IGUANA circo wall-mounted istinctively elegant vertical radiators
Iguana Circo all-mounted imensions Product code: CIR ø C E 45 2.5 76 50 air vent G 1/8 ø C T H E 50 2.5 C 74 108 144 142 157 76 177 E 77 96 115 45 air vent G 1/8 H 95 min. 100 mm ith guard 230 mm ø35 Option: guard 130 Connections M M 4 5 ø Standard connection MM Top end connection 45 or 54 (1 number > flow) hen ordering a top end connection, no insert pipe should be ordered. Air vents should be positioned on the central heating pipes. Order code: Specify code 45 or 54 instead of MM - There is no extra charge. To guarantee the output of the Iguana models and to limit the pressure drop, Jaga recommends the use of tube diameters 16/2, 18/1 or 18/2. min. 100 mm ith guard 230 mm 95 Position flow and return pipe E ø35 ith connection sets 31-32-33-34-43-44 Note: flow and return can be reordered ø Option: guard 130 Position of Flow and return pipe E ith connection sets 41-42 All dimensions in mm Table Large Small Towel Hat ra
Outputs Outputs in watts at 75/65/20 C & 55/45/20 C, in accordance with EN442 code height length colour connection Order code: CIR 1 027 301 /MM (Example order code shown is for a 10mm high radiator, 270mm long H L 270 310 340 Supplied as Standard 10 1920 75/65/20 55/45/20 75/65/20 55/45/20 1 385 854 414 946 454 1009 489 1092 524 1164 564 Colours: 001 Sandblast grey metallic, 301 white or 333 traffic white Central connection MM underneath 2000 2200 75/65/20 55/45/20 75/65/20 55/45/20 887 433 961 476 1048 511 1136 563 1209 590 1311 649 H all fixing 2 chrome-plated air vents G 1/8 2400 75/65/20 55/45/20 1024 515 1210 609 1397 703 Pressure drop eight & water content mk mce ms mc bar 10 1 8 0.8 6 0.6 5 0.5 4 0.4 3 0.3 kpa 100 50 60 40 30 eight in kg H 270 310 340 10 28.7 33.8 39.0 2 0.2 1.5 0.15 20 15 1920 30.4 35.9 41.4 Pressure drop 1 0.8 0.6 0.5 0.4 0.3 0.1 0.08 0.06 0.05 0.04 0.03 0.2 0.02 0.15 0.015 10 8 5 6 4 3 2 1.5 2000 31.6 37.3 43.0 2200 34.5 40.8 47.0 2400 37.7 44.4 51.3 0.1 0.08 0.06 0.05 0.04 0.03 0.01 0.008 0.006 0.005 0.004 0.003 0.02 0.002 0.015 0.0015 0.01 0.001 10 2 3 4 6 8 2 3 4 6 8 100 1000 ater flow in kg/h 1 0.8 0.6 0.5 0.4 0.3 0.2 0.1 eight content in litre H 270 310 340 10 9.6 11.3 13.1 1920 10.2 12.1 13.9 2000 10.6 12.6 14.5 2200 11.7 13.8 16.0 2400 12.8 15.1 17.4
H Standard delivery : Table in beech nection, veneer no insert pipe should - Circo all mounted model with be ordered. Air vents should be central connection MM underneath Table COE 95 positioned on the Type central heating - wall fixing - 2 chrome-plated air M Mvents G 1/8 Table in beech pipes. Standard delivery : veneer 9087.012660 Circo ø 270 - Circo all mounted model with Option: guard Standard Options colours: central connection MM underneath min. 100 mm 9087.012730 Circo ø 310 660 730 0 sandblast grey metallic 001 ith guard 230 mm 9087.0120 COE Circo Type - wall fixing ø 340 white 301(RAL 9010 satin) ø35 130 500 550 600-2 chrome-plated Table air vents in G 1/8 white 333(RAL 9016 satin) beech veneer Large 9087.012660 shelf in beech veneer Large shelf in beech veneer 95 Circo ø 270 Table Large shelf Standard colours: ø 9087.012730 Circo ø 310 - sandblast grey metallic M M 001 9087.0120 COE Type 278 313 348 170 Option: Circo ø guard 340 - white 301(RAL 9010 satin) min. 100 mm - white 333(RAL 9016 satin) 9087.010637 Circo ø 270 660 730 0 Position ith guard flow 230 and mm Large shelf in beech veneer return pipe 637 672 707 ø35 130 500 550 600 9087.010672 Circo ø 310 312 329 347 9087.010707 COE Circo Type ø 340 Large shelf Table ø Small shelf iameter 278mmE Small 313mm 9087.010637 shelf in beech 348mm code height veneer Circo E ø 270 iameter 278mm313 348 313mm 170 348mm length Order 278 colour code: 313 conn. 348 Order 9087.010672 code: Order code: Circo ø 310 Order 