Practical Intrinsic Safety for Engineers and Technicians

Practical Intrinsic Safety for Engineers and Technicians

THIS BOOK WAS DEVELOPED BY IDC TECHNOLOGIES WHO ARE WE? IDC Technologies is internationally acknowledged as the premier provider of practical, technical training for engineers and technicians. We specialize in the fields of electrical systems, industrial data communications, telecommunications, automation and control, mechanical engineering, chemical and civil engineering, and are continually adding to our portfolio of over 60 different workshops. Our instructors are highly respected in their fields of expertise and in the last ten years have trained over 200,000 engineers, scientists and technicians. With offices conveniently located worldwide, IDC Technologies has an enthusiastic team of professional engineers, technicians and support staff who are committed to providing the highest level of training and consultancy. TECHNICAL WORKSHOPS TRAINING THAT WORKS We deliver engineering and technology training that will maximize your business goals. In today s competitive environment, you require training that will help you and your organization to achieve its goals and produce a large return on investment. With our training that works objective you and your organization will: Get job-related skills that you need to achieve your business goals Improve the operation and design of your equipment and plant Improve your troubleshooting abilities Sharpen your competitive edge Boost morale and retain valuable staff Save time and money EXPERT INSTRUCTORS We search the world for good quality instructors who have three outstanding attributes: 1. Expert knowledge and experience of the course topic 2. Superb training abilities to ensure the know-how is transferred effectively and quickly to you in a practical, hands-on way 3. Listening skills they listen carefully to the needs of the participants and want to ensure that you benefit from the experience. Each and every instructor is evaluated by the delegates and we assess the presentation after every class to ensure that the instructor stays on track in presenting outstanding courses. HANDS-ON APPROACH TO TRAINING All IDC Technologies workshops include practical, hands-on sessions where the delegates are given the opportunity to apply in practice the theory they have learnt. REFERENCE MATERIALS A fully illustrated workshop book with hundreds of pages of tables, charts, figures and handy hints, plus considerable reference material is provided FREE of charge to each delegate. ACCREDITATION AND CONTINUING EDUCATION Satisfactory completion of all IDC workshops satisfies the requirements of the International Association for Continuing Education and Training for the award of 1.4 Continuing Education Units. IDC workshops also satisfy criteria for Continuing Professional Development according to the requirements of the Institution of Electrical Engineers and Institution of Measurement and Control in the UK, Institution of Engineers in Australia, Institution of Engineers New Zealand, and others.

CERTIFICATE OF ATTENDANCE Each delegate receives a Certificate of Attendance documenting their experience. 100% MONEY BACK GUARANTEE IDC Technologies engineers have put considerable time and experience into ensuring that you gain maximum value from each workshop. If by lunchtime on the first day you decide that the workshop is not appropriate for your requirements, please let us know so that we can arrange a 100% refund of your fee. ONSITE WORKSHOPS All IDC Technologies Training Workshops are available on an on-site basis, presented at the venue of your choice, saving delegates travel time and expenses, thus providing your company with even greater savings. OFFICE LOCATIONS AUSTRALIA CANADA INDIA IRELAND MALAYSIA NEW ZEALAND POLAND SINGAPORE SOUTH AFRICA UNITED KINGDOM UNITED STATES idc@idc-online.com www.idc-online.com Visit our website for FREE Pocket Guides IDC Technologies produce a set of 6 Pocket Guides used by thousands of engineers and technicians worldwide. Vol. 1 ELECTRONICS Vol. 4 INSTRUMENTATION Vol. 2 ELECTRICAL Vol. 5 FORMULAE & CONVERSIONS Vol. 3 COMMUNICATIONS Vol. 6 INDUSTRIAL AUTOMATION To download a FREE copy of these internationally best selling pocket guides go to: www.idc-online.com/downloads/ On-Site Training SAVE MORE THAN 50% OFF the per person cost CUSTOMISE the training to YOUR WORKPLACE! Have the training delivered WHEN AND WHERE you need it! All IDC Technologies Training Workshops are available on an on-site basis, presented at the venue of your choice, saving delegates travel time and expenses, thus providing your company with even greater savings. For more information or a FREE detailed proposal contact Kevin Baker by e-mailing: training@idc-online.com

