SOLDERING, SMT & DESOLDERING PRODUCTS

0.0K C C16 0.1 C14 0.1 P1 1K R6 470 RP1 C5.4K 10KX8 1.0 Q5 2N5098 RP1 C5 10.0K LMC660CN C8.1 C4.01 LMC97UPK C10.01 LMC660CN 100 LMC97UPK U1 0.0K C R4 13 C2 1.0 R3 100 L3 330U L1 330U L5 330U R3 100 C167 C2 1.0 C R3 100 C2 20 R4 13 C3 1.0 U1 0.0K LMC660CN 100 C4.01 C8.1 LMC97UPK C10.01 10.0K.4K C16 0.1 0.0K C12.1 RP1 C5 C16 0.1 R6 470 LMC660CN Q5 2N5098 LMC97UPA SOLDERING, SMT & DESOLDERING PRODUCTS C14 0.1 P1 1K RP1 C5 R4 13 C4 1.0 R4 13 C5 1.0 R4 13 0.0K C10.01 C97JE 100 L3 330U C6100P L1 330U 0.0K RP1 C5 C6100P L1 330U L3 330U C5600P 100 C10.01 LMC97 L9 230U C8500P 0.0K L2 570U

Manufacturers of The World s Most Practical Solder Handling Tools

The Hummingbird Motion that stirs emotion. Darting swiftly then hovering. Humming. A shimmering swish of color where poetry and practical sense become one. - S. Fortune Inspiring. Characteristically adaptable. Instinctive. Efficient. Highly maneuverable. With the stamina of birds many times their size. An elegant creature of brilliant design and engaging, irrepressible personality. This tiny yet complex airborne marvel symbolizes EDSYN s touchstone to Precise Performance. The kind of performance built into every tool we make, backed by service and engineering dedicated to suit your needs. By design. Look for the hummingbird symbol on new products and precise performance features throughout this catalog.

Performance Products TOOLS TIPS ACCESSORIES TXS70 SMT Reflow Vacuum Workstation Page 44 971 Soldering Station Featuring General Purpose, Fume Extraction & Hot Air Tips Page 14 FXF11 ATMOSCOPE FUMINATOR Fume Extractor Fan Page 64 Copyright 1997 by EDSYN, INC. All Rights Reserved No part of this catalog, including the individual icons, may be reproduced or utilized in any form or by any means without the written permission of EDSYN, INC. The names LONER, ATMOSCOPE, SOLDAPULLT, SOLDAVAC, AUTO-VAC, IDLE-REST, OCTAVAC, KLATCH, FUMINATOR, SILVERSTAT, WIGAPRY and (EDSYN Quality symbol) are proprietary trademarks of EDSYN, INC. Most products are covered by U.S. and foreign patents and pending applications. Design, color, weight and material subject to change without notice. Tip style on tools may vary. Printed in U.S.A.

Table of Contents Index by Section...4 Soldering...6 MCS100 Master Control System... 8 971 Modular Series... 14 Featuring Soldering, Fume Extraction & Hot Air capabilities Soldering CRIB NOTES... 18 New! See pages 14-16 Surface Mount Technology (SMT)...20 971HA SMT Hot Air Station... 24 SMT CRIB NOTES... 28 New! See page 24 Desoldering...30 ZD500DX Deluxe Hot Tip Station... 32 Vacuum Generators... 35 Desoldering CRIB NOTES... 39 New! See page 32 Multi-Tasking...42 TSX70 SMT Reflow Vacuum... 44 Possibly the best site preparation tool in the industry Multi-Tasking CRIB NOTES... 50 New! See page 44 International...52 Soldering... 54 Desoldering... 56 SMT and Multi-Tasking... 58 Fume Extractor Fans... 60 Accessories...62 Fume Extractor Fans... 64 Flex Grip Holding Vise... 65 Temperature Measurement Systems. 66 Temperature Probes... 67 Pick-Up System... 69 New! See pages 64-65 New! See page 69 EDSYN Customer Service...72 Glossary...73 Index by Part Number...74 EDSYN Research & Development...76 EDSYN Offices Worldwide...77

4 Soldering MCS100... 8,9 MCS100-S... 8,9 951SX... 10 952SX... 10 951DX... 11 952DX... 11 951HP... 12 952HP... 12 952HX... 13 971... 14 971FX... 15 972... 16 CL1080... 17 CL1180... 17 CL1481... 17 CL1484... 17 IP481... 17 IR089... 17 PS536... 17 15002W95.... 18 HC273... 18 LN230... 18 LT375... 18 LT431... 18 LTC71... 18 OPT823... 18 OPT825... 18 PD528... 18 RC349... 18 RCS71... 18 RS199... 18 RS243... 18 RS271... 18 RS372... 18 SC581... 18 SH230... 18 SH230-1... 18 SR019... 18 SR026... 18 SR028... 18 SR029... 18 SR030... 18 SR032... 18 SR033... 18 SR042... 18 SR043... 18 SR054... 18 SR057... 18 SR058... 18 SR060... 18 SR062... 18 SR063... 18 SR064... 18 SR065... 18 SR070... 18 SR075... 18 SR081... 18 SR226... 18 SR240... 18 SR241... 18 SR243... 18 SR249... 18 SR251... 18 SR280... 18 SR281... 18 SR298... 18 SR302... 18 SR337... 18 SR462... 18 SR574... 18 SR579... 18 CH12... 19 CH17...19 CH43...19 CT1010...19 CT12...19 CT1818...19 CT25...19 CT2626...19 CT31...19 CT504...19 CT510...19 CT919...19 HP371...19 HP374...19 HP375...19 HP376...19 HP399...19 HP429-1...19 HP439-1...19 HP441...19 HP444...19 HS106BC...19 LT337BC...19 LT340BC...19 LT374... 19 LT375... 19 LT376... 19 LT382... 19 LT392... 19 LT399... 19 LT431... 19 LT439... 19 LT441BC...19 LT444... 19 LT445... 19 LT446... 19 LT570BC...19 LT602-1...19 LT603... 19 Soldering CRIB NOTES... 18,19 SMT 1036DX...22 1036... 23 971HA...24 1032... 25 MCS100HA...26,27 15002W95... 28 15242W53H9... 28 AF040...28 AF110... 28 AF511... 28 AF629...28 CC355...28 FA069... 28 HS307...28 HS308...28 HT495...28 LP250... 28 LT428... 28 LTC71... 28 LU26...28 OS139...28 PAS53...28 PD525...28 PD532...28 PD533...28 PR570...28 PS537...28 PS542...28 RC349...28 RCS75...28 RS199...28 RS321...28 DESOLDERING SPS12...28 SPS25...28 SR001...28 SR028...28 SR030...28 SR033...28 SR062...28 SR081...28 SR102...28 SR138...28 SR240...28 SR257...28 SR362...28 SR394...28 SR487...28 SR521...28 SR535...28 SR574...28 SR579...28 SR620...28 CT1010...29 CT12...29 CT1818...29 CT25...29 CT2626...29 CT31...29 CT504...29 CT510...29 CT919...29 HPA02...29 LT426... 29 LT427... 29 LT432... 29 LT436... 29 LT456... 29 LT458... 29 LT459... 29 LT460... 29 LT468... 29 LT488... 29 LT493... 29 LT526... 29 LT536... 29 LT571... 29 LT572... 29 LU25...29 LU26...29 LU27...29 LU30...29 LU571...29 LU572...29 LUA35H...29 LUA73...29 SPS12...29 SPS25...29 SMT CRIB NOTES.28,29 Desoldering PS501...32 ZD500DX...32 HT500...33 PM100...33 PS900-1...33 ZD505V...33 DS117...34 DS217...34 DS317...34 DS417...34 DS517...34 PH100...34 PH177...34 PH178...34 PH182...34 PH184...34 Index by Section PH201...34 PH202...34 PH245...34 PH246...34 PH247...34 PH358...34 ZD100...34 ZD100-1...34 VP171...35 VS171A...35 VS174...35 DS017...36 LRT14...36 MRT16... 36 OB207...36 ODS31... 36 OS130...36 OSB32... 36 PT109...36 PT209...36 PT309...36 SRT12...36 SRT751...36 SS750...36 US140...36 US240...36 AS196...37 DS017LS...37 LS197... 37 LS363... 37 LS751... 37 OB207...37 ODS31... 37 OS130...37 SS350...37 SS750LS...37 US340...37 DS017LQ...38 DS017QC...38 LS135... 38 LS753... 38 ODS31... 38 OSB32... 38 PT109MT...38 PT409MT...38 SRT035...38 SRT754...38 AC737...39 AF040...39 AF625...39 AF629...39 CS468...39 CS468-1...39 CS468-2...39 FC640...39 HT01...39 HT500...33,39 HT500-2... 32,39 HT500H...39 MS229...39 OL111... 39 PM100...39 PS501...39 PS900-1...39 RS199...39 RS383...39 SR082...39 SR120...39 SR136...39 SR335...39 SR636...39 WT619... 39 ZD107...39

ZD112... 39 ZD12...39 ZD13...39 ZD14...39 ZD25...39 ZD27...39 ZD58...39 ZD60...39 AF137... 40 AF139... 40 AF385... 40 AV060... 40 CB138... 40 CB138M... 40 CS332... 40 DT113... 40 DT114... 40 FC640... 40 HS320... 40 LQ125... 40 LS135... 40 LS197... 40 LS215... 40 LS561... 40 OL111... 40 SR194... 40 SR195... 40 SR196... 40 SR212... 40 SR213... 40 SR214... 40 SR215... 40 SR216... 40 SR292... 41 HS320... 41 OV367... 41 SR040... 41 SR284... 41 SR286... 41 SR287... 41 SR288... 41 SR289... 41 SR290... 41 SR291... 41 SR293... 41 SR296... 41 SR297... 41 SR391... 41 SR392... 41 SR537... 41 SR596... 41 SR660... 41 SR661... 41 VF134... 41 VF188... 41 VM033... 41 VM034... 41 VP189... 41 VP267... 41 VP268... 41 VT190... 41 VTG59... 41 VTG63... 41 Desoldering CRIB NOTES.. 39,40,41 Multi-Tasking TSX70... 44,45 ZD906... 46 ZD905V...47 ZD905V-HP... 47 ZD500HA... 48 ZD500HA-3... 48 1052... 49 1052HP...49 15002W95... 50 15242W45... 50 15242W53... 50 15242W53H9... 50 15242W70... 50 15242W70H10... 50 AF040... 50 AF629... 50 AFX73... 50 FA069... 50 FC639... 50 HP375... 50 HPS72... 50 HS304... 50 HS308... 50 HT500... 50 HT500-2... 50 LST11... 50 LT375... 50 LU26...50 MS229... 50 OS730... 50 OS731... 50 PD528... 50 PD533... 50 PM100... 50 PM200... 50 RS199... 50 RS372... 50 RSX72... 50 SC525... 50 SC581... 50 SH232... 50 SR057... 50 SR060... 50 SR062... 50 SR063... 50 SR064... 50 SR106... 50 SR120... 50 SR130... 50 SR131... 50 SR266... 50 SR280... 50 SR283... 50 SR298... 50 SR304... 50 SR335... 50 SR341... 50 SR356... 50 SR387... 50 SR394... 50 SR403... 50 SR404... 50 SR405... 50 SR408... 50 SR414... 50 SR521... 50 SR525... 50 SR556... 50 SR560... 50 SR563... 50 TSX70-1... 50 TSX70-2... 50 TSX713...50 CH12...51 CH17...51 CH43...51 CT1010...51 CT12...51 CT1818...51 CT25...51 CT2626...51 CT31...51 CT504... 51 CT510... 51 CT919... 51 HP371... 51 HP374... 51 HP375... 51 HP376... 51 HP399... 51 HP429-1... 51 HP439-1... 51 HP441... 51 HP444... 51 LT374... 51 LT375... 51 LT376... 51 LT382... 51 LT392... 51 LT399... 51 LT431... 51 LT439... 51 LT444... 51 LT445... 51 LT446... 51 LT603... 51 LUA35H... 51 TSX713...51 TSX715...51 TSX716...51 TSX717...51 TSX718...51 Multi-Tasking CRIB NOTES... 50,51 International 951DP-100... 54,55 951DP-230... 54,55 951DP-230B... 54,55 951DP-230P... 54,55 951DX-100... 54,55 951DX-230... 54,55 951DX-230B... 54,55 951DX-230P... 54,55 971DX-100... 54,55 971DX-230... 54,55 971DX-230B... 54,55 971DX230P...54,55 ZD500DX-100... 56,57 ZD500DX-230... 56,57 ZD500DX-230B... 56,57 ZD500DX-230P... 56,57 ZD505V-100... 56,57 ZD505V-230... 56,57 ZD505V-230B.... 56,57 ZD505V-230P.... 56,57 ZD905V-100... 56,57 ZD905V-230... 56,57 ZD905V-230B.... 56,57 ZD905V-230P.... 56,57 1032-100...58,59 1032-230...58,59 1032-230B... 58,59 1032-230P... 58,59 1036-100...58,59 1036-230...58,59 1036-230B... 58,59 1036-230P... 58,59 TSX70-100... 58,59 TSX70-230... 58,59 TSX70-230B... 58,59 TSX70-230P... 58,59 FXF11-100... 60,61 FXF11-230... 60,61 FXF12-100... 60,61 FXF12-230... 60,61 Accessories FXF10... 64 FXF11... 64 FXF12... 64 FG2000... 65 MS410... 66 MS412... 66 FX633... 67 FX635... 67 TP791... 67 TP792... 67 TP794... 67 TP795... 67 WL675... 67 XF01...67 XF02...67 XF03...67 AFX74... 68 CS468... 68 CS468-1... 68 CS468-2... 68 OPT812... 68 PA233... 68 PA233-1... 68 PD525... 68 PD528... 68 PD529... 68 PD532... 68 PD533... 68 SC581... 68 SD300... 68 SD302... 68 TH100... 68 TH101... 68 WP286... 68 WP556... 68 VA175... 69 BWS22... 70 LP200... 70 LP200S... 70 LP250... 70 LP251... 70 ST706... 70 ST707... 70 ST707-1... 70 ST800... 70 AF039... 71 DS299... 71 LK773... 71 LK773H... 71 LN250... 71 LN251... 71 LN260... 71 LN261... 71 LN270... 71 LN270S... 71 LN271... 71 RS190... 71 RS199... 71 SH230... 71 SP125... 71 SP250... 71 SP375... 71 SPS12... 71 SPS25... 71 STC84... 71 Customer Service... 72 Glossary... 73 Index by P/N... 74,75 Hummerworks... 76 DESOLDERING Index by Section 5

Integrated design and a unique calibration feature allow the EDSYN MCS100 master control soldering and analytical system to save you time and money when you use, test, evaluate or calibrate soldering processes. Computerized soldering and electronic memory enhance efficiency. Save space on your bench by minimizing the need for more test equipment. While the EDSYN MCS100 may deliver more performance than you are currently using, this Master Control System allows you to set the performance standard your competition will have to catch up to. Being a leader means maximizing productivity with leading edge, forward thinking technology - time and time again. It is a pattern we have grown accustomed to since EDSYN patented the Original Deluxe SOLDAPULLT and launched an industry revolution nearly 40 years ago. EDSYN Quality 6

MCS100 LONER Master Control System, A computer Controlled High Performance Soldering System, Page 8 Soldering DESOLDERING 7 PHONE: 818.989.2324 FAX (Sales): 818.997.0895 FAX (Service): 818.997.0460 Email:Info@edsyn.com INTERNET: www.edsyn.com

MCS100/MCS100-S LONER Master Control System, A Computer Controlled High Performance Soldering System The proprietary software design of our MCS100/MCS100-S enhances the use, testing, evaluation or calibration of soldering processes. Easy to read 4 lines x 16 character LCD Auto-calibration feature allows precise calibration of temperature Helps with ISO9000 requirements Displays in Fahrenheit or Celsius Stores up to 4 different tips and temperature data 24V hand tool with a unique collar system that easily converts to fume exhaust soldering or a SMT hot air rework system Lock-out feature prevents any unauthorized data entry Direct tip-heater configuration results in quick heatup and recovery Specifications for Model MCS100 Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 30W - 100W 24V, 45W 200 F-900 F/93 C-482 C ±6 F/±3 C Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 4.1 W x 8.2 H x 10 D 104 mm x 208 mm x 254 mm Weight Power Supply Hand Tool 4.8 lbs/2.2 kg 3 oz/85 g Contents MCS100 PD528 Soldering Station (Includes HP375 High Performance Soldering Tip) Tool Pod Accessory Kit Includes: SDS100 Temperature Sensor Docking System (included with MCS100-S) FX635 Tool Fixture (for MCS100-S) WL675 Thermocouple Wire Loops (for MSC100-S) HP375 High Performance Soldering Tip WP556 WIGAPRY Low Static Computer Aid 8 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 18-19. LONER Master Control System

