in stainless steel, to guarantee maximum efficiency and safety over time. The advantages of the BGM/CSTF model, available in two versions (from 75 to 5 litres, see chart below), include the attentive preparation of materials and exclusive assembly methods, which guarantee the perfect application of protective resin finishes (vitreous enamel). Designed from the outset with a coaxial discharge, combustion fumes are expelled from the top by a fan, combined with an air intake with a specific connector on the heater. In addition, the sealed combustion chamber eliminates the "chimney effect", which is the circulation of cold air through the outlet flue for fumes when the burner is turned off. Specific kits are available for conversion into a version with double discharge. The heater is equipped with an electronic control unit, an electric gas valve and electronic ignition. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated Flange for inspection and limescale removal Combustion, ignition and turn-off controls on electronic panel Electronic ignition with ionization flame detection The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 2 years Page 34
TECHNICAL DATA AND DIMENSIONS 90 240 2 BGM/CSTF WALL HANG MULTIGAS WATER HEATER SEALED CHAMBER FORCED FLOW 20 h H h2 EG 325 75 65 460 60 295 80 450 85 80 Natural Gas On demand LPG (BGM/CSTF GPL) EG Cold water inlet Hot water outlet Gas inlet connection 2 Outer diameter air inlet Inner diameter exhaust fumes DIMENSIONS BGM/8Q/CSTF BGM/2Q/CSTF H mm 040 400 h mm 835 95 h2 mm 895 255 - Ø /2" /2" EG Ø 3/8" 3/8" Ø 60 60 2 Ø 38 38 TECHNICAL DATA BGM/8Q/CSTF BGM/2Q/CSTF Capacity L 75 5 Storage tank Pmax bar 6 6 Heat capacity kw 5,0 5,0 Water yeld kw 4,7 4,7 Single drawn at 25 C () L 50 23 Efficiency ΔT45 C L/h 85 85 Voltage V 220-240 220-240 Frequency Hz 50 50 Power consumption W 26 26 Weight Kg 49 74 ERP BGM/8Q/CSTF BGM/2Q/CSTF Energy class B B Load profile M L () Thermostat at 70 C. Flow water temperature 0 C. NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 35
EXAMPLE OF WATER SUPPLY SYSTEM - COLD WATER INLET - HOT WATER OUTLET HYDRAULIC SETY DEVICE 2 EXPANSION VESSEL 3 WATER SOFTENER OR PURIFIER 4 FILTER 5 PRESSURE-REDUCING VALVE 6 SHUT-OFF VALVE 7 SHUT-OFF VALVE BGM/CSTF WALL HANG MULTIGAS WATER HEATER SEALED CHAMBER FORCED FLOW 7 2 3 4 5 6 DISCHARGE EXAMPLES HORIZONTAL KIT VERTICAL KIT SPLIT KIT LENGTH OF CONNECTIONS AIR DISCHARGE MAX 3 Mt without elbow junction MAX 2 Mt with elbow junction 90 MAX Mt with 2 elbow junctions 90 LENGTH OF CONNECTIONS AIR DISCHARGE MAX 2 Mt with elbow junction 90 LENGTH OF CONNECTIONS AIR DISCHARGE MAX 6 Mt without elbow junction MAX 5 Mt with elbow junction 90 MAX 4 Mt with 2 elbow junctions 90 MAX 3 Mt with 3 elbow junctions 90 MAX 2 Mt with 4 elbow junctions 90 MAX Mt with 5 elbow junctions 90 Page 36
BGM/BD STORAGE MULTIGAS WATER HEATER STAND ON DOMESTIC DESCRIPTION This multigas water heater (pre-fitted for use with both LPG and methane) is designed for domestic needs. With its ample combustion chamber, a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. BGM/BD brings domestic users a water heating efficiency of 86%, a value higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner and internal deflectors are made in stainless steel, to guarantee maximum efficiency and safety over time. The special non-return hood, which stops the appliance in case of the abnormal extraction of fumes, is made in aluminium, and also reduces the formation of condensation inside the combustion chamber. The advantages of the BGM/BD model include the attentive preparation of materials and exclusive assembly methods, which guarantee the perfect application of protective resin finishes (vitreous enamel). The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Designed with a low coefficient of heat loss and high efficiency, with condensation evaporation in compliance with the DIN EN 89 standard Product with DVGW certification, guaranteeing high standards of efficiency and safety, in total respect of the environment Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 3 years Page 37
TECHNICAL DATA AND DIMENSIONS BGM/BD D df STORAGE MULTIGAS WATER HEATER STAND ON DOMESTIC R H EG S Cold water inlet Hot water outlet 45 i g Natural Gas On demand LPG (BGM/BD GPL) EG S Gas inlet connection Water drain G R Recirculation DIMENSIONS BGM/Q/BD BGM/5Q/BD BGM/20Q/BD D mm 490 490 490 H mm 50 400 650 df mm 80 80 80 G mm 50 50 50 g mm 06 06 06 i mm 200 200 200 - Ø 3/4" 3/4" 3/4" EG Ø /2" /2" /2" S Ø R Ø 3/4" 3/4" 3/4" TECHNICAL DATA BGM/Q/BD BGM/5Q/BD BGM/20Q/BD Capacity L 5 50 90 Storage tank Pmax bar 6 6 6 Heat capacity kw 8,2 8,2 8,2 Single drawn at 40 C () L 230 300 380 Efficiency ΔT45 C (2) L/h 32 32 32 Consumption Natural Gas m³/h 0,87 0,87 0,87 Consumption LPG kg/h 0,65 0,65 0,65 Weight Kg 49 65 78 ERP BGM/Q/BD BGM/5Q/BD BGM/20Q/BD Energy class B B B Load profile L L L () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 38
BGM/BA STORAGE MULTIGAS WATER HEATER STAND ON COMMERCIAL DESCRIPTION This multigas water heater (pre-fitted for use with both LPG and methane) is designed to supply large quantities of hot water. With its ample combustion chamber (from 6 to 2 flues), a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. Also available in a thermo version, BGM/BA brings businesses, apartment blocks and communities a water heating efficiency of 87%, a value higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner is made in stainless steel, to guarantee maximum efficiency and safety over time. The special double anti-return hood, which stops the appliance in case of the abnormal extraction of fumes, is made in aluminium, and also reduces the formation of condensation inside the combustion chamber and increases the efficiency of the water heater. The advantages of the BGM/BA model include the attentive preparation of materials and exclusive assembly methods, which guarantee the perfect application of protective resin finishes (vitreous enamel, for versions up to 600 litres, and galvanization for all other models). The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Designed with a low coefficient of heat loss and high efficiency, with condensation evaporation in compliance with the DIN EN 89 standard Product with DVGW certification, guaranteeing high standards of efficiency and safety, in total respect of the environment On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 2 years Page 39
