LIGHTING CONTROL SYSTEM

LIGHTING CONTROL SYSTEM 2007-2008 Reducing energy consumption within your building PIR Presence Detectors Lighting Control Systems Timers and Time Controls Cableplan Park House Kylemore Park North Ballyfermot Dublin 10 Ireland T: +353 (0) 1 626 8888 F:+353 (0) 1 626 8889 e: info@park-house.net W: www.cableplan.ie

CLIENT PORTFOLIO Riverside I, Sir John Rogersons Quay Bank Centre, Ballsbridge Cultural Centre, Beacon South Quarter Allied Irish Bank McCann Fitzgerald KPMG Wachovia Bank Beacon South Quarter apartments Cultural Centre Beacon South Quarte Educational Board CIBC Omni House RBS Manchester Windmill Hill 72 Welbeck Street Churchill Court Spinningfields 80 Cannon Street Wakefield House Peninsular House North Wales Police HQ High Holborn House Whittington House Tower Buildings Alan James BMW Hartwell House EDS Group Hook

Cableplan Company Profile Cableplan have been providers of lighting control systems for over a decade. Cableplan deliver optimum lighting solutions, cost-effectively and on time, tailored to the demands of each project. This lighting system has been used in variety of different applications, including homes, offices, restaurants, hotels, hospitals, museums, conference centers and schools. We have a wealth of experience behind us through the supply of professional lighting systems to customers around the country. We provide a rapid response to enquiries with the provision of detailed quotations and AutoCAD system drawings. We undertake the design, supply, programming and commissioning of the system. Project handover is supported with complete documentation, including drawings and client training. Customer support is available 24 hours, along with flexible maintenance contracts. The control system provided by Cableplan is manufactured by CP Electronics in London. Cableplan Tel : 01 626 8888 3

INTRODUCTION INTRODUCTION People are the primary investment in most businesses and our controls have been designed to create the environment in which people feel comfortable. Since Cableplan were established in 1989 it has been our philosophy to design reliable energy saving controls that optimise comfort and minimise energy costs. Specifiers, contractors and users can source energy saving controls for lighting, from a single supplier. Cableplan provide a wide range of energy saving controls, from a simple time lag switch to a fully addressable lighting control system. All the products have been manufactured to the highest possible standards. We are committed to offering our customer the highest level of quality and service. HAVE YOUR FUTURE UNDER CONTROL We are now regularly encouraged to use energy saving controls for a wide range of applications. The introduction of the Climate Change Levy and Part L of the Building Regulations has confirmed that the use of energy saving devices will become a part of every building in the future. In our catalogue you will find a wide range of controls that offer a simple solution to the control of lighting, heating and ventilation for the purpose of energy saving. All our controls are easy to specify and install and user friendly. Because our range is simple, energy savings are achieved in a very short time. Quality ISO9001 accredited company Most of our products are manufactured in the UK by CP Electronics All of our products are fully tested Our products, where applicable, carry the CE mark Cableplan Tel : 01 626 8888 4

LIGHTING CONTROL SYSTEM The Lighting Control system provided by Cableplan is manufactured by CP Electronics and is known as the Rapid system. The Rapid system is a fully addressable lighting control system which combines state of the art technology with the flexibility to meet most lighting control applications. With the Rapid lighting control system it is possible to provide an economic, energy efficient and flexible lighting control solution. Rapid benefits all. CLIENT The client is concerned with minimising costs, ongoing running costs and payback periods whilst having the flexibility to change building layouts to accommodate the needs of the tenants; Rapid satisfies each of these objectives. Rapid can be reconfigured easily to meet the needs of a new tenant with an easy to use programming handset or through a PC, eliminating traditional expensive rewiring costs. Other benefits include lower operating costs by reducing the amount of electricity the building consumes. CONTRACTOR Rapid is designed to drastically reduce installation time. All products in the system are connected using industry standard plug and socket connections. A unique manual infrared facility enables the system to be configured prior to delivery, thus minimising final system commissioning. APPLICATIONS Commercial offices Educational establishments Public buildings Industrial Hospitals SPECIFIER Rapid offers the design engineer the flexibility to realise sophisticated lighting systems, which would be costly and difficult using conventional wiring techniques. Rapid is a fully modular concept which can be incorporated into the building design with ease. Rapid also meets the criteria set out in part L of the building regulations. KEY FEATURES AND BENEFITS Modular Concept Simple to specify Plug in connections Quick to install Local and central configuration Easy set-up ELV switching Safe multi circuit switching Emergency testing Simple testing of emergency fittings Presence detection Increased energy saving Scene selection User comfort Daylight linking Maintained luminance / constant light level Corridor hold Maintains corridor lighting / ensures safe egress lighting Load shedding Reduce load under maximum demand/standby generator conditions 10 output LCM Increased flexibility Cableplan Tel : 01 626 8888 5

COMPONENTS Rapid Lighting Control Module Rapid Presence Detector Rapid Bus Controller Rapid Bus Terminator Rapid Bus Backbone Rapid Light Switch Interface Rapid Interface Central Test Unit Computer Rapid Programming Handset Rapid User Handset Cabling SYSTEM DISCRIPTION With the Rapid lighting control system it is possible to provide an economic, energy efficient and flexible lighting control solution. The lighting control system has been used in variety of different applications, including homes, offices, restaurants, hotels, hospitals, museums, conference centres and schools. Lighting operation can be through detection, switches, remote control or timed events. Rapid is designed to drastically reduce installation time. All products in the system are connected using industry standard plug and socket connections, for plug and play installations. It is a fully addressable lighting control system which combines state of the art technology with the flexibility to meet all lighting control applications. A unique manual infrared facility enables the system to be configured prior to delivery, thus minimising final system commissioning. The system is fully flexible to be reconfigured locally through an infrared handset or through a front end PC or after commissioning. Luminarie time of operation can be recorded to provide maintenance schedules and monitor emergency battery pack life. Lighting features that can be incorporated are scene setting, audio-visual and BMS systems interfaces, partition linking and other functions. Maintenance Cableplan supports its systems with a full warranty and offers facilities managers the reassurance and value of a good standard maintenance contract. Fully training on the system is provided to enable in house system support for facilities managers. An enhanced package includes additional features like extended warranty and free software upgrades. Alternatively, individual service contracts can be specially tailored to fulfill customers specific requirements. Cableplan Tel : 01 626 8888 6

RAPID LIGHTING CONTROL MODULE Lighting System Control Network Timed events CTU AC Controller PD Bus Network LCM LCM PD PD PD Repeat to next floor AC PD LCM LCM LCM LCM LCM P D PD PD Optional PC Cableplan Tel : 01 626 8888 7

RAPID LIGHTING CONTROL MODULE Cableplan Tel : 01 626 8888 8

RAPID LIGHTING CONTROL SYSTEM SYSTEM DEVICES RAPID Rapid lighting control modules can control up to 10 luminaires from one control box. The lighting control module provides ten individually addressable channels controlling 10 independent outputs. 8 switch input interfaces and two RJ45 connections for presence detectors and other peripheral devices are provided on the front of the lighting control module. The lighting control module is designed for ease of installation and set up; all connections to the unit can be pre-wired; an integral emergency lighting test facility allows the supply to the luminaires to be interrupted using the lighting control system. A dimming option is available for both 1-10V analogue, DSI and DALI ballasts. LIGHTING CONTROL MODULE ORDER CODE DESCRIPTION EBR-LCM10-10 Rapid 10 channel lighting control module EBR-LCM10-10D Rapid 10 channel lighting control module 1-10V EBR-LCM10-10DSI/DALI Rapid 10 channel lighting control module DSI/DALI European Union registered design No.000512728 EBS-PC3MLSF EBS-PC5MLSF 3 metre patch cord 5 metre patch cord Cableplan Tel : 01 www.cpelectronics.co.uk 626 8888 9

