CATALOGUE-PRICE LIST 10-2015
TABLE OF CONTENTS 1 - THERMAL SOLAR PAGE 4 - HEAT PUMPS PAGE DTH series direct-flow vacuum collector 8 PTH - air-water heat pump 68 RTH series heat-pipe vacuum collector 9 THERMODYN: solar-assisted heat pump 70 FTH 2.0 - FTH 2.5 flat forced-circulation solar collectors 10 AIR&SUN BOX 72 FTH 2.5 H flat forced-circulation solar collectors 12 PAW - ECO: monobloc air-water heat pump 73 FTH 2.0 ECO flat forced-circulation solar collectors 13 PAW - 2 ECO: monobloc air-water heat pump 74 FTH MEGAflat forced-circulation solar collectors 15 HYDRA: inverter heat pump 75 Hybrid - thermal-photovoltaic collector 16 PAW: monobloc air-water heat pump 77 Installation and connection accessories for collectors 18 HYDROBOX 78 PAW - S: split air-water heat pump 79 2 - BOILERS AND STORAGE TANKS PAGE CALDENSA: direct condensation heat pump 80 DHW Boilers 22 PWW: indoor electric heat pumps 84 DHW boilers - 2 pre-assembled coils 25 POSEIDON 85 DHW generators with heat exchanger 26 SHC - zeolite absorber for low temperatures 86 Horizontal double-wall dhw boilers 27 Common heat pump accessories 88 DHW boilers - large volume 28 DHW boilers - removable coil 29 5 - SYSTEMS PAGE Multienergy thermal inertial storage 30 SKYPOWER: vacuum DHW solar system 92 Boilers for heat pumps 32 PEGASUS: flat solar system 94 COMBI thermal inertial storage 33 ACQUA RTH - BASIC: DHW vacuum systems 96 TANK IN TANK thermal inertial storage 34 ACQUA DTH - PREMIUM: DHW vacuum systems 97 Puffer and puffer thermal inertial storage 35 ACQUA FTH - BASIC: DHW flat systems 98 Underground boilers 38 ACQUA FTH - PREMIUM: Pre-assembled DHW systems 99 ACQUEL 300: thermal solar system + heat pump 100 3 - HEATING SYSTEM ACCESSORIES PAGE COMBI - RTH SYSTEMS for heating integration 101 Corrugated and stripwound stainless-steel tubes 42 SHC: Solar cooling & heating systems 103 Solar stations 44 Pre-configured thermal solar fields for exchange with 105 Heat exchanger modules 47 DRAIN BACK solar stations 50 POWER-UP AND TESTING 107 Instantaneous DHW production modules 52 Control systems 55 GENERAL CONDITIONS OF SALE 108 Heat exchangers for swimming pools 56 Inspectable plate heat exchangers 57 Antifreeze liquids and cleaning fluids 59 Mixing/diverter valves 60 Expansion vessels 61 Summer air-based dissipators for solar installations 63 CTH - ventilated dissipators for industrial installations 64 3
4
The company Thermics is a company founded on years of experience in the industrial heat exchange sector and that has extended its experience to the solar energy sector. Thermics promotes the efficient and competitive use of solar energy: a clean and inexhaustible source of energy. Thermic s objective is to design and produce innovative solar technologies that are constantly evolving. The internal Quality Management system and constant attention to the smallest details enable the company to offer its customers high-performance products. The Thermics solar systems Over the years, Thermics has developed a highly efficient series of solar thermal systems that are suitable for a wide range of uses: from the production of domestic hot water, using natural circulation systems, to the production of heat and air-conditioning for industrial or commercial users using forced circulation systems. The strength of the collectors lies in the research dedicated to achieving maximum possible efficiency and their sturdy construction. Every product has been designed, tested and improved over time to guarantee maximum customer satisfaction. 5
1 THERMAL SOLAR 6
7 1
FORCED-CIRCULATION SOLAR COLLECTORS DTH - CPC DTH SERIES DIRECT-FLOW VACUUM COLLECTOR 1 DTH-CPC Thermics Direct Flow 10-tube solar collector, with vacuum tubes and direct coaxial circulation. Available in a single size to allow you to easily perform modular installations, it can be used in both small-scale residential and large-scale industrial applications. [W] POWER CURVE MODEL Flow type Tube specifications Number of tubes 10 Tube connection Gross dimensions (H W T) Heat exchanger 10 DTH-CPC Direct coaxial flow Vacuum, hail-proof, with next-generation selective coating in three layers; thickness 2.2 mm; length 1,800 mm; external diam. 58 mm Parallel Gross collector area 2.22 m 2 Aperture area 1.96 m 2 Weight Fluid capacity in the collector Hydraulic connection Nominal flow rate Maximum working pressure 1965 x 1132 x 140 mm In coaxial copper, 14/8 mm 49 kg 2.35 Lt F22 screw-on 120 l/h 10 bar Efficiency η0 0.654 a1 1.41 a2 0.0033 Mounting Warranty Certifications Pitched/flat roof, vertical on wall, horizontal on wall 10 years 12975, Solar Keymark, Impact test 8TCO00018 DTH-CPC 10-tube direct-flow collector 897.86 8
RTH - CPC RTH SERIES HEAT-PIPE VACUUM COLLECTOR Thermics D-COND RTH series vacuum tube solar collector: Direct Condensation heat-pipe collection system with enlarged capillaries, cylindrical condensation chamber, very high-efficiency Cpc BLUE parabolic collector. 1 [W] POWER CURVE MODEL Flow type Tube specifications Number of tubes 10 Tube connection Gross dimensions (H W T) Heat exchanger 10 DTH-CPC Heatpipe Vacuum, hail-proof, with next-generation selective coating in three layers; thickness 2.2 mm; length 1,800 mm; external diam. 58 mm Series Gross collector area 2.20 m 2 Aperture area 1.90 m 2 Weight Fluid capacity in the collector Hydraulic connection Nominal flow rate Maximum working pressure 1965 x 1132 x 140 mm In copper with dry connection 44 kg 0.9 Lt F22 screw-on 120 l/h 10 bar Efficiency η0 0.615 a1 1.03 a2 0.0077 Mounting Warranty Certifications Pitched/flat roof 5 years 12975, Solar Keymark, Impact test 8TCO00008 RTH-CPC 10-tube direct-flow collector 775.00 9
FLAT FORCED-CIRCULATION SOLAR COLLECTORS FTH 2.0 1 FTH 2.0 FLAT COLLECTOR Thermics FTH series flat solar collector. Collection system with highly selective aluminium sheeting laser welded to a copper heat exchanger with harp or meander layout. 1150 mm 95 mm 1870 mm FTH 2.0 Dry weight 34 kg Gross surface area 2.15 m 2 Aperture area 2.00 m 2 Efficiency η0 0.781 a1 3.7 a2 0.0141 Max. working pressure 10 bar Installation angle 20-90 Absorber material Selective aluminium with copper tubing Absorber type Simple harp layout Nominal flow rate 100 l/h (low flow 50 l/h) Liquid content 1.13 Lt Insulation 50 mm high-density mineral wool Chassis Innovative, patented design for quick installation Selective system ETA PLUS very high efficiency Flat glass Structured, high strength Connections 4 x Cu22 side Mounting On façade / pitched roof / flat roof / integrated Warranty 10 years Ventilation Patented anticondensing system Certification Solar keymark 8TCO00210 FTH 2.0 Flat Collector 589.60 10
FTH 2.5 FTH 2.5 FLAT COLLECTOR Thermics FTH series flat solar collector. Collection system with highly selective aluminium sheeting laser welded to a copper heat exchanger with harp or meander layout. 1 1150 mm 95 mm 2160 mm FTH 2.5 Dry weight 39 kg Gross surface area 2.51 m 2 Aperture area 2.30 m 2 Efficiency η0 0.781 a1 3.7 a2 0.0141 Max. working pressure 10 bar Installation angle 20-90 Absorber material Selective aluminium with copper tubing Absorber type Simple harp layout Nominal flow rate 100 l/h (low flow 50 l/h) Liquid content 1.30 Lt Insulation 50 mm high-density mineral wool Chassis Innovative, patented design for quick installation Selective system ETA PLUS very high efficiency Flat glass Structured, high strength Connections 4 x Cu22 side Mounting On façade / pitched roof / flat roof / integrated Warranty 10 years Ventilation Patented anticondensing system Certification Solar keymark 8TCO00220 FTH 2.5 Flat Collector 643.20 11
FLAT FORCED-CIRCULATION SOLAR COLLECTORS FTH 2.5 DH - DOUBLE HARP WITH UPPER CONNECTIONS 1 FTH 2.5 DH FLAT COLLECTOR Thermics FTH DH series flat solar collector. Collection system with highly selective aluminium sheeting laser welded to a copper heat exchanger with double harp. FTH 2.5 DH Dry weight 39 kg Gross surface area 2.51 m² Aperture area 2.3 m² Efficiency η0 83.9 % (referred to the aperture area) a1 3.71 W / (m² x K) a2 0.0155 W / (m² x K) Max. working pressure 10 bar Installation angle 20 90 Absorber material Absorber with aluminium sheet and copper tubes Absorber type Absorber with 12 harp tubes ø 8 mm and 2 collector tubes ø 18 mm Nominal flow rate 100 l/h (low flow: 50 l/h) Liquid content 1.3 Lt Insulation 50-mm mineral wool Frame Powder coated aluminium frame Selective system Highly selective on aluminium base Flat glass Tempered solar glass with low iron content (ESG) Connections 2 fittings on one side, ½ external thread, flat gasket Mounting On pitched roof, built-in, on flat roof, on façade, on ground Warranty 10 years for functionality and weather resistance Ventilation Patented anticondensing system Certification Solar keymark 8TCO00230 FTH 2.5 DH Flat collector 643.20 12
FTH 2.5 H-2V - SINGLE HARP FOR HORIZONTAL-MOUNTING FTH 2.5 H-2V FLAT COLLECTOR Thermics FTH H-2V series flat solar collector. Collection system with highly selective aluminium sheeting laser welded to a copper heat exchanger with single harp. 1 1150 mm 95 mm FTH 2.5 H-2V 2160 mm Dry weight 39 kg Gross surface area 2.51 m² Aperture area 2.3 m² Efficiency η0 78.1 % (referred to the aperture area) a1 3.70 W / (m² x K) a2 0.0141 W / (m² x K) Max. working pressure 10 bar Installation angle 20 90 Absorber material Absorber with aluminium sheet and copper tubes Absorber type Absorber with 10 harp tubes ø 8 mm and 2 collector tubes ø 18 mm Nominal flow rate 100 l/h (low flow: 50 l/h) Liquid content 1.3 Lt Insulation 50-mm mineral wool Frame Powder coated aluminium frame Selective system Highly selective on aluminium base (eta plus_al) Flat glass Tempered solar glass with low iron content (ESG) Connections Series connection with side-by-side collectors Installation On pitched roof, built-in, on flat roof, on façade, on ground Warranty 10 years for functionality and weather resistance Ventilation Patented anticondensing system Certification Solar keymark 8TCO00235 FTH 2.5 H-2V Flat collector 643.20 13
FLAT FORCED-CIRCULATION SOLAR COLLECTORS FTH 2.0 - ECO 1 FTH 2.0 ECO FLAT COLLECTOR Thermics FTH series flat solar collector. Collection system with selective aluminium sheeting laser welded to a copper heat exchanger with meander layout. 1058 mm 75 mm 1908 mm FTH 2.0 ECO Dry weight 29 kg Gross surface area 2.01 m 2 Aperture area 1.85 m 2 Efficiency η0 0.748 a1 3.93 a2 0.0148 Max. working pressure 10 bar Installation angle 20-90 Absorber material Selective aluminium with copper tubing Absorber type Meander layout Nominal flow rate 120 l/h (low flow 50 l/h) Liquid content 1.40 Lt Insulation 30 mm high-density mineral wool Chassis Quick installation Selective system Aluminium with selective coating Flat glass Structured, high strength Connections 4 x Cu18 side Mounting On façade / pitched roof / flat roof / integrated Warranty 10 years Ventilation Patented anticondensing system Certification Solar keymark 8TCO00240 FTH 2.0 ECO Flat collector 467.50 14
FTH 12.5 MEGA FTH MEGA - FLAT COLLECTOR Large surface area monobloc thermal solar collector suitable for large solar thermal installations on roofs or ground level. The plumbing and performance have been designed to optimise the thermal efficiency and reliability of the solar field under all conditions. The monobloc construction provides substantial savings in installation times and equipment, as well as in the cost of the product itself. 1 FTH 12.5 MEGA Measurements 2160 x 5750 x 111 mm Gross area 12.42 m 2 Absorber area (net) 11.7 m 2 / 11.5 m 2 Dry weight 230 kg Liquid content 14 Lt Efficiency η0 82 %, with respect to the absorber area Heat loss coefficient (a1) 3.78 W / (m² x K) Heat loss coefficient (a2) 0.0102 W / (m² x K²) Heat loss coefficient (a4) 4.19 W / (m² x K) Max. stagnation temperature 210 C Selective coating Highly selective coating on aluminium base Absorption / Emission 95% / 5% Cover Tempered solar glass with low iron content (ESG) with anti-reflective coating Glass transmission 96.5 % Impact resistance The cover passed the optional impact resistance test according to EN12975-2 Hydraulic connection Series connection with up to 16 side-by-side collectors Type of connection 2 side fittings ø 28 mm (copper, tube only) Max. working pressure 10 bar Heat insulation 60-mm Mineral wool Collector case Hard wood frame with aluminium structure Installation angle 15 75 Recommended heat transfer fluid Propylene-glycol-based antifreeze mix Warranty 10 years for functionality and weather resistance 8TCO00315 FTH 12.5 MEGA Flat collector 4,389.00 FTH MEGA mounting kit POA 15
FORCED-CIRCULATION SOLAR COLLECTORS THERMAL-PHOTOVOLTAIC HYBRID COLLECTOR 1 Thermal photovoltaic module for production of electricity, domestic hot water and heating. Removes the superfluous heat generated by the photovoltaic panel. 80% of dataplate power for 25 years 10-year product warranty CONSTRUCTION CHARACTERISTICS Module dimension Type of cells Cell dimension 156 x 156 Glass 1,663 x 998 x 45 mm Safety class A, protection class 2 Frame 60 high efficiency polycrystalline silicon cells High light transmittance prismatic tempered glass, 4 mm thickness, U1 class. Aluminium alloy EN AW-6060-T6 anodised 15 μm, thickness 4.5 cm THERMAL PARAMETERS Instantaneous absorption efficiency η0 0.650 Coefficient of linear thermal dispersion a1 14.284 W/(m 2 K) Thermal coefficient a2 0.012 W/(m 2 K 2 ) Angle of incidence, reduced optical efficiency Peak thermal power Pressure loss at nominal flow rate kθ(50 C) 94% 1040 W Maximum temperature 80 C Maximum pressure Minimum recommended flow rate Empty module weight Module fluid volume 150 mbar 3 bar 2 l/min 31 Kg 1 Lt Gross area 1.66 m 2 Aperture area 1.60 m 2 Absorption area 1.60 m 2 Tubing diameter for connection Ø 10 x 1.5 mm Reference standards EN 12975 IEC EN 61215 IEC EN 61730 ELECTRICAL PARAMETERS Peak output Pm 250 W Tolerance ±2.5 % MPP voltage Vm 30.03 V MPP current Im 8.33 A No-load voltage 37.68 Voc Short-circuit current Isc 8.81 A Max. admissible voltage 1000 VDC Module efficiency 15.06 % Maximum surface load 4500 N/m 2 Insulation resistance >100M Ω 16
1 CERTIFICATIONS Module certificates: IEC 61215 ed.ii Module certificates: CEI-EN 61730-1; CEI-EN 61730-2 Conforms to requirements of: V CONTO ENERGIA, Italian Ministerial Decree 05/07/2012, Art. 5 Sec. 2, MADE IN EU 8FWI00250 HYBRID Module - 250W el. - 1040W th. 984.90 17
INSTALLATION ACCESSORIES AND FITTINGS FOR COLLECTORS COLLECTOR INSTALLATION KIT 8TTE00050 RTH/DTH collector Fx base kit 77.09 1 8TTE00048 FTH installation base kit 81.51 8TTE00046 FTH-ECO installation base kit 79.80 8TTE00102 FTH 2.5 H-2V Fx base kit - HORIZONTAL 78.30 8TTE00103 FTH 2.5 H-2V Fx extension kit - HORIZONTAL 74.96 8TTE00054 RTH DTH FTH triangle stand kit 1 71.96 8TTE00056 2 Reinforced wind-proof steel cables kit 45.03 8TTE00060 2 Fx brackets to tiles kit 28.42 8TTE00062 2 Fx brackets to bent tiles kit 25.37 8TTE00064 2 long screws, L 300 kit 19.72 8TTE00066 2 Fx brackets for slate/shingle roofs kit 25.08 8TTE00071 2 clamps for seamed corrugated metal roofs kit 49.59 8TTE00069 Corrugated sheet kit 46.80 8TTE00080 RTH/DTH Base flashing kit 385.16 8TTE00084 FTH Base flashing kit 350.00 8TTE00082 RTH/DTH Extension flashing kit 312.93 8TTE00086 FTH Extension flashing kit 282.61 18
FITTINGS FOR COLLECTORS 8TKS00050 DTH/RTH CF fittings kit 36.75 8TKS00153 Tee fitting with probe well - FTH Mega 83.51 8TKS00052 FTH fittings kit 23.82 1 8TKS00054 FTH 2.0 ECO fittings kit 80.30 8TKR00275 Flexible fitting 22x22 20.81 8TKR00273 Flexible fitting 18x18 - FTH 2.0 ECO 17.92 8TKR00277 Flexible fitting 28x28 MEGA 74.48 8TKR00278 FTH 2.5 DH Connector kit 34.06 8TKR00279 Flexible connector for FTH 2.5 DH 15.40 19
BOILERS and STORAGE TANKS 2 2020
21 2