TECHNICAL DATA AND DIMENSIONS D BGM5Q-60Q/BA df BGM80Q-200Q/BA BGM/BA STORAGE MULTIGAS WATER HEATER STAND ON COMMERCIAL R R H S EG EG S i Cold water inlet Hot water outlet G G EG S R Gas inlet connection Water drain Recirculation Natural Gas On demand LPG (BGM/BA GPL) The following models the H2O safety valve is not included: BGM80Q-00Q-50Q-200Q/BA DIMENSIONS BGM5Q/BA BGM20Q/BA BGM30Q/BA BGM40Q/BA BGM50Q/BA BGM60Q/BA BGM80Q/BA BGM00Q/BA BGM50Q/BA BGM200Q/BA D mm 550 550 650 660 750 760 90 90 20 20 Df mm 00 00 20 20 40 40 40 40 40 40 H mm 355 600 680 2050 95 2255 220 2490 2320 2820 G mm 620 620 725 725 825 825 975 975 275 275 i mm 40 40 40 40 40 40 - Ø 3/4 3/4 2 2 2 2 EG Ø /2" /2" /2" /2" /2" /2" /2" /2" /2" /2" S Ø /2" /2" /2" /2" /2" /2" 2 2 2 ½ 2 ½ R Ø 3/4" 3/4" 3/4" 3/4" " " 2 2 2 ½ 2 ½ TECHNICAL DATA BGM5Q/BA BGM20Q/BA BGM30Q/BA BGM40Q/BA BGM50Q/BA BGM60Q/BA BGM80Q/BA BGM00Q/BA BGM50Q/BA BGM200Q/BA Capacity L 50 200 300 400 470 590 755 950 400 900 Storage tank Pmax bar 6 6 6 6 6 6 6 6 6 6 Heat capacity kw 4 4 23,2 23,2 29,5 29,5 34 34 34 34 Single drawn at 40 C () L 300 400 600 800 940 80 50 900 2800 3800 Efficiency ΔT45 C (2) L/h 226 226 380 380 477 477 555 555 555 555 Burner surface m² 0,82,,7 2,2 2,3 2,8 3,3 3,3 3,3 3,3 Consumption Natural Gas m³/h,48,48 2,45 2,45 3,2 3,2 3,6 3,6 3,6 3,6 Consumption LPG kg/h,0,0,83,83 2,32 2,32 2,68 2,68 2,68 2,68 Weight Kg 86 98 37 67 208 237 307 353 489 550 ERP BGM5Q/BA BGM20Q/BA BGM30Q/BA BGM40Q/BA BGM50Q/BA BGM60Q/BA BGM80Q/BA BGM00Q/BA BGM50Q/BA BGM200Q/BA Energy class B B B B C C D D Load profile L XL XL XL XXL XXL XXL XXL () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 40
TECHNICAL DATA AND DIMENSIONS D df BGM/T/BA STORAGE MULTIGAS WATER HEATER STAND ON COMMERCIAL - THERMO VERSION R H MT h2 RT EG S h i Cold water inlet Hot water outlet MT RT EG Thermo flow Thermo return Gas inlet connection G Natural Gas On demand LPG (BGM/T/BA GPL) S Water drain R Recirculation DIMENSIONS BGM/T/20Q/BA BGM/T/30Q/BA BGM/T/50Q/BA BGM/T/60Q/BA D mm 550 650 750 760 Df mm 00 20 40 40 H mm 600 680 95 2255 G mm 620 725 825 825 i mm 40 40 40 40 h mm 405 420 500 500 h2 mm 390 490 790 890 - Ø 3/4 MT - RT Ø EG - S Ø /2" /2" /2" /2" R Ø 3/4" 3/4" " " TECHNICAL DATA BGM/T/20Q/BA BGM/T/30Q/BA BGM/T/50Q/BA BGM/T/60Q/BA Capacity L 200 300 470 590 Storage tank Pmax bar 6 6 6 6 Heat capacity kw 4 23,2 29,5 29,5 Single drawn at 40 C () L 400 600 940 80 Efficiency ΔT45 C (2) L/h 226 380 477 477 Burner surface m²,,7 2,3 2,8 Consumption Natural Gas m³/h,48 2,45 3,2 3,2 Consumption LPG kg/h,0,83 2,32 2,32 Exchanger surface m² 0,77, 2,03 2,25 THERMO Exchanger efficiency ΔT45 C (3) L/h 205 296 54 600 EXCHANGER Weight Kg 2 57 244 277 ERP BGM/T/20Q/BA BGM/T/30Q/BA BGM/T/50Q/BA BGM/T/60Q/BA Energy class B B C C Load profile XL XL XXL XXL () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 4
BGM/BI STORAGE MULTIGAS WATER HEATER STAND ON INDUSTRIAL WATER HEATER SUITABLE FOR INDUSTRIAL USE ONLY DESCRIPTION This multigas model (pre-fitted for use with both LPG and methane) has been designed exclusively for use in industrial installations. With its ample combustion chamber (from 22 to 26 flues), a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. BGM/BI brings multiple users and industrial buildings a water heating efficiency up to two times higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner is made in stainless steel, to guarantee maximum efficiency and safety over time. The special non-return hood, which stops the appliance in case of the abnormal extraction of fumes, is made in aluminium, and also reduces the formation of condensation inside the combustion chamber. The BGM/BI model is available in several versions (from 800 to 2000 litres, and also with thermo version). The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated The product is supplied complete with an extra-large anode in magnesium alloy Guarantee year Page 42
TECHNICAL DATA AND DIMENSIONS D df BGM/BI STORAGE MULTIGAS WATER HEATER STAND ON INDUSTRIAL R H EG S G EG S R Cold water inlet Hot water outlet Gas inlet connection Water drain Recirculation Natural Gas On demand LPG (BGM/BI GPL) DIMENSIONS BGM/800/BI BGM/000/BI BGM/500/BI BGM/2000/BI D mm 960 960 20 20 H mm 2075 2405 2445 2960 df mm 80 80 80 80 G mm 070 070 285 285 - Ø 2 2 2 ½ 2 ½ EG Ø /2 /2 /2 /2 S - R Ø 2 2 2 ½ 2 ½ TECHNICAL DATA BGM/800/BI BGM/000/BI BGM/500/BI BGM/2000/BI Capacity L 800 000 500 2000 Storage tank Pmax bar 6 6 6 6 Heat capacity kw 47,4 53,3 80 80 Single drawn at 40 C () L 600 2000 3000 4000 Efficiency ΔT45 C (2) L/h 770 867 300 300 Burner surface m² 4,5 5,5 7,2 7,8 Consumption Natural Gas m³/h 5 5,6 8,4 8,4 Consumption LPG kg/h 3,7 4,2 6,3 6,3 Weight Kg 390 460 637 750 () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 43
TECHNICAL DATA AND DIMENSIONS D df BGMT/BI STORAGE MULTIGAS WATER HEATER STAND ON INDUSTRIAL - THERMO VERSION R MT H h2 RT EG S h G MT RT EG S R Cold water inlet Hot water outlet Thermo flow Thermo return Gas inlet connection Water drain Recirculation Natural Gas On demand LPG (BGMT/BI GPL) DIMENSIONS BGMT/800/BI BGMT/000/BI BGMT/500/BI BGMT/2000/BI D mm 960 960 20 20 H mm 2075 2405 2445 2960 df mm 80 80 80 80 G mm 070 070 285 285 h mm 745 745 780 780 h2 mm 600 900 900 400 - Ø 2 2 2 ½ 2 ½ EG Ø /2 /2 /2 /2 MT - RT Ø 2 2 2 2 S - R Ø 2 2 2 ½ 2 ½ TECHNICAL DATA BGMT/800/BI BGMT/000/BI BGMT/500/BI BGMT/2000/BI Capacity L 800 000 500 2000 Storage tank Pmax bar 6 6 6 6 Heat capacity kw 47,4 53,3 80 80 Single drawn at 40 C () L 600 2000 3000 4000 Efficiency ΔT45 C (2) L/h 770 867 300 300 Burner surface m² 4,5 5,5 7,2 7,8 Consumption Natural Gas m³/h 5 5,6 8,4 8,4 Consumption LPG kg/h 3,7 4,2 6,3 6,3 Exchanger surface m² 2 2,65 3,3 4,9 THERMO Exchanger efficiency ΔT45 C (3) L/h 533 706 880 306 EXCHANGER Weight Kg 460 552 788 980 () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 44
BGM/CS STORAGE MULTIGAS WATER HEATER SEALED CHAMBER DESCRIPTION This multigas water heater (pre-fitted for use with both LPG and methane) is designed for industrial users, apartment blocks, communities and homes with multiple services. With its ample sealed combustion chamber (from 6 to 0 flues), a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. BGM/CS brings businesses, apartment blocks and large communities a water heating efficiency of 87%, a value higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner is made in stainless steel, to guarantee maximum efficiency and safety over time. Designed from the outset with a double discharge, combustion fumes are expelled from the top by a fan, and the air intake at the bottom has a specific connector on the heater. In addition, the sealed combustion chamber eliminates the "chimney effect", which is the circulation of cold air through the outlet flue for fumes when the burner is turned off. Specific kits are available for conversion into a coaxial version. The heater is equipped with an electronic control unit, an electric gas valve and electronic ignition. The advantages of the BGM/CS model, available in several versions (from 200 to 590 litres, and also with thermo version), include the attentive preparation of materials and exclusive assembly methods, which guarantee the perfect application of protective resin finishes (vitreous enamel). The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Designed with a low coefficient of heat loss and high efficiency, with condensation evaporation in compliance with the DIN EN 89 standard Product with DVGW certification, guaranteeing high standards of efficiency and safety, in total respect of the environment On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stovefired at 220 C, after being suitably treated Electronic ignition with ionization flame detection Combustion, ignition and turn-off controls on electronic panel The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 2 years Page 45
