MasterCool Refrigeration Side-by-Side Merging Combinations For SF Models 8mieleusa.com
Side-by-Side Merging Kit KSK 1002 SPECIFICATIONS KSK 1002 Item 38996010USA Electrical 110V / 120V, 60Hz, 15 Amps Electrical Requirements - Volts/Amps In a side-by-side installations, a separate outlet must be used for each appliance. Power Cord - Plug and length NEMA 1-15 plug, 9 3 ft (2.8 m) Support Call Miele 800.843.7231 Miele Website 8www.mieleusa.com 20/20 Link 82020technologies.com This merging kit should be used for side-by-side installation of the following models: - K 18x1 SF, K 19x1 SF, K 18x3 SF, K 19x3 SF - F 14x1 SF, F 18x1 SF, F 19x1 SF, F 14x3 SF, F 18x3 SF, F 19x3 SF - KF 18x1 SF, KF 19x1, SF, KF 18x3 SF, KF 19x3 SF - KWT 16x1 SF, KWT 16x3 SF For side-by-side installation of appliances with a stainless-steal front (SF), you also need a Top-frame. Please contact Miele to obtain a top-frame in the required width. The width of the Top-frame corresponds to the totale width of you side-by-side combination. Page 2 of 11
Side-by-Side Merging Kit KSK 1002 en en Side-by-side Side-by-side...without partition...without partition If the appliances are installed directly next to each other (without a partition), they need to be attached together. A heating mat must also be installed. This will help avoid condensation and prevent damages....with partition The...with minimum partition thickness ofthe partition is 5 / 8 "(16 mm). The minimum thickness ofthe partition If isthere 5 / 8 "(16 isamm). partition with athickness less from than 5 / 8 "(166 mm) 3 /4 (160 to6mm) 5 / 16 " (160 mm) between If there isthe apartition adjacent with appliances, athickness then each fromappliance 5 / 8 "(16 mm) should to6be 5 / 16 individually " (160 mm) installed betweenwithin the adjacent its ownappliances, niche usingthen mounting each appliance accessories shouldincluded. be individually installed within its own niche using the mounting accessories included. In this case, you will only need the heating mat from the "Merging Kit" to avoid condensation and prevent damages. If the appliances are installed directly next to each other (without a partition), If they theneed appliances to be attached are installed together. directly A next heating to each mat must other also (without be installed. a partition), This will theyhelp needavoid to becondensation attached together. and A prevent heating mat damages. must also be installed. This will help avoid condensation and prevent damages. 4 HEATING MAT TRANSFORMER PLUG DETAILS In this case, you will only need the heating mat from the "Merging Kit" to avoid In thiscondensation case, you willand onlyprevent need the damages. heating mat from the "Merging Kit" to avoid condensation and prevent damages. 4 4 9 foot- 120Volt- 15Amp 2-wire molded plug power supply Niche KSK1002 depth Merging under 25 kit must (635 be mm) used will when require combining the location of All the Installations Electrical must outlet(s) be done to be in accordance adjacent cabinetry with local codes Page 3 of 11
48 Side-by-Side Combination F14X3 SF & K1803 SF KFT1048SS Top frame piece must be used when combining Page 4 of 11
48 Side-by-Side Combination KWT 1613 SF & KWT 1603 SF KFT1048SS Top frame piece must be used when combining Page 5 of 11
54 Side-by-Side Combination F14X3 SF & K1903 SF KFT1054SS Top frame piece must be used when combining Page 6 of 11
54 Side-by-Side Combination KWT16X3 SF & K18X3/F18x3/KF18x3 SF KFT1054SS Top frame piece must be used when combining Page 7 of 11
60 Side-by-Side Combination F18X3 SF & K18X3 SF KFT1060SS Top frame piece must be used when combining Page 8 of 11
54 Side-by-Side Combination KWT16X3 SF & K19X3/F19x3/KF19x3 SF KFT1060SS Top frame piece must be used when combining Page 9 of 11
66 Side-by-Side Combination F18X3 SF & K19X3 SF KFT1066SS Top frame piece must be used when combining Page 10 of 11
72 Side-by-Side Combination F19X3 SF & K19X3 SF KFT1072SS Top frame piece must be used when combining Page 11 of 11