TEST EQUIPMENT POWER METERS, LIGHT SOURCES Kingfisher KI-9800 Light Source Kingfisher KI-3800 Light Source Inexpensive handheld source for testing and commissioning optical fibre networks. Compact and rugged, simple to operate, 600 Hour battery life, versatile test tone generator with a wide range of source options this light source incorporates Autotest function allowing automatic switching between wavelengths. Shirt pocket size light source available with LED & LASER sources for general testing and maintenance, singlemode and multimode applications and for fibre identification. Battery life >25 hrs. OFS-KI3810-MP 850 LED Source OFS-KI3812-MP 850/1300nm LED Source, 1 Port, MM OFS-KI3820-MP 1310nm LASER Source, 1 Port, SM OFS-KI3822-MP 1310/1550nm LASER Source, 1 Port, SM OFS-KI3822-APC-MP 1310/1550nm LASER Source, 1 Port, SM, APC Connector Interface OFS-KI9812 850/1300nm LED Source Kingfisher KI-3600 Power Meter OFS-KI9822 1310/1550nm LASER Source OFS-KI9809 660nm LED Source,1mm POF, fixed SMA OFS-KI9807 635nm LASER Source Inexpensive handheld power meter for testing and commissioning optical fibre networks. Compact and rugged, fast and accurate, simple to operate, 1200 Hour battery life, no dark current offset needed, test tone measurement. Compatible with Autotest light sources. Kingfisher KI-9600 Power Meter Results cannot be stored onto this units memory. OFS-KI3600-GE-MP Levels from +10 / -75dBm OFS-KI3600-InGaAs-MP Levels from +5 / -70dBm OFS-KI3600-H3B-MP Levels from +27 / -50dBm (InGaAs with Attenuation for High Power) OFS-KI3600-H5-MP Levels from +15 / -60dBm (InGaAs with Attenuation for High Power) OFS-KI3600-Si Levels from +0 / -70dBm (for 635 980nm measurements) Kingfisher KI-7800 Light Source Kingfisher KI-7600 Power Meter Basic shirt pocket size Optical Power Meter suitable for both singlemode and multimode applications. 300 Hour battery life, Displays dbm, db, linear, tone Hz, 0.01 db resolution. A separate reference for each λ can be stored. Supplied with adaptors for SC, FC, ST connectors, soft carry pouch, operation manual on CD. Other connector adaptors are available. 3 Year Warranty and Calibration cycle. OFS-KI9600-InGaAs Levels from +5 / -60dBm OFS-KI9600-H3B Levels from +24 / -40dBm OFS-KI9600-H5 Levels from +15 / -50dBm OFS-KI9600-Ge Levels fom +10 / 60dBm LED & LASER sources for general testing and maintenance, singlemode and multimode applications and for fibre indentification. Features Autotest, easy to use interchangeable connector adaptors, automatic dual wavelength testing, 140 Hour battery life, RS232 computer & printer interface, Rugged construction. OFS-KI7823 850 LED Source & 1310/1550nm LASER OFS-KI7822 1310/1550nm LASER Source OFS-KI7824 850/1300 LED Source & 1310/1550nm LASER 1 Optical Power Meter suitable for both singlemode and multimode applications. Compatible with the 7800 series of light sources for Autotest. Flexible memory with up to 850 memory positions, 250 Hour battery life, RS232 interface, Tone Detector, Log / Linear Readout, 0.01 db resolution, Backlight, Display Hold Feature. OFS-KI7600-InGaAs Levels from +5 / -60dBm OFS-KI7600-H3B Levels from +24 / -40dBm OFS-KI7600-H5 Levels from +15 / -50dBm OFS-KI7600-Ge Levels fom +10 / 60dBm
