IRUITPRO Self Test Technology 1st introduced by ryant over 10 years ago! self test monitoring now required in 2015 UL 943 GFI Safety Tamper- Resistant Hospital Grade ombo Switch/GFI udible ryant Self Test GFI Patented Technology ryant IRUITPRO GFI receptacles continually test and monitor for people protection capability automatically. This patented safety feature includes disconnecting power to the receptacle if critical components are damaged and GFI protection is lost. GFI auto-monitoring is conducted continuously within every 30 seconds. lso, clear visual indicators are provided on the device face representing power status, trip condition, ground fault condition and end of life status. In addition, for added safety, power will be denied to the receptacle face if reverse wiring of line and load was to occur. IRUITPRO Self Test ommon Questions and nswers ryant Self Test Patented Technology UL (Underwriters Laboratory) now requires all manufacturers to provide self test monitoring capability effective June 29, 2015. When was the last time you tested a GFI receptacle? Industry studies indicate only a very small number of installations are actually being tested as is recommended by the manufacturer and UL. This is the fundamental reason this new revision has been incorporated into UL 943 standard for 2015. ach Ground Fault Receptacle must automatically monitor GFI functionality periodically If the unit can no longer provide Reverse line and load miswire GFI protection, it must comply function (repeated) with the following utomatically test within (5) seconds of power to line and load terminals; periodically means every (3) hours or less. eny Power (trip with the inability to reset); if unit does reset it is subject to the next automonitoring test cycle. Visual and/or audible indication that it no longer can provide protection. IRUITPRO Self Test If the line conductor is wired to the load terminal, power to the receptacle face will be denied. This includes both the initial installation and any subsequent reinstallations. Q: Why are ground fault receptacles changing? : Underwriters Laboratory per revised 943 has published new self test monitoring requirements that apply to all permanently installed GFI products, effective June 29, 2015. Q: What is the primary benefit from these changes? : very Ground Fault Receptacle must now test itself for the ability to provide GFI protection. Industry studies show installed ground fault receptacles are not being tested as required by the end user (minimum monthly). Q: an I continue to use current generation GFI receptacles after June 28th? : bsolutely, the current ryant GFI receptacles can no longer be produced after June 28, 2015. However, these devices produced prior to June 28, 2015 can be sold by manufacturers and distributors until their inventories are depleted. There is no time limitation on use of this product. Q: What is different about this new version? : power denial feature has been added to this next generation of self test Ground Fault Receptacle product. If critical components are damaged and GFI, power to the receptacle will be disconnected. Q: What types of indicators do the IRUITPRO ground fault receptacles have? : very Ground Fault Receptacle includes a solid green L to indicate power to the face, a solid red L for a tripped condition and a flashing red L to indicate end of life when the unit should be replaced. Q: How does the version function? : The Ground Fault Receptacle includes all L indicators that are in the standard product. In addition, an audible alarm will sound when either the unit trips and/or is in end of life. silencing feature is provided on the face of the device to turn off as needed. Patented IRUITPRO Technology ontinuous Self Test functionality and disconnects power to receptacle if critical components are damaged and GFI Federal ommunications ommission Part 15 ompliant for The Ground Fault Performance radiated and conducted emissions