Bulletin 440N-S, 440N-Z, 440K, 440G Product Line Overview Safety Interlock (440N-S, 440N-Z, 440K, 440G) 6 / 2011 Bulletin 440N-Z 440N-S 440K 440G Type Standards Product Selection SensaGuard RF-ID Coded Non Contact Cat 4/SIL3/PLe rated switch even with mutliple units wired in series No dedicated controller Large sensing distances (up to 25 mm) Plastic or stainless steel housing options IP69K for all models Pre-wired or quick disconnect options Extended diagnostics Conform to standards EN 60947-5-3, IEC 61508, EN 954-1, EN ISO 13849-1 Sipha Magnetically Coded Non Contact Coded magnetic operation - resistant to defeat Plastic or stainless steel housing options Pre-wired or quick disconnect options Sensor, controller and contactor monitoring Selection of control units available Ideal for medium to high risk applications Conform to standards EN 60947-5-1, EN 1088 (ISO14119), EN ISO 12100, EN 60204-1 Tongue Operated Selection of actuators available Versions available with quick disconnect GD2 versions offer increased robustness Conform to EN 1088 (ISO 14119), EN 954-1, EN ISO 13849-1, EN 60947-1 and EN 60204-1 Guard Locking Selection of actuators available Versions available with quick disconnect Ideal for use in applications with machine run-down, ensuring the guard remains closed until hazardous motion has ceased Conform to EN 1088 (ISO 14119), EN 954-1, EN ISO 13849-1, EN 60947-1 and EN 60204-1 See page 5-3 See page 5-5 See page 5-6 See page 5-7 5-2 Visit our website: www.ab.com/catalogs Rockwell Automation
6 / 2011 Bulletin 440N-Z 440N-Z SensaGuard RF-ID Coded Non Contact No dedicated controller needed Cat 4/SIL3/PLe maintained even with switches wired in series Multiple actuator sizes for large sensing distance typically (15 25 mm) IP69K environmental rating Short circuit and over voltage protection Led located on the switch for door status and troubleshooting 2 Safety PNP outputs and 1 auxiliary PNP output Description 18 mm plastic barrel 18 mm stainless steel barrel Rectangular, standard model Rectangular, margin indication Rectangular, margin indication & magnetic hold Safety Outputs 2 Solid State Outputs Output Switching 1 Solid State Output Sensing Distance Connection Cat. No. 25 mm (0.98 in.) 10 mm (0.39 in.) 8-Pin Micro (M12) 440N-Z21S16H 3 m Cable 440N-Z21S16A 8-Pin Micro (M12) 440N-Z21S26H 3 m Cable 440N-Z21S26A 8-Pin Micro (M12) 440N-Z21S17H 3 m Cable 440N-Z21S17A 8-Pin Micro (M12) 440N-Z21SS2H 3 m Cable 440N-Z21SS2A 8-Pin Micro (M12) 440N-Z21SS2HN 3 m Cable 440N-Z21SS2AN 8-Pin Micro (M12) 440N-Z21SS2HN9 3 m Cable 440N-Z21SS2AN9 Connection Systems Cordset Patchcord Safety Wired T-Port Safety Wired Shorting Plug Description Replace symbol with 2 (2 m), 5 (5 m), or 10 (10 m) for standard cable lengths. Replace symbol with 1 (1 m), 2 (2 m), 3 (3 m), 5 (5 m), or 10 (10 m) for standard lengths. Cat. No. 889D-F8AB- 889D-F8ABDM- 898D-438Y-D8 898D-418U-DM See publication S116-CA001 for complete product information. Rockwell Automation Visit our website: www.ab.com/catalogs 5-3
Bulletin 440N-Z Accessories / Accessories 440N-Z Description 6 / 2011 Cat. No. 18 mm Plastic Actuator 440N-Z18PT 30 mm Plastic Actuator 440N-Z30PT 18 mm Stainless Steel Actuator 440N-Z18SST Large Rectangular Plastic Actuator Standard Model Standard Model Margin/Magnetic Hold 440N-ZPREC 440N-ZPRECM Mounting Bracket for Tubular Sensors Right Angle Style 871A-BRS18 Mounting Bracket for Tubular Sensors Clamp Style 871A-BP18 Snap Clamp Mounting Bracket 871A-SCBP18 Swivel/Tilt Bracket Allows ±10 Vertical and 360 Rotation Adjustment 60-2649 440N-Z Magnetically Coded Non-Contact Non-contact actuation Magnetic coded sensing LED indication for door status and troubleshooting Up to Cat. 4 per EN 954-1, SIL 3 (IEC 62061) and PLe (EN ISO 13849) can be achieved with suitable controller High tolerance to misalignment Designed for use with Allen-Bradley safety relays and controllers Type MC2 Operating Voltage/Input Current 24V DC, +10%/-15%/50 ma max. Safety Outputs 2 N.C. Solid- State Relays Outputs 1 x PNP, 0.2 A max.; Status: OFF (0V DC) Status Indicator Connection Cat. No. Yes 8-Pin Micro (M12) 440N-Z21W1PC 3 m Cable 440N-Z21W1PA 10 m Cable 440N-Z21W1PB 5-4 Visit our website: www.ab.com/catalogs Rockwell Automation