DHW BOILERS DHW BOILERS - WITHOUT HEAT EXCHANGERS 2 Boilers for the production of domestic hot water without coils. Main tank features: Construction material S235JR Internal vitrification as per DIN 4753 p.3 Maximum DHW working pressure: 10 bar Maximum DHW temperature 95 C External burnishing Main insulation features: For 200-500 litre models: external insulation with direct PU injection, thickness 50mm, minimum guaranteed density 40 kg/m³ For 750-1000 litre models: external insulation in removable rigid PU sections, thickness 70mm, minimum guaranteed density 40 kg/m3 For 1500-3000 litre models: 100mm soft, removable insulation, minimum guaranteed density 14 kg/ m³. Complete with pipe rosettes, black covers and plastic protective caps for connections External finish in skay RAL9006 grey Accessories: Magnesium sacrificial anode Temperature gauge MODEL 200 300 400 500 750 1.000 1500 2000 2500 3000 Effective storage capacity Diameter without insulation Diameter with insulation litres 200 300 400 500 750 1.000 1,500 2,000 2,500 3,000 mm 500 500 600 650 790 790 1.000 1,100 1,200 1,200 mm 610 610 710 760 950 950 1,200 1,300 1,400 1,400 HT: total height mm 1,265 1,710 1,690 1,780 1,870 2,120 2,285 2,550 2,680 2,980 Max DHW pressure bar 10 10 10 10 10 10 10 10 10 10 8TBO00391 Vert. DHW boiler, 0 coils 200l - H 604.03 8TBO00393 Vert. DHW boiler, 0 coils 300l - H 709.11 8TBO00395 Vert. DHW boiler, 0 coils 400l - H 866.69 8TBO00396 Vert. DHW boiler, 0 coils 500l - H 1,001.12 8TBO00397 Vert. DHW boiler, 0 coils 750l - H 1,646.67 8TBO00398 Vert. DHW boiler, 0 coils 1000l - H 1,864.67 8TBO00400 Vert. DHW boiler, 0 coils 1500l - H 3,729.31 8TBO00402 Vert. DHW boiler, 0 coils 2000l - H 4,267.70 8TBO00404 Vert. DHW boiler, 0 coils 2500l - H 5,239.41 8TBO00406 Vert. DHW boiler, 0 coils 3000l - H 6,224.29 222
DHW BOILERS - 1 FIXED HEAT EXCHANGER Boilers for the production of domestic hot water with one fixed coil. Main tank features: Construction material S235JR; Internal vitrification as per DIN 4753 Max DHW temperature 95 C Max heat-exchanger temperature 110 C External burnishing External finish in grey sky Main insulation features: For 150-500 litre models: external insulation with direct PU injection, thickness 50mm, minimum guaranteed density 40 kg/m³ For 750-1000 litre models: external insulation in removable rigid PU sections, thickness 70mm, minimum guaranteed density 40 kg/m 3 For 1500-3000 litre models 100mm soft, removable insulation, minimum guaranteed density 14 kg/m³. 2 Insulation supplied fitted up to the 1500 l model, supplied separately with larger sizes. MODEL 150 200 300 400 500 750 1.000 1500 2000 2500 3000 Effective storage capacity Diameter without insulation Diameter with insulation litres 150 200 300 400 500 750 1.000 1,500 2,000 2,500 3,000 mm 500 500 500 600 650 790 790 1.000 1,100 1,200 1,200 mm 610 610 610 710 760 950 950 1,200 1,300 1,400 1,400 HT: total height mm 995 1,265 1,710 1,690 1,780 1,870 2,120 2,285 2,550 2,680 2,980 LOWER heat exchange surface m 2 0.6 1.1 1.5 1.8 2.0 2.5 2.5 4.2 4.5 4.8 5.2 8TBO00410 Vert. DHW boiler 1 coil fx 150 l - H 585.36 8TBO00412 Vert. DHW boiler 1 coil fx 200 l - H 686.36 8TBO00414 Vert. DHW boiler 1 coil fx 300 l - H 861.78 8TBO00416 Vert. DHW boiler 1 coil fx 400 l - H 1,008.91 8TBO00418 Vert. DHW boiler 1 coil fx 500 l - H 1,158.36 8TBO00420 Vert. DHW boiler 1 coil fx 750 l - H 1,529.44 8TBO00422 Vert. DHW boiler 1 coil fx 1000 l - H 1,743.72 8TBO00424 Vert. DHW boiler 1 coil fx 1500 l - H 3,580.94 8TBO00426 Vert. DHW boiler 1 coil fx 2000 l - H 4,033.08 8TBO00428 Vert. DHW boiler 1 coil fx 2500 l - H 4,932.23 8TBO00430 Vert. DHW boiler 1 coil fx 3000 l - H 5,828.99 23
DHW BOILERS DHW BOILERS - 2 FIXED HEAT EXCHANGERS Boilers for the production of domestic hot water with two fixed coils. Main tank features: Construction material S235JR Internal vitrification per DIN 4753 p.3 Maximum DHW temperature 95 C Maximum heat-exchanger temperature 110 C External burnishing External finish in grey sky 2 Main insulation features: For 150-500 litre models: external insulation with direct PU injection, thickness 50mm, minimum guaranteed density 40 kg/m³ For 750-1000 litre models: external insulation in removable rigid PU sections, thickness 70mm, minimum guaranteed density 40 kg/m 3 For 1500-3000 litre models: soft, removable insulation 100mm, minimum guaranteed density 14 kg/m³ Insulation supplied fitted up to 1500 litre model, supplied separately with larger sizes. MODEL 200 300 400 500 750 1.000 1500 2000 2500 3000 Effective storage capacity litres 200 300 400 500 750 1.000 1,500 2,000 2,500 3,000 Diameter without insulation mm 500 500 600 650 790 790 1.000 1,100 1,200 1,200 Diameter with insulation mm 610 610 710 760 950 950 1,200 1,300 1,400 1,400 HT: total height mm 1,265 1,710 1,690 1,780 1,870 2,120 2,285 2,550 2,680 2,980 UPPER heat exchange surface LOWER heat exchange surface m 2 0.8 0.9 0.9 0.9 2.4 2.5 2.5 3 3.5 3.8 m 2 0.8 1.5 1.9 1.9 2.4 2.5 4.2 4.5 4.8 5.2 Max DHW pressure bar 10 10 10 10 10 10 10 10 10 10 Max. working temperature C 95 95 95 95 95 95 95 95 95 95 8TBO00440 Vert. DHW boiler 2 coils fx 200 l - H 788.39 8TBO00442 Vert. DHW boiler 2 coils fx 300 l - H 926.74 8TBO00444 Vert. DHW boiler 2 coils fx 400 l - H 1,119.77 8TBO00446 Vert. DHW boiler 2 coils fx 500 l - H 1,292.97 8TBO00448 Vert. DHW boiler 2 coils fx 750 l - H 1,731.23 8TBO00450 Vert. DHW boiler 2 coils fx 1000 l - H 1,827.24 8TBO00452 Vert. DHW boiler 2 coils fx 1500 l - H 3,821.18 8TBO00454 Vert. DHW boiler 2 coils fx 2000 l - H 4,456.49 8TBO00456 Vert. DHW boiler 2 coils fx 2500 l - H 5,386.86 8TBO00458 Vert. DHW boiler 2 coils fx 3000 l - H 6,317.20 2424
DHW BOILERS - 2 PREASSEMBLED COILS Hot water boiler for domestic hot water produced with a solar installation. Main tank features: Construction material S235JR Internal vitrification per DIN 4753 p.3 Max. DHW temperature 95 C Max. heat-exchanger temperature 110 C External burnishing Insulation obtained with direct injection of PU, thickness 50mm, minimum guaranteed density 40 kg/m 3 - External ABS finish in RAL 9006 grey Accessories included: Magnesium sacrificial anode Temperature gauge Solar pump unit installed on the boiler, complete with wired control unit Mains power supply cord (2 m) Schuko plug Wall-mount bracket for expansion tank Metal expansion tank support strap Screws and plugs for fixing Shut-off valve for expansion tank Flat gasket seals Stainless-steel hose (1 m) 2 MODEL 200 300 400 500 Effective storage capacity litres 200 300 400 500 Diameter without insulation mm 500 500 600 650 Diameter with insulation mm 610 610 710 760 HT: total height mm 1,265 1,710 1,690 1,780 UPPER heat exchange surface m 2 0.8 0.9 0.9 0.9 LOWER heat exchange surface m 2 0.8 1.5 1.9 1.9 Max DHW pressure bar 10 10 10 10 Max. working temperature C 95 95 95 95 8TBO00860 Vert. DHW boiler 2 coils fx 200 l - PREASSEMBLED H 1,555.69 8TBO00862 Vert. DHW boiler 2 coils fx 300 l - PREASSEMBLED H 1,725.50 8TBO00864 Vert. DHW boiler 2 coils fx 400 l - PREASSEMBLED H 1,895.31 8TBO00866 Vert. DHW boiler 2 coils fx 500 l - PREASSEMBLED H 2,080.13 25
DHW BOILERS DHW GENERATORS WITH OVERSIZED HEAT EXCHANGER - HEAT PUMP Boilers for the production and storage of DHW produced using traditional and alternative heat generators, heat pumps, solar power, energy recovery, etc... 2 Main tank features: Construction material S235JR Internal vitrification as per DIN 4753 p.3 Heat exchanger max. working pressure: 10 bar Maximum DHW working pressure: 10 bar Maximum DHW temperature: 95 C Maximum heat-exchanger temperature: 110 C External burnishing Main insulation features: External insulation with direct PU injection, thickness 50mm, minimum guaranteed density 40 kg/m³ External finish in skay RAL 7035, complete with pipe rosettes, black covers and plastic protective caps for connections. Accessories: Sacrificial anode External finish in skay RAL7035 grey MODEL 200 300 400 500 1.000 Tank volume litres 200 300 400 500 100 Boiler max. working pressure bar 10 10 10 10 10 Boiler max. working temp. C 95 95 95 95 95 Coil heat exchange surface m² 3.0 3.8 5.0 5.9 10.0 Total height H mm 1265 1710 1655 1785 2120 Outer diameter with insulation mm 610 610 710 760 950 Inner diameter without insulation mm 500 500 600 650 790 8TBO00726 DHW Boiler with 1 fx sp. h.exch. 200 l - HEAT PUMP - H 1,092.38 8TBO00728 DHW Boiler with 1 fx sp. h.exch. 300 l - HEAT PUMP - H 1,222.56 8TBO00730 DHW Boiler with 1 fx sp. h.exch. 400 l - HEAT PUMP - H 1,485.75 8TBO00732 DHW Boiler with 1 fx sp. h.exch. 500 l - HEAT PUMP - H 1,717.81 8TBO00738 DHW Boiler with 2 fx sp. h.exch. 350 l - HEAT PUMP - H 1,477.26 8TBO00740 DHW Boiler with 2 fx sp. h.exch. 500 l - HEAT PUMP - H 1,754.60 8TBO00744 DHW Boiler with 2 fx sp. h.exch. 1000 l - HEAT PUMP - H 3,103.35 2626
HORIZONTAL DOUBLE-WALL DHW BOILERS/COIL Wall-hung or base-mounted (on demand) DHW generators with storage tank, particularly suitable for small-medium systems and for mounting in small spaces. They offer plenty hot water and versatility of use. They can be mounted vertically or horizontally and even with natural circulation. Made from high-quality S235JR EN10025 steel sheet, assembled and welded using automatic systems in a controlled atmosphere. Anti-corrosion treatment achieved by means of a hygienic organic coating made of Fluorocarbon resins - PTFE (polytetrafluoroethylene), suitable for use and consumption of drinking water according to MD 174/2004 and EC Directive 76/893 Sacrificial magnesium anodes on threaded plug. Rigid polyurethane foam External finish in PVC with hinge and thermoformed cover 3-year warranty 5-year warranty (coil model) Certification compliant with Directive 97/23/EC - Art. 3 - Par. 3 POA fastening brackets 2 MODEL 80 100 150 200 300 Effective storage capacity litres 90 110 165 230 320 Diameter without insulation mm 400 400 450 500 550 Diameter with insulation mm 460 460 510 520 650 Total height mm 955 1080 1100 1130 1400 Double-wall heat exchange surface m 2 0.5 0.6 0.75 1 1.4 Coil model heat exchange surface m 2 - - - - 1.5 *Coil power kw - - - - 66.8 Dry weight kg 35 40 55 65 75 Dry weight of coil model kg - - - - 65 Secondary circuit (DHW storage) max. working pressure bar 8 8 8 8 8 Secondary circuit (DHW storage) test pressure bar 12 12 12 12 12 Max. working temperature C 65 Double-wall heat exchanger max. working pressure bar 3 8TBO00091 Sol. Boil. 80-l horizontal DHW - for indoors 471.90 8TBO00092 Sol. Boil. 100-l horizontal DHW - for indoors 502.70 8TBO00093 Sol. Boil. 150-l horizontal DHW - for indoors 605.00 8TBO00094 Sol. Boil. 200-l horizontal DHW - for indoors 701.80 8TBO00095 Sol. Boil. 300-l horizontal DHW - for indoors 847.00 8TBO00088 Sol. Boil. DHW horiz. 1 coil 300 l - for indoors 1,028.50 27
LARGE VOLUME DHW BOILERS TEFLON coated boiler 3000-4000-5000, ready for use with tube bundle heat exchanger, complete with insulation Main tank features: Construction material S235JR Corrosion treatment: thermosetting powder coating suitable for use with drinking water (Teflon coating). Maximum DHW working pressure: 8 bar Maximum DHW temperature: 90 C Hatch: manhole flange Ø480x400 mm 2 Main insulation features: Removable, soft polyurethane 50 mm thick, minimum guaranteed density 14 kg/m³. Complete with pipe rosettes, black covers and plastic protective caps for connections Insulation supplied unassembled External finish in skay RAL 9006 grey Accessories: Magnesium sacrificial anode Can be used with tube bundle heat exchanger 8TBO00762 Teflon DHW boiler 3000 l - 0 coil - for tube bundle heat exchanger - H 3,933.70 8TBO00764 Teflon DHW boiler 4000 l - 0 coil - for tube bundle heat exchanger - H 4,949.67 8TBO00766 Teflon DHW boiler 5000 l - 0 coil - for tube bundle heat exchanger - H 6,112.80 8TBO00772 Steel tube bundle heat exchanger - Ø 480-4 m 2 - H 1,216.90 8TBO00774 Steel tube bundle heat exchanger - Ø 480-5 m 2 - H 1,364.06 8TBO00776 Steel tube bundle heat exchanger - Ø 480-6 m 2 - H 1,542.35 8TBO00778 Steel tube bundle heat exchanger - Ø 480-8 m 2 - H 1,895.31 8TBO00780 Steel tube bundle heat exchanger - Ø 480-10 m 2 - H 2,085.27 2828
STORAGE TANKS DHW BOILERS - REMOVABLE COIL (OPTIONAL) DHW storage with installation of one or more heat exchangers, possibility to alter the heat-exchanger surface area on the basis of the types of heat generators used, e.g. solar collectors, boilers, heat pumps, energy storage vessels, etc. High-quality S235JR EN10025 steel sheet, assembled and welded using automatic systems in a controlled atmosphere. CATHODIC PROTECTION: sacrificial magnesium anodes on threaded plug. INSULATION AND EXTERNAL FINISH: 50 mm rigid PU insulation sections up to 1000 model and 100 mm flexible PU insulation for remaining models, external finish in PVC with hinge and thermoformed cover. 5-year warranty MODEL 500 1.000 1500 2000 3000 4000 5000 Storage capacity litres 500 920 1435 1980 2910 3710 4945 d Diam. w/out insulat. mm 650 800 950 1100 1250 1400 1600 D Diam. with flex. insulat. mm - - 1150 1300 1450 1600 1800 D Diam. with rigid insulat. mm 750 900 - - - - - HT Total height mm 1726 2056 2391 2436 2760 2821 2851 K Max. height in overturning mm 1750 2070 2410 2460 2780 2860 2920 E Cold water inlet G 1 ¼ 1 ½ 2 2 2 ½ 3 3 U DHW outlet G 1 ¼ 1 ¼ 2 2 2 ½ 3 3 RC DHW recirculation G 1 ¼ 1 ½ 2 2 2 ½ 3 3 RE Electrical resist. connection G 1 ¼ 1 ½ 1 ½ 1 ½ 2 2 2 S Discharge G ½ ½ 1 ¼ 1 ¼ 1 ¼ 1 ¼ 1 ¼ A Magnesium anode connect. G 1 ¼ 1 ½ 1 ½ 1 ½ 1 ½ 1 ½ 1 ½ So Sensor connect. G ½ ½ ½ ½ ½ ½ ½ AE Electronic anode connect. G - ½ ½ ½ ½ ½ ½ No. flange Ø300 Ø220 no. 2 3 3 3 3 3 3 OP Max. working pressure bar 8 8 6 6 6 6 6 PC Test pressure bar 12 12 9 9 9 9 9 OT Max. working temperature C 100 PS Heat exchanger max. working pressure bar 12 2 8TBO00027 Vertical hot water boiler DHW 500 Litre - for removable heat exchangers 1,286.28 8TBO00028 Vertical hot water boiler DHW 1000 Litre - for removable heat exchangers 1,962.36 8TBO00029 Vertical hot water boiler DHW 1500 l - for removable heat exchangers 2,959.20 8TBO00030 Vertical hot water boiler DHW 2000 l - for removable heat exchangers 3,337.20 8TBO00032 Vertical hot water boiler DHW 3000 l - for removable heat exchangers 4,438.80 8TBO00033 Vertical hot water boiler DHW 4000 l - for removable heat exchangers 4,557.60 8TBO00035 Vertical hot water boiler DHW 5000 l - for removable heat exchangers 5,140.80 29
MULTIENERGY THERMAL INERTIAL STORAGE Storage/buffer for heating systems, highly insulated to avoid heat loss. Hatches allow different heat exchangers to be installed to take advantage of different energy sources (solar, high and low temperature, heat pumps, biomass generators, recovered energy) 2 CONSTRUCTION: made from high-quality S235JR EN10025 steel sheet, assembled and welded using automatic systems in a controlled atmosphere. INSULATION Removable rigid PU insulation sections. EXTERNAL FINISH in embossed aluminium, front plate in painted steel and thermoformed cover. 5-year WARRANTY against corrosion CERTIFICATION compliant with Directive 97/23/EC - Art. 3 - Par. 3 MODEL 450 750 1250 2000 Effective capacity litres 480 780 1,260 1,980 d Diameter without insulation mm 650 790 950 1,100 D Diameter with insulation mm 820 960 1,120 1,270 HT Total height mm 1,780 1,850 2,170 2,455 Number of flanges Ø220 Ø300 no. 6 6 8 8 Product weight when empty (without heat exchangers) kg 140 180 275 300 OP Max. working pressure bar 6 6 6 6 PC Test pressure bar 9 9 9 9 OT Max. working temperature C 100 100 100 100 8TBO00160 Thermal inertial storage boiler - 6 flange - 450 l 1,728.00 8TBO00162 Thermal inertial storage boiler - 6 flange - 750 l 2,080.96 8TBO00164 Thermal inertial storage boiler - 8 flange - 1250 l 3,407.40 8TBO00166 Thermal inertial storage boiler - 8 flange - 2000 l 3,840.48 3030
