KITCHEN SINKS PRICE LIST 2017

Great Britain KITCHEN SINKS PRICE LIST 2017 VAT not included.

INTRODUCTION This price list replaces all previously valid price lists. It is valid for deliveries as of 1st April 2017. The prices given in this price list are recommended retail prices (VAT not included). Variations in colour and dimensions apply within the standard tolerances. We reserve the right to change colours and models. Ceramic materials from Villeroy & Boch possess a high degree of inherent stability. They are able to withstand all water temperatures and temperature shocks from hot and cold water and are resistant to steam. The glazes on sanitary ceramics from Villeroy & Boch are to a certain extent scratch-proof and resistant to all alkalis and acids which are common in the sanitary area. This scope of resistance does not include hydrofluoric acid and its compounds. Organic solvents and intensive agents will not affect the glaze. All offers, sales and deliveries of sanitary ceramic items and accessories are based on General Sales and Delivery Conditions of Villeroy & Boch AG Bath and Wellness Division. The manufacturer s consent shall be required for reproduction or duplication in any from, including extracts. CHANGE TO THE RANGE 1. New products 1.1 SINKS 3313/3312 Subway 45 Compact (page 41) 1.2 TAP FITTINGS 9274 Aloro (page 78) 9272 Como Switch (page 80) 9275 Como X (page 80) 9270 Finera (page 83) 9271 Finera Square (page 83) 1.3 ACCESSORIES 923620 Soap dispenser (page 92) 923630 Soap dispenser (page 92) 1.4 COLOURS SM Steam SL Stone TAP HOLES OVERVIEWS When ordering your sink, please specify tap holes you would like us to drill for you, by using their reference numbers. Additional charge: 5 / tap hole Ref. Number HL1 HL2 HL3 HL4 HL5 HL6 Description Tap hole 1 punched out Tap hole 2 punched out Tap hole 3 punched out Tap hole 4 punched out Tap hole 5 punched out Tap hole 6 punched out

INDEX GENERAL INFORMATION GENERAL INFORMATION 4 BUILT-IN SINKS 14 Corner sinks 14 Size of undercabinet 80 cm Size of undercabinet 60 cm Size of undercabinet 50 cm Size of undercabinet 45 cm 16 19 31 39 UNDERCOUNTER SINKS 45 FLUSHMOUNTED SINKS Size of undercabinet 60 cm Size of undercabinet 50 cm Size of undercabinet 45 cm 54 54 60 63 MODULES AND ECO SINKS 66 TAP FITTINGS 78 SPARE PARTS AND ACCESSORIES 93 INSTALLATION INSTRUCTIONS 96 GENERAL SALES AND DELIVERY CONDITIONS 108 3

GENERAL INFORMATION COLOUR RANGE Classicline Ceramicplus Flat Flat Flat Flat R1 White alpin S3 Edelweiss KR Cream FU Ivory i5 Sand i2 Cappuccino SM Steam SL Stone Flat Flat KD Fossil i4 Graphite Premiumline Ceramicplus Flat Flat Flat Flat KG Snow White TR Timber S5 Ebony J0 Chromit 50 Emerald 07 Sunrise 51 Coral 26 Midnight Trendline Ceramicplus KT Decor white pearl KW Decor la rose Please consult the inner pages of the price list for the availability of colours for the different sink models. 4

CERAMIC SINKS FROM VILLEROY&BOCH GENERAL INFORMATION A PERSONAL ELEMENT FOR YOUR HOME Ceramics from Villeroy&Boch combine the experience of traditional craftsmanship with maximum industrial precision. The result: products that enrich life with good design, lasting quality and with an assured sense of style. Kitchen sinks from Villeroy&Boch combine practicality and design with the tried-and-tested qualities of ceramics, which are offered by almost no other material. Great choice of colours: 18 lightfast colours and 2 special decors Soft to the touch and natural radiance Ceramics as hygiene benchmark, in hospitals and bathrooms Highly resistant and made to last Environmentally-compatible in terms of manufacture and disposal Made from 100% natural raw materials Harmless in contact with food 5

GENERAL INFORMATION CERAMIC SINKS: THE RANGE Corner sinks 90 cm Corner undersink cabinet side length SOLO CORNER 107,5 x 60 cm Only for corner installation Size of undercabinet: 90 cm Ref. 6708 (Page 15) ARENA CORNER 97,5 x 62,5 cm Only for corner installation Size of undercabinet: 90 cm Ref. 6729 (Page 14) Modules 90 cm Size of undercabinet MONUMENTUM 89,6 x 89,6 cm For corner undersink cabinet diagonal 45 with side length: 90 cm Ref. 3303 (Page 66) BUTLER 90 89,5 x 63 x 22 cm Ref. 6323 (Page 67) FARMHOUSE 90 89,5 x 55 cm Ref. 6332 (Page 69) 80 cm Size of undercabinet 60 cm Size of undercabinet FARMHOUSE 80 79,5 x 50 cm Ref. 6331 (Page 70) BUTLER 60 59,5 x 63 x 22 cm Ref. 6320 (Page 68) FARMHOUSE 60 60 x 50 cm Ref. 6322 (Page 71) 6

CERAMIC SINKS: THE RANGE GENERAL INFORMATION Built-in sinks Bowl on the right Bowl on the left Bowl reversible 80 cm Size of undercabinet TARGA 80 CONDOR 80 SUBWAY 80 NESTOR PLUS WINDSOR PLUS 112 x 51 cm 116 x 51 cm 116 x 51 cm 113 x 51,5 cm 120 x 60 cm Ref. 6752 (Page 18) Ref. 6746 (Page 16) Ref. 6726 (Page 17) Ref. 3391 (Page 74) Ref. 3390 (Page 75) Built-in and undercounter sinks 60 cm Size of undercabinet ARCHITECTURA 60 CONDOR 60 FLAVIA 60 METRIC ART 60 NEW WAVE 60 100 x 51 cm 100 x 51 cm 101 x 51 cm 100 x 51 cm 98 x 51 cm Ref. 3360 (Page 19) Ref. 6759 (Page 20) Ref. 3304 (Page 21) Ref. 6792 (Page 22) Ref. 6716 (Page 23) SUBWAY 60 SUBWAY 60 XL SUBWAY 60 XM SUBWAY 60 XR SUBWAY 60 S 100 x 51 cm 100 x 51 cm 62 x 51 cm 100 x 51 cm 60 x 51 cm Ref. 6712 Ref. 6770 (Page 24) Ref. 6719 Ref. 6718 (Page 26) Ref. 6780 (Page 27) Ref. 6721 Ref. 6720 (Page 28) Ref. 3309 (Page 25) TARGA 60 TIMELINE 60 CISTERNA 60B CISTERNA 60C SUBWAY 60 SU SUBWAY 60 XU 100 x 51 cm Ref. 6753 (Page 29) 100 x 51 cm Ref. 6790 (Page 30) 54,5 x 44 cm for undercounter Ref. 6702 (Page 45) 55 x 44 cm for undercounter Ref. 6706 (Page 46) 54,5 x 44 cm for undercounter Ref. 3310 (Page 50) 54,5 x 44 cm for undercounter Ref. 6758 (Page 51) 7

GENERAL INFORMATION CERAMIC SINKS: THE RANGE Built-in and undercounter sinks 50 cm Size of undercabinet ARCHITECTURA 50 CONDOR 50 FLAVIA 50 LAOLA 50 SUBWAY 50 SUBWAY 50 S 86 x 51 cm 86 x 51 cm 90 x 51 cm 90 x 51 cm 91,5 x 51 cm 52,5 x 51 cm Ref. 3350 (Page 31) Ref. 6744 (Page 32) Ref. 3305 (Page 33) Ref. 6778 (Page 34) Ref. 6713 Ref. 6773 (Page 35) Ref. 3315 (Page 36) TIMELINE 50 TARGA 50 MOGADOR TUDOR CISTERNA 50 SUBWAY 50 SU 90 x 51 cm Ref. 3307 (Page 38) 92 x 51 cm Ref. 6771 (Page 37) 100 x 60 cm Ref. 6738 (Page 73) 92 x 51 cm Ref. 6761 (Page 72) 44,5 x 44,5 cm for undercounter Ref. 6703 (Page 47) 44 x 44 cm for undercounter Ref. 3325 (Page 52) Built-in and undercounter sinks 45 cm / 26 cm Size of undercabinet CONDOR 45 FLAVIA 45 SUBWAY 45 SUBWAY 45 COMPACT SUBWAY 45 XS 80 x 51 cm 80 x 51 cm 78 x 51 cm 65 x 51 cm 47,5 x 51 cm Ref. 6745 (Page 39) Ref. 3306 (Page 40) Ref. 6714 Ref. 6772 (Page 42) Ref. 3313 Ref. 3312 (Page 41) Ref. 6781 (Page 43) TIMELINE 45 CISTERNA 45 SUBWAY 45 SU CISTERNA 26 80 x 51 cm Ref. 6791 (Page 44) 37 x 43,5 cm for undercounter Ref. 6704 (Page 48) 37,5 x 44 cm for undercounter Ref. 3324 (Page 53) 26 x 44 cm for undercounter Ref. 6707 (Page 49) 8

CERAMIC SINKS: THE RANGE GENERAL INFORMATION Flush-mounted sinks 60 cm Size of undercabinet SUBWAY 60 FLAT SUBWAY 60 XL FLAT SUBWAY 60 XM FLAT SUBWAY 60 XR FLAT SUBWAY 60 S FLAT 96,5 x 47,5 cm 96,5 x 47,5 cm 58,5 x 47,5 cm 96,5 x 47,5 cm 56,5 x 47,5 cm Ref. 6712 Ref. 6770 (Page 54) Ref. 6719 Ref. 6718 (Page 56) Ref. 6780 (Page 57) Ref. 6721 Ref. 6720 (Page 58) Ref. 3309 (Page 55) TIMELINE 60 FLAT 96,5 x 47,5 cm Ref. 6790 (Page 59) Flush-mounted sinks 50 cm Size of undercabinet SUBWAY 50 FLAT SUBWAY 50 S FLAT TIMELINE 50 FLAT 88 x 47,5 cm 49 x 47,5 cm 86,5 x 47,5 cm Ref. 6713 Ref. 6773 (Page 60) Ref. 3315 (Page 61) Ref. 3307 (Page 62) Flush-mounted sinks 45 cm Size of undercabinet SUBWAY 45 FLAT SUBWAY 45 XS FLAT TIMELINE 45 FLAT 74,5 x 47,5 cm 44 x 47,5 cm 76,5 x 47,5 cm Ref. 6714 Ref. 6772 (Page 63) Ref. 6781 (Page 64) Ref. 6791 (Page 65) 9

GENERAL INFORMATION CERAMIC SINKS: DÉCORS BRING YOUR CERAMICS TO LIFE La Rose and White Pearl, two charming white-on-white decors available for selected sinks. Inspired by extensive expertise in decorative techniques from the tableware sector, the unique La Rose and White Pearl surface finishes are available exclusively from Villeroy&Boch. LA ROSE DÉCOR WHITE PEARL DÉCOR LA ROSE DÉCOR WHITE PEARL DÉCOR Art. no. on draining area 6790 Timeline 60 3307 Timeline 50 6791 Timeline 45 6712/6770 Subway 60 6721/6720 Subway 60 XR 6719/6718 Subway 60 XL 6713/6773 Subway 50 6714/6772 Subway 45 Art. no. on tap ledge 6721/6720 Subway 60 XR 6712/6770 Subway 60 6719/6718 Subway 60 XL 6713/6773 Subway 50 6714/6772 Subway 45 at the front 6320 Butler sink 60 cm 6323 Butler sink 90 cm Our décors are only available for the basic colour White Alpin () and for built-in sinks (not possible for flush-fit or undercounter sinks). 10

CERAMIC SINKS: ADVANTAGES GENERAL INFORMATION KITCHEN CERAMICS: A FASCINATING MATERIAL Ceramic is an ultra-modern material and it is also being used increasingly in the kitchen. This is due to its wide-ranging advantages, as ceramics are easy-care, robust and hygienic. In addition, Villeroy&Boch developed the exclusive innovation CeramicPlus a dirt-repellent surface finish to be found on all kitchen sinks from Villeroy&Boch. Cleaning Ceramic is especially easy to clean Robustness Ceramic is resistant to shocks and scratches Durability Ceramic is resistant to temperatures and is lightfast Hygiene Ceramic does not take on flavours or odours Advantages of CeramicPlus: Dirt and water are virtually unable to gain a hold and flow off immediately Easy removal of limescale deposits and stubborn stains, such as tea, beetroot or red wine You only need about 10% of the previous cleaning time and cleaning agent* * When removing limescale compared with standard ceramics (study carried out by a German institute wfk-forschungsinstitut für Reinigungstechnologie). Conventional ceramics All ceramic sinks meet the functional requirements of DIN EN 13310. 11

