name 1A Fluvaquents-Udifluvents complex, 0 to 3 5.3 45, frequently flooded 2A Geneseo silty clay loam, 0 to 3 19.7 90 3A Hemlock silty clay loam, 0 to 3 25.3 90 4A Naples Creek silty clay loam, 0 to 3 34.0 90 5A Wayland soils complex, 0 to 3, 25.5 60 frequently flooded 12D Rockrift channery silt loam, 15 to 25 19.2 85 13F Rock outcrop-arnot complex, 25 to 70 55 14D Cadosia channery silt loam, 15 to 25 11.2 85 15A Guyanoga channery silt loam, fan, 0 to 3 26.2 90 15B Guyanoga channery silt loam, fan, 3 to 8 26.2 90 16A Almond channery silt loam, 0 to 3 25.5 80 16B Almond channery silt loam, 3 to 8 25.5 80 16C Almond channery silt loam, 8 to 15 25.5 80 18A Homer fine sandy loam, 0 to 3 12.5 90 19A Fine-loamy, mixed, active, mesic, Typic Argiaquolls, 29.8 80 0 to 3 20A Atherton and Fine-loamy, mixed, active, mesic, Typic 29.8 40 Argiaquolls, 0 to 3 24A Howard gravelly loam, 0 to 3 14.2 80 24B Howard gravelly loam, 3 to 8 14.2 80 24C Howard gravelly loam, 8 to 15 14.2 80 24D Howard soils, 15 to 25 14.2 65 25A Chenango gravelly loam, 0 to 3 11.4 90 25B Chenango gravelly loam, 3 to 8 11.4 90 25C Chenango gravelly loam, 8 to 15 11.4 90 25D Chenango gravelly loam, 15 to 25 12.0 90 25E Chenango gravelly loam, 25 to 35 12.0 90 26B Chenango channery loam, fan, 3 to 8 12.8 85 27B Castile gravelly silt loam, 3 to 8 12.5 85 31A Collamer silt loam, 0 to 3 16.3 85 31B Collamer silt loam, 3 to 8 18.7 85 31C Collamer silt loam, 8 to 15 18.7 85 31D Collamer silt loam, 15 to 25 18.7 90 32A Dunkirk fine sandy loam, 0 to 3 20.2 90 32B Dunkirk fine sandy loam, 3 to 8 20.2 90 33A Dunkirk silt loam, 0 to 3 24.2 90 33B Dunkirk silt loam, 3 to 8 24.2 90 33C Dunkirk silt loam, 8 to 15 24.2 90 33D Dunkirk silt loam, 15 to 25 24.2 90 33E Dunkirk silt loam, 25 to 35 24.2 90 34A Lakemont silty clay loam, 0 to 3 46.3 85 35A Odessa silt loam, 0 to 3 45.0 85 35B Odessa silty clay loam, 3 to 8 46.5 85 Page 1 of 7
name 36A Schoharie silty clay loam, 0 to 3 45.4 90 36B Schoharie silty clay loam, 3 to 8 45.4 90 36C Schoharie silty clay loam, 8 to 15 45.4 90 36D Schoharie silty clay loam, 15 to 25 45.4 90 36E Schoharie silty clay loam, 25 to 45 45.4 90 37A Schoharie silt loam, 0 to 3 43.9 90 37B Schoharie silt loam, 3 to 8 43.9 90 38A Niagara silt loam, 0 to 3 28.3 85 38B Niagara silt loam, 3 to 8 28.3 85 39A Rhinebeck silty clay loam, 0 to 3 43.4 90 41A Aeric Epiaquepts, 0 to 3 25.0 50 43A Canandaigua silt loam, 0 to 3 27.0 90 44A Canandaigua mucky silt loam, 0 to 3 28.0 90 45A Fonda mucky silt loam, 0 to 3 46.2 95 46A Galen fine sandy loam, 0 to 3 7.1 90 46B Galen fine sandy loam, 3 to 8 7.1 90 48A Arkport fine sandy loam, 0 to 3 7.5 95 48B Arkport fine sandy loam, 3 to 8 7.5 95 48C Arkport fine sandy loam, 8 to 15 7.5 95 48D Arkport fine sandy loam, 15 to 25 7.5 90 49B Arkport loamy fine sand, 3 to 8 6.0 95 49D Arkport loamy fine sand, 15 to 25 5.7 95 49E Arkport loamy fine sand, 25 to 35 5.7 90 49F Arkport loamy fine sand, 35 to 55 5.7 90 50B Dunkirk-Arkport complex, 3 to 8 24.2 50 50C Dunkirk-Arkport complex, 8 to 15 24.2 60 50D Dunkirk-Arkport complex, 15 to 25 24.2 60 53A Lamson fine sandy loam, 0 to 3 3.5 90 54A Lamson mucky fine sandy loam, 0 to 3 3.3 90 56A Elnora loamy fine sand, 0 to 3 4.7 90 58B Colonie loamy fine sand, 3 to 8 5.3 95 58C Colonie loamy fine sand, 8 to 15 5.3 95 62B Mardin