IDC TECHNOLOGIES Worldwide Offices AUSTRALIA Telephone: 1300 138 522 Facsimile: 1300 138 533 West Coast Office 1031 Wellington Street, West Perth, WA 6005 PO Box 1093, West Perth, WA 6872 East Coast Office PO Box 1750, North Sydney, NSW 2059 CANADA Toll Free Telephone: 1800 324 4244 Toll Free Facsimile: 1800 434 4045 Suite 402, 814 Richards Street, Vancouver, NC V6B 3A7 INDIA Telephone : +91 444 208 9353 35 4th Street, Kumaran Colony, Vadapalani, Chennai 600026 IRELAND Telephone : +353 1 473 3190 Facsimile: +353 1 473 3191 Caoran, Baile na habhann, Co. Galway MALAYSIA Telephone: +60 3 5192 3800 Facsimile: +60 3 5192 3801 26 Jalan Kota Raja E27/E, Hicom Town Center Seksyen 27, 40400 Shah Alam, Selangor NEW ZEALAND Telephone: +64 9 263 4759 Facsimile: +64 9 262 2304 Parkview Towers, 28 Davies Avenue, Manukau City PO Box 76-142, Manukau City POLAND Telephone: +48 12 6304 746 Facsimile: +48 12 6304 750 ul. Krakowska 50, 30-083 Balice, Krakow SINGAPORE Telephone: +65 6224 6298 Facsimile: + 65 6224 7922 100 Eu Tong Sen Street, #04-11 Pearl s Centre, Singapore 059812 SOUTH AFRICA Telephone: +27 87 751 4294 or +27 79 629 5706 Facsimile: +27 11 312 2150 68 Pretorius Street, President Park, Midrand PO Box 389, Halfway House 1685 UNITED KINGDOM Telephone: +44 20 8335 4014 Facsimile: +44 20 8335 4120 Suite 18, Fitzroy House, Lynwood Drive, Worcester Park, Surrey KT4 7AT UNITED STATES Toll Free Telephone: 1800 324 4244 Toll Free Facsimile: 1800 434 4045 5715 Will Clayton #6175, Humble, TX 77338, USA Website: www.idc-online.com Email: idc@idc-online.com

Presents Practical Intrinsic Safety for Engineers and Technicians By Geoff Bottrill Revision 4 Website: www.idc-online.com E-mail: idc@idc-online.com

IDC Technologies Pty Ltd PO Box 1093, West Perth, Western Australia 6872 Offices in Australia, New Zealand, Singapore, United Kingdom, Ireland, Malaysia, Poland, United States of America, Canada, South Africa and India Copyright IDC Technologies 2007. All rights reserved. ISBN 978-1-921007-67-5 First published 2007 All rights to this publication, associated software and workshop are reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, mechanical, photocopying, recording or otherwise without the prior written permission of the publisher. All enquiries should be made to the publisher at the address above. Disclaimer Whilst all reasonable care has been taken to ensure that the descriptions, opinions, programs, listings, software and diagrams are accurate and workable, IDC Technologies do not accept any legal responsibility or liability to any person, organization or other entity for any direct loss, consequential loss or damage, however caused, that may be suffered as a result of the use of this publication or the associated workshop and software. In case of any uncertainty, we recommend that you contact IDC Technologies for clarification or assistance. Trademarks All logos and trademarks belong to, and are copyrighted to, their companies respectively. Acknowledgements IDC Technologies expresses its sincere thanks to all those engineers and technicians on our training workshops who freely made available their expertise in preparing this manual.

