Temperature Complete solutions for the most measured parameter in process automation Full support for your needs from planning to installation and operation
Complete solutions from Endress+Hauser Custom solutions for your application Temperature is the most measured parameter in process automation. Therefore, it comes as no surprise that temperature measurement technology is used across all industries. This warrants meeting a wide variety of customer requirements. Endress+Hauser rises to the challenge with full application support from the planning stage to installation and operation. Different processes require different solutions. Let us assure you that Endress+Hauser can meet your requirements. Complete temperature assemblies We offer sensor assemblies in both American and European styles for a wide range of applications. Our assemblies meet the highest industry standards for reliability, accuracy and performance. Our product offering caters to: General purpose applications such as HVAC, treatment, plastics and metal processing Explosion proof and heavy duty industries such as Chemical and Oil and Gas Refining Hygienic industry such as Food Beverage, Pharmaceutical and Life Sciences Building a partnership When you work with Endress+Hauser you experience the values of a global company with strong local ties. SIL water and you deep Our trained workforce ships to you completely assembled and tested products and our skilled experts can help you start up and service our products nationally and worldwide. We offer short delivery times thanks to our local production and assembly facilities in the United States for the North American market. With 34 sales organizations and 18 production centers globally, we make the perfect partner for global clients, skid manufacturers and OEMs. Transmitters itemp transmitters are an installation-ready solution to improve the functionality of temperature measurement by increasing accuracy and reliability when compared to direct wired sensors. Overall installation costs are lower than with direct wired sensors, since inexpensive two-conductor 4-20 ma signal wire can run over long distances instead of expensive extension or compensation wires for thermocouples. Each transmitter can be configured for a variety of sensor inputs: RTD, thermocouple, millivolt or ohm. All itemp transmitters provide long term stability < 0.05% per year. Field transmitters Highest reliability in harsh industrial environments due to dual compartment housing and compact, fully potted electronics and brilliant blue back-lit display. Head transmitters Instead of directly wiring your temperature sensors to your control system, use transmitters to reduce wiring and maintenance costs while increasing measurement accuracy. DIN rail transmitters These compact transmitters mount in confined spaces and enable better temperature measurement by converting the sensitive sensor signal and increasing its stability, while monitoring the measuring element. Approvals International certificates such as FM (USA), CSA (Canada), ATEX (Europe) Meets sanitary standards such as 3-A (USA) and EHEDG (Europe) CE Mark (EMC, Low Voltage Equipment Guideline) Explosion proof approval for installation in Div. 1 UL recognized components Ship building approval ABS (USA) and GL (Europe) NAMUR NE 43 1 2 4 5 Ó â 0 Optimizing your SIS - Safety Instrumented Systems Endress+Hauser provides SIL - Safety Integrity Level transmitters for service in SIS - Safety Instrumented Systems. SIL-2 rated temperature transmitters are standard offerings - another commitment to safety Endress+Hauser provides safety application knowledge beyond that covered by SIL methodology We can offer condition monitoring of SIL instruments to optimize SIS availability and false trip management
From power supply to field devices including... Recorders Components Displays All products and components are designed so they are not only simple to install, but easy to operate as well. From temperature sensors and transmitters to thermowells and accessories such as power supplies, displays, recorders, etc. can be purchased from one company. RIA452 Process temperature display RIA141 Digital field display PLC/Recorder Simplified model structures Endress+Hauser s philosophy makes it easy to configure a model. 0 RN221N Prosonic M FMU40 Configure a model structure to specify probes, transmitters, thermowells as a single line item Wide variety of industrial thermowells, enclosures and lead-wire style to meet your design and plant requirements The units are delivered assembled together, tested and installation ready: straight out of the box Top performing solutions over the long run. Low cost of long-term ownership On-site calibration Endress+Hauser operates calibration facilities around the world and employs mobile equipment that enables on-site calibration for: Pressure and Temperature Level Flow Liquid Analysis Temperature assemblies with calibration certificate We run the necessary cyclic calibration of measurement points following national regulations or individual operating systems. This is done either at the manufacturer s factory, locally or in our NIST accredited and internationally recognized temperature test laboratory. From simple requirements up to safetycritical GMP applications in the pharmaceutical, chemical or power industries, calibration is always traceable to national and international standards. Clearly defined standard operating procedures, exact operation and documented proof offer excellent results. Endress+Hauser will support you in completing the qualification and validation of your plant and instrumentation, leaving you to concentrate on the efficient and profitable running of your plant. 3