TECHNICAL DATA AND DIMENSIONS 2 6 D Since 960 we have produced your hot water BGM/CS STORAGE MULTIGAS WATER HEATER SEALED CHAMBER R H 3 5 S EG 4 300 i 30 30 Air suction 2 Flue exhaust 3 Control panel EG Cold water inlet Hot water outlet Gas inlet connection 50 80 4 Solenoid gas valve 5 6 Electronic control panel Adjustable flue exhaust fan S R Water drain Recirculation Natural Gas On demand LPG (BGM/CS GPL) DIMENSIONS BGM20Q/CS BGM30Q/CS BGM40Q/CS BGM50Q/CS BGM60Q/CS D mm 550 650 660 750 760 H mm 620 75 2085 940 2265 i mm 40 40 40 40 40 - Ø 3/4" EG Ø 3/4" 3/4" 3/4" 3/4" 3/4" S Ø /2" /2" /2" /2" /2" R Ø 3/4 3/4" 3/4 Ø 00 00 00 00 00 2 Ø 80 80 80 80 80 TECHNICAL DATA BGM20Q/CS BGM30Q/CS BGM40Q/CS BGM50Q/CS BGM60Q/CS Capacity L 200 300 400 470 590 Storage tank Pmax bar 6 6 6 6 6 Heat capacity kw 4 23,2 23,2 29,5 29,5 Single drawn at 40 C () L 400 600 800 940 80 Efficiency ΔT45 C (2) L/h 226 378 378 472 472 Burner surface m²,,7 2,2 2,3 2,8 Consumption Natural Gas m³/h,48 2,45 2,45 3,2 3,2 Consumption LPG kg/h,0,83,83 2,32 2,32 Weight Kg 08 45 64 220 252 ERP BGM20Q/CS BGM30Q/CS BGM40Q/CS BGM50Q/CS BGM60Q/CS Energy class B B B C C Load profile XL XL XL XXL XXL () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 46
TECHNICAL DATA AND DIMENSIONS 2 6 D Since 960 we have produced your hot water BGM/T/CS STORAGE MULTIGAS WATER HEATER SEALED CHAMBER - THERMO VERSION R h2 5 MT H 3 h S EG 4 RT 300 i 30 30 Air suction 2 Flue exhaust Cold water inlet Hot water outlet 3 Control panel MT Thermo flow 50 80 4 Solenoid gas valve 5 6 Electronic control panel Adjustable flue exhaust fan RT EG S R Thermo return Gas inlet connection Water drain Recirculation Natural Gas On demand LPG (BGM/T/CS GPL) DIMENSIONS BGM/T/20Q/CS BGM/T/30Q/CS BGM/T/50Q/CS BGM/T/60Q/CS D mm 550 650 750 760 H mm 620 75 940 2265 h mm 405 420 495 495 h2 mm 390 490 790 890 i mm 40 40 40 40 - Ø 3/4" MT - RT Ø EG Ø 3/4" 3/4" 3/4" 3/4" S Ø /2" /2" /2" /2" R Ø 3/4 Ø 00 00 00 00 2 Ø 80 80 80 80 TECHNICAL DATA BGM/T/20Q/CS BGM/T/30Q/CS BGM/T/50Q/CS BGM/T/60Q/CS Capacity L 200 300 470 590 Storage tank Pmax bar 6 6 6 6 Heat capacity kw 4 23,2 29,5 29,5 Single drawn at 40 C () L 400 600 940 80 Efficiency ΔT45 C (2) L/h 226 378 472 472 Burner surface m²,,7 2,3 2,8 Consumption Natural Gas m³/h,48 2,45 3,2 3,2 Consumption LPG kg/h,0,83 2,32 2,32 Exchanger surface m² 0,77, 2,03 2,25 THERMO Exchanger efficiency ΔT45 C (3) L/h 205 296 54 600 EXCHANGER Weight Kg 22 65 256 292 ERP BGM/T/20Q/CS BGM/T/30Q/CS BGM/T/50Q/CS BGM/T/60Q/CS Energy class B B C C Load profile XL XL XXL XXL () Thermostat at 70 C. Water flow temperature 5 C (2) Primary water temperature 5 C (3) Heating fluid thermo 80 C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 47
EXAMPLES OF AIR DRAWING PIPES AND SMOKES DISCHARGE BGM/CS STORAGE MULTIGAS WATER HEATER SEALED CHAMBER L L L L SPLIT KIT LENGHT OF SMOKES DISCHARGE (L) MAX 6 Mt without elbow junction MIN Mt LOAD LOSS FOR EH QUARTER BEND = Mt LENGHT OF AIR DRAWING PIPES (L) MAX 6 Mt without elbow junction MIN Mt LOAD LOSS FOR EH QUARTER BEND = Mt L 600 PARALLEL SPLIT KIT LENGHT OF SMOKES DISCHARGE (L) MAX 5 Mt without elbow junction MIN Mt LOAD LOSS FOR EH QUARTER BEND = Mt LENGHT OF AIR DRAWING PIPES (L) MAX 5 Mt without elbow junction MIN Mt LOAD LOSS FOR EH QUARTER BEND = Mt L L COAXIAL KIT LENGHT OF SMOKES DISCHARGE (L) MAX 3 Mt without elbow junction MIN Mt LOAD LOSS FOR EH QUARTER BEND = Mt LENGHT OF AIR DRAWING PIPES (L) MAX 3 Mt without elbow junction MIN Mt LOAD LOSS FOR EH QUARTER BEND = Mt Page 48
HEAT PUMP WATER HEATERS AND TREATMENT UNITS BSMPC Wall hang heat pump water heater BSBPC Floor standing heat pump water heater BUTPC Heat pump treatment unit Page 49
BSMPC WALL HANG HEAT PUMP WATER HEATER DESCRIPTION This heat pump water heater is designed to exploit the heat of the air as an energy source for the heating of water. In this specific case, it allows much of the heat in the surrounding space to be recovered, thereby becoming an energy source for the production of hot water. Air is compressed inside the machine, where the greater pressure increases its temperature to values that can reach 90 C. In the condenser, made in a double layer of copper to ensure higher efficiency, this heat energy is transferred to the water, which can be heated up to about 60 C. When it passes through the expansion valve at the end of the cycle, the fluid returns to a state of low pressure, and is ready to start the thermodynamic cycle again. BSMPC is the wall-hung water heater that suits well to different applications, maintaining high range functionality. The advantages of this system, which is both ecological and economic, include easy operation, silent operation and low maintenance requirements. It has top performances for what concerns energy savings so that it is labelled with A+ class according to Erp classification which will become effective in 207. COMPT SIZE HIGH EFFICIENCY ROTARY COMPRESSOR ENVIRONMENTAL FRIENDLY GAS ANTI-LEGIONELLA CYCLE LOW NOISE EASY INSTALLATION GUARANTEE 5 YEARS Page 50
TECHNICAL DATA BSMPC WALL HANG HEAT PUMP WATER HEATER BSMPC 90 TECHNICAL DATA BSMPC 90 Capacity L 90 Number of tanks nr Average electrical power input Wel 20 Thermal power output Wth 005 Integrated heating element power Wel 200 Net weight (empty/loaded) kg 46 / 36 Maximum water pressure bar 7 Maximum air temperature C 43 Minimum air temperature C 4 Nominal air flow m³/h 30 Requested room value m³ 5 Electrical parameters V - Hz 230V - 50Hz Ingress protection rating Legionella prevention system (at 70 C) Modes Type of gas IPX4 automatic Auto Eco Boost R34a Gas quantity gr 530 Total heating time (according to EN 647)(*) hh:mm 05:30 Heating time in BOOST mode (*) hh:mm 02:25 Heating coil wrapped around the tank nr Energy class Load profile ERP BSMPC 90 A M (*) Inlet air temperature 20 C (5 C max), 20 C at the storage, heating of water from 0 C to 55 C. NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. Page 5
DIMENSIONS BSMPC WALL HANG HEAT PUMP WATER HEATER h H A D C B E A A2 S i AE F DIMENSIONS BSMPC 90 Ø /2" Ø /2" S Ø /2" A Ø mm 25 A2 Ø mm 25 A mm 248 B mm 542 C mm 259 D mm 550 E mm 87 F mm 280 H mm 392 h mm 652 i mm 30 A A2 S AE Cold water inlet Hot water outlet Air inlet Air outlet Condensate drain Power supply wire EXAMPLE OF WATER SUPPLY SYSTEM Heat pump Cold water inlet Hot water outlet 7-bar safety valve NOTICE. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 52
INSTALLATION The heat pump product range is designed to answer the needs of small, medium and big utilities, adapting to different living environments where the water heater can be installed. BSMPC is the water heater for indoor installation that recovers heat from air with positive temperatures from 4 C to 43 C. During the summer, the fresh air produced by the device can be used to create a pleasant heat reduction inside the installation room while during the winter the outlet air can be ducted outside. BSMPC WALL HANG HEAT PUMP WATER HEATER EXAMPLES OF INSTALLATION WINTER LENGTH OF CONNECTIONS AIR DISCHARGE MAX 8 Mt with elbow junction 90 MAX 6 Mt with 2 elbow junctions 90 Connection type A Connection type B SUMMER Outdoor Outdoor Page 53