Contents 1 Introduction 1 1.1 General introduction to explosion protection 1 1.2 Historical background to explosion protection 1 1.3 Scope of protection systems 2 1.4 Responsibility 3 1.5 Explosion of protection and certification 3 1.6 Legality 4 1.7 The role of standards and certification 4 2 Definitions and Terminology 5 2.1 Definitions and terminology 5 2.2 Protection concepts 5 2.3 Principles of ignition 6 2.4 Electricity as a source of ignition 7 2.5 Properties of flammable materials 7 2.6 Other relevant properties of flammable materials 10 2.7 Other properties affecting general safety 10 2.8 Summary 11 2.9 Classification system 11 2.10 Classification concepts 12 2.11 Area classification locations 18 2.12 Summary of area classification 21 2.13 Methods of explosion protection 22 2.14 Classification of equipment for use in hazardous areas 22 2.15 Certification 23 2.16 Dusts 23 3 Principles of Intrinsic Safety 27 3.1 Origins of intrinsic safety 27 3.2 Principles of IS 28 3.3 Electrical theory to explain IS 29 3.4 Implementation of IS 36 3.5 The shunt diode safety barrier 40 3.6 Associated apparatus 51 3.7 Electrical apparatus in the hazardous area 53 3.8 Simple apparatus or certified apparatus 54 3.9 Enclosures 60 3.10 Temperature 60 4 Systems Concepts 63 4.1 The IS systems concept 63 4.2 An IS system 63 4.3 System documentation 64 4.4 Assessment of safety 65 4.5 Simple apparatus 66

4.6 Safety parameters 66 4.7 Temperature classification of systems 67 4.8 Systems concepts in other standards 68 4.9 Conclusion to systems 68 5 Types of Explosion Protection 69 5.1 Methods of explosion protection 69 5.2 Separation 71 5.3 Construction 75 5.4 Containment 78 5.5 Electrical design 80 5.6 Special 80 5.7 Multiple certification 81 5.8 Selection of certification method 82 5.9 Perceived advantages of IS 82 6 Earthing Systems 85 6.1 Earthing 85 6.2 Personal safety 85 6.3 Hazardous area considerations 87 6.4 Earthing and bonding 88 6.5 Static electricity 90 6.6 Clean and dirty earthing 93 6.7 Electrical Interference 94 6.8 Earthing terminology 96 6.9 Connection of earthing systems 98 6.10 Power supply systems 101 6.11 Portable equipment using batteries 103 6.12 Earthing arrangement standard solutions 103 6.13 Earth loops 106 6.14 Computer earthing 106 6.15 Surge protection systems 110 6.16 Standards and codes of practice 112 7 Installations 113 7.1 Introduction to installation requirements 113 7.2 Installation requirements 114 7.3 IEC79-14: Standard contents 114 7.4 Other relevant installation standards and codes 115 7.5 Safety documentation 115 7.6 General requirements of the standard 116 7.7 Practical aspects of IS installations 121 7.8 Other considerations affecting installation 134 7.9 Other installation issues 134 8 Inspection and Maintenance 137 8.1 Inspection and maintenance 137 8.2 Integrity preserved 138 8.3 Scope of IEC79-17 138 8.4 General requirements 139

8.5 Inspections 139 8.6 The insulation test 141 8.7 Maintenance 142 8.8 Testing 146 8.9 Unauthorised modification 147 8.10 Earthing integrity verification 147 8.11 BS5345 inspection requirements 147 9 Standards and Certification 151 9.1 Standards and certification 151 9.2 Definition of a standard 151 9.3 Standards for IS 152 9.4 The European ATEX directive 155 9.5 The international standards organisation 158 9.6 Certification 158 9.7 Safety documentation 164 9.8 Marking of apparatus 165 9.9 Example discussed 167 10 Fault Finding 169 10.1 Fault finding 169 10.2 Fault-finding routine 169 10.3 Safety assessment of testing 171 10.4 Test equipment 171 10.5 Use of uncertified test apparatus 174 10.6 Interface testing 178 10.7 Certified apparatus 181 10.8 IS apparatus repair procedure 181 11 Applications 185 Applications 185 11.1 Loop device selection 185 11.2 Terminology 186 Status inputs 187 11.3 Switch conventions 187 11.4 Circuit faults 188 11.5 Relay objects 189 11.6 IS switch status 189 11.7 Switch transfer using galvanic isolators 193 11.8 Switch input criticality 196 11.9 Proximity switches 197 11.10 Intrinsic safety aspects of switches 197 11.11 Summary 198 Analogue applications 198 11.12 High-level signals 198 11.13 The 4/20mA transmitter 198 11.14 Operational characteristics 199 11.15 Transmitter operational characteristics 200 11.16 Smart transmitters 201 11.17 Safety parameters 201