MCS100/MCS100-S LONER Master Control System Computer Controlled High Performance Soldering System Use the surface area probe (TP791) to monitor temperature of adjacent components while soldering. The MCS100 can be used to preheat a component to a desired temperature. For heat sensitive SMD s, an audible alarm warns the operator when critical temperature is reached. The MCS100 is the only soldering tool in the world that has its own internal calibration program. Perfect for ISO9000 compliance. The MCS100 can be used to check performance and calibration of other soldering tools. For more information on replacement parts, specifications & features, see CRIB NOTES on pages 18-19. DESOLDERING LONER Master Control System 9

951SX/952SX LONER Single and Dual Temperature Controlled Soldering Stations 951SX High reliability and cost efficiency make the 951SX and 952SX EDSYN s most popular soldering stations for the assembly line. Accurate linear temperature control Easy to maintain and calibrate Modular assembly of parts for easy service Wide variety of soldering and SMT CROWN tips available External calibration helps with ISO9000 compliance 952SX dual station offers both standard soldering and heavy duty soldering in one unit Specifications for Model 951SX/952SX Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 15W - 220W 120V, 95W 400 F-800 F/205 C-427 C ±6 F/±3 C Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 4.1 W x 8.2 H x 10 D 104 mm x 208 mm x 254 mm Weight 951SX 2.5 lbs/1.1 kg 952SX 3.1 lbs/1.4 kg Contents 951SX/952SX PD528 SH230 WP556 Soldering Station (951SX includes LT375 952SX includes LT375 and LT338BC tip) Tool Pod ( 952SX includes two Pods) Sponge Holder (Includes RS199 Cleaning Sponge, RS243 Leveling Pad, LN230 Liner) WIGAPRY Low Static Computer Aid Use LT570BC and RS271 Retaining Sleeve to rework various SMD packages 10 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 18-19. LONER Soldering Stations

951DX/952DX LONER Deluxe Single and Dual Soldering Stations Designed for users who require low voltage tools on the production line. 951DX 24V hand tool meets low voltage requirements Accurate temperature control External calibration for ISO9000 compliance Modular assembly of parts for easy maintenance Wide variety of soldering and SMT CROWN tips available Detachable handles for easy replacement Specifications for Model 951DX/952DX Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 18W - 160W 24V, 53W 400 F-800 F/205 C-427 C ±6 F/±3 C 952DX Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 4.1 W x 8.5 H x 10 D 104 mm x 216 mm x 254 mm Weight 951DX 4 lbs/1.8 kg 952DX 6 lbs/2.7 kg Contents 951DX-2 952DX-2 SR482 PD528 SH230 WP556 Power Supply for 951DX Power Supply for 952DX Soldering Hand Tool (951DX includes LT375 Tip with RS372 Retaining Sleeve. 952DX includes LT375 Tip with RS372 Retaining Sleeve and LT338BC Tip with RS271 Retaining Sleeve. Tool Pod (952DX includes two Pods) Sponge Holder (Includes RS199 Cleaning Sponge, RS243 Leveling Pad, LN230 Liner) WIGAPRY Low Static Computer Aid For more information on replacement parts, specifications & features, see CRIB NOTES on pages 18-19. DESOLDERING LONER Deluxe Soldering Stations 11

951HP/952HP LONER High Performance Soldering Stations 951HP EDSYN s single and dual high performance soldering stations are designed for high volume assembly lines and multi-layer rework. Direct tip-heater configuration provides fast heat-up and recovery Accurate temperature control External calibration helps with ISO9000 compliance Modular assembly of parts for easy maintenance Wide variety of soldering and SMT CROWN tips available Use 952HP for a combination of SMT or throughhole tasks Specifications for Model 951HP/952HP Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 17W - 170W 120V, 45W 400 F-800 F/205 C-427 C ±6 F/±3 C 952HP Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 4.1 W x 8.2 H x 10 D 104 mm x 208 mm x 254 mm Weight 951HP 2.5 lbs/1.1 kg 952HP 3.1 lbs/1.4 kg Contents 951HP/952HP PD528 SH230 WP556 High Performance Soldering Stations (951HP includes HP375 Tip with HPS72 Retaining Sleeve. 952HP includes HP375 Tip and HP441 Tip each with HPS72 Retaining Sleeve. Tool Pod (952HP includes two Pods) Sponge Holder (Includes RS199 Cleaning Sponge, RS243 Leveling Pad, LN230 Liner) WIGAPRY Low Static Computer Aid 12 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 18-19. LONER High Performance Soldering Stations

952HX LONER High Performance and Standard Soldering Station 952HX Modular design combines high performance and standard soldering features in a single station for maximum flexibility. One high performance soldering tool for ground planes, heat sinks or SMT rework One standard soldering tool for ordinary tasks Modular assembly of parts for easy maintenance Wide variety of soldering and SMT CROWN tips available External calibration helps with ISO9000 compliance Specifications for Model 952HX Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 15W - 220W 120V, 95W 400 F-800 F/205 C-427 C ±6 F/±3 C Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 4.1 W x 8.2 H x 10 D 104 mm x 208 mm x 254 mm Weight 3.1 lbs/1.4 kg Contents 952HX PD528 SH230 WP556 Dual High Performance Soldering Station (Standard Soldering Tool includes LT375 Tip and RS372 Retaining Sleeve. High Performance Soldering Tool includes HP441 Tip with HPS72 Retaining Sleeve.) Tool Pod (Includes two Pods) Sponge Holder (Includes RS199 Cleaning Sponge, RS243 Leveling Pad and LN230 Liner) WIGAPRY Low Static Computer Aid Touch up or rework QFP s and PLCC s with a small SMT soldering tip Rework QFP s and PLCC s using a CROWN tip on the high performance tool For more information on replacement parts, specifications & features, see CRIB NOTES on pages 18-19. DESOLDERING LONER High Performance and Standard Soldering Station 13

971 LONER High Performance Temperature Controlled Soldering Station Our new series of stations offer unsurpassed versatility. Unique modular design allows for easy and economical conversion to fume extraction or hot air. Direct tip-heater configuration results in quick heatup and recovery Advanced circuit design provides precise temperature control and external calibration Fume extraction and hot air conversion kits (sold separately) offer economy and unbeatable flexibility Accepts a wide variety of general purpose tips New front loading design makes tip change faster and easier Specifications for Model 971 Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 15W - 220W 120V, 95W 400 F-800 F/205 C-427 C ±6 F/±3 C Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 4.1 W x 8.2 H x 10 D 104 mm x 208 mm x 254 mm Weight Power Supply 2.5 lbs/1.1 kg Soldering Tool 3 oz/85 g Contents 971 Soldering Station (Includes LT375 Soldering Tip) PD528 Tool Pod SH230 Sponge Holder (Includes RS199 Cleaning Sponge, RS243 Pad, LN230 Liner) Option Kits OPT823 OPT825 (Sold Separately) Fume Extraction Conversion Kit SMT Hot Air Conversion Kit The secret is in the handle. Loosen the collar and watch your station grow. The unique design of the 971 hand tool makes conversion from soldering to fume extraction or to hot air fast, simple and economical. 14 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 18-19. LONER High Performance Temperature Controlled Soldering Station

971FX LONER Soldering Station with Fume Extraction System A cost-effective solution for single user tip fume extraction. Requires clean and dry shop air, 60-90 psi Three-stage filtration system effectively removes fumes at the source Retrofits to standard soldering or hot air station with optional conversion kits Accepts a wide variety of general purpose tips Specifications for Model 971FX Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 15W - 220W 120V, 95W 400 F-800 F/205 C-427 C ±6 F/±3 C Tip-to-Ground Voltage Leakage/Resistance < 2 mv/< 2 ohms Overall Dimension 4.1 W x 8.2 H x 10 D 104 mm x 208 mm x 254 mm Weight Power Supply 2.5 lbs/1.1 kg Soldering Tool 3 oz/85 g Contents 971FX PD533 SH230 VS174 PAS53 HS307 CA165 Soldering Station with Fume Extraction System (Includes LT375 Soldering Tip) Tool Pod Sponge Holder (Includes RS199 Cleaning Sponge, RS243 Pad, LN230 Liner) Vacuum System Pod Air Switch Low Static Silicone Hose, 1/8 i.d. Set of Clips for Power Cord/Hose Attachment (set of 10) Fumes are drawn away at the source into a contained vacuum chamber. The 971FX collar assembly features an adjustable collection tube that works with most tip lengths and shapes. For more information on replacement parts, specifications & features, see CRIB NOTES on pages 18-19. DESOLDERING LONER Soldering Station with Fume Extraction System 15

972 LONER High Performance Dual Temperature Controlled Soldering Station A high performance dual station that allows the user to design a preferred combination of soldering, hot air or fume extraction for ultimate versatility. Direct tip-heater configuration results in quick heatup and recovery Advanced circuit design provides precise temperature control and external calibration Fume extraction and hot air conversion kits (sold separately) offer economy and unbeatable flexibility Dual temperature controls calibrate to soldering and hot air requirements Specifications for Model 972 Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 15W - 220W 120V, 95W 400 F-800 F/205 C-427 C ±6 F/±3 C Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 4.1 W x 8.2 H x 10 D 104 mm x 208 mm x 254 mm Weight Power Supply 3.1 lbs/1.4 kg Soldering Tool 3 oz/85 g Contents 972 Soldering Station (Includes LT375 Soldering Tip and LT399 Soldering Tip) PD528 SH230 Tool Pod (Includes two Pods) Sponge Holder (Includes RS199 Cleaning Sponge, RS243 Pad, LN230 Liner) Option Kits OPT823 OPT825 (Sold Separately) Fume Extraction Conversion Kit SMT Hot Air Conversion Kit Pre-heat boards and perform standard soldering techniques from the same station 16 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 18-19. LONER High Performance Dual Temperature Controlled Soldering Station

Length - 10.2 /259 mm Length - 9.5 /241.3 mm Weight - 6 oz/170 g Weight - 6 oz/170 g CL1080 LONER Temperature Controlled Soldering Tool 120V, 70W Allows user to adjust temperature control ESD-safe Special models with higher maximum temperature available CL1180 LONER Temperature Controlled Soldering Tool 120V, 50W Tamper-resistant temperature control ESD-safe Special models with higher maximum temperature available Length - 8 /203.2 mm Weight - 3 oz/85 g CL1481 LONER Constant Temperature Soldering Tool 120V, 30W Accepts a wide variety of tips ESD-safe CL1484 LONER Constant Temperature Soldering Tool 120V, 20W Great for tool kits Length - 8 /203.2 mm Weight - 3 oz/85 g ESD-safe PS536 Power Supply IP481 IDLE-REST Tool Base IR089 IDLE-REST Portable Tool Base Features power switch and sponge holder (pod sold separately) Features sponge holder and solder spool holder Collapsible. Perfect for tool kit. Comes with two solder spools. (Use only with CL1080 or CL1180) For more information on replacement parts, specifications & features, see CRIB NOTES on pages 18-19. DESOLDERINGLONER Soldering Tools 17

Crib Notes for Soldering Stations 1. Specifications Mil-Specs Low Static ESD-Safe Control Circuit 2. Easy Maintenance Soldering Tip DOD-STD-2000-1B, WS-6536E, MIL-STD-2000 DOD-STD-1686, DOD-HDBK-263 Closed Loop Zero Crossing Always use genuine EDSYN soldering tips. To prevent tip from seizing, remove tip from heater and wipe or brush off any oxidation build up. Keep tips tinned to make them last longer and perform better. 5. Spare Parts for Hand Tools: 951SX and 952SX Part Number LT375 RS271 RS372 SR057 SR058 SR060 SR062 SR063 SR064 SR280 SR298 Part Number Description LONER standard spade tip Retaining sleeve for heavy duty tips Retaining sleeve Handle Cord strain relief Heater element assembly kit O-ring Vinyl sleeve Collar Tool cord assembly Soldering tool, complete assembly 6. Spare Parts for Power Supply: 951SX, 952SX and 971 Description Cleaning Sponge 3. Spare Parts for CL1080, CL1180 Part Number LT375 RC349 RS271 RS372 SR028 SR029 SR030 SR032 SR033 SR070 SR075 SR081 SR462 Keep temperature as low as possible. Replace RS199 cleaning sponge to minimize tip contamination. Description LONER standard spade tip Retaining collar Retaining sleeve for heavy duty tips Retaining sleeve Power cord, 3-prong, 120 VAC Boot for power cord Clear handle for CL1080 Cord strain rellief Circuit board for CL1080 120V, 95W hollow heater assembly Circuit board for CL1180 Vinyl grip sleeve for retaining collar Handle for CL1180 15002W95 Circuit board, 120V LN230 Liner for SH230 PD528 Tool pod RS199 Cleaning sponge RS243 Leveling pad for SH230 SC581 Solder collector for tool pod SH230 Cleaning sponge holder assembly SH230-1 Sponge tray holder SR019 Dovetail mount SR026 Power cord only SR042 Thermal housing for tool pod SR043 Front housing for tool pod SR054 Bottom weight SR065 Power switch, illuminated SR226 Strain relief for tool cord SR241 Strain relief for power cord SR243 5K potentiometer assembly SR249 Fuse, 250V, 1.6 A (5 mm x 20 mm) SR251 Rubber feet (set of 4) SR302 Control panel label for 951SX 7. Spare Parts for CL1481,CL1484 Part Number Description 18 4. Spare Parts for 971 Part Number LTC71 LT375 OPT823 OPT825 RCS71 SR240 SR574 SR579 Description Tip collet LONER standard spade tip Fume extraction conversion kit Hot air conversion kit Retaining collar and sleeve O-ring for handle,.50 i.d. Heater assembly Handle HC273 LT431 RS372 SR057 SR064 SR281 SR337 Made in USA For more information on replacement parts, specifications & features, see CRIB NOTES on pages 18-19. DESOLDERINGSoldering CRIB NOTES Threaded retaining collar for CL1481 LONER mid-length spade tip Retaining sleeve for CL1484 Handle Collar for handle Hollow heater assembly for CL1481 Threaded hollow heater assembly for CL1484 8. Additional Features Easy maintenance and replacement Modular design for easy service UL listed 18 month warranty (90 day warranty for CL1481 and CL1484)