From micro to macro 3 mm Just a few micro-grams of highly purified precious metals are the beginning of precise temperature measurement. Modern production processes use semiconductor technology to make the production of the smallest and long-term stable thin film sensors for resistance sensor assemblies possible. Mastered variety Different processes require different solutions. Be assured that Endress+Hauser knows your requirements. From the choice of materials to the finished product From plastics, ceramics and glass to alloyed special steels and precious metals From perfectly hygienic processed surfaces up to 3D measurement systems in reactors and pressurized vessels From the smallest primary sensor to the multi-point sensor assembly High tech in detail In clean rooms and over dozens of process steps, platinum traces 100 times thinner than a human hair are transferred onto highquality ceramic substrata using semiconductor technology. They are trimmed using lasers, thermally aged and protected from pollutant penetration by a glass layer. Worldwide, from micro to macro, always at the right place at the right time. Securely packaged precision A sensor element, whether it is a sensor assembly or thermocouple, can only measure the temperature to which it is subjected. The perfect combination of the measuring element using a variety of materials, proven thermowell construction and extremely accurate transmitters guarantee the highest plant availability. The construction of the complete measurement point fulfills international regulations, defies rough process conditions and offers outstanding measurement qualities. Miniature transmitter for compact sensor assemblies. Head transmitter technology for the smallest spaces. 4
Protection is the prime consideration when designing field housings. Complete assembly ready to install. Perfect combination The transformation of temperature-dependent voltage or resistance values plays a fundamental role in the measurement chain. Leading edge, automated production methods and logistics concepts demonstrate the capability of Endress+Hauser, a world leader in the supply of head transmitters. The available portfolio ranges from top hat DIN rail devices to field transmitters and miniature electronics to innovative multi-channel transmitters. Modern electronics supervising the measurement chain using all the most common fieldbus systems contribute to the increased safety of the plant. The complete solution includes guaranteed compatibility with all systems on the market, high safety, minimization of inaccurate measurements deviations and simple commissioning. From the primary sensor to the measurement in the system, solutions from one supplier - temperature measurement technology from Endress+Hauser. Modern temperature switch - versatile functions with simple operation. Temperature assembly with FM XP sensor for offshore/hazardous area installation. 5
Quality and quantity Temperature is the most frequently measured parameter in process automation. This means that the many temperature devices produced must fulfill consistently high quality with the best delivery performance. Endress+Hauser offers outstanding quality that is precisely executed. It is the result of proven processes and active quality consciousness. Continuous quality awards confirm the excellent quality. For premium quality products you need highly motivated and qualified employees. The Best Places to Work award in 2006 for our production, services, marketing and sales facility in Greenwood, Indiana confirms our dedication to employees, and more importantly affirms our employees loyalty to Endress+Hauser. Specification Attention to compliance with international norms and standards is already evident at the sensor assembly specification. To this end, Endress+Hauser collaborates actively in international standardization and thus represents the interests of our customers. Modern design The most up-to-date tools for the mechanical construction calculation of the sensor assembly are used at the design stage. For example, finite elements can calculate the stability and temperature trend thereby giving an early warning of any potential weak points. Traceable production Production is ISO9000 certified. Due to the high number of sensor assemblies produced, special focus is on the traceability of the materials used and the production steps. Every single device can be traced to the serial number level. Endress+Hauser offers its customers this information as an open platform for operating supplies management on the Internet. Computer simulation showing the sensor assembly tip formation in a process.
Load test in the annealing furnace at over 1832 F (1000 C). The integrity of thermowells at high pressures is guaranteed by hydrostatic testing. Complete tests and certification Additional post-production tests confirm the excellent quality of the sensor assemblies. Endress+Hauser automatically runs numerous tests for verification of the design and the production process. The tests with detailed documentation are also offered as a service to our customers. Every sensor assembly can be thoroughly checked before delivery. Tests on sensors include: Calibration - asccuracy Resistance Insulation resistance Time response Thermal shock Dielectric strength Vibration Shock To guarantee quality of thermowells, the following tests are possible: Radiography Dye penetration Hydrostatic Helium leak Positive material identification/ chemical analysis Radiographic tests verify the precise construction of measurement inserts and the quality of the welding processes. Positive material identification (PMI) Visual quality control of internal welded seams on smooth transitions.