ACCESSORIES COPPER HEAT EXCHANGERS COPPER FINNED HEAT EXCHANGERS Heat exchangers, single (up to 3.2 m 2 ) or double spiral, built with finned copper tube fastened to a Ø300 mm flange. Stainless steel 316 heat exchangers available according to a specific design HEAT EXCHANGER SURFACE AREA (M 2 ) 0.75 1.30 1.80 2.30 2.60 3.20 4.50 5.30 6.30 P1 (kw) (primary 60-50 C)* 6.2 9.4 12.8 15.2 19.6 22.5 30.1 37.4 45.0 P2 (kw) (primary 90-70 C)* 19.8 36.1 40.7 59.3 68.6 82.6 118.6 136.7 165.1 * The power supplied by the heat exchangers refers to DHW heating from 15 to 45 C 2 8TBO00060 Copper finned heat exchanger - 0.75 m 2 272.48 8TBO00062 Copper finned heat exchanger - 1.3 m 2 358.80 8TBO00064 Copper finned heat exchanger - 1.8 m 2 429.00 8TBO00066 Copper finned heat exchanger - 2.3 m 2 525.20 8TBO00068 Copper finned heat exchanger - 2.6 m 2 589.68 8TBO00070 Copper finned heat exchanger - 3.2 m 2 700.96 8TBO00072 Copper finned heat exchanger - 4.5 m 2 1,016.60 8TBO00074 Copper finned heat exchanger - 5.3 m 2 1,159.60 8TBO00076 Copper finned heat exchanger - 6.3 m 2 1,406.08 8TBO00080 Blank flange, D300 mm, with seal 45.76 8TBO00082 Perforated flange with seal for heat exchangers 56.16 ELECTRIC HEATERS 8TSO00245 Electric heater 8kW (400V/3) on plug G 1 1/2 334.80 8TSO00246 Electric heater 8kW (400V/3) on plug G 1 1/2 - therm. 590.76 8TSO00247 Electric heater 10kW (400V/3) on plug G 1 1/2 360.72 8TSO00248 Electric heater 10kW (400V/3) on plug G 1 1/2 - therm. 1,541.70 8TSO00250 Electric heater 12kW (400V/3) on plug G 1 1/2 - therm. 643.68 8TSO00260 Electric heater 20kW (400V/3) on plug G 2 1/2 - therm. 930.00 8TSO00270 Electric heater 30kW (400V/3) on plug G 2 1/2 - therm. 1,014.00 8TSO00271 Electric heater 30kW (400V/3) on plug G 2 - without therm. 843.00 31
BOILERS FOR HEAT PUMPS 2 Main tank features: Construction material S235JR; DHW tank with internal vitrification as per DIN 4753 p.3 Surface Coil 3.2 m 2 Heat exchanger maximum working pressure: 10 bar DHW tank maximum working pressure: 10 bar Puffer maximum working pressure: 3 bar Maximum temperature: 95 C Maximum heat-exchanger temperature: 110 C Heat exchange surface: as per attached diagram External burnishing Flange plate Ø 170 Main insulation features: External insulation with direct PU injection, thickness 50mm, minimum guaranteed density 40 kg/m³, external PVC finish, RAL 9006 grey, complete with pipe rosettes and black covers. MODEL 300 BOILER SPECIFICATIONS boiler capacity Litres 300 max. working pressure bar 10 max. temperature C 95 Total height mm 1695 outer diameter (with insulation) mm 700 inner diameter (without insulation) mm 600 PUFFER SPECIFICATIONS puffer capacity Litres 100 max. working pressure bar 3 max. temperature C 95 COIL SPECIFICATIONS coil capacity Litres 18.5 coil heat exchange surface m 2 3.2 max. working pressure bar 10 8TBO00330 Combined boiler 300 l DHW and 100 l water for heating - HEAT PUMP 1,701.00 3232
STORAGE TANKS COMBI THERMAL INERTIAL STORAGE Combi technique thermal inertial tank. Tank Structure. CONSTRUCTION: high-quality S235JR sheet steel DHW heat exchanger in AISI 316L - DN32 stainless steel RAL 7015 anti-corrosion external paint Assembled external insulation in 100mm soft PU, density 14 kg/m 3 External finish in RAL9006 grey sky 2 MODEL 500 800 1000 1500 2000 Effective storage capacity Litres 500 800 1,000 1,500 2,000 Diameter without insulation mm 650 790 790 1,000 1,100 Diameter with insulation mm 850 990 990 1,200 1,300 HT: total height mm 1,720 1,910 2,090 2,220 2,360 Surf. Upper coil m 2 2.3 2.00 3.00 3.50 4.20 Surf. Lower coil m 2 2.30 3.00 3.00 3.00 5.50 Surf. Stainless steel DHW coil m 2 5.64 5.64 5.64 5.64 5.64 Max thermal inertial tank pressure bar 3 3 3 3 3 Max DHW pressure bar 8 8 8 8 8 Max coil pressure bar 10 10 10 10 10 Max. working temperature C 95 95 95 95 95 Dry weight kg 105 200 250 285 325 Probe connections DN 1/2 1/2 1/2 1/2 1/2 DHW coil connections DN 1 1 1 1 1 Heating connections DN 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 Coil connections (solar + tank) DN 1 1 1 1 1 8TBO00470 Vert. stainless combi boiler 2 coils fx 500 l - H 1,802.84 8TBO00478 Vert. combi boiler, stainless steel, 2 coils fx 800 l - H 2,098.40 8TBO00479 Vert. combi boiler, stainless steel, 3 coils fx 500 l - H 2,087.88 8TBO00480 Vert. combi boiler, stainless steel, 3 coils fx 800 l - H 2,122.69 8TBO00482 Vert. combi boiler, stainless steel, 3 coils fx 1000 l - H 2,212.58 8TBO00484 Vert. combi boiler, stainless steel, 3 coils fx 1500 l - H 2,871.87 8TBO00486 Vert. combi boiler, stainless steel, 3 coils fx 2000 l - H 3,296.39 33
TANK IN TANK THERMAL INERTIAL STORAGE Thermal inertial storage-hot water production tank, composed of a unit which receives and distributes energy produced by traditional or alternative sources, directly or indirectly, via heat exchangers inside the inertial tank. The hot water required to supply the different types of thermal systems is taken from this tank: at high temperature if the water is taken from the upper part of the thermal inertial tank, at low temperature if the water is taken from the lower part. The DHW production/storage unit is installed inside the thermal inertial tank in this system. 2 High-quality S235JR EN10025 sheet steel 3 Versions available: 0, 1 or 2 heat exchangers Fixed spiral heat exchangers with S235JR EN10025 steel tubes welded to the tank DHW production/storage unit in enamelled steel (EMAIL) INSULATION in rigid polyurethane for models 220 600 and flexible polyurethane for the remaining models EXTERNAL FINISH in PVC with hinge and thermoformed cover CATHODIC PROTECTION with sacrificial magnesium anodes on threaded plug Internal vitrification for CORROSION PROOFING MODEL 600/180 800/180 800/300 1000/180 1000/300 Total thermal storage tank capacity Litres 585 800 800 900 900 DHW capacity Litres 175 175 295 175 295 Diameter with insulation mm 855 955 955 995 995 HT: total height mm 1,890 1,930 1,930 2,050 2,050 LOWER heat exchange surface m 2 2.0 3.0 3.0 3.0 3.0 UPPER heat exchange surface m 2-3.0-3.0 - TECHNICAL SPECIFICATIONS Max. DHW pressure bar 6 6 6 6 6 Max. puffer pressure bar 3 3 3 3 3 Max. working temperature C 100 100 100 100 100 Empty product weight - 0 coils kg 135 165 180 185 195 Empty product weight - 1 coil kg 165 190 205 210 220 Empty product weight - 2 coils kg - 215-235 - Warranty 5-year corrosion warranty 8TBO00137 Vert. combi boiler, TinT, 1 coil fx 220/100 litres 1,276.80 8TBO00140 Vert. combi boiler, TinT, 1 coil fx 600/180 litres 1,735.56 8TBO00142 Vert. combi boiler, TinT, 1 coil fx 800/180 litres 2,046.60 8TBO00143 Vert. combi boiler, TinT, 1 coil fx 800/300 litres 2,024.80 8TBO00145 Vert. combi boiler, TinT, 1 coil fx 1000/180 litres 2,091.32 8TBO00146 Vert. combi boiler, TinT, 1 coil fx 1000/300 litres 2,369.52 8TBO00150 Vert. combi boiler, TinT, 2 coils fx 600/100 litres 1,868.40 8TBO00152 Vert. combi boiler, TinT, 2 coils fx 800/180 litres 2,313.36 8TBO00154 Vert. combi boiler, TinT, 2 coils fx 1000/180 litres 2,569.32 8TBO00156 Vert. combi boiler, TinT, 0 coils fx 600/180 litres 1,523.20 8TBO00157 Vert. combi boiler, TinT, 0coils fx 800/180 litres 1,915.20 8TBO00158 Vert. combi boiler, TinT, 0 coils fx 800/300 litres 2,100.00 8TBO00159 Vert. combi boiler, TinT, 0 coils fx 1000/180 litres 2,028.40 3434
PUFFER AND PUFFER THERMAL INERTIAL STORAGE - WITHOUT COIL Main tank features: Construction material S235JR RAL 7015 anti-corrosion external paint Main insulation features: External insulation made of removable soft PU assembled or supplied separately, thickness 100mm, density 14 kg/m 3, complete with pipe rosettes, black covers and protective caps for plastic connections External finish in skay, colour to be agreed upon. Insulation assembled up to 2000 l models, supplied separately for larger sizes. Main packing features: Packed vertically on a standalone pallet up to 3000 l models. Packed horizontally and wrapped in a bubble bag for larger sizes. MODEL 500 800 1000 1500 2000 3000 5000 Tank volume Litres 500 800 1000 1500 2000 3000 5000 Storage max. working pressure bar 3 3 3 3 3 3 3 Storage max. working temp. C 95 95 95 95 95 95 95 Total height mm 1,640 1,750 2,050 2,150 2,408 2,515 2,895 Outer diameter with insulation mm 850 990 990 1,200 1,300 1,450 1,800 Inner diameter without insulation mm 650 790 790 1,000 1,100 1,250 1,600 Connections A mm 210 260 310 372 328 390 495 Connections B mm 605 630 745 817 885 950 1,120 Connections C mm 995 1,030 1,250 1,342 1,441 1,510 1,745 Connections E mm 1,345 1,430 1,710 1,752 1,998 2,070 2,375 2 8TBO00261 Puffer storage without coil - 300 l with insulat. - H 585.70 8TBO00262 Puffer storage without coil - 500 l with insulat. - H 647.64 8TBO00263 Puffer storage without coil - 800 l with insulat. - H 786.97 8TBO00264 Puffer storage without coil - 1000 l with insulat. - H 836.00 8TBO00265 Puffer storage without coil - 1500 l with insulat. - H 1,217.86 8TBO00266 Puffer storage without coil - 2000 l with insulat. - H 1,501.67 8TBO00267 Puffer storage without coil - 2500 l with insulat. - H 1,821.62 8TBO00268 Puffer storage without coil - 3000 l with insulat. - H 1,937.74 8TBO00269 Puffer storage without coil - 4000 l with insulat. - H 3,573.58 8TBO00270 Puffer storage without coil - 5000 l with insulat. - H 3,939.96 *possibility of hot/cold puffers with anti-condensation coating 35
PUFFER AND PUFFER THERMAL INERTIAL STORAGE - 1 COIL Main tank features: Construction material S235JR RAL 7015 anti-corrosion external paint Main insulation features: External insulation made of removable soft PU assembled or supplied separately, thickness 100mm, density 14 kg/m 3, complete with pipe rosettes, black covers and protective caps for plastic connections External finish in skay, colour to be agreed upon. Insulation assembled up to 2000 l models, supplied separately for larger sizes. 2 Main packing features: Packed vertically on a standalone pallet up to 3000 l models. Packed horizontally and wrapped in a bubble bag for larger sizes. MODEL 500 800 1000 1500 2000 3000 5000 500 800 1000 1500 2000 3000 5000 Tank volume Litres 500 800 1000 1500 2000 3000 5000 Storage max. working pressure bar 3 3 3 3 3 3 3 Storage max. working temp. C 95 95 95 95 95 95 95 DT Coil water prod. = 35 C (80/60-10/45) m3/h (kw) Coil heat exchange surface m 2 1.8 2.4 3 3.6 4.2 5 5 Total height mm 1,640 1,700 2,050 2,150 2,408 2,515 2,895 Outer diameter (with insulation) mm 850 990 990 1,200 1,300 1,450 1,800 Inner diameter without insulation mm 650 790 790 1,000 1,100 1,250 1,600 Connections A mm 210 260 310 372 328 390 495 Connections B mm 605 630 745 817 885 950 1,120 Connections C mm 995 1,030 1,250 1,342 1,441 1,510 1,745 Connections D mm 1,345 1,380 1,710 1,752 1,998 2,070 2,375 Connections E mm 210 260 310 372 328 390 495 Connections F mm 1,105 930 1,030 1,172 1,131 1,140 1,265 1.5 (44) 1.5 (59) 1.8 (74) 2.2 (89) 2.6 (103) 3.2 (123) 4 (123) 8TBO00272 Puffer storage with 1 coil - 500 l with insulat. - H 771.48 8TBO00273 Puffer storage with 1 coil - 800 l with insulat. - H 936.60 8TBO00274 Puffer storage with 1 coil - 1000 l with insulat. - H 1,060.60 8TBO00275 Puffer storage with 1 coil - 1500 l with insulat. - H 1,429.43 8TBO00276 Puffer storage with 1 coil - 2000 l with insulat. - H 1,746.81 8TBO00277 Puffer storage with 1 coil - 2500 l with insulat. - H 2,077.07 8TBO00278 Puffer storage with 1 coil - 3000 l with insulat. - H 2,193.18 8TBO00279 Puffer storage with 1 coil - 4000 l with insulat. - H 3,800.64 8TBO00280 Puffer storage with 1 coil - 5000 l with insulat. - H 4,172.20 3636
PUFFER AND PUFFER THERMAL INERTIAL STORAGE - 2 COILS Storage/buffer for heating systems, highly insulated to avoid heat loss. One or two fixed heat exchangers (depending on version) for systems with biomass generators, solar installations and integration with external sources. CONSTRUCTION: made from high-quality S235JR EN10025 steel sheet, assembled and welded using automatic systems in a controlled atmosphere. Fixed spiral heat exchangers (depending on model) with S235JR EN10025 steel tubes welded to the tank CORROSION TREATMENT: External rust-proof paint INSULATION: Rigid polyurethane for models 200 500 and flexible polyurethane for the remaining models EXTERNAL FINISH: PVC with hinge and thermoformed cover MODEL 300 500 800 1000 1500 2000 2500 3000 4000 5000 Tank volume Litres 300 500 800 1000 1500 2000 2500 3000 4000 5000 Storage max. working pressure bar 3 3 3 3 3 3 3 3 3 3 Storage max. working temp. C 95 95 95 95 95 95 95 95 95 95 Water prod. UPPER coil DT = 35 C (80/60-10/45) Water prod. UPPER coil DT = 35 C (80/60-10/45) m3/h (kw) m3/h (kw) 0.6 (22) 1.0 (37) 0.7 (24) 1.2 (44) Flow rate required at UPPER coil m3/h 1.0 1.0 1.6 1.6 2.7 2.7 2.7 4.2 (123) 4.5 Flow rate required at LOWER coil m3/h 1.7 2.1 2.7 3.2 3.9 4.5 4.5 5.7 6.1 7 UPPER coil heat exchange surface m 2 0.9 1.0 1.5 1.5 2.4 2.4 2.4 3.8 4.0 4.2 LOWER coil heat exchange surface m 2 1.5 1.8 2.4 3.0 3.6 4.2 4.2 5.0 5.0 5.0 1.0 (37) 1.5 (59) Total height mm 1,510 1,640 1,700 2,050 2,150 2,408 2,265 2,515 2,370 2,895 Outer diam. with insulation mm 750 850 990 990 1,200 1,300 1,450 1,450 1,800 1,800 Inner diam. without insulation mm 550 650 790 790 1,000 1,100 1,250 1,250 1,600 1,600 Connections mm 210 210 260 310 372 328 390 390 495 495 Connections mm 550 605 630 745 817 885 870 950 955 1,120 Connections mm 890 995 1,030 1,250 1,342 1,441 1,345 1,510 1,415 1,745 Connections mm 1,225 1,345 1,380 1,710 1,752 1,998 1,820 2,070 1,875 2,375 Connections mm 210 210 260 310 372 328 390 390 495 495 Connections mm 660 770 930 1,030 1,172 1,131 1,193 1,140 1,265 1,265 UPPER coil return mm 890 995 1,050 1.250 1,342 1,441 1,345 1,510 1,415 1,745 UPPER coil delivery mm 1,140 1,295 1,330 1,530 1,732 1,881 1,785 1,990 1,975 2,305 1.0 (37) 1.8 (74) 1.6 (59) 2.2 (89) 1.6 (59) 2.6 (103) 1.6 (59) 1.2 (103) 2.4 (93) 3.2 (123) 2.6 (98) 3.5 (123) 2.7 103 4 (123) 2 8TBO00281 Puffer storage with 2 coils - 300 l with insulat. - H 771.48 8TBO00282 Puffer storage with 2 coils - 500 l with insulat. - H 854.06 8TBO00283 Puffer storage with 2 coils - 800 l with insulat. - H 1,044.99 8TBO00284 Puffer storage with 2 coils - 1000 l with insulat. - H 1,127.56 8TBO00285 Puffer storage with 2 coils - 1500 l with insulat. - H 1,584.24 8TBO00286 Puffer storage with 2 coils - 2000 l with insulat. - H 1,909.35 8TBO00287 Puffer storage with 2 coils - 2500 l with insulat. - H 2,251.96 8TBO00288 Puffer storage with 2 coils - 3000 l with insulat. - H 2,476.99 8TBO00289 Puffer storage with 2 coils - 4000 l with insulat. - H 4,141.23 8TBO00290 Puffer storage with 2 coils - 5000 l with insulat. - H 4,538.58 37
UNDERGROUND BOILERS System consisting of a monolithic concrete tank with an internal carbon steel storage tank to store hot water for heating. The gap between the concrete tank and the steel tank is filled with a thick layer of cellular glass that insulates the entire unit. System features: Available in 7 sizes, from 2,000 to 13,400 l of useful capacity Extremely low casing heat loss Option to install a large heat exchanger for solar circuits Option of various customisations, such as additional heat exchangers, stratification devices, etc. 2 threaded storage pressure tubing in STAINLESS STEEL AISI304 2 MODEL 2,000 3,000 4,800 6,500 8,400 10,700 13,400 Volume Litres 2,050 3,000 4,800 6,500 8,400 10,700 13,400 Heat loss W/K 4.20 4.88 6.44 7.29 8.94 10.27 13.26 Heating capacity MJ/K 8.4 12.3 19.7 26.7 34.4 43.9 56.3 Storage max. temp. C 95 95 95 95 95 95 95 Max. pressure bar 3 3 3 3 3 3 3 Connection size 2 2 2 2 2 2 2 a mm 1900 2400 2300 2800 2750 3250 3250 b mm 1715 2215 2115 2615 2380 2880 2985 d mm 2845 3345 3245 3745 3305 3805 3805 e mm 1500 1500 2000 2000 2500 2500 2700 f mm 2000 2000 2500 2500 3000 3000 3000 g mm 2240 2240 2740 2740 3300 3300 3300 8TBO00680 Underground puffer storage tank - 2000 l POA 8TBO00683 Underground puffer storage tank - 3000 l POA 8TBO00686 Underground puffer storage tank - 4800 l POA 8TBO00689 Underground puffer storage tank - 6500 l POA 8TBO00692 Underground puffer storage tank - 8400 l POA 8TBO00695 Underground puffer storage tank - 10700 l POA 8TBO00698 Underground puffer storage tank - 13400 l POA 3838
