Heating Controls Thermostatic and Manual Radiator Valve range

Heating ontrols Thermostatic and Manual Radiator Valve range

Heating ontrols New thermostatic and manual radiator valves with built-in energy saving solutions With increasing demands on specifiers and installers to lead the way in saving energy at every possible opportunity, the innovative new Terrier elmont range of radiator valves has arrived with perfect timing. nd because it s been developed and manufactured by Pegler Yorkshire in close consultation with the commercial and social housing sectors, it s a range that incorporates as standard many features which others charge as extra-cost options. It s also a product which has grown out of the highly successful and industry-leading Terrier brand for many years the UK s biggest name in domestic manual and thermostatic radiator valves. Terrier elmont offers the complete and cost-effective solution for both new and replacement installations. omprehensive testing ensures every Terrier elmont product meets stringent ritish and European standards for guaranteed performance, with TRVs approved to EN25 and Manual Valves approved to S2767. 2

Key features Easy maintenance and servicing to minimise downtime: vital in commercial and social housing applications and satisfying the Tenants harter. Enables compliance with revised uilding Regulations to increase energy efficiency. Patented locking facilities on new tamperproof Terrier elmont thermostatic radiator valves are highly effective at achieving greater energy efficiency in commercial applications such as schools, hospitals and colleges. Ideal and reliable cost-effective solutions for new and replacement installations. Onsite time savings thanks to innovative new no-drain feature: change working components glands without draining the system. Thermostatic Radiator Valves New pre-setting TRV body prevents disruption of system balancing. ritish made: designed, engineered and manufactured in the UK. Exhaustive internal and external testing plus full compliance with all relevant UK and EU standards. Page 4 Thermostatic Heads Liquid element Patented lift and lock mechanism Thermal head cover ompensator Page 5 Securing ring Gland Valve odies and ccessories Spindle Threaded connection Pages 6 and 7 Nipple (compression) oss/pipe Manual Radiator Valves Guarantee elmont valves are guaranteed for 5 years against manufacturing defects. To qualify for these guarantees, products must be installed in accordance with our instructions on specified applications. Pages 8 and 9 Flow harts Pages 0 and 3

4452/4 Key operated tamper resistant feature (patented) When in a locked down operation a further tamper resistant feature is available by adjusting the internal ring. 445/4 Thermostatic Radiator Valves elmont thermostatic radiator valves have been designed for use on commercial through to residential properties including combi boiler installations. The elmont TRV benefits from a frost setting where the valve is opened automatically at 7º to prevent the system freezing and has a built-in patented tamper resistant feature that is key operated. The TRV also employs a patented lift and lock operation which prevents accidental adjustment. Key features ontrol range of to 29 Frost setting at 7 Positive shut off for maintenance purposes Range limiting locking customised temperature setting pproved to EN25 Suits copper and iron pipework* Matching manual radiator valves 0 bar rating suitable for combi boilers Horizontal and vertical mounting Patented unique lift and lock tamper resistant mechanism 3 T 2 T T The head is now locked. To restore temperature adjustment to the head remove locking ring and refit as shown. Reposition locking ring off-setting the lugs as shown and push firmly home. lign removal tool into the head grooves and engage. Engage the locking ring by twisting. TRV operation (patented) Remove the ring by pulling downwards. Reposition ring to lock (see ). TRV specifications PTTERN NO. SIZE ND DESRIPTION OX QTY ODE 445/4 /2" x 5mm x /2", angle horizontal, 68600 TRV, chrome plate 4452/4 /2" x 5mm x /2", angle vertical, 686002 TRV, chrome plate 4 3 2 6 5 4 3 2 6 5 4 3 2 D E 4 42 LIFT TURN LOK Specification clause elmont omplete TRV specification Thermostatic radiator valves shall be approved to EN25, the thermal head will have a lift and lock mechanism and an anti adjustment lock down mechanism. The valve body will be of a chrome plate finish and with bi-directional reverse flow technology. The TRV will be suitable for central heating two pipe systems and suitable for use with up to 0 bar system pressure. The omplete TRV will be suitable for use with copper compression and screwed iron connections. The TRV will have a guarantee of 5 years against manufacturing defect and must be drawn from the 42 E 445/4 DIMENSIONS 5 4 2 3 42 F PTTERN NO. SIZE D E 445/4 /2" x 5mm x /2" 34 04 53 84 53 4452/4 /2" x 5mm x /2" 52 04 34 84 53 D 4452/4 elmont range from Pegler Yorkshire. For flow chart information see pages 0 and *Pegler Yorkshire have a range of push and press connectors in the Tectite range for use with plastic, carbon steel or copper piping.