RAPID LIGHTING CONTROL MODULE PRODUCT DATA AND INSTALLATION SHEET RAPID LIGHTING CONTROL MODULE EBR-DIN-LCM5-5, EBR-DIN-LCM5-5 (/D, /DSI, /DALI) DESCRIPTION AND OPERATION The EBR-DIN-LCM5-5 series of lighting control modules (LCMs) are used as part of the Rapid lighting control system to switch lighting. They have five individually addressable output ports for switching, and on the D, DSI and DALI models these also provide dimming signals for dimmable luminaires. A separate relay is used for emergency testing. Incorporated on the box is an eight channel interface for connection to external devices such as light switches, emergency test switches and time clocks. The LCM offers many features including: Individual addressing of outputs Adjustable off delays and group delays Adjustable start up lighting levels Scene control for each channel Bus and activity LEDs IR or computer front end setup INSTALLATION AND WIRING Warning. This device works at mains potential. Be sure to take care when working with electricity. Install the module in a suitable housing. This unit is compatible with standard DIN rail enclosures Wire as in the diagram opposite. Two types of output are provided: Switched output x 5 Emergency lighting test output The switched output are voltage free and can be used across multiple circuits WARNING ENSURE CIRCUITS ARE ON THE SAME PHASE Where multiple emergency lighting circuits are used, a multi-pole contactor should be connected to the emergency lighting test terminals to provide isolated outputs. Where specified on the installation drawings, connect switches to the interface connections between the input and common. Switches must be isolated.

RAPID The Rapid system passive infrared presence detector provides occupancy and light level information for the lighting control system. The detector monitors for occupancy within its detection zone, if the area is occupied the lights will turn on, when the area is vacated then the lights will turn off. An integral light sensor measures ambient light and if there is sufficient natural light then the detector will hold the lights off. Where dimming ballasts are used the detector light level is used to determine the light output, and the light level setting becomes the target light level. This detector is capable of controlling over a 5-7m area and is ideally suited to open plan and cellular offices. An optional infrared controller can be used to override the detector operation if required. DETECTION RANGE DIAGRAM ON PAGE 45 SYSTEM PRESENCE DETECTOR RAPID LIGHTING CONTROL SYSTEM ORDER CODE DESCRIPTION EBR-CPIR Rapid ceiling mounted passive infrared presence detector RAPID The Rapid system microwave presence detector provides occupancy and light level information for the lighting control system. The detector monitors for occupancy within its detection zone, if the area is occupied the lights will turn on, when the area is vacated then the lights will turn off. An integral light sensor measures ambient light and if there is sufficient natural light available then the detector will hold the lights off. Where dimming ballasts are used the detector light level is used to determine the light output, and the light level setting becomes the target light level. The detector is capable of controlling up to 30m, making it suitable for corridors and large open plan spaces. An optional infrared controller can be used to override the detector operation if required. CEILING MOUNTED MICROWAVE PRESENCE DETECTOR DETECTION RANGE DIAGRAM ON PAGE 46-47 ORDER CODE DESCRIPTION EBR-MWS3 Rapid ceiling mounted microwave presence detector UK Patented. No.0411069.8 Cableplan T: +44 (0)20 8900 0671 Tel : 01 626 8888 10

RAPID LIGHTING CONTROL SYSTEM RAPID The Scene select plate provides advanced scene setting functions for the Rapid lighting control system. When used in conjunction with dimming lighting control modules and suitable dimming luminaries, complex lighting scenes can be set for applications such as conference rooms and office suites. The scene select plate provides the following features: Up to 8 scenes selectable using 4 buttons, plus a separate off scene Up/Down override Adjustable fade rates up to 99 minutes, individually selectable for each scene Room divide input suitable for up to 3 interconnecting rooms Support for up to 99 individual circuits ORDER CODE DESCRIPTION SCENE SELECT PLATE EBS-4SC Rapid scene select plate RAPID Rapid area controllers provide data and power to the system whilst managing the communications. Rapid can be used in buildings of all sizes and the area controller can be scaled to the size of the project. All devices within the area controller are DIN rail mounted and are delivered to site pre-wired. The area control devices are as follows: Power Supply [ EBR-DIN-PSU] Bus control, backbone control and interfacing [EBR- DIN-CTRL] Time scheduling for timed events and emergency test [EBR-DIN-TSCH] All devices are delivered pre-wired and mounted in a DIN rail mounting enclosure. AREA CONTROLLER Cableplan Tel : 01 626 8888 11

RAPID The Rapid graphical interface is designed to provide the user flexible control and monitoring of the lighting from a PC. Bitmaps of the building floors can be illustrated for all control devices, which are graphically depicted as icons on the floor layout or in a drop down window within Microsoft Windows. The graphical interface gives the user the ability to re-configure control devices or monitor their status, changing of lighting groups can be achieved quickly and simply thus negating the need for physical changes within the ceiling void. Time settings for presence detectors, corridor and group hold delays can be adjusted to the client's requirements. An event calendar provides the client with the ability to schedule lighting control events for special occasions, cleaning, re-lamping and emergency testing of lights. Lamp error feedback is reported for any luminaire which is controlled by a DALI ballast. ORDER CODE EBR-CFE-PC DESCRIPTION Computer Software package c/w PC GRAPHICAL INTERFACE RAPID LIGHTING CONTROL SYSTEM RAPID DALI EMERGENCY MONITORING The effective monitoring of emergency luminaries is achieved when the Tridonic EMPRO inverter is fitted into the emergency light fitting along with the ballast and battery pack. The monitoring is carried out using a 2 wire DALI control cable which is connected via the luminaire lead to the lighting control module and in turn monitored by the Rapid graphical interface. Key Features of the Emergency Monitoring Package Emergency lamps and ballasts are tested every few minutes to ensure presence, communications and detection of lamp failure. Flexible test scheduling using the Rapid graphical interface - including test duration and least time of risk. ORDER CODE DESCRIPTION Rapid graphical package illustrates pass/fail status of the emergency fittings which includes: EBR-EMLTU Emergency monitoring upgrade for EBR-CFE Lamp failure Ballast failure DALI short circuit Communication failure Battery pack open circuit Battery pack no longer fully chargeable The system ensures that duration tests will only commence when the battery is fully charged. No DALI addressing routine required, all addressing carried out using the normal easy to use Rapid programming format. Key switch method of testing emergency luminaires is still available. Cableplan Tel : 01 626 8888 12

RAPID LIGHTING CONTROL SYSTEM RAPID The programming handset is used to configure all system devices. The handset has a simple to use text based menu and keypad. The programming handset also has user menus which allow IDs and timing information to be read back from system devices. ORDER CODE EBS-LCDHS RAPID DESCRIPTION Programming handset The handset allows the user to override the system detectors. There are two types available: the 8 button handset (part number UHS) can be used to adjust lux settings and override the detector ON/OFF. The 3 button (part number UHS3) is used to override the system detectors ON/OFF. PROGRAMMING HANDSET USER HANDSET ORDER CODE DESCRIPTION UHS UHS3 User handset override on/off, lux up, lux down User handset on/off RAPID Cableplan provide full lead sets for data connection between system devices, or project specific advice on the connection of a network through a structured wiring solution. CONNECTIVITY We also have the ability to fit any manufacturer's structured wiring TEE s to our lighting control module. Cableplan can also provide any length of leads to interconnect between the luminaries and the lighting control module. TECHNICAL SUPPORT It is our aim to make the purchase and implementation of the Rapid lighting control system as straightforward as possible. A full technical catalogue is available. This provides full technical specifications for each system device. It also provides best practice advice on applying the system to your application. Our dedicated system technical sales team or one of our system partners will be happy to visit you and discuss your requirements. Alternatively contact our application engineering team on: Telephone +353 (0) 1 626 8888 Fax +353 (0) 1 626 8889 Email info@park-house.net We offer full support throughout the project process Application advice Full technical documentation System commissioning Installer support Site specific technical documentation Post completion technical support Cableplan Tel : 01 626 8888 13