278 code: 313 Order 348 code: Order 100 code: COE:CIR. 10 270 XXX /MM 9087.012660 9087.012730 9087.010707 COE 9087.0120 Circo Type ø 340 660 Position 730 flow 0 and return pipe 9087.010637 672 707 9087.010672 9087.010707 497 532 567 10 340 500 660 550 600 9087.011497 730 0 Circo ø 270 312 242 637 329 347 9 277 672 707 code height length colour conn. Small shelf in beech veneer 46 1092 500 9087.011532 COE:CIR. 10 Table 550 600 Circo ø 310 Large 270 shelf XXX /MM Small shelf 312 329 347 54 524 E 9087.011567 COE Circo E Type ø 340 Towel rail 100 170 10 340 ith connection sets Towel 9087.011497 31-32-33-34-43-44 rail chrome-plated Circo ith aluminium ø 270 connection sets 41-42 46 09 1092 Note: flow and return can be reordered 497 532 567 1164 660 637 730 672 0 9087.011532 Circo ø 310 707 COE Type 54 427 427 493 89 564 524 500 312 550 329 600 9087.011567 Circo ø 340 242 9 277 347 221 221 3 Small shelf in beech veneer Towel rail chrome-plated aluminium Large 9087.013427 Circo ø 270 Small shelf Towel rail chrome-plated aluminium Towel rail shelf 9087.013427 Circo ø 310 Hat rack 09 48 1164 1209 11 590 278 ith connection 313 348 sets 9087.013493 COE 31-32-33-34-43-44 100 Circo ith Type 89 564 170 ø 340 connection sets 41-42 Note: flow and return can be reordered Hat rack chrome-plated aluminium 427 427 493 637 497 672 532 707 9087.013427 Circo ø 270 567 427 427 493 9087.013427 Circo ø 310 221 221 3 48 36 1209 1311 312 242 329 9 347 277 COE Type 221 221 3 " 63 11 590 9087.013493 Circo ø 340 649 Small Hat rack iameter Towel shelf rail 278mm Hat 313mm 9087.014427 rack chrome-plated 348mm Circo aluminium ø 270 iameter 278mm 313mm 348mm sets 41-42 Order 278 278 code: 313 313 348 348 Order 9087.014427 code: 100Order code: Circo ø 310 Order code: Order code: Order code: 10 36 1397 1311 9087.011497 9087.011532 9087.014493 COE 9087.011567 Circo Type ø 340 9087.013427 9087.013427 9087.013493 09 63 703 649 427 427 493 497 427 532 497427 567 493 532 567 Connection 9087.014427 set with guard Circo ø (colour 270 to match radiator) 221 427 221 3 427 493 242 221 9 221 277 3 242 9087.014427 9 277 Circo ø 310 221 221 3 10 1397 Towel TO PIPE Hat rack rail 9087.014493 COE colour Circo ø 340 09 703 fill in sleeve coupling sets 41-42 278 278 313 313 348 348 Connection COIG.28L..3... set with... 270 guard (colour to match radiator) COIG.28L.C.3...... 270 Guard C TO PIPE 427 427 427 427 493 493 COIG.31L..3... COE colour... 310 fill in sleeve coupling 221 221 221 221 3 Hat rack chrome-plated 3 COIG.31L.C.3... aluminium... 310 COIG.28L..3...... 270 Hat rack COIG.34L..3...... 340 COIG.28L.C.3...... 270 COIG.34L.C.3...... 340 Guard C Thermostatic 278 head 313 348 COIG.31L..3...... 310 Remark: COIG.31L.C.3... For flow right... 310 (set 44), R instead of L. match radiator) Ex. COIG.34L..3... COIG.28R..3........ 340 C 427 427 493 TO 221 PIPE 221 3 COIG.34L.C.3...... 340 43 44 Remark: For flow right (set 44), R instead of L. match radiator) iameter 278mm Ex. 313mm COIG.28R..3.. 348mm... Flow left Flow right Guard C TO Order PIPE code: Order code: Order code: Thermostatic 9087.014427 head 9087.014427 Price incl. thermostatic 9087.014493 valve, lockshield and sleeve couplings. 43 44 of L. 427 For 427 connection to the 493 wall: order 2 curves. Flow left Flow right Guard C 221 ATTENTION: 221 floorboards 3need to be removed for the guard. 43 44 Price incl. thermostatic valve, lockshield and sleeve couplings. of L. Flow right For connection to the wall: order 2 curves. 43 d and sleeve couplings. of L. es. Flow left oved for the guard. d and sleeve couplings. 43 es. Flow left oved for the guard. d and sleeve couplings. es. 44 Flow right 44 Flow right ATTENTION: floorboards need to be removed for the guard. oved for the guard. All dimensions in mm