Thermostatic Heads hoice of different thermal heads is available: standard, remote sensing with 2m/8m capillary and remote adjusting in 2m, 5m and 8m capillary lengths. This makes the elmont solution the first choice for those looking for the benefits of the latest products and service in a cost-effective package. 40/4 30/4 70/4 The remote adjusting unit is especially suited to low surface temperature radiators and can also be positioned away from the radiator when using the sensing head behind a permanent fixture. Thermostatic head specifications and temperature settings ll dimensions are in mm. dimension for body type refer to page 3. Maximum diameter of head 63mm. PTTERN NO. DESRIPTION OX QTY ODE 30/4 Liquid TRV head with zero position 686005 40/4 Liquid TRV head with 686006 (2m) 2m remote sensor 40/4 Liquid TRV head with 686009 (8m) 8m remote sensor 30/4 87 UNLOKED 84 LOKED 0 Shut off * 7º 53.0 Temperature settings 3º 87 UNLOKED 84 LOKED 2 5 7º For flow chart information see pages 0 and 53.0 3 9 2º 40/4 00.0 4 22 25º 39.0 5 27 29º PTTERN NO. DESRIPTION OX QTY ODE 70/4 Liquid TRV head with 6860 (2m) 2m remote adjuster 70/4 Liquid TRV head with 68602 (5m) 5m remote adjuster 70/4 Liquid TRV head with 68603 (8m) 8m remote adjuster 33.0 70/4 64.7 75 UNLOKED 72 LOKED 85.0 85.0 Deviations of a few degrees (K) are possible according to the mode of installation and design of the heating system. If the approximate temperature values specified in the temperature setting table cannot be reached please contact your heating specialist. 5

ngle horizontal V390/4 Straight Valve V490/4 ngle vertical V290/4 ngle horizontal preset V390/4P Straight Valve preset V490/4P ngle vertical preset V290/4P *Pegler Yorkshire has a range of push and press connectors in the Tectite range for use with plastic, carbon steel or copper piping. Thermostatic Radiator Valve odies elmont thermostatic radiator valves comprise of three different body patterns: angle, horizontal and straight. They have a choice of pre-setting and non pre-setting options. Key features ngle vertical body specifications and dimensions (mm) pproved to EN25 Suits copper and iron pipework direct* 0 bar rating suitable for combi boilers Horizontal and vertical mounting Insert removal and replacement without draining down when using special tool ll valves are suitable for 2 pipe systems Specification clauses elmont odies specification Thermostatic radiator bodies shall be approved to EN25. The valve body will be of a chrome plate finish and with bi-directional reverse flow technology. The TRV will be suitable for central heating two pipe systems and suitable for use with up to 0 bar system pressure. The TRV will be suitable for use with copper compression and screwed iron connections. The TRV will have a guarantee of 5 years against manufacturing defect and must be drawn from the elmont range from Pegler Yorkshire. elmont Preset odies specification Thermostatic radiator bodies shall be approved to EN25. The valve body will be of a hrome plate finish and with bi-directional reverse flow technology. The TRV will be suitable for system balance with built-in preset mechanism. The TRV will be suitable for central heating two pipe systems and suitable for use with up to 0 bar system pressure. The TRV will be suitable for use with copper compression and screwed iron connections. The TRV will have a guarantee of 5 years against manufacturing defect and must be drawn from the elmont range from Pegler Yorkshire. Dimensions OX PTTERN NO. DESRIPTION SIZE QTY ODE V290/4 ngle vertical /2"/5mm x /2" 53 36 34 686032 V290/4P ngle vertical preset /2"/5mm x /2" 53 36 34 686082 V290/4 ngle vertical 3/4"/22mm x 3 /4" 63 37 38 686033 V290/4P ngle vertical preset 3/4"/22mm x 3 /4" 63 37 38 686083 ngle horizontal body specifications and dimensions (mm) Dimensions OX PTTERN NO. DESRIPTION SIZE QTY ODE V390/4 ngle horizontal /2"/5mm x /2" 34 36 53 686030 V390/4P ngle horizontal preset /2"/5mm x /2" 34 36 53 686080 V390/4 ngle horizontal 3/4"/22mm x 3 /4" 38 37 63 68603 V390/4P ngle horizontal preset 3/4"/22mm x 3 /4" 38 37 63 68608 Straight valve body specifications and dimensions (mm) Dimensions OX PTTERN NO. DESRIPTION SIZE QTY ODE V490/4 Straight valve body /2"/5mm x /2" 43 4 5 686034 V490/4P Straight valve body preset /2"/5mm x /2" 43 4 5 686084 V490/4 Straight valve body 3/4"/22mm x 3 /4" 45 47 62 686035 V490/4P Straight valve body preset 3/4"/22mm x 3 /4" 45 47 62 686085 For flow chart information see pages 0 and. 6