Explosion proof sensor assemblies True safety for hazardous area measurements Complete thought in design When it comes to safety of plant equipment and human life, make no compromises! Failures in hazardous areas are dangerous and can lead to injury and/or loss of life or property. Simply connecting a sensor to an explosion proof enclosure does not make a temperature assembly explosion proof. For true safety, the whole assembly and each component must be properly designed and rated. Documented safety FM/CSA dictates special requirements to ensure plant and personnel safety. We not only meet these specifications but also provide documentation to authenticate it. We take extra care for your safety and peace of mind. TMT 142 More safety, reliability and productivity When your production is down, your competition is catching up! To further enhance safety, reliability and plant availability we recommend the SIL 2 rated TMT162 with dual elements. TMT162 ensures constant monitoring of the measuring element and even auto switch over to backup sensor. This combination substantially reduces risk and increases plant productivity. Approved accessories Intrinsically safe barriers, transmitters and explosion proof loop powered displays complete the offering for the hazardous area measurement points. Approvals For oil and gas, hydrocarbon and petrochemical industries FM (USA), CSA (Canada) CE Mark (EMC, Low Voltage Equipment Guideline) Explosion proof approval for installation in Class 1, Div. 1 NAMUR NE 43 SIL 1 2 4 â 0 8
T13 / T53 Description Measurement probe Measurement range Process connection Connection head T13: Explosion proof certified RTD assembly in thermowell with spring loaded insert and enclosure for process industry. T53: Explosion proof certified thermocouple assembly in threaded thermowell with spring loaded insert and enclosure for process industry. Pt100, Class A or B, single or dual, thin film or wire wound. Standard material is SS316L, special available. E, J, K, N, T and special types. 316SS or Inconel 600. Special available. Grounded or ungrounded junctions. -328 to +1112 F (-200 to +600 C) -454 to +2500 F (-270 to +1000 C) Threaded, weld in, socket weld Threaded, weld in, socket weld Description Measurement probe Measurement range Process connection Connection head T14: Explosion proof certified RTD assembly in flanged thermowell with spring loaded insert and enclosure for process industry. Transmitter optional. T54: Explosion proof certified RTD assembly with spring loaded insert and enclosure for process industry. For retrofit in existing thermowell. Pt100, Class A or B, single or dual, thin film or wire wound. Standard material is SS316L, special available. E, J, K, N, T and special types. 316SS or Inconel 600. Special available. Grounded or ungrounded junctions. -328 to +1112 F (-200 to +600 C) -454 to +2500 F (-270 to +1000 C) Flanged, half and full penetration type with standard and high pressure ratings Flanged, half and full penetration type with standard and high pressure ratings T14 / T54 T15 / T55 Description Measurement probe Measurement range Process connection Connection head T15: Explosion proof certified RTD assembly with spring loaded insert and enclosure for process industry. For retrofit in existing thermowell. T55: Explosion proof certified thermocouple assembly with spring loaded insert and enclosure for process industry. For retrofit in existing thermowell. Pt100, Class A or B, single or dual, thin film or wire wound. Standard material is SS316L, special available. E, J, K, N, T and special types. 316SS or Inconel 600. Special available. Grounded or ungrounded junctions -328 to +1112 F (-200 to +600 C) -454 to +2500 F (-270 to +1000 C) Lamination Hex nipple or Nipple union nipple Lamination Hex nipple or Nipple union nipple 9
