57 Piece Carpentry Kit FatMax Toolbox, FatMax Swivel-Lock, Retractable Knife Bench Plane (No.4), Block Plane (No.60-1/2), Hacksaw, FatMax Handsaw 500mm, JetCut Back Saw, FatMax Jab Saw, Hole Saw Set,Coping Saw, 5 piece Chisel Set, 3 piece Sharpening Set, FatMax Tapes 8 & 30 Metres, Folding Rule 1 Metre, Combination Square 300mm, Marking Gauge, Hardwood Bevel 203mm, FatMax Chalkline Reel Set, Intellisensor Stud Finder, FatMax Level 600mm, CL-2 Self Levelling, Crossline Laser Level, FatMax AntiVibe Claw Hammer, Rubber Mallet, 3 piece Cushion Grip, Nail Punch Set, Wonder Bar, 14 piece Screwdriver Set, Adjustable Wrench 300mm, Combination Pliers 200mm, Multigrip Pliers 250mm, Tin Snips Straight/Right Cut 250mm Part Number: 92.0002 15 Piece Pre-Apprentice Kit Stanley Tape 8 Metre, Dynagrip Chisel 25mm, Longlife Rule 1 Metre, FatMax AntiVibe Hammer 20oz, Bevel 200mm, Combination Square 300mm, Nail Punch Set 3 Piece, FatMax Knife, Carpenters Pencil, Safety Glasses, Safety Earmuffs, Storage Bag, Tool Belt Part Number: 92.0005 Toolbox - cabinets 77 Piece Plumbers Kit Metal Toolbox 567x248x326mm, FatMax Swivel-Lock Retractable Knife, FatMax Hacksaw, FatMax Jab Saw, JetCut Handsaw 500mm, FatMax Tapes 8 & 30 Metres, Steel Rule 300mm, Folding Rule 1 Metre, Cast Iron Combination Square 300mm, FatMax Level 600mm, FatMax Chalkline Reel Set, Brass Plumb Bob 450g, FatMax AntiVibe Claw Hammer 570g, Ball Pein Hammer 450g, Club Hammer 1.5kg, Tripod Torch, 14 piece Screwdriver Set, 10 Metric Hex Keys, 10 Imperial Hex Keys, Intellisensor Stud Finder, Multigrip Pliers 250mm, Locking Pliers 250mm, Adjustable Wrenches 150 and 250mm, Pipe Wrenches 250 and 450mm, Diagonal Cutting Pliers 190mm, Combination Pliers 200mm, Tin Snips Straight/Right Cut 250mm, Tin Snips Straight/Left Cut 250mm, Riveter, Punch and Cold Chisel Set, Sidchrome Cold Chisel 25mm, Tube Cutter, Carpenters Pencil, Safety Glasses, Ear Muffs Part Number: 92.0003 Storage Cabinet - 16 Drawer Heavy gauge sheet steel with enamelled powder coated finish Weight: 6.29kg W: 436mm D: 190mm H: 288mm Part Number: 51002 159
Toolbox - Cantilever HAND TOOLS 160 High Density Cabinets Smooth operating drawer extend to 100% of depth Safe locking system enables access to only one drawer at a time Flexible: Drawer configurations can be modified, divisions, bins and partitions available Sealed roller bearings for reduced maintenance Part No. Description Drawer Configuration High Density Cabinet - 822mm (H) x 720W x 777D HDC8225 5 Drawer Cabinet 1 x 90mm 2 x 60mm 1 x 90mm HDC8226 6 Drawer Cabinet 3 x 60mm HDC8227 7 Drawer Cabinet 2 x 90mm 3 x 60mm HDC8228 8 Drawer Cabinet 3 x 90mm High Density Cabinet - 1232mm (H) x 720W x 777D 1 x 60mm 2 x 90mm HDC12328 8 Drawer Cabinet 3 x 150mm HDC12329 9 Drawer Cabinet 1 x 60mm HDC123210 10 Drawer Cabinet 3 x 60mm 3 x 90mm 3 x 120mm 5 x 60mm HDC123212 12 Drawer Cabinet High Density Cabinet - 1562mm (H) x 720W x 777D 1 x 60mm 2 x 90mm HDC156210 10 Drawer Cabinet 3 x 120mm 2 x 240mm HDC156212 HDC156214 HDC156216 12 Drawer Cabinet 14 Drawer Cabinet 16 Drawer Cabinet 2 x 60mm 3 x 120mm 4 x 60mm 4 x 120mm 8 x 60mm Drawer Capacity Single Compartment Tool Box with Cantilever Tray The top tray is ideal for small tools like sockets and screwdrivers and lifts up out of the way for access to the small parts channel. Full length piano hinge for strength and heavy duty hasp and staple. Dimensions: 502x248x265mm (6.5kg) Part Number: 92.063 Five Tray Cantilever Tool Box Trays ideal for storing sockets. Dimensions: 464x206x205mm (5.0kg) Part Number: 92.142 Toolbox - Chests 9 Drawer Tool Chest Size: W665 x D305 x H435mm Part Number: 50209 8 Drawer Tool Chest Size: W665 x D305 x H435mm Part Number: 50208
