Invisible Series Product Guide
Sonance Invisible Series The Sonance Invisible Series is the ultimate expression in architectural audio. Installed into the wall or ceiling and then finished over with the surrounding surface, Invisible Series speakers deliver ambient music that emanates throughout the space with no visual footprint. Available in five models to accommodate a wide range of room sizes and budgets. The world's best sounding invisible speakers. Matched with the Sonance DSP Amp, Sonance Invisible Series speakers reproduce the full range of frequencies, including crystal clear treble, natural midrange and deep smooth bass response. The result is best-in-class sonic performance that sets a new benchmark for the category. Sound not sight - Sonance Invisible Series delivers unbelievable sound quality that emanates from the wall or ceiling, without any visible signs of a speaker. The space is filled with breathtaking music that seemingly comes from nowhere. They re designed to reproduce a best-in-class 170 of dispersion, which means the sound is spread out from the speaker at a wider angle, delivering even volume levels and better sound quality throughout the entire space. 170 Download the Sonance Brand Guide HERE
Sonance Invisible Series Design not distraction - Sonance Invisible Series speakers are finished over with the same material as the adjoining wall or ceiling surface, including lightweight plaster and paint, wallpaper, wood veneer, or even venetian plaster. They don t just blend into the wall or ceiling, they become part of it. State-of- the-art design and construction - Sonance Invisible Series speakers feature a high quality extruded aluminium chassis and injection moulded polypropylene diaphragm for many years of reliable service and peace of mind. For every space, anywhere in the world - Sonance Invisible Series features the widest range of speakers to deliver zero visual impact in any size space. They can be found in luxury residences, art galleries, museums, restaurants and premier retail boutiques. They are also used exclusively world-wide by Louis Vuitton, Prada, Gucci, Miu Miu, Fendi and Dior! The Sonance Invisible Series range Five models will accommodate a wide range of room sizes and budgets. IS2 Small 2way speaker suitable for smaller rooms 80w RMS (sold in pairs). IS4 IS4 SST ISW IS4C 3 way full range speaker, suitable for a wide range of rooms 100w RMS (sold in pairs and individually). Single Stereo version of the IS4 100w RMS (sold individually). Invisible Woofer for extra bass support 100w RMS (sold individually). Commercial version of the IS4 speaker with 70v,100v taps and 8 ohm bypass (rear enclosure included) 100w RMS (sold individually).
Sonance Invisible Series Versatile Installation Most versatile installation Sonance Invisible Series can be installed to a depth of up to 3mm of lightweight plaster (such as EasiFill), wallpaper or veneer without affecting the sound quality, making them the most versatile invisible speakers available. Shallow design At only 51mm (94mm with the optional enclosure), the extremely shallow design of Sonance Invisible Series speakers makes them compatible with a wide variety of construction types around the world. Optional enclosure The optional enclosure significantly reduces sound transfer through adjoining walls or ceilings without compromising the sonic performance of the speaker. Watch the Sonance Invisible Series Installation Guide here:
Product Specifications IS2 The IS2 is designed for tight installations or very small spaces yet delivers sound that is only bested by the IS4. Front View Back View Side View 410 mm e n c l o s u re 97 mm 4 mm 307 mm 51 mm Tweeter Woofer Frequency Response Impedance: Power Handling 26 sq cm planar diaphragm, driven by a 25.4 mm voice coil 322.6 sq cm planar diaphragm, driven by a 25.4 mm voice coil 50Hz 20kHz ±3dB 8 ohms nominal 80 watts RMS Sensitivity Dispersion Finish 88dB (1W/1 metre) Enclosure 170º hemispherical up to 10kHz Shipping Weight Paper surface ready for up to 3.2 mm flexible material and paint Environment Temperature 357 x 256 x 51 5.5 kg (pair) -17.7 to +51.7 C Overload Protection Two independent self-resetting gel switches (low and high) Cutout Dims 410 x 307 x 51 (without enclosure) 410 x 307 x 97 (with enclosure)! Optional metal enclosure for sound containment (SON-92969)! Optional Place Saver for pre-construction (SON-IS2PS)! Specifications subject to change.! Pliable, elastic material such as joint compound, plaster or wallpaper. Specifications subject to change.
Product Specifications IS4 The new benchmark for invisible speakers. The IS4 features state of the art planar diaphragm technology. The rigid metal frame and optional enclosure make this speaker the best sounding fully concealed speaker in the world. Front View Back View Side View 613 mm e n c l o s u re 97 mm 4 mm 410 mm 51 mm Tweeter Midrange Woofer Frequency Response Impedance: 26 sq cm planar 110 sq cm planar 729 sq cm planar a 51 mm voice coil 40Hz 20kHz ±3dB 8 ohms nominal Sensitivity Dispersion Finish 90dB (1W/1 metre) Enclosure 170º hemispherical up to 10kHz Power Handling Paper surface ready for up to 3.2 mm flexible material and paint Shipping Weight 357 x 560 x 54 100 watts RMS 11.25 kg (pair) Overload Protection Three independent self-resetting gel switches (low and high) Environment Temperature -17.7 to +51.7 C Cutout Dims 410 x 613 x 51 (without enclosure) 410 x 613 x 97 (with enclosure)! Optional metal enclosure for sound containment (SON-92970)! Optional Place Saver for pre-construction (SON-IS4PS)! Specifications subject to change.! Pliable, elastic material such as joint compound, plaster or wallpaper. Specifications subject to change.