Pre-setting mechanism Insert Gland Valve system using TRV Hot Water Water Mains lternatively balancing can be achieved through lockshield but is lost when demounting/ maintenance of radiator (effect of accidental adjustment) Valve system using pre-setting TRV Hot Water Water Mains Lockshields become Isolating Valves F F2 F3 F4 F5 F6 F7 F8 F9 F0 F F F2 F3 F4 F5 F6 F7 F8 F9 F0 F TRV TRV alancing your system can be laborious and time consuming. Using a lockshield to balance the system is common, but with accidental or intentional adjustment, the system can become unbalanced, reducing the efficiency of your heat output. The closing of a lockshield, the removal of radiator for replacement or decorating purposes can affect the system. Using a presetting valve provides a unique solution without installing any additional products other than a TRV. The presetting valve should be applied on all radiators ideally on the flow end. On each valve the gland can be adjusted to control flow allowing pressure to be redirected to the next radiator in line. This is repeated on all radiators in the application allowing the system to be balanced. This benefit allows the lockshield to become an isolating valve and ensures that any accidental adjustment can be easily corrected, additionally when radiators are removed or replaced the setting on the valves will remain, saving precious time and avoiding commissioning. ccessories Rely on Pegler Yorkshire to supply dedicated accessories and tools for installation and maintenance of the Terrier elmont range. PTTERN NO. DESRIPTION SIZE OX QTY ODE N/ elmont TRV One size 20 68602 Security lip PTTERN NO. DESRIPTION SIZE OX QTY ODE N/ Security lip One size 68603 Release Tool PTTERN NO. DESRIPTION SIZE OX QTY ODE N/ opper ompression 22mm for 0 68607 Fitting (lack cap only) 3/4" valve bodies PTTERN NO. DESRIPTION SIZE OX QTY ODE N/ Remote Sensor Housing One size 6867 PTTERN NO. DESRIPTION SIZE OX QTY ODE N/ Retaining lips for One size 0 68604 apillary Tube sets PTTERN NO. DESRIPTION SIZE OX QTY ODE RG205/3 Gland/head Removal Tool (III) One size 68600 RG205/4 Gland/head Removal Tool (IV) One size 686200 PTTERN NO. DESRIPTION SIZE OX QTY ODE N/ Iron Pipe onnection /2" 0 68605 without Nut 3/4" 0 68606 PTTERN NO. DESRIPTION SIZE OX QTY ODE 30-0/4 Locking/Limiting Pins One size 20 6860 40-0/4 7