3 Drawer Tool Chest Size: W600 x D260 x H325mm Part Number: 50203 Add On Tool Chest - 3 Drawer 3 ball bearing slide drawers with edges and aluminium big grip drawer handles Improved internal locking system W: 672mm D: 320mm H: 258mm Part Number: K7763 8 Drawer Premium Tool Chest Auto Return Slides (ARS), Industrial Gas Struts, 100% drawer extension allows full access to tools, Heavy gauge steel on critical sections of chest, Rolled edge drawer sides for torsional rigidity, PVC grommets on base prevent scratching, Full length piano hinge on lid for extra strength, Stylish drawer handles, Lockable with Sidchrome branded key ring, All drawers fitted with drawer liners, Fit on top of existing, Sidchrome Roller Cabinets, 665mm (W) x 305mm (D) x 435mm (H). Part Number: 50248 Single Compartment Tool Box with Sliding Half Tray Lockable latch is fitted for added security. Dimensions: 442x152x146mm (2.1kg) Part Number: 92.031 Tool Chest - 10 Drawer 10 ball bearing slide drawers with edges and aluminium big grip drawer handles Heavy carry handles with rubber grip W: 1290mm D: 435mm H: 495mm Part Number: K7770 Tool Chest - 8 Drawer 8 ball bearing slide drawers with edges and aluminium big grip drawer handles Lockable privacy drawer Heavy duty carry handles with rubber grips W: 1023mm D: 435mm H: 495mm Part Number: K7760 Tool Chest - 6 Drawer 6 ball bearing slide drawers with edges and aluminium big grip drawer handles Heavy duty carry handles with rubber grips W: 660mm D: 315mm H: 373mm Part Number: K7766 Tool Chests Ball Bearing Slides. Heavy gauge sheet steel. Tough industrial powder coating. Fully extendable drawers. Aluminium drawer handles / moulded side handles. Includes drawer liners. Double walled fabrication. Rolled edge construction. Full length piano hinges. Snap-lock drawers. Double lid support. Lockable drop front. Part Number Description Size WHI503B Tool Chest 6 Drawer Ball Bearing 660W x 310D x 370H WHI510B Tool Chest 11 Drawer Ball Bearing 660W x 460D x 520H Tool Chest - 10 Drawer 10 ball bearing slide drawers with edges and aluminium big grip drawer handles Lockable front flap Heavy duty carry handles with rubber grips W: 660mm D: 435mm H: 483mm Part Number: K7755 161
TOOLBOXES - chest - wide S8WCR 6 Drawer Tool Chest All ball bearing slides Lockable front panel Part Number Width (mm) Depth (mm) Height (mm) Weight (kg) C66BBS 663 307 380 28 9 Drawer Tool Chest All ball bearing slides Rear locking mechanism actuated by lid and cam lock Part Number Width (mm) Depth (mm) Height (mm) Weight (kg) C99BBS 663 307 435 32 Senator 8 Drawer Superwide Chest S8WCR Heavy duty side handle on both sides Gas Struts to secure lid Fitted with Lock on auto return slides Designed to fit on Senator Superwide Trolleys All drawers with drawer liners Fold away side trays on both sides with liners. S8WCB Blue 1167 480 540 65 S8WCR Red 1167 480 540 65 S6CR S6CB ST12WTR ST12WTB HAND TOOLS Senator 6 Drawer Tool Chest Gas struts to secure lid Lock on auto return slides for secure closing. Rear locking mechanism actuated by closing lid Liners for all drawers S6CB Blue 700 320 397 25 S6CR Red 700 320 397 25 S9CB Senator 12 Drawer Superwide Trolley Packed with superior features: Fitted with Lock on auto return slides Heavy duty side handle on both sides Lacquered wooden top. Large 138mm x 50mm TPR** castors, 2 fixed, 2 swivel with brake. Centre locking and all drawers with drawer liners Huge bottom right hand drawer Great lift up side tables. Maximum weight allowable 3kg Delivered fully assembled on pallet **TPR Thermo Plastic Resin Senator 9 Drawer Tool Chest S9CR Foldaway side trays on both sides Gas struts to secure lid Lock on auto return slides for secure closing. Rear locking mechanism actuated by closing lid S9CB Blue 700 320 451 29 S9CR Red 700 320 451 29 ST12WTB Blue 1167 480 1016 119 ST12WTR Red 1167 480 1016 119 TOOLBOXES - low profile LP1250 LP1550 S10CB 162 Senator 10 Drawer Deep Tool Chest Foldaway side trays on both sides Extra deep (480mm) chest for larger tools Gas struts to secure lid Lock on auto return slides for secure closing. Rear locking mechanism actuated by closing lid S10CB Blue 792 480 548 50 S10CR Red 792 480 548 50 S10CR Aluminium Low Profile Box Manufactured from 1.5mm aluminium checkerplate Fully welded construction Strong hinges to secure lid to body Fitted with stainless steel hasp and staple for security LP950 950 600 500 16 LP1250 1250 600 500 19 LP1550 1550 600 500 27 LP186050 1770 600 500 37