6 / 2011 440N-S Sipha Coded Non Contact Interlock Choice of heads multiple sensors can be connected to one controller Mechanical switches with 1 N.O. + 1 N.C. contacts can be included in the circuit Magnetically coded system Conform to EN 60947-5-1, EN 1088 (ISO 14119) Ideal for hygiene applications Controller doubles up as the safety relay CE, culus, TUV Bulletin 440N-S Head Style Safety Contacts 1 N.C. & 1 N.O. Safety Contacts 1 N.C. & 1 N.O. Cable Length Contacts Material Cat. No. 3 m (9.8 ft) None ABS plastic 440N-S32014 10 m (32.8 ft) None ABS plastic 440N-S32016 3 m (9.8 ft) 1 N.C. ABS plastic 440N-S32022 10 m (32.8 ft) 1 N.C. ABS plastic 440N-S32032 3 m (9.8 ft) 1 N.O. ABS plastic 440N-S32037 10 m (32.8 ft) 1 N.O. ABS plastic 440N-S32036 3 m (9.8 ft) None ABS plastic 440N-S32015 10 m (32.8 ft) None ABS plastic 440N-S32017 3 m (9.8 ft) 1 N.C. ABS plastic 440N-S32023 10 m (32.8 ft) 1 N.C. ABS plastic 440N-S32033 3 m (9.8 ft) 1 N.O. ABS plastic 440N-S32038 10 m (32.8 ft) 1 N.O. ABS plastic 440N-S32039 Controllers Type Supply Voltage Safety Outputs Control Unit 1 24V AC/DC 1 N.O. Control Unit 2 Sipha 6 24V AC/DC 110/230V AC Outputs Case Size Cat. No. 1 N.C. Solid State 22.5 mm 440N-S32013 2 N.O. 1 N.C. 45 mm 440N-S32021 2 N.O. + 1 N.O. delayed 1 N.C. 90 mm 440N-S32052 See publication S116-CA001 for complete product information. Rockwell Automation Visit our website: www.ab.com/catalogs 5-5
Bulletin 440K 440K Tongue Operated Metal and Plastic Bodies GD2 offer stainless steel heads for demanding applications All complete with actuator CE, culus, TUV Standards Conform to EN 1088 (ISO 14119), EN 954-1, EN ISO 13849-1, EN 60947-1 and EN 60204-1 6 / 2011 Model Safety Contacts Contacts Cadet 3 Cadet 3 3 N.C. Trojan T15 1 N.C. 1 N.O. Trojan T15 Standard 2 N.C. Trojan 5 Standard Trojan 5 GD2 MT-GD2 2 N.C. 2 N.O. MT-GD2 3 N.C. 1 N.O. Housing Material Conduit Entry Comment Cat. No. 1 x M16 DIN 50047 440K-C21061 1 x M16 DIN 50047 440K-C21097 3 x M20 440K-T11305 3 x M20 440K-T11303 M20 conduit 440K-T11090 3 x M20 GD2 440K-T11336 1 x M20 DIN 50041 440K-MT55076 1 x M20 DIN 50041 440K-MT55074 5-6 Visit our website: www.ab.com/catalogs Rockwell Automation
440G Guard Locking Safety Locks guard shut until open signal is given to interlock Conform to EN60947-5-1 and EN60204-1 Metal and Plastic Bodies LED Status Indication CE, culus, TUV Standards Conform to EN 1088 (ISO 14119), EN 954-1, EN ISO 13849-1, EN 60947-1 and EN 60204-1 Bulletin 440G Holding Force Supply Voltage 1600 N 24V AC/DC 1600 N 24V AC/DC 2000 N 24V AC/DC 2000 N 230V AC 2000 N 24V AC/DC 2000 N 230V AC 2000 N 24V AC/DC Material Painted Zinc Alloy Painted Zinc Alloy Safety Contacts Contacts Model Cat. No. 3 N.C. 1 N.O. 440G-MT 440G-MT47037 2 N.C. 2 N.O. 440G-MT 440G-MT47044 TLS-1 GD2 Release TLS-1 GD2 Release TLS-2 GD2 Lock TLS-2 GD2 Lock TLS-3 GD2 Release 440G-T27251 440G-T27123 440G-T27255 440G-T27129 440G-T27259 5500 N 24V AC/DC Die cast alloy Standard 440G-L07264 See publication S116-CA001 for complete product information. Rockwell_Safety_Interlock_Guard_Locking Overview_en_0611.pdf Helsinki tel. +358 9 540 4940 automation@klinkmann.fi St. Petersburg tel. +7 812 327 3752 klinkmann@klinkmann.spb.ru Moscow tel. +7 495 641 1616 moscow@klinkmann.spb.ru Yekaterinburg tel. +7 343 376 5393 yekaterinburg@klinkmann.spb.ru Samara tel. +7 846 273 95 85 samara@klinkmann.spb.ru Кiev tel. +38 044 495 33 40 klinkmann@klinkmann.kiev.ua Riga tel. +371 6738 1617 klinkmann@klinkmann.lv Vilnius tel. +370 5 215 1646 post@klinkmann.lt Tallinn tel. +372 668 4500 klinkmann.est@klinkmann.ee Мinsk tel. +375 17 200 0876 minsk@klinkmann.com