GENERAL INFORMATION VILLEROY&BOCH: SUSTAINABILITY RESPONSIBLE: ENVIRONMENTAL PROTECTION IS SECOND NATURE TO VILLEROY&BOCH Environmental protection is self-evident for Villeroy&Boch, and all relevant process are controlled and linked worldwide by a central environment management unit. With a view to developing innovative production processes and solutions making more efficient use of energy and raw materials, reducing emissions and extending the service life of products well beyond the levels set by laws and regulations. SOME OF VILLEROY&BOCH S ENVIRONMENTAL ACTIVITIES: Continual reduction of waste water at all plants 40% reduction in CO2 emissions in Mettlach since 2005 EMAS (Eco Management and Audit Scheme) validation One of the first ceramics manufacturers worldwide to be awarded ISO 9001 certification Certification in accordance with international environmental management standard ISO 14001 and energy management standard DIN EN ISO 50001 Quality assurance in accordance with REACH regulation (EC) No. 1907/2006 (Registration, Evaluation, Authorisation and Restriction of Chemicals) EMAS validation (Eco Management And Audit Scheme) Bend in the Saar close to the headquarters of Villeroy & Boch AG in Mettlach 12

VILLEROY&BOCH: EXPERTISE IN CERAMICS GENERAL INFORMATION CERAMICS: EXPERTISE AND ORIGINALS Villeroy&Boch looks back on more than 265 years of experience and the pursuit of perfection. On traditions rooted in the masterly combination of technical innovation, design and superior quality that are upheld to this day, and thus continuing to set new standards in the future. Each product is outstanding on the strength of its unique form and lovingly crafted details 13

ARENA CORNER BULIT-IN SINKS Corner sink For surface-mounted installation Installation on a corner undersink cabinet with 90 cm side length Registered design Ref. Description (for XX, please enter colour number) Classicline Premiumline 6729 01 XX Corner sink with additional outlet in the draining board inclusive Strainer bowl and Waste system 664,00 746,00 basket strainer 6729 02 XX Corner sink with additional outlet in the draining board inclusive Strainer bowl and Waste system pop-up 701,00 783,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit TR Timber KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8349 00 K1 Salad basket, stainless steel 76,- 8248 00 61 Waste system basket strainer, chrome (included) 46,- 470 290 430 148 8249 00 61 Waste system pop-up, chrome (included) 83,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 280 9837 00 K2 Strainer bowl, transparent (included) 31,- View of holes for tap fittings 6729 6729 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. The tap holes marked with an are punched through as standard at the factory. Please refer to the assembly instructions Required size of worktop: see attached template (Ref. 9307 22 A0) 14

SOLO CORNER Corner sink For surface-mounted installation Installation on a corner undersink cabinet with 90 cm side length 2 basins, closable Registered design BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 6708 01 XX Corner sink inclusive Waste system basket strainer and Strainer bowl 588,00 659,00 6708 02 XX Corner sink inclusive Strainer bowl and Waste system pop-up 622,00 693,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit TR Timber KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K09 00 K1 Salad basket, stainless steel 74,- 8K80 00 61 Waste system basket strainer, chrome (included) 42,- 8K81 00 61 Waste system pop-up, chrome (included) 76,- 9405 05 61 Cover cap for turn lever for 9405 04 / 9405 08, chrome 16,- 9405 05 LB Cover cap for turn lever for 9405 04 / 9405 08, stainless steel finish (included) 32,- 9888 50 K2 Strainer bowl, transparent (included) 28,- 340 333 280 425 145 View of holes for tap fittings 6708 6708 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. The tap holes marked with an are punched through as standard at the factory. Please refer to the assembly instructions Required size of worktop: see attached template (Ref. 9307 B3 A5) 15

CONDOR 80 BULIT-IN SINKS The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 80 cm 2 basins, closable Registered design Ref. Description (for XX, please enter colour number) Classicline Premiumline 6746 01 XX Sink inclusive Waste system basket strainer 605,00 680,00 6746 02 XX Sink inclusive Waste system pop-up 643,00 718,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit TR Timber KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K30 10 00 Accessory set consisting of: 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 390 280 140 550 280 42 8345 47 K1 Inset strainer, stainless steel 70,- 8234 00 61 Waste system basket strainer, chrome (included) 62,- 375 190 50 8236 00 61 Waste system pop-up, chrome (included) 100,- 9405 05 61 Cover cap for turn lever for 9405 04 / 9405 08, chrome 16,- 9405 05 LB Cover cap for turn lever for 9405 04 / 9405 08, stainless steel finish (included) 32,- View of holes for tap fittings 6746 6746 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 113 x 47 cm 16

SUBWAY 80 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 80 cm 2 basins, closable Registered design BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 6726 01 XX Sink inclusive Waste system basket strainer 614,00 690,00 6726 02 XX Sink inclusive Waste system pop-up 652,00 728,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit TR Timber KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K07 10 00 Accessory set consisting of: 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 376 325 140 550 280 42 8345 47 K1 Inset strainer, stainless steel 70,- 8223 00 61 Waste system basket strainer, chrome (included) 62,- 375 190 50 8226 00 61 Waste system pop-up, chrome (included) 100,- 9405 05 61 Cover cap for turn lever for 9405 04 / 9405 08, chrome 16,- 9405 05 LB Cover cap for turn lever for 9405 04 / 9405 08, stainless steel finish (included) 32,- View of holes for tap fittings 6726 6726 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 113 x 48 cm 17

TARGA 80 BULIT-IN SINKS The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 80 cm 2 basins, closable Registered design Ref. Description (for XX, please enter colour number) Classicline Premiumline 6752 01 XX Sink inclusive Waste system basket strainer 372,00 412,00 Classicline 01 White (alpin) Premiumline 31 Cappuccino 36 Glossy Black 73 Sand Ref. Optional accessories / spare parts 8235 00 61 Waste system basket strainer, chrome (included) 62,- View of holes for tap fittings 6752 6752 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 108,5 x 46 cm 18

ARCHITECTURA 60 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 60 cm BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 3360 01 XX Sink inclusive Waste system basket strainer 416,00 467,00 3360 02 XX Sink inclusive Waste system pop-up 463,00 514,00 Classicline Premiumline KR Cream i4 Graphite SM Steam J0 Chromit TR Timber S3 Edelweiss FU Ivory SL Stone S5 Ebony KD Fossil i5 Sand R1 White (alpin) KG Snow White Ref. Optional accessories / spare parts 8K14 00 00 Accessory set consisting of: 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 403 379 150 550 280 42 8345 47 K1 Inset strainer, stainless steel 70,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 375 190 50 8286 00 61 Waste system pop-up, chrome (included) 83,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- View of holes for tap fittings 3360 3360 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 97 x 48 cm 19

CONDOR 60 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 60 cm Registered design BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 6759 01 XX Sink inclusive Strainer bowl and Waste system basket strainer 519,00 580,00 6759 02 XX Sink inclusive Strainer bowl and Waste system pop-up 556,00 617,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit TR Timber KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K02 10 00 Accessory set consisting of: 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 380 330 140 550 280 42 8345 47 K1 Inset strainer, stainless steel 70,- 8214 00 61 Waste system basket strainer, chrome (included) 46,- 375 190 50 8215 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8306 00 K2 Strainer bowl, transparent (included) 27,- View of holes for tap fittings 6759 6759 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 97 x 47 cm 20

FLAVIA 60 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 60 cm BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 3304 01 XX Sink inclusive Waste system basket strainer 532,00 599,00 3304 02 XX Sink inclusive Waste system pop-up 569,00 636,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit TR Timber KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K10 10 00 Accessory set consisting of: 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 8K92 00 61 Waste system basket strainer, chrome (included) 46,- 8K96 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K23 00 K1 Strainer bowl, stainless steel 93,- 550 280 42 View of holes for tap fittings 3304 3304 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Please refer to the assembly instructions Required size of worktop: 98 x 48 cm 21

METRIC ART 60 BULIT-IN SINKS The sink is reversible High mounting rim: 5 cm For surface-mounted installation Minimum width of undersink cabinet: 60 cm Registered design Ref. Description (for XX, please enter colour number) Classicline Premiumline 6792 01 XX Sink inclusive Waste system basket strainer 762,00 863,00 6792 02 XX Sink inclusive Waste system pop-up 799,00 900,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit TR Timber KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K12 00 K1 Salad basket, stainless steel 76,- 9K08 00 K1 Rolling mat, stainless steel 74,- 403 379 150 375 190 50 8345 47 K1 Inset strainer, stainless steel 70,- 8254 00 61 Waste system basket strainer, chrome (included) 46,- 8252 00 61 Waste system pop-up, chrome (included) 83,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- View of holes for tap fittings 6792 6792 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 96 x 47 cm 22

NEWWAVE 60 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 60 cm Registered design BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 6716 01 XX Sink inclusive Strainer bowl and Waste system basket strainer 581,00 651,00 6716 02 XX Sink inclusive Strainer bowl and Waste system pop-up 618,00 688,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit TR Timber KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8304 50 K1 Salad basket, stainless steel 76,- 8214 00 61 Waste system basket strainer, chrome (included) 46,- 8215 00 61 Waste system pop-up, chrome (included) 83,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8306 50 K2 Strainer bowl, transparent (included) 27,- 360 364 147 View of holes for tap fittings 6716 6716 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: see attached template (Ref. 9307 B2 A5) 23

SUBWAY 60 Available with bowl on the right or left-hand side For surface-mounted installation Minimum width of undersink cabinet: 60 cm Registered design BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline 6712 01 XX Sink bowl right inclusive Waste system basket strainer 542,00 610,00 655,00 6770 01 XX Sink bowl left inclusive Waste system basket strainer 542,00 610,00 655,00 6712 02 XX Sink bowl right inclusive Waste system pop-up 579,00 647,00 692,00 6770 02 XX Sink bowl left inclusive Waste system pop-up 579,00 647,00 692,00 Classicline Premiumline Trendline i2 Cappuccino KD Fossil i5 Sand R1 White J0 Chromit TR Timber KW La Rose (alpin) (on the draining area) KR Cream i4 Graphite SM Steam S5 Ebony KT White Pearl (on the tap hole surface) S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K04 10 00 Accessory set consisting of: - a universal cutting board made of beech - a stainless steel salad basket 76,- 335 325 140 550 280 42 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8214 00 61 Waste system basket strainer, chrome (included) 46,- 325 115 80 8215 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- View of holes for tap fittings 6712 6712 6770 6770 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. 24 Please refer to the assembly instructions Required size of worktop: 97 x 48 cm

SUBWAY 60 S For surface-mounted installation Minimum width of undersink cabinet: 60 cm BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 3309 01 XX Sink inclusive Waste system basket strainer 381,00 426,00 3309 02 XX Sink inclusive Waste system pop-up 428,00 473,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit 50 Emerald 07 Sunrise KR Cream i4 Graphite SM Steam 51 Coral 26 Midnight TR Timber S3 Edelweiss FU Ivory SL Stone S5 Ebony KG Snow White Ref. Optional accessories / spare parts 8K09 10 00 Accessory set consisting of: - a universal cutting board made of beech - a stainless steel salad basket 76,- 550 280 42 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 325 115 80 8286 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- View of holes for tap fittings 3309 3309 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 57 x 48 cm 25

SUBWAY 60 XL Available with bowl on the right or left-hand side For surface-mounted installation Minimum width of undersink cabinet: 60 cm Registered design BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline 6719 01 XX Sink bowl right inclusive Waste system basket strainer 511,00 576,00 619,00 6718 01 XX Sink bowl left inclusive Waste system basket strainer 511,00 576,00 619,00 6719 02 XX Sink bowl right inclusive Waste system pop-up 558,00 623,00 666,00 6718 02 XX Sink bowl left inclusive Waste system pop-up 558,00 623,00 666,00 Classicline Premiumline Trendline i2 Cappuccino KD Fossil i5 Sand R1 White J0 Chromit TR Timber KW La Rose (alpin) (on the draining area) KR Cream i4 Graphite SM Steam S5 Ebony KT White Pearl (on the tap hole surface) S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K09 10 00 Accessory set consisting of: - a universal cutting board made of beech - a stainless steel salad basket 76,- 550 280 42 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 325 115 80 8286 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- View of holes for tap fittings 6719 6719 6718 6718 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. 26 Please refer to the assembly instructions Required size of worktop: 97 x 48 cm

SUBWAY 60 XM For surface-mounted installation Minimum width of undersink cabinet: 60 cm BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 6780 01 XX Sink inclusive Waste system basket strainer 435,00 487,00 6780 02 XX Sink inclusive Waste system pop-up 472,00 524,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit TR Timber KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K04 10 00 Accessory set consisting of: - a universal cutting board made of beech - a stainless steel salad basket 76,- 335 325 140 550 280 42 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8214 00 61 Waste system basket strainer, chrome (included) 46,- 325 115 80 8215 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- View of holes for tap fittings 6780 6780 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 59 x 48 cm 27