39 2
3 SYSTEM ACCESSORIES 4040
41 3
PRE-INSULATED STAINLESS-STEEL TUBING CORRUGATED AND STRIPWOUND STAINLESS-STEEL TUBING Pre-insulated high-quality stainless steel hoses ensure the best results for a pre-packaged solar system. Ring stainless hose Quick installation High solar performance thanks to high level of insulation Available in cases with reels of: 10-15 - 20-25 - 50 metres For larger sizes 100 m: Hose reel CODE PRODUCT PRICE ( /m) 8TKR00480 Double corrugated steel hose ECO DN 16mm / Insulation 20mm 25.22 3 8TKR00176 CORRUGATED fitting DN 16 x F 3/4 15.32 8TKR00178 CORRUGATED fitting DN 16 x M 3/4 12.01 8TKR00171 CORRUGATED coupling DN 16 x DN 16 39.48 4242
PRE-INSULATED STAINLESS-STEEL TUBING CORRUGATED AND STRIPWOUND STAINLESS-STEEL TUBING Pre-insulated high-quality stainless steel hoses ensure the best results for a pre-packaged solar system. STRIPWOUND STAINLESS tube Less pressure loss More silent operation Better air expulsion Graphite seals Insulation resistant to 170 C Seals resistant to 450 C Available in cases with reels of 10-15 - 20-25 - 50 metres For larger sizes 100 m: Hose reel CODE PRODUCT PRICE ( /m) 8TKR00510 Double SPIRALROHR stripwound steel hose DN 15mm / Insulation 20mm 38.08 8TKR00511 Single SPIRALROHR stripwound steel hose DN 15mm / Insulation 20mm 18.58 8TKR00512 Double SPIRALROHR stripwound steel hose DN 20mm + 3 rd HOSE / Insulation 20mm 46.36 8TKR00514 Double SPIRALROHR stripwound steel hose DN 20mm / Insulation 20mm 43.59 8TKR00515 Single SPIRALROHR stripwound steel hose DN 20mm / Insulation 20mm 31.05 8TKR00518 Double SPIRALROHR stripwound steel hose DN 25mm / Insulation 20mm 50.87 8TKR00519 Single SPIRALROHR stripwound steel hose DN 25mm / Insulation 20mm 42.53 8TKR00523 Single SPIRALROHR stripwound steel hose DN 32mm / Insulation 20mm 44.82 FITTINGS 8TKR00180 SPIRALROHR stripwound fitting DN 15 x F 3/4 16.50 8TKR00181 SPIRALROHR stripwound fitting DN 20 x F 3/4 19.09 8TKR00182 SPIRALROHR stripwound fitting DN 20 x F 1/2 18.00 8TKR00186 SPIRALROHR stripwound fitting DN 25 x F 3/4 24.20 8TKR00188 SPIRALROHR stripwound fitting DN 25 x F 1" 24.89 8TKR00242 Spiralrohr DN 25 union 37.27 8TKR00200 SPIRALROHR stripwound fitting DN 15 x M 3/4 12.65 8TKR00202 SPIRALROHR stripwound fitting DN 15 x M 1/2 12.78 8TKR00206 SPIRALROHR stripwound fitting DN 20 x M 3/4 16.78 8TKR00210 SPIRALROHR stripwound fitting DN 25 x M 1 23.24 8TKR00214 SPIRALROHR stripwound fitting DN 32 x M 1 1/4 36.16 8TKR00232 SPIRALROHR stripwound reduction DN 25 x DN 20 53.76 8TKR00236 SPIRALROHR stripwound reduction DN 32 x DN 25 84.17 8TKR00240 SPIRALROHR DN 15 union 18.33 8TKR00241 SPIRALROHR DN 20 union 25.70 8TKR00252 TEE fitting DN 15 - SPIRALROHR 31.49 8TKR00256 TEE fitting DN 20 - SPIRALROHR 48.54 8TKR00260 TEE fitting DN 25 - SPIRALRHOR 72.77 8TKR00262 TEE fitting DN 32 - SPIRALRHOR 97.10 8TKR00163 Graphite gasket sealing for DN15 hose 6.05 8TKR00165 Graphite gasket sealing for DN25 hose 10.11 3 43
SOLAR STATIONS Single-line solar pump station Flow meter-regulator with plant filling and draining valves. High efficiency synchronous solar circulator including cables. 3-Way flanged ball valve with non-return valve, 10 mbar (the non-return valve can be bypassed by turning the handle by 45 ) provided with a temperature gauge holder (temperature gauge with blue ring 0-120 C) Safety unit, 6 bar with Ø50 mm 0-10 bar pressure gauge with 3/4 M connection for expansion vessel. Drain outlet 3/4 F. 3 8TBR00031 Solar station 1V - Yonos Para ST 25/7.0-1-6 l/min. - 3/4 M 367.23 8TBR00032 Solar station 1V - Yonos Para ST 25/7.0-2-12 l/min. - 3/4 M 367.23 8TBR00033 Solar station 1V - Yonos Para ST 25/7.0-8-28 l/min. - 3/4 M 367.23 8TBR00034 Solar station 1V - Yonos Para ST 25/7.0-8-38 l/min. - 3/4 M 367.23 8TBR00035 Solar station 1V - Yonos Para ST 25/7.5-1-6 l/min. - 3/4 M 385.43 8TBR00036 Solar station 1V - Yonos Para ST 25/7.5-2-12 l/min. - 3/4 M 385.43 8TBR00037 Solar station 1V - Yonos Para ST 25/7.5-8-28 l/min. - 3/4 M 385.43 8TBR00038 Solar station 1V - Yonos Para ST 25/7.5-8-38 l/min. - 3/4 M 385.43 8TBR00041 Solar station 1V - Yonos Para ST 25/7.0-1-6 l/min. - 1 M 367.23 8TBR00042 Solar station 1V - Yonos Para ST 25/7.0-2-12 l/min. - 1 M 367.23 8TBR00043 Solar station 1V - Yonos Para ST 25/7.0-8-28 l/min. - 1 M 367.23 8TBR00044 Solar station 1V - Yonos Para ST 25/7.0-8-38 l/min. - 1 M 367.23 8TBR00045 Solar station 1V - Yonos Para ST 25/7.5-1-6 l/min. - 1 M 385.43 8TBR00046 Solar station 1V - Yonos Para ST 25/7.5-2-12 l/min. - 1 M 385.43 8TBR00047 Solar station 1V - Yonos Para ST 25/7.5-8-28 l/min. - 1 M 385.43 8TBR00048 Solar station 1V - Yonos Para ST 25/7.5-8-38 l/min. - 1 M 385.43 444
Two-line solar pump station RETURN: Flow meter-regulator with plant filling and draining valves. High efficiency synchronous solar circulator including cables. 3-Way flanged ball valve with non-return valve,10 mbar (the non-return valve can be bypassed by turning the handle by 45 ) provided with a temperature gauge holder (temperature gauge with blue ring 0-120 C). Safety unit, 6 bar with ø50 mm 0-10 bar pressure gauge with 3/4 M connection for expansion vessel. Drain outlet 3/4 F DELIVERY: Flanged ball valve with non-return valve, 10 mbar (the non-return valve can be bypassed by turning the handle by 45 ) provided with a temperature gauge holder (temperature gauge with red ring 0-120 C). Brass deaerator with manual relief valve Connecting pipe 3 8TBR00094 Solar station 2V - Yonos Para ST 25/7.0-1-6 l/min. - 3/4 M 460.91 8TBR00095 Solar station 2V - Yonos Para ST 25/7.0-2-12 l/min. - 3/4 M 460.91 8TBR00096 Solar station 2V - Yonos Para ST 25/7.0-8-28 l/min. - 3/4 M 460.91 8TBR00097 Solar station 2V - Yonos Para ST 25/7.0-8-38 l/min. - 3/4 M 460.91 8TBR00098 Solar station 2V - Yonos Para ST 25/7.5-1-6 l/min. - 3/4 M 479.11 8TBR00099 Solar station 2V - Yonos Para ST 25/7.5-2-12 l/min. - 3/4 M 479.11 8TBR00100 Solar station 2V - Yonos Para ST 25/7.5-8-28 l/min. - 3/4 M 479.11 8TBR00101 Solar station 2V - Yonos Para ST 25/7.5-8-38 l/min. - 3/4 M 479.11 8TBR00106 Solar station 2V - Yonos Para ST 25/7.0-1-6 l/min. - 1 M 460.91 8TBR00107 Solar station 2V - Yonos Para ST 25/7.0-2-12 l/min. - 1 M 460.91 8TBR00108 Solar station 2V - Yonos Para ST 25/7.0-8-28 l/min. - 1 M 460.91 8TBR00109 Solar station 2V - Yonos Para ST 25/7.0-8-38 l/min. - 1 M 460.91 8TBR00110 Solar station 2V - Yonos Para ST 25/7.5-1-6 l/min. - 1 M 479.11 8TBR00111 Solar station 2V - Yonos Para ST 25/7.5-2-12 l/min. - 1 M 479.11 8TBR00112 Solar station 2V - Yonos Para ST 25/7.5-8-28 l/min. - 1 M 479.11 8TBR00113 Solar station 2V - Yonos Para ST 25/7.5-8-38 l/min. - 1 M 479.11 45
TWIN-LINE SOLAR STATION - DN35 RETURN: Flow meter-regulator 5-42 l/min. or 20-70 l/min. High efficiency synchronous solar circulator including cables, 0-10V controller. Flanged ball valve with non-return valve, 18 mbar (the non-return valve can be bypassed by turning the handle by 45 ) provided with a temperature gauge holder (temperature gauge with blue ring 0-120 C). TEE fitting for safety unit. Safety unit, 6 bar with ø50 mm 0-10 bar pressure gauge with 3/4 M connection for expansion vessel. Drain outlet 1 F DELIVERY: TEE fitting with ø6 mm probe well. Flanged ball valve with non-return valve 18 mbar (the non-return valve can be bypassed by turning the handle by 45 ) provided with a temperature gauge holder (temperature gauge with red ring 0-120 C). Connecting pipe 3 Solar station Big Maverick DN 32 Max. flow rate 4,200 l/h Max. solar surface: 140 m 2 (Flat collector) 85 m 2 (Vacuum tube collector) Delivery tube control unit protective insulation Flow meter with 20 70 l/min scale Filling / Drainage / Cleaning and Disassembly of the pump not requiring emptying of the plant Compact safety unit with safety valve, pressure gauge and flexible connection for expansion tank Side hole for pump cooling Wall-/boiler flush mounting Flanged ball valves on delivery and return with integrated temperature gauge Insulation in black EPP 40 g/l Seals secured by flat fittings and gaskets. 8TBR00168 Solar station 2V - Stratos Para 25/1-8 - 5-42 l/min. - 1 1/4 M 875.14 8TBR00169 Solar station 2V - Stratos Para 25/1-8 - 20-70 l/min. - 1 1/4 M 875.14 8TBR00172 Solar station 2V - Stratos Para 25/1-8 - 5-42 l/min. - 1 1/2 M 887.05 8TBR00173 Solar station 2V - Stratos Para 25/1-8 - 20-70 l/min. - 1 1/2 M 887.05 8TLO00158 Solar station BIG MAVERICK VR-90 DN 32-20 / 70 l/min. 2,112.88 4646
SOLAR STATIONS DHW HEAT-EXCHANGER MODULES - WITH CONTROL UNIT 8TLO00131 - MINI EXOL AS1 DHW production module Electronic regulator 10 kw Max. Q: 36 l (m 2 /h) Max. surface: 20 m2 ΔT 12 C EPP insulation Size: 400 x 600 x 250 mm single load 8TLO00134 - MINI EXOL AS2 DHW production module Electronic regulator 10 kw Max. Q: 36 l (m 2 /h) Max. surface: 20 m2 ΔT 12 C EPP insulation Size: 400 x 600 x 250 mm double load 8TLO00137 - EXOL AS1 DHW production module Electronic regulator 36 kw Max. Q: 20 l (m 2 /h) Max. surface: 80 m 2 ΔT 20 C EPP insulation Size: 400 x 600 x 250 mm single load 8TLO00140 - EXOL AS2 DHW production module Electronic regulator 36 kw Max. Q: 20 l (m 2 /h) Max. surface: 80 m 2 ΔT 20 C EPP insulation Size: 475 x 835 x 226 mm double load 8TBR00286-288 DHW filling unit 1v Fully assembled compact unit for delivering heat produced by a solar system. Can be installed in combination with 1 buffer tank for domestic hot water (DHW) EPP insulation Box (Size: 576x585x190 mm). A special metal backplate secures the unit to the insulation and allows easy wall mounting. PN 10. T max. solar circuit: 120 C. T max. secondary circuit: 110 C. Application range: up to 35 kw For solar fields up to 70 m 2 3 8TLO00131 MINI EXOL AS1 DHW production module 2,776.04 8TLO00134 MINI EXOL AS2 DHW production module 2,776.04 8TLO00137 EXOL AS1 DHW production module 5,018.16 8TLO00140 EXOL AS2 DHW production module 2,663.18 8TBR00286 Filling unit 1-way 3/4 DHW from thermal solar 1 <25 kw (50m 2 ) 2,603.88 8TBR00288 Filling unit 1-way 3/4 DHW from thermal solar 1 <35 kw (70m 2 ) 3,144.50 8TBR00290 Kit of 2, 3/4 valves - 1-way storage filling unit 49.17 47
SOLAR HEAT EXCHANGER MODULES ON PUFFER SHC 10 - ZEOLITE ABSORBER FOR MINI EXOL AR1 Transfer module Electronic regulator 10 kw Max. Q: 36 l (m 2 /h) Max. surface: 20 m2 ΔT 12 C EPP insulation size: 400 x 600 x 250 mm single load MINI EXOL AR2 Transfer module Electronic regulator 10 kw Max. Q: 36 l (m 2 /h) Max. surface: 20 m2 ΔT 12 C EPP insulation size: 400 x 600 x 250 mm double load EXOL AR1 Transfer module Electronic regulator 36 kw Max. Q: 20 l (m 2 /h) Max. surface: 80 m 2 ΔT 20 C EPP insulation size: 400 x 600 x 250 mm single load EXOL AR2 Transfer module Electronic regulator 36 kw Max. Q: 20 l (m 2 /h) Max. surface: 80 m 2 ΔT 20 C EPP insulation size: 475 x 835 x 226 mm double load 3 Puffer filling unit 1V Fully assembled compact unit for delivering heat produced by a solar system. Can be installed in combination with 1 buffer tank (puffer) PN 10. T max. solar circuit: 120 C. T max. secondary circuit: 110 C. Application range: up to 35 kw For solar fields up to 70 m 2 Puffer filling unit 2V Fully assembled compact unit for delivering heat produced by a solar system. Fitted with a diverter valve positioned on the secondary circuit supply line and controlled directly by the control unit. PN 10. T max. solar circuit: 120 C. T max. secondary circuit 110 C. Application range: up to 35 kw For solar fields up to 70 m 2 8TLO00143 MINI EXOL AR1 Transfer modules 2,663.18 8TLO00146 MINI EXOL AR2 Transfer modules 2,906.15 8TLO00149 EXOL AR1 Transfer modules 4,723.18 8TLO00152 EXOL AR2 Transfer modules 5,140.52 8TBR00278 Filling unit 1-way Puffer 3/4 from thermal solar 1 <25 kw (50m 2 ) 2,794.50 8TBR00280 Filling unit 1-way Puffer 3/4 from thermal solar 1 <35 kw (70m 2 ) 3,356.43 8TBR00296 Filling unit 2-way Puffer 3/4 from thermal solar 1 <25 kw (50m 2 ) 3,057.53 8TBR00298 Filling unit 2-way Puffer 3/4 from thermal solar 1 <35 kw (70m 2 ) 3,585.21 8TBR00300 Kit of 3, 3/4 valves - 2-way storage filling unit 74.14 4848
SOLAR STATIONS SOLAR HEAT EXCHANGER MODULES - LARGE INSTALLATIONS 8TLO00155 BIG EXOL AR2 Pre-assembled solar heat transfer module to load storage tanks for hot water for heating and buffer storage tanks. A high performance steel plate heat exchanger transfers the solar circuit heat to the storage tank circuit. The BIG EXOL-AR2 is fitted with a diverter valve to control the double load and improve water stratification. The EXOL modules are controlled by an electronic control unit that provides RPM control (function 0-10V) of the primary circuit high efficiency circulator and so guarantees the best utilization of solar energy. MAIN FEATURES Electronic regulator 84 kw Max. Q: 30 l (m2/h) Max. surface: 200 m2 ΔT 12 C EPP insulation Size: 475 x 835 x 226 mm Double load Ethernet connector SD card reader PLUS / ADVANTAGES: Separation between the fluid in the solar circuit with series collectors and the fluid in the heating circuit. Tested and pre-assembled module, ready for use It combines the solar station and the exchange unit in the same product Tested hydraulic and electronic system allowing for quick commissioning It is possible to meter the thermal energy used for the production of water for heating Control unit with 40 selectable schemas It can be integrated with SD card for the data storage. Ethernet port for the remote control of the installation and indication of failure. Motorised 2-way ON/OFF valve, primary by-pass circuit, remains in closed position while the system is operating in solar function. When the temperature in the solar circuit (measured by the S5 probe) drops below 0 C, the valve opens closing the 2-way valve on the primary return circuit, avoiding the passage of the fluid inside the plate exchanger and also avoiding damages caused by ice. 3 8TLO00155 BIG EXOL AR2 Transfer modules 13,037.64 49
DRAIN BACK SOLAR STATIONS DRAIN BACK SOLAR STATION DN20 Pre-assembled solar station suitable for operating and controlling drain back thermal solar systems. Works with normal water, providing the following advantages: Better heat transfer Better heat capacity Reduced viscosity Lower pressure loss Reduced maintenance requirements Eco-friendly The Thermics drain back system is anyway a closed system, so it is not necessary to reintegrate the transfer fluid and there are no issues with corrosion. System composition: Solar control unit using the best safety and performance logic Temperature sensors Pre-installed and pre-wired pump Incorporated tank for collecting the transfer fluid when the pump stops Flow volume meter Pressure gauge Insulation 3 8TSO00042 Drain back solar module DN20 1,321.24 8TSO00043 Expansion tank 675.45 5050