Crib Notes for Soldering Stations 11. High Performance SolderingTips FOR 951HP, 952HP, 952HX ONLY Part Number width head length HP371.03 (0.8 mm).57 (14.5 mm) Fine spade EDSYN soldering stations accept a wide variety of standard LONER tips. See FORM.800 for more tip information. 9. General Purpose Soldering Tips Part Number width head length LT392.01 (0.3 mm) 1.13 (28.8 mm) Extra-long needle point LT602-1.02 (0.5 mm).44 (11.2 mm) Short needle point LT382.02 (0.5 mm).62 (15.7 mm) Long cone LT603.02 (0.5 mm).69 (17.5 mm) Mid-length needle point LT374.03 (0.8 mm).48 (12.2 mm) Standard probe LT446.03 (0.8 mm).48 (12.2 mm) SMD probe LT439.03 (0.8 mm).50 (12.7 mm) Thin SMD probe LT444.04 (1.0 mm).78 (19.8 mm) SMD mid-length fine spade LT375.06 (1.5 mm).48 (12.2 mm) Standard spade LT431.07 (1.8 mm).74 (18.9 mm) Mid-length spade LT376.12 (3.0 mm).48 (12.2 mm) Short stubby spade LT445.03 (0.8 mm).48 (12.2 mm) SMD angle face LT399.16 (4.0 mm).59 (15.0 mm) Large angle face HP444.04 (1.0 mm).83 (21.1 mm) Mid-length fine spade HP375.06 (1.5 mm).57 (14.5 mm) Standard spade HP376.12 (3.0 mm).57 (14.5 mm) Wide spade HP441.20 (5.1 mm).55 (14.0 mm) Long wide spade HP429-1.02 (0.5 mm).76 (19.3 mm) Angled mid-length probe HP439-1.03 (0.8 mm).51 (13.0 mm) SMD angle thin probe HP374.05 (1.2 mm).57 (14.5 mm) SMD probe HP399.21 (5.3 mm).39 (9.9 mm) Large angle face 12. CROWN Tips FOR 951HP, 952HP, 952HX: USE WITH LUA35H ACCUMULATOR, HPS72 RETAINING SLEEVE AND HPA02 ADAPTER. FOR OTHER EDSYN SOLDERING TOOLS: USE WITH AC735 ACCUMULATOR, CTS71 RETAINING SLEEVE AND CTA02 ADAPTER. CROWN Fork CROWN Tunnel Part No. width x gap SMD Pack CT12.07 x.10 (1.8mm x 2.5mm) SOT-23 CT25.10 x.21 (2.5mm x 5.3mm) SOT-89 CT31.14 x.07 (3.6mm x 1.8mm) 1206, 1210 CT504.20 x.18 (5.1mm x 4.5mm) SOIC-8 CT510.20 x.41 (5.1mm x 10.4mm) SOIC-14,16 10. Heavy Duty Soldering Tips USE WITH RS271 RETAINING SLEEVE LT337BC.10 (2.5 mm).74 (18.9 mm) Terminal spade LT340BC.12 (3.0 mm).77 (19.5 mm) Medium angle face LT570BC.17 (4.3 mm).68 (17.3 mm) SMD knife HS106BC.18 (4.5 mm).45 (11.4 mm) Wide spade LT441BC.21 (5.3 mm).94 (23.9 mm) Long wide spade CROWN Quad CROWN Hammer Head CT919.34 x.74 (8.6mm x 18.9mm) SOJ-28 side x side CT1010.40 x.40 (10.2mm x 10.2mm) PLCC-20 CT1818.70 x.70 (17.8mm x 17.8mm) PLCC-44 CT2626 1.0 x 1.0 (25.4mm x 25.4mm) PLCC-68 width CH12.47 (11.9mm) n/a CH17.65 (16.5mm) n/a CH43 1.69 (43mm) n/a For more information on replacement parts, specifications & features, see CRIB NOTES on pages 18-19. DESOLDERINGSoldering CRIB NOTES 19

DX marks the spot. EDSYN s 1036DX self-contained hot air station navigates tight neighborhoods and densely populated areas with pinpoint accuracy the first time and every time. Address smaller SMD s in hard-to-reach locations with hot air or contact soldering techniques. Designed for high performance in a small footprint. Being a leader means hitting the mark - time and time again. It is a pattern we have grown accustomed to since EDSYN patented the Original Deluxe SOLDAPULLT and launched an industry revolution nearly 40 years ago. EDSYN Quality 20 DESOLDERING

1036DX LONER ATMOSCOPE Self-Contained SMT Deluxe Hot Air Station, Page 22 SMT DESOLDERING 21

1036DX LONER ATMOSCOPE Self-Contained SMT Deluxe Hot Air Station A versatile and complete SMT hot air station that adjusts to either hot air or contact soldering techniques from the same station. Utilizes unique hot air tips for easier rework on Gullwings, J-Leads, PLCC s and small outline components Uses LONER general purpose soldering tips for through-hole rework Small hand tool is light and easy to maneuver Air control valve allows precise airflow LP250 vacuum pick-up tool included Electronic circuitry provides fast heat up and improved temperature stability Specifications for Model 1036DX Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 85W - 230W 24V, 53W 400 F-800 F/205 C-427 C ±6 F/±3 C Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 4.1 W x 8.5 H x 9 D 104 mm x 216 mm x 229 mm Weight Power Supply 4.6 lbs/2.1 kg Hand Tool SR362 3 oz/85 g Pick-up Tool LP250 1 oz/28 g Contents 1036DX PD533 LP250 PD532 SH230 Self Contained SMT Deluxe Hot Air Station (Includes LU26 Hot Air Tip and LT375 Soldering Tip) Tool Pod for Hot Air Tool Pick-Up Tool for SMD Components Tool Holder for Pick-Up Tool Sponge Holder with LN230 Liner, RS199 Cleaning Sponge and RS243 Pad Accessory Kit Includes: HC273 Threaded Retaining Collar for Soldering Tip WT620 Tip Wrench, 1/4 Socket WT623 Tip Wrench, Dual Open End, 1/4 & 3/4 WT624 Tip Wrench, Dual Open End, 1/4 & 5/16 ST800 SMD Helper (Includes RB642 Shim Blade, WS630 Pull Wire) WP556 WIGAPRY Low Static Computer Aid 22 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 28-29. LONER DESOLDERING ATMOSCOPE Self-Contained SMT Deluxe Hot Air Station

1036 LONER ATMOSCOPE Self-Contained SMT Hot Air Station Designed for rework on larger components. The self-contained 1036 provides power and precision for components with up to 84 pins (208 QFP). Self-contained with built-in air source Zero crossing circuitry Uses a wide variety of nozzle sizes Expands to include optional soldering iron 95 watt heater provides power for larger components Most cost effective self-contained hot air station that EDSYN manufactures Specifications for Model 1036 Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 150W 120V, 95W 400 F-800 F/205 C-427 C ±6 F/±3 C Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 5.2 W x 8.5 H x 10 D 132 mm x 216 mm x 254 mm Weight Power Supply PS542 4.3 lbs/1.9 kg Hand Tool FA069 6 oz/170 g Contents PS542 FA069 PD525 SH230 Power Supply Hot Air Hand Tool (Includes LT428 Hot Air Tip) Tool Pod Sponge Holder with LN230 Liner, RS199 Cleaning Sponge and RS243 Pad Accessory Kit Includes: WT620 Tip Wrench, 1/4 Socket WT624 Tip Wrench, Dual Open End, 1/4 & 5/16 ST706 SMD Tool to Lift Off SMD s.002 /.05 mm x.238 /6.05 mm RB641 Shim Blade Replacement.002 /.05 mm x.238 /6.05 mm x 3 /.61 m WS630 SMD Pull Wire with Low Static Spool.01 dia./.25 mm x 10 /3.08 m AN122 Anti-Seize Compound For more information on replacement parts, specifications & features, see CRIB NOTES on pages 28-29. DESOLDERING LONER ATMOSCOPE Self-Contained SMT Hot Air Station 23

971HA LONER ATMOSCOPE SMT Hot Air Station New modular design offers unique versatility and outstanding performance using hot air or traditional contact rework techniques. Runs on shop air or nitrogen, 20-80 psi External calibration for IS09000 compliance Graduated flow regulator monitors air flow in SCFH Optional FS205 foot switch available Built-in air switch activates air when tool is lifted from holder Uses same tips and nozzles as 1032 and 1036 hot air stations Easily converts to contact soldering fume extraction with OPT823 Fume Extraction Kit Specifications for Model 971HA Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 15W - 220W 120V, 95W 400 F-800 F/205 C-427 C ±6 F/±3 C Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 4.1 W x 9.7 H x 10 D 104 mm x 246 mm x 254 mm Weight Power Supply 3.3 lbs/1.5 kg Hand Tool 3 oz/85 g Contents 971HA SMT Hot Air Station (Includes LT428 Hot Air Tip) Accessory Kit Includes: PAS53 Pod Air Switch, requires 20-80 psi PD533 Tool Pod PR570 Flow Regulator and Meter, SCFH WT620 Tip Wrench, 1/4 Socket WT624 Tip Wrench, Dual Open End, 1/4 & 5/16 WP556 WIGAPRY Low Static Computer Aid To rework SMD s, use LT428 tip For touch up rework, use small SMD soldering tip For more information on replacement parts, specifications & features, see CRIB NOTES on pages 28-29. 24 DESOLDERING LONER ATMOSCOPE SMT Hot Air Station

1032 LONER ATMOSCOPE SMT Hot Air Station A versatile hot air station that runs on shop air or nitrogen. Small and easy to use, the 1032 works well on everything from small chip caps to 84-pin PLCC devices. Requires clean and dry shop air, 90 psi max Cost-effective Uses a wide variety of nozzles Adapts to foot switch operation Expandable to include soldering iron Wide range of temperatures allows for: - Heating of shrink tubes - Fast shaping of plastics - Fast melting of glue - Touch up after flow soldering - Clearing solder bridges between etches of circuit board Specifications for Model 1032 Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 70W 120V, 95W 400 F-800 F/205 C-427 C ±6 F/±3 C See page 27 for various applications Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 4.2 W x 8.2 H x 10 D 107 mm x 208 mm x 254 mm Weight Power Supply PS537 2.7 lbs/1.23 kg Hot Air Hand Tool FA069 6 oz/170 g Contents PS537 FA069 PD525 SH230 Power Supply Hot Air Hand Tool (Includes LT428 Hot Air Tip) Tool Pod Sponge Holder with LN230 Liner, RS199 Cleaning Sponge and RS243 Pad Accessory Kit Includes: RB641 Shim Blade for ST706 WS630 SMD Pull Wire for ST706 ST706 SMD Tool WT620 Tip Wrench, 1/4 Socket WT624 Tip Wrench Dual Open End, 1/4 & 5/16 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 28-29. DESOLDERING LONER ATMOSCOPE SMT Hot Air Station 25

MCS100HA LONER ATMOSCOPE Master Control Hot Air System A computer-controlled high performance hot air system that features digital accuracy for precise temperature and air flow control. Great for ISO9000 requirements. Requires clean and dry shop air or nitrogen, 80 psi max Easy to read 4 lines x 16 character LCD Auto-calibration feature allows precise hands-free calibration of hot air temperature Can test and calibrate other hot air stations Easy to read and control air flow meter, SCFH ON/OFF air flow switch automatically activates when tool is removed from pod Connector system for easy tool replacement features standard connector for K-type thermocouple related accessories Unique collar system easily converts to contact, heavy-duty, and fume exhaust soldering Specifications for Model MCS100HA See page 27 for various applications Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 30W - 100W 24V, 45W 200 F-900 F/93 C-482 C ±6 F/±3 C Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 4.2 W x 10 H x 10 D 107 mm x 254 mm x 254 mm Weight Power Supply 4.8 lbs/2.2 kg Hot Air Tool 3 oz/85 g Contents MCS100HA PR570 PD533 PAS53 Master Control Hot Air System (Includes LT428 Hot Air Tip) Air Flow Regulator & Meter, SCFH Tool Pod Tool Pod Air Switch Accessory Kit Includes: FX635 Soldering Tool Fixture RB641 Shim Blade for ST706 ST706 SMD Tool SDS100 Sensor Docking System TPL09 Sensor Locator for Hot Air Calibration WS630 SMDPull Wire for ST706 WT620 Tip Wrench, 1/4 Socket WT624 Tip Wrench, Dual Open End, 1/4 & 5/16 HP375 High Performance Contact Soldering Tip 26 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 28-29. DESOLDERING LONER ATMOSCOPE Master Control Hot Air System

PRECISE CALIBRATION of hot air is achieved with the SDS100 Sensor Docking System and TPL09 Sensor Locator. This system also calibrates other soldering stations and can store in memory up to four tip temperatures and tip styles. Once calibrated, there is no need to recalibrate between tip changes. SMT REWORK IS QUICK AND CLEAN. The LT428 hot air tip is the standard tip installed on the 1036, 1032, 971HA and MCS100HA. Using nitrogen instead of shop air reduces oxidation and leaves cleaner solder joints. DIRECT CONTACT REWORK TIPS can be used on the 1036DX, 1036, 1032 and MCS100HA. This is possible by changing collars and selecting the best CROWN tip for the job at hand. Use CROWN tips on four-sided components like PLCC s and QFP s. NON-CONTACT REWORK is achieved by using an LT572 or LU572 dual flow adjustable tip. These tips have hot air directed to the leads not the component. The LT572 tip application can be used on the 1036, 1032, 971HA and MCS100HA. The LU572 tip can be used on the 1036DX. Both tips are bendable to tailor fit a wide variety of component sizes. For more information on replacement parts, specifications & features, see CRIB NOTES on pages 28-29. DESOLDERING Applications for LONER ATMOSCOPE SMT Rework Stations 27

Crib Notes for SMT Hot Air Work Stations 1. Specifications Mil-Specs Low Static ESD-Safe Control Circuit 2. Spare Parts for 1036 and 1032 DOD-STD-2000-1B, WS-6536E, MIL-STD-2000 DOD-STD-1686, DOD-HDBK-263 Closed Loop Zero Crossing Part Number Description AF511 Low static muffler filter CC355 Chamber coil FA069 Hot air hand tool HS307 Low static silicone hose, 1/8 i.d. HT495 Hot tube LT428 Hot air turbo tip OS139 O-ring (set of 2) PD525 Tool pod PS537 Power supply for 1032 PS542 Power supply for 1036 RC349 Collar for handle, vinyl grip RS199 Cleaning sponge RS321 Retaining sleeve SR028 Power cord for FA069 SR030 Clear handle for FA069 SR033 Circuit board, 120V SR081 Vinyl foam sleeve SR102 Heater assembly, 120V SR257 Pressure gauge for 1032 4. Spare Parts for 971HA Part Number Description HS307 Low static silicone hose, 1/8 i.d. LT428 Hot air turbo tip LTC71 Tip collet PAS53 Pod air switch PD533 Tool pod PR570 Air flow regulator and meter RCS75 Retaining collar sleeve assembly RS199 Cleaning sponge SR001 O-ring for heater assembly,.3 i.d. SR240 O-ring for handle,.5 i.d. SR574 Heater assembly, 120V SR579 Handle SR620 Hot air hand tool 15002W95 Circuit board, 120V 5. Spare Parts for MCS100HA Part Number Description HS307 Low static silicone hose, 1/8 i.d. LT428 Turbo tip PAS53 Pod air switch PD533 Tool pod PR570 Air flow regulator and meter RS199 Cleaning sponge 3. Spare Parts for 1036DX Part Number Description AF040 Foam filter (set of 10) AF110 Filter assembly AF629 Felt filter (set of 10) HS308 Hose, polyurethane, 3/32 i.d. LP250 Pick-up tool LU26 Medium turbo tip PD532 Tool holder for pick-up tool PD533 Tool pod RS199 Cleaning sponge SPS12 Suction cup, 1/8 dia. SPS25 Suction cup, 1/4 dia. SR062 O-ring for hand tool SR138 Transformer SR362 Hot air hand tool SR394 Heater assembly, 24V SR487 Regulator valve switch SR521 Collar SR535 Pump 15242W53H9 Circuit board, 24V 6. Additional Features The 1036DX, MCS100HA and 971HA can be used for contact or hot air soldering applications Easy maintenance and replacement Modular design for easy service UL listed 18 month warranty Made in USA 28 DESOLDERING SMT CRIB NOTES