Manual Radiator Valves The new manual radiator valve range offers both traditional handwheel and lockshield styles, along with a new concealed lockshield style in both angled and straight patterns. no drain solution on manual valves allows the spindle O ring s seal to be changed with the system still full of water. The whole headwork may be changed without draining by using a gland removal tool. These features minimise down time, saving both cost and time on site. Innovations introduced for the first time include a concealed lockshield cap on the manual radiator valve, which requires an allen key to adjust the flow. The lockshield provides tamper resistance, this prevents accidental or vandal adjustment in public areas and ensures protection for system balance. Key features Suits a wide range of commercial applications Valves can be serviced without draining the system pproved to S2767-0 oncealed lockshield with allen key adjustment ompression or iron end connection direct* 97LS LS35/3 Tamper resistant lockshield adjustment by allen key Wheel head angle pattern specifications and dimensions (mm) Dimensions OX PTTERN NO. DESRIPTION SIZE QTY ODE 97WH Matt brass /2"/5mm x /2" 53 63 35 68000 97WH Matt brass 3/4"/22mm x 3 /4" 63 56 56 680004 97WHP hrome plate /2"/5mm x /2" 53 63 35 680007 97WHP hrome plate 3/4"/22mm x 3 /4" 63 56 56 68000 8 For flow chart information see pages 0 and. *Pegler Yorkshire have a range of push and press connectors in the Tectite range for use with plastic, carbon steel or copper piping.

Wheel head straight pattern specifications and dimensions (mm) Dimensions OX PTTERN NO. DESRIPTION SIZE QTY ODE 98WH Matt brass /2"/5mm x /2" 05 78 6800 98WH Matt brass 3/4"/22mm x 3 /4" 30 83 68004 98WHP hrome plate /2"/5mm x /2" 05 78 68007 98WHP hrome plate 3/4"/22mm x 3 /4" 30 83 6800 Lockshield drainoff angle valve specifications and dimensions (mm) Dimensions OX PTTERN NO. DESRIPTION SIZE QTY ODE 97DLSP hrome plate /2"/5mm x /2" 8 63 35 680009 Lockshield angle valve specifications and dimensions (mm) Dimensions OX PTTERN NO. DESRIPTION SIZE QTY ODE 97LS Matt brass /2"/5mm x /2" 53 63 35 680002 97LS Matt brass 3/4"/22mm x 3 /4" 6 64 4 680005 97LSP hrome plate /2"/5mm x /2" 53 63 35 680008 97LSP hrome plate 3/4"/22mm x 3 /4" 6 64 4 6800 Lockshield straight valve specifications and dimensions (mm) Dimensions OX PTTERN NO. DESRIPTION SIZE QTY ODE 98LS Matt brass /2"/5mm x /2" 05 78 68002 98LS Matt brass 3/4"/22mm x 3 /4" 30 83 68005 98LSP hrome plate /2"/5mm x /2" 05 78 68008 9866P hrome plate 3/4"/22mm x 3 /4" 30 83 680 Lockshield tamperproof angle valve specifications and dimensions (mm) Dimensions OX PTTERN NO. DESRIPTION SIZE QTY ODE LS35/4 hrome plate /2"/5mm x /2" 53 39 35 686050 LS35/4 hrome plate 3/4"/22mm x 3 /4" 6 40 4 68605 Lockshield tamperproof straight valve specifications and dimensions (mm) Dimensions OX PTTERN NO. DESRIPTION SIZE QTY ODE LS352/4 hrome plate /2"/5mm x /2" 05 54 686052 LS352/4 hrome plate 3/4"/22mm x 3 /4" 30 59 686053 For flow chart information see pages 0 and 9