Cableplan can provide any length of lead to interconnect between the luminaries and the lighting control module. We also have the ability to fit any manufacturer's structured wiring tees to our lighting control module. All luminaire connections use the 6 pole GST connector system with a side latch and low profile hood. The unique latch on the side of the connector locks onto the side of the lighting control module preventing accidental removal. Pre-wired luminaire leads offer a reduction in installation time and are available in a number of different lengths and configurations. Please contact our sales office for details. Cableplan Tel : 01 626 8888 14

All detection devices are connected to the lighting control module using industry standard RJ45 patch leads. Network connection between control modules can also be done using CAT5 cable. Cableplan Tel : 01 626 8888 15

CEILING MOUNTED PIR SWITCHES EBDSPIR This compact presence detector provides automatic control for lighting, heating and ventilation loads. The detector can be mounted either flush into a ceiling tile or on the surface using a fast fix detector box. The optional infrared version allows the user to override the lights to on or off. DETECTION RANGE DIAGRAM ON PAGE 25 KEY FEATURES AND BENEFITS Low profile design Self contained unit Reduced head size Plug in connections Remote handset (option) Can be mounted in narrow ceiling void No external control boxes Unobtrusive to the occupant Reduced installation time Allows user to override the detector COMPACT CEILING MOUNTED PRESENCE DETECTOR 0 20 40 30 SPIR-F/C The SPIR-F/C ceiling mounted presence detector can be easily mounted onto a British Standard switch box either surface or flush mounting. The detector has a built in photocell which will keep the lighting switched off if there is sufficient natural light. The SPIR-F/C can be used to control lighting heating and ventilation loads NEW PRODUCT CEILING MOUNTED PRESENCE DETECTOR DETECTION RANGE DIAGRAM ON PAGE 25 20 0 40 30 SPIR-F/C ORDER CODE DESCRIPTION LOAD RATING AT 230VAC TIME DELAY Resistive Incandescent Fluorescent Compact Fluorescent EBDSPIR Ceiling mounted presence detector with time and 10A 8A 6A 3A 10 sec- 30 min lux level adjustment EBDSPIR-L3 Ceiling mounted presence detector pre-wired with 3m lead 10A 8A 6A 3A 10 sec- 30 min EBDSPIR-IR Ceiling mounted presence detector with infrared override control 10A 8A 6A 3A 10 sec- 30 min EBDSPIR-IR-L3 Ceiling mounted presence detector with infrared override control 10A 8A 6A 3A 10 sec- 30 min pre-wired with 3m lead SPIR-F/C Ceiling mounted presence detector for square accessory box 10A 8A 6A 3A 10 sec- 30 min UHS3 DBB User handset override on/off Surface mounting back box for EBDSPIR range Cableplan Tel : 01 626 8888 17

DIRECT DIM Direct Dim is a ceiling mounted presence detector that offers presence detection and dimming control in one simple unit. A host of energy saving features are combined in Direct Dim to provide a simple cost effective solution to energy efficiency. Offering presence detection via passive infrared, Direct Dim provides a DSI or DALI dimming output in addition to a switched relay output. The dimming channel of the detector can be used to control the light output of luminaries that are fitted with dimming ballasts. The detector measures the overall light level in the detection area and calculates the correct output for the luminaries, to achieve a preset lux level. The two outputs can operate together or independently, allowing one output to be dimmed whilst the other output is switched. Two switch inputs are included to allow manual control: for example absence detection on either channel; dimming up/down; or override on/off. The use of a two position switch allows simple dimming up and down, rather than awkward single switch control. The detector can be set using either integral presets or by using a separate handset for more detailed functions. Please note: Direct Dim detectors can control up to 20 dimming ballasts DETECTION RANGE DIAGRAM ON PAGE 25 NEW PRODUCT APPLICATIONS Commercial offices Education Public buildings DIMMING CEILING PRESENCE DETECTOR KEY FEATURES AND BENEFITS Absence detection Enhanced energy saving Daylight linking Constant light level Dual output Flexible control Manual switch inputs User override Manual dimming Adjustable light output Integral set up Quick commissioning User handset (optional) Allows user to override detector Scene setting User comfort CEILING MOUNTED PIR SWITCHES ORDER CODE DESCRIPTION LOAD RATING AT 230VAC TIME DELAY Incandescent Fluorescent Compact Fluorescent EBDSPIR-DD Direct dimming presence detector DSI/DALI 8A 6A 3A 10 sec-30 min DD-LCDHS UHS UHS3 DBB Programming handset for Direct Dim detectors User handset override on/off; lux up/lux down User handset override on/off Surface mounting back box Please note: for 1-10V analogue dimming applications refer to our website. QUICK FIT INSTALLATION CEILING TILE The detector can be mounted into a ceiling tile using a flush mounting clip which comes as standard. This can be adjusted to suit different depths of ceiling tile. SURFACE MOUNTING The detector can be surface mounted using the optional surface mounting box (part number DBB), which mounts onto a BESA box or directly onto the ceiling surface. Knockouts are provided for mini trunking access. 1. Cut hole and mount flush mounting clip 2. Set timing and light level and plug in connections 3. Fix into ceiling clip 1. Mount surface box onto the ceiling, and remove mini trunking knockout 2. Set timing and light level and plug in connections 3. Fix into detector box Cableplan Tel : 01 626 8888 15 18

MICROWAVE PRESENCE DETECTORS MICROWAVE PRESENCE DETECTORS Microwave presence detectors provide automatic control of lighting, heating and ventilation. With detection ranges up to 30 metres, microwave detectors are ideal for controlling appliances over large areas. The products have no external lenses making them unobtrusive and vandal resistant. A major benefit with the microwave sensors in this range is that no external control boxes are required, making the units easy to install and cost effective. APPLICATIONS Corridors Schools Offices Industrial warehouses Toilets Stairwells Universities Retail MWS-1 With a detection range of up to 30 metres the wall mounting microwave sensor is ideal for controlling lighting, heating and ventilation over large areas, especially corridors. The unit mounts directly on to a British standard switch box. It has no external lenses giving the unit the appearance of a standard accessory blank plate. The unit has an integral sensitivity and time adjustment. DETECTION RANGE DIAGRAM ON PAGE 26 0 20 40 30 KEY FEATURES AND BENEFITS Up to 30m detection No external lenses Wall or ceiling options Excellent detection Adjustable time delay Self contained unit Volt free contact option IP rated option Low no. of detectors required to cover a large area Vandal resistant Versatile mounting Large area coverage OPTIONS AVAILABLE Holds load on until occupant is no longer detected No external control boxes, minimises installation time Suitable for BMS and control applications Used for control in damp environments A built in adjustable light level sensor which will keep the lighting switched off if there is sufficient natural light. WALL MOUNTED MICROWAVE DETECTOR ORDER CODE DESCRIPTION LOAD RATING AT 230VAC TIME DELAY Resistive Incandescent Fluorescent Compact Fluorescent MWS-1 Microwave presence detector with 30m detection range 10A 10A 10A 10A 15 sec- 30 min MWS-1/FVF Microwave presence detector with voltage free output contact 10A 10A 10A 10A 15 sec- 30 min MWS-1/LUX Microwave presence detector with 30m detection range c/w 10A 10A 10A 10A 15 sec- 30 min lux level adjustment MWS-1/FVF/LUX Microwave presence detector with voltage free output 10A 10A 10A 10A 15 sec- 30 min contact c/w lux level adjustment MWS-IPK Weatherproofing kit to IP65 Cableplan Tel : 01 626 8888 19