SUBWAY 60 XR Available with bowl on the right or left-hand side For surface-mounted installation Minimum width of undersink cabinet: 60 cm 2 basins, closable BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline 6721 01 XX Sink bowl right inclusive Waste system basket strainer 533,00 597,00 640,00 6720 01 XX Sink bowl left inclusive Waste system basket strainer 533,00 597,00 640,00 6721 02 XX Sink bowl right inclusive Waste system pop-up 571,00 635,00 678,00 6720 02 XX Sink bowl left inclusive Waste system pop-up 571,00 635,00 678,00 Classicline Premiumline Trendline i2 Cappuccino KD Fossil i5 Sand R1 White J0 Chromit TR Timber KW La Rose (alpin) (on the draining area) KR Cream i4 Graphite SM Steam S5 Ebony KT White Pearl (on the tap hole surface) S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K05 10 00 Accessory set consisting of: - a universal cutting board made of beech - a stainless steel salad basket 76,- 275 325 140 550 280 42 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8223 00 61 Waste system basket strainer, chrome (included) 62,- 325 115 80 8226 00 61 Waste system pop-up, chrome (included) 100,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 05 61 Cover cap for turn lever for 9405 04 / 9405 08, chrome 16,- 9405 05 LB Cover cap for turn lever for 9405 04 / 9405 08, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- View of holes for tap fittings 6721 6721 6720 6720 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. 28 Please refer to the assembly instructions Required size of worktop: 97 x 48 cm

TARGA 60 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 60 cm Registered design BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 6753 01 XX Sink inclusive Waste system basket strainer 329,00 361,00 Classicline 01 White (alpin) Premiumline 31 Cappuccino 36 Glossy Black 73 Sand Ref. Optional accessories / spare parts 8235 00 61 Waste system basket strainer, chrome (included) 62,- View of holes for tap fittings 6753 6753 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 97 x 47 cm 29

TIMELINE 60 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 60 cm BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline 6790 01 XX Sink inclusive Waste system basket strainer 546,00 616,00 663,00 6790 02 XX Sink inclusive Waste system pop-up 593,00 663,00 710,00 Classicline Premiumline Trendline i2 Cappuccino KD Fossil i5 Sand R1 White J0 Chromit 50 Emerald 07 Sunrise KW La Rose (alpin) (on the draining area) KR Cream i4 Graphite SM Steam 51 Coral 26 Midnight TR Timber S3 Edelweiss FU Ivory SL Stone S5 Ebony KG Snow White Ref. Optional accessories / spare parts 8K14 00 00 Accessory set consisting of: 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 403 379 150 550 280 42 8276 00 61 Waste system basket strainer, chrome (included) 36,- 8286 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- View of holes for tap fittings 6790 6790 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 97 x 48 cm 30

ARCHITECTURA 50 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 50 cm BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 3350 01 XX Sink inclusive Sink and Waste system basket strainer 374,00 418,00 3350 02 XX Sink inclusive Sink and Waste system pop-up 421,00 465,00 Classicline Premiumline KR Cream i4 Graphite SM Steam J0 Chromit TR Timber S3 Edelweiss FU Ivory SL Stone S5 Ebony KD Fossil i5 Sand R1 White (alpin) KG Snow White Ref. Optional accessories / spare parts 8K29 10 00 Accessory set consisting of: 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 550 280 42 8345 47 K1 Inset strainer, stainless steel 70,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 375 190 50 8286 00 61 Waste system pop-up, chrome (included) 83,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- View of holes for tap fittings 3350 3350 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Required size of worktop: 83 x 48 cm 31

BULIT-IN SINKS CONDOR 50 Available with bowl on the right or left-hand side For surface-mounted installation Minimum width of undersink cabinet: 50 cm Registered design Ref. Description (for XX, please enter colour number) 01 6744 80 01 Sink bowl right, without waste system 371,00 6744 85 01 Sink bowl left, without waste system 371,00 Classicline 01 White (alpin) Ref. Optional accessories / spare parts 8K03 10 00 Accessory set consisting of: 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 8345 47 K1 Inset strainer, stainless steel 70,- 8244 00 61 Waste system basket strainer, chrome (included) 46,- 8245 00 61 Waste system pop-up, chrome (included) 83,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8314 00 K2 Strainer bowl, transparent (included) 32,- 380 300 140 375 190 50 550 280 42 View of holes for tap fittings 6744 80 6744 6744 85 The tap holes marked with an are punched through as standard at the factory. When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). 32 Please refer to the assembly instructions Required size of worktop: 82,5 x 47 cm

FLAVIA 50 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 50 cm BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 3305 01 XX Sink inclusive Waste system basket strainer 440,00 493,00 3305 02 XX Sink inclusive Waste system pop-up 477,00 530,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit TR Timber KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K11 20 00 Accessory set consisting of: 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 8K24 00 K1 Strainer bowl, stainless steel 74,- 8K93 00 61 Waste system basket strainer, chrome (included) 46,- 8K97 00 61 Waste system pop-up, chrome (included) 83,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 550 280 42 View of holes for tap fittings 3305 3305 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 87 x 48 cm 33

LAOLA 50 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 50 cm Registered design BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 6778 01 XX Sink inclusive Strainer bowl and Waste system basket strainer 502,00 560,00 6778 02 XX Sink inclusive Strainer bowl and Waste system pop-up 539,00 597,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit TR Timber KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K90 10 00 Accessory set consisting of: 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 405 290 145 550 280 42 8254 00 61 Waste system basket strainer, chrome (included) 46,- 8252 00 61 Waste system pop-up, chrome (included) 83,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 9884 00 K2 Strainer bowl, transparent (included) 27,- View of holes for tap fittings 6778 6778 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 86,5 x 47 cm 34

SUBWAY 50 Available with bowl on the right or left-hand side For surface-mounted installation Minimum width of undersink cabinet: 50 cm Registered design BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline 6713 01 XX Sink bowl right inclusive Waste system basket strainer 461,00 517,00 554,00 6773 01 XX Sink bowl left inclusive Waste system basket strainer 461,00 517,00 554,00 6713 02 XX Sink bowl right inclusive Waste system pop-up 498,00 554,00 591,00 6773 02 XX Sink bowl left inclusive Waste system pop-up 498,00 554,00 591,00 Classicline Premiumline Trendline i2 Cappuccino KD Fossil i5 Sand R1 White J0 Chromit TR Timber KW La Rose (alpin) (on the draining area) KR Cream i4 Graphite SM Steam S5 Ebony KT White Pearl (on the tap hole surface) S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K05 10 00 Accessory set consisting of: - a universal cutting board made of beech - a stainless steel salad basket 76,- 275 325 140 550 280 42 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8214 00 61 Waste system basket strainer, chrome (included) 46,- 325 115 80 8215 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- View of holes for tap fittings 6713 6713 6773 6773 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 88 x 48 cm 35

SUBWAY 50 S For surface-mounted installation Minimum width of undersink cabinet: 50 cm BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 3315 01 XX Sink inclusive Waste system basket strainer 348,00 388,00 3315 02 XX Sink inclusive Waste system pop-up 395,00 435,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit 50 Emerald 07 Sunrise KR Cream i4 Graphite SM Steam 51 Coral 26 Midnight TR Timber S3 Edelweiss FU Ivory SL Stone S5 Ebony KG Snow White Ref. Optional accessories / spare parts 8K99 10 00 Accessory set consisting of: - a universal cutting board made of beech - a stainless steel salad basket 76,- 320 370 143 550 280 42 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 325 115 80 8286 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- View of holes for tap fittings 3315 3315 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 49,5 x 48 cm 36

TARGA 50 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 50 cm Registered design BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 6771 01 XX Sink inclusive Waste system basket strainer 301,00 333,00 Classicline 01 White (alpin) Premiumline 31 Cappuccino 36 Glossy Black 73 Sand Ref. Optional accessories / spare parts 8285 00 61 Waste system basket strainer, chrome (included) 62,- View of holes for tap fittings 6771 6771 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 88 x 46 cm 37

TIMELINE 50 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 50 cm BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline 3307 01 XX Sink inclusive Waste system basket strainer 485,00 546,00 587,00 3307 02 XX Sink inclusive Waste system pop-up 532,00 593,00 634,00 Classicline Premiumline Trendline i2 Cappuccino KD Fossil i5 Sand R1 White J0 Chromit 50 Emerald 07 Sunrise KW La Rose (alpin) (on the draining area) KR Cream i4 Graphite SM Steam 51 Coral 26 Midnight TR Timber S3 Edelweiss FU Ivory SL Stone S5 Ebony KG Snow White Ref. Optional accessories / spare parts 8K29 10 00 Accessory set consisting of: 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 8286 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 550 280 42 View of holes for tap fittings 3307 3307 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 87 x 48 cm 38

CONDOR 45 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 45 cm BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 6745 01 XX Sink inclusive Waste system basket strainer 410,00 458,00 6745 02 XX Sink inclusive Waste system pop-up 447,00 495,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit TR Timber KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K30 10 00 Accessory set consisting of: 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 390 280 140 550 280 42 8345 47 K1 Inset strainer, stainless steel 70,- 8231 00 61 Waste system basket strainer, chrome (included) 46,- 375 190 50 8233 00 61 Waste system pop-up, chrome (included) 83,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- View of holes for tap fittings 6745 6745 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 76 x 47 cm 39

FLAVIA 45 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 45 cm BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 3306 01 XX Sink inclusive Waste system basket strainer 418,00 467,00 3306 02 XX Sink inclusive Waste system pop-up 455,00 504,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit TR Timber KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K17 10 00 Accessory set consisting of: 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 8K24 00 K1 Strainer bowl, stainless steel 74,- 8K93 00 61 Waste system basket strainer, chrome (included) 46,- 8K97 00 61 Waste system pop-up, chrome (included) 83,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 550 280 42 View of holes for tap fittings 3306 3306 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 77 x 48 cm 40

SUBWAY 45 COMPACT Available with bowl on the right or left-hand side For surface-mounted installation Minimum width of undersink cabinet: 45 cm BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 3313 01 XX Sink bowl right inclusive Waste system basket strainer 391,00 438,00 3312 01 XX Sink bowl left inclusive Waste system basket strainer 391,00 438,00 3313 02 XX Sink bowl right inclusive Waste system pop-up 438,00 485,00 3312 02 XX Sink bowl left inclusive Waste system pop-up 438,00 485,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit TR Timber KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K06 10 00 Accessory set consisting of: - a universal cutting board made of beech - a stainless steel salad basket 76,- 350 325 140 550 280 42 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 325 115 80 8286 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- View of holes for tap fittings 3313 3313 3312 3312 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 62 x 48 cm 41

SUBWAY 45 Available with bowl on the right or left-hand side For surface-mounted installation Minimum width of undersink cabinet: 45 cm BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline 6714 01 XX Sink bowl right inclusive Waste system basket strainer 443,00 498,00 534,00 6772 01 XX Sink bowl left inclusive Waste system basket strainer 443,00 498,00 534,00 6714 02 XX Sink bowl right inclusive Waste system pop-up 490,00 545,00 581,00 6772 02 XX Sink bowl left inclusive Waste system pop-up 490,00 545,00 581,00 Classicline Premiumline Trendline i2 Cappuccino KD Fossil i5 Sand R1 White J0 Chromit TR Timber KW La Rose (alpin) (on the draining area) KR Cream i4 Graphite SM Steam S5 Ebony KT White Pearl (on the tap hole surface) S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 8K06 10 00 Accessory set consisting of: - a universal cutting board made of beech - a stainless steel salad basket 76,- 350 325 140 550 280 42 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 325 115 80 8286 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- View of holes for tap fittings 6714 6714 6772 6772 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. 42 Please refer to the assembly instructions Required size of worktop: 74 x 48 cm

SUBWAY 45 XS For surface-mounted installation Minimum width of undersink cabinet: 45 cm BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 6781 01 XX Sink inclusive Waste system basket strainer 391,00 438,00 6781 02 XX Sink inclusive Waste system pop-up 438,00 485,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) J0 Chromit 50 Emerald 07 Sunrise KR Cream i4 Graphite SM Steam 51 Coral 26 Midnight TR Timber S3 Edelweiss FU Ivory SL Stone S5 Ebony KG Snow White Ref. Optional accessories / spare parts 8K06 10 00 Accessory set consisting of: - a universal cutting board made of beech - a stainless steel salad basket 76,- 350 325 140 550 280 42 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 325 115 80 8286 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- View of holes for tap fittings 6781 6781 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 44,5 x 48 cm 43