Direct probe temperature assemblies Full range supplier T2 Endress+Hauser offers a complete family of full range ¼ diameter probes including hermetically sealed compact designs with builtin 4 to 20 ma loop powered transmitters. TMT162 Choices without compromises Our range includes single/dual element RTDs and thermocouples, with all types of connectors and enclosures (with or without head mounted transmitters). These have been built for the needs of the process industries to withstand the challenges of industrial environments. Q Calculation of the water heat quantity and water-heat differential from the input variables for flow (Q) and the temperature differential (T1 - T2) using TMT162 and flow computer RMS621 T1 Accessories Our range of components include power supplies, barriers, temperature displays and recorders. This allows you to design and purchase a complete measurement point. Compact transmitters Reduced complexity, increased reliability The newest generation of compact transmitters TSM470G offers a unique loop powered device to reduce installation cost and improve measurement speed and accuracy. RIA250 RSG30 A four-wire fast response Pt100 RTD is combined with a self contained electronic transmitter as one complete part to give a unique, reliable and compact measurement point. Just run the loop from your PLC straight to the quick disconnect plug. Applications We serve a wide range of industries and applications in both processes and labs such as: HVAC systems and heat exchangers Ovens and heat testing equipment Industrial and commercial chillers Freezers and heat treatment processes Machine and bearing temperature monitoring 10
TH11/TH51 Description Measurement probe Measurement range Process connection Enclosure TH11: General purpose RTD assembly with enclosure for process and laboratory application. TH51: General purpose MgO insulated thermocouple assembly with enclosure for process and laboratory application. Pt100, Class A or B, thin film or wire wound. Standard material is SS316L, special available. E, J, K, N, T and special types. 316SS or Inconel 600. Special available. Grounded or ungrounded junctions -328 to +1112 F (-200 to +600 C) -454 to +2500 F (-270 to +1000 C) Threaded, compression fitting one time or readjustable Threaded, compression fitting one time or readjustable TH56 TH12 TH52 Description Measurement probe Measurement range Process connection Enclosure TH12: General purpose RTD assembly with cable TH52: General purpose MgO insulated thermocouple assembly with cable TH56: General purpose MgO insulated thermocouple assembly with plug. Pt100, Class A or B, thin film or wire wound. Standard material is SS316L, special materials and others available. E, J, K, N, T and special types. 316SS or Inconel 600. Special available. Grounded or ungrounded junctions E, J, K, N, T and special types. 316SS or Inconel 600. Special available. Grounded or ungrounded junctions -328 to +1112 F (-200 to +600 C) -454 to +2500 F (-270 to +1000 C) -454 to +2500 F (-270 to +1000 C) Compression fitting one time or re-adjustable Compression fitting one time or adjustable Compression fitting one time or adjustable None, connection cable with standard, mini, or high temperature terminal plug or flying leads None, connection cable with standard, mini, or high temperature terminal plug or flying leads None, standard, mini, or high temperature terminal plug or flying leads TSM470G Description Measurement probe Measurement range Process connection Enclosure TSM470G: Compact RTD fully sealed assembly with built-in transmitter. Loop powered, 4-20mA output. PC programmable. 4-wire Pt100, class A sensor, 316SS -60 to +320 F (-51 to +160 C) Threaded Hermetically sealed stainless steel compact enclosure with built in transmitter. M12 connector. 11
Industrial RTD and thermocouple assemblies Spring loaded assemblies with or without thermowells Your process need is our guideline Endress+Hauser offers spring loaded assemblies carefully designed to fit industrial process applications. Our easy to use product structure allows you to quickly select the right, complete assembly. Best in class sensors We offer both RTD and thermocouples with single and dual elements. See the adjacent page for the available options. High quality transmitters Transmitters eliminate many errors in the measurement, reduce costs and improve overall measurement quality. Smart transmitters even offer advanced diagnostics such as corrosion detection and drift alarm. Our transmitters are produced in-house to the highest quality standards in the industry. Completely matched assemblies, more accuracy for your money! The transmitter-sensor matching drastically reduces the error in a measurement. Sensing elements are never identical and thus accuracy can be enhanced by exactly matching the sensor curve to the transmitter. This is useful for processes where accuracy in temperature measurement is critical to final product quality. Tested thermowells, made to high standards Endress+Hauser supplied thermowells are designed and made to the highest quality and safety standards from solid bar stock. Process connections available are: Flanged Welded Threaded Standard material of construction is 316 and for corrosive environments, special materials such as Titanium, Hastelloy C, Inconel 600, Monel as well as Protective sleeves such as Tantalum can be supplied, and ceramics are available.