2-WAY DRAIN BACK SOLAR STATION 2-Way solar module for drain back solar systems with high efficiency circulator and integrated control unit. RETURN: Flow meter-regulator with plant filling and draining valves. Wilo Yonos Para ST PWM high efficiency synchronous solar circulator. 3-Way flanged ball valve with temperature gauge holder (temperature gauge with blue ring 0 C-120 C). Side plug for additional connections DELIVERY: Compression ball valve with temperature gauge holder (temperature gauge with red ring 0 C-120 C) Connecting pipe 8TBR00182 Drain back 2V - Yonos Para ST 25/7.5-2-12 l/min. - 3/4 M - 2 relays, 3 probes 761.16 8TBR00183 Drain back 2V - Yonos Para ST 25/7.5-8-28 l/min. - 3/4 M - 2 relays, 3 probes 761.16 8TBR00185 Drain back 2V - Yonos Para ST 15/13-2-12 l/min. - 3/4 M - 2 relays, 3 probes 811.78 8TBR00186 Drain back 2V - Yonos Para ST 15/13-8-28 l/min. - 3/4 M - 2 relays, 3 probes 811.78 8TBR00188 Drain back 2V - Yonos Para ST 25/7.5-2-12 l/min. - 1 M - 2 relays, 3 probes 761.16 8TBR00189 Drain back 2V - Yonos Para ST 25/7.5-8-28 l/min. - 1 M - 2 relays, 3 probes 761.16 8TBR00191 Drain back 2V - Yonos Para ST 15/13-2-12 l/min. - 1 M - 2 relays, 3 probes 811.78 8TBR00192 Drain back 2V - Yonos Para ST 15/13-8-28 l/min. - 1 M - 2 relays, 3 probes 811.78 8TBR00194 Drain back 2V - Yonos Para ST 25/7.5-2-12 l/min. - 3/4 M - 3 relays, 3 probes 862.99 8TBR00195 Drain back 2V - Yonos Para ST 25/7.5-8-28 l/min. - 3/4 M - 3 relays, 3 probes 862.99 8TBR00197 Drain back 2V - Yonos Para ST 15/13-2-12 l/min. - 3/4 M - 3 relays, 3 probes 913.76 8TBR00198 Drain back 2V - Yonos Para ST 15/13-8-28 l/min. - 3/4 M - 3 relays, 3 probes 913.76 8TBR00200 Drain back 2V - Yonos Para ST 25/7.5-2-12 l/min. - 1 M - 3 relays, 3 probes 862.99 8TBR00201 Drain back 2V - Yonos Para ST 25/7.5-8-28 l/min. - 1 M - 3 relays, 3 probes 862.99 8TBR00203 Drain back 2V - Yonos Para ST 15/13-2-12 l/min. - 1 M - 3 relays, 3 probes 913.76 8TBR00204 Drain back 2V - Yonos Para ST 15/13-8-28 l/min. - 1 M - 3 relays, 3 probes 913.76 8TBR00210 Solar safety valve <50kW - 6 bar - 1/2 x 3/4 14.96 8TBR00212 Solar safety unit with pressure gauge <50kW - 6 bar - 3/4 48.98 8TBO00710 STAINLESS STEEL tank, 40 l, for Drain back module 345.00 3 51
INSTANTANEOUS DHW MODULES INSTANTANEOUS DHW PRODUCTION MODULES 8TLO00110 - T-FAST i20 Wilo - DHW production module Primary outlet maximum flow rate: 1,200 l/h Max. P: 6 bar DHW temperature setpoint: 40-55 C Circulator Wilo YONOS PARA ERP READY EPP insulation Size: 400 x 600 x 250 mm OPTION: DHW recirculation kit T-FAST i20 - i35 8TLO00116 - T-FAST i35 Wilo - DHW production module Primary outlet maximum flow rate: 1,700 l/h Max. P: 6 bar DHW temperature setpoint: 40-55 C Circulator Wilo YONOS PARA ERP READY EPP insulation Size: 400 x 600 x 250 mm OPTION: DHW recirculation kit T-FAST i20 - i35 3 8TLO00119 - DHW production module - T-FAST ie40 Wilo Max. P: 6 bar DHW temperature setpoint: 35-65 C Electronic control unit EPP insulation Size: 475 x 835 x 226 mm OPTION: DHW recirculation kit T-FAST ie40 8TLO00125 - DHW production module - T-FAST ie55 Wilo Max. P: 6 bar DHW temperature setpoint: 45-55 C Power supply: 230 V AC, 132 W Minimum flow rate for DHW production / ON: 5 +/- 0.3 l/ min. Size: 475 x 835 x 226 mm OPTION: DHW recirculation kit T-FAST ie55 8TLO00110 DHW production module - T-FAST i20 Wilo 1,714.85 8TLO00113 DHW recirculation kit T-FAST i20 - i35 338.58 8TLO00116 DHW production module - T-FAST i35 Wilo 1,934.30 8TLO00119 DHW production module - T-FAST ie40 Wilo 2,812.10 8TLO00122 DHW recirculation kit T-FAST Ie 40 339.06 8TLO00125 DHW production module - T-FAST ie55 Wilo 4,542.62 8TLO00128 DHW recirculation kit T-FAST ie 55 561.17 5252
DHW PRODUCTION MODULES 8TBR00311-319 - DHW Thermostatic production modules Applications: on buffer storage tanks (puffer) connected to traditional wood, pellet and biomass etc. heating systems in which layering is not fundamentally required. 8TBR00311 Production module DHW - thermostatic - 50 kw - < 20 l/min. 1,173.50 8TBR00313 Production module DHW - thermostatic - 100 kw - < 40 l/min. 1,423.69 8TBR00315 Set of 4 valves - Prod. modules DHW 74.56 8TBR00317 Production module DHW - thermostatic - 50 kw - < 20 l/min. - 4 valve 1,247.60 8TBR00319 Production module DHW - thermostatic - 100 kw - < 40 l/min. - 4 valve 1,497.73 8TBR00311-337 - Prod. module DHW electronic Applications: on buffer storage tanks (puffer) connected to traditional, heat pump, thermal solar and biomass heating systems. Ensures the instantaneous production of domestic hot water, while avoiding bacterial contamination such as legionella due to the stagnation of heated water. Its compact size also allows it to be easily installed on small tanks. 3 8TBR00321 Production module DHW - electronic - 50 kw - < 20 l/min. 1,131.04 8TBR00323 Production module DHW - electronic - 70 kw - < 30 l/min. 1,198.48 8TBR00325 Prod. module DHW - electronic. - 50 kw - < 20 l/min. + recirculation 1,222.44 8TBR00327 Prod. module DHW - electronic. - 70 kw - < 30 l/min. + recirculation 1,292.67 8TBR00329 Recirculation and pump set - Prod. modules DHW - electronic 214.32 8TBR00331 Prod. module DHW - electronic. - 50 kw - < 20 l/min. - 4 valve 1,205.08 8TBR00333 Prod. module DHW - electronic. - 70 kw - < 30 l/min. - 4 valve 1,272.54 8TBR00335 Prod. module DHW - electronic. - 50 kw - < 20 l/min. - 4 valve + recirc. 1,296.47 8TBR00337 Prod. module DHW - electronic. - 70 kw - < 30 l/min. - 4 valve + recirc. 1,366.72 53
8TBR00311-357 - Production mod. ACS electronic. temp. control. Applications: on buffer storage tanks or similar, connected solar thermal systems, wood, pellet and biomass boilers etc. Ensures the instantaneous production of domestic hot water while avoiding bacterial contamination, such as legionella, due to the stagnation of heated water. Monitoring and control of the tank integration source in order to maintain the minimum necessary storage temperature. Optimized control of the return temperature to the storage tank via the deviator valve (optional). 3 8TBR00341 Prod. module DHW - electronic. - temp. control - 50 kw - 1-20 l/min. 1,619.54 8TBR00343 Prod. module DHW - electronic. - temp. control - 100 kw - 2-40 l/min. 1,853.04 8TBR00345 Prod. module DHW - electronic. - temp. control - 50 kw - < -20 l/min. + recirc. 1,962.48 8TBR00347 Prod. module DHW - electronic. - temp. control - 100 kw - 2-40 l/min + recirc. 2,219.05 8TBR00349 Set of 5 valves - Prod. modules DHW - electronic with recirc. 87.72 8TBR00351 Prod. module DHW - electronic. - temp. control - 50 kw - 1-20 l/min. - 4 valve 1,693.58 8TBR00353 Prod. module DHW - electronic. - temp. control - 100 kw - 2-40 l/min. - 4 valve 1,927.08 8TBR00355 Prod. module DHW - electronic. - temp. control - 50 kw - 1-20 l/min. - 5 valve + recirc. 8TBR00357 Prod. module DHW - electronic. - temp. control - 100 kw - 2-40 l/min. - 5 valve + recirc. 2,050.22 2,306.79 5454
CONTROL SYSTEMS 8TSO00112 8TSO00113 8TSO00126 Digital solar control unit Deltasol BX 5sensor 4 relays SD VFS 4 relay outputs 7 probe inputs, two of which are for Grundfos Direct Sensors 2 PWM outputs for controlling and adjusting the speed of the high efficiency pumps Data logging to SD card Drain back option Thermostat function (timed) RESOL VBus Energy-saving power supply Digital solar control unit Deltasol BX Plus 8 probe inputs and 5 relay outputs Data logging, backups and firmware updates with an SD card Pre-programmed optional functions, e.g. drain back option, thermostat function, thermal disinfection Possibility to connect up to 2 expansion modules via the VBus RESOL 2 inputs for Grundfos Direct Sensors digital sensors 2 PWM outputs for the control and adjustment of the high energy efficiency pumps' speed Operation control based on VDI 2169 VBus menu for the configuration of remote displays Solar control unit DeltaSol MX - SD Intuitive menu and display of operational status High-contrast display 14 relay outputs 12 inputs for Pt1000, Pt500 or KTY temperature sensors Possibility to connect up to 5 expansion modules via the resol VBus (45 sensors and 39 relays in total) 2 inputs for Grundfos Direct Sensors digital and analogue sensors Data logging, backups and firmware updates with an SD card Drain back option 356.76 582.86 935.00 3 8TSO00122 8TSO00124 Digital solar control unit DeltaSol CS/4 - PWM - VFD Specifically designed for controlling high efficiency pumps 1 input for Grundfos Direct SensorTM VFD probes Thermal balance Commissioning menu 3 base systems to choose from (DeltaSol CS/4) Operational control Tube collector and thermal disinfection function (DeltaSol CS/4) Drain back option Switch between C and F DeltaSol CS Plus - PWM - VFD digital solar control unit Specifically designed for controlling high efficiency pumps Display of operational status of HE two-way pump (two-way DeltaSol CS Plus) Particularly suitable for installing in solar stations (two-way DeltaSol CS Plus) 2 PWM inputs for the pump signal (two-way DeltaSol CS Plus) Thermal balance Commissioning menu Choice of 10 base systems Operational control Optional thermal disinfection function Drain back option 218.88 277.25 55
3 8TSO00130 8TSO00132 8TSO00150 8TSO00300 DL2 Solar Datalogger System status display Efficiency control Fault detection Access to the installation data via Internet with VBus.net Export function for further data analysis using a spreadsheet Direct connection to computer or router for remote query DL3 Solar Datalogger Data collection and configuration of up to 6 VBus master devices Measurement and recording of temperature by means of integrated sensor inputs Sensor input 0(4)-20 ma BACnet functionality to send/receive data as per the BACnet protocol Configuration and reading of data of the control unit by means of the integrated web interface Data logging on SD card SD (supplied) Firmware update via the SD card or the internet WMZ solar calorimeter - 2500 l/h Inputs: 2 temperature probes Pt1000, 1 V40 Measurement precision: ± 0,3K Measurement area: -30...+150 C Power supply: 220... 240V~ Type of connection: Y Absorbed power: around 2 VA Data interface: VBus VBus current distribution: 35 ma Size: 172 x 110 x 46 mm Control and automatic filling kit - natural circulation Control of the fluid level in the solar boiler Control of the temperature in the solar boiler Control of level topping up by means of a supplied solenoid valve Control of auxiliary devices such as: - Solar recirculation pump - Motorised diverter valve 501.60 1,128.96 810.54 133.00 ACCESSORIES FOR HEAT METERS AND CONTROL UNITS 8TSO00160 Impulse flow meter V40-25 DN20 265.05 8TSO00172 Grundfos Direct Sensor RPS 0-10 bar 79.80 5656
HEAT EXCHANGERS HEAT EXCHANGERS FOR SWIMMING POOLS TUBE BUNDLE HEAT EXCHANGERS FOR SWIM- MING POOLS Available in cupronickel, titanium and stainless steel Rapid transfer to swimming pool up to 1050 kw, for efficient use of energy and therefore maximum savings Integrated 7 mm pockets for thermostats (on most models), to facilitate installation The tube bundle is removable for easy maintenance of the unit Solvent welded end caps which insert directly into the pool piping on 5113 and 5114 series heat exchanger models The units are also ideal for cooling pools in hotter climates using a refrigeration unit Titanium parts in contact with swimming pool water have a 10-year anti-corrosion warranty 3 8TSA00020 Heat exchanger Tube bundle for swimming pool 80Mc Ix BOILER 752.18 8TSA00025 Heat exchanger Tube bundle for swimming pool 120Mc Ix 1,159.70 8TSA00027 Heat exchanger Tube bundle for swimming pool 120Mc Ix SOL/HEAT PUMP 1,740.96 8TSA00029 Heat exchanger Tube bundle for swimming pool 170Mc Ix BOILER 1,828.00 8TSA00035 Heat exchanger Tube bundle for swimming pool 240Mc Ix 2,190.00 8TSA00050 Heat exchanger Tube bundle for swimming pool 80Mc Ti BOILER 1,139.00 8TSA00055 Heat exchanger Tube bundle for swimming pool 120Mc Ti 1,469.29 8TSA00057 Heat exchanger Tube bundle for swimming pool 120Mc Ti SOL/HEAT PUMP POA *other sizes available on request 57
INSPECTABLE PLATE HEAT EXCHANGERS PH2 HEAT EXCHANGERS PH series inspectable plate heat exchangers provide the highest level of heat transfer efficiency. They are composed of AISI 316 stainless-steel plates, all fitted with EPDM rubber gaskets and locked by galvanised steel tie rods, AISI 304 stainless-steel gates, with painted carbon-steel frame. Calculation, configuration and price on request Surface area in cm 2 Plate thickness Plate weight Frame weight Nominal pressure 340 0.6mm 320 g 22 kg 10 bar 1 1/4 340 0.6mm 320 g 27 kg 16 bar 1 1/4 S (mm) H (mm) L (mm) D (mm) C (mm) 15 480 180 370 65 3.1 20 480 180 370 65 3.1 Connection A (x no. plates) PH3 HEAT EXCHANGERS PH series inspectable plate heat exchangers provide the highest level of heat transfer efficiency. They are composed of AISI 316 stainless-steel plates, all fitted with EPDM rubber gaskets and locked by galvanised steel tie rods, AISI 304 stainless-steel gates, with painted carbon-steel frame. 3 Calculation, configuration and price on request Surface area in cm 2 Plate thickness Plate weight Frame weight Nominal pressure 1300 0.6mm 950 g 103 kg 10 bar 2 1300 0.6mm 950 g 124 kg 16 bar 2 S (mm) H (mm) L (mm) D (mm) C (mm) 25 750 350 605 145 3.5 30 750 350 605 145 3.5 Connection A (x no. plates) PH4 HEAT EXCHANGERS PH series inspectable plate heat exchangers provide the highest level of heat transfer efficiency. They are composed of AISI 316 stainless-steel plates, all fitted with EPDM rubber gaskets and locked by galvanised steel tie rods, AISI 304 stainless-steel gates, with painted carbon-steel frame. Calculation, configuration and price on request Surface area (cm 2 ) Plate thickness Plate weight Frame weight Nominal pressure Connection 2200 0.6mm 1400 g 320 kg 10 bar Flat flange UNI 2278-67 PN16 DN100 (4 pipe) S (mm) H (mm) L (mm) D (mm) C (mm) 40 1015 490 730 230 2.9 30 750 350 605 145 3.5 A (x no. plates) 5858
FLUIDS AND VALVES ANTIFREEZE LIQUIDS AND CLEANING FLUIDS ANTIFREEZE HEAT TRANSFER FLUIDS High-performance non-toxic propylene glycol based antifreeze liquid. Free of nitrates, amines and phosphates, silicates and borates, the liquid is combined with a protective combination of inhibitors to stop the formation of rust and corrosion of all materials present in a system such as steel, copper, aluminium and seals. It is ideal for protecting thermal solar, geothermal, low- and high-temperature heating, cooling and heat pump systems from freezing. Available in 15, 20 and 25 kg jerrycans. CODE PRODUCT PRICE ( /KG) 8TFU00010 Premixed diathermic fluid L -5 C CF 2.04 8TFU00011 8TFU00014 Premixed diathermic fluid L -10 C CF Premixed diathermic fluid L -20 C CF 3.12 4.14 8TFU00018 Premixed diathermic fluid L -28 C CF 4.68 8TFU00210 CF CONCENTRATED diathermic fluid 7.95 8TFU00310 Deionised water 0.46 8TFU00208 Concentrated propylene glycol antifreeze for natural circulation systems 5.12 3 CODE PRODUCT PRICE ( /KG) 8TFU00030 Premixed diathermic fluid HYBRID 5.56 SOLAR PANEL CLEANER Alkaline ph, the formula includes specific dispersants developed to eliminate deposits, sediments and organic sludge which can form in solar systems. This product restores optimum working conditions to the system, prolonging its life as well as significantly reducing maintenance or repair costs. Available in 5 kg jerrycans. CODE PRODUCT PRICE ( /KG) 8TFU00220 MySOLAR concentrated cleaning acid 40.76 59
MIXING/DIVERTER VALVES MIXING VALVES Thermostatic mixing valve keeps the temperature of the mixed water sent to the user constant at the set temperature when temperature and pressure of the hot and cold water supplied or flow rate drawn change. Also available in scald-proof version: hot water flow is inhibited in the event that the inlet cold water is not available. 8TKR00032 Solar thermostatic mixing valve - anti-scald 1/2 87.58 8TKR00033 Solar thermostatic mixing valve - anti-scald 3/4 77.98 8TKR00034 Thermostatic mixing valve for distribution 1" - Kv 3 235.29 THERMOSTATIC MIXING VALVES FOR LARGE PLANTS Adjustable thermostatic mixing valve for centralised solar plants. Body in dezincification resistant alloy CR. Male threaded connections. Internal thermoplastic anti-scale system. Max. working pressure: 14 bar. Max. inlet temperature: 100 C. 3 8TKR00036 Solar thermostatic mixing valve 1 1/4" - Kv 7.6 - large plants 731.17 8TKR00037 Solar thermostatic mixing valve 1 1/2" - Kv 11 - large plants 1,204.28 8TKR00038 Solar thermostatic mixing valve 2" - Kv 13.3 - large plants 1,382.35 DIVERTER VALVES Motorised diverter valve for automatically diverting heat transfer fluid in climate control and plumbing systems. Suitable for heating systems and domestic hot water production. 8TKR00050 Three-way diverter valve body 56.15 8TKR00051 Motorised 3-way diverter ball valve 3/4 179.55 8TKR00053 Motorised 3-way diverter ball valve 1 262.20 FLOW METERS Flow measurement instrument with adjustable flow limiter and level indicator to control operation in the return, resists up to 120 C, measurement range 3-22 l/ min. 8TKR00071 Analogue flow meter, 1-13 l/min, DN20 85.50 8TKR00072 Analogue flow meter, 8-30 l/min, DN25 99.75 8TKR00073 Solar flow meter 185 C - 1 MxM - 2-12 l/min 240.66 6060