TIMELINE 45 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 45 cm BULIT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline 6791 01 XX Sink inclusive Waste system basket strainer 473,00 532,00 572,00 6791 02 XX Sink inclusive Waste system pop-up 520,00 579,00 619,00 Classicline Premiumline Trendline i2 Cappuccino KD Fossil i5 Sand R1 White J0 Chromit 50 Emerald 07 Sunrise KW La Rose (alpin) (on the draining area) KR Cream i4 Graphite SM Steam 51 Coral 26 Midnight TR Timber S3 Edelweiss FU Ivory SL Stone S5 Ebony KG Snow White Ref. Optional accessories / spare parts 8K15 00 00 Accessory set consisting of: 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 390 277 182 550 280 42 8276 00 61 Waste system basket strainer, chrome (included) 36,- 8286 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- View of holes for tap fittings 6791 6791 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions Required size of worktop: 77 x 48 cm 44

CISTERNA 60B Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm 2 basins, closable Registered design Possible combinations undercounter see pages 106/107 Ref. Description (for XX, please enter colour number) Classicline Premiumline 6702 01 XX Undercounter sink inclusive Waste system basket strainer, Fastening set and Strainer bowl 479,00 528,00 6702 02 XX Undercounter sink inclusive Waste system pop-up, Fastening set and Strainer bowl 516,00 565,00 Classicline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) Premiumline J0 Chromit TR Timber UNDERCOUNTER SINKS KR Cream i4 Graphite SM Steam 01* White (alpin) S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White * The colour 01: CeramicPlus not included Ref. Optional accessories / spare parts 9841 00 K1 Salad basket, stainless steel 76,- 9K08 00 K1 Rolling mat, stainless steel 74,- 8282 00 61 Waste system basket strainer, chrome (included) 62,- 8283 00 61 Waste system pop-up, chrome (included) 99,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 05 61 Cover cap for turn lever for 9405 04 / 9405 08, chrome 16,- 9405 05 LB Cover cap for turn lever for 9405 04 / 9405 08, stainless steel finish (included) 32,- 9851 00 K2 Strainer bowl, transparent 28,- 9218 03 00 Fastening set 22,- 320 370 143 Required size of worktop 6702 see attached template (Ref. 9307 71 A2) Please refer to the assembly instructions Required size of worktop: see attached template (Ref. 9307 71 A2) 45

CISTERNA 60C Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm Registered design Possible combinations undercounter see pages 106/107 UNDERCOUNTER SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 6706 01 XX Undercounter sink inclusive Waste system basket strainer and Fastening set 457,00 510,00 6706 02 XX Undercounter sink inclusive Waste system pop-up and Fastening set 504,00 557,00 Classicline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) Premiumline J0 Chromit TR Timber KR Cream i4 Graphite SM Steam 01* White (alpin) S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White * The colour 01: CeramicPlus not included Ref. Optional accessories / spare parts 8397 00 K1 Salad basket, stainless steel 76,- 9K08 00 K1 Rolling mat, stainless steel 74,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 8286 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 9218 03 00 Fastening set 22,- 470 365 143 Required size of worktop 6706 see attached template (Ref. 9307 91 A3) Please refer to the assembly instructions Required size of worktop: see attached template (Ref. 9307 91 A3) 46

CISTERNA 50 Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 50 cm Registered design Possible combinations undercounter see pages 106/107 Ref. Description (for XX, please enter colour number) Classicline Premiumline 6703 01 XX Undercounter sink inclusive Waste system basket strainer and Fastening set 424,00 473,00 6703 02 XX Undercounter sink inclusive Waste system pop-up and Fastening set 471,00 520,00 Classicline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) Premiumline J0 Chromit TR Timber UNDERCOUNTER SINKS KR Cream i4 Graphite SM Steam 01* White (alpin) S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White * The colour 01: CeramicPlus not included Ref. Optional accessories / spare parts 9849 00 K1 Salad basket, stainless steel 76,- 9K08 00 K1 Rolling mat, stainless steel 74,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 8286 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 9218 03 00 Fastening set 22,- 370 370 143 Required size of worktop 6703 see attached template (Ref. 9307 72 A2) Please refer to the assembly instructions Required size of worktop: see attached template (Ref. 9307 72 A2) 47

CISTERNA 45 Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 45 cm Registered design Possible combinations undercounter see pages 106/107 UNDERCOUNTER SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 6704 01 XX Undercounter sink inclusive Waste system basket strainer and Fastening set 404,00 450,00 6704 02 XX Undercounter sink inclusive Waste system pop-up and Fastening set 451,00 497,00 Classicline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) Premiumline J0 Chromit TR Timber KR Cream i4 Graphite SM Steam 01* White (alpin) S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White * The colour 01: CeramicPlus not included Ref. Optional accessories / spare parts 9850 00 K1 Salad basket, stainless steel 76,- 9K08 00 K1 Rolling mat, stainless steel 74,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 8286 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 9218 03 00 Fastening set 22,- 370 300 143 Required size of worktop 6704 see attached template (Ref. 9307 73 A2) Please refer to the assembly instructions Required size of worktop: see attached template (Ref. 9307 73 A2) 48

CISTERNA 26 Installation in natural stone or artificial stone countertops Registered design Possible combinations undercounter see pages 106/107 Ref. Description (for XX, please enter colour number) Classicline Premiumline 6707 01 XX Undercounter sink inclusive Waste system basket strainer and Fastening set 286,00 314,00 6707 02 XX Undercounter sink inclusive Waste system pop-up and Fastening set 333,00 361,00 Classicline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) Premiumline J0 Chromit TR Timber UNDERCOUNTER SINKS KR Cream i4 Graphite SM Steam 01* White (alpin) S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White * The colour 01: CeramicPlus not included Ref. Optional accessories / spare parts 9K08 00 K1 Rolling mat, stainless steel 74,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 8286 00 61 Waste system pop-up, chrome (included) 83,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 9218 03 00 Fastening set 22,- Required size of worktop 6707 see attached template (Ref. 9307 92 A3) Please refer to the assembly instructions Required size of worktop: see attached template (Ref. 9307 92 A3) 49

SUBWAY 60 SU Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm Possible combinations undercounter see pages 106/107 UNDERCOUNTER SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 3310 01 XX Sink inclusive Waste system basket strainer 398,00 446,00 3310 02 XX Sink inclusive Waste system pop-up 445,00 493,00 Classicline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) Premiumline J0 Chromit 50 Emerald 07 Sunrise KR Cream i4 Graphite SM Steam 51 Coral 26 Midnight TR Timber S3 Edelweiss FU Ivory SL Stone S5 Ebony KG Snow White Ref. Optional accessories / spare parts 8397 00 K1 Salad basket, stainless steel 76,- 9K08 00 K1 Rolling mat, stainless steel 74,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 8286 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 9218 03 00 Fastening set 22,- 470 365 143 Required size of worktop 3310 see attached template (Ref. 9307 G9 A9) Please refer to the assembly instructions Required size of worktop: see attached template (Ref. 9307 G9 A9) 50

SUBWAY 60 XU Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm 2 basins, closable Ref. Description (for XX, please enter colour number) Classicline Premiumline 6758 01 XX Sink inclusive Waste system basket strainer 438,00 488,00 6758 02 XX Sink inclusive Waste system pop-up 475,00 525,00 Classicline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) Premiumline J0 Chromit TR Timber UNDERCOUNTER SINKS KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White Ref. Optional accessories / spare parts 9841 00 K1 Salad basket, stainless steel 76,- 9K08 00 K1 Rolling mat, stainless steel 74,- 8282 00 61 Waste system basket strainer, chrome (included) 62,- 8283 00 61 Waste system pop-up, chrome (included) 99,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 05 61 Cover cap for turn lever for 9405 04 / 9405 08, chrome 16,- 9405 05 LB Cover cap for turn lever for 9405 04 / 9405 08, stainless steel finish (included) 32,- 9218 03 00 Fastening set 22,- 320 370 143 Required size of worktop 6758 see attached template (Ref. 9307 G9 A9) Please refer to the assembly instructions Required size of worktop: see attached template (Ref. 9307 G9 A9) 51

SUBWAY 50 SU Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 50 cm Possible combinations undercounter see pages 106/107 UNDERCOUNTER SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline 3325 01 XX Sink inclusive Waste system basket strainer 346,00 386,00 3325 02 XX Sink inclusive Waste system pop-up 393,00 433,00 Classicline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) Premiumline J0 Chromit 50 Emerald 07 Sunrise KR Cream i4 Graphite SM Steam 51 Coral 26 Midnight TR Timber S3 Edelweiss FU Ivory SL Stone S5 Ebony KG Snow White Ref. Optional accessories / spare parts 9849 00 K1 Salad basket, stainless steel 76,- 9K08 00 K1 Rolling mat, stainless steel 74,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 8286 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 9218 03 00 Fastening set 22,- 370 370 143 Required size of worktop 3325 see attached template (Ref. 9307 L0 A4) Please refer to the assembly instructions Required size of worktop: see attached template (Ref. 9307 L0 A4) 52

SUBWAY 45 SU Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 45 cm Possible combinations undercounter see pages 106/107 Ref. Description (for XX, please enter colour number) Classicline Premiumline 3324 01 XX Sink inclusive Waste system basket strainer 319,00 355,00 3324 02 XX Sink inclusive Waste system pop-up 366,00 402,00 Classicline i2 Cappuccino KD Fossil i5 Sand R1 White (alpin) Premiumline J0 Chromit 50 Emerald 07 Sunrise UNDERCOUNTER SINKS KR Cream i4 Graphite SM Steam 51 Coral 26 Midnight TR Timber S3 Edelweiss FU Ivory SL Stone S5 Ebony KG Snow White Ref. Optional accessories / spare parts 9850 00 K1 Salad basket, stainless steel 76,- 9K08 00 K1 Rolling mat, stainless steel 74,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 8286 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 9218 03 00 Fastening set 22,- 370 300 143 Required size of worktop 3324 see attached template (Ref. 9307 L1 A4) Please refer to the assembly instructions Required size of worktop: see attached template (Ref. 9307 L1 A4) 53

SUBWAY 60 FLAT Available with bowl on the right or left-hand side For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm Natural stone countertop: min. 4 cm thick Registered design Ref. Description (for XX, please enter colour number) Classicline Premiumline 6712 1F XX Sink bowl right inclusive Waste system basket strainer 542,00 610,00 6770 1F XX Sink bowl left inclusive Waste system basket strainer 542,00 610,00 6712 2F XX Sink bowl right inclusive Waste system pop-up 579,00 647,00 6770 2F XX Sink bowl left inclusive Waste system pop-up 579,00 647,00 Classicline Premiumline KR Cream i4 Graphite J0 Chromit TR Timber FLUSH-MOUNTED SINKS S3 Edelweiss KD Fossil FU Ivory R1 White (alpin) S5 Ebony Ref. Optional accessories / spare parts 8K04 10 00 Accessory set consisting of : - a universal cutting board made of beech - a stainless steel salad basket KG Snow White 76,- 335 325 140 550 280 42 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8214 00 61 Waste system basket strainer, chrome (included) 46,- 325 115 80 8215 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- 9220 58 00 Montage set (included) 12,- View of holes for tap fittings 6712 6712 6770 6770 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. 54 Please refer to the assembly instructions and cut-out dimensions of the countertop on page XX!

SUBWAY 60 S FLAT For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm Natural stone countertop: min. 3 cm thick Ref. Description (for XX, please enter colour number) Classicline Premiumline 3309 1F XX Sink inclusive Waste system basket strainer 459,00 516,00 3309 2F XX Sink inclusive Waste system pop-up 506,00 563,00 Classicline Premiumline KR Cream i4 Graphite J0 Chromit 50 Emerald 07 Sunrise S3 Edelweiss KD Fossil FU Ivory R1 White (alpin) 51 Coral S5 Ebony Ref. Optional accessories / spare parts 8K09 10 00 Accessory set consisting of : - a universal cutting board made of beech - a stainless steel salad basket 26 Midnight KG Snow White 76,- TR Timber 550 280 42 FLUSH-MOUNTED SINKS 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 325 115 80 8286 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- 9220 58 00 Montage set (included) 12,- View of holes for tap fittings 3309 3309 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions and cut-out dimensions of the countertop on page XX! 55

SUBWAY 60 XL FLAT Available with bowl on the right or left-hand side For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm Natural stone countertop: min. 4 cm thick Ref. Description (for XX, please enter colour number) Classicline Premiumline 6719 1F XX Sink bowl right inclusive Waste system basket strainer 511,00 576,00 6718 1F XX Sink bowl left inclusive Waste system basket strainer 511,00 576,00 6719 2F XX Sink bowl right inclusive Waste system pop-up 558,00 623,00 6718 2F XX Sink bowl left inclusive Waste system pop-up 558,00 623,00 Classicline Premiumline KR Cream i4 Graphite J0 Chromit TR Timber FLUSH-MOUNTED SINKS S3 Edelweiss KD Fossil FU Ivory R1 White (alpin) S5 Ebony Ref. Optional accessories / spare parts 8K09 10 00 Accessory set consisting of : - a universal cutting board made of beech - a stainless steel salad basket KG Snow White 76,- 550 280 42 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 325 115 80 8286 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- 9220 58 00 Montage set (included) 12,- View of holes for tap fittings 6719 6719 6718 475 6718 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. 56 Please refer to the assembly instructions and cut-out dimensions of the countertop on page XX!

