AEROSOLS Formulating the Future GC Electronics has been the primary supplier of electronics to the electrical and electronic industry since 9. In 997, GC upgraded its technology base to include the new environmental laws. GC has come up with a starting line-up of contact cleaners to comply with these laws; Big Bath, and Big Bath ISO. Big Bath ISO is a new contact cleaner that is non-ozone depleting and can be sold to anyone. Plus, it contains no CFC's or HCFCS and is safe on all plastics. GC a complete line of chemicals for use by electronics, electrical and industrial users. In addition to the most up-to date line of aerosols, GC also supplies non-aerosols. GC also a broad range of adhesives, heat sink compounds, lubricants and conformal coatings. Air Jet Freeze Mist Air Jet is formulated for the dusting and cleaning of components and equipment. Air Jet contains no additives. This high pressure product is used for blowing dust, dirt and residue out of hard to reach places without scratching. Air Jet is an excellent product for both home and use. Applications: Computers, keyboards, printers, fax machines, audio equipment, video equipment, typewriters. Air Jet contains no ozone depleting chemicals. Anti static formulation minimizes the risk of electrostatic damage to sensitive components. Freeze Mist is a refrigerant spray used to locate thermal intermittents in electronic components such as capacitors, resistors and semi-conductors. Great for removing chewing gum from fabrics, freezing adhesives for easy removal, protecting heat sensitive components during soldering or for thermal metal parts. The control trigger nozzle enables the user to apply the product with pinpoint accuracy and reduce product usage. Applications: Avionics, electronic equipment, computers. Freeze Mist contains no ozone depleting chemicals. The anti static formulation minimizes the risk of electrostatic damage to sensitive components. 9-858 9-8475- 9-8475 9-8475-SF 9-84- 9-84 9-84-SF 8 oz. Aerosol oz. Aerosol 2 oz. Aerosol 2 oz. Anti-Static Aerosol oz. Aerosol 2 oz. Aerosol 2 oz. Anti-Static Aerosol NON-AEROSOL CLEANERS Isopropyl Alcohol (Anhydrous) Forumula Does an excellent job of dissolving and removing oxides from recording heads, also an excellent degreaser. This is not an aerosol. Suggested for use with swabs, clean cloth, or by immersion or trigger sprayer. -57-A -57-AG -57-A6G 44 6 oz. gal. 6 gal. Phone (85)6-98 Fax (85)6-98
HYDROCARBON PRODUCTS Big Bath ISO does not deplete the ozone layer. Safe on all plastics. Contains no HCFC s. Cleans and restores relays, controls, switches, etc. Removes oil, dust and other contaminants. Leaves no residue. For use on de-energized equipment. Flammable. 9-94-A 9 oz. Aerosol Big Bath Contact Cleaner and Degreaser Big Bath Cleaner and Degreaser is an general purpose excellent cleaner/degreaser. The product is non-ozone depleting (contains no HCFC's or CFC's). It is a replacement for cleaner/degreasers containing HCFC 4b. Big Bath Cleaner and Degreaser will dissipate moisture and is safe on some plastics. Applications: General cleaning and degreasing applications, electronic and electrical equipment. Test for compatibility with sensitive plastics. Incompatible with ABS, PS, and Lexan. Can be used on energized circuits. Environmental Data: CFC: % HCFC: % ODP: VOC: 58% 9-95 2 oz. Aerosol 9-96 6 oz. Aerosol Big Bath ISO Bath Consists of hydrocarbon solvents, safe for use on most materials. It possesses a balanced ratio of cleaning solvents for lubricating and protecting ingredients. Contains silicone oils which will not oxidize and will remain active as protective coating and lubricating agent for years, even under adverse environmental conditions such as high humidity and contaminated atmosphere. One of the most universal and safe contact cleaners and may be used on all rotating and sliding contacts in any types of switches or controls. 