Crib Notes for SMT Hot Air Work Stations NOTE: ALL HOT AIR HAND TOOLS (EXCEPT FOR THE 1036DX) ARE CONFIGURED TO USE HOT AIR TIPS WITH EXTERNAL THREADS. ADAPTERS MAY BE REQUIRED FOR HOT AIR TIPS WITH INTERNAL THREADS. 7. CROWN Tips INTERNAL THREADS May be used for both Contact and Hot Air Soldering MUST BE USED WITH LUA35H HEAT ACCUMULATOR CROWN Fork CROWN Tunnel CROWN Quad Part No. width x gap SMD pack CT12.07 x.10 (1.7mmx 2.3mm) SOT-23 CT25.11 x.21 (2.7mm x 5.3mm) SOT-89 CT31.14 x.07 (3.4mm x 1.8mm) 1206, 1210 CT504.20 x.18 (5.1mm x 4.6mm) SOIC-8 CT510.20 x.41 (5.1mm x 10.4mm) SOIC-14, 16 CT919.34 x.74 (8.6mm x 18.8mm) SOJ-28 CT1010 CT1818 CT2626 8. SMT Hot Air Tips EXTERNAL THREADS Jet Part No. side x side.40 x.40 (10.3mm x 10.3mm) PLCC-20.70 x.70 (17.9mm x 17.9mm) PLCC-44 1.0 x 1.0 (25.4mm x 25.4mm) PLCC-68 Hole Dia. L W 10. Turbo Hot Air Tips INTERNAL THREADS LU25 Small.03 (.8 mm) hole dia. LU26 Medium.04 (1.0 mm) hole dia. LU27 Large.06 (1.5 mm) hole dia. LU30 Hot Air Contact Needle Laminar flow for very fine soldering & clearing solder bridges. 11. Adjustable Hot Air Tips LT style has EXTERNAL THREADS LU style has INTERNAL THREADS LT572 / LU572 Dual Flow.04 /1.0 mm hole dia. 1.25 /31.8 mm max. gap LT571/ LU571 Long Flow Bendable.04 /1.0 mm hole dia. 1.1 /27.9 mm nozzle length Use WT624 for bending the nozzles of Dual Flow Adjustable and Long Flow Bendable Tips to accomodate most SMD sizes. Fan Dual LT427 LT432 LT426 LT436 LT526 LT536.02 1/64 in. 0.6 mm.04 3/64 in. 0.9 mm.02 gap 1/64 in.5 mm gap.02 gap 1/64 in..5 mm gap.03 1/32 in. 0.8 mm.05 3/64 in. 1.2 mm.38 3/8 in 9.5 mm.06 1/16 in. 1.5 mm.30 5/16 in. 7.6mm.65 21/32 in. 16.5 mm.30 5/16 in. 7.6 mm.65 21/32 in. 16.5 mm n/a n/a.19 3/16 in. 4.8 mm.43 7/16 in. 10.9 mm.13 1/8 in. 3.2 mm.35 23/64 in. 8.9 mm 12. Quadra Flow Hot Air Tips EXTERNAL THREADS Place over SMD to reflow solder inches mm pack LT456.50 x.50 12.7 x 12.7 PLCC-28 1/2 x 1/2 LT458.70 x.70 17.8 x 17.8 PLCC-44 45/64 x 45/64 LT459.80 x.80 20.3 x 20.3 PLCC-52 51/64 x 51/64 LT460 1.0 x 1.0 25.4 x 25.4 PLCC-68 1 x 1 LT468.66 x.90 16.8 x 22.9 QFP-100 21/32 x 29/32 LT488 1.17 x 1.17 29.7 x 29.7 QFP-144 111/64 x 111/64 LCCC-84 LT493.45 x.85 11.4 x 21.6 SOJ-32 29/64 x 55/64 9. TIP ADAPTER LUA73 required for 1036DX when using EXTERNAL THREADED TIPS. TIP ADAPTER HPA02 required for 971HA & MCS100HA when using INTERNAL THREADED TIPS. 13. Suction Cups For LP250 Low static silicone Part No. face size SPS12 Low static 1/8"/3.2mm dia. SPS25 Low static 1/4" /6.4mm dia. For complete list of tips and tip set-ups, see Form No. 800 DESOLDERING SMT CRIB NOTES 29

EDSYN set out to build the best, fastest and most powerful vacuum impulse desoldering station available anywhere. We achieved that goal and went beyond it with the development of the new ZD500DX. You can see and feel the EDSYN Quality from the moment you first pick up the hand tool. Being a leader means setting the benchmark - time and time again. It is a pattern we have grown accustomed to since EDSYN patented the Original Deluxe SOLDAPULLT and launched an industry revolution nearly 40 years ago. EDSYN Quality 30 DESOLDERING

ZD500DX SOLDAPULLT Self-Contained Deluxe Hot Tip Desoldering Station, Page 32 DESOLDERING DESOLDERING 31

ZD500DX Self-Contained Deluxe Hot Tip Desoldering Station A self-contained, high performance and cost-efficient desoldering station that delivers maximum heat transfer with zero crossing circuitry for ESD-safe operation. Powerful 70W high output PTC element makes heavy multi-layer boards easy to desolder Adjustable hand tool design provides comfortable working angles Powerful vacuum pulse (implosion) from stored vacuum in hose, 21 Hg minimum Single burn resistant cord for power and vacuum External calibration helps with ISO9000 compliance Specifications for Model ZD500DX Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 95W - 200W 24V, 70W 400 F-800 F/205 C-427 C ±6 F/±3 C Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 5.0 W x 8.5 H x 9.0 D 127 mm x 216 mm x 229 mm Weight Power Supply PS501 6 lbs/2.7 kg Desoldering Hand Tool HT500-2 11 oz/312 g Contents To reach deep, dense and compact areas, use the ZD111 desoldering tip as shown above PS501 Power Supply HT500-2 Hot Tip Desoldering Hand Tool (Includes ZD13 desoldering tip) SH232 Sponge Holder with R199 Cleaning Sponge Accessory Kit Includes: WT623 Tip Wrench, Dual Open End, 1/4 & 3/4 WT619 Tip Wrench for Retaining Sleeve WP556 WIGAPRY Low Static Computer Aid CS468 Tip Cleaning Shaft for Desoldering Tips CS468-1 Tip Cleaning Shaft for Small Desoldering Tips AN122 Anti-Seize Compound OL111 O-Ring Lube MS229 Mica Sheet for HT500-2 AF629 Felt Filter for AF110 AF625 Felt Filter for HT500-2 AF040 Foam Filter for AF110 32 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 39-41. DESOLDERING SOLDAPULLT Self-Contained Hot Tip Desoldering Station

ZD505V Hot Tip Desoldering Station A high performance and cost-efficient desoldering station that delivers maximum heat transfer with zero crossing circuitry for ESD-safe operation. Requires clean and dry shop air, 60-90 psi Powerful 70W high output PTC element makes heavy multi-layer boards easy to desolder Adjustable hand tool provides comfortable working angles External calibration makes ISO9000 compliance easier Single burn resistant cord for power and vacuum Specifications for Model ZD505V Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 20W - 150W 24V, 70W 400 F-800 F/205 C-427 C ±6 F/±3 C Tip-to-Ground Voltage Leakage/Resistance Contents < 2mV/< 2 ohms Overall Dimension 5.0 W x 9.5 H x 9.0 D 127 mm x 241 mm x 229 mm Weight Power Supply PS900-1 4.1 lbs/1.8 kg Desoldering Hand Tool HT500 11 oz/312 g Vacuum Generator PM100 11.5 oz/327 g PS900-1 HT500 PM100 Power Supply, 24V Hot Tip Desoldering Hand Tool (Includes ZD13 Desoldering Tip) Vacuum Generator Accessory Kit Includes: WT623 Tip Wrench, Dual Open End, 1/4 & 3/4 WT619 Tip Wrench, for Retaining Sleeve WP556 WIGAPRY Low Static Computer Aid CS468 Tip Cleaning Shaft for Desoldering Tips CS468-1 Tip Cleaning Shaft for Small Desoldering Tips AN122 Anti-Seize Compound OL111 O-Ring Lube MS229 Mica Sheet for HT500 AF629 Felt Filter for AF110 AF625 Felt Filter for HT500 AF040 Foam Filter for AF110 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 39-41. DESOLDERING SOLDAPULLT Hot Tip Desoldering Station 33

DS117/DS217 AUTO-VAC DS317/DS417 SILVERSTAT AUTO-VAC Power Head and Holder Features Requires vacuum source Continuous suction from vacuum source when trigger is pressed Self cleaning Large chamber reduces clogging and minimizes maintenance DS317/DS417/DS517/ZD100 are designed for desoldering static safe sensitive components DS517 has a short, slim aluminum barrel and threaded replacement tip ZD100 desoldering tool features: - Adjustable hand tool for comfortable working angles - Quick and easy replacement tiplet - Two-stage filter system Contents DS517 LOW STATIC AUTO-VAC DS117 PH177 PH178 DS217 PH245 PH182 Power Head with DT113 Standard Tip Power Head Holder Power Head with DT114 Micro Tip Power Head Holder ZD100 AUTO-VAC Quick Change DS317 PH246 PH184 DS417 PH201 PH202 Power Head with LS197 Standard Tip Power Head Holder Power Head with LS215 Micro Tip Power Head Holder DS517 PH358 PH247 ZD100 Power Head with LS561 Micro Tip Power Head Holder ZD100-1 Power Head with LS135 Replacement Tip PH100 Power Head Holder 34 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 39-41. DESOLDERING AUTO-VAC Vacuum Powered Desoldering Tools and Holders

VP171/VS171A/VS174 ATMOSCOPE Vacuum Generators VP171 VP171 and VS171A ESD-safe construction Requires clean and dry shop air, 60-90 psi/4.1-6.2 bar 15-22 in. Hg/381-559 mm Hg quiet vacuum Automatic shut-off mechanism The VP171 has a large vacuum tank to support six AUTO-VAC desoldering stations 10.0 L x 6.2 H x 7.6 D 254 mm x 173 mm x 193 mm 2.9 lb/1.3 kg VS171A TYPICAL SET-UP VP171 ATMOSCOPE vacuum generator with DS317 and ZD100 8.3 L x 4.1 H x 6.8 D 211 mm x 104 mm x 174 mm 1.4 lb/636 g VS174 TYPICAL SET-UP VS171A ATMOSCOPE vacuum generator with ZD505 VS174 4.0 L x 4.2 H x 10 D 102 mm x 107 mm x 254 mm 1.1lb/500 g ESD-safe construction Requires clean and dry shop air, 60-90 psi 4.1-6.2 bar Quiet three-stage high efficiency filtration system for fume extraction Vacuum inlet for VS174: 3/16-1/4 i.d., 4.8 mm - 6.3 mm i.d. hose TYPICAL SET-UP VS174 ATMOSCOPE vacuum generator with 971FX For more information on replacement parts, specifications & features, see CRIB NOTES on pages 39-41. DESOLDERING ATMOSCOPE Vacuum Generators 35

DS017 Deluxe The Original Deluxe desoldering tool Designed for heavy duty, high volume applications High efficiency, durable construction Retractable shaft guide for portability and easy storage PT109/PT209/PT309 Length - 13 /330 mm Weight - 3.5 oz/99 g Lightweight, petite barrel for smaller hands PT209 is a micro-tip model PT309 has 2 longer reach for desoldering components located in deep areas US140/US240 Universal Delivers powerful vacuum impulse Single-handed loading system Adjustable loading stroke to reduce hand strain US240 is a micro-tip model SS750 Standard Metric Challenger High quality, low cost Designed for desoldering basic electronic components Ideal for hobbyist Easy to maintain Length - 12 /304 mm Length - 8 /203 mm Length - 8.5 /216 mm Weight - 2.5 oz/71 g Weight - 2.0 oz/57 g Weight - 1.5 oz/43 g Replacement Tip DS017 SOLDAPULLT PT109 PT209 PT309 US140 US240 SS750 LRT14 i.d. =.125 /3.2 mm L = 2.00 /50.8 mm MRT16 i.d. =.084 /2.4 mm L =.536 /13.6 mm SRT12 i.d. =.125 /3.2 mm L =.536 /13.6 mm SRT751 i.d. =.100 /2.5 mm L =.875 /22.2 mm O-Ring OB207 (use for replacement tiplet) ODS31 OSB32 OS130 Use OL111 O-Ring Lube for lubrication 36 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 39-41. SOLDAPULLT DESOLDERING Hand Desoldering Pumps for Static Sensitive Components

AS196 SILVERSTAT Static safe conductive plating Designed for heavy duty, high volume applications High efficiency, durable construction Length - 13 /330 mm Weight - 3.5 oz/99 g Retractable shaft guide for portability and easy storage DS017LS Low Static Deluxe Length - 13 /330 mm Length - 8 /203 mm Length - 8.5 /216 mm Weight - 3.5 oz/99 g Weight - 2.0 oz/57 g Weight - 1.5 oz/43 g Molded from conductive material High efficiency and durable construction Retractable shaft guide for portability and easy storage US340 Low Static Universal Powerful vacuum Low static barrel Single-handed loading system Adjustable loading stroke to reduce hand strain SS350/SS750LS Standard Metric Low Static Challenger High quality, low cost Both SS350 and SS750LS are designed for single-handed operation The SS350 has aluminum barrel for easy cleaning Replacement Tip AS196 DS017LS SOLDAPULLT US340 SS350 SS750LS LS197 i.d. =.125 /3.2 mm L =.536 /13.6 mm LS363 i.d. =.125 /3.2 mm L =.536 /13.6 mm LS751 i.d. =.100 /2.5 mm L =.875 /22.2 mm O-Ring ODS31 OB207 (use for replacement tiplet) OS130 Use OL111 O-Ring Lube for lubrication For more information on replacement parts, specifications & features, see CRIB NOTES on pages 39-41. SOLDAPULLT DESOLDERING Hand Desoldering Pumps for Static Sensitive Components 37

DS017QC Deluxe Quick Change Low cost tip replacement, slim nose for longer reach Designed for heavy duty, high volume applications High efficiency, durable construction Retractable shaft guide for portability and easy storage DS017LQ Low Static Deluxe Quick Change Molded from conductive material Length - 13.0 /330 mm Weight - 3.5 oz/99 g Designed for heavy duty, high volume applications High efficiency, durable construction Retractable shaft guide for portability and easy storage Length - 13.0 /330 mm Weight - 3.5 oz/99 g PT109MT Metric Tip Powerful vacuum Low cost tiplet replacement Includes QG751 squee-gee tip Retractable shaft for portability and easy storage Length - 11.5 /292 mm Weight - 2.0 oz/57 g PT409MT Metric Tip Static Safe Molded from conductive material Low cost tiplet replacement Includes QG754 squee-gee tip Retractable shaft for portability and easy storage Length - 11.5 /292 mm Weight - 2.0 oz/57 g Replacement Tiplet DS017QC SOLDAPULLT DS017LQ PT109MT PT409MT SRT035 i.d. =.125 /3.2 mm L =.850 /21.6 mm SRT754 i.d. =.125 /3.2 mm L =.850 /21.6 mm LS135 i.d. =.125 /3.2 mm L =.850 /21.6 mm LS753 i.d. =.125 /3.2 mm L =.850 /21.6 mm O-Ring ODS31 OSB32 Use OL111 O-Ring Lube for lubrication For more information on replacement parts, specifications & features, see CRIB NOTES on pages 39-41. 38 SOLDAPULLT DESOLDERING Hand Desoldering Pumps for Static Sensitive Components

Crib Notes for ZD500DX/ZD505V Desoldering Stations 1. Specifications 4. Additional Features Mil-Specs Low Static ESD-Safe Control Circuit 2. Easy Maintenance Desoldering Tip DOD-STD-2000-1B, WS-6536E, MIL-STD2000 DOD-STD-1686, DOD-HDBK-263 Closed Loop Zero Crossing Always use genuine EDSYN tips. Use CS468/CS468-1/CS468-2 cleaning shafts to keep tips clear and free from oxidation build up. Large delivery tube reduces clogging Easy maintenance and replacement Modular design for easy service UL listed 18 month warranty Made in USA To prevent tip from seizing, remove tip from housing and wipe or brush off any oxidation build up. 5. General Purpose Tips Part Number Hole Diameter Length Keep tips tinned to make them last longer and perform better. Keep temperature as low as possible. ZD12 ZD13.03 /0.8 mm.04 /1.0 mm.50 /12.7 mm Filters Replace AF625 replacement filter when it starts turning yellow. ZD14.06 /1.5 mm 3. Spare Parts Part Number Description HT500/HT500-2 Desoldering hand tool AC737 Accumulator bushing AF625 Replacement filter set (10) CS468 Large dia. cleaning shaft CS468-1 Small dia. cleaning shaft CS468-2 Extra small dia. cleaning shaft FC640 Filter cartridge assembly HT01 Delivery tube HT500H Heater head assembly MS229 Replacement mica sheets OL111 O-Ring lube RS383 Retaining sleeve SR120 Heating element SR136 Desoldering head housing SR335 Valve assembly WT619 Tip wrench 6. Funnel Tips Part Number Hole Diameter ZD107.02 /0.5 mm ZD112.03 /0.8 mm 7. Surface Mount Desoldering Tips Part Number Hole Diameter ZD58.13 /3.3 mm ZD60.15 /3.8 mm 8. Economy Replacement Tips Part Number Hole Diameter Length.48 /12.2 mm Length.55 /14.0 mm Length PS900-1/PS501 Power Supply ZD25.03 /0.8 mm.39 /9.9 mm RS199 SR082 Replacement sponge Circuit board ZD27.07 /1.8 mm PM100 AF629 AF040 SR636 ATMOSCOPE Vacuum generator (For ZD505V only) Felt filter Foam filter Silencer end cap For complete list of tips and tip set-ups, see Form No. 800 DESOLDERINGDesoldering CRIB NOTES 39