2 TEST EQUIPMENT ATTENUATORS and LOSS TEST SETS Kingfisher KI-7010B Series Automated Variable Optical Attenuator Kingfisher KI-7300 LTS (One Way) The Kingfisher KI7300 high performance optical Loss Test Set (LTS) combines a true optically stabilised source and optical power meter in one handheld unit. No warm-up is required on this source or meter. New C series with USB interface and new technology InGaAs detector. Real-time one way Autotest loss display at up to 4 wavelengths. Comes with KITS software for data retrieval and reporting. OFS-KI7303C-InGaAs-MP 1310/1550nm, InGaAs Meter OFS-KI73010C-InGaAs-MP 1310/1550/1625nm, InGaAs Meter OFS-KI77016C-InGaAs-MP InGaAs Meter Kingfisher KI-7700 LTS (One Way) This series Loss Test Set (LTS) combines a source and meter in one handheld instrument. A pair of instruments are ideal for measuring cable loss featuring a tone source facility for quick identification and continuity checking. New C series with USB interface and new technology InGaAs detector. Real-time one way Autotest loss display at up to 4 wavelengths. The KI-7010B Automated variable attenuator is used for transmission equipment testing. This attenuator features up to 4 calibrated wavelengths and remote control PC software. The very flat wavelength response allows confident testing of CWDM / DWDM systems. Comes with KITS software for data retrieval and reporting. Range = 2 60 db with 0.05 db resolution. Excellent linearity and absolute accuracy enables precision linearity testing of sub systems and components. PC Software is used to provide external control and is available free. OFS-KI7722-InGaAs-MP 1310/1550nm, InGaAs Meter OFS-KI7704-InGaAs-MP 850/1300nm, InGaAs Meter OFS-KI77013C-InGaAs-MP 1550/1625nm, InGaAs Meter OFS-KI77016C-InGaAs-MP InGaAs Meter Kingfisher KI-7740 Bi-Directional LTS Kingfisher KI-7340 Bi-Directional LTS & ORL The KI 7740 Two-Way LTS (Loss Test Set) is the industry's fastest and easiest to use Two-Way Optical Loss Test Set (OLTS). It shows bidirectional average loss in real time. This cost effective instrument can also be used as a source, meter, and tone generator / detector. The Kingfisher KI7300 high performance optical Loss Test Set (LTS) combines a true optically stabilised source and optical power meter in one handheld unit and optical return loss measurements. No warm-up is required on this source or meter. New C series with USB interface and new technology InGaAs detector. Real-time two way Autotest loss display at up to 4 wavelengths. Backed with a 3-7 year warranty. OFS-KI7013B Singlemode Attenuator, PC OFS-KI7013B-APC Singlemode Attenuator, APC OFS-KI7020B 850/1300nm, Multimode Attenuator, 50/125µm Fibre OFS-KI7021B 850/1300nm, Multimode Attenuator, 62.5/125µm Fibre OFS-KI7742C-InGaAs-MP 1310/1550nm, InGaAs Meter, ORL, 2W OFS-KI77410C-InGaAs-MP-APC 1310/1550/1625nm, InGaAs Meter, ORL, 2W, APC Interface. OFS-KI73416C-InGaAs-MP InGaAs Meter, ORL OFS-KI7343C-InGaAs-MP 1310/1550nm, InGaAs Meter, ORL