* Reduce cost of installation! Making it easy and cost effective for you is one of our primary goals. When you order an assembly from us, you get it ready to install. No assembling and configuring required on site! One easy to configure part number including sensor, enclosure, transmitter (if required) thermowell (if required) Standard or special testing and calibrations Preconfigured and ranged transmitters Sensor and/or transmitter calibration Complete documentation and certification Device configuration drivers and PC configuration software 1 2 4 â 0 Hastelloy is a registered trademark of Haynes International. Inconel is a registered trademark of Special Metals Corporation. Monel is a trademark of Special Metals Corporation. 12
Industrial TH13 TH53 Description Measurement probe Measurement range Process connection Enclosure TH13: RTD assembly in thermowell with spring loaded insert and enclosure for process industry. NI / IS / GP TH53: Thermocouple assembly in thermowell with spring loaded insert and enclosure for process industry. NI / IS / GP Pt100, Class A or B, single or dual, thin film or wire wound. Standard material is SS316L, special available. E, J, K, N, T and special types. 316SS or Inconel 600. Special available. Grounded or ungrounded junctions. -328 to +1112 F (-200 to +600 C) -454 to +2500 F (-270 to +1000 C) Threaded, weld in, socket weld Threaded, weld in, socket weld TH14 TH54 Description Measurement probe Measurement range Process connection Enclosure TH14: RTD assembly in flanged thermowell with spring loaded insert and enclosure for process industry. NI / IS / GP TH54: Thermocouple assembly in flanged thermowell with spring loaded insert and enclosure for process industry. NI / IS / GP Pt100, Class A or B, single or dual, thin film or wire wound. Standard material is SS316L, special available. E, J, K, N, T and special types. 316SS or Inconel 600. Special available. Grounded or ungrounded junctions. -328 to +1112 F (-200 to +600 C) -454 to +2500 F (-270 to +1000 C) Flanged, half and full penetration type with standard and high pressure ratings Flanged, half and full penetration type with standard and high pressure ratings TH15 TH55 Description Measurement probe Measurement range Process connection Enclosure TH15: RTD asembly with spring loaded insert and enclosure for process industry. For retrofit in existing thermowell. NI / IS / GP TH55: Thermocouple assembly with spring loaded insert and enclosure for process industry. For retrofit in existing thermowell. NI / IS / GP Transmitter optional. Pt100, Class A or B, single or dual, thin film or wire wound. Standard material is SS316L, special available. E, J, K, N, T and special types. 316SS or Inconel 600. Special available. Grounded or ungrounded junctions. -328 to +1112 F (-200 to +600 C) -454 to +2500 F (-270 to +1000 C) Hex nipple or Nipple union nipple Hex nipple or Nipple union nipple 13
Temperature assemblies designed for sanitary environments TSM470 TSM470F compact transmitter Specialty sensor TR46 Easytemp compact temperature transmitters combine a four-wire Pt100 Class A RTD with the analog output of a transmitter offering an economical and technical alternative to unreliable direct wiring to the control room. TSM470P compact transmitter Beyond the instrument Endress+Hauser is a full-line supplier of solutions for sanitary process measurements. The designs meet the most stringent requirements of the food and beverage/pharma/bio-tech industries for safety and reliability. We offer the necessary process connections, materials, surface finish, etc. required for optimal safety and process integration. Surface finish In industry branches, such as food and beverage, a defined surface roughness is required to fulfill the legal requirements of hygienic applications. Using electro polishing a surface finish value Ra of 15-20 µin of the wetted surface can be achieved. Industry in focus Our instruments are