Other GFI Products vailable Thermoplastic Nylon Housing High Impact and Ultraviolet Resistant construction provides resilience in harsh environments and Safety hoice lear Visual Indication of Ground Fault Receptacle Status L Indicating Lights: Green L (power to the device) Red L (trip condition/ground fault condition) Flashing Red L (end of life) Internal ack Wiring lamp and Guide Pocket Quick and dependable termination Protection gainst Line and Load Reversal No power to the face or downstream receptacles if device is miswired Temporary Power istribution oxes Installation ase, Lower Labor ost With auto-grounding clip, captive mounting screws and single tab breakoff ears and full breakoff for OM raised covers Portable Plug Line ords Option Light sensor controls for automatic "ON/OFF" and custom dual lens for optimum light output ryant lectric Hubbell Incorporated (elaware) 40 Waterview rive Shelton, T 06484 Phone (800) 323-2792 FX (800) 543-0538 Printed in U.S.. Specifications subject to change without notice. is a registered trademarks of Hubbell Incorporated. LG002 6/15
IRUITPRO Self Test Technology 1st introduced by ryant over 10 years ago! self test monitoring now required in 2015 UL 943 GFI Safety Tamper- Resistant Hospital Grade ombo Switch/GFI udible ryant Self Test GFI Patented Technology ryant IRUITPRO GFI receptacles continually test and monitor for people protection capability automatically. This patented safety feature includes disconnecting power to the receptacle if critical components are damaged and GFI protection is lost. GFI auto-monitoring is conducted continuously within every 30 seconds. lso, clear visual indicators are provided on the device face representing power status, trip condition, ground fault condition and end of life status. In addition, for added safety, power will be denied to the receptacle face if reverse wiring of line and load was to occur. IRUITPRO Self Test ommon Questions and nswers ryant Self Test Patented Technology UL (Underwriters Laboratory) now requires all manufacturers to provide self test monitoring capability effective June 29, 2015. When was the last time you tested a GFI receptacle? Industry studies indicate only a very small number of installations are actually being tested as is recommended by the manufacturer and UL. This is the fundamental reason this new revision has been incorporated into UL 943 standard for 2015. ach Ground Fault Receptacle must automatically monitor GFI functionality periodically If the unit can no longer provide Reverse line and load miswire GFI protection, it must comply function (repeated) with the following utomatically test within (5) seconds of power to line and load terminals; periodically means every (3) hours or less. eny Power (trip with the inability to reset); if unit does reset it is subject to the next automonitoring test cycle. Visual and/or audible indication that it no longer can provide protection. IRUITPRO Self Test If the line conductor is wired to the load terminal, power to the receptacle face will be denied. This includes both the initial installation and any subsequent reinstallations. Q: Why are ground fault receptacles changing? : Underwriters Laboratory per revised 943 has published new self test monitoring requirements that apply to all permanently installed GFI products, effective June 29, 2015. Q: What is the primary benefit from these changes? : very Ground Fault Receptacle must now test itself for the ability to provide GFI protection. Industry studies show installed ground fault receptacles are not being tested as required by the end user (minimum monthly). Q: an I continue to use current generation GFI receptacles after June 28th? : bsolutely, the current ryant GFI receptacles can no longer be produced after June 28, 2015. However, these devices produced prior to June 28, 2015 can be sold by manufacturers and distributors until their inventories are depleted. There is no time limitation on use of this