TEST EQUIPMENT 3 EXFO RANGE OF OPTICAL TEST GEAR Handheld OTDR Series - AXS-100 Compact OTDR Series - FTB-150 OTDR Modules FTB-7600E (Ultra Long Haul) When distance is an issue, the FTB-7600E OTDR, with a dynamic range of up to 50dB, is the solution. 1310, 1550, 1625nm wavelengths with 50, 50, 48dB dynamic range. EXFO s handheld OTDR series covers the whole range of short haul OTDR test applications. Featuring unrivaled event dead zones and first class dynamic ranges, it includes many models to better suit your OTDR testing requirements. AXS-110-12CD-23B-XX-XX Combining single mode and multimode capabilities for enterprise, campus and access networks, this model offers 850, 1300, 1310 and 1550nm wavelengths, with respective dynamic ranges of 24, 25, 32, and 30dB. AXS-100-003B-XX Single wavelength, single mode OTDR ideal for FTTx/Access and CATV testing, this model offers 1550nm wavelength with a 28dB dynamic range. AXS-100-023B-XX Dual wavelength, single mode OTDR ideal for FTTx/Access and CATV testing, this model offers 1310 and 1550nm wavelengths with a 29 and 28dB dynamic range respectively. FasTrace function: one-touch easy testing for top user friendliness. 8-hour power autonomy. USB Port (memory stick compatible) for easy data transfer. Large internal memory (up to 500 results). Automatic pass/fail anaylysis and macrobend locating. Transreflective colour display for viewing clear results under bright sunlight. The FTB-150 is a fast, powerful, lightweight solution. It can house any of EXFO s singlemode and multimode OTDR configurations designed to test up to four wavelengths. Choose from various combinations featuring the 850, 1300, 1310, 1490, 1550, and 1625nm wavelengths covering all fibre applications from long haul WDM to metro, FTTH and LAN networks. All EXFO OTDR configurations provide a stable light source, as well as the option of adding a visual fault locator (VFL). They feature the industry s shortest dead zones and fastest acquisition, processing and reporting routines, the FTB-150 is designed for top efficiency in the field. Whether you need to carry out tier-2 certification of premises networks, characterize your links during construction or installation, or perform fast, efficient maintenance or troubleshooting testing, the FTB-150 Compact OTDR delivers the performance you re looking for. FTB-150-QUAD This model offers 850, 1300, 1310 and 1550nm wavelengths, with respective dynamic ranges of 27, 26, 36, and 34dB. FTB-150-ACCESS This model offers 1310 and 1550nm wavelengths, with respective dynamic ranges of 37 and 35dB. FTB-150-MM This multimode model offers 850, 1300nm wavelengths, with respective dynamic ranges of 27 and 26dB. FTB-7500E (Metro/Long Haul) When distance is an issue, the FTB-7500E OTDR, with a dynamic range of up to 45dB, is the solution. 1310, 1550, 1625nm wavelengths with 45, 45, 45dB dynamic range. FTB-7400E (Metro/CWDM) When testing CWDM networks with the ITU G.694.2 CWDM grid is an issue, the FTB-7400E OTDR, with a dynamic range of up to 41dB, is the solution. Three modules are available: FTB-7400E-CWS 1310, 1490, 1510, 1530nm wavelengths with 41, 41, 41, 41dB dynamic range. FTB-7400E-CWCL 1550, 1570, 1590, 1610nm wavelengths with 41, 41, 41, 40dB dynamic range. FTB-7400E-XXXX 1310, 1383, 1550, 1625nm wavelengths with 42, 40, 41, 41dB dynamic range. FTB-7200D (LAN/WAN Access) This unit combines single mode and multimode functionalities, ideal for private/premises/enterprise network testing. Three modules are available: FTB-7200D-12CD 850, 1300nm wavelengths with 27, 26dB dynamic range. FTB-7200D-12CD-23B 850, 1300, 1310, 1550nm wavelengths with 27, 26, 36, 34dB dynamic range.