MWS-1/C The ceiling mounted microwave presence detector has a major advantage over standard ceiling mounted PIR presence detectors. The sensitivity of the unit gives a full 10 metre (at 2.5m height) detection range, which means that any blind spots are easily covered using this sensor. The unit mounts directly on to a British standard switch box. It has no external lenses giving the unit the appearance of a standard accessory blank plate. The unit has an integral sensitivity and time adjustment. DETECTION RANGE DIAGRAM ON PAGE 26 0 20 40 30 CEILING MOUNTED MICROWAVE PRESENCE DETECTOR MICROWAVE PRESENCE DETECTORS ORDER CODE DESCRIPTION LOAD RATING AT 230VAC TIME DELAY Resistive Incandescent Fluorescent Compact Fluorescent MWS-1/C Microwave presence detector ceiling mount 10m 10A 10A 10A 10A 15 sec- 30 min MWS-1/C/LUX Microwave presence detector ceiling mount 10m c/w 10A 10A 10A 10A 15 sec- 30 min lux level adjustment MWS-IPK Weatherproofing kit to IP65 MWS-1/IP AND MWS-1/C/IP This range of microwave presence detectors has the same operation as MWS-1 and MWS-1/C but the units are mounted in IP66 enclosures for damp or industrial environments. IP RATED MICROWAVE PRESENCE DETECTOR DETECTION RANGE DIAGRAM ON PAGE 25-26 0 20 40 30 ORDER CODE DESCRIPTION LOAD RATING AT 230VAC TIME DELAY Resistive Incandescent Fluorescent Compact Fluorescent MWS-1/IP IP66 microwave presence detector with 30m range 10A 10A 10A 10A 15 sec- 30 min MWS-1/IP/LUX IP66 microwave presence detector with 30m range 10A 10A 10A 10A 15 sec- 30 min c/w lux level adjustment MWS-1/C/IP IP66 microwave presence detector with 10m range 10A 10A 10A 10A 15 sec- 30 min MWS-1/C/IP/LUX IP66 microwave presence detector with 10m range 10A 10A 10A 10A 15 sec- 30 min c/w lux level adjustment Please note: Special voltages available. Please contact our sales office for information. Cableplan T: +44 (0)20 8900 0671 Tel : 01 626 8888 20

MICROWAVE PRESENCE DETECTORS MWS-3 Unlike fixed head sensors, the MWS-3 Multi-Sense offers a unique presence detection capability by using an adjustable sensor head. By changing the angle of the sensor head different detection patterns can be achieved for different area coverage. For example with the sensor head flush in the detector housing, a coverage of 8m x 22m can be achieved; ideal for open plan areas e.g. offices and classrooms. If the detector head is angled at 80 then a detection of 8m x 30m can be achieved, ideal for corridors and aisles. An integral sensitivity adjustment allows the sensor to be fine tuned to the environment. Added features of the product include a built in infrared sensor which allows the user to override the lights to on or off and a built in adjustable light level sensor which will keep the lighting switched off if there is sufficient natural light. On the absence version of the detector an additional switch input is provided for manual on/auto off. The detector can be mounted either flush into a ceiling tile or on the surface using the integral fixing plate. DETECTION RANGE DIAGRAM ON PAGE 26-27 0 20 40 30 MULTI-SENSE MICROWAVE PRESENCE DETECTOR The benefits of having accurate but flexible detection patterns are: Unobtrusive detection Ease of installation Reduced installation costs Reduced number of sensors Highly sensitive detection reduces nuisance turn offs ORDER CODE DESCRIPTION LOAD RATING AT 230VAC TIME DELAY Resistive Incandescent Fluorescent Compact Fluorescent MWS-3 Multi-sense microwave presence detector 10A 10A 10A 10A 15 sec- 30 min MWS-3-L3 Multi-sense microwave presence detector pre-wired with 3m lead 10A 10A 10A 10A 15 sec- 30 min MWS-3/ABS Multi-sense microwave presence detector with absence function 10A 10A 10A 10A 15 sec- 30 min MWS-3-L3/ABS Multi-sense microwave presence detector pre-wire 3m lead with 10A 10A 10A 10A 15 sec- 30 min absence function UHS3 User handset override on/off UK Patented. No. 0411069.8 QUICK FIT INSTALLATION CEILING TILE Multi-sense can be mounted into a ceiling tile using a flush mounting clip which comes as standard. This can be adjusted to suit different depths of ceiling tile. SURFACE MOUNTING Multi-sense can be surface mounted using the optional surface mounting box, which mounts onto a BESA box or directly onto the ceiling surface. Knockouts are provided for mini trunking access. 1. Cut hole and mount flush mounting clip 2. Set timing and light level and plug in connections 3. Fix into ceiling clip 1. Mount surface box onto the ceiling, and remove minitrunking knockout 2. Set timing and light level and plug in connections 3. Fix into detector box Cableplan 18 Tel : 01 www.cpelectronics.co.uk 626 8888 21

MWS-3DD Direct Dim is a ceiling mounted presence detector that offers presence detection and dimming control in one simple unit. A host of energy saving features are combined in Direct Dim to provide a simple cost effective solution to energy efficiency. Offering superior multi sense presence detection via microwave, Direct Dim provides a DSI or a DALI dimming output in addition to a switched relay output. The dimming channel of the detector can be used to control the light output of luminaires that are fitted with dimming ballasts. The detector measures the overall light level in the detection area and calculates the correct output for the luminaires, to acheivea preset lux level The two outputs can operate together or independently, allowing an output to be dimmed whilst the other output is switched. Two switch inputs are included to allow manual control, for example absence detection on either channel or dimming up/down or override on/off. The use of a two position switch allows simple dimming up and down rather than awkward single switch control. The detector can be set up using either integral presets or by utilizing a separate handset for the more detailed functions. DETECTION RANGE DIAGRAM ON PAGE 26-27 Please note: Direct Dim detectors can control up to 20 dimming ballasts MULTI-SENSE DIMMIMG MICROWAVE PRESENCE DETECTOR NEW PRODUCT KEY FEATURES AND BENEFITS Absence Detection Enhanced energy saving Daylight linking Constant light level Dual output Flexible control Manual switch inputs User override Manual dimming Adjustable light output Integral setup Quick commissioning User handset (optional) Allows user to override the detector Scene setting User comfort APPLICATIONS School classrooms Colleges Universities Public buildings Retail Commercial offices MICROWAVE PRESENCE DETECTORS ORDER CODE DESCRIPTION LOAD RATING AT 230VAC TIME DELAY Resistive Incandescent Fluorescent Compact Fluorescent MWS-3DD Direct Dim microwave presence detector DSI/DALI 10A 10A 10A 10A 15 sec- 30 min DD-LCDHS Programming handset for Direct Dim detectors 10A 10A 10A 10A 15 sec- 30 min UHS UHS3 User handset override on/off, lux up, lux down User handset override on/off UK Patented. No. 0411069.8 Please note: For 1-10V analogue dimming applications refer to our website Cableplan T: +44 (0)20 8900 0671 Tel : 01 626 8888 19 22