11.18 Marking 201 11.19 Safety assessment 202 Transmitter loops with interfaces 202 11.20 Single channel barriers 202 11.21 Two channel barrier solutions 205 11.22 Referencing common connections with barrier systems 208 11.23 Safety considerations 208 Active barriers 209 11.24 Active vs passive barriers 209 Analogue galvanic isolation 210 11.25 Principles of operation 210 11.26 Functional aspects 211 11.27 Non-energy storing input 211 Loop applications 212 11.28 Safety aspects 213 Applications concepts 213 11.29 Power supply connection to interfaces 214 11.30 Earth return of faults 220 Temperature measurement 220 11.31 Thermocouples 220 11.32 Resistance thermometry 226 11.33 Two-wire high resistance elements 233 11.34 RTDs with galvanic isolating interfaces 233 11.35 Temperature convertors 233 11.36 Temperature multiplexing 234 11.37 Strain gauge bridges 236 11.38 Isolators in combination 240 Channel function concept 241 11.39 Power supply 242 11.40 Isolator supply techniques 243 11.41 Higher power techniques 244 11.42 Higher power IS channel interfaces 244 The solenoid valve 244 11.43 Safety characteristics 245 11.44 Solenoid valve operation 246 11.45 Operation of barriers with SVs 246 11.46 Application techniques 246 11.47 Operation of isolating drivers with SVs 247 Analogue outputs 247 11.48 I/P convertors 247 11.49 Operational detail 248 11.50 Controller analogue output modules 248 Vibration monitoring 249 11.51 Pulse signal transmission 249 11.52 Conductivity and ph 250 Techniques for operating through hazardous areas 250 11.53 Safety considerations of transfer across hazardous areas 250 11.54 Data communications 252 11.55 Communication techniques 253 11.56 Combined voltage and current 254 11.57 Multi-dropping 255 I/O systems 256 11.58 Redundancy 257

HART systems 260 11.59 HART monitoring systems 261 Fieldbus concepts with IS 261 Selection of apparatus and interfaces 263 11.60 Determination of important criteria 263 11.61 Barrier vs isolator philosophy 264 11.62 Option selection 265 Appendix A IEC Series Standard Titles 267 Appendix B List of IS Standards and Codes of Practice by Country 269 Appendix C IEC79 Ex i Inspection Schedule 271 Appendix D CENELEC Members 273 Appendix E IP Code 275 Appendix F Standards Reference 277 Appendix G Other Reference Documents 279 Appendix H European and International Standards 281 Appendix I Practical Exercises 287

1 Introduction 1.1 General introduction to explosion protection Intrinsic Safety (IS) is one of a number of explosion protection techniques. Explosion protection (or explosion proofing ) may be described as the specific treatment of industrial electrical equipment, such that, in the presence of a potentially explosive gas atmosphere and under prescribed conditions, it cannot cause ignition. Equipment so treated is generally referred to as (electrical) Apparatus. There are considered to be nine different categories or techniques that can be employed by the suppliers of electrical apparatus to meet the industrial needs of users. The purpose of electrical apparatus designed to minimise the risk of ignition is to allow industry to handle situations where electrical power and signals can be used in hazardous atmospheres. The risk posed is never considered to be totally eliminated as this would be impossible to guarantee. The risk must be lowered to levels that are deemed acceptable by the Law, and all parties interested in safety. It is the consequences of an industrial explosion that are potentially catastrophic and therefore cannot be ignored. 1.2 Historical background to explosion protection Explosion Protection concepts were developed in parallel and as a consequence of the mining industry. Coal has been mined for more than 1000 years. Large-scale mining was practised as early as the 18th century in many countries. Mine safety procedures operated from this time when the risks of fire-damp were beginning to be understood. The initial way of dealing with the problem was to send fire-men, younger people covered with wet sacking, down mine roads, clutching a long lighted taper. The purpose of this was to burn off any residue of methane that had built up before the miners began work. This was an effective but somewhat sacrificial and barbaric practice! The renowned Davy Safety Lamp was first tested underground at Hebburn Colliery on 9 th January 1816. Its invention was as a result of the disaster on 25 th May 1815 at Felling Colliery, County Durham, in the UK, where 92 men and boys lost their lives. The scientist, Humphrey Davy, was approached on behalf of the Sunderland Society to try to provide a solution to the problem of firedamp in mines. The Sunderland Society was formed by concerned individuals which included

