w w w. p r o f r o i d. c o m compact TRANSCRITICAL CO 2 BOOSTER RACK Cooling capacity LT: from 2 to 130 kw Cooling capacity MT: from 20 to 300 kw
compact Refrigeration Rack Transcritical CO 2 booster Electrical cabinet delivered wired and mounted. Energy saving: Frequency converter on MT and LT compressor (option). Emergency condensing unit integrated. Suction accumulator on negative rack (option). Energy saving: Heat recovery module with several options available. A CONCEPTION BASED ON ENVIRONMENTAL EFFICIENCY: The new range of refrigeration Rack MiniCO 2 compact uses the natural fluid carbon dioxide (CO 2 ) to provide durable and energy efficient refrigeration solutions. Specifically designed for the supermarkets and discounters, the MiniCO 2 compact system covers a wide range of cooling capacities. In temperate climates, the MiniCO 2 compact demonstrates up to 10% of energy savings compared with the traditional HFC refrigeration systems, leading attractive life cycle costs and a short period of return on investment. The CO 2 is the neutral refrigerant by excellence; it has a minimal global warming potential (GWP) for the planet, and a zero Ozone Depletion Potential (ODP). He is completely compatible with the F-Gas regulation. TECHNICAL CONCEPT: - Positive and negative racks stacked together on one main frame. - From 2 to 6 positive compressors: - 20 to 300 kw. - From 1 to 4 negative compressors: - 2 to 130 kw. - Pressure design: 25,45, 120 bar. - Active oil separation system. - Multiple vertical liquid receivers. - Integrated electrical cabinet including the control and protection of the Gascooler. - Control via dedicated automation, in open protocol. - Frequency inverter on positive compressor (standard) and negative (option). - Emergency condensing unit, factory mounted. - Heat recovery module integrated (option). PRODUCT BENEFITS: - Safe running. - Energy optimization. - Customization / adaptability. - Machine with PED compliance, risk category III. - Small footprint. Adaptability: Electrical cabinet with customized user connections. Semi-automatic backup running mode. Access to components from the front face. Oil separator and oil receiver. Double filter drier line (option). Specific control dedicated to transcritical CO 2 applications, with algorithm for efficiency ratio optimization. Multiple receivers PED Cat III or IV, from 66 liters to 2 x 198 liters. INSTALLATION SUTIONS: - 100% natural fluid CO 2, compatible F-GAS. - Heating and sanitary hot water production. - Energy saving. - Adapted for machine rooms with small dimensions. - Easy maintenance. 800 mm 4 500 mm Small footprint: Positive 300 kw and negative 150 kw in 900/4000 mm on the floor. 4 500 mm with heat recovery.
compact Options for better environmental efficiency. THE ECO-COMPRESSOR. Economizer cycle: Addition of a complementary compressor operating as economizer. Reduction in the compressors size. Better efficiency of the gas compression in medium pressure: ~30%. COP improvement: ~15%. HEAT RECOVERY MOUNTED AT THE RACK DISCHARGE: The CO 2 has excellent properties, particularly a high temperature of discharged gas, allowing to recover more energy at higher temperatures, and this on a regular basis. These characteristics allow to combine simultaneously the production of heating water and hot sanitary water through several heat exchangers. Various configurations are possible with or without gas cooler bypass and always equipped with a set of anti-boiling bypass valves. Directly mounted on the rack, the heat recovery module is connected to the refrigerant circuit, and electrically wired. Possibility to add pumps and energy meter (options). Controlled valves Sanitary Hot Water exchanger Water heating exchangers FREQUENCY INVERTER: The frequency inverter is delivered wired on the MT rack and optionally on the LT rack to allow an energy optimization by precise adjustment of the refrigeration capacity to the needs of display cabinets and other cooling devices of the store. These guarantee a flexible running of the rack during under load period (winter) by reducing the Startup/shutdown cycles of the compressors. They also allow to bear the peaks demand (summer) while using a compressor of smaller size (functioning in over-frequency). Frequency inverter LT rack (option) Frequency inverter MT rack
