History of PKN. History of PKN

Similar documents
Standardization in the Construction Sector Sustainability assessment and Environmental Product Declarations

CEN strategies and plans for a global acceptance of the Eurocodes

Confused by standards Standards for social alarms

cooperation in standardization Gonçalo Ascensão Seminar Bridge Design with Eurocodes, JRC-Ispra, 1-2 October 2012

BSI the UK voice into European and national standards

The Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles

The European Standardization System. Diana Dus Programme Manager International Cooperation

Standards and Standardisation. An Overview

EU Best practice of Technical Committees and benefits that could be achieved

FAQs Radio Equipment Directive (RE-D)

REDCA update on the RED. Days to go. 17 May 2017

About European Standards

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 054/02)

Technical standards to support the evolution of technology enabled care services

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 209/02)

Using consumer appliances in Europe the consumer view

Overview of standardization and mandatory technical regulation systems of Turkmenistan. (gas and electricity)

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code

Road Map and Action Plan for Azerbaijan on harmonisation of standards and codes in electricity and gas sectors

CEN/TC 186 ISO/TC 244

Road Map and Action Plan for Republic of Uzbekistan on harmonisation of standards and codes in electricity and gas sectors

CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus

CONFORMITY ASSESSMENT - SUPPLIER'S

BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY

Biological evaluation of medical devices

Standardization through the European Committee for Standardization. Thomas Fischer SUB Göttingen

Overview of standardization and mandatory technical regulation systems of Belarus. (gas and electricity)

Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses

ILNAS-EN ISO :2017

CEN TC 10 (Lifts, escalators and moving walks) Introduction to EN 81-20/50 (revision of EN 81-1/2)

CEN and CENELEC Organisational description & functions International and regional activities

SOUTH AFRICAN NATIONAL STANDARD

COMMISSION DELEGATED REGULATION (EU) /... of

BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY

Standardization of diagnostic methods. Patrizia Rossi

Personal protective equipment - Safety footwear (ISO 20345:2011)

Standardization. Introduction to standardization for Aalto University Jukka Alve

GI Standardization Overview

COMMISSION DELEGATED REGULATION (EU) /... of XXX. on the classification of the frost resistance performance for clay tiles under EN 1304

Sýnishorn Maintenance - Qualification of maintenance personnel

Standardization, conformity attestation and accreditation in the Republic of Belarus. Valery N. Koreshkov, Chairman of Gosstandart

Business Plan CEN/TC 172 PULP, PAPER AND BOARD

BSI the UK National Standards Body: The Role of Standards

Contents. EN :2012 (E) Issue 5 ( ) Page

ILNAS-EN ISO 23640:2015

COMMISSION DELEGATED REGULATION (EU) /... of XXX

Paper and board - Determination of grammage (ISO 536:2012)

BUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY

COMMISSION DELEGATED REGULATION (EU) /... of XXX

When Standards meet experience and increase the value of PV. Dr. Francesco Groppi (CESI Middle East) Chairman of CENELEC/TC82

On , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

What is ACEC? FR-PM-1-1

The New Generationn of Firedoors

European Standards: Supporting the European Single Market for Services

Relevance of standards for tractors and agricultural machinery. Antoon Vermeulen, CNH Belgium N.V. June pages

BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS

English Version. This Technical Report was approved by CEN on 11 December It has been drawn up by the Technical Committee CEN/TC 135.

This document is a preview generated by EVS

NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES

Road Map and Action Plan for Ukraine on harmonisation of standards and codes in electricity and gas sectors

This document is a preview generated by EVS

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

Sýnishorn Safety of machinery - Permanent means of access to machinesry - Part 3: Stairs, stepladders and guard-rails

Safety standards relevant to Refrigeration, Air-Conditioning and Heat Pump equipment

1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres?

Guidance Note. Visual Alarm Devices: Conflict between BS 5839 and EN 54-23

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

BIOLOGICAL EVALUATION OF MEDICAL

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)

Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -

BUSINESS PLAN CEN/TC 49 GAS COOKING APPLIANCES EXECUTIVE SUMMARY

The standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar

Compilation of regulatory approaches used in various countries. Information received by the Secretariat through a survey in 2009

COMMISSION DELEGATED REGULATION (EU) /... of

Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels (ISO 23278:2006)

Sýnishorn Specifications for patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment

Proposal for a REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL. on appliances burning gaseous fuels. (Text with EEA relevance)

SOUTH AFRICAN NATIONAL STANDARD

BUSINESS PLAN CEN/TC 250 STRUCTURAL EUROCODES EXECUTIVE SUMMARY

ISO INTERNATIONAL STANDARD

Hexagon nuts Ð Product grade C

Plastic containers for intravenous injections (ISO 15747:2010)

ILNAS-EN ISO 2692:2006

Cosmetics - Good Manufacturing Practices (GMP) - Guidelines on Good Manufacturing Practices (ISO 22716:2007, Corrected version )

BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY

Medical gloves for single use - Part 2: Requirements and testing for physical properties

Camping tents (ISO 5912:2011)

EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE

Sýnishorn Fire resistance test for service installations - Part 1: Ventilation ducts

BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY

Resource efficiency and Circular Economy in the EU and Japan Overview of the EU Ecodesign and Energy Labelling schemes. Tokyo, 15 February 2016

Road vehicles Mopeds Symbols for controls, indicators and tell-tales

Animal and vegetable fats and oils - Sampling (ISO 5555:2001)

Energy management systems - Requirements with guidance for use (ISO 50001:2011)

GLOBAL GLOBAL OUTREACH OUTREACH REPORT 2016 REPORT Q4 2017

This document is a preview generated by EVS

C 183/10 Official Journal of the European Union

ISO 7439 INTERNATIONAL STANDARD. Copper-bearing intra-uterine contraceptive devices Requirements, tests

ILNAS-EN 50304:2001. Electric ovens for household use - Methods for measuring the energy consumption

Transcription:

History of PKN History of PKN 1923 On the initiative of ing. Piotr Drzewiecki Technical Committee for Standardization of Industrial Products and Their Delivery is being established at the Ministry of Trade and Industry (Pursuant to Regulation of Council of Ministers of 02.07.1923). 1923 Polish National Electrotechnical Committee (established as part of Association of Polish Electrical Engineers SEP) on the initiative of prof. Mieczyslaw Pozaryski becomes member of IEC. 1924 On the basis of a resolution adopted at the meeting of the Technical Committee for Standardization of Industrial Products and Their Delivery, Polish Committee for Standardization (P.K.N.) is being established and Polish Standard (PN)is being introduced as an official document for voluntary use formally confirmed in the Official Journal of Poland Polish Monitor of 1926). 1925 First PN published. 1925 P.K.N. started issuing its own publication News of P.K.N. 1942 Standardization work is being secretly resumed under the guidance of ing. Czeslaw Szczekowski standardization committees begin to operate and standards are being secretly sold and distributed among schools and individuals engaged in research. 1945 Polish Committee for Standardization (PKN) reinstated after the war. https://www.pkn.pl/node/255 1

1947 PKN becomes the charter member of ISO. 1949 The Act on Polish Committee for Standardization introduces standards as documents for mandatory use. 1950 At the request of the General Board of SEP, Polish National Electrotechnical Committeeis being included in the PKN. 1953 PKN becomes the central state administration body responsible for standardization. 1961 Act on Standardization confirms PKN status as a central state administration body. 1970 Co-operation between UN/ECE and PKN has been initiated. 1972 Pursuant to Act of 29.03.1972 PKN and Central Office of Measures merge together into the Polish Committee for Standardization and Measures (PKNiM). 1979 Pursuant to Act on Quality of Products and Services of 08.02.1979 Polish Committee for Standardization, Measures and Quality Control (PKNMiJ)is being established. 1991 PKNMiJ becomes an Affiliate of CEN and CENELEC. 1992 First two PN-EN approved. https://www.pkn.pl/node/255 2

1993 1994 Pursuant to Act on Standardization of 3.04.1993, PKNMiJ is dissolved and PKN (Polish Committee for Standardization) reinstated. The law introduces the voluntary system of standardization in Poland in accordance with the European practice. Polish standards acquire the status of documents for voluntary use. PKN becomes ETSI/NSO as a result of a signed Memorandum of Understanding with ETSI. 1995 PKN introduces voluntary Mark of Conformity with Polish Standards. 1996 National enquiry point of WTO/TBT is being established at PKN Office. 1997 Polish Standards database is being included in the PERINORM system. 1999 75th anniversary of the Polish Committee for Standardization. 2000 Act of 13.10.2000 on amending the Act on Standardization of 03.04.1993 allowed the adoption of European and international standards in the original language, hence creating the possibility for PKN membership in CEN and CENELEC. 2002 Act on Standardization of 12.09.2002 adopted. 2002 PKN applies for full membership in CEN and CENELEC. https://www.pkn.pl/node/255 3

2002 PKN started selling standards in electronic form. 2003 New Act on Standardization in force - new status of PKN - standardization system fully compatible with the European one. 2004 PKN becomes a Member of CEN and CENELEC on 1 st of January. 2004 80th anniversary of the Polish Committee for Standardization. 2004 PKN is granted the Certificate of Quality Management System affirming its conformity with the requirements of PN-EN ISO:9001. 2008 PKN launched an online store. 2009 PKN is granted the status of a mandated body in European Commission. 2010 PKN introduced a fully electronic process into the development of Polish Standards and into the work of Technical Committees. 2010 20 th of May named the Day of Polish Standardization. PKN introduced changes into the management of standardization work a sectoral approach is being implemented and new bodies are being established Sector Councils and Project Committees. PKN introduced educational policy towards institutions of higher education. https://www.pkn.pl/node/255 4

PKN introduced new electronic products: e-access and Standards Management Systems. PKN is granted the Certificate of Information Security Management Systems affirming its conformity with the requirements of PN-EN ISO/IEC 27001. 2012 PKN introduced a System of Digital Sales of Products and Services and a System for Management of Standardization Processes (PZN). 2012 Full conversion of current Polish Standards into XML format. 2012 The first meeting of CEN/TC 419 took place on the premises of PKN the first technical committee of CEN with secretariat allocated to Poland. https://www.pkn.pl/node/255 5