Connection Sets The order code of the connection set will be completed with the sleeve coupling code Set 31 For connection to the wall COE.M2.M.1... white COE.M2.MC.1... chrome COE.M2.MB.1... black Set 32 eco angled lockshield eco angled manual valve For connection to the floor eco straight lockshield COE.MF2.M.1... white COE.MF2.MC.1... chrome COE.MF2.MB.1... black Set 33 For connection to the wall COE.J2..1... COE.J2.C.1... eco straight manual valve eco angled lockshield Thermostatic heads Chrome/ hite C eco angled thermostatic valve Thermostatic head Set 34 For connection to the floor eco straight lockshield eco straight thermostatic valve Chrome COE.JF2..1... COE.JF2.C.1... Set 35 COE.JH2..1... For connection to the wall COE.JH2.C.1... ouble angled lockshield ouble angled thermostatic valve
Connection Sets The order code of the connection set will be completed with the sleeve coupling code Set 41 50 COE.P3..1... COE.P3.C.1... For connection to the wall eco-pro angled valve Thermostatic head Thermostatic valve Straight lockshield Cover plate Set 42 50 42 Standard Kv COE.PF3..1... COE.PF3.C.1... For connection to the floor eco-pro straight valve Thermostatic head Set 43 For connection to the floor or to the wall / flow left COIG.28L..3... 27 COIG.28L.C.3... 27 COIG.31L..3... 31 Thermostatic valve Thermostatic Straight valve lockshield Straight lockshield Cover plate Cover plate Straight lockshield Thermostatic valve Cover plate For connection to the wall with set 43 and set 44: order 2 curves COIG.31L.C.3... 31 COIG.34L..3... 34 COIG.34L.C.3... 34 M 24 Set 44 31 21 For connection to the floor or to the wall / flow right COIG.28R..3... 27 COIG.28R.C.3... 27 COIG.31R..3... 31 COIG.31R.C.3... 31 COIG.34R..3... 34 COIG.34R.C.3... 34 Straight lockshield Thermostatic valve Cover plate M 24 Curves 90 M24 x M24 Order code: 5095.020 31 21 M 24
Sleeve Couplings Included in the price of the connection sets Complete ordering code with sleeve couplings according to the material used and diameter of the tube. The correct type of sleeve coupling is determined by the ordering code of the connection set Example: COLO. P2.. 32. (insert relevant code from above) For Jaga valve - M24 For flexible steel or copper tube For synthetic tube Tube Tube 110 10/1 112 12/1 114 14/1 115 15/1 116 16/1 118 18/1 For tube 15/1 only For tube 18/1 only 212 12/2 214 14/2 219 16/1.5 216 16/2 217 17/2 218 18/2 For RPE/ALU tube Steel tube for CH Tube 314 14/2 Tube 501 316 16/2 503 3/8 326 16/2.2 318 18/2 Pro Key Tool for easy mounting of the Jaga Pro valve. 5090.1120
Correction factors Average correction factors according to EN442-75/65/20 C TV TL TR_20 30 35 40 45 50 55 60 65 70 75 85 90 20 0.63 0.69 0.75 0.81 0.87 0.94 1.00 1.07 1.13 1.20 1.27 1.34 1.41 1.48 24 0.54 0.59 0.65 0.71 0.77 0.83 0.90 0.96 1.03 1.09 1.16 1.23 1.29 1.36 85 20 0.57 0.63 0.69 0.75 0.81 0.87 0.94 1.00 1.07 1.13 1.20 1.27 1.314 24 0.48 0.54 0.59 0.65 0.71 0.77 0.83 0.90 0.96 1.03 1.09 1.16 1.23 20 0.51 0.57 0.63 0.69 0.75 0.81 0.87 0.94 1.00 1.07 1.13 1.20 24 0.43 0.48 0.54 0.59 0.65 0.71 0.77 0.83 0.90 0.96 1.03 1.09 75 20 0.46 0.51 0.57 0.63 0.69 0.75 0.81 0.87 0.94 1.00 1.07 24 0.37 0.43 0.48 0.54 0.59 0.65 0.71 0.77 0.83 0.90 0.96 70 20 0.41 0.46 0.51 0.57 0.63 0.69 0.75 0.81 0.87 0.94 24 0.32 0.37 0.43 0.48 0.54 0.59 0.65 0.71 0.77 0.83 65 20 0.35 0.41 0.46 0.51 0.57 0.63 0.69 0.75 0.81 24 0.27 0.32 0.37 0.43 0.48 0.54 0.59 0.65 0.71 60 20 0.30 0.35 0.41 0.46 0.51 0.57 0.63 0.69 24 0.23 0.27 0.32 0.37 0.43 0.48 0.54 0.59 55 20 0.26 0.30 0.35 0.41 0.46 0.51 0.57 24 0.18 0.23 0.27 0.32 0.37 0.43 0.48 50 20 0.21 0.26 0.30 0.35 0.41 0.46 24 0.14 0.18 0.23 0.27 0.32 0.37 45 20 0.16 0.21 0.26 0.30 0.35 24 0.13 0.17 0.22 0.26 0.31 40 20 0.10 0.14 0.18 0.23 0.27 24 0.12 0.16 0.21 0.26 35 20 0.06 0.10 0.14 0.18 24 0.08 