BSBPC FLOOR STANDING HEAT PUMP WATER HEATER DESCRIPTION This heat pump water heater is designed to exploit the heat of the air as an energy source for the heating of water. In this specific case, it allows much of the heat in the surrounding space to be recovered, thereby becoming an energy source for the production of hot water. Air is compressed inside the machine, where the greater pressure increases its temperature to values that can reach 90 C. In the condenser, made in a double layer of copper to ensure higher efficiency, this heat energy is transferred to the water, which can be heated up to about 60 C. When it passes through the expansion valve at the end of the cycle, the fluid returns to a state of low pressure, and is ready to start the thermodynamic cycle again. BSBPC series is the range of floorstanding heat pump water heaters. With a distinctive design and different models, this series answers the most different needs concerning operating modes and connection to the net, thanks to the additional coils available in the versions. The advantages of this system, which is both ecological and economic, include easy operation, silent operation and low maintenance requirements. On demand for the cold areas it is also available a special version (L version). COMPT SIZE HIGH EFFICIENCY ROTARY COMPRESSOR ENVIRONMENTAL FRIENDLY GAS ANTI-LEGIONELLA CYCLE LOW NOISE EASY INSTALLATION GUARANTEE 5 YEARS Page 54
TECHNICAL DATA BSBPC FLOOR STANDING HEAT PUMP WATER HEATER BSBPC 60A BSBPC 200A BSBPC 200AS BSBPC 260A BSBPC 260AS BSBPC 260AST L L L XL XL XL 986 kwh/annum 986 kwh/annum 986 kwh/annum 929 kwh/annum 929 kwh/annum 929 kwh/annum 929 kwh/annum 929 kwh/annum 929 kwh/annum 384 kwh/annum 384 kwh/annum 384 kwh/annum 384 kwh/annum 384 kwh/annum 384 kwh/annum 384 kwh/annum 384 kwh/annum 384 kwh/annum 59 db 59 db 59 db 59 db 59 db 59 db 57 db 57 db 57 db 57 db 57 db 57 db BSBPC BSBPC BSBPC BSBPC BSBPC BSBPC TECHNICAL DATA 60A 200A 200AS 260A 260AS 260AST Capacity L 60 200 200 260 260 260 Average electrical power input Wel 370 370 370 370 370 370 Thermal power output Wth 600 600 600 600 600 600 Integrated heating element power Wel 500 500 500 500 500 500 Net weight (empty/loaded) kg 70 / 240 80 / 295 00 / 299 00 / 360 20 / 375 25 / 383 Maximum water pressure bar 7 7 7 7 7 7 Maximum air temperature C 43 43 43 43 43 43 Minimum air temperature C 4 4 4 4 4 4 Nominal air florw m³/h 350 350 350 350 350 350 Electrical parameters V - Hz 230V - 50Hz 230V - 50Hz 230V - 50Hz 230V - 50Hz 230V - 50Hz 230V - 50Hz Ingress protection rating IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 Legionella prevention system (at 70 C) automatic automatic automatic automatic automatic automatic Modes Auto Eco Boost Auto Eco Boost Auto Eco Boost Auto Eco Boost Auto Eco Boost Auto Eco Boost Type of gas R34a R34a R34a R34a R34a R34a Gas quantity gr 900 900 900 900 900 900 Total heating time (according to EN 647)(*) hh:mm 06:4 07:6 07:6 09:44 09:44 09:44 Heating coil wrapped around the tank nr Heating coil for solar panel nr - - - Additional heating coil nr - - - - - BSBPC BSBPC BSBPC BSBPC BSBPC BSBPC ERP 60A 200A 200AS 260A 260AS 260AST Energy class A A A A A A Load profile L L L XL XL XL (*) Inlet air temperature 20 C (5 C max), 20 C at the storage, heating of water from 0 C to 55 C. NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. Page 55
DIMENSIONS D2 Since 960 we have produced your hot water BSBPC FLOOR STANDING HEAT PUMP WATER HEATER H 3 2 R 2 h2 S 3 h D A A2 S R A Cold water inlet Hot water outlet Condensate drain Recirculation Air inlet 2 3 Coil for solar thermal power Coil for auxiliary heat source Probe immersion sleeve (only in models provided with it) A A2 Air outlet BSBPC BSBPC BSBPC BSBPC BSBPC BSBPC DIMENSIONS 60A 200A 200AS 260A 260AS 260AST Ø Ø S Ø /2" /2" /2" /2" /2" /2" R Ø 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" A Ø mm 60 60 60 60 60 60 A2 Ø mm 60 60 60 60 60 60 Ø ¼ ¼ ¼ ¼ ¼ ¼ 2 Ø ¼ ¼ ¼ ¼ ¼ ¼ 3 Ø /2" /2" /2" /2" /2" /2" D Ø mm 600 600 600 600 600 600 D2 Ø mm 650 650 650 650 650 650 H mm 504 74 74 2000 2000 2000 h mm 68 68 68 68 68 68 h2 mm 894 04 04 394 394 394 A mm 380 380 380 380 380 380 NOTICE. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 56
EXAMPLE OF WATER SUPPLY SYSTEM BSBPC FLOOR STANDING HEAT PUMP WATER HEATER WATER INLET PIPE 2 SHUT-OFF VALVE 3 AUTOMATIC THERMOSTAT MIXING EQUIPMENT 4 HEAT PUMP 5 RICIRCULATION PUMP 6 SPRING CHECK VALVE 7 HOT WATER OUTLET 8 SETY VALVE 9 INSPECTIONABLE END OF DISCHARGE PIPE 0 DRAIN TAP EXPANSION VESSEL INSTALLATION The heat pump product range is designed to answer the needs of small, medium and big utilities, adapting to different living environments where the water heater can be installed. BSBPC series is perfect for the technical room where converges with other systems for the utilization of renewable energy sources: solar thermal, photovoltaic, biomass or geothermal. This range is composed by different models according to the installation requirements of the thermal system. The standard models (A series) work with positive air taken and then released inside (or outside, depending on the season). L series models (for cold areas) instead take the heat from air with either positive or negative temperature and can therefore be installed with single or double duct. STANDARD MODELS (A SERIES) MODELS FOR COLD AREAS (L SERIES) Page 57
EXAMPLES OF INSTALLATION In the summer the outlet fresh air, with thermal load from 6.000 to 9.000 BTU, can be used to produce a pleasant heat reduction inside the installation room while during the winter it can be ducted and released outside. BSBPC FLOOR STANDING HEAT PUMP WATER HEATER WINTER SUMMER LENGTH OF CONNECTIONS AIR DISCHARGE MAX 8 Mt with elbow junction 90 MAX 6 Mt with 2 elbow junctions 90 PREPARATION OF THE INSTALLATION SITE MINIMUM SPE Outdoor X 650 X2 650 X3 200 Y 300 Page 58
REMOTE CONNECTIONS The water heater is configured to be connected to other remote systems, especially the photovoltaic and solar thermal systems. The user interface has two digital inputs that can control the heat pump functioning in order to optimize the performance of the solar thermal system and use the electric energy overproduction of the photovoltaic system to produce DHW even without any demand from the water circuit. In this case it is possible to transform electrical energy into thermal energy raising the water temperature up to the value set by the user (70 C default temperature). The S and ST models are provided with one or two additional coils that allow the connection to other thermal sources, such as the boiler or a geothermal source to maximize the connectivity of the thermal system and to allow a better energy management. BSBPC FLOOR STANDING HEAT PUMP WATER HEATER EXAMPLES OF REMOTE CONNECTIONS Example of connection between a photovoltaic panel and a BSBPC water heater. The inverter manages the electrical energy flow that feeds the water heater. Example of connection between a solar collector and a BSBPC water heater. The heat transferred by the sun heats the water inside the tank through the additional coil of the S and ST versions. Integration between an hybrid panel PV-T (photovoltaic and thermal) and a BSBPC water heater. The control electronics manages the electrical and thermal flows between panel and water heater. Solution available for models S and ST. Integration composed by a solar thermal collector, a heat generator (gas or biomass) and a BSBPC water heater with ST version. Page 59