EXPANSION VESSELS EXPANSION VESSELS SOLAR VESSEL Interchangeable membrane, resistant to peaks of 130 for short periods Screw-down stainless-steel flange 2.5 bar precharge Maximum pressure 10 bar 8TVE00010 SOL expansion vessel, 10bar, 25 litres 52.84 8TVE00011 SOL expansion vessel, 10bar, 40 litres 83.57 8TVE00012 SOL expansion vessel, 10bar, 50 litres 113.02 8TVE00013 SOL expansion vessel, 10bar, 80 litres 179.01 8TVE00014 SOL expansion vessel, 10bar, 100 litres 250.75 8TVE00015 SOL expansion vessel, 10bar, 150 litres 331.16 8TVE00016 SOL expansion vessel, 10bar, 200 litres 421.66 8TVE00020 SOL expansion vessel, 10bar, 300 litres 488.43 SOLAR PRE-TANK Capacity: 18 Lt Max pressure: 10 bar Connection: 3/4 Size: 270 x 450 mm 8TVE00036 Solar Pre-tank 18 l 35.99 8TVE00038 Solar Pre-tank 24 l 41.90 8TVE00040 Solar Pre-tank 35 l 157.76 3 DHW VESSEL Food-safe interchangeable membrane (50-litre model), resistant to 99 C Screw-down stainless-steel flange 2.5 bar precharge Maximum pressure 10 bar 8TVE00050 DHW expansion vessel, 5 litres 30.89 8TVE00051 DHW expansion vessel, 8 litres 32.76 8TVE00052 DHW expansion vessel, 12 litres 40.27 8TVE00053 DHW expansion vessel, 18 litres 46.48 8TVE00054 DHW expansion vessel, 25 litres 55.08 8TVE00057 DHW expansion vessel, 40 litres 70.47 8TVE00058 DHW expansion vessel, 60 litres 109.97 8TVE00064 DHW expansion vessel, 100 litres 181.04 8TVE00065 DHW expansion vessel, 150 litres 273.42 8TVE00067 DHW expansion vessel, 200 litres 322.57 61
HEATING VESSEL Interchangeable membrane (50-litre model), resistant to 99 C Screw-down galvanised flange 1.5 bar precharge Maximum pressure 6 bar 8TVE00110 HEAT. expansion vessel 18 l 36.86 8TVE00111 HEAT. expansion vessel 25 l 42.56 8TVE00112 HEAT. expansion vessel 35 l 80.95 8TVE00115 HEAT. expansion vessel 50 l 98.01 8TVE00118 HEAT. expansion vessel 80 l 131.22 8TVE00120 HEAT. expansion vessel 100 l 156.74 8TVE00130 HEAT. expansion vessel 300 l 362.07 3 8TVE00007 Expansion vessel Fx kit, 3/4 L1000 (for 18-24 - 25-35 litre vessels) 59.47 6262
VENTILATED DISSIPATORS SUMMER AIR-BASED DISSIPATORS FOR SOLAR INSTALLATIONS SMALL VENTILATED DISSIPATORS - TH SERIES Compact aluminium dissipators, complete with electric fan and painted metal duct, suitable for dissipating the excess power of solar installations into the atmosphere in summer. System to be installed in series or parallel with the storage boiler, on the solar circuit. DISSIPATED CODE MOD. SOLAR SYSTEM A B C D G IP ELEC. P POWER 8SAR01001 TH10 10kW Up to 15 m 2 300 350 163 63 1 IP 44 68 W 8SAR01002 TH15 12kW Up to 20 m 2 355 400 163 63 1 IP 44 68 W 8SAR01003 TH30 35kW Up to 60 m 2 451 500 163 63 1 IP 44 230 W 8SAR01004 TH45 43kW Up to 80 m 2 451 00 194 94 1 ¼ IP 44 230W 8SAR01005 TH45 ECO 40Kw Up to 100 m 2 466 620 205 94 1 ¼ IP 44 173W 3 8SAR01001 TH10 ventilated dissipator assembly 337.71 8SAR01002 TH15 ventilated dissipator assembly 400.01 8SAR01003 TH30 ventilated dissipator assembly 495.32 8SAR01004 TH45 ventilated dissipator assembly 580.08 8SAR01005 TH45-ECO ventilated dissipator assembly 706.70 63
VENTILATED DISSIPATORS CTH - VENTILATED DISSIPATORS FOR INDUSTRIAL INSTALLATIONS VENTILATED DISSIPATORS - CTH SERIES Compact aluminium dissipators, complete with electric fan and painted metal duct. Suitable for dissipating the excess power of solar plants into the atmosphere in Summer. System to be installed in series or parallel with the storage boiler, on the solar circuit. Body in microchannel aluminium Best heat-exchange coefficients in their category Differential with outside air as low as +2 C! Low water-side pressure losses (< 60 mbar) Excellent thermal expansion behaviour Low-power EBM EC fans Super-quiet versions available Easily cleaned air-side fins Also suitable for great dissipation 3 8TAC00035 DRY-COOLER CTH 32 4,050.00 8TAC00036 DRY-COOLER CTH 25 DIAM. 710 5,820.73 UNITS WITH DEDICATED SPECIFICATIONS DESIGNED ON REQUEST 6464
65 3
4 HEAT PUMPS 666
67 4
DHW HEAT PUMPS PTH - AIR-WATER HEAT PUMP PTH heat pumps use the thermal energy in the air to produce domestic hot water. The process is as effective and efficient as possible with average C.O.P. > 3. The energy savings from PTH heat pumps also provides environmental benefits, as most of the energy used comes from nature. Their ease of installation, quiet and reliable operation and very low maintenance requirements complete the advantages of this highly ecological and economical system. Easy to install Interior installation Economical Widely used Backed up by emergency electric element Heat pump unit on top of boiler Condenser outside boiler so as not to contaminate the DHW Solar coil included as standard Electronic control already wired and programmed for most common control scenarios Can be installed in any plant room No flue! No gas supply! The tank (275 litres) stores and maintains the heat for long periods, thanks to the 50 mm PU insulating jacket 4 PTH 300-0 coils PTH 300-1 coil PTH 300-2 coils 6868
PTH 300-0S PTH 300-1S PTH 300-2S A mm 1845 1845 1845 B mm 1410 1410 1410 C mm 1150 1150 1150 D mm - - 1060 E mm 965 965 965 F mm - - 890 G mm - 690 690 H mm - 255 255 I mm - 365 365 L mm 155 155 155 M mm 835 835 835 mm 1145 1145 1145 P mm 425 425 425 ØC mm 160 160 160 Ø mm 660 660 660 Shipping weight kg 112 127 145 4 8TBO00308 PTH 300-0 coils 2,420.04 8TBO00310 PTH 300-1 coil 2,532.60 8TBO00312 PTH 300-2 coils 2,664.90 69
DHW HEAT PUMPS THDC 270: SOLAR-ASSISTED HEAT PUMP COMPACT The THERMODYN-C system produces domestic hot water, using a heat pump and a state-of-the-art thermodynamic solar panel. The process occurs in the most effective and efficient manner, using the energy from solar radiation and the environmental heat energy for the most part. Easy to install, safe, silent and reliable operation, little maintenance are the additional advantages of this highly ecofriendly and cost saving system. TECHNOLOGICAL ADVANTAGES Thermodynamic panel in anodised aluminium with anode oxide finish Steel tank with internal treatment according to Standards DIN 4753-3 and UNI 10025 Condenser outside boiler, scale and gas/water contamination free Integrated NTC sensor to check water temperature Electrical resistance 1.5 kw 230V integrated in the front flange Automatic activation of resistance/boiler at temperatures not suitable for the heat pump Anti-corrosion Magnesium anode Electronic anode available as accessory Hydraulic fittings arranged in the rear Thick PU heat insulation External cover in ABS grey RAL7001 Adjustable support feet Eco gas R134a Safety devices for high pressure 4 THDC - 0 coils THDC - 1 coil 7070
THDC 270: SOLAR-ASSISTED HEAT PUMP COMPACT THDC 270-0S THDC 270-1S A 1745 mm 1745 mm B 1410 mm 1410 mm C 1150 mm 1150 mm Ø 660 mm 660 mm 100 kg 107 kg MODEL THDC 270-0S THDC 270-1S BOILER Capacity Litres 273 268 Coil surface area m 2 / 1.5 Maximum boiler working pressure bar 6 6 Maximum working pressure, auxiliary coil bar 10 10 HEAT PUMP UNIT Electrical power supply V/Ph/Hz 230/1/50 Max water temperature C 60 Heating element thermal power W 1500 Thermal power output (50 - average) W 1700 / 2500 Power draw (average) W 395-550 Refrigerant type / g R134A / 1050 Max. tube length m 8 THERMODYNAMIC PANEL Shipping weight kg 7.3 Size mm 1800 x 800 x 20 Extraction line connection Liquid line connection 3/8 SAE FLARE 1/4 SAE FLARE 4 8TAC00230 Thermodyn system 270 1P 2,970.00 8TAC00234 Thermodyn system 270 2P 3,490.00 8TAC00240 Thermodyn system 270 1C 1P 3,193.00 8TAC00244 Thermodyn system 270 1C 2P 3,605.00 71
DHW HEAT PUMPS AIR&SUN BOX Air&Sun Box domestic hot water production unit, wall mounted on brackets provided, split evaporator, plate condenser with integrated circulator, variable speed electronic centrifugal fan with settable parameters, programmable controller. Thermodynamic panel made of aluminium, doubleside printed (roll-bond technology) with anodized surface. HEAT PUMP UNIT: Energy efficiency class A (XL Load profile and direct DHW heating) Power supply: V/Ph/Hz 230/1/50 Max. water temperature: 60 C Min. operating air temperature: -5 C Max. operating air temperature: 40 C Thermal power output (50 - average): 2200 W Power draw (average) 450 W Refrigerant: R134A / 410 g Max. tube length: 7m Circulator: electronic Nominal flow rate 0.6 m 3 /h Weight: 21 kg Application: wall mounted THERMODYNAMIC PANEL: Transport weight 7.3 kg Size: 1800 x 800 x 20 Extraction line connection 3/8 SAE FLARE Liquid line connection 1/4 SAE FLARE 4 8TAC00331 Air&Sun Box - 1.5 kw - 1P 2,353.04 8TAC00391 Water Box - 1.5 kw - 1P 2,318.80 6TAC01015 Thermodynamic panel C 356.25 7272
AIR-WATER HEAT PUMPS PAW - ECO: MONOBLOC AIR-WATER HEAT PUMP - ON/OFF Outdoor Air-water Electric Heat Pump A compact version of the latest series of air-water heat pumps for outside installation, with a cuttingedge design and high COP at an unbeatable price. Compact unit Internal switch RVS21 + AVS55 adjustment Circulation pump Control panel/ thermostat External sensor External installation Pre-painted steel case Max. temperature up to 55 C Guaranteed to work down to -20 C Extremely quiet axial fans Control unit manages heating and DHW Suitable for radiant heating systems or fan coils Wired or wireless control Included as standard: 1. Remote control display 2. Five metre standard cable 3. Siemens base RVS41 control unit MODEL PAW-ECO08 PAW-ECO15 Output / Input / COP kwt / kwe / COP kwt / kwe / COP HEATING MODES A7/W35 8.8 / 2.0 / 4.4 13.2 / 3.0 / 4.4 A2/W35 7.6 / 2.0 / 3.8 11.5 / 3.0 / 3.8 A7/W45 8.4 / 2.4 / 3.5 13.0 / 3.7 / 3.5 A2/W45 7.4 / 2.4 / 3.1 11.4 / 3.7 / 3.1 4 8TAC00053 Heat pump PAW-ECO8 55 - H 230V 7,471.84 8TAC00066 Heat pump PAW-ECO15 55 - H 230V 7,834.56 8TAC00052 Heat pump PAW-ECO8 55 - H 400V 7,471.84 8TAC00062 Heat pump PAW-ECO15 55 - H 400V 7,884.56 73
PAW - 2 ECO: MONOBLOC AIR-WATER HEAT PUMP - ON/OFF Outdoor Air-Water Electric Heat Pump A compact version of the latest series of air-water heat pumps for outside installation, with a cutting-edge design and high COP at an unbeatable price. Internal switch Control panel/ thermostat RVS21 + AVS55 adjustment Circulation pump External sensor MODEL PAW-2ECO 10 PAW-2ECO15 PAW-2ECO20 PAW-2ECO25 Output / Input / COP kwt / kwe / COP kwt / kwe / COP kwt / kwe / COP kwt / kwe / COP HEATING MODES A7/W35 11.34/2.68/4.23 13.60/3.10/ 4.45 19.6/4.4/4.45 27.9/6.3/4.4 A2/W35 8.71 / 2.61 / 3.33 10.70/3.05/3.51 15.4/4.39/3.51 21.9/6.2/3.5 TECHNICAL SPECIFICATIONS Air temperature limits -20 C to 35 C Water temperature limits 20 C to 65 C Heating connections 5/4 5/4 5/4 5/4 Heating water min. flow 1.95 2.34 3.4 - Heating pressure loss < 16 kpa < 16 kpa < 16 kpa - Air flow 4 500 m 3 /h 4 500 m 3 /h 4 500 m 3 /h 7 000 m 3 /h 4 8TAC00151 Heat pump PAW-2ECO10 EVI - H 230V 10,697.40 8TAC00161 Heat pump PAW-2ECO15 EVI - H 230V 11,288.16 8TAC00150 Heat pump PAW-2ECO10 EVI - H 400V 10,697.40 8TAC00160 Heat pump PAW-2ECO15 EVI - H 400V 11,288.16 8TAC00170 Heat pump PAW-2ECO20 EVI - H 400V 11,987.64 8TAC00180 Heat pump PAW-2ECO25 EVI - H 400V 14,750.72 6TAC00342 Cold/Hot option - PAW-2ECO 864.00 7474
AIR-WATER HEAT PUMPS HYDRA: INVERTER HEAT PUMP HYDRA - Split air-water heat pump, hot/cold Galvanized and painted vertical steel structure; low noise emission and variable power level with twin rotary inverter compressor and Freon R410a. High efficiency with integrated management of the circulator and high temperature hot water production with a three-way diverter valve on the boiler and with the option to use an emergency electric heater. HYDRA 6 kw HYDRA 9 kw HYDRA 14 kw Operating conditions Input / Output / COP (Hz) Input / Output / COP (Hz) Input / Output / COP (Hz) A-5 / W35 0.9 / 2.8 / 3.1 (60 Hz) 0.8 / 2.2 / 2.7 (30 Hz) 1.6 / 4.7 / 2.9 (60 Hz) 2.3 / 6.6 / 2.8 (80 Hz) A2 / W35 1.0 / 3.3 / 3.3 (60 Hz) 0.8 / 2.7 / 3.37 (30 Hz) 1.6 / 5.8 / 3.6 (60 Hz) 2.3 / 8.0 / 3.4 (80 Hz) A7 / W35 1.0 / 3.9 / 3.9 (60 Hz) 0.8 / 3.3 / 4.0 (30 Hz) 1.7 / 7.0 / 4.1 (60 Hz) 2.4 / 9.6 / 4.0 (80 Hz) A12 / W35 1.0 / 4.8 / 4.8 (60 Hz) 0.8 / 4.0 / 5.0 (30 Hz) 1.6 / 8.4 / 5.2 (60 Hz) 2.4 / 11.2 / 4.6 (80Hz) A-5 / W50 1.2 / 2.4 / 2.0 (60 Hz) 1.0 / 1.8 / 1.8 (30 Hz) 2.0 / 3.9 / 1.9 (60 Hz) 2.9 / 5.2 / 1.8 (80 Hz) A2 / W50 1.3 / 2.7 / 2.1 (60 Hz) 1.1 / 2.2 / 2.0 (30 Hz) 1.6 / 4.7 / 2.6 (60 Hz) 3.0 / 6.5 / 2.1 (80Hz) A7 / W50 1.4 / 3.3 / 2.3 (60 Hz) 1.1 / 2.7 / 2.4 (30 Hz) 2.2 / 5.8 / 2.6 (60 Hz) 3.2 / 8.0 / 2.5 (80 Hz) A12 / W50 1.4 / 4.0 / 2.8 (60 Hz) 1.1 / 3.2 / 2.9 (30 Hz) 2.3 / 7.0 / 3.0 (60 Hz) 3.2 / 9.6 / 3.0 (80Hz) 1.9 / 3.5 / 1.8 (32 Hz) 2.9 / 8.7 / 3.0 (60 Hz) 4.9 / 12.4 / 2.5 (90 Hz) 1.5 / 5.3 / 3.5 (32 Hz) 3.0 / 10.7 / 3.5 (60 Hz) 5.1 / 16.4 / 3.2 (90 Hz) 1.5 / 6.6 / 4.2 (32 Hz) 3.1 / 13.0 / 4.2 (60 Hz) 5.2 / 19.7 / 3.8 (90 Hz) 1.5 / 8.0 / 5.3 (32 Hz) 3.1 / 15.7 / 5.0 (60 Hz) 5.3 / 23.5 / 4.4 (90 Hz) 1.9 / 3.5 / 1.8 (32 Hz) 3.8 / 7.2 / 1.9 (60 Hz) 6.3 / 10.6 / 1.7 (90 Hz) 2.0 / 4.3 / 2.1 (32 Hz) 3.9 / 8.7 / 2.2 (60 Hz) 6.6 / 13.0 / 2.0 (90 Hz) 2.1 / 5.2 / 2.4 (32 Hz) 4.0 / 10.5 / 2.6 (60 Hz) 6.8 / 15.9 / 2.3 (90 Hz) 2.1 / 6.3 / 3.0 (32 Hz) 4.2 / 12.7 / 3.0 (60 Hz) 7.0 / 19.2 / 2.7 (90Hz) Operating limits 15 rps - 120 rps 15 rps - 100 rps Refrigerant R410a 4 75
HYDRA - 2 TUBE VERSION HYDRA - 4 TUBE VERSION HYDRA - 2 TUBE SPLIT VERSION HYDRA - 4 TUBE SPLIT VERSION 4 8TAC00520 HYDRA heat pump - 6 kw - inverter - 230 - H/C 5,549.00 8TAC00522 HYDRA heat pump - 6 kw 4T - inverter - 230 - H/C 6,727.00 8TAC00524 HYDRA heat pump - 6 kw SPLIT - inverter - 230 - H/C 6,355.00 8TAC00526 HYDRA heat pump - 6 kw 4T SPLIT - inverter - 230 - H/C 7,595.00 8TAC00530 HYDRA heat pump - 9 kw - inverter - 230 - H/C 6,565.60 8TAC00532 HYDRA heat pump - 9 kw 4T - inverter - 230 - H/C 7,782.50 8TAC00534 HYDRA heat pump - 9 kw SPLIT - inverter - 230 - H/C 7,301.40 8TAC00536 HYDRA heat pump - 9 kw 4T SPLIT - inverter - 230 - H/C 8,546.60 8TAC00540 HYDRA heat pump - 14 kw - inverter - 400 - H/C 8,433.40 8TAC00542 HYDRA heat pump - 14 kw 4T - inverter - 400 - H/C 9,820.10 8TAC00544 HYDRA heat pump - 14 kw SPLIT - inverter - 400 - H/C 9,197.50 8TAC00546 HYDRA heat pump - 14 kw 4T SPLIT - inverter - 400 - H/C 10,555.90 7676
AIR-WATER HEAT PUMPS PAW Air-water heat pump series in a compact version for outdoor installation, with a cutting-edge design and high COP at an unbeatable price. Internal switch Control panel/ thermostat RVS21 + AVS55 adjustment External sensor MODEL PAW 8 EVI PAW 11 EVI PAW 15 EVI Output / Input / COP kwt / kwe / COP kwt / kwe / COP kwt / kwe / COP HEATING MODES A7/W35 7.60 / 2.00 / 3.80 10.02 / 2.62 / 3.82 13.20 / 3.47 / 3.80 A2/W35 6.60 / 2.00 / 3.30 8.34 / 2.52 / 3.31 10.60 / 3.31 / 3.20 A7/W45 8.4 / 2.4 / 3.5 11.3 / 3.2 / 3.5 13.0 / 3.7 / 3.5 A2/W45 7.4 / 2.4 / 3.1 9.9 / 3.2 / 3.1 11.4 / 3.7 / 3.1 4 8TAC00054 Heat pump PAW8 - EVI 65 - H - 230V 10,184.00 8TAC00058 Heat pump PAW11 - EVI 65 - H - 230V 10,778.40 8TAC00064 Heat pump PAW-15 - EVI - 230V 11,545.20 8TAC00051 Heat pump PAW8 - EVI 65 - H - 400V 10,184.00 8TAC00057 Heat pump PAW11 - EVI 65 - H - 400V 10,778.40 8TAC00063 Heat pump PAW-15 - EVI - 400V 11,545.20 6TAC00345 Cold/Hot option - PAW 8/15 777.60 77