2 Practical Intrinsic Safety for Engineers and Technicians MPs and churchmen who realised that the danger was ever present and that solutions were required. Over the years, the Davy Safety Lamp must have saved countless lives. Electrical equipment came into use in mines well before the 1900s. It was not until 1905 that regulations in Britain were introduced to govern the use of electricity. The regulations suggested that equipment installed underground should be designed to minimise the risk of heat or sparks causing ignition. Even before this, equipment had been purposely over-engineered in order to withstand the adverse conditions underground. Enclosures and housings were made more substantial than would be otherwise required. The design criteria was that mechanical shock to the equipment, high levels of dust and moisture should not be able to penetrate the casing and render the equipment inoperable or unsafe. This heavy construction meant that it was also more likely to protect personnel from electrocution. An additional advantage was that the enclosures were found to withstand the effect of an internal explosion if a gas air mixture had seeped inside. It was Humphrey Davy who explained that the enclosure would prevent the internal ignition from reaching the external gas air mixture surrounding it, provided that certain constructional limits were observed. The origins of this method, as one of explosion protection, undoubtedly came from this realisation. The term Flameproof was not used until a British Standard was published in 1924. More explosions that were thought to be caused by the use of electricity in mines led to the development of British Standards in the early 1900s. On October 13 th 1913 at the Universal Colliery in Senghenydd, Glamorgan in the UK, 439 miners were killed. This was the largest explosion in a UK mine. The government of the day was pressured into appointing two scientists, Wheeler and Thornton, to investigate the cause of the explosion. Their findings, published in 1916, indicated that it was most likely to have been caused by sparks from the electric bare wire bell signalling system. This was a simple arrangement to aid communication between parties of miners at the coal face (filling coal trucks at one end of a roadway) and the winch operators (at the shaft end) preparing to receive the full trucks. The signalling system was operated from a low voltage and was exempt from the 1905 regulations. As a result of the two scientists work, the spark energy to ignite methane and firedamp was determined. This led to the formal development of explosion protection methods and standards. Crude forms of energy limiting were then used in low voltage circuits to prevent incendive sparks. This method of energy limiting was used for some time and comparatively recently received the name of Intrinsic Safety. Initial attempts to operate with IS systems at higher power levels than are accepted now were included into British Standard BS4444. 1.3 Scope of protection systems It is important to realise that modern explosion protection methods and standards are only in place to minimise the risk of electricity causing ignition of a flammable atmosphere. Use of these standards does not enable the equipment to continue to work when fire or explosions have been caused. This is a general misconception of the term. Systems which are designed to continue to operate even though some disaster has been caused are the subject of separate engineering consideration. Fail-Safety concepts are discussed in this manual because they form an important part of the safety strategy for instrumentation and control applications. There are many other safety issues that must be taken into account and must operate in parallel with Explosion Protection and IS. These techniques can and do operate in a complementary way and one technique does not necessarily alter the strategy of the other.