MICROWAVE PRESENCE DETECTORS MWS-5 The cutting edge MWS5 series of compact microwave presence detectors are designed to optimise space within a luminaire. There are two sensor types available, the MWS5 which is designed specifically for mounting inside most luminaires and the MWS5/SA which can be mounted directly onto a wall or discretely on the ceiling. The flexibility of this sensor gives luminaire manufacturers and lighting designers the ability to incorporate presence detection into their design with ease. The unobtrusive nature of the sensor means the occupier of the space need not know the area is being controlled. COMPACT MICROWAVE PRESENCE DETECTOR NEW PRODUCT LUMINAIRE MOUNT The MWS5 has been designed to fit quickly into most types of luminaires. The presence detector consists of two parts: the sensor head and the power supply unit. The sensor head can be mounted in a number of positions depending on the type of luminaire: it can be mounted onto the gear tray cover using pre-moulded fixing lugs; a flange mounting receptacle allows the unit to be mounted onto the rear side of a diffuser; or the same receptacle enables the sensor head to be fixed through the front face of the fitting. The MWS5 can see through plastic so it can be incorporated into sealed fittings without the integrity of the fitting being compromised. The power supply unit, supplied in a low profile, ballast style housing, is mounted in the gear tray; power connections are push fit, whilst the sensor head is plugged in. Time, lux and sensitivity are adjusted easily via two discrete push buttons on the front of the sensor head. STAND ALONE (WALL OR CEILING) The MWS5/SA can be used as a stand alone presence detector. A flush fit ceiling clip allows the sensor head to be mounted into a ceiling tile; alternatively the sensor head can be mounted either on the wall or ceiling using the surface mount base plate. The power supply unit can be mounted remotely for easy access. APPLICATIONS Integrated into luminaires Schools Offices Toilets Universities Retail Industrial KEY FEATURES AND BENEFITS Reduced head size Unobtrusive Luminaire mounting Flexible Plug in connections Simple installation Wall or ceiling mount Versatile Adjustable Simple set up Dimming option Enhanced control Absence detection Manual ON, auto OFF Infrared control option User control over sensor Detects through plastic Maintains IP integrity Cableplan 20 Tel : 01 626 8888 23

LUMINAIRE MOUNTING ORDER CODE DESCRIPTION LOAD RATING AT 230VAC Incandescent Fluorescent Compact Fluorescent MWS5 Microwave sensor head MWS5-IR Microwave sensor head with IR override MWS5-D Microwave sensor head for 1-10V dimming output c/w IR MWS5-DSI Microwave sensor head for DSI/DALI output c/w IR MWS5-PSU Power supply unit 6A 6A 3A MWS5-PSU-D Power supply unit with 1-10V dimming output 6A 6A 3A MWS5-PSU-DSI Power supply unit with DSI/DALI dimming output 6A 6A 3A MICROWAVE PRESENCE DETECTORS UHS UHS3 User handset override on/off, lux up, lux down User handset override on/off Patents applied for STAND ALONE (WALL OR CEILING) ORDER CODE DESCRIPTION LOAD RATING AT 230VAC Incandescent Fluorescent Compact Fluorescent MWS5/SA MWS5-IR/SA MWS5-D/SA MWS5-DSI/SA Microwave sensor head stand alone Microwave sensor head with IR override stand alone Microwave sensor head with 1-10V dimming c/w IR stand alone Microwave sensor head with DSI/DALI dimming c/w IR stand alone MWS5-PSU/SA Power supply unit stand alone 6A 6A 3A MWS5-PSU-D/SA Power supply unit with 1-10V dimming output stand alone 6A 6A 3A MWS5-PSU-DSI/SA Power supply unit with DSI/DALI dimming output stand alone 6A 6A 3A UHS UHS3 User handset override on/off, lux up, lux down User handset override on/off Patents applied for Please note: the sensor head and power supply are ordered as seperate items Cableplan Tel : 01 626 8888 21 24

EMERGENCY LIGHTING TEST SWITCHES Emergency lighting test switches provide a cost effective solution to the testing of emergency luminaires. It is a requirement that all emergency luminaires are tested regularly so that an adequate level of illumination is given by the lamps under emergency conditions. This can be achieved by interrupting the supply to the luminaires at the distribution board. Self test fittings are available but these can be costly. Alternatively our range of test switches can be used to simplify testing by providing local automatic switching. APPLICATIONS EMERGENCY LIGHTING TEST SWITCHES Offices Schools Colleges Industrial Retail ELT10 AUTOMATIC KEY OPERATED EMERGENCY LIGHTING TEST This automatic key operated emergency lighting test switch is permanently wired to the emergency luminaire supply. The key switch is used to interrupt the supply for pre-programmed periods. At the end of the time period, the supply to the luminaires is automatically reinstated. The result is that there is no risk of depleting the batteries in the emergency fitting by leaving them connected for prolonged periods. The key switch ensures secure access. Test Periods: 10 minutes; 1 hour; 3 hours ORDER CODE DESCRIPTION RATING AT 230VAC Fluorescent Compact Fluorescent ELT10 Automatic emergency test switch 6A 3A Please note: A single ELT10 is suitable for switching one circuit, for multiple circuit applications see ELT- REL. Cableplan T: +44 (0)20 8900 0671 Tel : 01 626 8888 25

EMERGENCY LIGHTING TEST SWITCHES ELTD1 This automatic DIN rail mounting emergency lighting test switch is permanently wired to the emergency fitting supply. The automatic control is used to interrupt the supply for a pre-programmed period. At the end of the time period, the supply to the luminaires is automatically reinstated. The result is that there is no risk of depleting the batteries in the emergency fitting by leaving them connected for prolonged periods. This single DIN rail module device can be conveniently located at the distribution board or in a control panel. Test Periods: 10 minutes; 30 minutes; 1 hour; 3 hours DIN RAIL AUTOMATIC EMERGENCY LIGHTING TEST SWITCH ORDER CODE DESCRIPTION RATING AT 230VAC Fluorescent Compact Fluorescent ELTD1 Automatic DIN rail mounted emergency lighting test switch 6A 3A Please note: A single ELTD1 is suitable for switching one circuit, for multiple circuit applications see ELT- REL. ELT-REL The ELT-REL control box can be used with either of the automatic emergency lighting test switches to control multiple circuits. The unit is mounted in a plastic enclosure for ease of installation. A number of variants are available from 5 to 20 channels. EMERGENCY LIGHTING TEST SWITCH DISTRIBUTION BOX ORDER CODE DESCRIPTION RATING AT 230VAC PER CHANNEL Fluorescent Compact Fluorescent ELT-REL5 5 channel emergency lighting control box 6A 3A ELT-REL10 10 channel emergency lighting control box 6A 3A ELT-REL15 15 channel emergency lighting control box 6A 3A ELT-REL20 20 channel emergency lighting control box 6A 3A ELT-1 A plate mounted economy key switch provides a cost effective solution for the testing of emergency lighting. The circuit is interrupted using the secure key switch. The switch plate is manufactured in a high impact material making it suitable for installations where previously a metal finish may have been required. ECONOMY EMERGENCY LIGHTING TEST SWITCH ORDER CODE DESCRIPTION RATING AT 230VAC Fluorescent ELT-1 Economy key switch 10A Cableplan Tel : 01 626 8888 26