9-68-A 9-64-A oz. Aerosol GC Bath Contact Cleaner/Degreaser for De-Energized Equipment GC Bath is formulated as a heavy duty cleaner/degreaser. Exceptional performance can be expected where heavy buildups of grease, oil, dirt, grime, adhesive, and other unwanted substances are encountered. Test for compatibility with sensitive plastics. GC Bath is formulated with no chlorinated solvents and thus has no ozone depleting chemicals. No CFC s. No HCFC s. 9-724-A 9-725-A oz. Aerosol Big Bath Contact Cleaner Big Bath Contact Cleaner is the replacement choice for HCFC 4b cleaners (contains no HCFC's or CFC's). It is nonozone depleting, and is safe on some plastic. This non-residue cleaner is on switches, PC boards, motors, electrical and electronic components. Big Bath helps dissipate moisture, and is fast drying. Applications: Can be used on live circuits, including switches, relays, controls PC boards, motors, electrical and electronic components. Test for compatibility with sensitive plastics. Incompatible with ABS, PS, and Lexan. Environmental Data: CFC: % HCFC: % ODP: VOC: 56% 9-97 6 oz. Anti-Static Aerosol For the latest information www.gcelectronics.com 45
HYDROCARBON PRODUCTS (Cont.) DE-OX-ID Solventless, light oil based contact treatment compound with active ingredients to counteract oxidation. Lowers contact resistance, inhibits arcing, lubricates and protects against corrosion. For use on connectors, sockets, potentiometers, switch contacts, battery connections, telescoping antennas, relay and thermostat contacts. Should be applied sparingly (e.g. with a toothpick or a hypodermic needle injector) on dirty, dusty and heavily oxidized contacts. Precleaning with a solvent type cleaner is recommended. Best results are obtained with small amounts. 9-92 9-96-A 46 2 oz. Bottle Phone (85)6-98 Fax (85)6-98
CHEMICAL SPECIFICATION MATRIX (Cont.) Potting Compound Specifications 9-82 9-824 9-824-2G 2 9-6 276 9-6 277 Disc. Bisphenol-A (Resin) Polyimide Blend (Hardener) Black GC Electronic Grade.2 Caulk Tube Organopolysiloxane Potting Silicone Open Cup 2 Closed Cup GC Potting Epoxy 8 oz kit 5 gram kit 2 gal kit Thermally Conductive Potting Epoxy 8 oz kit Bisphenol-A Type Resin Black Temperature Dielectric Strength -4 to F 4V/mil ^ to 2ºF Application T Curing/ Drying Time 24 Hrs @77 F Hr @ 5 F min @225 F Suggested Solvent 2 ^ 24 hrs @77ºF Skin Over 4 min. Xylol, Toluol, Mineral Spirits 2-4 to F 4V/mil 24 to 72 hrs @77ºF Hr @ 49ºF, min @ 22ºF 2 452V/mil Corrosive Solder Flux Specifications Suggested Solvent 6-2 -6 2 Liquid Solder Flux 6 fl. oz can Rosin & Alcohol to Lt. Straw -2 Solder Flux Monoethanolomine Drethandamine to Lt. Yellow Alcohol Dried Warm Water @ 25-5ºF -27 2 Soldering Paste Petrolatum Amber 6-22 Water Soluble Rosin Milky White Specific Gravity Flux Removers Specifications 25 Flux Remover and Cleaner II 6 fl oz can 6 oz aerosol Trichloroethylene & Isopropanol. 48 -B 2 9-7522-A Static-Free High Strength Flux Remover 8 oz aerosol Trichloroethylene & Isopropanol.4 9-229-A 22-27-A -B Solvents Specifications Used For -42 2 Q Dope Thinner Toluene Polystyrene -2-2 -2 2 Radio-TV Cement 6 fl. oz. gal. Acetone Acetate 4 Lacquer Type Cements -672 226 Paint Thinner Mineral Spirits and Toluene Paint and Varnish 22-29 24 Print Kote Solvent Toluene Silicone Temperature -65 to 25 F 55V/mil 6 6 6 Flammable Liquid Specialty Products Specifications -888-8882 27 High Voltage Putty /4 oz 8 oz Silicone Rubber Compounds -862 8 Belt and Drive Non-Slip bottle Alcohol to Lt. Brown -8-82 -568 26 Silicone Compound fl. oz. gal / oz. Silicone Grease Gel Dielectric Strength -4 to 4 F." Gap, 6V/mil 65V/mil @ mil * e: is determined by the Date Of Manufacture(DOM) located on the product. If a product has a shelf life of 2 months, a closed container is good for one year past the DOM. 66 Phone (85)6-98 Fax (85)6-98