Crib Notes for AUTO-VAC Desoldering Stations DS117, DS217, DS317, DS417, DS517, ZD100 1. Easy Maintenance 3. Additional Features Hand Tool Clean barrels and o-rings on a regular basis Always lube o-ring with OL111 To avoid tip burn out, do not rest the desoldering tip on the soldering iron when desoldering. Instead, hold the tip just above the joint being desoldered. PH117, PH245, PH246, PH201 power heads weigh 3 oz/85 g PH358 hand tool weighs 2 oz/57 g PH178, PH182, PH184, PH202 power head holders weigh 15 oz/426 g PH247 power head holder weighs 14 oz/398 g Made in USA 2. Spare Parts Part Number AF137 AF139 AF385 AV060 CB138 CB138M CS332 DT113 DT114 FC640 HS320 LQ125 LS135 LS197 LS215 LS561 OL111 SR194 SR195 SR196 SR212 SR213 SR214 SR215 SR216 Description Filter for DS117, DS217, DS317, DS417 Quick change filter for ZD100 Filter for DS517 Trigger assembly kit for DS117, DS217, DS317, DS417, Cleaning shaft for DS117, DS317 Cleaning shaft for DS217, DS417 Cleaning shaft for ZD100 Replacement tip for DS117 Replacement tip for DS217 Filter cartridge assembly for ZD100 Low static silicone hose for DS117,DS217, DS317, DS417, DS517 (sold by the foot) Clip cartridge with 3 - LS135 tiplets for ZD100 Replacement tiplet for ZD100 Replacement tip for DS317 Replacement tip for DS417 Replacement tip for DS517 O-ring lube Replacement barrel for DS317 Replacement barrel for DS417 Baffle for DS117, DS217, DS317, DS417 Replacement barrel for DS117 Replacement barrel for DS217 Replacement barrel for DS517 Yoke, valve adapter for DS517 Trigger valve assembly for DS517 40 DESOLDERINGDesoldering CRIB NOTES

Crib Notes for ATMOSCOPE Vacuum Generators SOLDAPULLT Manual Desoldering Hand Tools 1. Easy Maintenance 3. Additional Features Hand Tool Vacuum Generators Clean barrels and o-rings on a regular basis Always lube o-ring with OL111 To avoid tip burn out, do not rest the desoldering tip on the soldering iron when desoldering. Instead, hold the tip just above the joint being desoldered. Replace filters AS196, DS017/LS/QC/LQ, PT109/209/309 and PT109/409MT have retractable shaft guides for easy storage Powerful vacuum implosion Vacuum generators are non-electrical and have few moving parts Strong, lightweight construction Made in USA 2. Spare Parts SOLDAPULLT Hand Tool Part Number SR040 SR284 SR286 SR287 SR288 SR289 SR290 SR291 SR292 SR293 SR296 SR297 SR391 SR392 SR537 SR660 SR661 Description Barrel for PT109 Barrel for US140 Barrel for DS017 Barrel for AS196 Barrel for PT209 Trigger/Plunger assembly for US140 Trigger/Plunger assembly for US240 Trigger/Plunger assembly for US340 Trigger/Plunger assembly for DS017LS, DS017LQ, AS196 Trigger/Plunger assembly for DS017, DS017QC Barrel for US240 Barrel for US340 Trigger/Plunger assembly for PT109 Trigger/Plunger for PT209 Barrel for DS017LS Barrel for DS017QC Barrel for DS017LQ ATMOSCOPE Vacuum Generator Part Number Description HS320 Vacuum hose for VP171 and VS171A OV367 O-ring set for VP267 SR596 Condenser pad for VS174 VF134 Felt filter for VS174 VF188 Foam filter for vacuum tank VM033 Foam filter for VS174 VM034 Muffler element for VP268 VP189 Plugs for vacuum tank VP267 REGUBLASTER assembly for VP171 and VS171A VP268 QUIETURI assembly for VP171 and VP171A VTG59 Vacuum gauge VTG63 Gasket for VP171 tank VT190 Vacuum tank for VP171 DESOLDERINGDesoldering CRIB NOTES 41

One day the telephone rang. A customer needed to integrate a combination of EDSYN tools for a unique site preparation problem. The result of that conversation became the TSX70. This highly effective SMT reflow workstation has remarkable on-demand vacuum features while providing clean work areas in limited spaces for complex packages and fine pitch devices. As an added bonus, technicians with even novice skill can consistently deliver superior professional results. Being a leader means listening to customers and fulfilling their needs - time and time again. It is a pattern we have grown accustomed to since EDSYN patented the Original Deluxe SOLDAPULLT and launched an industry revolution nearly 40 years ago. EDSYN Quality 42 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 50-51.

TSX70 SOLDAVAC SMT Reflow Vacuum Workstation, Page 44 MULTI-TASKING For more information on replacement parts, specifications & features, see CRIB NOTES on pages 50-51. DESOLDERING 43

TSX70 SMT Reflow Vacuum Workstation The world s most practical workstation. User friendly and effective in site preparation for BGA s, PLCC s, QFP s and other fine pitch devices. Nitrogen can be used to reduce oxidation and bridging Dual controls for hot gas and tip temperatures to produce even heating of board Use for site preparation and reinstallation of QFP s Recommended and utilized by major manufacturers and subcontractors in high volume BGA programs Specifications for Model TSX70 Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 39W - 330W 24V, 45W and 24V, 70W 400 F-800 F/205 C-427 C ±6 F/±3 C Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 5.8 W x 10 H x 8.8 D 147 mm x 254 mm x 224 mm Weight Power Supply TSX70-2 6.2 lbs/2.8 kg Desoldering Hand Tool TSX70-1 13.5 oz/383 g Contents TSX70-2 TSX70-1 Power Supply Solder Handling Tool (Includes TSX713 tip) Accessory Kit Includes: WT623 Tip Wrench, Dual Open End, 1/4 & 3/4 WT624 Tip Wrench, Dual Open End, 1/4 & 5/16 WP556 WIGAPRY Low Static Computer Aid MS229 Mica Sheet For TSX70-1 AF629 Felt Filter For AFX73 AF625 Felt Filter For TSX70-1 AF624 Felt and Foam Filter For AFX73 CSX70 Maintenance Tool With Cleaning Shaft OL111 O-Ring Lube For Trigger Housing In TSX70-1 The TSX70 is very effective for preparation of BGA s. Video available (part no. VT51). 44 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 50-51. SOLDAVAC SMT Reflow Vacuum Workstation

TSX70 SMT Reflow Vacuum Applications The TSX70, with the TSX713 tip, can be used to reattach a surface mount component with solder wire and hot nitrogen or hot air. The TSX70, with the TSX717 tip, can be used for reaching components partially hidden or located in crowded areas. For more information on replacement parts, specifications & features, see CRIB NOTES on pages 50-51. DESOLDERING SOLDAVAC SMT Reflow Vacuum Workstation 45

ZD906 ATMOSCOPE and LONER Shop Air Powered Rework Station This compact rework center includes a soldering tool, a powerful desoldering tool and a versatile hot air pencil for SMT rework applications. One station does it all. 60-90 psi clean and dry air supply required (requires 2 shop air inputs) Detachable handles for easy service Powerful heating elements for multi-layer boards and thick heat-sinks Ideal rework center for the technician needing soldering, desoldering and hot air in one small unit Specifications for Model ZD906 Power Requirements Power Rating Heater Rating HT500 LST11 FA069 Temperature Range Temperature Regulation 120V, 60Hz 38W - 380W 24V, 70W 24V, 53W 120V, 95W 400 F-800 F/205 C-427 C ±6 F/±3 C Desoldering Hot Air Soldering Tip-to-Ground Voltage Leakage/Resistance Overall Dimension Contents < 2mV/< 2 ohms 7.5 W x 9 H x 9.5 D 197 mm x 229 mm x 241 mm Weight Power Supply PS902 5.4 lbs/2.4 kg Desoldering Hand Tool HT500 11 oz/312 g Hot Air Hand Tool FA069 6 oz/85 g Soldering Hand Tool LST11 3 oz/85 g PS902 Power Supply HT500 Hot Tip Desoldering Hand Tool (Includes ZD13 tip) PM100 Vacuum Generator PM200 Pressure Regulator PD528 Tool Pod FA069 Hot Air Tool (Includes LT428 tip) LST11 Soldering Hand Tool (Includes LT375 tip) Accessory Kit Includes: WT623 Tip Wrench, Dual Open End, 1/4 & 3/4 WT619 Tip Wrench for Retaining Sleeve WP556 WIGAPRY Low Static Computer Aid WT620 Tip Wrench, 1/4 Socket CS468 Tip Cleaning Shaft for Desoldering Tips CS468-1 Tip Cleaning Shaft for Small Desoldering Tips AN122 Anti-Seize Compound OL111 O-Ring Lube MS229 Mica Sheet for HT500 AF629 Felt Filter for AF110 AF625 Felt Filter for HT500 AF040 Foam Filter for AF110 46 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 50-51. SOLDAPULLT Shop Air Powered Rework Center

ZD905V/ZD905V-HP LONER Hot Tip Desoldering Stations A soldering/desoldering station designed for maximum performance with a minimum of bench space. Requires shop air. ZD905V Independent controls for both soldering and desoldering tools High performance in a small footprint Clean and dry shop air required, 60-90 psi ZD905V-HP has a high performance heater configuration for fast heat recovery Specifications for Model ZD905V/ZD905V-HP Power Requirements Power Rating Heater Rating HT500 LST11 LST12 Temperature Range Temperature Regulation 120V, 60Hz 38W - 310W 24V, 70W 24V, 53W 24V, 45W 400 F-800 F/205 C-427 C ±6 F/±3 C Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 5.5 W x 9 H x 9.5 D 140 mm x 229 mm x 241 mm Weight Power Supply PS902 4.5 lbs/2.0 kg Desoldering Hand Tool HT500 11 oz/312 g Soldering Tool LST11/12 3 oz/85 g ZD905V-HP with CROWN tip ZD905V with extended desoldering tip Contents PS902 Power Supply HT500 Hot Tip Desoldering Hand Tool (Includes ZD13 tip) PM100 Vacuum Generator PD528 Tool Pod LST11(ZD905V) Soldering Tool (Includes LT375) LST12(ZD905V-HP) Soldering Tool (Includes HP375) Accessory Kit Includes: WT623 Tip Wrench, Dual Open End, 1/4 & 3/4 WT619 Tip Wrench for Retaining Sleeve CS468 Tip Cleaning Shaft for Desoldering Tips CS468-1 Tip Cleaning Shaft for Small Desoldering Tips AN122 Anti-Seize Compound OL111 O-Ring Lube MS229 Mica Sheet for HT500 AF629 Felt Filter for AF110 AF625 Felt Filter for HT500 AF040 Foam Filter for AF110 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 50-51. DESOLDERING SOLDAPULLT, LONER Hot Tip Desoldering Stations 47

ZD500HA/ZD500HA-3 ATMOSCOPE and LONER Self-Contained Hot Tip Desoldering and Hot Air Rework Station This dual/triple self-contained, high performance and cost-efficient hot air and desoldering station delivers maximum heat transfer with zero crossing circuitry for ESD-safe operation. ZD500HA Powerful 70W high output PTC element makes heavy multi-layer boards easy to desolder Adjustable desoldering hand tool design provides comfortable working angles Powerful vacuum pulse (implosion) from stored vacuum in hose, 21 Hg minimum Specifications for Model ZD500HA Power Requirements 120V, 60Hz Power Rating 95W - 340W Heater Rating HT500 24V, 70W FA069 120V, 95W CL1080 (ZD500HA-3) 120V, 95W Temperature Range Temperature Regulation 400 F-800 F/205 C-427 C ±6 F/±3 C Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 6.5 W x 8.5 H x 10.0 D 165 mm x 216 mm x 254 mm Weight Power Supply PS501 6 lbs/2.7k g Desoldering Hand Tool HT500-2 11 oz/312 g Hot Air Tool FA069 6 oz/170 g Soldering Tool (ZD500HA-3) CL1080 6 oz/170 g ZD500HA-3 includes CL1080 soldering tool (page 17) ZD500HA-3 with a hot air Quadra Flow tip to preheat a multi-layer circuit board using a CROWN tip to remove SMD Contents PS501 Power Supply HT500-2 Hot Tip Desoldering Hand Tool (Includes ZD13 desoldering tip) FA069 SMT Hot Air Hand Tool (Includes LT428 hot air tip) CL1080 (ZD500HA-3) Soldering Tool (Includes LT375 tip) PD529 Tool Holder for Hot Air PA233 Dovetail Extension (For ZD500HA-3) PD528 Tool Pod for Soldering Tool (For ZD500HA-3) Accessory Kit Includes: WT623 Tip Wrench, Dual Open End, 1/4 & 3/4 WT620 Tip Wrench, 1/4 Socket WT618 Tip Wrench, Dual Open End 1/4 & 1/2 WT619 Tip Wrench for Retaining Sleeve WP556 WIGAPRY Low Static Computer Aid CS468 Tip Cleaning Shaft for Desoldering Tips CS468-1 Tip Cleaning Shaft for Small Desoldering Tips AN122 Anti-Seize Compound OL111 O-Ring Lube MS229 Mica Sheet for HT500-2 AF629 Felt Filter for AF110 AF625 Felt Filter for HT500-2 AF040 Foam Filter for AF110 48 For more information on replacement parts, specifications & features, see CRIB NOTES on pages 50-51. SOLDAPULLT, ATMOSCOPE and LONER Rework Station

1052HP/1052 LONER ATMOSCOPE SMT Hot Air and High Performance Soldering Station A versatile hot air and soldering station that runs on shop air or nitrogen. Small and easy to use, the 1052HP works well on everything from small chip caps to 84-pin PLCC devices. Requires clean and dry shop air, 80 psi max Precise air flow control Uses a wide variety of nozzles Direct tip-heater configuration for fast heat-up and recovery during soldering applications Wide range of temperatures allows for: - Heating of shrink tubes - Fast shaping of plastics - Fast melting of glue - Touch up after flow soldering - Clearing solder bridges between etches of circuit board Specifications for Model 1052HP Power Requirements Power Rating Heater Rating Temperature Range Temperature Regulation 120V, 60Hz 30W - 440W 120V, 53W 400 F-800 F/205 C-427 C ±6 F/±3 C 1052 is a SMT hot air and standard soldering station Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 5.2 W x 8.2 H x 10 D 132 mm x 208 mm x 254 mm Weight Power Supply 4.7 lbs/2.1 kg Hand Tool 3 oz/85 g NON-CONTACT REWORK using LU572 dual-flow adjustable tip that is bendable to tailor fit a wide variety of component sizes. DIRECT CONTACT REWORK TIPS can be used by changing collars and selecting the best CROWN tip for the job at hand. Use CROWN tips on four-sided components like PLCC s and QFP s. Contents 1052HP PD533 PD528 SH230 SMT Hot Air and High Performance Station (Includes LU428 Hot Air Tip and HP375) Tool Pod for SMT Hot Air Tool Tool Pod for Soldering Tool Sponge Holder with LN230 Liner, RS199 Cleaning Sponge and RS243 Pad Accessory Kit Includes: RB641 Shim Blade for ST706 WS630 SMD Pull Wire for ST706 ST706 SMD Tool Helper WT620 Tip Wrench, 1/4 Socket WT624 Tip Wrench, Dual Open End, 1/4 & 5/16 WP556 WIGAPRY Computer Aid For more information on replacement parts, specifications & features, see CRIB NOTES on pages 50-51. DESOLDERING SMT Hot Air and High Performance Soldering Station 49