TOOLBOXES - one tonner TOOLBOXES - site box DAL1210 AL1500 SITETWO Aluminium One Tonner Manufactured from 2.0mm, 3003 grade, aluminium checkerplate Hinged angled lid, fully welded and fitted with T locks keyed alike Full rubber seal and gas struts Full length door on DAL1210, ideal for larger items such as welders, compressors, generators, etc. supplied with full length shelf (to be fitted by purchaser) AL900 900 500 680 25 AL1210 1210 500 680 30 AL1500 1500 500 680 38 DAL1210 1210 500 680 26 SB1210 Site Box Site Boxes - THE ULTIMATE IN ON SITE SECURITY Contractor One Site Boxes now feature the unique Swing n Slide locking system with four secure locking points Made from fully welded 1.5mm cold rolled steel Provision for fork lift transport Extra heavy duty side handles and concealed hinges Powder coated yellow gloss for maximum visibility Strong gas struts to secure lid Using the key unlock the site box then turn the large metal handle to release the Swing n Slide locking system and raise the lid. To close simply lower the lid; the whole front slides under the rebated length of the chassis. At the same time two steel bars at the rear of the lid engage with the back of the chassis as the lid slides forward. Insert the key and lock the box. Excellent foolproof security. SITEONE 1220 615 700 73 SITETWO 1220 760 850 92 SITETHREE 1000 1000 640 88 Steel One Tonner White Fully welding cold rolled steel Powder coat white ripple T handled locks keyed alike Full rubber seal around inside of lid SB1210 1210 500 680 48 SB1500 1500 500 680 62 tool boxes - safecase tool boxes - tradesmans Tradesman Box - Large Heavy duty gauge sheet steel, with a charcoal hammertone powder coated finish Heavy duty construction Chain lid stays Hasp and staple locking system W: 1200mm D: 450mm H: 360mm Part Number: 51088 TOOLbox - trolley Safe Case - Medium Water tight Vibration proof Dust proof Shock proof Light weight Chemical resistant Fully lockable for added security Super strong latches W: 330mm D: 280mm H: 120mm Part Number: 51011 5 Drawer Roller Cabinet Size: W680 x D460 x H845mm Part Number: 50215 163
7 Drawer Premium Roller Cabinet Accessory slots on side for adding utilities, Auto Return Slides (ARS) 100% drawer extension allows full access to tools, Heavy gauge steel on critical sections of chest, Rolled edge drawer sides for torsional rigidity, Heavy duty 5 Castors with foot brake for maximum mobility, Stylish drawer handles, Lockable cabinet with Sidchrome branded key ring, All drawers fitted with drawer liners, Suits full range of Sidchrome tool chests(except the wide body 50218), 680mm (W) x 460mm (D) x 1000mm (H) (height includes castors) Part Number: 50247 Tool Trolley - 7 Drawer 7 ball bearing slide drawers with protective foam drawer liners, rolled edges and aluminium big grip drawer handles Complete with 2 fixtures and 2 swivel, 5 x 2 castors with brakes W: 689mm D: 466mm H: 985mm Part Number: K7767 HAND TOOLS 7 Drawer Trolley All ball bearing slides, Big 125mm x 50mm castors, 2 fixed, 2 swivel with brakes Centre locking mechanism on drawers with cabinet lock Part Number Width (mm) Depth (mm) Height (mm) Weight (kg) T77BBS 680 460 1000 68 Senator 7 Drawer Trolley Lock on auto return slides. Heavy duty side handle on both sides. 