BREATHING AIR HOSE AND FITTINGS 3/16 ID Custom hose assemblies made to order specify lengths and end configurations AVAILABLE ONLY HERE 7000 PSI HOSE 7000 PSI (4:1 safety factor) Exceeds safety standards All assemblies pre-assembled Hose ends available JIC, Pipe, Pipe Swivel, ORB various sizes 6000 PSI (4:1 safety factor) Also available in 1/4 ID and 3/8 ID TWIN-LINE HYDRAULIC HOSE AND FITTINGS 1/4 ID Need replacement hose for your rescue equipment? Custom hose assemblies made to order specify lengths and end configurations All assemblies pre-assembled 5000 PSI (4:1 safety factor); Colors available: Blue, Green, Yellow and Orange Hose ends JIC, Pipe, Pipe Swivel, ORB various sizes
LOW PRESSURE HOSE AND FITTINGS (No clamps or sleeves needed) Available in bulk or hose assemblies (made to order) Pushlok Hose 350 PSI Colors avail. Red, Blue, Green, Yellow, Black and Grey Sizes avail. 1/4 ID, 3/8 ID, 1/2" ID Hose Ends available JIC, Pipe, Pipe Swivel, Quick Disconnect, Hose Menders, etc. various sizes and configurations. TUBE FITTINGS AND TUBING Nylon Tubing - 250 PSI Sizes avail.: 1/8 OD and 1/4 OD 250 PSI Colors avail.: Black and White Polyethylene Tubing - 120 PSI Sizes avail.: 1/4 OD 120 PSI Colors avail.: Black and White Also available Stainless Steel Tubing & Fittings.
TUBE FITTINGS AND TUBING - CONTINUED Prestolok Fittings (push to connect) Up to 300 PSI Various sizes and configurations available HIGH PRESSURE FITTINGS Pipe Fittings Various sizes Flare Fittings (JIC) Various sizes
HIGH PRESSURE FITTINGS - CONTINUED Compression Fittings Various sizes LOW AND HIGH PRESSURE FITTINGS Quick Disconnects Various sizes OTHER PARKER PRODUCTS Parker O-rings Metric & Standard O-Lube and Super O-Lube Electric Actuator Low Pressure Ball Valves
LOW PRESSURE BALL VALVES, HIGH PRESSURE BALL VALVES AND KITS ZANDER Air Treatment Systems - SEE BAUER INDUSTRIAL section. High Quality Purification Solutions a solution for every contaminant Parker ZANDER specializes in purification and separation technologies where compressed air and gas purity, product quality, technological excellence and global support are paramount. Parker ZANDER designs and manufactures compressed air treatment products and ancillary equipment for many key industries where ease of integration, low cost of ownership and energy savings can make a measurable difference. In these times of increasing energy costs, an efficient and cost effective manufacturing process is a major factor in maintaining the profitability and growth of your business. All Parker ZANDER products are designed to minimize the use of compressed air and electricity in their operation and to reduce the operational costs of the compressor by minimizing pressure loss significantly. Equipment with a low purchase cost may turn out to be a poor investment in the long term. By guaranteeing air quality and ensuring energy consumption is kept to a minimum, Parker ZANDER purification products can reduce the total cost of ownership and help improve profitability through improved manufacturing efficiencies. Contact Information: Parker Hannifin ZANDER North America Sales Company North Carolina, USA Tel: (678) 924-1000 Toll Free: 888-5-ZANDER Fax: (678) 924-1111 Ontario, Canada Tel: (905) 820-7146 Toll Free: 1-888-342-2623 Fax: (905) 820-5463 Solutions: Benefits: Compressed Air & Gas Filtration Air Quality Sterile & Particle-Free Filtration Energy Efficiency Culinary Steam Filtration Low Lifetime Costs Water Separators Reduced CO2 Emissions Refrigeration Air Dryers Modular & Twin Tower Adsorption Air Dryers Condensate & Waste Water Technology Breathing Air Purification After Sales Service www.zanderusa.com arcticstar plus Refrigeration Dryers (265-6000 scfm) High Pressure Dryer ecodry HDK-MTmultitronic with High Pressure Microfilters ENGINEERING YOUR SUCCESS. www.zanderusa.com