SUBWAY 60 XM FLAT For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm Natural stone countertop: min. 3 cm thick Ref. Description (for XX, please enter colour number) Classicline Premiumline 6780 1F XX Sink inclusive Waste system basket strainer 455,00 510,00 6780 2F XX Sink inclusive Waste system pop-up 492,00 547,00 Classicline Premiumline KR Cream i4 Graphite J0 Chromit TR Timber S3 Edelweiss FU Ivory S5 Ebony KD Fossil R1 White (alpin) Ref. Optional accessories / spare parts 8K04 10 00 Accessory set consisting of : - a universal cutting board made of beech - a stainless steel salad basket KG Snow White 76,- 335 325 140 550 280 42 FLUSH-MOUNTED SINKS 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8214 00 61 Waste system basket strainer, chrome (included) 46,- 325 115 80 8215 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- 9220 58 00 Montage set (included) 12,- View of holes for tap fittings 6780 6780 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions and cut-out dimensions of the countertop on page XX! 57

SUBWAY 60 XR FLAT Available with bowl on the right or left-hand side For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm 2 basins, closable Natural stone countertop: min. 4 cm thick Ref. Description (for XX, please enter colour number) Classicline Premiumline 6721 1F XX Sink bowl right inclusive Waste system basket strainer 533,00 597,00 6720 1F XX Sink bowl left inclusive Waste system basket strainer 533,00 597,00 6721 2F XX Sink bowl right inclusive Waste system pop-up 571,00 635,00 6720 2F XX Sink bowl left inclusive Waste system pop-up 571,00 635,00 Classicline Premiumline KR Cream i4 Graphite J0 Chromit TR Timber FLUSH-MOUNTED SINKS S3 Edelweiss KD Fossil FU Ivory R1 White (alpin) S5 Ebony Ref. Optional accessories / spare parts 8K05 10 00 Accessory set consisting of : - a universal cutting board made of beech - a stainless steel salad basket KG Snow White 76,- 275 325 140 550 280 42 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8223 00 61 Waste system basket strainer, chrome (included) 62,- 325 115 80 8226 00 61 Waste system pop-up, chrome (included) 100,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 05 61 Cover cap for turn lever for 9405 04 / 9405 08, chrome 16,- 9405 05 LB Cover cap for turn lever for 9405 04 / 9405 08, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- 9220 58 00 Montage set (included) 12,- View of holes for tap fittings 6721 6721 6720 6720 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. 58 Please refer to the assembly instructions and cut-out dimensions of the countertop on page XX!

TIMELINE 60 FLAT The sink is reversible For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm Natural stone countertop: min. 4 cm thick Ref. Description (for XX, please enter colour number) Classicline Premiumline 6790 1F XX Sink inclusive Waste system basket strainer 560,00 632,00 6790 2F XX Sink inclusive Waste system pop-up 607,00 679,00 Classicline Premiumline KR Cream i4 Graphite J0 Chromit 50 Emerald 07 Sunrise S3 Edelweiss KD Fossil FU Ivory R1 White (alpin) 51 Coral S5 Ebony Ref. Optional accessories / spare parts 8K14 00 00 Accessory set consisting of : 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 26 Midnight KG Snow White 403 TR Timber 379 150 550 280 42 FLUSH-MOUNTED SINKS 8276 00 61 Waste system basket strainer, chrome (included) 36,- 8286 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 9220 58 00 Montage set (included) 12,- View of holes for tap fittings 6790 6790 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions and cut-out dimensions of the countertop on page XX! 59

SUBWAY 50 FLAT For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 50 cm Natural stone countertop: min. 4 cm thick Registered design Ref. Description (for XX, please enter colour number) Classicline Premiumline 6713 1F XX Sink bowl right inclusive Waste system basket strainer 483,00 542,00 6773 1F XX Sink bowl left inclusive Waste system basket strainer 483,00 542,00 6713 2F XX Sink bowl right inclusive Waste system pop-up 520,00 579,00 6773 2F XX Sink bowl left inclusive Waste system pop-up 520,00 579,00 Classicline Premiumline KR Cream i4 Graphite J0 Chromit TR Timber FLUSH-MOUNTED SINKS S3 Edelweiss KD Fossil FU Ivory R1 White (alpin) S5 Ebony Ref. Optional accessories / spare parts 8K05 10 00 Accessory set consisting of : - a universal cutting board made of beech - a stainless steel salad basket KG Snow White 76,- 275 325 140 550 280 42 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8214 00 61 Waste system basket strainer, chrome (included) 46,- 325 115 80 8215 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- 9220 58 00 Montage set (included) 12,- View of holes for tap fittings 6713 6713 6773 6773 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. 60 Please refer to the assembly instructions and cut-out dimensions of the countertop on page XX!

SUBWAY 50 S FLAT For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 50 cm Natural stone countertop: min. 3 cm thick Ref. Description (for XX, please enter colour number) Classicline Premiumline 3315 1F XX Sink inclusive Waste system basket strainer 420,00 471,00 3315 2F XX Sink inclusive Waste system pop-up 467,00 518,00 Classicline Premiumline KR Cream i4 Graphite J0 Chromit 50 Emerald 07 Sunrise S3 Edelweiss KD Fossil FU Ivory R1 White (alpin) 51 Coral S5 Ebony Ref. Optional accessories / spare parts 8K99 10 00 Accessory set consisting of : - a universal cutting board made of beech - a stainless steel salad basket 26 Midnight KG Snow White 76,- 320 TR Timber 370 143 550 280 42 FLUSH-MOUNTED SINKS 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 325 115 80 8286 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- 9220 58 00 Montage set (included) 12,- View of holes for tap fittings 3315 3315 1 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions 61

TIMELINE 50 FLAT The sink is reversible For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 50 cm Natural stone countertop: min. 4 cm thick Ref. Description (for XX, please enter colour number) Classicline Premiumline 3307 1F XX Sink inclusive Waste system basket strainer 506,00 570,00 3307 2F XX Sink inclusive Waste system pop-up 553,00 617,00 Classicline Premiumline KR Cream i4 Graphite J0 Chromit 50 Emerald 07 Sunrise FLUSH-MOUNTED SINKS S3 Edelweiss KD Fossil FU Ivory R1 White (alpin) 51 Coral S5 Ebony Ref. Optional accessories / spare parts 8K29 10 00 Accessory set consisting of : 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 26 Midnight KG Snow White TR Timber 550 280 42 8276 00 61 Waste system basket strainer, chrome (included) 36,- 8286 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 9220 58 00 Montage set (included) 12,- View of holes for tap fittings 3307 3307 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions and cut-out dimensions of the countertop on page XX! 62

SUBWAY 45 FLAT Available with bowl on the right or left-hand side For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 45 cm Natural stone countertop: min. 4 cm thick Registered design Ref. Description (for XX, please enter colour number) Classicline Premiumline 6714 1F XX Sink bowl right inclusive Waste system basket strainer 464,00 522,00 6772 1F XX Sink bowl left inclusive Waste system basket strainer 464,00 522,00 6714 2F XX Sink bowl right inclusive Waste system pop-up 511,00 569,00 6772 2F XX Sink bowl left inclusive Waste system pop-up 511,00 569,00 Classicline Premiumline KR Cream i4 Graphite J0 Chromit TR Timber S3 Edelweiss KD Fossil FU Ivory R1 White (alpin) S5 Ebony Ref. Optional accessories / spare parts 8K06 10 00 Accessory set consisting of : - a universal cutting board made of beech - a stainless steel salad basket KG Snow White 76,- 350 325 140 550 280 42 FLUSH-MOUNTED SINKS 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 325 115 80 8286 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- 9220 58 00 Montage set (included) 12,- View of holes for tap fittings 6714 6714 6772 6772 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions and cut-out dimensions of the countertop on page XX! 63

SUBWAY 45 XS FLAT For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 45 cm Natural stone countertop: min. 3 cm thick Ref. Description (for XX, please enter colour number) Classicline Premiumline 6781 1F XX Sink inclusive Waste system basket strainer 409,00 459,00 6781 2F XX Sink inclusive Waste system pop-up 456,00 506,00 Classicline Premiumline KR Cream i4 Graphite J0 Chromit 50 Emerald 07 Sunrise FLUSH-MOUNTED SINKS S3 Edelweiss KD Fossil FU Ivory R1 White (alpin) 51 Coral S5 Ebony Ref. Optional accessories / spare parts 8K06 10 00 Accessory set consisting of : - a universal cutting board made of beech - a stainless steel salad basket 26 Midnight KG Snow White 76,- 350 TR Timber 325 140 550 280 42 9K08 00 K1 Rolling mat, stainless steel 74,- 9K04 00 K1 Inset strainer, stainless steel 54,- 8276 00 61 Waste system basket strainer, chrome (included) 36,- 325 115 80 8286 00 61 Waste system pop-up, chrome (included) 83,- 8K33 10 00 Cutting board 95,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 8K34 00 K1 Strainer bowl, stainless steel 73,- 9220 58 00 Montage set (included) 12,- View of holes for tap fittings 6781 6781 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions and cut-out dimensions of the countertop on page XX! 64

TIMELINE 45 FLAT The sink is reversible For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 45 cm Natural stone countertop: min. 4 cm thick Ref. Description (for XX, please enter colour number) Classicline Premiumline 6791 1F XX Sink inclusive Waste system basket strainer 495,00 557,00 6791 2F XX Sink inclusive Waste system pop-up 542,00 604,00 Classicline Premiumline KR Cream i4 Graphite J0 Chromit 50 Emerald 07 Sunrise S3 Edelweiss KD Fossil FU Ivory R1 White (alpin) 51 Coral S5 Ebony Ref. Optional accessories / spare parts 8K15 00 00 Accessory set consisting of : 76,- - a universal cutting board made of beech - a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 74,- 26 Midnight KG Snow White 390 TR Timber 277 182 550 280 42 FLUSH-MOUNTED SINKS 8276 00 61 Waste system basket strainer, chrome (included) 36,- 8286 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 9220 58 00 Montage set (included) 12,- View of holes for tap fittings 6791 6791 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions and cut-out dimensions of the countertop on page XX! 65

MONUMENTUM Corner element Installation on a corner undersink cabinet with 90 cm side length Minimum width of undersink cabinet: 90 cm 2 basins, closable Ref. Description (for XX, please enter colour number) Classicline Premiumline 3303 01 XX Corner element inclusive Waste system basket strainer and Fastening set 882,00 998,00 3303 02 XX Corner element inclusive Waste system pop-up and Fastening set 919,00 1.035,00 Classicline Premiumline i2 Cappuccino KD Fossil i5 Sand R1 White alpin J0 Chromit TR Timber KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG Snow White MODULES AND ECO SINKS Ref. Optional accessories / spare parts 8K25 00 K1 Salad basket, stainless steel 76,- 8K18 00 61 Waste system basket strainer, chrome (included) 46,- 8K19 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 05 61 Cover cap for turn lever for 9405 04 / 9405 08, chrome 16,- 9405 05 LB Cover cap for turn lever for 9405 04 / 9405 08, stainless steel finish (included) 32,- 9208 46 00 Fastening set (included) 19,- View of holes for tap fittings 3303 3303 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. The tap holes marked with an are punched through as standard at the factory. Hole 6 cannot be used for the pop-up waste * unglazed edge 66

BUTLER 90 Assembly on a vanity unit or wall-mounted Minimum width of undersink cabinet: 90 cm 2 basins, closable Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline 6323 91 XX Double-bowl sink inclusive Strainer bowl, Waste system basket strainer and Fastening set for installation with cabinet 6323 92 XX Double-bowl sink inclusive Strainer bowl, Waste system pop-up and Fastening set for installation with cabinet 613,00 684,00 732,00 650,00 721,00 769,00 Classicline Premiumline Trendline i2 Cappuccino KD* Fossil i5 Sand R1 White S5 Ebony TR* Timber KT Decor white Pearl alpin (on the tap hole surface) KR Cream i4 Graphite SM Steam J0* Chromit S3 Edelweiss FU Ivory SL Stone KG* Snow White * The colours KD, J0, KG and TR: Made to order, delivery time six weeks plus Ref. Optional accessories / spare parts 385 330 8341 00 K1 Salad basket for double-bowl sink 6323, stainless steel 76,- 8262 00 61 Waste system basket strainer, chrome (included) 46,- 8232 00 61 Waste system pop-up, chrome (included) 83,- 9405 05 61 Cover cap for turn lever for 9405 04 / 9405 08, chrome 16,- 9405 05 LB Cover cap for turn lever for 9405 04 / 9405 08, stainless steel finish (included) 32,- 8323 00 K2 Strainer bowl, transparent (included) 25,- 9208 49 00 Fastening set for installation with cabinet (included) 24,- 150 MODULES AND ECO SINKS View of holes for tap fittings 6323 6323 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. * unglazed edge 67