Product Specifications IS4 SST The IS4 SST features single stereo technology, the ability to drive one speaker with two inputs. The IS4 SST is impedance matched to ensure proper amplifier protection. The perfect choice for small areas, such as hallways and corridors where two speakers would be impractical or impossible to install. Front View Back View Side View 613 mm e n c l o s u re 97 mm 4 mm 410 mm 51 mm Tweeter Midrange Woofer Frequency Response Impedance: 26 sq cm planar 110 sq cm planar 729 sq cm planar a 51 mm voice coil 40Hz 20kHz ±3dB 8 ohms nominal Sensitivity Dispersion Finish 90dB (1W/1 metre) Enclosure 170º hemispherical up to 10kHz Power Handling Paper surface ready for up to 3.2 mm flexible material and paint Shipping Weight 357 x 560 x 54 100 watts RMS 5.85 kg (pair) Overload Protection Three independent self-resetting gel switches (low and high) Environment Temperature -17.7 to +51.7 C Cutout Dims 410 x 613 x 51 (without enclosure) 410 x 613 x 97 (with enclosure)! Optional metal enclosure for sound containment (SON-92970)! Optional Place Saver for pre-construction (SON-IS4PS)! Specifications subject to change.! Pliable, elastic material such as joint compound, plaster or wallpaper. Specifications subject to change.
Product Specifications ISW The ISW is a low frequency reinforcement to the IS line. Two voice coils drive the diaphragm for unsurpassed invisible low end response. Front View Back View Side View 613 mm e n c l o s u re 97 mm 4 mm 410 mm 51 mm Woofer Frequency Response Impedance: Power Handling Sensitivity 1097 sq cm planar two 51 mm voice coils 35Hz 150Hz ±3dB 8 ohms nominal 100 watts RMS 90dB (1W/1 metre) Dispersion Finish Overload Protection Cutout Dims Enclosure 170º hemispherical up to 10kHz Paper surface ready for up to 3.2 mm flexible material and paint Self-resetting gel switch 410 x 613 x 51 (without enclosure) 410 x 613 x 97 (with enclosure) 357 x 560 x 54 Shipping Weight Environment Temperature 5.85 kg (pair) -17.7 to +51.7 C! Optional metal enclosure for sound containment (SON-92970)! Optional Place Saver for pre-construction (SON-IS4PS)! Specifications subject to change! Requires Sonamp DSP 2-150 or 8-130 (Sold separately)! Pliable, elastic material such as joint compound, plaster or wallpaper. Specifications subject to change.
Product Specifications IS4 C The IS4 C is for any commercial or residential settings where a 70 or 100 volt system is being used. It is transformer-coupled, with 32W, 16W, 8W, 4W, 2W, 1W,.5W taps and 8-ohm bypass that are selectable from the speaker s enclosure. The IS4 C incorporates a polypropylene diaphragm that provides distinct woofer, midrange and tweeter radiation areas to ensure superior-quality sound in foreground music, public address and paging applications. Its integrated, steel enclosure provides up to 20dB of noise reduction on the back of the speaker. The frame is constructed from extruded aluminum. Connection is made via a barrier strip that is covered with a steel plate that features a connection point for 0.5 conduit. Front View Back View Side View 613 mm e n c l o s u re 97 mm 4 mm 410 mm 51 mm Tweeter 26 sq cm planar Midrange 110 sq cm planar Woofer 729 sq cm planar a 51 mm voice coil Frequency Response 40Hz 150Hz ±3dB Transformer Primary Voltage 70V, 100V; 8-ohm bypass Transformer Primary Taps (70V): 0.5W, 1W, 2W, 4W, 8W, 16W, 32W; (100V): 1W, 2W, 4W, 8W, 16W, 32W Dispersion 170º hemispherical up to 10kHz Finish Paper surface ready for up to 3.2 mm flexible material and paint Overload Protection Three independent self-resetting gel switches (low and high) Cutout Dims 410 x 613 x 51 (without enclosure) 410 x 613 x 97 (with enclosure) Power Handling Sensitivity Enclosure Shipping Weight Environment Temperature 100 watts RMS 90dB (1W/1 metre) 357 x 560 x 54 11.25 kg (pair) -17.7 to +51.7 C! Specifications subject to change! Pliable, elastic material such as joint compound, plaster or wallpaper. Specifications subject to change.
Accessories PLACE SAVERS Reusable units designed to be installed in new construction to reserve locations for the speakers during the early stages of construction. At the appropriate time, the speaker installer removes the Place Saver and replaces it with the Invisible Series speaker. Available for the IS2, IS4, IS4 SST & ISW. Small Place Saver for IS2! Dimensions (W x H x D): 410 mm x 307 mm x 108 mm! Shipping Weight: 2.3kg each! Net Weight: 1.4kg each! Part No: SON-IS2PS Large Place Saver for IS4, IS4 SST & ISW! Dimensions (W x H x D): 410 mm x 613 mm x 108 mm! Shipping Weight: 3.6kg each! Net Weight: 2.3kg each! Part No: SON-IS4PS ACOUSTIC ENCLOSURES The 12.7 mm MDF enclosure provides sound containment,improves power handling and increases bass definition and clarity. Small Enclosure for IS2! Dimensions with speaker (W x H x D):! 357 mm x 256 mm x 54 mm! Shipping Weight: 2.7kg each! Part No: SON-92969 Large Enclosure For IS4, IS4 SST & ISW! Dimensions with speaker (W x H x D):! 357 mm x 560 mm x 54 mm! Shipping Weight: 5.4kg each! Part No: SON-92970 For further instructions on using SA Space Savers with new Invisible Series products, please refer to www.sonance.com/products/invisible or use QR code.
Invisible Series Associated Products Click product for more detail