0.12 0.16 30 20 0.03 0.06 0.10 24 0.05 0.08 KEY Tv = flow temperature Tr = return temperature Tl = desired air temperature The indicated outputs with ΔT 50 c and ΔT 30 c are the exact outputs. ΔT 50 c outputs are measured in accordance with en442 and ΔT 30 c outputs are calculated according to en442. An average correction factor is given in this table for outputs at other ΔT and is applicable for all dimensions. How to choose the right radiator? Rapid estimation of heat losses Calculate the volume of the room (L x x H) and multiply this by the atts/m³ figure given in the table below. Choose according to the level of insulation and the desired room temperature. Insulation 20 24 excellent 45 55 good 65 75 average 85 95 poor 100 115 required output in atts/m³ Example Use the table to determine the relevant correction factor with a water temperature of /60 c with a room temperature of 24 C. The correction factor = 0.90 required output 1000 watts : 1000 divided by 0.90 = 1111 watts therefore search in this leaflet s standard output table for a product with an output of at least 1111 watts. Alternatively use the radiator Finder search function on www.jaga.co.uk to identify all Jaga heating products with this required output. Output calculated in accordance with en442, at a water temperature of 75/65 C and a room temperature of 20 C (ΔT=50).
Product description Iguana Circo - wall-mounted Material Consists of vertical triangular steel radiation pipes, welded on steel positioning brackets. The radiation pipes are hydraulically connected using steel bends. Suitable for central heating. Finish The radiators are sandblasted, degreased, phosphated, electrostatically lacquered with epoxy-polyester powder and finally stove enamelled at 200 C. This high quality finish offers an optimal scratch resistance and is very easy to maintain. Thickness of the lacquer: min μ Pressure test: 9 bar orking pressure: 6 bar Colour The radiator is lacquered in the colour sandblast grey metallic 001 / white (RAL 9010) / white (RAL 9016) / other (see colour chart) How to install The building services engineer chooses the heating elements considering the following conditions: A heat output calculation according to the standard. Tables of heat outputs and dimensions for Iguana Circo wall mounted radiators according to EN 442. The radiators will be mounted to the wall with accessory brackets. The specially designed thermostatic connection sets / thermostatic Jaga eco / Jaga-Pro valves / manual Jaga eco valves can be connected to plastic central heating service pipes / RPE/ALU. tube / copper tube/ steel pipe. Jaga thermostatic heads / Jaga eco thermostatic heads chrome / Jaga eco thermostatic heads chrome/ white / Jaga Comap thermostatic heads silver / not to be / to be fitted. The Iguana Circo wall mounted model consists of triangular vertical radiation pipes welded on steel positioning brackets. The radiation pipes are hydraulically connected using steel bends, placed next to each other in half a circle. Supplied with wall brackets and 2 air vents G 1/8. Central connection, standard for 2 pipe. Options All options have the same radius as the radiator. They can also be ordered and fitted afterwards. Towel rail and fixings in chrome-plated aluminium. Hat rack and fixings in chrome-plated aluminium- Including 5 coat hooks. Small shelf in beech veneer with chrome-plated fixings. Shelf width: 100mm. Large shelf in beech veneer with chrome-plated fixings. Shelf width: 170mm. eco connection sets and valves 2 pipe. Table in beech veneer with supports and fixings in chromeplated aluminium. eco Pro connection sets and valves 2 pipe. Guard with thermostatic valve, return valve for invisible connection to the wall or to the floor. Floorboards need to be removed for the guard.