Introduction 3 1.4 Responsibility The requirement placed upon industry to operate in a safe way is contained in the laws of most countries. A duty is placed on the owners of places of work, to provide conditions that minimise risks to such an extent as is reasonably practicable. This legal precedent is followed to encapsulate the level of responsibility needed by industrial management for the definition of this duty. It is clearly necessary to safeguard life and limb. It is also in the interest of the general public that property, investment, livelihood and social structures are similarly protected. Owners of industrial premises must be aware of all aspects of general safety and must take precautions to minimise risks to acceptable levels. The term, acceptable levels is not easy to define and is based on a matter of judgement. This may vary in definition from one country to another and so it is up to the laws of those countries to balance the probability according to their interpretation. An obvious question to ask is whether it is absolutely necessary to site a piece of electrical equipment in a position where it has an increased risk of causing ignition. If it is possible to design out this requirement then the risks are inevitably reduced. This is the responsibility of the plant design body. General electrical safety is just one of many aspects of safety that need to be considered by the plant owner in an industrial situation. The consequences of equipment and system failures causing accidents that include explosions must be considered by the factory owner. The location of a plant and the impact of an explosion on the surrounding location must be assessed. It is reasonable to take extra precautions if the factory is located in the middle of a city, but does not mean that safety can be relaxed if it is located in the middle of nowhere. Risk assessment is the art of judging the likely causes of disasters and balancing them against measures taken to prevent the occurrence of such a disaster. It must take the view that nothing is completely safe. It should be realised that explosion protection is just one tool which can be used in an industrial situation to minimise the risk of electricity causing ignition to an acceptable level. 1.5 Explosion of protection and certification The expense and inconvenience of safety testing each item of electrical equipment in each individual plant situation is impractical. A system has evolved to facilitate the selection of equipment for use in plants which utilise potentially flammable materials. The principle of the system is based on the matching of two sets of criteria that are defined under a common set of rules. These criteria are: The classification of a plant The classification of electrical equipment used in the plant. The common set of rules comes from national and international Standards and Codes of Practice. These have been developed over the years and describe acceptable ways of building equipment in such a way as to prevent electricity from causing ignition in certain hazards. The standards expect that the hazards into which the equipment is to be placed have been categorised and defined by these same common rules and so the hazard and equipment may be directly compared for suitability. The certification process merely states conformance with the standard to which equipment has been assessed. It does not imply that the equipment is safe.

4 Practical Intrinsic Safety for Engineers and Technicians The classification rules will be discussed in some detail in this manual. These have led to an almost internationally accepted set of markings that are used to identify Explosion Protection (Ex) equipment. The benefit of this system is that it helps both equipment manufacturers and users to design, select, install and maintain equipment in a more practical and cost effective fashion. Documentation of all criteria applied to safety is required by Law and by the Standards. The classification system makes documentation easier. In this way it may be said to contribute to the overall plant safety. A set of documents collected and collated by the management of any plant is fundamental in communicating the appropriate information on safety issues. It is referred to as Plant Safety Documentation. Its content will be discussed during the course. 1.6 Legality The present legal situation in the UK may be taken as an example of the way the Law relates to the responsibilities of factory owners. The law does not state how the owner must make his factory safe. It merely states that the owner must be able to demonstrate that he has taken all reasonably practicable steps to assure safety. The use of national or internationally agreed standards to which equipment has been tested/certified and which forms part of an overall scheme of safety, as recorded in the Plant Safety Documentation, is accepted as proof that adequate care has been taken. In the UK, as yet, it is not illegal, if certified equipment has not been used. In this case, the owner would be responsible for proving that the equipment on his plant was safe if an explosion were to have occurred. This burden of proof could only be satisfied if the owner maintained records demonstrating that the equipment used on the plant was selected from that which had a proven track record of safety. Note: The situation described above will remain true in Europe until the European ATEX Directive, known as Article 100a, came into force on 1 st July 2003. Thereafter, all equipment, of whatever origin, sold into and installed throughout Europe, must have been assessed for safe use and marked accordingly. This covers both electrical and mechanical equipment. It is discussed further in the section on Standards and Certification. In other countries, Standards may be cited by in the Law of the country as to how to proceed on these matters. 1.7 The role of standards and certification The local and national standards for the design and implementation of explosion protection systems are now converging into the International Electrotechnical Committee Standard series IEC79. Since the first publication of the IEC documents in the mid-1980s, there has been an escalation of effort to complete the series and maintain its technical content. Many countries have now adopted IEC79. It is therefore logical that where contracts to design and supply industrial processes requiring safety in operation are now global, safety standards are accepted across the world. This workshop therefore uses the international standards as the basis for training. Where localised experience can augment, explain or clarify the IEC Standards it is used to give examples of common practice methods.