Technical specifications TRV Nominal Flow Nominal Flow kg/h Seat uthority a 265 0.89 kg/h Seat uthority a 206 0.90 0. S-K 0.44 0.84 Max. 2.53 S-K Max 0. S-K 0.23 0.52 Max..74 S-K Max 0.0 0 00 000 0000 0.0 0 00 000 0000 Nominal Flow kg/h Seat uthority a 220 0.90 Nominal Flow kg/h Seat uthority a 265 0.85 0. S-K 0.38 0.74 Max..94 S-K Max 0. S-K 0.44 0.84 Max. 2.5 S-K Max 0.0 0 00 000 0000 0.0 0 00 000 0000 TRV - preset ¾" ngle & Reverse ngle Pattern Forward & Reverse Flow Pre-setting 0. 0.0 0.0 Nominal / haracteristic Flow Setting kg/h Seat uthority a 0 0 0 75 0 2 205 0 3 265 0.3 4 265 0.65 5 265 0.73 6 265 0.80 7 265 0.84 8 265 0.87 9 265 0.8 8 Position k v S-K 0.45 0.84 0 0.00 0.24 2 0.65 3.0 4.42 5.62 6.90 7 2.2 8 2.3 9 2.47 0 00 000 0000 ½" ngle and Reverse ngle Pattern Reverse Flow Pre-setting 0. Nominal / haracteristic Flow Setting kg/h Seat uthority a 0 45 0.00 64 0.00 2 220 0.38 3 220 0.68 4 220 0.8 5 220 0.88 6 220 0.9 7 220 0.94 8 220 0.95 9 220 0.96 S-K 0.26 0.70 0 0.08 0.48 2 0.83 3.7 4.42 5.63 6.76 7.85 8.94 9 2.03 0 00 000 0000 S-K 0 Position Position 2 Position 3 Position 4 Position 5 Position 6 Position 7 Position 8 Postion 9 Position S-K 0 Position Position 2 Position 3 Position 4 Position 5 Position 6 Position 7 Position 8 Position 9 Position 0.0 ½" ngle and Reverse ngle Pattern Forward Flow Pre-setting 0. 0.0 0 00 000 0000 ¾" Straight Pattern Forward Flow Pre-setting 0. Nominal / haracteristic Flow Setting kg/h Seat uthority a 0 44 0.00 5 0.00 2 206 0.32 3 206 0.63 4 206 0.73 5 206 0.80 6 206 0.85 7 206 0.89 8 206 0.9 9 206 0.94 S-K 0.23 0.56 0 0.09 0.48 2 0.75 3.0 4.6 5.32 6.47 7.56 8.67 9.77 Nominal / haracteristic Flow Setting kg/h Seat uthority a 0 0 0 25 0 2 50 0 3 240 0 4 265 0.46 5 265 0.68 6 265 0.77 7 265 0.80 8 265 0.8 9 265 0.83 S-K 0.45 0.84 0 0.00 0.08 2 0.47 3 0.76 4.4 5.47 6.76 7.88 8.94 9 2.0 0 00 000 0000 S-K 0 Position Position 2 Position 3 Position 4 Position 5 Position 6 Position 7 Position 8 Postion 9 Position S-K 0 Position Position 2 Position 3 Position 4 Position 5 Position 6 Position 7 Position 8 Postion 9 Position For product details see pages 6 and 7 0