FLUX REMOVERS A powerful Flux Remover that will dissolve and away all known immediately. May cause loss of nomenclature from capacitors or like products. Can discolor some plastics. Will not harm circuit performance. Static-free formulation. 9-7522-A -B GC Flux Solv Static-Free High Strength Flux Remover Static-Free 8 oz. Aerosol Replaces 9-7522 For De-Energized Equipment GC Flux Solv has a hydrocarbon/alcohol base. It is excellent for the removal of Ionic and Non-Ionic from electronic components, PC boards or other surfaces requiring an extra strength remover. Fast evaporation. GC Flux Solv is formulated with no chlorinated solvents and thus has no ozone depleting chemicals. No CFCs or HCFCs. 9-825-G gal pack Flux Remover & Cleaner II Removes all types of organic applicator supplied. Non ODC. 9-229-A 22-27-A -B Pinpoint 6 oz. Can 6 oz. Aerosol GLASS CLEANERS Glass & Plastic Cleaner Wipes dirt, dust and grime from all glass and plastic surfaces without leaving streaks or dulling residue. Contains grease-cutting ammonia. Convenient aerosol packaging. Economical for home or industry. Good for screen TV s and computer monitors. -982 9 oz. Aerosol GC LCD/Plasma Screen & Glass Cleaner with Static Guard Treatment For use on computer screens, screens eyeglasses, windows, windshields, glass, plastics and other surfaces. Safe on non-glare and other coating. Easy to apply and use. Is streak free and very in removing dirt, oily smudges and other deposits with minimum Uses silicone-glycol polymers to provide a high luster and minimize or eliminate dust attracting static. Harmless on most surfaces, and will not scratch, discolor or streak. -756 6 oz. Pump N.S.N. 79--5-758 For the latest information www.gcelectronics.com 47
HEAD CLEANERS Travel Dispenser VCR/Magnetic Head Cleaner Designed for easy one-handed delivery of a wide variety of liquids onto a cloth, cleaning pad, cotton ball or other wipe-on applicators. Can conveniently apply polishes, removers or other liquid products onto the applicator eliminating direct hand contact, spillage, fumes and waste while protecting product quality. The locking top makes this product excellent for use in the technicians tool box. This dispenser is available empty or prefilled with two of your favorite GC icals; Head Cleaner or Isopropyl Alcohol. VCR/Magnetic Head Cleaner removes dust, dirt and oxide from record and playback heads on VCR's, cassette decks and computer drives. Evaporates quickly and leaves no residue. Environmental Data CFC: %, HCFC: %, Cl. Solv.: %, ODP:., VOC % 9-52 Non-Aerosol Replaces -52 9-54 9-77 4 fl. oz. Isopropyl Alcohol 9-774 4 fl. oz. Dispenser only LUBRICANTS White, lithium soap base grease lubricant that provides superior lubrication and reduces friction and wear to a minimum. Suitable for use on wiping contacts. It retains consistency over a wide range of temperatures, will not oxidize or harden and provides outstanding protection against corrosion. 9-22 Anti-Oxidant Grease Tunerlub White Lithium Grease /4 fl. oz. Tube Special lubricant for high frequency contact applications such as television tuners. Purified without traces of metals or metal oxides. Gives lasting protection against oxidation and corrosion. Especially important for use on equipment operated in corrosive atmospheres such as seashores or in industrial areas. A lithium soap base grease with zinc and graphite fillers. Use for wire connectors and aluminum conduit joints. Penetrates aluminum oxide to maintain inter-strand and inter-conductor current paths. Guards against oxidation, improves conductivity and produces a cooler connection. -26 9-826 /4 fl. oz. Tube Luberex Phonolube Superior calcium stearate base grease compound for general use in industry, the shop or at home. Provides excellent lubrication for bearings, appliances, hand tools, bicycles and other sporting equipment including fishing reels and guns; also for business machines, instruments and automotive lubrication. Excellent dielectric properties. Light bodied grease made of polymerized oil, specially developed for the lubrication of small geared mechanisms such as phonographs, record changers, TV channel and record mechanisms, etc. Retains its viscosity over a wide range of temperatures. Highly resistant to oxidation. Will retain its excellent lubricating qualities for years. -26-22 48 Tube oz. Replaces 9-82 N.S.N. 95--54-546 Tube Phone (85)6-98 Fax (85)6-98