4 TEST EQUIPMENT EXFO RANGE OF OPTICAL TEST GEAR Compact Platform OTDR Series - FTB-200 Platform FTB-500 The result of over 10 years or proven leadership in multimodular test platforms. The FTB-500 offers a whole new spectrum of network testing possibilities, a whole new paradigm: more advanced applications, faster setups, test cycles and reporting, wireless communication and reporting, and universal compatibility with all EXFO FTB modules, past, present and future. Designed for network experts, this high-end, highly evolutive platform enables next generation network testing. Available in either 4-slot or 8-slot configurations with a range of accessories. Fibre Inspection Probe FIP-400 The smaller, lighter platform built for the supertech combines singlemode and multimode fibre test functionalities, ideal for FTTx, metro/access and long haul network testing. Accomodates two field interchangeable modules ranging from OTDR and loss testers to SONET/SDH and Ethernet analysers. It is a known fact that that optical network problems are often caused by dirty and/or damaged connectors. Using a fibre inspection probe to ensure connectors/adaptors are clean and exempt of any defect is where accurate testing starts. Benefit from the best optical resolution in the industry and see scratches and dirt particles as small as 1µm. Can be used in conjunction with the FTB-200 units and others. COMPATIBLE MODULE Families OTDR modules (1 slot). Optical return loss module (1 slot). Ethernet test modules (1 slot). SONET/SDH test modules (1 slot). DSn/PDH test module (1 slot). Typical OTDR screen view
SPLICING EQUIPMENT 5 FITEL FUSION SPLICERS S178 The FITEL S178A Core-Alignment Fusion Splicer is the latest, state-of-the-art addition to the S17x series of splicers. By combining high speed, precision, durability and portability in one unit, the S178A Fusion Splicer ushers in an entirely new range of application for core alignment splicing. Equipped with a new alignment system that can save up to 20% splicing time, the S178 s improved heating mechanism can also reduce protection sleeve shrink time by more than 30%. In addition, a newly incorporated USB2.0 interface speeds PC communication and image/video transfer, while enhancing reliability. Although the S178A Fusion Splicer is significantly smaller and lighter in weight than previous models, its canopy design, durable metal body frame and rubber protection corners provide robust protection, enabling use in demanding environments without compromising splice performance. Along with its rugged durability, the splicer offers a new battery system allowing up to 200 splicing cycles (Splicing/Heating) before additional batteries are needed, and an innovative, mirror-free alignment system makes maintenance work a snap. While the S178A Fusion Splicer is fast and durable, it continues the FITEL tradition of quality and excellence by delivering precise, accurate splices even under rigorous conditions in the field. The S178A Fusion Splicer is your best choice for wide range of uses including FTTx, LAN, Backbone, Eneterprise, Long-Haul installations. It is also an excellent option for use in the conventional telecommunications industry. Key Features DROP TEST RAIN TEST Rugged and Compact design to endure harsh environment conditions. Fast splice (7 sec) at super low loss and Fast Heating (25 sec). Easy electrode replacement, mirror free alignment system. Easy software upgrade via the internet. Easily exchanged fibre holder systems. Auto-start shrink sleeve oven feature. Improved GUI to further enhance ease-of-use. RoHS compliant. Drop resistant, Water resistant, Dust resistant. STANDARD PACKAGE CONTENTS Standard package (pictured) consists of S178A Main Body, Hard Carrying Case, Battery Pack, Battery Charger, Spare Electrodes, AC Adaptor for S178A, AC Adaptor for Battery Charger, AC Cable Cord, Electrode sharpener, Cleaning Brush and User Manual. Optional components include a Soft Carrying Case, Cooling Tray, Angled Stand, Working Belt, USB Cable, Car Cigarette Cable, Tight Holders (16 or 10mm), Fibre Holders for 160, 250, 500, 900µm coating diameters, Splice On Connector (SOC) Holders.
6 SPLICING EQUIPMENT FUSION SPLICER / CLEAVER SERVICE FACILITIES Optical Fibre Systems have trained staff for the servicing of fusion splicers and cleavers that we sell. We can service these machines locally here in our office in Brisbane with good availability of parts.