Crib Notes for Multi-Tasking Stations 1. Specifications 4. Spare Parts for TSX70 50 Mil-Specs DOD-STD-2000-1B, WS-6536E, Part Number Description MIL-STD-2000 AFX73 Condenser and filter for TSX70-1 Low Static ESD-Safe DOD-STD-1686, DOD-HDBK-263 AF629 Felt filter (set of 10) AF040 Foam filter (set of 10) Control Circuit Closed Loop Zero Crossing FC639 End cap assembly MS229 Mica sheet OS730 O-ring set for valve assembly 2. Easy Maintenance OS731 O-ring for heater bushing and end cap RSX72 Retaining sleeve, heater assembly Soldering Tip Always use genuine EDSYN RS199 Cleaning sponge soldering tips. SC525 Solder cone SH232 Sponge holder To prevent tip from seizing, SR120 Heater element remove tip from heater and wipe or SR130 Poppet (o-ring included) brush off any oxidation build up. SR131 Spring SR266 End cap for filter Keep tips tinned to make them last SR335 Valve assembly longer and perform better. SR356 Hose and wiring assembly SR387 Transformer Keep temperature as low as SR106 Fuse, 250V, 3A possible. SR304 Flux condenser and cooling fin SR341 Heater assembly, 24V SR403 Circuit board for cooling fan Cleaning Sponge Replace RS199 cleaning sponge to SR404 Top cover minimize tip contamination. SR405 Bottom base SR408 Solenoid and vacuum ejector assembly 3. Spare Parts for 1052HP/1052 SR414 Fan assembly Part Number Description TSX70-1 Hand tool TSX70-2 Power supply Power Supply TSX713 Desoldering tip PD528 Tool pod for soldering tool 15242W45 Circuit board, 24V, 45W (left side) PD533 Tool pod for hot air tool 15242W70H10 Circuit board, 24V, 70W (right side) RS199 Cleaning sponge SC581 Solder collector SR283 Hose, 1/8 i.d. polyurethane SR387 Transformer, dual primary 5. Spare Parts for ZD906, ZD500HA, ZD905 SR405 Bottom base for power supply SR556 Top cover for power supply Part Number Description SR560 Valve regulator assembly FA069 SMT hot air tool SR563 Fuse, 250V, 3.15A HT500 Hot tip desoldering tool 15002W95 Circuit board, 120V HT500-2 Hot tip desoldering tool for ZD500HA 15242W53H9 Circuit board, 24V LST11 Soldering tool for ZD905 and ZD906 PM100 Vacuum generator SMT Hot Air Hand Tool PM200 Pressure regulator HS304 Hose, 1/16 i.d. low static silicone SR106 Fuse, 250V, 3A HS308 Hose, 3/32 i.d. polyurethane SR387 Transformer LU26 Turbo hot air tip 15242W53 Circuit board for soldering, 24V SR057 Handle 15242W70 Circuit board for desoldering, 24V SR062 O-ring SR394 Heater assembly, 120V Spare Parts for the desoldering hand tool for ZD906, ZD500HA, SR521 Collar ZD905V are on page 39. SR525 Hose, 1/4 i.d. low static silicone Spare Parts for the SMT hot air hand tool for ZD906 and ZD500HA Soldering Hand Tool are on page 28. HP375 LONER high performance standard spade tip HPS72 Retaining sleeve for 1052HP LT375 LONER standard spade tip 6. Additional Features RS372 Retaining sleeve for 1052 SR057 Handle Modular design for easy service SR060 Heater assembly, 120V SR062 O-ring UL listed SR063 Vinyl sleeve SR064 Collar 18 month warranty SR280 Tool cord SR298 Soldering tool, complete assembly Made in USA SR525 Hose, 1/4 i.d. low static silicone For more information on replacement parts, specifications & features, see CRIB NOTES on pages 50-51. Multi-Tasking CRIB NOTES

Crib Notes for Multi-Tasking Stations 7. SMT Reflow Vacuum Tips FOR TSX70 9. High Performance Soldering Tips FOR ZD905V-HP, 1052HP ONLY Part Number width head length HP371.03 (0.8 mm).57 (14.5 mm) Fine spade Part No. hole diameter length TSX713.05 (1.3 mm).43 (10.9 mm) Standard nozzle TSX715.09 (2.3 mm).55 (14.0 mm) Focus nozzle TSX716.02 (0.5 mm).80 (20.3 mm) Long reach needle nozzle TSX717.01 (0.3 mm).63 (16.0 mm) Small oval nozzle TSX718.02 (0.5 mm).80 (20.3 mm) Medium oval nozzle HP444.04 (1.0 mm).83 (21.1 mm) Mid-length fine spade HP375.06 (1.5 mm).57 (14.5 mm) Standard spade HP376.12 (3.0 mm).57 (14.5 mm) Wide spade HP441.20 (5.1 mm).55 (14.0 mm) Long wide spade HP429-1.02 (0.5 mm).76 (19.3 mm) Angled mid-length probe HP439-1.03 (0.8 mm).51 (13.0 mm) SMD angle thin probe HP374.05 (1.2 mm).57 (14.5 mm) SMD probe 8.General Purpose Soldering Tips Part Number width head length LT392.01 (0.3 mm) 1.13 (28.8 mm) Extra-long needle probe LT382.02 (0.5 mm).62 (15.7 mm) Long cone LT603.02 (0.5 mm).69 (17.5 mm) Mid-length needle probe LT374.03 (0.8 mm).48 (12.2 mm) Standard probe LT446.03 (0.8 mm).48 (12.2 mm) SMD probe LT439.03 (0.8 mm).50 (12.7 mm) Thin SMD probe LT444.04 (1.0 mm).78 (19.8 mm) SMD mid-length fine spade LT375.06 (1.5 mm).48 (12.2 mm) Standard spade LT431.07 (1.8 mm).74 (18.9 mm) Mid-length spade LT376.12 (3.0 mm).48 (12.2 mm) Short stubby spade LT445.03 (0.8 mm).48 (12.2 mm) SMD angle face LT399.16 (4.0 mm).59 (15.0 mm) Large angle face HP399.21 (5.3 mm).39 (9.9 mm) Large angle face 10. CROWN Tips Can be used for both Contact and Hot Air Soldering. MUST BE USED WITH LUA35H HEAT ACCUMULATOR. CROWN Fork CROWN Tunnel CROWN Quad CROWN Hammer Head Part No. width x gap SMD pack CT12.07 x.10 (1.8mm x 2.5mm) SOT-23 CT25.10 x.21 (2.5mm x 5.3mm) SOT-89 CT31.14 x.07 (3.6mm x 1.8mm) 1206, 1210 CT504.20 x.18 (5.1mm x 4.5mm) SOIC-8 CT510.20 x.41 (5.1mm x 10.4mm) SOIC14, 16 CT919.34 x.74 (8.6mm x 18.9mm) SOJ-28 side x side CT1010.40 x.40 (10.2mm x 10.2mm) PLCC-20 CT1818.70 x.70 (17.8mm x 17.8mm) PLCC-44 CT2626 1.0 x 1.0 (25.4mm x 25.4mm) PLCC-68 width CH12.47 (11.9mm) n/a CH17.65 (16.5mm) n/a CH43 1.69 (43mm) n/a HOT AIR TIPS FOR ZD906 AND ZD500HA ARE ON PAGE 29. DESOLDERING TIPS FOR ZD906, ZD500HA, ZD905V ARE ON PAGE 39. For more information on replacement parts, specifications & features, see CRIB NOTES on pages 50-51. DESOLDERING Multi-Tasking CRIB NOTES 51

When your name is on the line in today s electronics universe, precise performance and adaptability count. EDSYN is dedicated to manufacturing the world s finest quality products in accordance to the line voltage and plug requirements our customers need all around the globe. Look for the EDSYN Quality symbol for innovative engineering and commitment to design stamped into our wide array of hand tools, stations, systems and accessories. Being a leader around the world means earning customer trust in EDSYN Quality products and service - time and time again. It is a pattern we have grown accustomed to since EDSYN patented the Original Deluxe SOLDAPULLT and launched an industry revolution nearly 40 years ago. EDSYN Quality 52

Performance Icons, EDSYN Inc. Soldering Multi-Tasking Hot Gas Desoldering Hot Air SMT Multi-Tasking Hot Tip Desoldering Desoldering EDSYN Quality Hot Tip Desoldering Innovative Accessories INTERNATIONAL DESOLDERING 53

951DX LONER Deluxe Soldering Station Low voltage soldering station 24V hand tool meets low voltage requirements Accurate temperature control External calibration helps with ISO9000 compliance Modular assembly of parts for easy maintenance Wide variety of soldering and SMT CROWN tips available Detachable handles for easy replacement 951DP LONER Deluxe High Performance Soldering Station 24V high performance hand tool Direct tip-heater configuration results in quick heatup and recovery Accurate temperature control External calibration helps with ISO9000 compliance Modular assembly of parts for easy maintenance Wide variety of soldering and SMT CROWN tips available 971DX LONER Deluxe High Performance Temperature Controlled Soldering Station 24V hand tool Direct tip-heater configuration results in quick heatup and recovery Advanced circuit design provides precise temperature control and external calibration Fume extraction and hot air conversion kits (sold separately) offer economy and versatility New front loading design makes tip change faster and easier 54 International Products

Specifications for Model 951DX 951DX-100 951DX-230 Options for 951DX-230 Power Requirements Power Rating Heater Rating 100V, 50Hz 230V, 50Hz 18W - 160W 18W - 160W 24V, 53W 24V, 53W 951DX-230B British Standard Plug 951DX-230P No Plug Weight Overall Dimension Temperature Range Temperature Regulation Tip-to-Ground Voltage Leakage/Resistance 1.8 kg 104 mm x 216 mm x 254 mm 205 C-427 C < 2mV/< 2 ohms ±3 C Specifications for Model 951DP 951DP-100 951DP-230 Options for 951DP-230 Power Requirements Power Rating Heater Rating 100V, 50Hz 230V, 50Hz 17W - 170W 17W - 170W 24V, 45W 24V, 45W 951DP-230B British Standard Plug 951DP-230P No Plug Weight Overall Dimension Temperature Range Temperature Regulation Tip-to-Ground Voltage Leakage/Resistance 1.8 kg 104 mm x 216 mm x 254 mm 205 C-427 C < 2mV/< 2 ohms ±3 C Specifications for Model 971DX 971DX-100 971DX-230 Options for 971DX-230 Power Requirements Power Rating Heater Rating 100V, 50Hz 230V, 50Hz 18W - 160W 18W - 160W 24V, 53W 24V, 53W 971DX-230B British Standard Plug 971DX-230P No Plug Weight Overall Dimension Temperature Range Temperature Regulation Tip-to-Ground Voltage Leakage/Resistance 1.8 kg 104 mm x 216 mm x 254 mm 205 C-427 C < 2mV/< 2 ohms ±3 C DESOLDERINGInternational Products 55 Dual High Performance Soldering Stations

ZD905V LONER Hot Tip Desoldering and Soldering Station Independent controls for both soldering and desoldering tools High performance in a small footprint Requires clean and dry shop air, 60-90 psi External calibration helps with ISO9000 compliance Wide variety of nozzles and tips available ZD505V Hot Tip Desoldering Station Requires clean and dry shop air, 60-90 psi Powerful 70W high output PTC element makes heavy duty multi-layer boards easy to desolder Adjustable hand tool provides comfortable working angles External calibration helps with ISO9000 compliance Burn resistant tool power cord and vacuum hose ZD500DX Self-Contained Deluxe Hot Tip Desoldering Station Adjustable hand tool design provides comfortable working angles Powerful 70W high output PTC element makes heavy duty multi-layer boards easy to desolder External calibration helps with ISO9000 compliance Single burn-resistant tool power cord and vacuum hose 56 International Products

Specifications for Model ZD905V ZD905V-100 ZD905V-230 Options for ZD905V-230 Power Requirements Power Rating Heater Rating 100V, 50Hz 230V, 50Hz 38W - 310W 38W - 310W 24V, 70W 24V, 70W ZD905V-230B British Standard Plug ZD905V-230P No Plug Weight Overall Dimension Temperature Range Temperature Regulation Tip-to-Ground Voltage Leakage/Resistance 2.7 kg 140 mm x 229 mm x 241 mm 205 C-427 C < 2mV/< 2 ohms ±3 C Specifications for Model ZD505V ZD505V-100 ZD505V-230 Options for ZD505V-230 Power Requirements Power Rating Heater Rating Weight 100V, 50Hz 230V, 50Hz 20W - 150W 20W - 150W 24V, 70W 24V, 70W 2.4 kg ZD505V-230B British Standard Plug ZD505V-230P No Plug Overall Dimension Temperature Range Temperature Regulation Tip-to-Ground Voltage Leakage/Resistance 127 mm x 241 mm x 229 mm 205 C-427 C < 2mV/< 2 ohms ±3 C Specifications for Model ZD500DX ZD500DX-100 ZD500DX-230 Options for ZD500DX-230 Power Requirements Power Rating Heater Rating 100V, 50Hz 230V, 50Hz 95W - 200W 95W - 200W 24V, 70W 24V, 70W ZD500DX-230B British Standard Plug ZD500DX-230P No Plug Weight Overall Dimension Temperature Range Temperature Regulation Tip-to-Ground Voltage Leakage/Resistance 3.0 kg 127 mm x 216 mm x 229 mm 205 C-427 C < 2mV/< 2 ohms ±3 C DESOLDERINGInternational Products 57

1032 LONER ATMOSCOPE SMT Hot Air Station Requires clean and dry shop air, 90 psi max Cost-effective Uses a wide variety of nozzles Adapts to foot switch operation Expands to include optional soldering iron Wide range of temperatures allows for: - Heating of shrink tubes - Clearing solder bridges - Fast shaping of plastics between circuit board - Fast melting of glue etches - Touch up after flow soldering 1036 LONER ATMOSCOPE Self-Contained SMT Hot Air Station Self-contained with built-in air source Zero voltage switching Uses a wide variety of nozzles Expands to include optional soldering iron Powerful 95 watt heater for larger components, up to 84 pins ESD-safe TSX70 SMT Reflow Vacuum Workstation Nitrogen can be used to reduce oxidation and bridging Dual controls for hot gas and tip temperatures to produce even heating of board Use for site preparation and reinstallation of QFP devices Recommended by major manufacturers and subcontractors in high volume BGA programs Perfect for solder bridge removal and fine pitch device reattachment 58 International Products

Specifications for Model 1032 1032-100 1032-230 Options for 1032-230V Power Requirements Power Rating Heater Rating 100V, 50Hz 230V, 50Hz 70W 70W 24V, 53W 230V, 95W 1032-230B British Standard Plug 1032-230P No Plug Weight Overall Dimension Temperature Range Temperature Regulation Tip-to-Ground Voltage Leakage/Resistance 1.4 kg 104 mm x 208 mm x 254 mm 205 C-427 C < 2mV/< 2 ohms ±3 C Specifications for Model 1036 1036-100 1036-230 Options for 1036-230 Power Requirements Power Rating Heater Rating Weight 100V, 50Hz 230V, 50Hz 125W 125W 120V, 95W 230V, 95W 2.2 kg 1036-230B British Standard Plug 1036-230P No Plug Overall Dimension Temperature Range Temperature Regulation Tip-to-Ground Voltage Leakage/Resistance 132 mm x 216 mm x 254 mm 205 C-427 C < 2mV/< 2 ohms ±3 C Specifications for Model TSX70 TSX70-100 TSX70-230 Options for TSX70-230 Power Requirements Power Rating Heater Rating Weight 100V, 50Hz 230V, 50Hz 39W - 330W 39W - 330W 24V, 70W 24V, 70W 24V, 45W 24V, 45W 3.1 kg TSX70-230B British Standard Plug TSX70-230P No Plug Overall Dimension Temperature Range Temperature Regulation Tip-to-Ground Voltage Leakage/Resistance 147 mm x 254 mm x 224 mm 205 C-427 C < 2mV/< 2 ohms ±3 C DESOLDERINGInternational Products 59

FXF11-100/FXF11-230 ATMOSCOPE FUMINATOR Bench Top Fume Extractor Fan with Circular Base Specifications for Model FXF11-100/FXF11-230 Power Requirements Overall Dimension FXF11 12VDC 140 mm x 305 mm x 140 mm Weight FXF11 0.49 kg Contents FXF10 SR571 SR572 SR542 ATMOSCOPE FUMINATOR Bench Top Fume Extractor Fan with Primary Rotating and Carbon Activated Filters. Complete Fan Assembly with Filters, 199 g 12VDC Wall Transformer for 100V 12VDC Wall Transformer for 230V Stand for the FXF11 with Solder Peg (Solder spools sold separately) FXF12-100/FXF12-230 ATMOSCOPE FUMINATOR Bench Top Fume Extractor Fan with SH232 Tray Specifications for Model FXF12-100/FXF12-230 Power Requirements Overall Dimension FXF12 12VDC 140 mm x 305 mm x 178 mm Weight FXF12 0.58 kg Contents FXF10 SR571 SR572 SR541 ATMOSCOPE FUMINATOR Bench Top Fume Extractor Fan with XF02 Primary Rotating and XF03 Charcoal Impregnated Filters. Complete Fan Assembly with Filters, 199 g 12VDC Wall Transformer for 100V 12VDC Wall Transformer for 230V Stand for the FXF12 with Solder Peg and SH232 Sponge Holder 60 International Products