product. Q: What is different about this new version? : power denial feature has been added to this next generation of self test Ground Fault Receptacle product. If critical components are damaged and GFI, power to the receptacle will be disconnected. Q: What types of indicators do the IRUITPRO ground fault receptacles have? : very Ground Fault Receptacle includes a solid green L to indicate power to the face, a solid red L for a tripped condition and a flashing red L to indicate end of life when the unit should be replaced. Q: How does the version function? : The Ground Fault Receptacle includes all L indicators that are in the standard product. In addition, an audible alarm will sound when either the unit trips and/or is in end of life. silencing feature is provided on the face of the device to turn off as needed. Patented IRUITPRO Technology ontinuous Self Test functionality and disconnects power to receptacle if critical components are damaged and GFI Federal ommunications ommission Part 15 ompliant for The Ground Fault Performance radiated and conducted emissions Other GFI Products vailable Thermoplastic Nylon Housing High Impact and Ultraviolet Resistant construction provides resilience in harsh environments and Safety hoice lear Visual Indication of Ground Fault Receptacle Status L Indicating Lights: Green L (power to the device) Red L (trip condition/ground fault condition) Flashing Red L (end of life) Internal ack Wiring lamp and Guide Pocket Quick and dependable termination Protection gainst Line and Load Reversal No power to the face or downstream receptacles if device is miswired Temporary Power istribution oxes Installation ase, Lower Labor ost With auto-grounding clip, captive mounting screws and single tab breakoff ears and full breakoff for OM raised covers Portable Plug Line ords Option Light sensor controls for automatic "ON/OFF" and custom dual lens for optimum light output ryant lectric Hubbell Incorporated (elaware) 40 Waterview rive Shelton, T 06484 Phone (800) 323-2792 FX (800) 543-0538 Printed in U.S.. Specifications subject to change without notice. is a registered trademarks of Hubbell Incorporated. LG002 6/15
IRUITPRO Self Test Technology IRUITPRO Self Test Technology ommercial GFI Receptacles IRUITPRO Self Test Technology ommercial, and Only GFI Receptacles Patented shutter design for tamper-resistant Patented IRUITPRO self test technology Patented shutter design for tamper- protection if critical components are damaged and GFI ompliant with N 406.12 and N 517-18(c) Patented IRUITPRO self test technology resistant protection Meets N requirements for TR (517-18c) and WR (406.9), UV and corrosion resistance for harsh and damp applications Internal back wiring clamp and guide for quick if critical components are damaged and GFI and secure termination Night light option includes light sensor controls trip condition technology Protects against line and load reversal, Fed. Spec UL Listed (Hospital Grade) Meets N requirements for weather resistance no power to the face or downstream if device is miswired (406.9), UV and corrosion resistance for harsh and damp applications ( Only) TR GFTRST15I GFTRST15L GFTRST15W GFTRST15* GFTRST15INL GFTRST15LNL GFTRST15WNL GFTRST15*NL GFTRST15IZ GFTRST15LZ GFTRST15WZ GFTRST15*Z GFTRST20I GFTRST20L GFTRST20W GFTRST20* GFTRST20INL GFTRST20LNL GFTRST20WNL GFTRST20*NL GFTRST20IZ GFTRST20LZ GFTRST20WZ GFTRST20*Z Two L s GFST82ITRNL GFST82LTRNL GFST82WTRNL GFST82*TRNL GFST82ITRZ GFST82LTRZ GFST82WTRZ GFST82*TRZ GFST83ITRNL GFST83LTRNL GFST83WTRNL GFST83*TRNL GFST83ITRZ GFST83LTRZ GFST83WTRZ GFST83*TRZ 15 120V Switch Two L s ombination Switch GFSPST15I GFSPST15L GFSPST15W lmond (L), lack (K), rown (No Suffix), Gray (GY) and Red (R). GFTRST15I3 GFTRST15L3 GFTRST15W3 GFTRST20I3 GFTRST20L3 GFTRST20W3 lank Face Two L s vailable in 20 Only GFRST15I GFRST15L GFRST15W GFRST15* GFRST15INL GFRST15LNL GFRST15WNL GFRST15*NL GFRST15IZ GFRST15LZ GFRST15WZ GFRST15*Z GFRST20I