BUTLER 60 Assembly on a vanity unit or wall-mounted Minimum width of undersink cabinet: 60 cm Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline 6320 61 XX Single-bowl sink inclusive Waste system basket strainer and Fastening set for installation with cabinet 375,00 416,00 443,00 6320 62 XX Single-bowl sink inclusive Waste system pop-up and Fastening set for installation with cabinet 422,00 463,00 490,00 Classicline Premiumline Trendline i2 Cappuccino KD* Fossil i5 Sand R1 White J0* Chromit TR* Timber KT Decor white Pearl alpin (on the tap hole surface) KR Cream i4 Graphite SM Steam S5 Ebony S3 Edelweiss FU Ivory SL Stone KG* Snow White MODULES AND ECO SINKS * The colours KD, J0, KG and TR: Made to order, delivery time six weeks plus Ref. Optional accessories / spare parts 8270 00 61 Waste system basket strainer, chrome (included) 36,- 8233 00 61 Waste system pop-up, chrome (included) 83,- 9236 10 LC Soap dispenser, stainless steel massive 120,- 9236 10 LE Soap dispenser, stainless steel massive polished 120,- 9405 06 61 Cover cap for turn lever for 9405 03 / 9405 07, chrome 16,- 9405 06 LB Cover cap for turn lever for 9405 03 / 9405 07, stainless steel finish (included) 32,- 9208 49 00 Fastening set for installation with cabinet (included) 24,- View of holes for tap fittings 6320 6320 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. * unglazed edge 68

FARMHOUSE 90 Registered design Ref. Description (for XX, please enter colour number) 01 6332 95 XX Double-bowl sink 383,00 Classicline 01 White alpin Ref. Optional accessories / spare parts 8231 00 61 Waste system basket strainer, chrome (included) 46,- MODULES AND ECO SINKS 6332 230 125 90 550 510 855 900 200 220 Please refer to the assembly instructions 69

FARMHOUSE 80 Registered design Ref. Description (for XX, please enter colour number) 01 6331 95 XX Double-bowl sink 349,00 Classicline 01 White alpin Ref. Optional accessories / spare parts 8231 00 61 Waste system basket strainer, chrome (included) 46,- MODULES AND ECO SINKS 6331 Please refer to the assembly instructions 70

FARMHOUSE 60 Registered design Ref. Description (for XX, please enter colour number) 01 6322 95 XX Sink 234,00 Classicline 01 White alpin Ref. Optional accessories / spare parts 8231 00 61 Waste system basket strainer, chrome (included) 46,- MODULES AND ECO SINKS 6322 Please refer to the assembly instructions 71

TUDOR The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 50 cm Registered design Ref. Description (for XX, please enter colour number) Classicline Premiumline 6761 03 XX Sink inclusive Waste system, plug and chain 205,00 233,00 6761 01 XX Sink inclusive Waste system basket strainer 215,00 242,00 Classicline 01 White alpin Premiumline 31 Cappuccino 73 Sand Ref. Optional accessories / spare parts 9428 00 61 Waste system, plug and chain, chrome 32,- 8212 00 61 Waste system basket strainer, chrome (included) 42,- MODULES AND ECO SINKS 6761 Please refer to the assembly instructions Required size of worktop : 88 x 46 cm 72

MOGADOR The sink is reversible Minimum width of undersink cabinet: 50 cm Registered design Ref. Description (for XX, please enter colour number) Classicline Premiumline 6738 03 XX Sink inclusive Waste system, plug and chain 222,00 251,00 Classicline 01 White alpin Premiumline 31 Cappuccino 73 Sand Ref. Optional accessories / spare parts 9496 00 61 Waste system, plug and chain, chrome 21,- MODULES AND ECO SINKS View of holes for tap fittings 6738 6738 When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 5,00 /model. Please refer to the assembly instructions 73

NESTOR PLUS The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 80 cm Registered design Ref. Description (for XX, please enter colour number) Classicline Premiumline 3391 01 XX Sink inclusive Waste system basket strainer 264,00 297,00 Classicline 01 White alpin Premiumline 31 Cappuccino 73 Sand Ref. Optional accessories / spare parts 8K22 00 61 Waste system basket strainer, chrome (included) 46,- MODULES AND ECO SINKS 3391 Please refer to the assembly instructions Required size of worktop : 108,5 x 46 cm 74

WINDSOR PLUS The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 80 cm Registered design Ref. Description (for XX, please enter colour number) Classicline Premiumline 3390 01 XX Sink inclusive Sink and Waste system basket strainer 285,00 317,00 Classicline 01 White alpin Premiumline 31 Cappuccino 73 Sand Ref. Optional accessories / spare parts 8K22 00 61 Waste system basket strainer, chrome (included) 46,- MODULES AND ECO SINKS 3390 Please refer to the assembly instructions 75

CERAMIC SINKS WITHOUT WASTE SYSTEMS SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline 3350 00 XX Architectura 50, Sink 338,00 382,00 3360 00 XX Architectura 60, Sink 380,00 431,00 6729 00 XX Arena Corner, Corner sink with additional outlet in the draining board 587,00 669,00 6320 00 XX Butler 60 315,00 356,00 383,00 6323 00 XX Butler 90 518,00 589,00 637,00 6707 00 XX Cisterna 26, Undercounter sink 228,00 256,00 6704 00 XX Cisterna 45, Undercounter sink 346,00 392,00 6703 00 XX Cisterna 50, Undercounter sink 366,00 415,00 6702 00 XX Cisterna 60B, Undercounter sink 367,00 416,00 6706 00 XX Cisterna 60C, Undercounter sink 399,00 452,00 6745 00 XX Condor 45, Sink 364,00 412,00 6759 00 XX Condor 60, Sink 446,00 507,00 6746 00 XX Condor 80, Sink 543,00 618,00 3306 00 XX Flavia 45, Sink 372,00 421,00 3305 00 XX Flavia 50, Sink 394,00 447,00 3304 00 XX Flavia 60, Sink 486,00 553,00 6778 00 XX Laola 50, Sink 429,00 487,00 6792 00 XX Metric Art 60, Sink 716,00 817,00 6738 00 XX Mogador, Sink 201,00 227,00 3303 00 XX Monumentum, Corner element 817,00 933,00 3391 00 XX Nestor Plus, Sink 218,00 245,00 6716 00 XX NewWave 60, Sink 508,00 578,00 6708 00 XX Solo Corner, Corner sink 518,00 589,00 3312 00 XX Subway 45 Compact, Sink bowl left 355,00 402,00 3313 00 XX Subway 45 Compact, Sink bowl right 355,00 402,00 6772 0F XX Subway 45 flat, Sink bowl left 428,00 486,00 6714 0F XX Subway 45 flat, Sink bowl right 428,00 486,00 3324 00 XX Subway 45 SU, Sink 283,00 319,00 6781 0F XX Subway 45 XS flat, Sink 373,00 423,00 6781 00 XX Subway 45 XS, Sink 355,00 402,00 6772 00 XX Subway 45, Sink bowl left 407,00 462,00 498,00 6714 00 XX Subway 45, Sink bowl right 407,00 462,00 498,00 6773 0F XX Subway 50 flat, Sink bowl left 437,00 496,00 6713 0F XX Subway 50 flat, Sink bowl right 437,00 496,00 3315 0F XX Subway 50 S flat, Sink 384,00 435,00 3315 00 XX Subway 50 S, Sink 312,00 352,00 3325 00 XX Subway 50 SU, Sink 310,00 350,00 6773 00 XX Subway 50, Sink bowl left 415,00 471,00 508,00 6713 00 XX Subway 50, Sink bowl right 415,00 471,00 508,00 6770 0F XX Subway 60 flat, Sink bowl left 496,00 564,00 6712 0F XX Subway 60 flat, Sink bowl right 496,00 564,00 3309 0F XX Subway 60 S flat, Sink 423,00 480,00 3309 00 XX Subway 60 S, Sink 345,00 390,00 3310 00 XX Subway 60 SU, Sink 362,00 410,00 6718 0F XX Subway 60 XL flat, Sink bowl left 475,00 540,00 6719 0F XX Subway 60 XL flat, Sink bowl right 475,00 540,00 6718 00 XX Subway 60 XL, Sink bowl left 475,00 540,00 583,00 6719 00 XX Subway 60 XL, Sink bowl right 475,00 540,00 583,00 6780 0F XX Subway 60 XM flat, Sink 409,00 464,00 6780 00 XX Subway 60 XM, Sink 389,00 441,00 6720 0F XX Subway 60 XR flat, Sink bowl left 471,00 535,00 6721 0F XX Subway 60 XR flat, Sink bowl right 471,00 535,00 6720 00 XX Subway 60 XR, Sink bowl left 471,00 535,00 578,00 6721 00 XX Subway 60 XR, Sink bowl right 471,00 535,00 578,00 6758 00 XX Subway 60 XU, Sink 376,00 426,00 6770 00 XX Subway 60, Sink bowl left 496,00 564,00 609,00 6712 00 XX Subway 60, Sink bowl right 496,00 564,00 609,00 6726 00 XX Subway 80, Sink 552,00 628,00 6771 00 XX Targa 50, Sink 239,00 270,00 6753 00 XX Targa 60, Sink 267,00 293,00 6752 00 XX Targa 80, Sink 310,00 350,00 6791 0F XX Timeline 45 flat, Sink 459,00 521,00 6791 00 XX Timeline 45, Sink 437,00 496,00 536,00 3307 0F XX Timeline 50 flat, Sink 470,00 534,00 3307 00 XX Timeline 50, Sink 449,00 510,00 551,00 6790 00 XX Timeline 60, Sink 510,00 580,00 627,00 6761 00 XX Tudor, Sink 173,00 196,00 3390 00 XX Windsor Plus, Sink 239,00 266,00 76

TAP FITTINGS ADVANTAGES Technology meets environmental awareness meets design. Selected tap fitting models from Villeroy & Boch feature modern water- and energy-saving functions. Cutting-edge technology is not the only consideration, however: the Amy, Arion, Como and Como Shower tap fittings are available in all kitchen ceramics colours, for example, for perfect colour coordination. Flexibility Como-Window the intelligent solution for sinks positioned directly in front of the window is also available with spray head. Save water Progressively save water (ECO function) thanks to the intelligent spring mechanism. TAP FITTINGS Colour coding The coloured tap fittings are the ideal complement to your ceramic sink. Save energy Thanks to the intelligent spring control, energy consumption can be reduced by up to 35% (e-tap). Functionality The spray head can be set to either normal or spray jet. Comfort A retractable spray head further enhances everyday comfort when working at the kitchen sink. 77

ALORO / STEEL EXPERT Aloro Ref. Description 9274 00 L0 Platin 439,- 9274 00 L2 Black 439,- Steel Expert Ref. Description 9265 00 LC stainless steel massive 371,- TAP FITTINGS 9274 00 Mix of anodised aluminium, zamak and stainless steel Cartridge material: ceramic Swivel range: 110 Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 7,0 l/min Flexible connection hoses 9265 00 Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 6,5 l/min Flexible connection hoses Flexible, removable, hand-held spray head Can be switched from water flow to spray 78

COMO / COMO SHOWER Como Ref. Description 9251 00 LC stainless steel massive 217,- 9251 00 LE stainless steel massive polished 217,- 9251 00 XX all colours 290,- Como Shower Ref. Description 9252 00 LC stainless steel massive 288,- 9252 03 XX Body: stainless steel massive Spray: all ceramic colours 9252 00 LE stainless steel massive polished 288,- 390,- TAP FITTINGS 9251 00 Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 14,0 l/min Flexible connection hoses 9252 00 9252 03 Material: solid stainless steel Hand-spray fitting: integrated, retractable Swivel range: 120 Hose length of hand-held spray head: 102 cm Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 11,0 l/min Flexible connection hoses 79

