es k a M sty 2 TaDogs Hot
Please read all instructions carefully and retain for future reference. LET S BEGIN Remove the appliance from the box. Remove any packaging from the appliance. Place the packaging inside the box and store or dispose of safely. LET S SEE WATCHA GOT Hot dog maker Removable hot dog chamber Tongs Instruction manual COOL CHARACTERISTICS 650 W power Makes two hot dogs at any one time Variable timer control Separate hot dog slots Auto pop-up Removable crumb tray for easy cleaning Cool touch housing SAFE & SOUND When using electrical appliances, basic safety precautions should always be followed. Check that the voltage on the rating plate matches your local network before connecting to the mains power supply. Children aged from 8 years and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this appliance, only if they have been given supervision. Children should not play with the appliance. Unless they are older than 8 and supervised, children should not perform cleaning or user maintenance. This appliance contains no user serviceable parts. If the power supply cord, plug or any part of the appliance is malfunctioning, or if it has been dropped or damaged, only a qualified electrician should carry out repairs. Improper repairs may place the user at risk of harm. Keep the supply cord away from heat or sharp edges that could cause damage. Keep the appliance and power supply cord out of reach of children. This appliance should not be operated by means of an external timer or separate remote control system. Don t immerse the appliance in water or any other liquid. Don t touch the appliance during use, as it will get very hot and could cause injury. Don t use the appliance after a malfunction or if it has been dropped or damaged. Don t leave the appliance unattended whilst connected to the mains power supply. Don t remove the appliance from the mains power supply by pulling the cord; switch it off and remove the plug by hand. Don t leave the appliance unattended whilst it is in use. Don t attempt to move the appliance during use. Don t use the appliance for anything other than its intended use. Don t use the appliance outdoors. Don t use metal utensils with this appliance; use only plastic or wooden utensils to avoid damaging the non-stick surface. Always unplug the appliance after use and before any cleaning or maintenance. Hot Dog Maker 3
IT S HOT DOG TIME Always use the appliance on a stable, heatresistant surface. Ensure that the appliance has cooled fully after use, before cleaning or storing away. Use of an extension cord with the appliance is not recommended. This appliance is intended for domestic use only. It should not be used for commercial purposes. Caution: Never insert any sharp or metal objects into the appliance to remove trapped food. If food becomes trapped, unplug the appliance, leave it to cool fully and use a wooden or plastic utensil to gently ease out the trapped food, being careful to avoid touching the heating elements. ALL OF THE BITS Removable hot Lever dog chamber (internal) Cancel button Tongs Variable temperature control Before using your hot dog maker for the first time, clean it with a soft, damp cloth and dry thoroughly. Note: When using your hot dog maker for the first time a slight odour may be emitted; this is normal and will soon subside. Ensure that there is sufficient ventilation around the hot dog maker. MAKING DELICIOUS HOT DOGS Your hot dog maker is designed to hold two standard size hot dogs and two standard size bread rolls only. Don t use jumbo size hot dogs or bread rolls, as, despite being able to fit into basket initially, they will swell with the heat when the hot dog maker is operating and may jam. Not all hot dogs and bread rolls are the same, therefore you will need to adjust the variable heat controller accordingly. To begin using your hot dog maker, first plug it into the mains power supply. Place two hot dogs into the hot dog chamber, carefully open the two hot dog rolls and place them into the semicircle openings. Adjust the heat control to the required setting and push the lever down. After the toasting time is completed, the chamber and bread roll compartment will automatically pop-up. Press the Cancel button at anytime during the cooking process to manually stop the hot dog maker from cooking the hot dogs and bread rolls. Use the tongs provided to remove the hot dogs and bread rolls. If the hot dogs get jammed into the basket, let them cool until they contract, then remove them. 4 Hot Dog Maker
Note: Room temperature hot dogs will cook faster than those just taken straight from the fridge, so the variable heat controller will need to be adjusted accordingly. Don t use frozen hot dogs; ensure that you thaw them thoroughly before using the hot dog maker. Caution: Don t remove the hot dog chamber straight after use, as it will be very hot. Wait for it to cool fully before removing. Unplug your hot dog maker from the mains power supply. Once cool, carefully remove the chamber and the crumb tray to clean it. KEEPING YOUR HOT DOG MAKER IN APPLE PIE ORDER The power supply cord can be stored compactly in the power supply cord storage compartment. Store in a cool, dry place. SPECIFICATIONS Product code: EK1545 Input: 220-240 V~ 50 Hz Output: MAX 650 W Always unplug your hot dog maker from the mains power supply before attempting any cleaning or user maintenance. Ensure that your hot dog maker has completely cooled before cleaning, as it gets very hot during use. Clean the hot dog maker with a soft, damp cloth and dry thoroughly. Remove the hot dog chamber and crumb tray, wash in warm soapy water, then rinse and dry thoroughly. Don t use harsh or abrasive scourers to clean your hot dog maker as these will damage the surfaces. Warning: Never immerse your hot dog maker in water or any other liquid. Remove any crumbs by cleaning the crumb tray regularly. STORING YOUR HOT DOG MAKER AWAY Before storing, ensure that your hot dog maker has cooled and dried fully. Never store the hot dog maker whilst it is wet. Hot Dog Maker 5
CD031213/MD000000/V1