designed with strict compliance to the V-model and cgmp recommendations. We have third party approvals for 3-A compliance and even offer PMO required sensor response time (TH17). Our flow through sensor (TR46) is designed for use on specialty applications in small pipe skids and processes requiring non obstructive measurement. Sanitary enclosures TA20J stainless steel enclosure for transmitter or terminal block Head transmitter stainless steel housing With or without local display Plastic Lexan window 316L SS resistant to cleaning agents and corrosions TMT162 with T17 housing 316L SS dual compartment housing with fully potted electronics Lexan window with reinforced mounting Gold plated terminals Blue backlit display Hygienic design ASME/PMO assemblies available Higher plant availability The transmitter has dual inputs and automatically switches to a backup sensor. This feature can avoid potentially expensive shutdowns due to failure of one sensor during a batch process. In combination with the TH27, you can even replace sensors without interruption to the process. Specialty enclosures made from 316L stainless steel and FDA listed polypropylene are available. The range of products and services will convince you that we are the experts you can trust for your stringent sanitary requirements. â 14
TH17 TH27 TH18 Description Measurement probe Measurement range Process connection Enclosure TH17: RTD assembly with sanitary 1 to 3 Tri-Clamp connection and enclosure for sanitary applications. Meets 3-A standards. PMO requirements optional. TH18: RTD assembly with sanitary ½ to ¾ Tri-Clamp connection and enclosure for sanitary applications. Meets ASME BPE requirements TH27: RTD assembly with thermowell; sanitary; 1 to 3 Tri-Clamp connection. 3-A or ASME BPE surface finish Pt100, Class A sensor, standard material is SS316L. Standard or reduced tip for fast response. Surface finish Ra < 32 micro-inch accordance with 3-A. Pt100, Class A sensor, standard material is SS316L. Surface finish < 20 micro-inch accordance with ASME BPE, Bio processing standard. Pt100, Class A sensor, standard material is SS316L. Surface finish Ra < 20 micro-inch accordance with ASME BPE. Bio processing standard Ra < 32 micro-inch accordance with 3-A. Tri-Clamp 1 to 3 Tri-Clamp ½ to ¾ Tri-Clamp 1 to 3 (FDA compliant) (FDA compliant) (FDA compliant) TSM470P TSM470F Description Measurement probe Measurement range Process connection Enclosure TSM470F: Compact RTD, meets 3-A standard surface finish requirements. Built-in transmitter. Loop powered, 4-20mA output. PC programmable. 4-wire Pt100, class A sensor. Surface finish Ra < 32 micro-inch (150 grit). Polished, CSA/UL -60 to +320 F (-51 to +160 C) Tri-Clamp 1 to 2 Hermetically sealed stainless steel compact enclosure with built-in transmitter. M12 connector. TSM470P: Compact RTD, meets ASME BPE, Bio processing standard surface finish requirements. Built-in transmitter. Loop powered, 4-20mA output. PC programmable. 4-wire Pt100, class A sensor. Surface finish Ra < 20 micro-inch (240 grit) electro polished. CSA/UL -60 to +320 F (-51 to +160 C) Tri clamp ½ to ¾ Hermetically sealed stainless steel compact enclosure with built-in transmitter. M12 connector. Tri-Clamp is a registered trademark of Ladish Co., Inc., Kenosha, Wisconsin 15
Transmitters: high quality, leading edge technology TMT162 Designed to perform and built to last! TMT162 is an advanced, extremely rugged transmitter with very high accuracy. It is convenient to install and highly reliable and safe in operation! Salient features: Dual compartment housing and fully potted electronics Blue backlit display (optional). Large digits, visible in the dark or in direct sunlight Bar graph and fault condition indication for ease of reading Universal input for reduced inventory Dual sensor input capability 4 to 20 ma, HART, FOUNDATION Fieldbus output options Galvanic isolation 2 kv Advanced features: SIL 2, for highest safety to your measurement point Sensor backup, avoids otherwise costly unplanned shutdowns Drift alarm, to enable a quick maintenance intervention Min./max. value log Terminal corrosion detection Differential temperature or averaging temperature functions for energy applications Multi-channel (2+4) display function with FOUNDATION Fieldbus communication option Optional, stainless steel housings for hygienic or EEx D application TMT142 A field