NBN Equipment 7 Handheld OTDR Series - AXS-100 EXFO s handheld OTDR series covers the whole range of short haul OTDR test applications. Featuring unrivaled event dead zones and first class dynamic ranges, it includes many models to better suit your OTDR testing requirements. AXS-110-12CD-23B-XX-XX Combining single mode and multimode capabilities for enterprise, campus and access networks, this model offers 850, 1300, 1310 and 1550nm wavelengths, with respective dynamic ranges of 24, 25, 32, and 30dB. AXS-100-003B-XX Single wavelength, single mode OTDR ideal for FTTx/Access and CATV testing, this model offers 1550nm wavelength with a 28dB dynamic range. Compact OTDR Series - FTB-150 The FTB-150 is a fast, powerful, lightweight solution. It can house any of EXFO s singlemode and multimode OTDR configurations designed to test up to four wavelengths. Choose from various combinations featuring the 850, 1300, 1310, 1490, 1550, and 1625nm wavelengths covering all fibre applications from long haul WDM to metro, FTTH and LAN networks. All EXFO OTDR configurations provide a stable light source, as well as the option of adding a visual fault locator (VFL). They feature the industry s shortest dead zones and fastest acquisition, processing and reporting routines, the FTB-150 is designed for top efficiency in the field. Whether you need to carry out tier-2 certification of premises networks, characterize your links during construction or installation, or perform fast, efficient maintenance or troubleshooting testing, the FTB-150 Compact OTDR delivers the performance you re looking for. FTB-150-QUAD This model offers 850, 1300, 1310 and 1550nm wavelengths, with respective dynamic ranges of 27, 26, 36, and 34dB. FTB-150-ACCESS This model offers 1310 and 1550nm wavelengths, with respective dynamic ranges of 37 and 35dB. FTB-150-MM This multimode model offers 850, 1300nm wavelengths, with respective dynamic ranges of 27 and 26dB. OTDR Modules FTB-7600E (Ultra Long Haul) When distance is an issue, the FTB-7600E OTDR, with a dynamic range of up to 50dB, is the solution. 1310, 1550, 1625nm wavelengths with 50, 50, 48dB dynamic range. FTB-7500E (Metro/Long Haul) When distance is an issue, the FTB-7500E OTDR, with a dynamic range of up to 45dB, is the solution. 1310, 1550, 1625nm wavelengths with 45, 45, 45dB dynamic range. FTB-7400E (Metro/CWDM) When testing CWDM networks with the ITU G.694.2 CWDM grid is an issue, the FTB-7400E OTDR, with a dynamic range of up to 41dB, is the solution. Three modules are available: FTB-7400E-CWS 1310, 1490, 1510, 1530nm wavelengths with 41, 41, 41, 41dB dynamic range. FTB-7400E-CWCL 1550, 1570, 1590, 1610nm wavelengths with 41, 41, 41, 40dB dynamic range. FTB-7400E-XXXX 1310, 1383, 1550, 1625nm wavelengths with 42, 40, 41, 41dB dynamic range. AXS-100-023B-XX Dual wavelength, single mode OTDR ideal for FTTx/Access and CATV testing, this model offers 1310 and 1550nm wavelengths with a 29 and 28dB dynamic range respectively. FasTrace function: one-touch easy testing for top user friendliness. 8-hour power autonomy. USB Port (memory stick compatible) for easy data transfer. Large internal memory (up to 500 results). Automatic pass/fail anaylysis and macrobend locating. Transreflective colour display for viewing clear results under bright sunlight. FTB-7200D (LAN/WAN Access) This unit combines single mode and multimode functionalities, ideal for private/premises/enterprise network testing. Three modules are available: FTB-7200D-12CD 850, 1300nm wavelengths with 27, 26dB dynamic range. FTB-7200D-12CD-23B 850, 1300, 1310, 1550nm wavelengths with 27, 26, 36, 34dB dynamic range.
8 NBN Equipment EXFO RANGE OF OPTICAL TEST GEAR Platform FTB-500 The result of over 10 years or proven leadership in multimodular test platforms. The FTB-500 offers a whole new spectrum of network testing possibilities, a whole new paradigm: more advanced applications, faster setups, test cycles and reporting, wireless communication and reporting, and universal compatibility with all EXFO FTB modules, past, present and future. Designed for network experts, this high-end, highly evolutive platform enables next generation network testing. Available in either 4-slot or 8-slot configurations with a range of accessories. Fibre Inspection Probe FIP-400 It is a known fact that that optical network problems are often caused by dirty and/or damaged connectors. Using a fibre inspection probe to ensure connectors/adaptors are clean and exempt of any defect is where accurate testing starts. Benefit from the best optical resolution in the industry and see scratches and dirt particles as small as 1µm. Can be used in conjunction with the FTB-200 units and others. Typical OTDR screen view