HYDROBOX HYDROBOX Hot water tank divided into a section for DHW and a section for water for heating. Metal casing containing a stainless steel plate heat exchanger, integrated centrifugal pumps (apart from the pumps for the heating circuit) and control unit. Unit more easy to install and compact in relation to a heat pump. Advantages Possibility to set different contents for DHW and heating, according to the customer requirements Easy and quick installation Compact unit Easy maintenance 6TAC00440 Hydrobox - PAWECO - HC 2,401.28 6TAC00445 Hydrobox - PAWECO - HCS + Outside source 2,674.64 4 6TAC00450 Hydrobox - PAWECO - HCS + Elect. heat. 3,173.12 8TBO00381 Hydrobox 300 l - 220 l DHW and 80 l water for heating 4,301.10 8TBO00384 Hydrobox 500 l - 380 l DHW and 120 l water for heating 4,722.30 7878
AIR-WATER HEAT PUMPS PAW - S: SPLIT AIR-WATER HEAT PUMP - ON/OFF Internal switch RVS21 + AVS55 adjustment On-board control panel External sensor PAW - Outdoor Air-Water Electric Heat Pump. The latest air-water heat pump series in a compact version for outside installation, with a cutting-edge design and high COP at an unbeatableprice. Compact unit External installation Stainless-steel case Maximum temperature up to 55 C Max. temp. with EVI version up to 65 C Air-conditioning option Guaranteed to work down to -25 C Extremely quiet axial fans Control unit to manage heating and DHW Suitable for underfloor systems or radiators MODEL PAW-S27 - EVI PAW-S35 - EVI PAW-S50 Output / Input / COP kwt / kwe / COP kwt / kwe / COP kwt / kwe / COP A7/W35 27.9 / 6.3 / 4.4 28.8 / 6.56 / 4.4 40.7 / 9.3 / 4.4 A2/W35 21.9 / 6.24 / 3.51 25.1 / 6.57 / 3.8 35.4 / 9.3 / 3.8 A7/W45-27.2 / 7.7 / 3.5 38.9 / 11.1 / 3.5 A2/W45-16.0 / 5.2 / 3.1 34.1 / 11.1 / 3.1 4 8TAC00275 Heat pump PAW-S27 65 - H 400V 14,750.72 8TAC00280 Heat pump PAW-S35 65 - H 400V 18,789.48 8TAC00285 Heat pump PAW-S50 55 - H 400V 23,921.68 79
CALDENSA: SPLIT DIRECT CONDENSATION HEAT PUMP - ON/OFF Direct condensation heat pump with Siemens control unit able to supply hot water at up to 65 C even at -10 C outside temperatures thanks to Scroll EVI vapour injection compressors. Works with outside air temperatures as low as -20 C External compressor means no inside noise Long-life compressors Optimised COP without inverter losses COP of 4.4 with A7/W35 Improved defrosting thanks to the direct heat mass of the puffer Very simple hydraulic connection No pump or other complicated system components. Combined with 500-litre condensing puffer suitable for connection to existing radiator, underfloor and fan coil heating systems. Condensing puffer can be integrated with various auxiliary energy sources such as stoves and boilers. 4 MODEL CAL 10 CAL 15 CAL 20 CAL 25 Output / Input / COP kwt / kwe / COP kwt / kwe / COP kwt / kwe / COP kwt / kwe / COP HEATING MODES A-7/W35 8.8/2.8/3.14 10.9/3.4/3.21 15/4.4/3.41 18.1 / 6.1 / 3.1 A2/W35 10.7/2.8/3.82 13.2/3.4/3.88 18.3/4.4/4.16 21.9 / 6.2 / 3.5 A7/W35 12/2.8/4.29 14.4/3.4/4.24 19.8/4.4/4.5 27.9 / 6.3 / 4.4 COOLING MODES (OPTIONAL) A35 / W7 8.5 / 3.4 / 2.5 10.2 / 4.2 / 2.4 14 / 5.8 / 2.4 - TECHNICAL SPECIFICATIONS Air temperature limits -20 C / +35 C -20 C / +35 C -20 C / +35 C -20 C / +35 C Water temperature limits 10 C / 65 C 10 C / 65 C 10 C / 65 C 20 C / 65 C Air flow rate 3 500 m 3 /h 4 500 m 3 /h 5 000 m 3 /h 7 000 m 3 /h REFRIGERATION CIRCUIT Refrigerant R407C R407C R407C R407C Oil 1 700 ml POE 1700 ml POE 1700 ml POE 2800 ml POE Defrosting Automatic Automatic Automatic Automatic Condensate antifreeze protection yes yes yes yes Low-pressure switch 0.05 MPa 0.05 MPa 0.05 MPa 0.05 MPa High-pressure switch 3.2 MPa 3.2 MPa 3.2 MPa 3.2 MPa PHYSICAL CHARACTERISTICS H x W x L [mm] 1210 x 500 x 1270 1210 x 500 x 1270 1210 x 500 x 1270 1410 x 500 x 1500 Weight 150 kg 150 kg 150 kg 210 kg Mounting Outdoor, exposed Casing Powder coating Protection ( EN 60 529) IP43 ELECTRICAL CONNECTIONS Electrical data 400V 3N 50Hz 400V 3N 50Hz 400V 3N 50Hz 400V 3N 50Hz Compressor scroll EVI scroll EVI scroll EVI scroll EVI Rated current [A] 5 7 9 14 Maximum current [A] 8.4 9.5 13.5 18 Soft starter [A] - 33 37 - Compressor cable (n x mm2) 5x2.5 5x1.5 5x2.5 5x4 8080
CALDENSA H - heating only 8TSI00310 CALDENSA system - 10kW - H - 230V 10,490.81 8TSI00311 CALDENSA system - 10kW - H - 400V 10,490.81 8TSI00315 CALDENSA system - 15KW - H - 230V 11,391.82 8TSI00316 CALDENSA system - 15kW - H - 400V 11,391.82 8TSI00320 CALDENSA system - 20kW - H - 600 l - 400V 12,374.32 8TSI00331 CALDENSA system - 25KW - H - 1000 l - 400V 17,442.30 CALDENSA HC - Hot and Cold 4 8TSI00340 CALDENSA system - 10kW - HC - 230V 10,764.82 8TSI00341 CALDENSA system - 10kW - HC - 400V 10,764.82 8TSI00345 CALDENSA system - 15kW - HC - 230V 11,598.94 8TSI00346 CALDENSA system - 15kW - HC - 400V 11,598.94 8TSI00350 CALDENSA system - 20kW - HC - 600 l - 400V 12,603.47 8TSI00358 CALDENSA system - 25kW - HC - 1000 l - 400V 18,088.90 81
AIR-WATER HEAT PUMPS CALDENSA HS - Heating and DHW 8TSI00360 CALDENSA system - 10kW - HS - 230V 12,205.65 8TSI00361 CALDENSA system - 10kW - HS - 400V 12,205.65 8TSI00365 CALDENSA system - 15kW - HS - 230V 12,798.45 8TSI00366 CALDENSA system - 15kW - HS - 400V 12,798.45 8TSI00370 CALDENSA system - 20kW - HS - 600 l - 400V 13,944.01 8TSI00372 CALDENSA system - 20kW - HS - 825 l - 400V 15,824.28 8TSI00376 CALDENSA system - 25kW - HS - 1000 l - 400V 19,141.20 CALDENSA HCS - Heating, conditioning and DHW 4 8TSI00380 CALDENSA system - 10kW - HCS - 230V 13,584.34 8TSI00381 CALDENSA system - 10kW - HCS - 400V 13,584.34 8TSI00385 CALDENSA system - 15kW - HCS - 230V 14,469.73 8TSI00386 CALDENSA system - 15kW - HCS - 400V 14,469.73 8TSI00390 CALDENSA system - 20kW - HCS - 600 l - 230V 15,703.41 8TSI00395 CALDENSA system - 25kW - HCS - 1000 l - 400V 21,591.02 8282
CALDENSA SOLAR * solar collectors and solar station not included in the system (indicated in drawing only as an example) 8TSI00410 CALDENSA SOLAR system - 10kW - HS - 230V 12,832.90 8TSI00411 CALDENSA SOLAR system - 10kW - HS - 400V 12,832.90 8TSI00415 CALDENSA SOLAR system - 15kW - HS - 230V 13,425.70 8TSI00416 CALDENSA SOLAR system - 15kW - HS - 400V 13,425.70 8TSI00420 CALDENSA SOLAR system - 20kW - HS - 600 l - 400V 14,571.78 8TSI00428 CALDENSA SOLAR system - 25kW - HS - 1000 l - 400V 20,060.82 4 83
WATER-WATER HEAT PUMPS PWW: INDOOR ELECTRIC HEAT PUMPS - ON/OFF COMPACT WATER-WATER HEAT PUMPS Interior installation Powder coated sheet metal casing Corrosion protection Maximum temperatures up to 55 C, with R134 up to 75 C. Support for passive cooling Heat sources: ground source geothermal probe, borehole or horizontal collector Control unit to manage heating and DHW Suitable for underfloor systems or radiators Small footprint (0.35 m 2 ) Included as standard: 1. Electrical wiring unit 2. Siemens base RVS41 control unit DESCRIPTION PWW 5 PWW 10 PWW 15 PWW 20 PWW 33 PWW 50 Thermal power output / COP at B0/ W35 Thermal power output / COP a W10/ W35 5.47 / 1.23 / 4.43 7.26 / 1.29 / 5.61 9.93 / 2.24 / 4.43 12.97 / 2.30 / 5.64 12.40 / 2.67 / 4.65 16.20 / 2.76 / 5.86 16.50 / 3.55 / 4.64 21.50 / 3.67 / 5.85 32.0 / 6.96 / 4.6 44.0 / 6.86 / 6.4 Connection to heating system 1 (3/4 ) 2 Max. water outlet temp. from +15 C to +55 C / from +12 C to 75 C (R134A) Electrical power supply 400V / 3 / 50Hz (optional 230V) 400V / 3 / 50Hz 44.62 / 10.05 / 4.44 60.04 / 10.54 / 5.7 8TAC00077 Heat pump PWW5-55 - H - 230V 6,698.00 8TAC00081 Heat pump PWW9-55 - H - 230V 6,860.80 4 8TAC00082 Heat pump PWW10-55 - H - 230V 8,040.00 8TAC00084 Heat pump PWW15-55 - H - 230V 8,640.00 8TAC00078 Heat pump PWW5-55 - H - 400V 6,968.00 8TAC00080 Heat pump PWW10-55 - H - 400V 8,040.00 8TAC00083 Heat pump PWW15-55 - H - 400V 8,640.00 8TAC00090 Heat pump PWW20-55 - H - 400V 9,460.40 8TAC00095 Heat pump PWW33-55 - H - 400V 14,316.56 8TAC00100 Heat pump PWW50-55 - H - 400V 19,290.64 8TAC00105 Heat pump PWW100-55 - H - 400V 31,838.40 6TAC00365 Cold/Hot option - PWW up to 16 540.00 6TAC00370 Cold/Hot option - PWW 20 621.00 6TAC00375 Cold/Hot option - PWW 33/50 702.00 8484
WATER-WATER HEAT PUMPS POSEIDON POSEIDON - water-water heat pumps, hot/cold version Available in 8 kw, 14 kw and 18 kw versions May be fitted with a single or twin compressor Refrigerant R410a or R134a Buffer tank / hydraulic separator Electronic circulator, borehole side Programmable controller Colour touch-screen terminal DESCRIPTION POSEIDON 8 POSEIDON 14 POSEIDON 18 Thermal power output at W-5/W55 7.1 12.4 16 Thermal power output / COP at W0/W35 8.4 / 4.4 14.7 / 4.5 18.9 / 4.6 Thermal power output / COP at W10/W35 11.7 / 5.7 20.5 / 5.9 26.3 / 6.1 Thermal power output at W-5/W45 6.8 11.9 15.3 Thermal power output / COP at W0/W45 8.0 / 3.7 14.0 / 3.9 18.0 / 4.0 Thermal power output / COP at W10/W45 11.0 / 4.8 19.3 / 5.0 24.8 / 5.2 Thermal power output at W-5/W55 6.6 11.6 14.9 Thermal power output / COP at W0/W55 7.6 / 3.3 13.3 / 3.4 17.1 / 3.4 Thermal power output / COP at W10/W55 10.4 / 3.9 18.2 / 4.1 23.4 / 4.3 6TAC00478CODICE PRODUCT PRICE ( ) 8TAC00411 Poseidon 8 - HC - R410a 8,512.00 8TAC00413 Poseidon 8 - HC - R134a 9,156.00 8TAC00415 Poseidon 14 - HC - R410a 10,304.00 8TAC00417 Poseidon 14 - HC - R134a 10,976.00 8TAC00419 Poseidon 18 - HC - R410a 12,292.00 8TAC00421 Poseidon 18 - HC - R134a 13,272.00 6TAC00470 Desuperheater Poseidon 8 1,168.50 6TAC00472 Second circulator Poseidon 8 427.50 6TAC00474 Desuperheater Poseidon 14 1,254.00 6TAC00476 Desuperheater Poseidon 18 1,368.00 4 85
HEAT ACTUATED HEAT PUMPS SHC 10 - ZEOLITE ABSORBER FOR LOW TEMPERATURES Compact heat powered heat pump for interior air conditioning and heating. Absorption cooling with particularly low working temperatures, easy to install and use. SHC devices reach around 100% of their rated capacity at a working temperature of 65 C. They are suitable for outside temperatures up to around 35 C. The nominal output of the SHC 10 is 10 kw. The compact design allows for space-saving installation for easy assembly; all hydraulic fittings are easily accessible on the top of the machine. Unit optimised for pallet truck handling. Refrigerant: water Absorbent material: Zeolite salts TECHNICAL SPECIFICATIONS Length 1100 mm Height 1370 mm Width 750 mm Weight of SHC 10 390 kg Weight of SHC 10-FC (Free Cooling) 395 kg Fitting position From ground 1400 mm Nominal connection size Thermal supply (2x) G 1 Cooling (2x) G 1 1/4 Dissipation (2x) G 1 1/2 4 The heat pump works with a heat supply, permissible temperatures 55-100 C. The machine's electricity consumption is just 20W. The machine includes electronic circulators for the flow to the conditioning system, the external cooling system and the thermal supply system to facilitate installation and commissioning, as well as to minimise electricity consumption. SHC devices are suitable for combination with the following heat supplies: Thermal solar field Micro cogeneration Industrial waste heat 8TAC00027 SHC 10 absorption heat pump - external pumps 26,639.20 8TAC00025 SHC 10 absorption heat pump - integrated pumps 35,268.80 8TAC00030 SHC 10 absorption heat pump - integrated + free cooling pumps 37,144.80 8TAC00026 SHC 10 absorption heat pump and - integrated pumps 35,268.80 8TAC00031 SHC 10 absorption heat pump and - integrated + free cooling pumps 37,144.80 8686
HEAT ACTUATED HEAT PUMPS LOW TEMPERATURES SHC 18 - ZEOLITE ABSORBER FOR HIGH TEMPERATURES Compact heat powered heat pump for interior air conditioning and heating. With integrated hydraulic unit, it is particularly easy to install, providing space savings. It can be used efficiently with dry ventilated dissipators with outside temperature up to 40 C. It reaches its optimum capacity at supply temperatures of 85 C. The rated capacity of the SHC 18 is 18 kw. For easy installation, all hydraulic connections are easily accessible on the top of the machine. Unit optimised for pallet truck handling. Refrigerant: water Absorbent material: Zeolite salts TECHNICAL SPECIFICATIONS Length 1100 mm Height 1370 mm Width 750 mm Weight of SHC 18 420 kg Weight of SHC 18-FC (Free Cooling) 425 kg Fitting position From ground 1,400 mm Nominal connection size Thermal supply (2x) G 1 1/4 Cooling (2x) G 1 1/2 Dissipation (2x) G 1 1/2 The heat pump works with a heat supply, permissible temperatures 65-100 C. The machine's electricity consumption is just 20W. The machine includes electronic circulators for the flow to the conditioning system, the external cooling system and the thermal supply system to facilitate installation and commissioning, as well as to minimise electricity consumption. SHC devices are suitable for combination with the following heat supplies: Thermal solar field Micro cogeneration Industrial waste heat 4 8TAC00017 SHC 18 absorption heat pump - external pumps 38,860.00 8TAC00015 SHC 18 absorption heat pump - integrated pumps 51,027.20 8TAC00020 SHC 18 absorption heat pump - integrated + free cooling pumps 52,903.20 Size 30 available to order 87
HEAT PUMP ACCESSORIES COMMON HEAT PUMP ACCESSORIES 6TAC00280 Web server - OZW672.01 692.90 6TAC00282 Web server - OZW672.04 1,133.64 6TAC00285 Web server - OZW672.16 1,511.52 6TAC00320 Service case - 0CI700 723.60 4 888
89 4
5 SYSTEMS 9090
91 5
NATURAL - VACUUM CIRCULATION SOLAR SYSTEMS SKYPOWER: VACUUM DHW SOLAR SYSTEM SKYPOWER Natural circulation solar system, composed of high-efficiency vacuum tubes collector, Puffer solar boiler for instantaneous production of domestic hot water via a copper heat exchanger. Composition: Horizontal 200 litre natural circulation hot water boiler 20 glass vacuum tubes in 10-piece cases Heat exchanger and tank in stainless steel Automatic filling and control unit Anti-scald thermostatic mixing valve TECHNOLOGICAL ADVANTAGES: The most aesthetically pleasing natural circulation hot water boiler High-quality material guarantees optimal long-term operation 10-year boiler warranty Domestic hot water production in an ultra-hygienic system which avoids the problem of legionella Intuitive and simple assembly system on flat or pitched roofs Tested with the most innovative technologies Made in Italy TECHNICAL SPECIFICATIONS Product weight when empty (without fastenings) 75 kg Gross area (excluding boiler) 3.10 m 2 Absorber area 1.71 m 2 5 Stainless heat-exchanger area 2.40 m 2 DHW fittings material Brass Available colours Tile red / grey Insulation material Polyurethane Average insulation thickness 50 mm Maximum pressure on solar primary Atmospheric Maximum pressure on DHW secondary 6 bar (600 kpa) Solar fluid Water / Water + glycol Borosilicate glass tube material 3.3 Selective material Graded Cr-Al-N/ Cu Hail resistance (diameter) 40 mm 9292
8TSP00033 SKYPOWER 20T system Pegasus aesthetic version - Grey 1,930.99 8TSP00034 SKYPOWER 20T system Pegasus aesthetic version - Red roof tile colour 1,820.00 Fixing kit (integral part of system) 8TTP00010 Aluminium chassis kit SKYPOWER 200Lt. 20T. - Bent-tile installation 223.83 8TTP00014 Aluminium chassis kit SKYPOWER 200Lt. 20T. - Flat roof 226.19 Optional accessories 8TKR00051 Motorised 3-way diverter ball valve 3/4 179.55 8TKR00512 Double SPIRALRHOR stripwound steel hose DN 20mm + 3rd HOSE / Insulation 20mm [ /m] 46.36 8TKR00181 SPIRALRHOR stripwound fitting DN 20 x F 3/4 19.09 8TKR00206 SPIRALRHOR stripwound fitting DN 20 x M 3/4 16.78 5 93