transmitter at a competitive price: Explosion proof and intrinsically safe approvals Single compartment housing Head mounted (hockey puck) transmitters: Fully potted electronics Advanced diagnostic features DIN rail Universal models or economical RTD/TC Slim line housing option for saving space Easy installation: Operation, visualization and maintenance with PC, e.g. using Fieldcare software, AMS, PDM Full support for DTM FDT configuration HART support for handhelds Output simulation for a quick and easy check of the loop Approvals: FM and CSA (IS, NI, XP and DIP) ATEX (EEx ia, EEx na, EEx d and dust-ex) Protection and simplicity is the prime consideration when designing field housings. 16
Head transmitters Model TMT180 TMT181 TMT182 TMT184 TMT187 TMT188 Special features Low cost, accurate PC interface, universal HART interface, SIL2, universal PROFIBUS -PA, universal Low cost, fixed range, for Pt100 Low cost, fixed range, for thermocouples Measurement type Pt 100 RTD/TC/Ω/mV RTD/TC/Ω/mV RTD/TC/Ω/mV Pt 100 TC Design Communication interface - - Number of inputs 1 1 1 1 1 1 RTD input Pt50/100 Cu50/100 Pt50/100/500/1000, Ni100/500/1000 Cu50/100 TC input - B, C, D, R, S, E, J, K, L, N, T, U Ω input Pt100, Pt500, Pt1000, Ni100, Ni500, Ni1000 B, C, D, R, S, E, J, K, L, N, T, U Pt100, Pt500, Pt1000, Ni100, Ni500, Ni1000 B, C, D, R, S, E, J, K, L, N, T, U Pt100 - - B, C, D, R, S, E, J, K, L, N, T, U -- 10 to 2000 Ω 10 to 2000 Ω 10 to 2000 Ω - - mv input - -10 to 100 mv -10 to 75 mv -10 to 75 mv - - Accuracy (Pt100, -58 to +392 F/-50 to +200 C) Output 0.1 K / 0.08 % (Option) 4 to 20 ma 20 to 4 ma 0.2 K 0.2 K 0.15 K 0.2 K - 4 to 20 ma 20 to 4 ma 4 to 20 ma 20 to 4 ma Power supply (DC) 10 to 35 V 8 to 35 V 11.5 to 35 V Powered by PROFIBUS -PA PROFIBUS -PA 4 to 20 ma 4 to 20 ma 8 to 35 V 8 to 35 V Galvanic isolation 26 - Yes Yes Yes Yes Yes Rail mounted Field transmitters Model TMT121/122 TMT127/128 RIT261 TMT162 TMT142 Special features PC interface/hart interface, SIL2, universal For Pt100/for thermocouples fixed range, low cost Field display with built-in head transmitter Safe, illuminated display, 2 compartment housing, SIL 2, universal Safe, illuminated display, universal Measurement type RTD/TC/Ω/mV Pt100/TC RTD/TC/mV RTD/TC/Ω/mV RTD/TC/Ω/mV Design Communication interface - Number of inputs 1 1 1 2 1 RTD input Pt100/500/1000 Ni100/500/1000 TC input B, E, J, K, N, R, S, T, C, D, L, U Ω input 10 to 400 Ω, 10 to 2000 Ω Pt100/500/1000 Ni100/500/1000 B, E, J, K, N, R, S, T, C, D, L, U Pt100/500/1000 Ni100/500/1000 B, C, D, E, J, K, L, N, R, S, T, U - 10 to 400 Ω, 10 to 2000 Ω Pt50/100/200/500/1000 Ni100/120/500/1000 Cu10/50/100 Pt50/100/200/500/1000 Ni100/120/500/1000 Cu50/100 B, C, D, R, S, E, J, K, L, N, T, U B, E, J, K, N, R, S, T, C, D, L, U 10 to 2000 Ω 10 to 400 Ω, 10 to 2000 Ω mv input -10 to 100 mv - -10 to 75 mv -20 to 100 mv -20 to 100 mv Accuracy (Pt100, /-50 to 200 C) Output 0.2 K 0.2 K 0.2 K 0.15 K 0.2 K ( 0.2 K) 4 to 20 ma 20 to 4 ma 4 to 20 ma 20 to 4 ma 0/4 to 20 ma 20 to 0/4 ma 4 to 20 ma 20 to 4 ma FOUNDATION Fieldbus Power supply (DC) 12 to 35 V 12 to 35 V 12,5 to 35 V (loop powered) 11 to 40 V (8.5 V without display) Galvanic isolation 26 Yes Yes Yes Yes Yes 4 to 20 ma 20 to 4 ma 11 to 40 V (8 V without display) 17
North American production and support Production close to the market To meet international requirements and regulations means to take these into account at the product design stage. We develop powerful product concepts, production concepts and logistics concepts for our customers. A competence center optimized on efficiency and quality consistently develops the central components of Endress+Hauser temperature measurement: primary sensor electronics software mechanical precision parts Support Engineering support In addition to a wide range of standard temperature sensors, process plants often require customized temperature solutions, along with technical documentation and test certification. Working closely with a customer, we can provide optimum solutions for any special measurement needs from a single device to large plants with more than 1000 measurement points. Technical support The tech support team can answer your technical questions. Our specialists offer knowledge and advice so that: The diagnosis is clear The possible need for field service can be avoided The instruments and software tools are