channery silt loam, 3 to 8 16.4 85 62C Mardin channery silt loam, 8 to 15 16.4 88 62D Mardin channery silt loam, 15 to 25 16.4 85 62E Mardin channery silt loam, 25 to 35 16.3 80 63B Langford channery silt loam, 3 to 8 19.0 90 63C Langford channery silt loam, 8 to 15 pecent 19.0 90 63D Langford channery silt loam, 15 to 25 19.0 90 64B Langford-Erie channery silt loams, 3 to 8 19.0 55 66A Lyons soils, 0 to 3 18.9 75 68A Volusia channery silt loam, 0 to 3 20.4 90 68B Volusia channery silt loam, 3 to 8 20.4 90 Page 2 of 7
name 68C Volusia channery silt loam, 8 to 15 20.4 90 68D Volusia channery silt loam, 15 to 25 20.4 90 69A Erie channery silt loam, 0 to 3 20.3 95 69B Erie channery silt loam, 3 to 8 20.3 95 69C Erie channery silt loam, 8 to 15 20.3 95 71A Darien silt loam, 0 to 3 28.8 95 71B Darien silt loam, 3 to 8 28.8 95 71C Darien silt loam, 8 to 15 28.8 95 72A Darien-Ilion silt loams, 0 to 3 28.8 68 72B Darien-Ilion silt loams, 3 to 8 28.8 68 73B Gretor silt loam, 3 to 8 23.1 95 73C Gretor silt loam, 8 to 15 23.1 95 73D Gretor channery silt loam, 15 to 25 23.1 90 76B Orpark silt loam, 3 to 8 25.5 95 76C Orpark silt loam, 8 to 15 25.5 95 76D Orpark channery silt loam, 15 to 25 25.5 90 77A Chippewa silt loam, 0 to 3 21.1 85 77B Chippewa silt loam, 3 to 8 21.1 85 82B Manlius channery silt loam, 3 to 8 24.2 95 82C Manlius channery silt loam, 8 to 15 24.2 95 82D Manlius channery silt loam, 15 to 25 24.2 95 91A Palms muck, 0 to 3 16.6 55 92A Carlisle muck, 0 to 3 10.0 45 93A Edwards muck, 0 to 3 12.9 50 94A Martisco muck, 0 to 3 17.6 55 95A Saprists, 0 to 3, inundated 14.0 85 101A Honeoye loam, 0 to 3 18.3 85 101B Honeoye loam, 3 to 8 18.3 85 101C Honeoye loam, 8 to 15 18.5 85 101D Honeoye loam, 15 to 25 18.3 85 101E Honeoye loam, 25 to 35 18.3 85 104A Honeoye loam, 0 to 3, lower clay 17.9 85 surface 104B Honeoye loam, 3 to 8, lower clay 17.9 85 surface 104C Honeoye loam, 8 to 15, lower clay 17.9 85 surface 106B Danley-Lansing complex, 3 to 8 28.1 50 107B Conesus-Lansing complex, 3 to 8 18.5 50 108C Lansing loam, 8 to 15 18.8 85 108D Lansing loam, 15 to 25 18.8 85 108E Lansing loam, 25 to 35 18.8 85 112B Ontario fine sandy loam, 3 to 8 23.3 90 112C Ontario fine sandy loam, 8 to 15 23.3 95 112D Ontario fine sandy loam, 15 to 25 23.3 95 112E Ontario fine sandy loam, 25 to 35 23.3 93 Page 3 of 7
name 114B Ontario gravelly loam, 3 to 8 23.3 98 114C Ontario gravelly loam, 8 to 15 23.3 95 114D Ontario gravelly loam, 15 to 25 23.3 95 116B Ontario loam, 3 to 8 23.3 90 116C Ontario loam, 8 to 15 23.3 95 116D Ontario loam, 15 to 25 23.3 95 118F Ontario, Honeoye, and Lansing soils, 35 to 55 23.3 40 120E Palmyra and Howard soils, 25 to 45 12.3 55 122A Palmyra cobbly loam, 0 to 3 11.1 95 122B Palmyra cobbly loam, 3 to 8 11.1 95 124A Palmyra fine sandy loam, 0 to 3 11.3 90 124B Palmyra fine sandy loam, 3 to 8 11.3 90 126A Palmyra gravelly loam, 0 to 3 12.3 95 126B Palmyra gravelly loam, 3 to 8 12.3 95 126C Palmyra gravelly loam, 8 to 15 12.3 90 126D Palmyra gravelly loam, 15 to 25 12.3 90 128A Palmyra gravelly sandy loam, 0 to 3 8.4 90 128B Palmyra gravelly sandy loam, 3 to 8 8.4 90 128C Palmyra gravelly sandy loam, 8 to 15 8.4 90 130A Farmington loam, 0 to 3 16.6 90 130B Farmington loam, 3 to 8 16.6 90 132A Galoo loam, 0 to 3, rocky 17.7 95 132B Galoo loam, 3 to 8, rocky 17.7 95 134A