About PVE Pneumatic Vacuum Elevators General Information PVE Europe is the European headquarters of Pneumatic Vacuum Elevators, LLC, the designer and manufacturer of pneumatic vacuum elevators based in Medley, FL, USA. We are an innovative, technology-based company that has revolutionized how people and goods may be vertically transported within residential, marine and stage environments. Through the application of fundamental physics and the utilization of attractive materials, Pneumatic Vacuum Elevators has virtually created a transportation vehicle within a bubble. Many go as far as to say it is A Work of Art. Founded in 2002, in Miami, Florida, the Company proudly manufactures three versions of its vacuum elevators, ranging from single to a three-passenger, wheelchair-accessible model. Rather than using cables or pistons, PVE manufactures the only elevator that is powered by one of the most abundant resources in the world AIR! Due to its minimal footprint, rapid installation and a unique panoramic design, the vacuum elevators go where other elevators simply cannot. PVE maintains an expanding network of more than 160 authorized dealers with 7,000+ units installed worldwide. www.vacuumelevators.eu
Operation Pneumatic Vacuum Elevators General Information Our vacuum elevators operate under the principles of pneumatics and vacuum, both different but related, which together result in pneumatic vacuum technology, which gives the name to our home lifts. Pneumatic (Greek πνεûμα air ) is the technology that uses air as a mode of transmission of energy to move and function mechanisms, in our case the car of our vacuum elevators. Vacuum (Latin vacīvus) is described as a closed cavity where air pressure or other gases are less than atmospheric pressure. LOW PRESSURE But how are these two principles applied in our vacuum elevators? The pneumatic vacuum elevator is formed by a cylindrical vertical shaft, and a car which moves inside. For ascending operations, the vacuum system (4) on the top of the elevator, draws air from above the seal of the car on the interior of the cylinder (1) creating a low pressure area (3) located above the cabin seal (2). At the same time, atmospheric pressure (greater than the low pressure system above the cabin seal) enters into the ground floor cylinder through holes/perforations on the ground floor cylinder panels, furthermore creating lift. To descend, there is a valve inside the vacuum motor system (4) that regulates the entry of air into the cylinder restoring pressure, lowering the car smoothly without consuming energy, also making the vacuum elevator an ecofriendly lift. PVE Operation video: http://youtu.be/yab8urnxsho ATMOSPHERIC PRESSURE 1. ATMOSPHERIC PRESSURE ZONE 2. CABIN SEAL 3. LOW PRESSURE ZONE 4. VACUUM PUMP
Vacuum Motor Configurations Pneumatic Vacuum Elevators General Information VACUUM MOTOR CONFIGURATIONS The vacuum system is the engine and machinery through which this residential elevator functions. Currently vacuum elevators are installed in two different vacuum motor configurations: Head Unit - Standard Split Unit In the head unit configuration, the vacuum system is located directly on top of the upper floor vertical cylinder of the pneumatic vacuum elevator. The electrical control panel is inside, and the only installation requirements are to connect to a 220v outlet near the machinery. This format is best in homes that have sufficient height on the top floor (Minimum height for installation 2700mm) vacuum pump low pressure zone cabin seal ceiling/floor perforation PVE30 = 810mm PVE37 = 990mm PVE52 = 1390mm atmospheric pressure zone 2700mm ceiling/floor perforation PVE30 = 810mm PVE37 = 990mm PVE52 = 1390mm vacuum pump s box split 840mm x 450mm x 680mm 110mm diameter PVC pipes 2450mm In the split unit configuration, the vacuum system is located in a split box that can be installed at a distance of 10 meters from the top of the vacuum elevator. The split system piping is connected to the top of the cylinder via two 110mm diameter PVC pipes. The electric control panel can be mounted externally as any electrical box (hanging on the wall, wardrobe ). There is also the possibility of placing a false head on to locate the electrical box and the PVC pipes are connected. atmospheric pressure zone 2340mm This format is required when the height of the top floor is less than 2700mm (Minimum height for split installation 2450mm).