TIME LAG SWITCHES Time lag switches are a quick and effective way to reduce energy consumption for lighting applications. Pressing the button or touch pad brings the lights on; the lights will then switch off automatically after a time period has elapsed. Our range of time lag switches do not require a neutral connection, therefore they can easily replace an existing light switch. The duration of the time delay is set by a thumbwheel on the reverse of the unit. APPLICATIONS Stairwells Store cupboards Meeting rooms Corridors Entrance lobbies Suitable for new or retro-fit applications ELLIPSE Direct replacement for an existing light switch, making it a quick and inexpensive unit to install. The large push button makes it an ideal replacement for mechanical or pneumatic time lag switches. KEY FEATURES AND BENEFITS No neutral connection Multi way switching High rating Tamperproof Weatherproof option Replaces existing light switch All products 1 way, 2 way or intermediate switching Switches fluorescent and incandescent loads Lights turn off even if button wedged down For external lighting control 20 Minute time delay Ensures user safety Please note: For information on how to install our range of time lag switches for 1 way, 2 way and intermediate switching please refer to our technical section on page 49. These products are suitable for lighting loads only, some types of lighting may require the addition of a power factor correction capacitor. TIME LAG SWITCH TIME LAG SWITCHES ORDER CODE DESCRIPTION LOAD RATING AT 230VAC TIME DELAY Incandescent Fluorescent Compact Fluorescent ELLIPSE Push button time lag switch 10A 10A 10A 10secs - 20min approx ELLIPSE-TN Push button time lag switch c/w neon 10A 10A 10A 10secs - 20min approx UK Patented No. 2217933. T: +44 (0)20 8900 0671 5

TIME LAG SWITCHES THE KH RANGE TIME LAG SWITCH ES KH1 KH1N KH2 KH3 The KH range of time lag switches replaces existing light switches; there are a wide range of switch types available to suit a variety of applications. These include a push button, touch and a weatherproof version. ORDER CODE DESCRIPTION LOAD RATING AT 230VAC TIME DELAY Incandescent Fluorescent Compact Fluorescent KH1 Push button time lag switch 10A 10A 10A 10secs - 20min approx SLV1 Slave activator for KH1 KH1N Push button time lag switch c/w neon 10A 10A 10A 10secs - 20min approx SLV1N Neon slave activator for KH1N KH2 Touch activated time lag switch 10A 10A 10A 10secs - 20min approx KH2N Touch activated time lag switch c/w neon 10A 10A 10A 10secs - 20min approx KH3 Weatherproof time lag switch 10A 10A 10A 10secs - 20min approx KH3N Weatherproof time lag switch c/w neon 10A 10A 10A 10secs - 20min approx UK Patented No. 2217933. Please note: SLV1N requires a separate live and neutral connection 6 www.cpelectronics.co.uk

MULTI RANGE TIMERS Multi range timers are ideal for any application that requires an appliance to be switched on for a specific period of time. For example, to provide a 2 hour burst of heating or to run a fan on for 10 minutes. Available with different actuators, multi range timers have the flexibility to be used in a wide variety of environments. The powerful relay output makes the timer suitable for the control of loads from fluorescent lighting up to a 3KW heating load. All the products have adjustable time ranges. MULTI RANGE TIMERS The multi range timers have a selectable on/off mode which can be set at installation; in this mode pressing the actuator during timing turns the timer off. APPLICATIONS Lighting control Pump overrun Ventilation control Heating boost External control (weatherproof version) OPTIONS AVAILABLE Special timing all multi range timers are available with extended timing if required. Special voltages are available. Please contact our sales office for information. Where a neon indicator is not standard on the product it may be added to a special order. Permanent neon indicator for location purposes Temporary neon shows when timer is running Add either PN or TN to the part number. The standard product has a switched live output. Voltage free contact outputs are available to order on some models. KEY FEATURES AND BENEFITS Range of actuators Adjustable time delay Mounts on BS switch box Weatherproof option Voltage free contact versions Neon indicator version Please note: Suitable for variety of applications Flexibility Easy fixing Suitable for external applications Suitable for BMS and control applications Allows product to be located in the dark All multi range timers require a neutral connection. For wiring information please visit our web site at www.cpelectronics.co.uk. T: +44 (0)20 8900 0671 7

MULTI RANGE TIMERS MULTI RANGE PLATE MOUNTED TIMERS MRT16-PC MRT16-TA MRT16-PB/TN MRT16-WP 0 20 40 30 Permanent neon indicator for location purposes Temporary neon shows when timer is running ORDER CODE DESCRIPTION LOAD RATING AT 230VAC TIME DELAY Resistive Incandescent Fluorescent Compact Fluorescent MRT16-PB Push button timer 16A 10A 6A 3A 1 sec - 2 hrs MRT16-PB/VF Push button timer c/w voltage free contact 10A 10A 6A 3A 1 sec - 2 hrs MRT16-PB/TN Push button timer with temporary neon 16A 10A 6A 3A 1 sec - 2 hrs MRT16-PB/PN Push button timer with permanent neon 16A 10A 6A 3A 1 sec - 2 hrs MRT16-TA Touch activated timer 16A 10A 6A 3A 1 sec - 2 hrs MRT16-TA/VF Touch activated timer c/w voltage free contact 10A 10A 6A 3A 1 sec - 2 hrs MRT16-REM Remote activated timer 16A 10A 6A 3A 1 sec - 2 hrs MRT16-REM/VF Remote activated timer c/w voltage free contact 10A 10A 6A 3A 1 sec - 2 hrs MRT16-PC Pull cord timer 16A 10A 6A 3A 1 sec - 2 hrs MRT16-PC/VF Pull cord timer c/w voltage free contact 10A 10A 6A 3A 1 sec - 2 hrs MRT16-WP Multi range weatherproof timer 16A 10A 6A 3A 1 sec - 2 hrs MRT16-WP/TN Multi range weather proof timer with temporary neon 16A 10A 6A 3A 1 sec - 2 hrs SLV1 SLV1N SLV1/PC Push button slave actuator Push button slave actuator with neon Pull cord slave actuator 8 www.cpelectronics.co.uk

RBT2 The RBT2 is a high output electronic timer which provides effective control for a variety of loads. The unit allows an appliance to be powered for a set time period which can be adjusted by the user. A simple LED display indicates how much time is left to run, and its Night Light feature illuminates all the LEDs when the unit is not in use to allow ease of location in the dark. Pressing and releasing the switch whilst the unit is in operation allows the user to cancel the timing. A memory function remembers the last timing selected. NEW PRODUCT HEATER BOOST TIMER MULTI RANGE TIMERS 0 20 40 30 APPLICATIONS Lighting control Panel heaters Student accommodation Schools Workshops Retail Hotels KEY FEATURES AND BENEFITS High rating LED indicator User adjustable timing Night Light Memory time function Switches resistive, fluorescent and inductive loads Gives indication of remaining run time Flexible time setting Easy location in the dark Remembers last time setting ORDER CODE DESCRIPTION LOAD RATING AT 230VAC TIME DELAY Resistive Incandescent Fluorescent Compact Fluorescent RBT2 Plate mounted adjustable boost timer 16A 10A 6A 3A 15mins - 2 hours user adjustable T: +44 (0)20 8900 0671 9

PIR SWITCHES PIR SWITCHES The CP Electronics range of passive infrared occupancy switches are designed for the automatic control of lighting,heating and ventilation loads. They operate by turning the load on only when an area is occupied; after the occupant has left the area the load will automatically turn off. An integral, adjustable time delay ensures that the unit stays switched on, even when the occupant is momentarily still. When used to control lighting loads, an optional photocell can be used to keep the lights off in bright conditions. All models can be mounted onto a British Standard switch box for ease of installation. APPLICATIONS Offices Toilets Meeting rooms Factories Workshops Retail Residential Schools Hotels Student accommodation KEY FEATURES AND BENEFITS PIR detection Relay output Integral time delay Mounts on BS switch box Integral photocell option Ceiling mount option No neutral version Voltage free contact option Increased energy saving Suitable for lighting, heating and ventilation loads Keeps load on until area is vacated Easy fixing Keeps lighting load off in bright conditions Flexible mounting Fast fitting, available on PDS and PDS/OV only Suitable for BMS and control applications Please note: With the exception of the PDS and PDS/OV, all of the PIR switches require a neutral connection. Please note: With the exception of the PDS and PDS/OV, the CP Electronics range can be supplied at different supply voltages. 10 www.cpelectronics.co.uk