GFRST20L GFRST20W GFRST20* GFRST20INL GFRST20LNL GFRST20WNL GFRST20*NL GFRST20IZ GFRST20LZ GFRST20WZ GFRST20*Z Two L s GFFST20I GFFST20L GFFST20W GFFST20* GFST82I GFST82L GFST82W GFST82* GFST82INL GFST82LNL GFST82WNL GFST82*NL GFST82IZ GFST82LZ GFST82WZ GFST82*Z GFST83I GFST83L GFST83W GFST83* GFST83INL GFST83LNL GFST83WNL GFST83*NL GFST83IZ GFST83LZ GFST83WZ GFST83*Z lmond (L), lack (K), rown (No Suffix), Gray (GY) and Red (R). NOT: onsult factory for made to order ssembled in US product. WR Weather Resistant Only Three evices per Pack GFRST15I3 GFRST15L3 GFRST15W3 GFWRST15I GFWRST15L GFWRST15W GFWRST15* GFRST20I3 GFRST20L3 GFRST20W3 GFWRST20I GFWRST20L GFWRST20W GFWRST20* TR WR GFTWRST15I GFTWRST15L GFTWRST15W GFTWRST15* GFTWRST15IIG GFTWRST15LIG GFTWRST15WIG GFTWRST15*IG GFTWRST20I GFTWRST20L GFTWRST20W GFTWRST20* GFTWRST20IIG GFTWRST20LIG GFTWRST20WIG GFTWRST20*IG GFST82ITR GFST82LTR GFST82WTR GFST82*TR GFST82IIG GFST82LIG GFST82WIG GFST82*IG GFST83ITR GFST83LTR GFST83WTR GFST83*TR GFST83IIG GFST83LIG GFST83WIG GFST83*IG *Other colors include the following. To order, please replace * with the color code in parentheses. lmond (L), lack (K), rown (No Suffix), Gray (GY) and Red (R). NOT: onsult factory for made to order ssembled in US product. Performance ertifications UL File # 41978 s Underwriters Laboratories 943 lass GFI 2015 & UL 498 Receptacles S File # LR24886 anadian s ssociation 22.2 Number 42 Industry s NM W 6, NSI -73, NOM, N & F Part 15 ertified conformance to radiated lass and conducted emission testing per F lectrical Performance Specifications Trip Level Trip Time Frequency Voltage mperage ielectric voltage withstand Horsepower urrent Interrupting Green L Indicator Patented IRUITPRO self test for automatic on and off, custom dual lens for optimum light output version provides audible notification of a ommercial and GFI Receptacles 4 6 m.025 sec 60 Hz 120V +10% - 15% 15/20, 20 feed thru 1500V minimum per UL 498 10,000 amps On when power is available to the device Red Trip Indicator On when device is in the tripped position Red OL Indicator Rapid flash when unit has reached end of life and/or cannot provide GFI protection Mechanical Terminal 14 10 WG ccommodations Product s are a permanent part of Identification the device nvironmental Flammability UL94 V2 Operating - 35 to +66 (- 30 to + 150 F) Temperature Maximum Humidity 95% Product imensions Inches (mm) GFI Receptacle 3.27 (83.1) 2.75 (69.8) 1.75 (44.5) 1.47 (37.4) 1.10 (27.9)
IRUITPRO Self Test Technology IRUITPRO Self Test Technology ommercial GFI Receptacles IRUITPRO Self Test Technology ommercial, and Only GFI Receptacles Patented shutter design for tamper-resistant Patented IRUITPRO self test technology Patented shutter design for tamper- protection if critical components are damaged and GFI ompliant with N 406.12 and N 517-18(c) Patented IRUITPRO self test technology resistant protection Meets N requirements for TR (517-18c) and WR (406.9), UV and corrosion resistance for harsh and damp applications Internal back wiring clamp and guide for quick if critical components are damaged and GFI and secure termination Night light option includes light sensor controls trip condition technology Protects against line and load reversal, Fed. Spec UL Listed (Hospital Grade) Meets N requirements for weather resistance no power to the face or downstream if device is miswired (406.9), UV and corrosion resistance for harsh and damp applications ( Only) TR GFTRST15I GFTRST15L GFTRST15W GFTRST15* GFTRST15INL GFTRST15LNL GFTRST15WNL GFTRST15*NL GFTRST15IZ GFTRST15LZ GFTRST15WZ GFTRST15*Z GFTRST20I GFTRST20L GFTRST20W GFTRST20* GFTRST20INL GFTRST20LNL GFTRST20WNL GFTRST20*NL GFTRST20IZ GFTRST20LZ GFTRST20WZ GFTRST20*Z Two L s GFST82ITRNL GFST82LTRNL GFST82WTRNL GFST82*TRNL GFST82ITRZ GFST82LTRZ GFST82WTRZ GFST82*TRZ GFST83ITRNL GFST83LTRNL GFST83WTRNL GFST83*TRNL GFST83ITRZ GFST83LTRZ GFST83WTRZ GFST83*TRZ 15 120V Switch Two L s ombination Switch GFSPST15I