Jaga colours For Iguana Circo - wall-mounted RAL 9010 201 301 hite 212 312 Bahama 222 322 Capri RAL 9001 202 302 Off-white RAL 6009 213 313 English Green 223 323 Natural Special Colours RAL 7035 203 303 Light Grey 214 314 hisper Rose 224 324 Edelweis 001 Sandblast Grey Metallic RAL 9005 204 304 Black RAL 5018 215 315 Turquoise 2 3 Jasmine 002 Hammerstroke Silver/Black 205 305 Pergamon 206 306 Manhattan RAL 17 216 316 Bermuda 217 317 Chocolate Brown RAL 3003 226 326 Ruby Red 228 328 Classic hite 003 Claret Metallic RAL 5003 RAL 7011 208 308 Sapphire Blue 209 309 ark Grey RAL 5015 RAL 4008 218 318 Azure 219 319 Violet RAL 6000 229 329 Patina Green 230 330 Aloa Blue RAL 9006 005 Smooth Grey Metallic 006 Aluminium RAL 1004 210 310 Golden Yellow 220 320 Aegean RAL 7016 231 331 Anthracite Grey 007 Anthracite Metallic RAL 3000 211 311 Flaming Red 221 321 Calypso 232 332 Sunrise 008 Anthracite Structure RAL 9016 233 333 Traffic hite As it s impossible to reproduce colours with 100% accurancy, this colour chart is intended as a guide only. Colour swatches are available on request.
Jaga Guarantee Information 1 The guarantee is valid only if the equipment is properly and correctly used, by its first owner and if installed in accordance with the norms and instructions as detailed in the instruction leaflet and current industry standard practices. 2 The guarantee only applies to the equipment and the spare parts supplied by Jaga. Jaga has the choice between repair and replacement of the equipment or the spare parts. If any modifications have been made by Jaga to the standard product design, Jaga reserves the right to replace the guaranteed equipment with equivalent products or spare parts. 3 The period of guarantee is mentioned in this certificate. The guarantee decreases every year on a straight line basis by an equal percentage in order to reach a zero guarantee at the end of the guarantee period (e.g. for a period of 10 years the annual decrease of the guarantees 10% of the invoiced value). Repaired or replaced product is guaranteed through to the end of the original guarantee period. 4 The guarantee is valid only on products displaying the appropriate identification information concerning product type and series. No guarantee is granted on equipment or spare parts lacking this information, on equipment where this information has been removed or altered, or on equipment that has been repaired or modified by persons not authorised by Jaga to carry out this work. 5 The customer is responsible for any damage caused as a result of errors in installation or use of incorrect fittings, or for any damage caused by electrical connections, faulty or damaged electrical installations or appliances, erroneous voltage or hydraulic pressure and all other errors not directly related to the product delivered by Jaga. The guarantee is also revoked when unsuitable parts or components are used. The guarantee for our heat exchangers is not valid if they are regularly drained, or if they are heated by means of industrial water, steam or water saturated by excessive quantities of oxygen. The quality of the system ater has to be in accordance with the VI 2035-2 directives. The guarantee is also not applicable if the heat exchangers are placed in unsuitable atmospheric surroundings, such as but not exclusively ammonia, caustic substances etc. 6 This guarantee excludes damage due to incorrect handling and/or use of the equipment, or due to formation of lime deposits, incorrect use of the safety valve, or to all equipment that is incorporated into the building in a way that means it cannot be accessed normally. 7 Any work undertaken or product supplied as a result of a guarantee claim that proves not to be valid will be charged for. Product supplied will be invoiced at the customer s standard purchasing terms, and labour will be charged at 50 per hour with a minimum labour charge of 200. 8 The guarantee period starts from the date of the invoice for supply of the products covered by the guarantee. If the invoice is not available, the date of production will be used based on the product I number/series. 9 Only the courts of judicial district Hasselt (Belgium) are authorised to deal with disputes arising from this guarantee. It will apply Belgian law even when sales involved are subjects of EU member states as well as non-eu member countries. Casings and components Valves for Low-H2O heat exhangers