BUTPC HEAT PUMP TREATMENT UNIT DESCRIPTION This heat pump treatment unit is designed to exploit the heat of the air as an energy source for the heating of water. In this specific case, it allows much of the heat in the surrounding space to be recovered, thereby becoming an energy source for the production of hot water. Air is compressed inside the machine, where the greater pressure increases its temperature to values that can reach 90 C. In the condenser, made in a double layer of copper to ensure higher efficiency, this heat energy is transferred to the water, which can be heated up to about 60 C. When it passes through the expansion valve at the end of the cycle, the fluid returns to a state of low pressure, and is ready to start the thermodynamic cycle again. BUTPC is the innovate unit to be combined with an external water storage for the renewal of the sanitary water heater, ideal for renovation projects. It is equipped with two temperature probes to be installed into the remote water storage. Furthermore, the electronic control of BUTPC is programmed to drive a circulation pump and an heating element (both external, not included). The advantages of this system, which is both ecological and economic, include easy operation, silent operation and low maintenance requirements. COMPT SIZE HIGH EFFICIENCY ROTARY COMPRESSOR ENVIRONMENTAL FRIENDLY GAS AUTO-DEFROSTING SYSTEM LOW NOISE EASY INSTALLATION GUARANTEE 5 YEARS Page 60
TECHNICAL DATA BUTPC HEAT PUMP TREATMENT UNIT BUTPC V XL BUTPC V2 XL 460 kwh/annum 460 kwh/annum 460 kwh/annum 49 kwh/annum 49 kwh/annum 49 kwh/annum 60 db 60 db 55 db 60 db TECHNICAL DATA BUTPC V BUTPC V2 Average electrical power input Wel 540 880 Thermal power output Wth 900 2900 Heating element power Wel 500 (not included) 500 (not included) Net weight kg 26 35 Maximum water pressure bar - - Maximum air temperature C 38 38 Minimum air temperature C -7-7 Nominal air florw m³/h 350/500 550/700 Electrical parameters V - Hz 230V - 50Hz 230V - 50Hz Ingress protection rating IPX4 IPX4 Legionella prevention system (at 70 C) automatic automatic Modes Auto Eco Boost Auto Eco Boost Type of gas R34a R34a Gas quantity gr 570 660 Total heating time (according to EN 647)(*) hh:mm 08:29 05:44 Condenser type Plate Plate Cycle inversion No No Circulation pump Not included Not included Temperature probes for remote tank N 2, included N 2, included ERP BUTPC V BUTPC V2 Energy class A A Load profile XL XL (*) Inlet air temperature 20 C (5 C max), 20 C at the storage, heating of water from 0 C to 55 C. Page 6
DIMENSIONS BUTPC HEAT PUMP TREATMENT UNIT D G E S F B Cold water inlet S Hot water outlet Condensate drain C A A2 Air inlet Air outlet A2 A A EXAMPLE OF WATER SUPPLY SYSTEM DIMENSIONS BUTPC V BUTPC V2 Ø 3/4" 3/4" Ø 3/4" 3/4" S Ø /2" /2" A Ø mm 60 60 A2 Ø mm 60 60 A mm 430 430 B mm 720 720 C mm 550 550 D mm 545 545 E mm 580 580 F mm 70 70 G mm 275 275 WATER INLET 2 SHUT-OFF VALVE 3 SETY VALVE 4 HYDRAULIC CIRCUIT EXPANSION VESSEL 5 AUTOMATIC MIXING VALVE 6 HOT WATER OUTLET 7 PRESSURE STABILISER 8 INSPECTABLE DRAIN COLLECTOR 9 RECIRCULATION PUMP 0 HEAT PUMP EXPANSION VESSEL (0,5/ L) TECHNICAL WATER CIRCUIT 2 AUTOMATIC AIR VENT VALVE 3 BOILER 4 NTC HIGHER PROBE (RED MARK) 5 NTC LOWER PROBE (BLUE MARK) 6 ELECTRICAL HEATING ELEMENT (IF PRESENT) 7 CONDENSATE DRAIN A TECHNICAL COLD WATER OUTLET B TECHNICAL HOT WATER INLET NOTICE. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 62
INSTALLATION The heat pump product range is designed to answer the needs of small, medium and big utilities, adapting to different living environments where the water heater can be installed. The external unity BUTPC can be connected to tanks with vertical installation and capacity up to 500 liters, provided with a coil with a minimum surface of m². Depending on the season, the outlet air can be ducted outside or spread inside the house creating a pleasant heat reduction. BUTPC HEAT PUMP TREATMENT UNIT PREPARATION OF THE INSTALLATION SITE MINIMUM SPE Boiler MODEL BUTPC V BUTPC V2 X 2000 mm 2000 mm X2 (min) 300 mm 300 mm X3 28 kg 36 kg EXAMPLES OF INSTALLATION LENGTH OF CONNECTIONS AIR DISCHARGE/AIR INTAKE MAX 8 Mt with elbow junction 90 MAX 6 Mt with 2 elbow junctions 90 INSTALLING A SINGLE CHANNEL INSTALLING DUAL CHANNEL REMOTE CONNECTIONS BUTPC can aslo be connected to other remote energy systems. The user interface has two digital inputs that can control the heat pump functioning in order to optimize the performance of the solar thermal system and use the electric energy overproduction of the photovoltaic system to produce DHW even without any demand from the water circuit. Page 63
BOILERS WITH DOUBLE WALLED EXCHANGER BDPO3R Insulated horizontal boiler with double walled 3 years Page 64
BDPO3R INSULATED HORIZONTAL BOILER WITH DOUBLE WALLED 3 YEARS DESCRIPTION This horizontal boiler has an internal cavity that transfers the thermal energy of the hot water provided by external sources, like a heating appliance or solar panels, to the water in the main tank, making extra supplies of hot water available. Available in seven versions (from 80 to 500 litres), this model has a variety of applications ranging from domestic to commercial applications. The advantages of the BDPO3R model include the large heat exchange surface of the cavity, which surrounds more than two-thirds of the hot water tank. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective resin finishes (polymerized at high temperatures), enhancing the quality of the final product. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect". For the models from 200 to 500 litres the insulation is in soft thick polyurethane (30 mm), finished externally in Skay pvc cover Housing in white-painted sheet metal for models up to 50 litres The exchanger can work with heated or solar water Teflon treatment tank The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 3 years Page 65
TECHNICAL DATA AND DIMENSIONS L L L2 L3 L6 L5 MT BDPO3R INSULATED HORIZONTAL BOILER WITH DOUBLE WALLED 3 YEARS D AN L7 L4 RT h G Cold water inlet Hot water outlet MT Thermo flow RT Thermo return AN Magnesium anode ¼ Sensor ¼ DIMENSIONS BDPO3R 80 BDPO3R 00 BDPO3R 25 BDPO3R 50 BDPO3R 200 BDPO3R 300 BDPO3R 500 D Ø 440 440 440 490 50 560 660 L mm 825 985 20 50 490 830 200 L mm 220 22,5 325 282,5 452,5 482,5 442,5 L2 mm 385 560 560 585 585 865 25 L3 mm 220 22,5 325 282,5 452,5 482,5 442,5 L4 mm 660 85 050 992 37 62 872 L5 mm 65 70 60 57 72 27 227 L6 mm 285 290 280 277 352 397 407 L7 mm 540 695 930 872 37 432 692 h mm 70 70 70 95 07,5 32,5 82,5 G mm 460 460 460 505 520 580 680 - Ø 3/4" 3/4" 3/4" ¼ ¼ ¼ ¼ MT - RT Ø ¼ ¼ ¼ ¼ ¼ ½ ½ TECHNICAL DATA BDPO3R 80 BDPO3R 00 BDPO3R 25 BDPO3R 50 BDPO3R 200 BDPO3R 300 BDPO3R 500 Capacity L 80 00 25 50 200 300 500 Storage tank Tmax C 95 95 95 95 95 95 95 Storage tank Pmax bar 6 6 6 6 6 6 6 Exchanger Pmax bar 3 3 3 3 3 3 3 Fluid heating flow L/h 480 660 000 000 400 2000 2900 Surface m² 0,4 0,55 0,86 0,9,7,68 2,42 Capacity L 4,9 6,7 0,5 4,2 20,3 30,3 Efficiency Kcal/h 4800 6600 0320 0800 4040 2060 29040 Efficiency ΔT45 C L/h 06 47 230 240 32 448 645 Weight Kg 38 46 5 6 73 00 59 THERMO EXCHANGER Heating fluid 80 C ERP BDPO3R 80 BDPO3R 00 BDPO3R 25 BDPO3R 50 BDPO3R 200 BDPO3R 300 BDPO3R 500 Energy class E E E NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 66