GFSPST15L GFSPST15W lmond (L), lack (K), rown (No Suffix), Gray (GY) and Red (R). GFTRST15I3 GFTRST15L3 GFTRST15W3 GFTRST20I3 GFTRST20L3 GFTRST20W3 lank Face Two L s vailable in 20 Only GFRST15I GFRST15L GFRST15W GFRST15* GFRST15INL GFRST15LNL GFRST15WNL GFRST15*NL GFRST15IZ GFRST15LZ GFRST15WZ GFRST15*Z GFRST20I GFRST20L GFRST20W GFRST20* GFRST20INL GFRST20LNL GFRST20WNL GFRST20*NL GFRST20IZ GFRST20LZ GFRST20WZ GFRST20*Z Two L s GFFST20I GFFST20L GFFST20W GFFST20* GFST82I GFST82L GFST82W GFST82* GFST82INL GFST82LNL GFST82WNL GFST82*NL GFST82IZ GFST82LZ GFST82WZ GFST82*Z GFST83I GFST83L GFST83W GFST83* GFST83INL GFST83LNL GFST83WNL GFST83*NL GFST83IZ GFST83LZ GFST83WZ GFST83*Z lmond (L), lack (K), rown (No Suffix), Gray (GY) and Red (R). NOT: onsult factory for made to order ssembled in US product. WR Weather Resistant Only Three evices per Pack GFRST15I3 GFRST15L3 GFRST15W3 GFWRST15I GFWRST15L GFWRST15W GFWRST15* GFRST20I3 GFRST20L3 GFRST20W3 GFWRST20I GFWRST20L GFWRST20W GFWRST20* TR WR GFTWRST15I GFTWRST15L GFTWRST15W GFTWRST15* GFTWRST15IIG GFTWRST15LIG GFTWRST15WIG GFTWRST15*IG GFTWRST20I GFTWRST20L GFTWRST20W GFTWRST20* GFTWRST20IIG GFTWRST20LIG GFTWRST20WIG GFTWRST20*IG GFST82ITR GFST82LTR GFST82WTR GFST82*TR GFST82IIG GFST82LIG GFST82WIG GFST82*IG GFST83ITR GFST83LTR GFST83WTR GFST83*TR GFST83IIG GFST83LIG GFST83WIG GFST83*IG *Other colors include the following. To order, please replace * with the color code in parentheses. lmond (L), lack (K), rown (No Suffix), Gray (GY) and Red (R). NOT: onsult factory for made to order ssembled in US product. Performance ertifications UL File # 41978 s Underwriters Laboratories 943 lass GFI 2015 & UL 498 Receptacles S File # LR24886 anadian s ssociation 22.2 Number 42 Industry s NM W 6, NSI -73, NOM, N & F Part 15 ertified conformance to radiated lass and conducted emission testing per F lectrical Performance Specifications Trip Level Trip Time Frequency Voltage mperage ielectric voltage withstand Horsepower urrent Interrupting Green L Indicator Patented IRUITPRO self test for automatic on and off, custom dual lens for optimum light output version provides audible notification of a ommercial and GFI Receptacles 4 6 m.025 sec 60 Hz 120V +10% - 15% 15/20, 20 feed thru 1500V minimum per UL 498 10,000 amps On when power is available to the device Red Trip Indicator On when device is in the tripped position Red OL Indicator Rapid flash when unit has reached end of life and/or cannot provide GFI protection Mechanical Terminal 14 10 WG ccommodations Product s are a permanent part of Identification the device nvironmental Flammability UL94 V2 Operating - 35 to +66 (- 30 to + 150 F) Temperature Maximum Humidity 95% Product imensions Inches (mm) GFI Receptacle 3.27 (83.1) 2.75 (69.8) 1.75 (44.5) 1.47 (37.4) 1.10 (27.9)
IRUITPRO Self Test Technology IRUITPRO Self Test Technology ommercial GFI Receptacles IRUITPRO Self Test Technology ommercial, and Only GFI Receptacles Patented shutter design for tamper-resistant Patented IRUITPRO self test technology Patented shutter design for tamper- protection if critical components are damaged and GFI ompliant with N 406.12 and N 517-18(c) Patented IRUITPRO self test technology resistant protection Meets N requirements for TR (517-18c) and WR (406.9), UV and corrosion resistance for harsh and damp applications Internal back wiring clamp and guide for quick if critical components are damaged and GFI and secure termination Night light option includes light sensor controls trip condition technology Protects against line and load reversal, Fed. Spec UL Listed (Hospital Grade) Meets N requirements for weather resistance no power to the face or downstream if device is miswired (406.9), UV and corrosion resistance for harsh and damp applications ( Only) TR GFTRST15I GFTRST15L GFTRST15W GFTRST15* GFTRST15INL GFTRST15LNL GFTRST15WNL GFTRST15*NL GFTRST15IZ GFTRST15LZ GFTRST15WZ GFTRST15*Z GFTRST20I GFTRST20L GFTRST20W GFTRST20* GFTRST20INL GFTRST20LNL