PEGASUS: FLAT DHW SOLAR SYSTEM PEGASUS Natural circulation solar system, composed of high-efficiency flat collector, Puffer solar boiler for instantaneous production of domestic hot water via a copper heat exchanger. Composition: Horizontal 150 or 250 litre natural circulation hot water boiler Highly selective FTH 2.0 flat collectors Heat exchanger and tank in stainless steel Aluminium support frames available for versions Automatic filling and control unit Antifreeze/corrosion inhibitor mix for first fill Advantages: The most aesthetically pleasing natural circulation hot water boiler High-quality material guarantees optimal long-term operation 5+5-year product warranty Domestic hot water production in an ultra-hygienic system which avoids the problem of legionella Intuitive and simple assembly system on flat or pitched roofs Tested with the most innovative technologies Made in Italy 5 PEGASUS 150 FLAT PEGASUS 250 FLAT Boiler capacity Litres 150 250 Dry weight kg 106 176 Gross collector area m 2 2.15 4.30 Aperture area m 2 2.00 4.00 Absorber area m 2 2.00 4.00 Heat-exchanger material AISI 316 AISI 316 Boiler material AISI 304 AISI 304 Hydraulic fittings G 3/4 M 3/4 M Max heat-exchanger pressure bar 10 10 Boiler insulation PU PU Warranty years 10 10 9494
8TSP00051 PEGASUS 150 litre FTH system Grey 2,232.00 8TSP00052 PEGASUS 150 litre FTH system Tile red 2,172.78 8TSP00061 PEGASUS 250 litre FTH system Grey 3,330.00 8TSP00062 PEGASUS 250 litre FTH system Tile red 3,270.00 8TTP00050 Chassis KIT PGS 150 litre FTH Pitched roof / Bent tile brackets 194.68 8TTP00051 Chassis KIT PGS 150 litre FTH Pitched roof / Tile bracket 224.78 8TTP00052 Chassis KIT PGS 150 litre FTH Pitched roof / Long screws 208.28 8TTP00053 Chassis KIT PGS 150 litre FTH Flat roof 315.29 8TTP00060 Chassis KIT PGS 250 litre FTH Pitched roof / Bent tile brackets 355.41 8TTP00061 Chassis KIT PGS 250 litre FTH Pitched roof / Tile brackets 413.61 8TTP00062 Chassis KIT PGS 250 litre FTH Pitched roof / Long screws 332.31 8TTP00063 Chassis KIT PGS 250 litre FTH Flat roof 391.23 ACCESSORIES 8TKR00051 Motorised 3-way diverter ball valve 3/4 179.55 8TKR00512 Double SPIRALROHR stripwound steel hose DN 20mm + 3rd HOSE / Insulation 20mm [ /m] 46.36 8TKR00181 SPIRALRHOR stripwound fitting DN 20 x F 3/4 19.09 8TKR00206 SPIRALRHOR stripwound fitting DN 20 x M 3/4 16.78 5 95
FORCED CIRCULATION SOLAR SYSTEMS - VACUUM ACQUA RTH - BASIC: DHW VACUUM SYSTEMS Forced-circulation solar thermal systems: Vacuum collectors RTH Heatpipe Technology Systems designed to minimise costs ACQUA RTH SYSTEM COMPOSITION Um 150 200-2 200-1 300 400 500 RTH/DTH collector Fx base kit Pcs 1 2 1 2 3 3 Vertical DHW boiler, 2 fixed coils - H Pcs 1 1 1 1 1 1 Solar station 1V - Yonos Para ST 25/7.0-1-6 l/min. - 3/4 M Pcs 1 1 1 1 1 1 Digital solar control unit DeltaSol CS/4 - PWM - VFD Pcs 1 1 1 1 1 1 SOL expansion vessel 10bar Pcs 1 1 1 1 1 1 Expansion vessel Fx kit 3/4 L1000 Pcs 1 1 1 1 1 1 Solar thermostatic mixing valve - anti-scald 3/4 Pcs 1 1 1 1 1 1 Premixed diathermic fluid L -10 C CF Kg 15 25 15 25 25 25 DHW X DTH10 fittings kit Pcs 1 1 1 1 1 1 5 8TSI00010 DHW system 150 l 1xRTH10 - BASIC 2,243.04 8TSI00012 DHW system 200 l 2xRTH10 - BASIC 3,253.50 8TSI00013 DHW system 200 l 1xRTH10 - BASIC 2,427.30 8TSI00014 DHW system 300 l 2xRTH10 - BASIC 3,475.17 8TSI00016 DHW system 400 l 3xRTH10 - BASIC 4,519.80 8TSI00018 DHW system 500 l 3xRTH10 - BASIC 4,690.98 ACCESSORIES 8TKR00480 Double corrugated steel hose ECO DN 16mm / Insulation 20mm [ /m] 26.19 8TKR00176 CORRUGATED fitting DN 16 x F 3/4 15.32 8TKR00178 CORRUGATED fitting DN 16 x M 3/4 12.01 8TKR00051 Motorised 3-way diverter ball valve 3/4 179.55 8TSO00130 DL2 Solar Datalogger 501.60 9696
ACQUA DTH - PREMIUM: PREASSEMBLED DHW VACUUM SYSTEMS Forced-circulation solar thermal systems: Vacuum collectors DTH Direct-flow Technology Systems designed for maximum comfort and maximum heat production Systems designed to minimise installation times and costs ACQUA DTH SYSTEM COMPOSITION Um 200 300 400 500 10 DTH - Direct Flow Collector 10T CPC TH Pcs 1 2 3 3 RTH/DTH collector Fx base kit Pcs 1 2 3 3 Vert. DHW boiler, 2 coils - PREASSEMBLED H Pcs 1 1 1 1 DHW expansion vessel Pcs 1 1 1 1 SOL expansion vessel 10bar Pcs 1 1 1 1 Solar thermostatic mixing valve - anti-scald 1/2 Pcs 1 1 1 1 Premixed diathermic fluid L -20 C CF Kg 15 25 40 40 DHW X DTH10 fittings kit Pcs 1 1 1 1 8TSI00080 DHW system 200 l 1xDTH10 - PREMIUM 2,709.71 8TSI00082 DHW system 300 l 2xDTH10 - PREMIUM 3,970.70 8TSI00084 DHW system 400 l 3xDTH10 - PREMIUM 5,207.10 8TSI00086 DHW system 500 l 3xDTH10 - PREMIUM 5,331.40 ACCESSORIES 8TKR00480 Double corrugated steel hose ECO DN 16mm / Insulation 20mm [ /m] 26.19 8TKR00176 CORRUGATED fitting DN 16 x F 3/4 15.32 8TKR00178 CORRUGATED fitting DN 16 x M 3/4 12.01 8TKR00051 Motorised 3-way diverter ball valve 3/4 179.55 8TSO00130 DL2 Solar Datalogger 501.60 5 97
FORCED CIRCULATION SOLAR SYSTEMS - FLAT ACQUA FTH - BASIC: DHW FLAT SYSTEMS Forced circulation thermal solar systems for domestic hot water production, designed by Thermics for the lowest possible purchasing and running costs. Long-lasting, highly reliable systems suitable for limited Winter climates and production compared to the vacuum solution. Selective flat collectors Meander layout technology Systems designed for the lowest possible purchasing and running costs ACQUA FTH BASIC SYSTEM COMPOSITION FTH 2.0 flat solar collector - ECO ALU C/Core 18x1.0 Brass Solar station 1V - 1V - Yonos Para ST 25/7.0-1-6 l/min. - 3/4" M Um 150 200-1 200-2 300 400 500 Pcs 1 1 2 2 3 3 Pcs 1 1 2 2 3 3 Digital solar control unit DeltaSol CS/4 - PWM - VFD Pcs 1 1 1 1 1 1 Expansion vessel Fx kit 3/4 L1000 Pcs 1 1 1 1 1 1 FTH base Fx kit - ECO Bent-tile installation Pcs 1 1 1 1 1 1 Solar thermostatic mixing valve - anti-scald 3/4 Pcs 1 1 1 1 1 1 SOL expansion vessel 10bar Pcs 1 1 1 1 1 1 Premixed diathermic fluid L -10 C CF Kg 15 25 25 25 25 25 FTH 2.0 ECO fittings kit Pcs 1 1 1 1 1 1 5 8TSI00020 DHW system 150 l 1xFTH2.0 ECO - BASIC 1,908.09 8TSI00022 DHW system 200 l 1xFTH2.0 ECO - BASIC 2,212.00 8TSI00023 DHW system 200 l 2xFTH2.0 ECO - BASIC 2,758.25 8TSI00024 DHW system 300 l 2xFTH2.0 ECO - BASIC 2,898.50 8TSI00026 DHW system 400 l 3xFTH2.0 ECO - BASIC 3,771.60 8TSI00028 DHW system 500 l 3xFTH2.0 ECO - BASIC 3,878.60 ACCESSORIES 8TKR00480 Double corrugated steel hose ECO DN 16mm / Insulation 20mm [ /m] 26.19 8TKR00176 CORRUGATED fitting DN 16 x F 3/4 15.32 8TKR00178 CORRUGATED fitting DN 16 x M 3/4 12.01 8TKR00051 Motorised 3-way diverter ball valve 3/4 179.55 8TSO00130 DL2 Solar Datalogger 501.60 9898
ACQUA FTH - PREMIUM: PREASSEMBLED DHW FLAT SYSTEMS Forced circulation thermal solar systems for domestic hot water production, designed by Thermics for maximum reliability and durability. Systems suitable for limited Winter climates and production compared to the vacuum solution. The boiler is equipped with a pre-installed and pre-wired solar unit and control unit in order to ensure an even more standard and easy installation. Highly selective flat collectors Simple harp layout technology Maximum thermal insulation/collection capacity Systems designed for maximum comfort and maximum heat production Systems designed to minimise installation times and costs ACQUA FTH PREMIUM SYSTEM COMPOSITION Um 200 300 400 500 FTH flat collector C/22x1.0 Copper Core Pcs 1x2.5 2x2.0 3x2.0 3x2.5 FTH Base Fx rail kit Pcs 1 2 3 3 Vert. DHW boiler 2 coils fx - PREASSEMBLED H Pcs 1 1 1 1 DHW expansion vessel Pcs 1 1 1 1 SOL expansion vessel 10bar Pcs 1 1 1 1 Solar thermostatic mixing valve - anti-scald 1/2 Pcs 1 1 1 1 Premixed diathermic fluid L -20 C CF Kg 15 25 40 40 DHW fittings kit for FTH Pcs 1 1 1 1 8TSI00090 DHW system 200 l 1xFTH2.5 - PREMIUM 2,427.74 8TSI00092 DHW system 300 l 2xFTH2.0 - PREMIUM 3,286.05 8TSI00094 DHW system 400 l 3xFTH2.0 - PREMIUM 4,176.96 8TSI00096 DHW system 500 l 3xFTH2.5 - PREMIUM 4,605.40 ACCESSORIES 8TKR00480 Double corrugated steel hose ECO DN 16mm / Insulation 20mm [ /m] 26.19 8TKR00176 CORRUGATED fitting DN 16 x F 3/4 15.32 8TKR00178 CORRUGATED fitting DN 16 x M 3/4 12.01 8TKR00051 Motorised 3-way diverter ball valve 3/4 179.55 8TSO00130 DL2 Solar Datalogger 501.60 5 99
FORCED CIRCULATION SOLAR SYSTEMS - VACUUM ACQUEL 300: THERMAL SOLAR SYSTEM + HEAT PUMP Compact solar system for the production of domestic hot water, combined with an electric heat pump integrated in the boiler. Extremely simple system to install, with the following advantages: DHW available all year round at any time of day Independence from fossil fuels Energy savings up to 75% Simple, fast installation with all installation accessories included Minimised space required in heating plant Excellent solution when PV energy produced is consumed onsite Up to 4 times more efficient than an electrical element Kit for 4/5 persons ACQUEL 300 COMPOSITION Um 300-2 300-4 10 DTH - Direct Flow Collector 10T CPC TH Pcs 1 2 Flex. Fix. Kit RTH/DTH Pitched Roof Pcs 1 2 DTH/RTH CF fittings kit Pcs 1 1 Solar station 2V - Yonos Para ST 25/7.0-2-12 l/min. - 3/4 M Digital solar control unit DeltaSol CS/4 - PWM - VFD Pcs 1 1 Expansion vessel Fx kit 3/4 L1000 Pcs 1 1 SOL expansion vessel, 10bar, 25 litres Pcs 1 1 DHW expansion vessel, 25 litres Pcs 1 1 Premixed diathermic fluid L -20 C CF Kg 15 15 Solar thermostatic mixing valve - anti-scald 1/2 Pcs 1 1 PTH 300 1S. Pcs 1 1 5 8TSI00100 ACQUEL 300 system - 2 m 2 4,466.00 8TSI00101 ACQUEL 300 system - 2.5 m 2 - FLAT 4,420.92 8TSI00102 ACQUEL 300 system - 4 m 2 5,386.91 ACCESSORIES 8TKR00480 Double corrugated steel hose ECO DN 16mm / Insulation 20mm [ /m] 26.19 8TKR00176 CORRUGATED fitting DN 16 x F 3/4 15.32 8TKR00178 CORRUGATED fitting DN 16 x M 3/4 12.01 8TKR00051 Motorised 3-way diverter ball valve 3/4 179.55 8TSO00130 DL2 Solar Datalogger 501.60 100
COMBINED SYSTEMS COMBI - RTH SYSTEMS FOR HEATING INTEGRATION Forced circulation thermal solar systems for production of domestic hot water and integration with heating systems have been designed by Thermics for maximum reliability and to fit in perfectly with your requirements. Systems all include: New Dcond RTH-CPC series solar collectors Base installation frames Hydraulic fittings kit Combined three-coil stainless-steel boiler Solar circulation unit Pre-configured solar control unit Expansion vessels Premixed, ready-to-use glycol antifreeze Thermostatic mixer Motorised diverter valve COMBI RTH SYSTEMS COMPOSITION 500 800 1000 1500 10 RTH - Heatpipe Collector 10T CPC TH Pcs 4 5 6 8 Vert. combi 3coil stainless boiler Pcs 1 1 1 1 Solar station 2V - Yonos Para ST 25/7.0-2-12 l/min. - 3/4 M Pcs 1 1 1 1 COMBI RTH10 fittings kit Pcs 1 1 1 1 RTH/DTH collector Fx base kit Pcs 4 5 6 8 Digital solar control unit - DeltaSol CS Plus - PWM - VFD Pcs 1 1 1 1 Expansion vessel Fx kit 3/4 L1000 Pcs 2 2 5 2 Premixed diathermic fluid L -10 C CF Kg 50 50 50 75 SOL expansion vessel 10bar Pcs 1 1 1 1 HEAT. expansion vessel Pcs 1 1 1 1 DHW expansion vessel Pcs 1 1 1 1 Solar thermostatic mixing valve - anti-scald 1/2 Pcs 1 1 1 1 5 101
5 8TSI00030 COMBI 500 litre 4xRTH10 system 7,009.75 8TSI00031 COMBI 800 litre 5xRTH10 system 8,206.58 8TSI00032 COMBI 1000 litre 6xRTH10 system 9,232.52 8TSI00033 COMBI 1500 litre 8xRTH10 system 11,123.08 OPTIONAL ACCESSORIES 8TKR00480 Double corrugated steel hose ECO DN 16mm / Insulation 20mm [ /m] 26.19 8TKR00176 CORRUGATED fitting DN 16 x F 3/4 15.32 8TKR00178 CORRUGATED fitting DN 16 x M 3/4 12.01 8TKR00051 Motorised 3-way diverter ball valve 3/4 179.55 8TSO00130 DL2 Solar Datalogger 501.60 8TSO00113 Digital solar control unit Deltasol BX Plus 582.86 8SAR01001 TH10 ventilated dissipator assembly 337.71 102
SOLAR COOLING AND HEATING SYSTEMS SHC: SOLAR COOLING & HEATING SYSTEMS Complete solar systems for: Winter solar heating Summer solar cooling Year-round domestic hot water production The system is composed of: High-efficiency vacuum solar field, complete with brackets and fittings Solar pumping unit with pre-wired regulation and safety devices Inertial heat storage (for Summer and Winter use) Domestic hot water production station Adiabatic air dissipation system Zeolite thermal heat pump Back-up reversible electric heat pump 5 103
5 8TSI00800 SOLAR COOLING & HEATING 10kW system 45,476.42 SHC 10 absorption heat pump - external pumps Pcs 1 10 RTH - Heatpipe Collector 10T CPC TH Pcs 16 Single SPIRALRHOR stripwound steel hose DN 25mm / Insulation 20mm - 30m Pcs 1 Puffer storage with 1 coil - 1000 l with insulat. - H Pcs 2 RTH/DTH collector Fx base kit Pcs 16 2 long screws, L 300 kit Pcs 16 Flexible fitting 22x22 Pcs 14 SOL expansion vessel, 10bar, 150 litres Pcs 1 HEAT. expansion vessel 80 l Pcs 2 TEE fitting DN 25 - SPIRALRHOR Pcs 2 SPIRALRHOR stripwound fitting DN 25 x F 3/4 Pcs 4 Sump for sensor 100mm Brass Pcs 4 SPIRALRHOR stripwound fitting DN 25 x M 1 Pcs 2 Conn. Cross+Sump+Cap and breather Pcs 2 Straight fitting 22x M3/4 Brass Pcs 2 Hardware packaging min 15 Teflon seal 3/4 Pcs 4 Solar station 2V - Yonos Para ST 25/7.5-8-38 l/min. - 1 M Pcs 1 Solar control unit DeltaSol MX - SD Pcs 1 8TSI00810 SOLAR COOLING & HEATING 18kW system 70,598.17 SHC 18 absorption heat pump - external pumps Pcs 1 10 RTH - Heatpipe Collector 10T CPC TH Pcs 22 Single SPIRALRHOR stripwound steel hose DN 25mm / Insulation 20mm - 30m Pcs 1 Puffer storage with 1 coil - 1000 l with insulat. - H Pcs 2 RTH/DTH collector Fx base kit Pcs 22 2 long screws, L 300 kit Pcs 22 Flexible fitting 22x22 Pcs 20 SOL expansion vessel, 10bar, 200 litres Pcs 1 HEAT. expansion vessel 80lt Pcs 2 TEE fitting DN 25 - SPIRALRHOR Pcs 2 SPIRALRHOR stripwound fitting DN 25 x F 3/4 Pcs 4 Sump for sensor 100mm Brass Pcs 4 SPIRALRHOR stripwound fitting DN 25 x M 1 Pcs 2 Conn. Cross+Sump+Cap and breather Pcs 2 Straight fitting 22x M 3/4 Brass Pcs 2 Hardware packaging min 15 Teflon seal 3/4 Pcs 4 Solar station BIG MAVERICK VR-90 DN 32-20 / 70 l/min. Pcs 1 Solar control unit DeltaSol MX - SD Pcs 1 104
PRE-CONFIGURED THERMAL SOLAR FIELDS PRE-CONFIGURED THERMAL SOLAR FIELDS FOR EXCHANGE WITH DHW STORAGE FLAT FIELD - 16 m 2 - DHW Thermal solar field composed of flat solar panels. Complete with: 8 x FTH 2.0 ECO collectors Base brackets Series and parallel fittings 40 metres of insulated stainless-steel hose Final fittings and junctions Solar unit with heat exchanger Solar expansion vessel Solar fluid 8TSI00040 FLAT SOLAR FIELD - 16 m 2 - DHW 8,772.03 FLAT FIELD - 32 m 2 - DHW Thermal solar field composed of flat solar panels. Complete with: 16 x FTH 2.0 ECO collectors Base brackets Series and parallel fittings 40 metres of insulated stainless-steel hose Final fittings and junctions Solar unit with stainless-steel heat exchanger and control unit Solar expansion vessel Solar fluid 8TSI00045 FLAT SOLAR FIELD - 32 m 2 - DHW 16,620.12 FLAT FIELD - 48 m 2 - DHW Thermal solar field composed of flat solar panels. Complete with: 24 x FTH 2.0 ECO collectors Base brackets Series and parallel fittings 40 metres of insulated stainless-steel hose Final fittings and junctions Solar unit with stainless-steel heat exchanger and control unit Solar expansion vessel Solar fluid 5 8TSI00050 FLAT SOLAR FIELD - 48 m 2 - DHW 22,164.30 105
PRE-CONFIGURED THERMAL SOLAR FIELDS FOR EXCHANGE WITH HOT WATER THERMAL STORAGE FLAT FIELD - 16 m 2 - PUFFER Thermal solar field composed of flat solar panels. Complete with: 8 x FTH 2.0 ECO collectors Base brackets Series and parallel fittings 40 metres of insulated stainless-steel hose Final fittings and junctions Solar unit with heat exchanger Solar expansion vessel Solar fluid 8TSI00055 FLAT SOLAR FIELD - 16 m 2 - PUFFER 8,895.15 FLAT FIELD - 32 m 2 - PUFFER Thermal solar field composed of flat solar panels. Complete with: 16 x FTH 2.0 ECO collectors Base brackets Series and parallel fittings 40 metres of insulated stainless-steel hose Final fittings and junctions Solar unit with stainless-steel heat exchanger and control unit Solar expansion vessel Solar fluid 8TSI00057 FLAT SOLAR FIELD - 32 m 2 - PUFFER 16,519.14 5 FLAT FIELD - 48 m 2 - PUFFER Thermal solar field composed of flat solar panels. Complete with: 24 x FTH 2.0 ECO collectors Base brackets Series and parallel fittings 40 metres of insulated stainless-steel hose Final fittings and junctions Solar unit with stainless-steel heat exchanger and control unit Solar expansion vessel Solar fluid 8TSI00060 FLAT SOLAR FIELD - 48 m 2 - PUFFER 22,062.51 106