BOILERS WITH WELDED COIL BSSV Vertical boiler with welded coil BSSV PLUS Vertical boiler with welded coil Plus (for solar panels) B2SSV Vertical boiler with 2 welded coils B2SSV PLUS Vertical boiler with 2 welded coils Plus (for solar panels) BSSMV Vertical boiler with high power welded coil (for heat pump) Page 67
BSSV VERTICAL BOILER WITH WELDED COIL DESCRIPTION This vertical boiler with a fixed heat exchanger has an internal coil that transfers the thermal energy of the hot water provided by external sources, like a heating appliance or solar panels, to the water in the tank, making extra supplies of hot water available. Available in seven versions (from 50 to 000 litres), this model can provide the ideal solution for the hot water needs of a high number of users. The advantages of BSSV include its high efficiency, the result of the vertical position of the tank. In comparison to the horizontal position, the vertical position gives in fact a more concentrated stratification of heat, and therefore a greater conservation of thermal energy. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The scrupulous preparation of materials and exclusive assembly methods guarantee the perfect application of vitreous enamel finishes, enhancing the quality of the final product. For models up to 500 litres, insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect". For the 750-litre and 000-litre versions, insulation is in soft thick polyurethane (00 mm), finished externally in Skay pvc cover The exchanger can work with heated water or solar Glass lined tank Boilers up to 500 litres are supplied complete with a magnesium alloy anode. 750-litre and 000-litre boilers are supplied complete with an electronic anode Guarantee 5 years Page 68
TECHNICAL DATA AND DIMENSIONS BSSV 50-500 BSSV 750-000 BSSV VERTICAL BOILER WITH WELDED COIL Sensor Ø20 (BSSV 50 500) Sensor /2 (BSSV 750-000) 2 Recirculation 3 Sensor Ø20 (BSSV 50 500) Sensor /2 (BSSV 750-000) 4 Electrical heating resistance ½ 5 Thermometer /2 6 Magnesium anode ½ 7 Security vent valve ½ 8 Drainage 3/4 (BSSV 50 500) Drainage ½ (BSSV 750-000) AN Electronic anode /2" AS Solar flow RS Solar return FL Inspection flange Ø80 Cold water inlet (BSSV 50 500) Cold water inlet ¼ (BSSV 750-000) Hot water outlet (BSSV 50 500) Hot water outlet ¼ (BSSV 750-000) DIMENSIONS BSSV 50 BSSV 200 BSSV 300 BSSV 400 BSSV 500 BSSV 750 BSSV 000 D Ø 500 500 550 650 650 750 790 D2 Ø 600 600 650 750 750 950 990 Height mm 053 328 532 502 777 2055 2060 mm 32 32 38 43 43 237 243 mm 904 77 398 368 633 85 820 FL mm 323 323 358 376 376 374 380 RS mm 259 253 278 303 303 336 342 AS mm 559 703 798 763 848 94 077 TECHNICAL DATA BSSV 50 BSSV 200 BSSV 300 BSSV 400 BSSV 500 BSSV 750 BSSV 000 Capacity L 50 200 300 400 500 750 000 Storage tank Tmax C 95 95 95 95 95 95 95 Storage tank Pmax bar 6 6 6 6 6 6 6 Exchanger surface m² 0,6,0,4,5,8 2,4 3,0 Exchanger capacity L 4,0 7,0 9,0 9,5 2,0 5,9 9,8 Exchanger Pmax bar 0 0 0 0 0 0 0 Weight Kg 68 80 08 3 44 99 22 SOLAR EXCHANGER ERP BSSV 50 BSSV 200 BSSV 300 BSSV 400 BSSV 500 BSSV 750 BSSV 000 Energy class B B B C C C C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 69
EXAMPLE OF WATER SUPPLY SYSTEM BSSV VERTICAL BOILER WITH WELDED COIL FINE FILTER 2 SHUTOFF VALVE 3 PRESSURE-REDUCING VALVE 4 CHEK, FILLING AND DRAINING VALVE 5 BKFLOW PREVENTER 6 PRESSURE GAUGE 7 SETY VALVE WITH MEMBRAN 8 EXPANSION VESSEL 9 DOMESTIC WATER MIXER 0 SHUTOFF VALVE WITH DRAINAGE CIRCULATION PUMP WITH TIMER EXAMPLE OF REMOTE CONNECTIONS Page 70
B2SSV VERTICAL BOILER WITH 2 WELDED COILS DESCRIPTION This vertical boiler with two welded heat exchangers has a pair of internal coils that transfer the thermal energy of the hot water provided by external sources, like a heating appliance or solar panels, to the water in the tank, making extra supplies of hot water available. Available in six versions (from 200 to 000 litres), this model can provide the ideal solution for the hot water needs of a high number of users. The advantages of B2SSV include its high efficiency, the result of the vertical position of the tank. In comparison to the horizontal position, the vertical position gives in fact a more concentrated stratification of heat, and therefore a greater conservation of thermal energy. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The scrupulous preparation of materials and exclusive assembly methods guarantee the perfect application of vitreous enamel finishes, enhancing the quality of the final product. For models up to 500 litres, insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect". For the 750-litre and 000-litre versions, insulation is in soft thick polyurethane (00 mm), finished externally in Skay pvc cover The exchangers can work with heated water or solar Glass lined tank Boilers up to 500 litres are supplied complete with a magnesium alloy anode. 750-litre and 000-litre boilers are supplied complete with an electronic anode Guarantee 5 years Page 7
TECHNICAL DATA AND DIMENSIONS B2SSV 200-500 B2SSV 750-000 B2SSV VERTICAL BOILER WITH 2 WELDED COILS Sensor Ø20 (B2SSV 200 500) Sensor /2 (B2SSV 750-000) 2 Recirculation 3 Sensor Ø20 (B2SSV 200 500) Sensor /2 (B2SSV 750-000) 4 Electrical heating resistance ½ 5 Thermometer /2 6 Magnesium anode ½ 7 Security vent valve ½ 8 Drainage 3/4 (B2SSV 200 500) Drainage ½ (B2SSV 750-000) AN Electronic anode /2" AS Solar flow RS Solar return AS2 Thermo flow RS2 Thermo return FL Inspection flange Ø80 Cold water inlet (B2SSV 200 500) Cold water inlet ¼ (B2SSV 750-000) Hot water outlet (B2SSV 200 500) Hot water outlet ¼ (B2SSV 750-000) DIMENSIONS B2SSV 200 B2SSV 300 B2SSV 400 B2SSV 500 B2SSV 750 B2SSV 000 D Ø 500 550 650 650 750 790 D2 Ø 600 650 750 750 950 990 Height mm 328 532 502 777 2055 2060 mm 32 38 43 43 237 243 mm 77 398 368 633 85 820 FL mm 323 358 376 376 374 380 RS mm 253 278 303 303 336 342 AS mm 703 798 763 848 94 077 RS2 mm 80 898 903 098 266 82 AS2 mm 050 228 83 420 76 722 TECHNICAL DATA B2SSV 200 B2SSV 300 B2SSV 400 B2SSV 500 B2SSV 750 B2SSV 000 Capacity L 200 300 400 500 750 000 Storage tank Tmax C 95 95 95 95 95 95 Storage tank Pmax bar 6 6 6 6 6 6 Higher exchanger surface m² 0,6,0,0,2,8 2,4 Higher exchanger capacity L 4,0 7,0 7,0 8,0,9 5,9 Higher exchanger Pmax bar 0 0 0 0 0 0 Lower exchanger surface m²,0,4,5,8 2,4 3,0 Lower exchanger capacity L 7,0 9,0 9,5 2,0 5,9 9,8 Lower exchanger Pmax bar 0 0 0 0 0 0 Weight Kg 90 24 46 60 227 252 ERP B2SSV 200 B2SSV 300 B2SSV 400 B2SSV 500 B2SSV 750 B2SSV 000 Energy class B B C C C C HIGHER THERMO EXCHANGER LOWER SOLAR EXCHANGER NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 72