COMO SWITCH / COMO X Como Switch Ref. Description 9272 00 LC stainless steel massive 336,- 9272 00 LE stainless steel massive polished 336,- Como X Ref. Description 9275 00 LC stainless steel massive 291,- TAP FITTINGS 9272 00 Material: solid stainless steel Hand-spray fitting: integrated, retractable Swivel range: 120 Hose length of hand-held spray head: 150 cm Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 8,0 l/min Flexible connection hoses Can be switched from water flow to spray 9275 00 Material: solid stainless steel Cartridge material: ceramic Swivel range: 360 Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 9,0 l/min Flexible connection hoses 80

COMO STYLE / COMO SHOWER STYLE Como Style Ref. Description 9259 00 LC stainless steel massive 291,- 9259 00 LE stainless steel massive polished 291,- Como Shower Style Ref. Description 9260 00 LC stainless steel massive 340,- 9260 00 LE stainless steel massive polished 340,- TAP FITTINGS 9259 00 Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 14,0 l/min Flexible connection hoses 9260 00 Material: solid stainless steel Hand-spray fitting: integrated, retractable Swivel range: 120 Hose length of hand-held spray head: 102 cm Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 10,0 l/min Flexible connection hoses 81

COMO WINDOW / COMO SHOWER WINDOW Como Window Ref. Description 9257 00 LC stainless steel massive 250,- Como Shower Window Ref. Description 9258 00 LC stainless steel massive 329,- TAP FITTINGS 9257 00 Material: solid stainless steel Cartridge material: ceramic Swivel range: 120 Opening angle of lever: 25 Mixing angle of lever: 90 Flexible connection hoses, length 75 cm Flow volume: 12,0 l/min Height of base with extended tap fitting: 35 mm 9258 00 Material: solid stainless steel (head and holder) Cartridge material: ceramic Swivel range: 120 Opening angle of lever: 25 Mixing angle of lever: 90 Flexible connection hoses, length 75 cm Flow volume: 8,0 l/min Height of base with extended tap fitting: 35 mm Retraction of spray head by means of hose weight Hand-spray fitting: integrated, retractable 82

FINERA / FINERA SQUARE Finera Ref. Description 9270 00 LC stainless steel massive 316,- Finera Square Ref. Description 9271 00 LC stainless steel massive 316,- TAP FITTINGS 9270 00 Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 10,0 l/min Flexible connection hoses Swivel perlator 9271 00 Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 10,0 l/min Flexible connection hoses Swivel perlator 83

SORANO / SORANO SHOWER Sorano Ref. Description 9266 00 LC stainless steel massive 212,- Sorano Shower Ref. Description 9268 00 LC stainless steel massive 282,- TAP FITTINGS 9266 00 Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 9,0 l/min Flexible connection hoses Swivel perlator 9268 00 Material: solid stainless steel Hand-spray fitting: integrated, retractable Swivel range: 360 Hose length of hand-held spray head: 102 cm Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 9,0 l/min Flexible connection hoses Swivel perlator 84

SORANO SKY / SORANO SHOWER SKY Sorano Sky Ref. Description 9267 00 LC stainless steel massive 285,- Sorano Shower Sky Ref. Description 9269 00 LC stainless steel massive 332,- TAP FITTINGS 9267 00 Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 9,0 l/min Flexible connection hoses Swivel perlator 9269 00 Material: solid stainless steel Hand-spray fitting: integrated, retractable Swivel range: 360 Hose length of hand-held spray head: 102 cm Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 9,0 l/min Flexible connection hoses Swivel perlator 85

MODERN STEEL / STEEL SHOWER Modern Steel Ref. Description 9668 01 LC stainless steel massive 331,- 9668 01 LE stainless steel massive polished 331,- Steel Shower Ref. Description 9697 01 LC stainless steel massive 373,- TAP FITTINGS 9668 01 Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 14,0 l/min Flexible connection hoses 9697 01 Material: solid stainless steel Hand-spray fitting: integrated, retractable Swivel range: 360 Hose length of hand-held spray head: 70 cm Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 11,0 l/min Flexible connection hoses 86

UMBRELLA / UMBRELLA FLEX Umbrella Ref. Description 9253 00 LC stainless steel massive 276,- 9253 00 LE stainless steel massive polished 276,- Umbrella Flex Ref. Description 9254 00 LC stainless steel massive 331,- 9254 00 LE stainless steel massive polished 331,- TAP FITTINGS 9253 00 Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 14,0 l/min Flexible connection hoses 9254 00 Material: solid stainless steel Hand-spray fitting: integrated, retractable Swivel range: 360 Hose length of hand-held spray head: 60 cm Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 11,0 l/min Flexible connection hoses 87

ARTIST / AVIA ARTist Ref. Description 9255 00 LC stainless steel massive 396,- Avia Ref. Description 9241 00 LC stainless steel massive 346,- 9241 00 LE stainless steel massive polished 346,- 9241 00 LF Stainless steel massive, aura 398,- TAP FITTINGS 9255 00 Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 14,0 l/min Flexible connection hoses 9241 00 Material: solid stainless steel Cartridge material: ceramic Swivel range: 360 Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 13,0 l/min Flexible connection hoses 88

COSI / COSI SKY Cosi Ref. Description 9263 00 LC stainless steel massive 206,- 9263 00 LE stainless steel massive polished 206,- Cosi Sky Ref. Description 9264 00 LC stainless steel massive 288,- 9264 00 LE stainless steel massive polished 288,- TAP FITTINGS 9263 00 Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 12,0 l/min Flexible connection hoses Swivel perlator 9264 00 Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 12,0 l/min Flexible connection hoses Swivel perlator 89

AMY / ARION Amy Ref. Description 8279 00 61 chrome 213,- 8279 00 LB stainless steel finish 329,- 8279 00 XX all colours 275,- Arion Ref. Description 8278 00 61 chrome 285,- 8278 00 LB stainless steel finish 424,- 8278 00 XX all colours 383,- Colour selection (for XX, please enter colour number) Classicline i2 Cappuccino KD Fossil i5 Sand Premiumline J0 Chromit TR Timber KR Cream i4 Graphite R1 White alpin S5 Ebony S3 Edelweiss FU Ivory KG Snow White TAP FITTINGS 8279 00 Material: brass Swivel range: 110 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 12,0 l/min Flexible connection hoses 8278 00 Material: brass Swivel range: 110 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 12,0 l/min Flexible connection hoses Energy-saving function (e-tap) can be activated Water-saving function (EcoFunktion) can be activated Energy-saving function (e-tap) can be activated Water-saving function (EcoFunktion) can be activated 90

PRIMARA / SOAP DISPENSER Primara Ref. Description 9242 02 XX Body: stainless steel massive Spray: all ceramic colours 9242 00 LC stainless steel massive 340,- 408,- Soap dispenser Ref. Description 9236 10 LC stainless steel massive 120,- 9236 10 LE stainless steel massive polished 120,- Colour selection (for XX, please enter colour number) Classicline i2 Cappuccino KD Fossil i5 Sand Premiumline J0 Chromit TR Timber KR Cream i4 Graphite R1 White alpin S5 Ebony S3 Edelweiss FU Ivory KG Snow White TAP FITTINGS 9242 00 9242 02 Material: solid stainless steel Can be switched from water flow to spray Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flexible connection hoses Flow volume: 11,0 l/min Swivel range: 110 Hand-spray fitting: integrated, retractable Hose length of hand-held spray head: 105 cm 9236 10 Material: solid stainless steel (head and holder) Filling quantity: 250 ml 91

SOAP DISPENSER / SOAP DISPENSER Soap dispenser Ref. Description 9236 20 LC stainless steel massive 120,- Soap dispenser Ref. Description 9236 30 LC stainless steel massive 129,- TAP FITTINGS 9236 20 9236 30 Material: stainless steel (head), plastic (holder) Filling quantity: 250 ml Material: stainless steel (head), plastic (holder) Filling quantity: 250 ml 92

HIGH QUALITY ACCESSORIES FROM VILLEROY&BOCH In hardly any other room of the house are materials subjected to the stresses found in the kitchen. That s why Villeroy & Boch has extremely strict standards for the quality of the materials it uses. Work s more fun with the right equipment: So customise your sink to suit your requirements by adding accessories such as wire baskets or strainers, hanging bowls or chopping boards. This makes it possible to better coordinate each step of the process. Stainless steel hanging bowl and walnut (real-wood veneer with compact core) cutting board complement each other to perfection for even greater comfort when preparing food. Stainless steel roll-up rack Diverse uses as draining board and surface protection. Stainless steel inset strainer and wire basket Practical protection when washing up and preparing food Universal cutting board Stays in place for comfortable working at the sink, draining board or worktop. SPARE PARTS Turn knob In chrome or stainless steel to match your tap fitting. Selection of stainless steel soap dispensers Elegant solution for soap or washing-up liquid. 93

ACCESSORIES Rolling mat, stainless steel Reference universally applicable 9K08 00 K1 74,- Universal cutting board made of beech For sinks: 3304, 3305, 3306, 3307, 3309, 3312, 3313, 3315, 3350, 3360, 6712, 6713, 6714, 6718, 6719, 6720, 6721, 6726, 6732, 6745, 6746, 6759, 6770, 6772, 6773, 6777, 6778, 6780, 6781, 6790, 6791 8K00 10 00 66,- 550 280 42 Cutting board walnut For the Subway sinks: 3309, 3312, 3313, 3315, 6712, 6713, 6714, 6718, 6719, 6720, 6721, 6770, 6772, 6773, 6780, 6781 8K33 10 00 95,- Strainer bowl, stainless steel For sinks: 3309, 3312, 3313, 3315, 6712, 6713, 6714, 6718, 6719, 6720, 6721, 6770, 6772, 6773, 6780, 6781 8K34 00 K1 73,- Inset strainer, stainless steel For sinks: 3309, 3312, 3313, 3315, 6712, 6713, 6714, 6718, 6719, 6720, 6721, 6770, 6772, 6773, 6780, 6781 9K04 00 K1 54,- 325 115 80 Inset strainer, stainless steel For sinks: 6759, 6792 8345 47 K1 70,- 375 190 50 Strainer bowl, stainless steel SPARE PARTS For sinks: 3305, 3306 8K24 00 K1 74,- Strainer bowl, stainless steel For sinks: 3304 8K23 00 K1 93,- 94

ACCESSORIES Salad basket, stainless steel Reference for Arena Corner 6729 8349 00 K1 76,- for Cisterna 60C 6706, Subway 60 SU 3310 8397 00 K1 76,- for Cisterna 60B 6702, Subway 50 S 3315, Subway 50 S flat 3315, Subway 60 XU 6758 9841 00 K1 76,- NOTE: For ranges that have already been discontinued, please contact Customer Service for Cisterna 50 6703, Subway 50 SU 3325 9849 00 K1 76,- for Cisterna 45 6704, Subway 45 SU 3324 9850 00 K1 76,- for Condor 80 6746 and Condor 45 6745 8331 00 K1 76,- for Condor 60 6759 8395 00 K1 76,- for Condor 90B 6743 and Condor 50 6732 8344 00 K1 76,- for Flavia 60 3304 8K10 00 K1 76,- for Flavia 50 3305 8K11 00 K1 76,- for Flavia 45 3306 8K17 00 K1 76,- for Laola 50 6778 8294 00 K1 76,- for Monumentum 3303 8K25 00 K1 76,- for NewWave 60 6716 8304 50 K1 76,- for Solo Eck 6708 8K09 00 K1 76- for Subway 80 6726 8K07 00 K1 76,- for Subway 60 6712 and 6770 8K04 00 K1 76,- for Subway 60 XL 6719/6718, Subway 60 XL flat 6719/6718, Subway 60 S 3309, Subway 60 S flat 3309 for Subway 50 6713/6773, Subway 50 flat 6713/6773, Subway 60 XR 6721/6720, Subway 60 XR flat 6721/6720 8K31 00 K1 76,- 8K05 00 K1 76,- for Subway 45 6714 and 6772 8K06 00 K1 76,- for Butler 90 6323 8341 00 K1 76,- for Timeline 60 6790, Timeline 60 flat, Metric Art 60 6792, Architectura 60 3360 8K12 00 K1 76,- for Timeline 50 3307, Timeline 50 flat 3307, Architectura 50 3350 9K09 00 K1 76,- for Timeline 45 6791, Timeline 45 flat 6791 8K13 00 K1 76,- Mounting kit for Butler 60 sink without draining board 9220 58 00 12,- SPARE PARTS 95