0. 0.0 0. 0.0 Nominal Flow kg/h Seat uthority a 265 0.80 S-K 0.44 0.84 Max..87 0 00 000 0000 Nominal Flow kg/h Seat uthority a 95 0.77 S-K 0.25 0.54 Max..3 0 00 000 S-K Max S-K Max Technical overview Nominal flow rates /2" angle and reverse angle forward flow 206kg/h /2" angle and reverse angle reverse flow 220kg/h /2" straight pattern forward and reverse flow 95kg/h 3/4" patterns 265kg/h Maximum static pressures 0bar at 20 Maximum differential pressures 0.6bar Hysteresis 0.5k Differential pressure influence ll variants forwards 0.5k ll variants reverse -0.25k Water temperature influence Fixed thermal head 0.9k Remote sensing and remote adjusting heads 0.5k Response time ll TRV head variants - vertical 24 minutes ll TRV head variants - horizontal 20 minutes Manual radiator valves Pressure Differential ar Manual Handwheel and Lockshield Flows 0. 0.0 ¾" Straight Pattern Reverse Flow Pre-setting 0. 0.0 Nominal / haracteristic Flow Setting kg/h Seat uthority a 0 0 0 25 0 2 50 0 3 240 0 4 265 0.44 5 265 0.6 6 265 0.65 7 265 0.72 8 265 0.75 9 265 0.77 Position k v S-K 0.45 0.84 0 0.00 0.08 2 0.47 3 0.76 4.2 5.34 6.42 7.58 8.68 9.74 0 00 000 0000 ½" Straight Pattern Forward and Reverse Flow Pre-setting 0. Nominal / haracteristic Flow Setting kg/h Seat uthority a 0 40 0.00 30 0.00 2 95 0.22 3 95 0.43 4 95 0.62 5 95 0.69 6 95 0.78 7 95 0.80 8 95 0.8 9 95 0.82 Position Kv S-K 0.25 0.55 0 0.45 0.68 2 0.82 3 0.98 4.04 5.06 6.2 7.4 8.7 9.20 0 00 000 0000 S-K 0 Position Position 2 Position 3 Position 4 Position 5 Position 6 Position 7 Position 8 Postion 9 Position S-K 0 Position Position 2 Position 3 Position 4 Position 5 Position 6 Position 7 Position 8 Position 9 Position Pressure Differential ar 0.0 00 Straight pattern forward flow (ar) (l/h) 0.0 24.8 248.0 kv 2.5 ngle pattern forward flow (ar) (l/h) 0.0 276.4 2764.0 kv 2.76 oncealed Lockshield Flows 0. 0.0 00 Straight pattern forward flow (ar) (l/h) 0.0 23. 230.9 kv 2.3 ngle pattern forward flow (ar) (l/h) 0.0 289.9 2898.7 kv 2.90 000 Flow l/h ngle pattern reverse flow (ar) (l/h) 0.0 258.4 2584.3 kv 2.58 For product details see pages 8 and 9 000 Flow l/h ngle pattern reverse flow (ar) (l/h) 0.0 267.8 2678.0 kv 2.68 0000 Straight pattern reverse flow (ar) (l/h) 0.0 203.9 2039. kv 2.04 0000 Straight pattern reverse flow (ar) (l/h) 0.0 203. 2030.7 kv 2.03 For product details see pages 6 and 7 For product details see pages 8 and 9

Heating ontrols For further information, please contact your appropriate Sales Office The perfect commercial partnership UK Northern team: Telephone: 0870 20028 Fax: 0302 56008 Southern team: Telephone: 0870 200282 Fax: 0302 560458 Western team: Telephone: 0870 200283 Fax: 0302 56009 Eastern team: Telephone: 0870 200282 Fax: 0302 560458 Email: uk.sales@pegler.co.uk Pegler is an expert in the production of Taps, Mixers and Valve products. It boasts an unrivalled track record for integrity, quality, reliability and innovation. Yorkshire is a specialist in the production of metal plumbing and heating fittings. It has an established reputation for manufacturing quality products. EXPORT Telephone: +44 (0) 302 855656 Fax: +44 (0) 302 73053 Email: export@pegler.co.uk Technical helpline: 0870 200285 LUXURY TP SOLUTIONS INTEGRL SOLDER RING FITTINGS THE PUSH-FIT JOINTING SYSTEM Pegler Limited, St. atherine s venue, Doncaster, South Yorkshire, DN4 8DF, England. www.pegleryorkshire.co.uk HETING ONTROLS VLVES ND FITTINGS THE PRESS-FIT JOINTING SYSTEM Registered ompany No. 094543. Place of Registration: England ll brand names and logo styles are registered trademarks. Maintaining a policy of continual product development, Pegler Ltd reserves the right to change specifications, design and materials of products listed in this leaflet without prior notice. LIT.REF: 880.05.08 UTILITY TP SOLUTIONS OMPRESSION FITTINGS END FEED FITTINGS OMMERIL VLVES