Camillus silt loam, 0 to 3 21.3 95 134B Camillus silt loam, 3 to 8 21.3 95 151C Willdin-Norchip complex, 3 to 15 16.4 60 152B Valois gravelly loam, 3 to 8 17.2 85 152C Valois gravelly loam, 8 to 15 17.2 85 152D Valois gravelly loam, 15 to 25 17.2 85 152E Valois gravelly loam, 25 to 35 17.2 85 153B Valois gravelly loam, cool, 3 to 8 18.8 85 153C Valois gravelly loam, cool, 8 to 15 18.8 85 153D Valois gravelly loam, cool, 15 to 25 18.8 85 153E Valois gravelly loam, cool, 25 to 35 18.8 85 162B Willdin channery silt loam, 3 to 8 16.3 85 162C Willdin channery silt loam, 8 to 15 16.3 85 162D Willdin channery silt loam, 15 to 25 16.3 80 168A Ontusia channery silt loam, 0 to 3 20.4 88 168B Ontusia channery silt loam, 3 to 8 20.4 90 168C Ontusia channery silt loam, 8 to 15 20.4 90 168D Ontusia channery silt loam, 15 to 25 20.4 90 171C Lordstown-Manlius-Towerville complex, 8 to 15 171D Lordstown-Manlius-Towerville complex, 15 to 25, very stony 15.3 40 15.3 40 Page 4 of 7
name 171E Lordstown-Manlius-Towerville complex, 25 to 35 15.3 40, extremely stony 171F Lordstown-Manlius-Towerville complex, 35 to 80 12.3 40, extremely stony 177A Norchip silt loam, 0 to 3 21.1 85 177B Norchip silt loam, 3 to 8 21.1 85 181B Mongaup-Ischua complex, 3 to 8 17.5 45 181C Mongaup-Ischua complex, 8 to 15 17.5 45 181D Mongaup-Ischua complex, 15 to 25, 17.5 45 very stony 181E Mongaup-Ischua complex, 25 to 35, 17.5 45 extremely stony 182B Mongaup channery loam, 3 to 8 15.4 75 182C Mongaup channery loam, 8 to 15 15.4 75 201A Lima loam, 0 to 3 18.0 85 201B Lima loam, 3 to 8 18.0 85 201C Lima loam, 8 to 15 18.0 85 204A Lima loam, 0 to 3, lower clay surface 17.6 85 204B Lima loam, 3 to 8, lower clay surface 17.6 85 210A Phelps gravelly silt loam, 0 to 3 14.7 85 210B Phelps gravelly silt loam, 3 to 8 14.7 85 212A Nuhi silt loam, 0 to 3 24.9 85 240B Aurora-Angola silt loams, 3 to 8 21.1 60 240C Aurora-Angola silt loams, 8 to 15 21.1 60 240D Aurora-Angola silt loams, 15 to 25 21.1 60 241B Aurora silt loam, 3 to 8 21.1 85 241C Aurora silt loam, 8 to 15 21.1 85 241D Aurora silt loam, 15 to 25 21.1 85 255B Cazenovia silt loam, 3 to 8 29.5 85 255C Cazenovia silt loam, 8 to 15 29.5 85 255D Cazenovia silt loam, 15 to 25 29.5 85 260B Cayuga silt loam, 3 to 8 36.9 85 260C Cayuga silt loam, 8 to 15 36.9 85 260D Cayuga silt loam, 15 to 25 36.9 85 304A Kendaia loam, 0 to 3 17.8 85 304B Kendaia loam, 3 to 8 17.8 85 342A Angola silt loam, 0 to 3 27.7 90 356A Ovid silt loam, 0 to 3 27.4 85 356B Ovid silt loam, 3 to 8 27.4 85 357B Ovid silty clay loam, 3 to 8 30.4 85 357C Ovid silty clay loam, 8 to 15 30.4 85 400A Udorthents, loamy, 0 to 3 16.0 80 401D Udorthents, refuse substratum. 0 to 25 17.0 90 PG Pits, gravel and sand 75 PQ Pits, quarry 80 Page 5 of 7
Map name W Water Page 6 of 7
Options Attribute Name: Clay as a soil separate consists of mineral soil particles that are less than 0.002 millimeter in diameter. The estimated clay content of each soil layer is given as a age, by weight, of the soil material that is less than 2 millimeters in diameter. The amount and kind of clay affect the fertility and physical condition of the soil and the ability of the soil to adsorb cations and to retain moisture. They influence shrink-swell potential, saturated hydraulic conductivity (Ksat), plasticity, the ease of soil dispersion, and