EXAMPLE OF WATER SUPPLY SYSTEM B2SSV VERTICAL BOILER WITH 2 WELDED COILS FINE FILTER 2 SHUTOFF VALVE 3 PRESSURE-REDUCING VALVE 4 CHEK, FILLING AND DRAINING VALVE 5 BKFLOW PREVENTER 6 PRESSURE GAUGE 7 SETY VALVE WITH MEMBRAN 8 EXPANSION VESSEL 9 DOMESTIC WATER MIXER 0 SHUTOFF VALVE WITH DRAINAGE CIRCULATION PUMP WITH TIMER EXAMPLE OF REMOTE CONNECTIONS Page 73
BSSV PLUS VERTICAL BOILER WITH WELDED COIL PLUS (FOR SOLAR PANELS) DESCRIPTION This vertical boiler with a fixed heat exchanger has an internal coil that transfers the thermal energy of the hot water provided by external sources, and in particular by solar panels, to the water in the tank, making extra supplies of hot water available. Available in four versions (from 200 to 500 litres), this model can provide the ideal solution for the hot water needs of a high number of users. The advantages of BSSV PLUS include its high efficiency, the result of the vertical position of the tank. In comparison to the horizontal position, the vertical position gives in fact a more concentrated stratification of heat, and therefore a greater conservation of thermal energy. This boiler also has a solar electronic control unit and an electric pump that communicate with the solar panel using a sensor, allowing the circulation of hot water in the heat exchanger to be optimized. The BSSV PLUS pre-fitted for the connection of a solar expansion tank if desired. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The scrupulous preparation of materials and exclusive assembly methods guarantee the perfect application of vitreous enamel finishes, enhancing the quality of the final product. Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The exchanger can work with heated water or solar Glass lined tank The boiler is equipped with a pre-mounted two lines solar station and an electrically connected solar control unit Furthermore the boiler provides the possibility for fixing the solar expansion vessel The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 5 years (boiler) and 2 years (control unit and solar assembly) Page 74
TECHNICAL DATA AND DIMENSIONS BSSV PLUS VERTICAL BOILER WITH WELDED COIL PLUS (FOR SOLAR PANELS) Sensor socket Ø20 2 Recirculation 3 Sensor socket Ø20 4 Electrical heating resistance ½ 5 Connection for thermometer /2 6 Magnesium anode ½ 7 Drainage 3/4 AS Solar flow RS Solar return FL FVE Inspection flange Ø80 Fixing for expansion kit 2 x M8 Cold water inlet Hot water outlet DIMENSIONS BSSV PLUS 200 BSSV PLUS 300 BSSV PLUS 400 BSSV PLUS 500 D Ø 500 550 650 650 D2 Ø 600 650 750 750 Height mm 328 532 502 777 mm 32 38 43 43 mm 77 398 368 633 FL mm 323 358 377 377 RS mm 676 768 753 893 AS mm 676 768 753 893 TECHNICAL DATA BSSV PLUS 200 BSSV PLUS 300 BSSV PLUS 400 BSSV PLUS 500 Capacity L 200 300 400 500 Storage tank Tmax C 95 95 95 95 Storage tank Pmax bar 6 6 6 6 Exchanger surface m²,0,4,5,8 Exchanger capacity L 7,0 9,0 9,5 2,0 Exchanger Pmax bar 0 0 0 0 Weight Kg 85 3 36 49 SOLAR EXCHANGER ERP BSSV PLUS 200 BSSV PLUS 300 BSSV PLUS 400 BSSV PLUS 500 Energy class B B C C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 75
EXAMPLE OF WATER SUPPLY SYSTEM BSSV PLUS VERTICAL BOILER WITH WELDED COIL PLUS (FOR SOLAR PANELS) FINE FILTER 2 SHUTOFF VALVE 3 PRESSURE-REDUCING VALVE 4 CHEK, FILLING AND DRAINING VALVE 5 BKFLOW PREVENTER 6 PRESSURE GAUGE 7 SETY VALVE WITH MEMBRAN 8 EXPANSION VESSEL 9 DOMESTIC WATER MIXER 0 SHUTOFF VALVE WITH DRAINAGE CIRCULATION PUMP WITH TIMER EXAMPLE OF REMOTE CONNECTIONS Page 76
B2SSV PLUS VERTICAL BOILER WITH 2 WELDED COILS PLUS (FOR SOLAR PANELS) DESCRIPTION This vertical boiler with two welded heat exchangers has a pair of internal coils that transfer the thermal energy of the hot water provided by secondary sources, and in particular, for this model, by solar panels, to the water in the tank, making extra supplies of hot water available. Available in four versions (from 200 to 500 litres), this model can provide the ideal solution for the hot water needs of domestic and small commercial users. The advantages of B2SSV Plus include its high efficiency, the result of the vertical position of the tank. In comparison to the horizontal position, the vertical position gives in fact a more concentrated stratification of heat, and therefore a greater conservation of thermal energy. This boiler has a solar electronic control unit and an electric pump that communicate with the solar panel using a sensor, allowing the circulation of hot water in the heat exchanger to be optimized. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The scrupulous preparation of materials and exclusive assembly methods guarantee the perfect application of vitreous enamel finishes, enhancing the quality of the final product. Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The exchangers can work with heated water or solar Glass lined tank The boiler is equipped with a pre-mounted two lines solar station and an electrically connected solar control unit Furthermore the boiler provides the possibility for fixing the solar expansion vessel The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 5 years (boiler) and 2 years (control unit and solar assembly) Page 77
TECHNICAL DATA AND DIMENSIONS B2SSV PLUS VERTICAL BOILER WITH 2 WELDED COILS PLUS (FOR SOLAR PANELS) Sensor socket Ø20 2 Recirculation 3 Sensor socket Ø20 4 Electrical heating resistance ½ 5 Connection for thermometer /2 6 Magnesium anode ½ 7 Drainage 3/4 AS Solar flow RS Solar return AS2 Thermo flow RS2 Thermo return FL FVE Flange inspection Ø80 Fixing for expansion kit 2 x M8 Cold water inlet Hot water outlet DIMENSIONS B2SSV PLUS 200 B2SSV PLUS 300 B2SSV PLUS 400 B2SSV PLUS 500 D Ø 500 550 650 650 D2 Ø 600 650 750 750 Height mm 328 532 502 777 mm 32 38 43 43 mm 77 398 368 633 FL mm 323 358 376 376 RS mm 676 768 753 893 AS mm 676 768 753 893 RS2 mm 80 898 903 098 AS2 mm 050 228 83 420 TECHNICAL DATA B2SSV PLUS 200 B2SSV PLUS 300 B2SSV PLUS 400 B2SSV PLUS 500 Capacity L 200 300 400 500 Storage tank Tmax C 95 95 95 95 Storage tank Pmax bar 6 6 6 6 Higher exchanger surface m² 0,6,0,0,2 Higher exchanger capacity L 4,0 7,0 7,0 8,0 Higher exchanger Pmax bar 0 0 0 0 Lower exchanger surface m²,0,4,5,8 Lower exchanger capacity L 7,0 9,0 9,5 2,0 Lower exchanger Pmax bar 0 0 0 0 Weight Kg 95 29 5 65 HIGHER THERMO EXCHANGER LOWER SOLAR EXCHANGER ERP B2SSV PLUS 200 B2SSV PLUS 300 B2SSV PLUS 400 B2SSV PLUS 500 Energy class B B C C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 78
EXAMPLE OF WATER SUPPLY SYSTEM B2SSV PLUS VERTICAL BOILER WITH 2 WELDED COILS PLUS (FOR SOLAR PANELS) FINE FILTER 2 SHUTOFF VALVE 3 PRESSURE-REDUCING VALVE 4 CHEK, FILLING AND DRAINING VALVE 5 BKFLOW PREVENTER 6 PRESSURE GAUGE 7 SETY VALVE WITH MEMBRAN 8 EXPANSION VESSEL 9 DOMESTIC WATER MIXER 0 SHUTOFF VALVE WITH DRAINAGE CIRCULATION PUMP WITH TIMER EXAMPLE OF REMOTE CONNECTIONS Page 79