correctly implemented Your maintenance is improved A dedicated phone line and a system that records your calls ensures reliability, traceability and efficiency. On-line support Help is never more than a few clicks away. On-line support provides the following support services: Order status Shipment tracking Product selection Help from our technical support team Start-up assistance Return authorizations for factory repair To access these services, simply visit: www.us.endress.com/us_assistance Factory repair At our production facilities, we offer technical checks, preventative maintenance and repair followed by functional tests and calibration in our accredited laboratories. Many schemes are possible (with fixed prices known in advance) which also help you to save time on administration. We also offer Expedited Repair and Calibration services that provide a quicker turnaround. 18
Services All around service throughout the plant life cycle A full service portfolio Endress+Hauser offers a broad range of services focused on industrial measurement and process automation. From highly specific tasks like startup or calibration to full maintenance packages like our comprehensive Instrument Management Solutions (IMS), our Service Support is well structured to supply whatever is required. FieldCare: One tool all devices FieldCare is Endress+Hauser s FDT based Plant Asset Management Tool. It can configure all intelligent field devices in your plant and supports you in managing them. By using status information, it also provides a simple but effective means of checking their health. Maintenance contracts An evolving range of maintenance contracts with inclusive guarantees enable Endress+Hauser to consistently provide you with the appropriate level of support, offering you total peace of mind and better control of operational costs. Within the scope of our contracts, we can cover a wide range of activities from simple checkup to calibration of quality critical equipment. Field Service Our team of factory trained technicians are available for situations of breakdown and on-site repair. At their disposal are specialized tools that help them provide fast and efficient diagnosis and repair. W@M: Managing and using information FieldCare is a key component of W@M (Web-enabled Asset Management), a program suite offering service and support throughout the life cycle. It connects to various Endress+Hauser databases via W@M and offers other Instrument Management programs as plug-ins, for example: Common Equipment Record (CER) allows all manufacturer device data to be called up by entering the serial number Spare Part Finder (SPF) allows you to identify and order spare parts on-line Installed Base Analyst (IBA) provides a complete record of all the devices in your plant together with a risk analysis and other important maintenance documents ReadWin 2000 Quick PC based programming tool free of charge. 19
Endress+Hauser s product portfolio Level Pressure Flow Capacitance (RF) Conductive Mechanical Vibration Ultrasonic Radar Guided radar (TDR) Hydrostatic Gauge/absolute Differential pressure Hydrostatic Electromagnetic Vortex shedding Coriolis mass flow Ultrasonic Open channel D/P flow Temperature Liquid Analysis Recorders Temperature transmitters RTDs/thermocouples Sensors Conductivity ph/orp Chlorine Dissolved oxygen Turbidity Chemical analyzers Nitrate/organic sensors Sludge level Paperless recorders Visual data managers Safety data managers Components Service Displays Active barriers Process transmitters Power supplies Start-up Training Calibration Maintenance Contracts Instrument Management Solutions www.us.endress.com/e-direct Shop on-line for low-cost instruments, devices and components USA Canada Mexico International 01.07/SCUSA Endress+Hauser, Inc. 2350 Endress Place Greenwood, IN 46143 Tel: 317-535-7138 Sales: 888-ENDRESS Service: 800-642-8737 Fax: 317-535-8498 inquiry@us.endress.com www.us.endress.com Endress+Hauser Canada 1075 Sutton Drive Burlington, ON L7L 5Z8 Tel: 905-681-9292 800-668-3199 Fax: 905-681-9444 www.ca.endress.com Endress + Hauser México, S.A. de C.V. Av. Gustavo Baz No. 43 Fracc. Bosques de Echegaray Naucalpan de Juárez, C.P. 53310, Estado de México México Phone: (52) 55-5371-1110 Fax: (52) 55-5371-1128 E-mail: eh.mexico@mx.endress.com For international locations visit: www.endress.com/worldwide FA 006T/24/ae/01.07 US/INDD CS