Key Features for Models FXF11/FXF12 Compact high efficiency two-stage charcoal impregnated filtration system Powerful fan motor draws fume away from operator Ultra-quiet operation Rotating front filter provides filtration 8x better than a stationary filter Bright front (green) and rear (yellow) LED s indicate power and air flow direction Adjustable to almost any working angle Quick filter replacement Internal safety grills Low static, ESD-safe FILTER DESIGN The foam front filter spins at the same speed as the fan blades and increases filtering capability, up to 8x greater than a stationary filter. A charcoal impregnated back filter is added for second stage filtration to neutralize fume odor. The maximum air flow with both filters installed is 21 cfm. VARIABLE POSITIONING The fan assembly allows a range of 180 tilt positioning. NOTE: Extending the fan farther from the base will cause instability to the unit. Using a spool of solder on the peg increases stability. DESOLDERINGInternational Products 61

Take a basic idea and make it better. Make it quieter. Make it smaller. EDSYN engineers call their new spin on fume extraction the ATMOSCOPE FUMINATOR Bench Top Fume Extractor Fan. The unique spinning effect of the filter makes it work like a filter eight times its size. Versatile design allows for personal cooling with clean filters or blow drying a circuit board after cleaning the pads. The arm affords a 180 tilt range and points air flow precisely where you need it so you can breathe easier. Comes in two styles to suit your needs. Works alone or can adapt easily to most in-house fume extraction systems. Being a leader means bringing innovative ideas to life - time and time again. It is a pattern we have grown accustomed to since EDSYN patented the Original Deluxe SOLDAPULLT and launched an industry revolution nearly 40 years ago. EDSYN Quality 62 DESOLDERING

FXF11 ATMOSCOPE FUMINATOR Bench Top Fume Extractor Fan (optional accessories shown not included), Page 64 ACCESSORIES DESOLDERING 63

FXF11 FXF11/FXF12 ATMOSCOPE FUMINATOR Bench Top Fume Extractor Fans A compact high efficiency two-stage charcoal impregnated filtration system that delivers optimum filtering capability at the fume source. Powerful 12V fan motor draws fume away from operator Ultra-quiet operation Rotating front filter provides filtration 8x better than a stationary filter FXF10 model features only the fan assembly. Stand and base are not included. Bright front (green) and rear (yellow) LED s to indicate power and air flow direction Adjustable to almost any working angle Quick filter replacement Internal safety grills Low static, ESD-safe Specifications for Model FXF11/FXF12/FXF10 Power Requirements 12VDC FXF12 (Solder spools sold separately) Overall Dimension FXF11 5.5 W x 12 H x 5.5 D 140 mm x 305 mm x 140 mm FXF12 5.5 W x 12 H x 7 D 140 mm x 305 mm x 178 mm FXF10 3.75 W x 4.5 H x 2.6 D 95 mm x 114 mm x 66 mm Weight FXF11 FXF12 FXF10 1.09 lbs/.49 kg 1.28 lbs/.58 kg 7 oz/199 g Contents FXF10 SR538 SR542 SR541 ATMOSCOPE FUMINATOR Bench Top Fume Extractor Fan with XF02 Primary Rotating and XF03 Charcoal Impregnated Filters. Complete Fan Assembly with Filters, 7 oz/199 g. 12VDC Wall Transformer Stand for the FXF11 with Solder Peg Stand for the FXF12 with Solder Peg and SH232 Sponge Holder XF01 Filter Set one each XF02 and XF03 XF02 Primary Rotating Filter (set of 5) XF03 Charcoal Impregnated Stationary Filter (set of 5) 64 DESOLDERING Accessories - ATMOSCOPE FUMINATOR Extractor Fans

FG2000 KLATCH Flex Grip A uniquely versatile vise. Able to securely hold and position objects at almost any angle making it far superior than many other holding devices. Single knob for precise three dimensional positioning of flex arm Fine tuning knob for minute angular adjustments Solder spool holder (fits two sizes) Tray for cleaning sponge or other components Attachments available to fasten EDSYN FUMINATOR Extractor Fan or camera type mounted instruments Flex arms extend 9 /229 mm Jaws open to almost 3 /70 mm Single knob positioning (Solder spool sold separately) Secure gripping capability Minute angular adjustment Magnetic base option DESOLDERING Accessories - KLATCH Flex Grip 65

MS410/MS412 Temperature Measurement Systems A compact digital temperature meter system that is suitable for measuring and calibrating soldering tip temperature as well as other temperature controlled products. MS412 Auto polarity display Low battery indication Data hold feature Helps with ISO 9000 compliance Contents Displays in Celsius or Fahrenheit 3 1/2 digit display 0.1 resolution up to 199.9 MS410 MS412 Calibration System with FX633 Tool Fixture for a variety of Soldering Tools (carrying case included) Calibration System with FX635 Tool Fixture for EDSYN LONER Soldering Tools (carrying case included) SDS100 Sensor Docking System (Includes TP795 and TP791) TP795 Temperature Sensor (Includes WL675) TP791 Small Area Surface Temperature Probe WL675 Wire Loop (K-Type Thermocouple Wires) TI680 Temperature Meter WP556 WIGAPRY Low Static Computer Aid DS299 KLATCH Dip Squeezer Items listed above are included for both systems Specifications for Model MS410/MS412 Accessories Specifications Type K Type Thermocouple Range -58 F - 1999 F/-50 C - 1300 C Unit Display C or F Sampling Rate Electrical Specifications Maximum input voltage for thermocouple 2.5 times per second 23 C ±5 at 90% relative humidity 60VDC, 24VAC Operating Temperature 32 F - 122 F/0 C - 50 C Storage Temperature 10 F - 140 F/-12 C - 60 C Power Supply Overall Dimensions Weight 9VDC, 200 Hours continuous use battery life (included) 5.6 W x 2.8 H x 1.3 D 142 mm x 71 mm x 33 mm 8.5 oz/241 g TP792 Submersible Temperature Probe (Sold separately).125 Dia. x 7.5 3 mm x 191 mm 1832 F/1000 C Maximum Temperature TP794 Large Surface Area Temperature Probe (Sold separately).590 Dia. x 3.4 15 mm x 86 mm 1382 F/750 C Maximum Temperature Thermocouple Material Contact Type Accuracy Minimum Temperature K(CA) NiCR/NiAL Insulation Type ±.75% or ±2.2 C -58 F/-50 C Compensating Lead Wire -20 C - 90 C Handle 302 F/150 C 66 DESOLDERING Accessories - Temperature Measurement Systems

Accessories For MS410/MS412 FX635 Tool Fixture for MS412 TP791 Small Area Surface Temperature Probe TP792 Submersible Temperature Probe TP794 Large Area Surface Temperature Probe TP795 Temperature Sensor with WL675 Wire Loops Accessories For FXF10/FXF11/FXF12 XF01 Filter Set XF02 FUMINATOR Primary Rotating Filter XF03 Charcoal impregnated Stationary Filter XF02 FUMINATOR Primary Rotating Filter XF03 Charcoal Impregnated Stationary Filter (Set of 5) (Set of 5) Accessories DESOLDERING - Temperature Measurement Systems/Atmoscope Fuminators 67

AFX74 ATMOSCOPE Fume Filter Tank for Fume Extraction WP286 WIGAPRY Desoldering Aid CS468/CS468-1/CS468-2 Tip Cleaning Shafts for HT500 CS468.05 /1.3 mm Dia WP556 WIGAPRY Low Static Computer Aid CS468-1.025 /.64 mm Dia. CS468-2.010 /.25 mm Dia. (not shown) PD528 Tool Pod for All EDSYN Soldering Stations SC581 Included PD529 Tool Holder for Quadra-Flow Tips, CROWN Tips, or Hammer Head Tips PD533 Tool Pod for Hot Air Tools 1051, 1052, 1036DX SC581 Replacement Solder Debris Collector PD532 Tool Holder for LP200, LP200S and LP250 Pick-Up Tools PD525 Tool Pod for Hot Air Stations using FA069 OPT812 Conversion Accessory for Dual to Triple Soldering Station (Includes PD528 and PA233) PA233 Dovetail Extension Bracket (1 pair) for Converting a Dual Station to a Triple Station. PA233-1 is only a single bracket. SD302 Solder Dispenser with TH100 Tip Holder SD300 Solder Dispenser TH101Tip Holder and Storage Peg TH100 Tip Holder (Solder spool and soldering tips sold separately) (Solder spool sold separately) (Soldering tips sold separately) 68 DESOLDERING Accessories

VA175 Air and Vacuum Pick-Up System A revolutionary pick and place system that uses direct air pressure or vacuum to pick-up components. Requires clean and dry shop air, 60-90 psi ESD-safe Quiet operation Ultra-lightweight tool Equipped with vacuum release valve Easy adjustment knob for vacuum or air pressure Use as a blower for cleaning or cooling hot components Variety of suction cup sizes available Uses high flow suction to pick-up small parts Lift and cool down components by using positive air pressure New Techniques Award EDSYN Hummerworks has rated this product The Most Unique New Tool in its current product line. Our preliminary tests show that the use of the VA175 stimulates new ideas and procedures that address the changing environment of electronic production. The VA175 Air and Vacuum Pick-Up Tool was designed for those that enjoy interacting with the tools they use to accomplish more with less... The VA175 features a comfortable ultra-lightweight hand tool that works well on a variety of SMD sizes using air pressure or vacuum. Positive air pressure causes the component to fly into the pick-up tool thereby lifting and cooling at the same time. DESOLDERING Accessories - SOLDAVAC Air and Vacuum Pick-up System 69

LP200 SOLDAVAC Lifter by Pen Vac Portable Vacuum Pick-Up Tool LP200S SOLDAVAC Lifter by Pen Vac Stealth Portable Vacuum Pick-Up Tool (Includes 3 suction cups and lifting needles) (Includes 2 suction cups and lifting needles) LP250 SOLDAVAC Pick-Up Tool for SMD components (Requires Vacuum Source) LP251 SOLDAVAC Pick-Up Tool with SMD Component Release Valve (Requires Vacuum Source) (Includes PD532 Pick-Up Tool Holder) (Includes PD532 Pick-Up Tool Holder) ST706 SMD Tool to lift off SMD while using Hot Air Tools ST707 Soldering Tool Maintenance Brush ST800 SMD Helper to remove SMD s while using Soldering Tools or Hot Air Tools (ST707-1 Replacement Stainless Steel Brush) (BWS22 Set of two Pull Wires and two Shim Blades included) 70 DESOLDERING Accessories - SOLDAVAC Pick-Up Vacuum Tools

SP125 OCTAVAC Low Static Silicone Suction Cup SP250 OCTAVAC Low Static Silicone Suction Cup SP375 OCTAVAC Low Static Silicone Suction Cup Face Size 1/8 Dia 3.2 mm 1/4 Dia 6.4 mm 3/8 Dia 9.5 mm LP200 LP200S LP250 LP251 LN250 Small Lifting Angled Needle with SP125 LN260 Medium Lifting Angled Needle with SP250 LN270 Large Lifting Angled Needle with SP375 1/8 Dia 3.2 mm 1/4 Dia 6.4 mm 3/8 Dia 9.5 mm LN251 Small Lifting Straight Needle with SP125 LN261 Medium Lifting Straight Needle with SP250 LN271 Large Lifting Straight Needle with SP375 1/8 Dia 3.2 mm 1/4 Dia 6.4 mm 3/8 Dia 9.5 mm SPS12 Stealth Low Static High Temperature Suction Cup SPS25 Stealth Low Static High Temperature Suction Cup LN270S Stealth Lifting Needle with SPS12 and SPS25 Suction Cups 1/8 Dia 3.2 mm 1/4 Dia 6.4 mm 1/4 Dia 6.4 mm DS299 KLATCH Dip Squeezers LK773H Universal Temperature Lock Knob with Adjustment Hole for LONER Soldering Stations STC84 Soldering Tip Cleaning Bar (AF039 Foam Filter and RS190 Sponge included) LK773 Universal Temperature Lock Knob without Adjustment Hole RS199 Replacement Sponge and SH230 Sponge Holder sold separately DESOLDERING Accessories - SOLDAVAC Pick-Up Vacuum Tools 71

EDSYN Customer Service Dedicated to Suit Your Needs Our customers are the reason why we are in business. That is why EDSYN is dedicated to providing precise performance technology with old-fashioned customer service. Our customer approach is designed to suit the customer s needs first. To do this we offer the following: Friendly service and a helpful attitude underscores the personalized attention EDSYN customers have come to expect. Leading edge technical knowledge from the people who engineer and manufacture the technology. The professionals at our Van Nuys, California factory have unsurpassed experience in the development, production and service of the products enclosed in this catalog. Dedication to the customer by providing service after the sale by an experienced network of sales representatives, worldwide distributors, customer service personnel, engineers, technicians and factory support. Factory warranty on our wide array of hand tools, stations, systems and accessories. We stand behind our word. Our success is derived from the customers successful use of our tools. EDSYN mutually compliments the need to succeed with in-flight product demonstrations available through the EDSYN Flight Department. Enjoy red carpet service at altitude, at your place of business or at our Van Nuys, California factory and join EDSYN s elite and growing customer base. For a demonstration of EDSYN Quality products, please contact: - Your Local EDSYN Distributor - Your Local EDSYN Sales Representative For EDSYN Factory support: Customer Service FAX: 818.997.0460 Sales Department Fax: 818.997.0895 Marketing Department Flight Department Visit our Web Site Literature & Video Requests Technical Support Tool Maintenance Tool Repairs Warranty Service Sales Special Orders Research & Development Demonstrations Administration Creative Services Advertising Meetings & Seminars In-Flight Demonstrations www.edsyn.com 72 DESOLDERING Customer Service