GFTRST20WNL GFTRST20*NL GFTRST20IZ GFTRST20LZ GFTRST20WZ GFTRST20*Z Two L s GFST82ITRNL GFST82LTRNL GFST82WTRNL GFST82*TRNL GFST82ITRZ GFST82LTRZ GFST82WTRZ GFST82*TRZ GFST83ITRNL GFST83LTRNL GFST83WTRNL GFST83*TRNL GFST83ITRZ GFST83LTRZ GFST83WTRZ GFST83*TRZ 15 120V Switch Two L s ombination Switch GFSPST15I GFSPST15L GFSPST15W lmond (L), lack (K), rown (No Suffix), Gray (GY) and Red (R). GFTRST15I3 GFTRST15L3 GFTRST15W3 GFTRST20I3 GFTRST20L3 GFTRST20W3 lank Face Two L s vailable in 20 Only GFRST15I GFRST15L GFRST15W GFRST15* GFRST15INL GFRST15LNL GFRST15WNL GFRST15*NL GFRST15IZ GFRST15LZ GFRST15WZ GFRST15*Z GFRST20I GFRST20L GFRST20W GFRST20* GFRST20INL GFRST20LNL GFRST20WNL GFRST20*NL GFRST20IZ GFRST20LZ GFRST20WZ GFRST20*Z Two L s GFFST20I GFFST20L GFFST20W GFFST20* GFST82I GFST82L GFST82W GFST82* GFST82INL GFST82LNL GFST82WNL GFST82*NL GFST82IZ GFST82LZ GFST82WZ GFST82*Z GFST83I GFST83L GFST83W GFST83* GFST83INL GFST83LNL GFST83WNL GFST83*NL GFST83IZ GFST83LZ GFST83WZ GFST83*Z lmond (L), lack (K), rown (No Suffix), Gray (GY) and Red (R). NOT: onsult factory for made to order ssembled in US product. WR Weather Resistant Only Three evices per Pack GFRST15I3 GFRST15L3 GFRST15W3 GFWRST15I GFWRST15L GFWRST15W GFWRST15* GFRST20I3 GFRST20L3 GFRST20W3 GFWRST20I GFWRST20L GFWRST20W GFWRST20* TR WR GFTWRST15I GFTWRST15L GFTWRST15W GFTWRST15* GFTWRST15IIG GFTWRST15LIG GFTWRST15WIG GFTWRST15*IG GFTWRST20I GFTWRST20L GFTWRST20W GFTWRST20* GFTWRST20IIG GFTWRST20LIG GFTWRST20WIG GFTWRST20*IG GFST82ITR GFST82LTR GFST82WTR GFST82*TR GFST82IIG GFST82LIG GFST82WIG GFST82*IG GFST83ITR GFST83LTR GFST83WTR GFST83*TR GFST83IIG GFST83LIG GFST83WIG GFST83*IG *Other colors include the following. To order, please replace * with the color code in parentheses. lmond (L), lack (K), rown (No Suffix), Gray (GY) and Red (R). NOT: onsult factory for made to order ssembled in US product. Performance ertifications UL File # 41978 s Underwriters Laboratories 943 lass GFI 2015 & UL 498 Receptacles S File # LR24886 anadian s ssociation 22.2 Number 42 Industry s NM W 6, NSI -73, NOM, N & F Part 15 ertified conformance to radiated lass and conducted emission testing per F lectrical Performance Specifications Trip Level Trip Time Frequency Voltage mperage ielectric voltage withstand Horsepower urrent Interrupting Green L Indicator Patented IRUITPRO self test for automatic on and off, custom dual lens for optimum light output version provides audible notification of a ommercial and GFI Receptacles 4 6 m.025 sec 60 Hz 120V +10% - 15% 15/20, 20 feed thru 1500V minimum per UL 498 10,000 amps On when power is available to the device Red Trip Indicator On when device is in the tripped position Red OL Indicator Rapid flash when unit has reached end of life and/or cannot provide GFI protection Mechanical Terminal 14 10 WG ccommodations Product s are a permanent part of Identification the device nvironmental Flammability UL94 V2 Operating - 35 to +66 (- 30 to + 150 F) Temperature Maximum Humidity 95% Product imensions Inches (mm) GFI Receptacle 3.27 (83.1) 2.75 (69.8) 1.75 (44.5) 1.47 (37.4) 1.10 (27.9)
IRUITPRO Self Test Technology 1st introduced by ryant over 10 years ago! self test monitoring now required in 2015 UL 943 GFI Safety Tamper- Resistant Hospital Grade ombo Switch/GFI udible ryant Self Test GFI Patented Technology ryant IRUITPRO GFI receptacles continually test and monitor for people protection capability automatically. This patented safety feature includes disconnecting power to the receptacle if critical components are damaged and GFI protection is lost. GFI auto-monitoring is conducted continuously within every 30 seconds. lso, clear visual indicators are provided on the device face representing power status, trip condition, ground fault condition and end of life status. In addition, for added safety, power will be denied to the receptacle face if reverse wiring of line and load was to occur. IRUITPRO Self Test ommon Questions and nswers