BSSMV VERTICAL BOILER WITH HIGH POWER WELDED COIL (FOR HEAT PUMP) DESCRIPTION This vertical boiler with a welded heat exchanger has an internal coil that transfers the thermal energy of the hot water provided by external sources, like a heating appliance, solar panels or a heat pump, to the water in the tank, making extra supplies of hot water available. Available in four versions (from 200 to 500 litres), this model can provide the ideal solution for the hot water needs of a high number of users. The advantages of BSSMV include its high efficiency, the result of the vertical position of the tank. In comparison to the horizontal position, the vertical position gives in fact a more concentrated stratification of heat, and therefore a greater conservation of thermal energy. One of the important technological components is the coil, made with a special oval crosssection to increase turbulence and ensure high-efficiency heat exchange. The vast area of its heat-exchange surface makes it possible to produce large quantities of water even at low temperatures. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The scrupulous preparation of materials and exclusive assembly methods guarantee the perfect application of vitreous enamel finishes, enhancing the quality of the final product. Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" The exchangers can work with heated water or solar Glass lined tank The product is supplied complete with an extra-large anode in magnesium alloy Guarantee 5 years Page 80
TECHNICAL DATA AND DIMENSIONS BSSMV VERTICAL BOILER WITH HIGH POWER WELDED COIL (FOR HEAT PUMP) Sensor Ø20 2 Recirculation 3 Sensor Ø20 4 Electrical heating resistance ½ 5 Thermometer /2" 6 Magnesium anode ½ 7 Drainage 3/4 AS2 Thermo flow RS2 Thermo return FL Flange inspection Ø80 Cold water inlet Hot water outlet DIMENSIONS BSSMV 200 BSSMV 300 BSSMV 400 BSSMV 500 D Ø 500 550 650 650 D2 Ø 600 650 750 750 Height mm 328 532 502 777 mm 32 38 43 43 mm 77 398 368 633 FL mm 323 358 376 376 RS2 mm 253 278 303 303 AS2 mm 050 228 83 386 TECHNICAL DATA BSSMV 200 BSSMV 300 BSSMV 400 BSSMV 500 Capacity L 200 300 400 500 Storage tank Tmax C 95 95 95 95 Storage tank Pmax bar 6 6 6 6 Exchanger surface m² 2,8 3,7 4,7 5,8 Exchanger capacity L 4,0 8,0 30,0 37,0 Exchanger Pmax bar 0 0 0 0 Weight Kg 0 35 65 98 THERMO EXCHANGER ERP BSSMV 200 BSSMV 300 BSSMV 400 BSSMV 500 Energy class B B C C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 8
EXAMPLE OF WATER SUPPLY SYSTEM BSSMV VERTICAL BOILER WITH HIGH POWER WELDED COIL (FOR HEAT PUMP) FINE FILTER 2 SHUTOFF VALVE 3 PRESSURE-REDUCING VALVE 4 CHEK, FILLING AND DRAINING VALVE 5 BKFLOW PREVENTER 6 PRESSURE GAUGE 7 SETY VALVE WITH MEMBRAN 8 EXPANSION VESSEL 9 DOMESTIC WATER MIXER 0 SHUTOFF VALVE WITH DRAINAGE CIRCULATION PUMP WITH TIMER EXAMPLE OF REMOTE CONNECTIONS Page 82
TANKS SPUSV Floor standing vertical tank (with coil) Puffer SPUV Floor standing vertical tank (no coil) Puffer SAR Tank for cooled and hot water Page 83
SPUSV FLOOR STANDING VERTICAL TANK (WITH COIL) PUFFER" DESCRIPTION This tank is designed to supply a reserve of heating water to support secondary sources, such as appliances fired with gas, oil or wood, kitchen ranges, fireplaces and other sources of secondary energy. The tank is fitted with a fixed welded-coil heat exchanger for the use of water from solar panels. Available in several versions (from 300 to 2000 litres), this model is guaranteed for operating pressures of 3 bar. The tank, made in thick sheet metal, is rough-finished internally and treated externally with rust-resistant paint. For models up to 500 litres, insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect". For the models from 800 to 2000 litres, insulation is in soft thick polyurethane (00 mm), finished externally in Skay pvc cover The exchanger can work with heated water or solar Steel tank with any internal anti-corrosion treatment with external protection paint only Guarantee 5 years Page 84
TECHNICAL DATA AND DIMENSIONS SPUSV FLOOR STANDING VERTICAL TANK (WITH COIL) PUFFER Boiler flow ½ 2 Heating system flow ½ 3 Free disposal ½ 4 Return of heating system ½ 5 Heating flow high temperature ½ 6 Heating flow low temperature ½ 7 Gas, fuel or pellet boiler return ½ 8 Wood boiler return ½ SD Sensor for heating and solar systems /2 AS Solar flow RS Solar return DIMENSIONS SPUSV 300 SPUSV 500 SPUSV 800 SPUSV 000 SPUSV 250 SPUSV 500 SPUSV 2000 D Ø 550 650 790 790 950 000 00 D2 Ø 650 750 990 990 50 200 300 Height mm 357 637 760 2090 2060 2200 2420 RS mm 20 2 256 300 300 350 325 AS mm 660 72 80 970 970 000 05 TECHNICAL DATA SPUSV 300 SPUSV 500 SPUSV 800 SPUSV 000 SPUSV 250 SPUSV 500 SPUSV 2000 Capacity L 300 500 800 000 250 500 2000 Storage tank Tmax C 95 95 95 95 95 95 95 Storage tank Pmax bar 3 3 3 3 3 3 3 Exchanger surface m²,2,8 2,4 3,0 3,0 3,6 4,2 Exchanger capacity L 7,9,9 5,9 9,8 9,8 23,7 27,7 Exchanger Pmax bar 0 0 0 0 0 0 0 Weight Kg 73 03 30 56 89 20 278 SOLAR EXCHANGER ERP SPUSV 300 SPUSV 500 SPUSV 800 SPUSV 000 SPUSV 250 SPUSV 500 SPUSV 2000 Energy class B C C C C C C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 85
SPUV FLOOR STANDING VERTICAL TANK (NO COIL) PUFFER DESCRIPTION This tank is designed to supply a reserve of heating water to support secondary sources, such as appliances fired with gas, oil or wood, kitchen ranges, fireplaces and other sources of secondary energy. Available in several versions (from 300 to 2000 litres), this model is guaranteed for operating pressures of 3 bar. The tank, made in thick sheet metal, is rough-finished internally and treated externally with rust-resistant paint. For models up to 500 litres, insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect". For the models from 800 to 2000 litres, insulation is in soft thick polyurethane (00 mm), finished externally in Skay pvc cover Steel tank with any internal anti-corrosion treatment with external protection paint only Guarantee 5 years Page 86
TECHNICAL DATA AND DIMENSIONS SPUV FLOOR STANDING VERTICAL TANK (NO COIL) PUFFER Boiler flow ½ 2 Heating system flow ½ 3 Free disposal ½ 4 Return of heating system ½ 5 Heating flow high temperature ½ 6 Heating flow low temperature ½ 7 Gas, fuel or pellet boiler return ½ 8 Wood boiler return ½ SD Sensor for heating system /2 DIMENSIONS SPUV 300 SPUV 500 SPUV 800 SPUV 000 SPUV 250 SPUV 500 SPUV 2000 D Ø 550 650 790 790 950 000 00 D2 Ø 650 750 990 990 50 200 300 Height mm 357 637 760 2090 2060 2200 2420 TECHNICAL DATA SPUV 300 SPUV 500 SPUV 800 SPUV 000 SPUV 250 SPUV 500 SPUV 2000 Capacity L 300 500 800 000 250 500 2000 Storage tank Tmax C 95 95 95 95 95 95 95 Storage tank Pmax bar 3 3 3 3 3 3 3 Weight Kg 57 79 97 4 46 62 225 ERP SPUV 300 SPUV 500 SPUV 800 SPUV 000 SPUV 250 SPUV 500 SPUV 2000 Energy class B C C C C C C NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice. Page 87
SAR TANK FOR COOLED AND HOT WATER DESCRIPTION This tank is designed to provide a reserve of cooled water to support secondary sources, such as an air-conditioning system, but it can also be used to store hot water for sanitary purposes. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Exclusive pressing and assembly methods and attentive preliminary treatments of all our tanks ensure that galvanization is carried out accurately. Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect" External finishes are available in Skay pvc cover (SAR/SKAY version) or aluminium plate cover (SAR/AL version) Galvanized steel tank Guarantee 2 years Page 88