Models Pneumatic Vacuum Elevators General Information PVE30 (750) PVE37 (933) PVE52 (1316) Ø ext: 750 Ø ext: 933 Ø ext: 1316 Ø int: 640 Ø int: 820 Ø int: 1210 Single passenger Two passenger Three passenger
Benefits of Vacuum Elevators Pneumatic Vacuum Elevators General Information No machine room required Vacuum elevators are self-supporting and take up only as much space as the elevator shaft. They are the only elevators that are installed directly on the existing floor and do not require a machine room, shaft, or pit, making it a clean, quick and easy installation. There is no extra machine room, no heavy equipment, and no need for dramatic remodeling of the home. As far as home elevators go, vacuum elevators provide the most utility with the smallest footprint. No pit excavation Installation directly on the existing floor. Ideal for new and existing homes
Benefits of Vacuum Elevators Pneumatic Vacuum Elevators General Information Installation within one to two days No Heavy Equipment. Everything required to raise and lower the car in a PVE is contained in the elevator shaft. This means there are no pulleys, wires, cables, or weights to conceal. Because there s no need for heavy equipment, our elevators feature near 360-degree views from inside the lift. Light into your home is not blocked by the PVE, and its clean look makes these elevators a perfect fit for classic and modern homes alike. Modern and Elegant Design Panoramic. Allows 360º visibility without cables or pistons that block vision Calle Bronce C/ Bronce Nro Nro 30-31 30-31 Nave Nave 3 3 Polígono Polígono Ind. Ind. Gestesa Gestesa 28890 28890 Loeches, Madrid Madrid (ESPAÑA) (SPAIN) Telephone Teléfono / fax: +34 91 886 75 39 Mobile: Móvil: +34 608 502 217 www.ascensoresneumaticos.es www.vacuumelevators.eu info@ascensoresneumaticos.es info@vacuumelevators.eu
Benefits of Vacuum Elevators Pneumatic Vacuum Elevators General Information Minimal Maintenance Our vacuum elevators do not require frequent maintenance or the storage of hazardous chemicals. PVE s lifts need attention only once every four to five years or every 15,000 rides. Additionally, the maintenance our elevators require is just a quick replacement of the main seal nothing fancy or complicated. PVE elevator runs smoothly without the need of constantly replacing or adding additional components. Our vacuum elevators are CE marked and meet the legal requirements and technical security of the Member States of the European Union. In the event of a power failure, the vacuum elevator cab automatically descends to the lower level and the electromechanical door opens to allow passenger exit. Vacuum elevators have mechanical safety brakes which come into action only if an extreme circumstance arises as a result of the detection of loss of vacuum over the top seal. Absolute Safety Powered by one of the most abundant resources in the world AIR! Calle Bronce C/ Bronce Nro Nro 30-31 30-31 Nave Nave 3 3 Polígono Polígono Ind. Ind. Gestesa Gestesa 28890 28890 Loeches, Madrid Madrid (ESPAÑA) (SPAIN) Telephone Teléfono / fax: +34 91 886 75 39 Mobile: Móvil: +34 608 502 217 www.ascensoresneumaticos.es www.vacuumelevators.eu info@ascensoresneumaticos.es info@vacuumelevators.eu
PVE30 White (Standard Color) Staircase & Through floors
PVE37 Navy Gray (Standard Color) Apartment. Balcony and landing accommodation
PVE37 Light Gray (Special Color) Installation through floors
PVE52 Black (Special Color) Commercial application. Installation through floors
PVE52 Taupe (Special Color) Head Unit. Staircase, balcony & through floors
Pneumatic Vacuum Elevators and Lifts S.L. C/ Bronce Nro 30-31 Nave 3 Polígono Ind. Gestesa 28890 Loeches, Madrid (SPAIN) Telephone / fax: +34 91 886 75 39 Mobile: +34 608 502 217 www.vacuumelevators.eu info@vacuumelevators.eu More information at www.vacuumelevators.eu