other soil properties. The amount and kind of clay in a soil also affect tillage and earth-moving operations. Most of the material is in one of three groups of clay minerals or a mixture of these clay minerals. The groups are kaolinite, smectite, and hydrous mica, the best known member of which is illite. For each soil layer, this attribute is actually recorded as three separate values in the database. A low value and a high value indicate the range of this attribute for the soil component. A "representative" value indicates the expected value of this attribute for the component. For this soil property, only the representative value is used. Aggregation is the process by which a set of component attribute values is reduced to a single value to represent the map unit as a whole. A map unit is typically composed of one or more "components". A component is either some type of soil or some nonsoil entity, e.g., rock outcrop. The components in the map unit name represent the major soils within a map unit delineation. Minor components make up the balance of the map unit. Great differences in soil properties can occur between map unit components and within short distances. Minor components may be very different from the major components. Such differences could significantly affect use and management of the map unit. Minor components may or may not be documented in the database. The results of aggregation do not reflect the presence or absence of limitations of the components which are not listed in the database. An on-site investigation is required to identify the location of individual map unit components. For each of a map unit's components, a corresponding composition is recorded. A composition of 60 indicates that the corresponding component typically makes up approximately 60% of the map unit. Percent composition is a critical factor in some, but not all, aggregation methods. For the attribute being aggregated, the first step of the aggregation process is to derive one attribute value for each of a map unit's components. From this set of component attributes, the next step of the aggregation process derives a single value that represents the map unit as a whole. Once a single value for each map unit is derived, a thematic map for soil map units can be generated. Aggregation must be done because, on any soil map, map units are delineated but components are not. The aggregation method "Dominant Component" returns the attribute value associated with the component with the highest composition in the map unit. If more than one component shares the highest composition, the corresponding "tie-break" rule determines which value should be returned. The "tie-break" rule indicates whether the lower or higher attribute value should be returned in the case of a composition tie. The result returned by this aggregation method may or may not represent the dominant condition throughout the map unit. The tie-break rule indicates which value should be selected from a set of multiple candidate values, or which value should be selected in the event of a composition tie. This option indicates that a null value for a component should be converted to zero before aggregation occurs. This will be done only if a map unit has at least one component where this value is not null. Page 7 of 7