CARE INSTRUCTIONS Care instructions Easy-care beyond compare You have chosen a quality product from Villeroy & Boch the perfect solution for kitchens with character. Ceramic is a natural material that harmonises with all materials in the kitchen. The numerous advantages of ceramics that arise from the interplay between carefully selected raw materials and state-of-the-art production technology will already be familiar to you from other areas, such as tableware, tiles and bathroom ceramics. Villeroy & Boch has managed to further improve the outstanding properties of this material: CeramicPlus, the ceramic material with the unique easy-care surface that simply stays cleaner. It is so smooth that there are hardly any places where water and dirt can cling, so they drain away immediately. Even most stubborn stains, such as from tea, beetroot or red wine, and lime scale can be easily removed. It s a real help in the kitchen, because it means less work and less cleaning agents are required. And it s not a miracle but the result of our 250 years of experience with ceramics. Various tests simulating long-term use have demonstrated CeramicPlus s lasting resistance to soiling (when the care instructions are duly observed). The high quality and outstanding properties of CeramicPlus have also been confirmed in tests carried out by the independent IST Fraunhofer Institut in Braunschweig. In addition, the material properties are also systematically tested and monitored in the Villeroy & Boch laboratory. With the purchase of this product made from CeramicPlus as with all products from Villeroy & Boch you are getting an item of impeccable quality. We hope that your easy-care ceramics will give you a lot of pleasure. Cleaning and care of your kitchen ceramics With its innovative new surface, CeramicPlus sets new standards in hygiene and ease of care. Now, scrubbing, scouring and scratching are a thing of the past. All it takes is a regular wipe with a soft, damp cloth and a mild cleaning agent. To ensure that the easy-care properties of your kitchen ceramics last as long as possible while allowing you to fully benefit from the many advantages offered by CeramicPlus, please observe the following care instructions. Regular care of your kitchen ceramics For regular care of your kitchen ceramics, we recommend always using a soft, non-abrasive sponge or cloth. It is best particularly where limescale is an issue to use a standard washing-up liquid or a vinegar-based cleaning agent (e.g. Frosch Vinegar cleaner from Erdal Rex). Dealing with heavier soiling Below you will find a few examples of cleaning agents that, when used in accordance with the manufacturers recommendations, will help preserve the quality of your kitchen ceramics over the long term. Because kitchen ceramics are harder than metal, metallic items can occasionally leave marks on ceramic surfaces. Marks of this kind should only be removed using one of the mild cleaning agents listed in the table. Applications (according to manufacturer s recommendations) Regular cleaning and care Anorganic dirt (e.g. limescale) Grease Examples All-purpose cleaners, e.g.: Viss kitchen cleaner (Lever), Der General Professional (Henkel) Vinegar-based cleaners, e.g.: Frosch Vinegar cleaner (Erdal Rex), all commercial washing-up liquids Lime dissolvers, e.g.: Sidol anti-limescale (Henkel), Viakal (Procter & Gamble) Vinegar-based cleaners, e.g.: Frosch Vinegar cleaner (Erdal Rex) Grease remover, e.g.: Sidol kitchen cleaner (Henkel) Vinegar-based cleaners, e.g.: Frosch Vinegar cleaner (Erdal Rex) Your attention is particularly drawn to the fact that aggressive cleaning agents (see below) can scratch ceramic surfaces and can harm or (if used regularly) even destroy the special properties of CeramicPlus. Scouring creams or powders Concentrated drain cleaners Tap and steel cleaners INSTALLATION INSTRUCTIONS For this reason we recommend avoiding the use of these cleaning agents completely. If on occasion it should be necessary to use drain cleaning chemicals or metal cleansers, direct contact with the kitchen ceramics should be avoided. Thanks to the exceptional easy-care properties of CeramicPlus, you will achieve fresh cleanliness and optimum hygiene without the need for aggressive cleaning agents. * The care instructions can also be ordered for customers under article number 9211 J6 A1. 96

INSTRUCTIONS FOR SURFACE-MOUNTED INSTALLATION Sinks Ref. Countertop cutout ARCHITECTURA 50 3350 83,0 x 48,0 cm ARCHITECTURA 60 3360 97,0 x 48,0 cm ARENA Eck 6729 see attached template (Ref. 9307 22 A0) CONDOR 45 6745 76,0 x 47,0 cm CONDOR 50 6732 82,5 x 47,0 cm CONDOR 60 6759 97,0 x 47,0 cm CONDOR 80 6746 113,0 x 47,0 cm FLAVIA 45 3306 77,0 x 48,0 cm FLAVIA 50 3305 87,0 x 48,0 cm FLAVIA 60 3304 98,0 x 48,0 cm LAOLA 50 6778 86,5 x 47,0 cm METRIC ART 60 6792 96,0 x 47,0 cm NEW WAVE 60 6716 see attached template (Ref. 9307 B2 A5) SOLO Eck 6708 see attached template (Ref. 9307 B3 A5) SUBWAY 45 6714/6772 74,0 x 48,0 cm SUBWAY 45 Compact 3313/3312 62,0 x 48,0 cm SUBWAY 50 6713/6773 88,0 x 48,0 cm SUBWAY 50 S 3315 49,5 x 48,0 cm SUBWAY 60 6712/6770 97,0 x 48,0 cm SUBWAY 60 XL 6719/6718 97,0 x 48,0 cm SUBWAY 80 6726 113,0 x 48,0 cm SUBWAY XM 6780 59,0 x 48,0 cm SUBWAY 60 XR 6721/6720 97,0 x 48,0 cm SUBWAY XS 6781 44,5 x 48,0 cm SUBWAY 60 S 3309 57,0 x 48,0 cm TIMELINE 45 6791 77,0 x 48,0 cm TIMELINE 50 3307 87,0 x 48,0 cm TIMELINE 60 6790 97,0 x 48,0 cm Knocking out the tap holes PLEASE NOTE Examine the sink for damage BEFORE INSTALLATION. Only install a sink that is in perfect condition. IMPORTANT! Always wear protective goggles and suitable protective clothing when knocking out the tap hole! BEFORE INSTALLATION knock out the taps holes required as follows: Carefully transfer the centre of the tap hole required from the lower side of the sink onto the glazed upper side and mark. Only ever knock a tap hole through from the GLAZED UPPER SIDE OF THE SINK, NEVER FROM THE LOWER SIDE! Use suitable tools (e.g. hammer and centre punch) to knock the pre-punched tap hole out from above. Position the punch initially in the centre of the tap hole. Then widen to the diameter required.please be very careful not to damage the glaze around the tap hole. INSTALLATION INSTRUCTIONS 97

INSTRUCTIONS FOR SURFACE-MOUNTED INSTALLATION Installation of surface-mounted sinks with the option of dismantling without causing any damage A Carefully pierce the required tap holes from the glazed side (!) using a hammer and, if necessary, a punch. B Cut hole in worktop as required or using the template supplied. Clean the cut-out edge and remove any shavings. C Insert and align sink. D Remove sink. Fix EPDM foam tape all around the outer contour of the sink, 5 mm from the cutting edge. Only fix the foam tape to the work surface, not to the sanded rim of the sink!! Draw around the outer contour of the sink on the worktop. F Seal cleaned cut-out edge with silicon, fill Apply a layer of silicon (approx. 10 mm thick) to the worktop area that is to support the sink and (!) to the EPDM foam tape* E Remove the outline of the sink drawn onto the worktop, clean the edge of the sink. *Please note the product information and the instructions for use on the packaging. INSTALLATION INSTRUCTIONS G Insert and align sink. H Remove any excess silicon.. Connect supply and drain lines. In order for Villeroy & Boch to be liable, the product must be installed in accordance with the installation instructions for allowing the option of dismantling without causing any damage (assembly set 9218 02 00). 98

INSTALLATION INSTRUCTIONS Installation Instructions Monumentum 3303 Installation Instructions Ceramic Sinks 6320 / 6323 Please note: In order to ensure that any concealed damage caused in transit is identified in good time, the ceramic elements should be examined prior to installation. When installing ON METAL CONSOLES, the contact surface on the wall must be level and able to withstand pressure. The load-bearing capacity of the bathroom fitting is dependent on the stability of the wall to which it is attached. Plasterboard and similar boarding are thus only permissible when used in conjunction with suitable bearing elements. When installing ON A CABINET, a suitable cabinet construction is required. The installation instructions have been carefully drawn up in accordance with the latest knowledge available. Please read them carefully prior to commencing installation work. Misunderstandings or errors resulting from changes to models of which the installer may not be aware may lead to incorrect installation. Particularly when larger building projects or series installation work are involved, we therefore recommend you obtain confirmation from our company that the stated installation dimensions are still valid, or carry out a comparison with an article from our current production output. The advice on installation provided in our literature, written instructions for installation and verbal advice provided by our staff do not establish a legal relationship. We reserve the right to carry out modifications to products in the interests of technical improvement. INSTALLATION INSTRUCTIONS 99

INSTALLATION INSTRUCTIONS BUTLER AND FARMHOUSE SINKS Installation Instructions Butler and Farmhouse sinks Ceramic sink 6320 (installing on metal consoles) Installation Instructions Butler and Farmhouse sinks Ceramic sink 6320 (installing on a cabinet) INSTALLATION INSTRUCTIONS 100

INSTALLATION INSTRUCTIONS BUTLER AND FARMHOUSE SINKS Installation Instructions Butler and Farmhouse sinks Ceramic sink 6323 (installing on metal consoles) Installation Instructions Butler and Farmhouse sinks Ceramic sink 6323 (installing on a cabinet) INSTALLATION INSTRUCTIONS 101

INSTALLATION INSTRUCTIONS CISTERNA&SUBWAY Cisterna and Subway Undercounter sinks (6702, 6703, 6704, 6706, 6707, 6758, 3310, 3324, 3325) Instructions for installation in natural stone slabs (e.g. granite) with a minimum thickness of 25 mm. We recommend the use of cementing materials specifically intended for natural stone. Please follow the manufacturer s instructions. Installation accessories applied: 6 fastening brackets, 6 M5 x 35 screws, 6 M5 x 30 screws, 6 MS dowels 1. Determine where the sink is to be positioned on the slab and cut out the hole according to the template. Lay the slab face down on an absolutely plane and true, stable surface. Make sure that all surfaces top be cemented are free of grease and otherwise clean and dry. Apply silicone rubber to the ground rim of the sink. Lay the sink over the hole in the slab and align. Remove any excess sealant. 2. Mark drilling holes on the slab at approx. 10 mm from the outer edge of the sink. Ensure that the sink and brackets fit into the cabinet used. Using a 6 mm carbide drill, drill the holes (without using the percussion feature). Using a 6 mm carbide drill, drill the holes (without using the percussion feature) to 18 mm, not counting the tip, preferably using a depth gauge attachment). 3. Insert the MS special dowels enclosed flush into the holes. Attach the fastening brackets with the screws supplied to the sink and slab. Tighten the screws by hand with a screwdriver. (Do not use a torque lever). The cut-out dimensions include allowances for ceramic tolerances and a safety margin. In certain cases the countertop may therefore jut over the rim of the washbasin by up to 11 mm (7 mm on 6705). This overhang can be minimised by producing the cut-out according to the contours of the washbasin concerned, thereby observing the ceramic tolerances. When producing the cut-out by means of the template: Recommended distance between edge of cut-out and centre of tap fitting hole: approx. 75 mm We reserve the right to make technical alterations. INSTALLATION INSTRUCTIONS 102

INSTALLATION INSTRUCTIONS FOR FLUSH-FIT SINKS Recommendations for installation of flush-fit sinks in natural stone worktops, minimum thickness 4 cm. The installation kit can also be ordered for customers under article number 9220 58 00. 1 Natural stone worktop 2 Sink 3 Natural stone-silicone jointing compound (Note recommendations by supplier/manufacturer of natural stone) 4 Levelling compound (enclosed) 5 Use enclosed wood spacers and/or levelling compound under sink for levelling purposes Reference point cutout dimension a, b Reference point cutout dimension a1, b1 Coutout dimension: Sinks Ref. a (mm) b (mm) a1 (mm) b1 (mm) C (mm) Subway 60 Flat 6712 0F X 481 971 455 945 40 Subway 60 Flat 6770 0F X 481 971 455 945 40 Subway 60 XL Flat 6719 0F X 481 971 455 945 40 Subway 60 XL Flat 6718 0F X 481 971 455 945 40 Subway 60 XR Flat 6721 0F X 481 971 455 945 40 Subway 60 XR Flat 6720 0F X 481 971 455 945 40 Subway 50 Flat 6713 0F X 481 886 455 860 40 Subway 50 Flat 6773 0F X 481 886 455 860 40 Subway 45 Flat 6714 0F X 481 751 455 725 40 Subway 45 Flat 6772 0F X 481 751 455 725 40 Subway 60 S Flat 3309 0F X 481 571 455 545 30 Subway 60 XM Flat 6780 0F X 481 591 455 565 30 Subway 45 XS Flat 6781 0F X 481 446 455 420 30 Subway 50 S Flat 3315 0F X 481 496 455 470 30 Timeline 60 Flat 6790 0F reversible 481 971 455 945 40 Timeline 50 Flat 3307 0F reversible 481 871 455 845 40 Timeline 45 Flat 6791 0F reversible 481 771 455 745 40 INSTALLATION INSTRUCTIONS 103