PDS The PDS is a low cost, fast fit presence detector. A built in light level sensor can be set to keep lights off if there is sufficient natural light. The product does not require a neutral connection so it can quickly replace an existing light switch. An optional override facility allows the following functions: the lights can be turned off for example during a presentation or at night in a bedroom the lights can be turned on even if there is sufficient natural light, and then automatically turn off when occupancy has ceased. The PDS-ABS/OV product functions as an absence detector. The lights do not turn on automatically, only when the override button is pressed, after which the lights will turn off automatically when occupancy has ceased. NO NEUTRAL WALL MOUNTED PRESENCE DETECTOR PIR SWITCHES DETECTION RANGE DIAGRAM ON PAGE 44 KEY FEATURES AND BENEFITS Low cost No neutral connection Shallow design Integral light sensor Adj. 1 hour timing With or without override Multi-way switching Relay output Detection pattern Quick payback Use with existing wiring Will fit low profile BS switch boxes Keeps lights off if there is enough natural light User comfort Allows user control 1 way 2 way or intermediate switching Capable of switching up to 5A of fluorescent lighting Up to 9 metre coverage Please note: PDS/OV is the model shown in the photograph. ORDER CODE DESCRIPTION LOAD RATING AT 230VAC TIME DELAY Incandescent Fluorescent Compact Fluorescent PDS No neutral presence detector 10A 5A 3A 5min - 1hr PDS/OV No neutral presence detector c/w override 10A 5A 3A 5min - 1hr PDS-ABS/OV No neutral absence detector 10A 5A 3A 5min - 1hr T: +44 (0)20 8900 0671 11

PIR SWITCHES SPIR The SPIR range of passive infrared switches are mounted on a single gang white switch plate with a rugged domed lens housing the detector, which gives up to a 9m coverage. They are easy to install onto a standard flush or surface mounting British Standard switch box. Significant energy saving can be achieved when used to control electrical equipment such as: Lighting - including fluorescent and compact fluorescent Electric heating - either directly or via the heater control circuit Ventilation - fans for toilets and washrooms WALL AND CEILING MOUNTED PASSIVE INFRARED SWITCH OPTIONS AVAILABLE With or without integral light sensor. Voltage free contact option for use with BMS and control applications. Special voltages available. Please contact our sales office for information. DETECTION RANGE DIAGRAM ON PAGE 44 Please note: Requires a neutral connection. 0 20 40 30 ORDER CODE DESCRIPTION LOAD RATING AT 230VAC TIME DELAY Resistive Incandescent Fluorescent Compact Fluorescent SPIR-F Wall mount PIR switch 16A 10A 6A 3A 10secs - 1hr SPIR-LSF Wall mount PIR switch c/w light level sensor 16A 10A 6A 3A 10secs - 1hr SPIR-FVF Wall mount PIR switch with voltage free contact 10A 10A 6A 3A 10secs - 1hr 12 www.cpelectronics.co.uk

HEATING AND VENTILATION CONTROLS Our range of HVAC controls are designed to reduce energy consumption when used in conjunction with heating and ventilation loads. They are designed to be simple to install and easy to use thereby reducing installation cost and reducing payback time. APPLICATIONS Student accommodation Schools Offices Hotels Domestic Retail Industrial ENERSTAT-T This electronic thermostat accurately controls room heating to optimise energy consumption whilst maintaining comfortable temperatures. The powerful output relay directly switches heavy loads such as electric panel heaters. The ENERSTAT-T can be set with two temperature levels. The lower, or setback level, is the background temperature that is maintained to keep an acceptable level of warmth, preventing frost and allowing the room to heat up quickly when required. The higher, comfort or boost level provides a comfortable temperature level when the room is occupied. Switching between the setback and boost temperature is achieved by tapping the front plate of the switch. After a predetermined time the heater returns to maintaining the setback temperature. 0 20 40 30 KEY FEATURES AND BENEFITS Easy to install Simple to operate Low capital cost Adjustable Low installation cost User comfort Fast payback Flexibility OPTIONS AVAILABLE TOUCH OPERATED THERMOSTAT Reverse operation for air conditioning applications. Custom temperature ranges available to order. HVAC CONTROLS ORDER CODE DESCRIPTION RATING AT 230VAC Resistive (heating) Inductive ENERSTAT-T Touch operated thermostat heating 16A 6A ENERSTAT-T/C Touch operated thermostat cooling 16A 6A TEMPERATURE AND TIME SETTINGS SETBACK LEVEL BOOST LEVEL TIME SETTING ENERSTAT-T Heating thermostat 5 to 20 C 10 to 30 C 30secs to 4hrs ENERSTAT-T/C Cooling thermostat 25 to 40 C 15 to 35 C 30secs to 4hrs T: +44 (0)20 8900 0671 37

HVAC CONTROLS ENERSTAT-PIR This electronic thermostat accurately controls room heating to optimise energy consumption whilst maintaining comfortable temperatures. The powerful output relay directly switches heavy loads such as electric panel heaters. The ENERSTAT-PIR can be set with two temperature levels. The lower, or setback level, is the background temperature that is maintained to keep an acceptable level of warmth; preventing frost and allowing the room to heat up quickly when required. The higher, comfort or boost level provides a comfortable temperature level when the room is occupied. Switching between the setback and boost temperature is achieved when an occupant is detected in the room. At a predetermined time after detection has ceased, the heater returns to maintaining the setback temperature. DETECTION RANGE DIAGRAM ON PAGE 44 0 20 40 30 OPTIONS AVAILABLE PIR ACTIVATED THERMOSTAT Reverse operation for air conditioning applications. Custom temperature ranges available to order. ORDER CODE DESCRIPTION RATING AT 230VAC Resistive (heating) Inductive ENERSTAT-PIR PIR activated thermostat heating 16A 6A ENERSTAT-PIR/C PIR activated thermostat cooling 16A 6A TEMPERATURE AND TIME SETTINGS SETBACK LEVEL BOOST LEVEL TIME SETTING ENERTAT-PIR Heating thermostat 5 to 20 C 10 to 30 C 30secs to 4hrs ENERSTAT-T/C Cooling thermostat 25 to 40 C 15 to 35 C 30secs to 4hrs TH ELECTRONIC ROOM THERMOSTAT The TH electronic room thermostat gives accurate temperature control for most types of heating systems. It provides an alternative to less accurate mechanical thermostats. Please note: This product requires a live and neutral connection. 0 20 40 30 ORDER CODE DESCRIPTION RATING AT 230VAC TEMPERATURE SETTINGS Resistive Inductive TH-555 Basic electronic room thermostat 7A 3A 5 to 30 C 38 www.cpelectronics.co.uk

HD The HD electronic room thermostat gives accurate temperature control for most types of central heating systems. The battery powered HD has an LCD display which clearly shows current room temperature and target temperature. The unit is adjusted up or down using the two buttons on the facia. The latest technology provides a very close switching differential from set temperature of +/- 0.5 C. DIGITAL ROOM THERMOSTAT HVAC CONTROLS 0 20 40 30 ORDER CODE DESCRIPTION RATING AT 230VAC TEMPERATURE SETTINGS Resistive Inductive HD-210 Digital room thermostat 5A 2A 5 to 30 C HP DIGITAL PROGRAMMABLE THERMOSTAT The HP digital programmable thermostat is a stylish, compact programmable room control. It has all the standard features of the digital room thermostat with the added advantage of user adjustable start times and temperature levels over a 7 day period. This gives the occupant total control over the heating system increasing comfort and reducing energy consumption. KEY FEATURES Stylish housing Preset 7 day programs Easy programming Temperature override Time, room and set temperature display Holiday mode 0 20 40 30 ORDER CODE DESCRIPTION RATING AT 230VAC TEMPERATURE SETTINGS Resistive Inductive HP-510 Programmable digital room thermostat 6A 2A 5 to 30 C T: +44 (0)20 8900 0671 39