125mm x 50mm castors, 2 fixed, 2 swivel with brake. Centre locking mechanism with cabinet lock. Fold away side trays on both sides with liners. Fitted top mat. Safe One TM feature allows only one drawer to be opened at a time S7TB Blue 793 480 1007 72 S7TR Red 793 480 1007 72 Tool Trolley - 10 Drawer 10 ball bearing slide drawers with protective foam drawer liners, rolled edges and aluminium big grip drawer handles Internal Locking system Oval shaped, ergonomic handle 2 fixed and 2 swivel castors with brakes Protective mat on top of trolley W: 1320mm D: 466mm H: 985mm Part Number: K7775 toolboxes - truck AL1250 AL1450 Aluminium Truck Box AL765 Manufactured from 1.5mm aluminium checkerplate Fully welded construction Strong hinges to secure lid to body Keyed locks on AL1250 and AL1450 stainless steel hasp and staple on AL765 AL765 765 335 250 6 AL1250 1250 380 380 14 AL1450 1450 520 465 21 SB765 164 Roller Cabinets Ball Bearing Slides. Heavy gauge sheet steel. Tough industrial powder coating. Fully extendable drawers. Aluminium drawer handles for easy grip. Includes drawer liners and top mat. Complete with heavy duty 250kg castors; fixed and 2 swivel with brakes. Double walled fabrication. Rolled edge construction. Snap-lock drawers. Part Number Description Size WHI753B Roller Cabinet 16 Drawer 1040W x 460D x 1020H WHI880B Roller Cabinet 56 13 Drawer 1430W x 610D x 1000H Steel Truck Box Fully welded Made from 1.5mm cold rolled steel Zinc coated for rust protection Strong chains Extra HD hasp and staple Powder coat white ripple Stainless steel external fittings SB1200 SB765 765 335 315 20 SB1200 1200 440 360 34.5
BKAT1500 BKAT700 BKAT1210 TOOLBOXES - under tray UTBL Aluminium Under Tray Box Lockable T Box and reinforced lining Made from 1.5mm aluminium checkerplate Reinforced fitting plate x 2 Part No. Position Width (mm) Depth (mm) Height (mm) Weight (kg) UTBL Left 750/520 270 400 7 UTBR Right 750/520 270 400 7 TORQUE multiplier BKAT1770 BKAT Steel Truck Boxes BKAT1210 SQ Sealed bearing slides rated to Fully welded cold rolled steel Ideal for the travelling tradesperson T handle keyed locks Powder coated white with weather seal to keep out dust 2 x heavy duty drawers 4 x heavy duty handles except on BKAT1770 Locking rods to secure drawers BKAT700 700 600 750 68 BKAT1210 1210 600 750 108 BKAT1500 1500 600 750 130 BKAT1210SQ 1210 600 520 90 BKAT1770 1770 600 750 185 Truck Box - 3 Drawer 4 lift-out trays with storage well and 3 full sized large drawers Locking system and 4 carry handles Weather resistant Water gutters in both drawers Lockable latch W: 700mm D: 405mm H: 590mm Part Number: 51085 Truck Box Set - 3 Piece Small (765mm), medium (1230mm), large (1450mm) Heavy duty gauge aluminium chrome plated Fully welded construction Stainless steel hinges Part Number: 51030 Torque Multiplier - M18 Torque Ratio: 4:1 437Nm / 322ft.lbs. 1750Nm / 1290ft.lbs. Input Drives: Male Hex 38mm / 1.1/2 Female Square 19mm / 3/4 Output Drive: Male Square 19mm / 3/4 Length (ex. Reaction Foot): 196mm / 7.7 Maximum Diameter: 82mm / 3.2 Part Number: M18 Torque Multiplier - M30 Torque Ratio: 12:1 250Nm / 184ft.lbs. 3000Nm / 2208ft.lbs. Input Drives: Male Hex 38mm / 1.1/2 Female Square 19mm / 3/4 Output Drive: Male Square 25.4mm / 1 Length (ex. Reaction Foot): 263mm / 10.3 Maximum Diameter: 95mm / 3.7 Part Number: M30 Torque Multiplier - M60 Torque Ratio: 40:1 150Nm / 110ft.lbs. 6000Nm / 4400ft.lbs. Input Drives: Male Hex 38mm / 1.1/2 Female Square 19mm / 3/4 Output Drive: Male Square 38mm / 1.1/2 Length (ex. Reaction Foot): 352mm / 13.8 Maximum Diameter: 110mm / 4.3 Part Number: M60 Torque Multiplier - 301000 Torque Ratio: 3:1 460Nm / 340ft.lbs. 1400Nm / 1000ft.lbs. Input Drive: 12.7mm / 1/2 Output Drive: Male Square 19mm / 3/4 Part Number: 301000 Torque Multiplier - 302000 Torque Ratio: 3:1 900Nm / 650ft.lbs. 2700Nm / 2000ft.lbs. Input Drive: 19mm / 3/4 Output Drive: Male Square 25.4mm / 1 Part Number: 302000 165