compact Range of Booster racks with modular design able to receive, on a single frame, a combination of positive racks from 3 to 6 compressors, and negative racks from 1 to 4 compressors, in predefined type formats: 3+1/2, 4+3, 5+3/4 and 6+3/4. You will find in the table below some examples of combinations with their minimum and maximum capacities. Mini combination 3 + 2 Maxi combination Number of negative compressors 1 2 2CSL6K Type of negative compressors 2MSL07K + 4CSL12K Capacity of negative compressors (1) kw 3 66 Number of positive compressors 3 3 Type of positive compressors 4PTC6K 4CTC30K Total capacity of positive compressors (2) kw 22 156 Gas cooler heat rejection capacity kw 37 260 Suction diameter negative rack inch "7/8 1"3/8 Suction diameter positive rack inch 1"3/8 1"5/8 Gas cooler outlet diameter inch "7/8 1"3/8 Liquid line outlet diameter inch "7/8 1"3/8 Receiver volume dm3 66 198 Sound power Lwa 85 89 LT compressor intensity Imax 2,5 41 MT compressor intensity Imax 40 234 Pressure 25/45/45/120 Length (mm) 2130 Length (with option heat recovery) (mm) + 350 + 500 Width (mm) 900 Height (mm) 2100 (1) -32 C /-10 C. (2) -10 C /+36 C outside (negative heat rejection not deducted) Mini combination 6+3/4 Maxi combination Number of negative compressors 3 4 2x2CSL6K Type of negative compressors 2MSL07K + 2x4CSL12K Capacity of negative compressors (1) kw 9 134 Number of positive compressors 6 6 Type of positive compressors 4FTC20K 4CTC30K Total capacity of positive compressors (2) kw 144 303 Gas cooler heat rejection capacity kw 240 504 Suction diameter negative rack inch "7/8 2"1/8 Suction diameter positive rack inch 1"5/8 2"1/8 Gas cooler outlet diameter inch 1"3/8 1"5/8 Liquid line outlet diameter inch 1"3/8 1"5/8 Receiver volume dm3 2x146 2x198 Sound power Lwa 91 92 LT compressor intensity Imax 7.5 81.0 MT compressor intensity Imax 283 422 Pressure 25/45/45/120 Length (mm) 4028 Length (with option heat recovery) (mm) + 350 + 500 Width (mm) 900 Height (mm) 2100
Useful Innovation A CO 2 range serving you safely MiniCO 2 outdoor with casing CO 2 transcritical housed condensing unit - Monobloc unit: - No high pressure connection 120 bar to be made on site. - Full test of the machine realized at the factory. - Machine delivered with electrical cabinet, controls, sensors and probes mounted, all the electrical connections tested in the factory. GasCO 2 A range of CO 2 gascoolers from 10 to 1000 kw, with the GasCO 2 Soprano, Alto, and Tenor. - Environmental efficiency: EC fans in standard. - Security: unit factory tested at 130 bar. - Robustness: Stainless steel collectors and pipes with special alloy. FlexiCO 2 - CO 2 subcritical low temperature rack from 6 to 147 kw. - Latest generation of CO 2 compressor "Octagone SL" with high COP. - Cascade plate heat exchanger equipped with an electronic expansion valve. - Liquid receiver located upstream to protect the cascade exchanger. - Electronic oil level controller. - Electrical cabinet with front access. CombiCO 2 Cascade R134a/CO 2 subcritical rack. - Modular and compact solution combining a low temperature CO 2 rack from 3 kw to 55 kw, coupled in cascade to a medium temperature R134a rack from 18 kw to 180 kw. - Safe CO 2 technology. - Optimized energy efficiency. 178, rue du Fauge - Z.I. Les Paluds BP 1152 13782 Aubagne Cedex - France Website: www.profroid.com Tél. +33 4 42 18 05 00 - Fax +33 4 42 18 05 02 Manufacturer reserves the right to change any product specifications without notice. The cover photo is solely for illustration purposes and not contractually binding.