GLOSSARY DEFINITIONS are slanted toward the usage of EDSYN products. The meaning of any particular term may differ from a dictionary definition. ACCUMULATOR - A metal insert used inside soldering tips to increase heat storage capacity. ATMOSCOPE - EDSYN s industrial heavy duty vacuum pump. Also applies to single or multi point hot air soldering tools. BGA - Ball Grid Array. CLOSED LOOP TEMPERATURE CONTROL - Temperature regulation by means of sensor feedback. A signal that is sent to the electronic circuitry section where it is compared and power is automatically adjusted to maintain a preset temperature. CONTACT OR CONDUCTIVE SOLDERING - Method of soldering where heat is directly transferred by touching the component leads with the soldering tip. CORROSION - An oxidized film which forms on copper, especially at high temperatures. Unless removed by a flux compound, this can cause dewetting and poor solder connection. DEWETTING - A condition where molten solder will not adhere nor interact with the metal surface because of contamination. DESOLDER - To remove solder from a surface or connection by vacuum or wicking. ELECTRONIC TEMPERATURE CONTROL - Ability of a soldering tool to adjust and maintain tip temperature by using an electronic circuit. (See Closed Loop Temperature Control) DIP - Dual-In-Line Package integrated circuit. This type of device has its leads arranged in two parallel rows. HUMMERWORKS - EDSYN s Research & Development department. EROSION - The gradual dissolving of certain metals, such as copper, by molten solder. ESD-SAFE - Electrostatic Safe Discharge. Materials that distribute electrostatic charge along the part surface and quickly dissipates to the air or a ground. Most EDSYN products are made from ESD-safe materials. FPT - Fine Pitch Technology. FRONT LOADING - Method of changing soldering tip without having to remove a retaining collar or sleeve. FLUX - A compound which exhibits a mild cleansing action on copper and other metals to remove oxidized film corrosion which can cause poor solder wetting. HEAT TRANSFER - A relative term describing the ability of a soldering tip to transfer heat energy from the heating element to the solder connection. HOT AIR - Method of using hot air to promote reflow of solder used in connection with SMD rework and assembly. IC- Integrated Circuit. HOT AIR OR CONVECTIVE SOLDERING - Method of soldering where air or nitrogen is heated up then blown towards the component leads. HP - High Performance. Soldering tip configuration that allows direct tip to heater contact and reduces heat loss from heater element to soldering tip. IDLE-REST - Compact multi-purpose energy saving holders for EDSYN soldering tools. Also functions as a station with cleaning sponge, solder and wick supply. IN. HG - Inches Mercury. Unit of measurement for vacuum or air pressure. IRON PLATING - A protective plating for soldering tips to reduce solder erosion and promote long tip life. Iron plating has good solder wetability. ISO9000 COMPLIANCE - Guidelines set by the International Organization of Standards to achieve a certain level of quality before the European member country may buy or sell goods and services to another member country. KLATCH - EDSYN s special purpose holding devices such as pliers, tweezers, IC removers and vise grips. LCC - Leadless Chip Carrier. Usually a square or rectangular SMD. LEAD - The wire termination which exits a component or connector. Also referred to as pin. LEAD PATTERN - The arrangement of the component wire terminations usually in parallel rows. Some multi-pin IC s have their leads arranged in circular pattern. LONER - EDSYN s temperature controlled soldering instruments. LOW STATIC POTENTIAL - A term which describes various desoldering hand tools which exhibit negligible static charge build-up on their surface. ESD-safe desoldering tools are recommended when working with sensitive SMD s. MULTI-TASKING - The ability to simultaneously perform different soldering applications from a single workstation. PLCC - Plastic Leadless Chip Carrier. PSI - Pounds Per Square Inch. Unit of measurement for air pressure. PREHEATER - Device used to bring up the initial temperature of the component leads before desoldering occurs. POD - A unique heat retaining holder which holds the soldering tool during interim use. It provides a protective environment for the heating element and tip, which promotes longer tip life. QFP - Quad Flatpack. QUICK CHANGE - Action taken to remove and replace tips quickly. REFLOW - Heating of solder, either in paste or solid form, to make a solder connection. SMD - Surface Mounted Device. SMT - Surface Mounted Technology. SOIC - Small Outline Integrated Circuit. SOLDAPULLT AUTOVAC - EDSYN s continuous vacuum desoldering tool for repetitive production line solder removal. SOLDAPULLT - EDSYN s desoldering hand tool. SOLDAPULLT lll - EDSYN s medium capacity desoldering tool for general purpose repair work and R & D. SOLDAPULLT SUCCESSOR - EDSYN s rugged medium capacity desoldering tool for assembly line and professional desoldering needs. SOLDAPULLT UNIVERSAL - EDSYN s light to medium duty desoldering tool for routine assembly line rework and for the traveling service technician. SOLDAVAC - EDSYN s medium duty desoldering tool for industrial applications, hobby and kit building specialties. STD - Abbreviation for Standard. TEMPERATURE CONTROLLED - The unique design feature of EDSYN s LONER soldering instruments which compares and self-regulates tip temperature to a preset standard. TEMPERATURE RANGE - Temperature attainment between a low and high dial setting. THERMAL REGULATION - The difference between the high and low temperature cycle of a soldering tip with respect to its desired temperature at idle (no load). Unregulated soldering tools have relatively poor thermal regulation at the tip. The EDSYN LONER temperature controlled soldering instruments have excellent thermal regulation which exceed the requirements of MIL-S-45743E; (less than 10 F high cycle above the control temperature when in idling or stand-by mode). VACUUM PULSE - Amount of air pulled into a chamber at a certain velocity. WETTING ACTION - The ability of molten solder to combine readily with the metals in the solder connection. Clean metal surfaces which have been fluxed properly promote excellent solder wetting. Dirt, grease and oxidation inhibit the natural solvent action of molten solder. This is characterized by bare spots or balling up of solder on the connection. WIGAPRY - EDSYN s soldering and desoldering tool aids. ZERO CROSSING CIRCUITRY - Circuit designed to switch on the instant the AC supply voltage passes through zero, minimizing radio frequency interference generated at switch closure. ZD - Zero Defect. UNIT CONVERSION FORMULAS C = 5/9 ( F-32) F = 9/5 ( C) + 32 mm = inch x 25.4 kg = pound 2.2046 gm = ounce x 28.35 cm 3 = in 3 0.061 bar = psi 14.50377 pascal = psi x 6894.757 watt = btu/hr x 0.293 DESOLDERING Glossary of Technical Terms 73

Part No.... Page 1032... 25 1032-100... 58,59 1032-230... 58,59 1032-230B... 58,59 1032-230P... 58,59 1036... 23 1036-100... 58,59 1036-230... 58,59 1036-230B... 58,59 1036-230P... 58,59 1036DX... 22 1052... 49 1052HP... 49 15002W95....18,28,50 15242W45... 50 15242W53... 50 15242W53H9... 28,50 15242W70... 50 15242W70H10... 50 951DP... 54 951DP-100... 54,55 951DP-230... 54,55 951DP-230B...54,55 951DP-230P...54,55 951DX... 11 951DX-100... 54,55 951DX-230... 54,55 951DX-230B...54,55 951DX-230P...54,55 951HP... 12 951SX... 10 952DX... 11 952HP... 12 952HX... 13 952SX... 10 971... 14 971DX... 54 971DX-100... 54,55 971DX-230... 54,55 971DX-230B...54,55 971DX-230P...54,55 971FX... 15 971HA... 24 972... 16 A AC737... 39 AF039... 71 AF040... 28.39,50 AF110... 28 AF137... 40 AF139... 40 AF385... 40 AF511... 28 AF625... 39 AF629... 28.39,50 AFX73... 50 AFX74... 68 AS196... 37 AV060... 40 B BWS22... 70 C CB138... 40 CB138M... 40 CC355... 28 CH12... 19,51 CH17... 19,51 CH43... 19,51 CL1080... 17 CL1180... 17 CL1481... 17 CL1484... 17 CS332... 40 CS468... 39,68 CS468-1... 39,68 CS468-2... 39,68 CT1010... 19,29,51 CT12... 19,29,51 CT1818... 19,29,51 CT25... 19,29,51 CT2626... 19,29,51 CT31... 19,29,51 CT504... 19,29,51 CT510... 19,29,51 CT919... 19,29,51 D DS017... 36 DS017LQ... 38 DS017LS... 37 DS017QC... 38 DS117... 34 DS217... 34 DS299... 71 DS317... 34 DS417... 34 DS517... 34 DT113... 40 DT114... 40 F FA069...28,50 FC639... 50 FC640... 39,40 FG2000... 65 FX633... 67 FX635... 67 FXF10... 60,61,64 FXF11... 63,64 FXF11-100/230...60,61 FXF12... 64 FXF12-100/230...60,61 H HC273... 18 HP371... 19,51 HP374... 19,51 HP375... 19,50,51 HP376... 19,51 HP399... 19,51 HP429-1... 19,51 HP439-1... 19,51 HP441... 19,51 HP444... 19,51 HPA02... 29 HPS72... 50 HS106BC... 19 HS304... 50 HS307... 28 HS308... 28,50 HS320... 40,41 HT01... 39 HT495... 28 HT500... 33,39,50 HT500-2...32,39,50 HT500H... 39 I IP481... 17 IR089... 17 L LK773... 71 LK773H... 71 LN230... 18 LN250... 71 LN251... 71 LN260... 71 LN261... 71 LN270... 71 LN270S... 71 LN271... 71 LP200... 70 LP200S... 70 LP250...28,70 LP251... 70 LQ125... 40 LRT14... 36 LS135...38,40 LS197...37,40 LS215... 40 LS363... 37 LS561... 40 LS751... 37 LS753... 38 LST11... 50 LT337BC... 19 LT340BC... 19 LT374...19,51 LT375... 18,19,50,51 LT376...19,51 LT382...19,51 LT392...19,51 LT399...19,51 LT426... 29 LT427... 29 LT428... 28 LT431...18,19,51 LT432... 29 LT436... 29 LT439...19,51 LT441BC... 19 LT444...19,51 LT445...19,51 LT446...19,51 LT456... 29 LT458... 29 LT459... 29 LT460... 29 LT468... 29 LT488... 29 LT493... 29 LT526... 29 LT536... 29 LT570BC... 19 LT571... 29 LT572... 29 LT602-1... 19 LT603...19,51 LTC71...18,28 LU25... 29 LU26... 28,29,50 LU27... 29 LU30... 29 LU571... 29 LU572... 29 LUA35H... 29,51 LUA73... 29 M MCS100...8,9 MCS100-S... 8,9 MCS100HA... 26,27 MRT16... 36 MS229... 39,50 MS410... 66 MS412... 66 O OB207... 36,37 ODS31...36,37,38 OL111... 39,40 OPT812... 68 OPT823... 18 OPT825... 18 OS130... 36,37 OS139... 28 OS730... 50 OS731... 50 OSB32... 36,38 OV367... 41 P PA233... 68 PA233-1... 68 PAS53... 28 PD525... 28,68 PD528... 18,50,68 PD529... 68 PD532... 28,68 PD533... 28,50,68 PH100... 34 PH177... 34 PH178... 34 PH182... 34 PH184... 34 PH201... 34 PH202... 34 PH245... 34 PH246... 34 PH247... 34 PH358... 34 PM100... 33,39,50 PM200... 50 PR570... 28 PS501... 32,39 PS536... 17 PS537... 28 PS542... 28 PS900-1... 33,39 PT109... 36 PT109MT... 38 PT209... 36 PT309... 36 PT409MT... 38 R RC349... 18,28 RCS71... 18 RCS75... 28 RS190... 71 RS199... 18,28,39,50,71 RS243... 18 RS271... 18 RS321... 28 RS372... 18,50 RS383... 39 74 DESOLDERING Index By Part Number

Part No.... Page RSX72... 50 S SC525... 50 SC581... 18,50,68 SD300... 68 SD302... 68 SH230... 18,71 SH230-1... 18 SH232... 50 SP125... 71 SP250... 71 SP375... 71 SPS12... 28,29,71 SPS25... 28,29,71 SR001... 28 SR019... 18 SR026... 18 SR028... 18,28 SR029... 18 SR030... 18,28 SR032... 18 SR033... 18,28 SR040... 41 SR042... 18 SR043... 18 SR054... 18 SR057... 18,50 SR058... 18 SR060... 18,50 SR062... 18,28,50 SR063... 18,50 SR064... 18,50 SR065... 18 SR070... 18 SR075... 18 SR081... 18,28 SR082... 39 SR102... 28 SR106... 50 SR120... 39,50 SR130... 50 SR131... 50 SR136... 39 SR138... 28 SR194... 40 SR195... 40 SR196... 40 SR212... 40 SR213... 40 SR214... 40 SR215... 40 SR216... 40 SR226... 18 SR240... 18,28 SR241... 18 SR243... 18 SR249... 18 SR251... 18 SR257... 28 SR266... 50 SR280... 18,50 SR281... 18 SR283... 50 SR284... 41 SR286... 41 SR287... 41 SR288... 41 SR289... 41 SR290... 41 SR291... 41 SR292... 41 SR293... 41 SR296... 41 SR297... 41 SR298... 18,50 SR302... 18 SR304... 50 SR335... 39,50 SR337... 18 SR341... 50 SR356... 50 SR362... 28 SR387... 50 SR391... 41 SR392... 41 SR394... 28,50 SR403... 50 SR404... 50 SR405... 50 SR408... 50 SR414... 50 SR462... 18 SR487... 28 SR521... 28,50 SR525... 50 SR535... 28 SR537... 41 SR556... 50 SR560... 50 SR563... 50 SR574... 18,28 SR579... 18,28 SR596... 41 SR620... 28 SR636... 39 SR660... 41 SR661... 41 SRT035... 38 SRT12... 36 SRT751... 36 SRT754... 38 SS350... 37 SS750... 36 SS750LS... 37 ST706... 70 ST707... 70 ST707-1... 70 ST800... 70 STC84... 71 T TH100... 68 TH101... 68 TP791... 67 TP792... 67 TP794... 67 TP795... 67 TSX70... 44,45 TSX70-1... 50 TSX70-100... 58,59 TSX70-2... 50 TSX70-230... 58,59 TSX70-230B... 58,59 TSX70-230P... 58,59 TSX713... 50,51 TSX715... 51 TSX716... 51 TSX717... 51 TSX718... 51 U US140... 36 US240... 36 US340... 37 V VA175... 69 VF134... 41 VF188... 41 VM033... 41 VM034... 41 VP171... 35 VP189... 41 VP267... 41 VP268... 41 VS171A... 35 VS174... 35 VT190... 41 VTG59... 41 VTG63... 41 W WL675... 67 WP286... 68 WP556... 68 WT619... 39 X XF01... 67 XF02... 67 XF03... 67 Z ZD100... 34 ZD100-1... 34 ZD107... 39 ZD112... 39 ZD12... 39 ZD13... 39 ZD14... 39 ZD25... 39 ZD27... 39 ZD500DX... 32 ZD500DX-100... 56,57 ZD500DX-230...56,57 ZD500DX-230B... 56,57 ZD500DX-230P...56,57 ZD500HA... 48 ZD500HA-3... 48 ZD505V... 33 ZD505V-100... 56,57 ZD505V-230... 56,57 ZD505V-230B... 56,57 ZD505V-230P... 56,57 ZD58... 39 ZD60... 39 ZD905V... 47 ZD905V-100... 56,57 ZD905V-230... 56,57 ZD905V-230B... 56,57 ZD905V-230P... 56,57 ZD905V-HP... 47 ZD906... 46 CREDITS Artist: Kathy Christian Photography: Michael Chiabaudo DESOLDERINGIndex By Part Number 75

EDSYN Hummerworks Research & Development Dedicated to Suit Your Needs Insightful engineering and innovative design. The ability to manufacture quality products, time and time again. Dedication to refine and improve the end result. Commitment to precise performance. These are the reasons why EDSYN tools launched an industry revolution in soldering and desoldering technology nearly 40 years ago. It is the reason why EDSYN continues to research and develop technology dedicated to suit the needs of the electronics industry. Our approach to engineering excellence is evident in the wide array of hand tools, stations, systems and accessories used in the assembly, rework and repair of all types of electronic assemblies, particularly those incorporating the use of Surface Mount Technology (SMT) and mixed technology applications. At EDSYN, research & development is our passion and the driving force behind the EDSYN name: Engineering Dedicated to Suit Your Needs. What s your need? Call Hummerworks. 76 DESOLDERING Hummerworks

Visit EDSYN s HOME PAGE @ www.edsyn.com EDSYN INC. WORLD HEADQUARTERS 15958 Arminta Street Van Nuys, California 91406 USA Telephone...818.989.2324 Fax (Sales)...818.997.0895 Fax (Service)...818.997.0460 Email...info@edsyn.com Internet...www.edsyn.com EDSYN GMBH EUROPA Finkenweg 2 D-97892 Kreuzwertheim GERMANY Telephone...49.93.42.6413 Fax...49.93.42.6417 EDSYN (UK) LTD. 32 Devonshire Road Colliers Wood London SW19 2EF ENGLAND Telephone...44.181.288.9687 Fax...44.181.288.9688

0.0K C C16 0.1 C14 0.1 P1 1K R6 470 RP1 C5.4K 10KX8 1.0 RP1 C5 5 N5098 10.0K LMC660CN C8.1 C4.01 LMC97UPK C10.01 LMC660CN 100 LMC97UPK U1 0.0K C R4 13 C2 1.0 R3 100 L3 330U L1 330U L5 330U R3 100 C167 C2 1.0 C R3 100 C2 20 R4 13 C3 1.0 U1 0.0K LMC660CN 100 C4.01 C8.1 LMC97UPK C10.01 10.0K LMC660CN.4K C16 0.1 0.0K C12.1 LMC97UPA RP1 C5 C16 0.1 R6 470 C14 0.1 P1 1K Q5 2N5098 RP1 C5 R4 13 C4 1.0 R4 13 C5 1.0 R4 13 0.0K C10.01 97JE 100 L3 330U C6100P L1 330U 0.0K RP1 C5 C6100P L1 330U L3 330U C5600P 100 C10.01 LMC97 L9 230U C8500P Performance 0.0K Products L2 570U 15958 Arminta Street Van Nuys, California 91406 Phone: 818.989.2324 FAX (Sales): 818.997.0895 FAX (Service): 818.997.0460 Email: info@edsyn.com Internet: www.edsyn.com US 9.97