HVAC CONTROLS RBT The RBT run back timer is a high output electronic timer which provides control for a wide range of loads. Its powerful 20A output makes it particularly suitable for the control of immersion heaters. The unit allows an appliance to be powered for a set time period which can be adjusted by the user. A simple display shows the user how much time is left to run. An ON/OFF switch allows the user to cancel the timing program whilst a memory remembers the last timing sequence selected. HIGH OUTPUT RUN BACK TIMER 0 20 40 30 ORDER CODE DESCRIPTION RATING AT 230VAC TIMINGS Resistive Inductive RBT1 High output run back timer 20A 6A 0-2 hrs adjustable in 15 minute increments JMH ELECTRONIC HUMIDISTATS This range of electronic humidistats provides accurate humidity control for ventilation, humidifying and dehumidifying equipment. The humidistat constantly monitors ambient humidity. When the humidity exceeds the set point by more than 4% the relay output will change over. When the humidity drops below the setpoint by more than 4% the output changes back. An integral time delay can be used for ventilation applications as an overrun timer. Two versions are available, one with external humidity setting and one with internal humidity setting. 0 20 40 30 ORDER CODE DESCRIPTION RATING AT 230VAC HUMIDITY RANGE HUMIDITY ACCURACY TIMINGS Resistive Inductive JMHC-1E Electronic Humidistat with external control 10A 6A 30-90% relative humidity +/-5% relative humidity 30secs to 30mins JMHC-1C Electronic Humidistat with internal control 10A 6A 30-90% relative humidity +/-5% relative humidity 30secs to 30mins 40 www.cpelectronics.co.uk

LIGHT LEVEL CONTROLS Light level controls provide a cost effective and simple solution to energy saving. Our range provides a choice of control methods. One type of product switches the lighting on and off according to ambient light levels. The other product type regulates the light output of the fitting according to ambient conditions (when used with a suitable dimming fitting). Our range is suitable for controlling internal or external lighting. APPLICATIONS Schools Universities Hotels Retail Industrial Offices Signs ALC15 TWILIGHT SWITCH HVAC CONTROLS The ALC15 twilight switch will turn lighting on when the ambient light falls below a preset level. The lighting will then be turned off either when the light exceeds the preset level or after a preset time delay. For example, they can be used to switch external security lights at night or to turn on display or sign lighting. The unit has a highly accurate adjustable photocell; a selectable time delay; adjustable switching differential and is mounted in a vandal resistant IP66 enclosure. ORDER CODE DESCRIPTION LOAD RATING AT 230VAC TIME DELAY Incandescent Fluorescent Compact Fluorescent ALC15 Twilight switch 8A 6A 3A 0-16 hrs T: +44 (0)20 8900 0671 41

LIGHT LEVEL CONTROLS ALC30 The ALC30 twilight switch will turn lighting on when the ambient light falls below a preset level. The lighting will then be turned off either when the light exceeds the preset level or after a preset time delay. The unit is mounted in a directional ceiling housing which allows the unit to take accurate measurement of the ambient light either internally on the working plane or externally by looking through a window. The unit has a highly accurate adjustable photocell, a selectable time delay, and adjustable switching differential. CEILING MOUNTED PHOTOCELL ORDER CODE DESCRIPTION LOAD RATING AT 230VAC TIME DELAY Incandescent Fluorescent Compact Fluorescent ALC30 Ceiling mounted photocell 8A 6A 3A 0-16 hrs ALC45 DIMMING CEILING MOUNTED PHOTOCELL The ALC45 dimming ceiling photocell automatically adjusts the light output of the luminaire depending on the amount of natural light available to maintain a constant brightness. To enhance user comfort an adjustable time period determines how quickly the output reacts to changing light levels. The unit is mounted in a discreet ceiling housing and is available with either a 1-10V analogue output or a DSI output. ORDER CODE DESCRIPTION RATINGS ALC45D Dimming photocell 1-10V output 10 ballasts ALC45DSI Dimming photocell with digital DSI output 10 ballasts This shows the ALC30 or ALC45 in the flush position.for fixing detail refer to page 18. 42 www.cpelectronics.co.uk

TIME SWITCHES A range of DIN rail mounting digital time switches, which provide accurate timing sequences for domestic, commercial and industrial applications. APPLICATIONS Domestic Display lighting Sign lighting Panel building Heating and air conditioning Security switching TH General purpose DIN rail time switch for daily and weekly programs, mounted in a 2-module width housing. KEY FEATURES LED indicator Clear LCD display 8 ON/OFF programs ON/OFF/AUTO override 200 hours battery reserve Protective transparent cover Simple programming DIGITAL DIN RAIL TIME SWITCH 0 40 20 30 LIGHT LEVEL CONTROLS ORDER CODE DESCRIPTION RATING AT 230VAC Resistive Inductive TH-857 Single channel DIN rail time switch 16A 8A TH General purpose 2-channel DIN rail timer for daily and weekly programs mounted In a 4 module width housing. KEY FEATURES LED indicator Clear LCD display 4 ON/OFF programs on channel 1 3 ON/OFF programs on channel 2 ON/OFF/AUTO override 200 hours battery reserve Protective transparent cover Simple programming 2 CHANNEL DIN RAIL TIME SWITCH 0 40 20 30 ORDER CODE DESCRIPTION RATING AT 230VAC Resistive Inductive TH8572 2 channel DIN rail time switch 16A 8A T: +44 (0)20 8900 0671 43

TIME SWITCHES DETECTION PATTERNS PASSIVE INFRARED (PIR) SENSORS WALL MOUNTED PART NUMBERS SPIR-F SPIR-LSF SPIR-FVF PDS PDS/OV PDS-ABS/OV ENERSTAT-PIR Cableplan 44 Tel : 01 www.cpelectronics.co.uk 626 8888 27

CEILING MOUNTED (PIR S) PART NUMBERS EBSDSPIR EBDSPIR-IR EBDSPIR-L3 EBDSPIR-IR-L3 EBDSPIR-DD SPIR-F/C VITB-PD VITB-PD/IR VITP-PD VITP-PD/IR EBR-CPIR TECHNICAL INFORMATION MICROWAVE PRESENCE DETECTORS WALL MOUNTED PART NUMBERS MWS-1 MWS-1/LUX MWS-1/FVF MWS-1/FVF/LUX MWS-1/IP MWS-1/IP/LUX Cableplan Tel : 01 626 8888 45 28

TECHNICAL INFORMATION CEILING MOUNTED (SQUARE PLATE MICROWAVE) PART NUMBERS MWS-1/C MWS-1/C/LUX MWS-1/C/IP MWS-1/C/IP/LUX CEILING MOUNTED (CIRCULAR MICROWAVE) PART NUMBERS MWS-3 MWS-3-L3 MWS-3DD MWS-3/ABS MWS-3-L3/ABS VITB-MWS3 VITP-MWS3 VITP-MWS3D EBR-MWS3 SENSITIVITY SET TO MAXIMUM AND SENSOR HEAD POSITION SET AT 80 1 m Cableplan Tel : 01 626 8888 29

CEILING MOUNTED (CIRCULAR MICROWAVE) CONTINUED 16 m TECHNICAL INFORMATION 10 m Cableplan Tel : 01 626 8888 30

TECHNICAL INFORMATION COMPACT MINIATURE MICROWAVE PRESENCE DETECTOR PART NUMBERS ALL MWS-5 VARIANTS CEILING MOUNTED WALL MOUNTED Cableplan Tel : 01 www.cpelectronics.co.uk 626 8888 31