ryant Self Test Patented Technology UL (Underwriters Laboratory) now requires all manufacturers to provide self test monitoring capability effective June 29, 2015. When was the last time you tested a GFI receptacle? Industry studies indicate only a very small number of installations are actually being tested as is recommended by the manufacturer and UL. This is the fundamental reason this new revision has been incorporated into UL 943 standard for 2015. ach Ground Fault Receptacle must automatically monitor GFI functionality periodically If the unit can no longer provide Reverse line and load miswire GFI protection, it must comply function (repeated) with the following utomatically test within (5) seconds of power to line and load terminals; periodically means every (3) hours or less. eny Power (trip with the inability to reset); if unit does reset it is subject to the next automonitoring test cycle. Visual and/or audible indication that it no longer can provide protection. IRUITPRO Self Test If the line conductor is wired to the load terminal, power to the receptacle face will be denied. This includes both the initial installation and any subsequent reinstallations. Q: Why are ground fault receptacles changing? : Underwriters Laboratory per revised 943 has published new self test monitoring requirements that apply to all permanently installed GFI products, effective June 29, 2015. Q: What is the primary benefit from these changes? : very Ground Fault Receptacle must now test itself for the ability to provide GFI protection. Industry studies show installed ground fault receptacles are not being tested as required by the end user (minimum monthly). Q: an I continue to use current generation GFI receptacles after June 28th? : bsolutely, the current ryant GFI receptacles can no longer be produced after June 28, 2015. However, these devices produced prior to June 28, 2015 can be sold by manufacturers and distributors until their inventories are depleted. There is no time limitation on use of this product. Q: What is different about this new version? : power denial feature has been added to this next generation of self test Ground Fault Receptacle product. If critical components are damaged and GFI, power to the receptacle will be disconnected. Q: What types of indicators do the IRUITPRO ground fault receptacles have? : very Ground Fault Receptacle includes a solid green L to indicate power to the face, a solid red L for a tripped condition and a flashing red L to indicate end of life when the unit should be replaced. Q: How does the version function? : The Ground Fault Receptacle includes all L indicators that are in the standard product. In addition, an audible alarm will sound when either the unit trips and/or is in end of life. silencing feature is provided on the face of the device to turn off as needed. Patented IRUITPRO Technology ontinuous Self Test functionality and disconnects power to receptacle if critical components are damaged and GFI Federal ommunications ommission Part 15 ompliant for The Ground Fault Performance radiated and conducted emissions Other GFI Products vailable Thermoplastic Nylon Housing High Impact and Ultraviolet Resistant construction provides resilience in harsh environments and Safety hoice lear Visual Indication of Ground Fault Receptacle Status L Indicating Lights: Green L (power to the device) Red L (trip condition/ground fault condition) Flashing Red L (end of life) Internal ack Wiring lamp and Guide Pocket Quick and dependable termination Protection gainst Line and Load Reversal No power to the face or downstream receptacles if device is miswired Temporary Power istribution oxes Installation ase, Lower Labor ost With auto-grounding clip, captive mounting screws and single tab breakoff ears and full breakoff for OM raised covers Portable Plug Line ords Option Light sensor controls for automatic "ON/OFF" and custom dual lens for optimum light output ryant lectric Hubbell Incorporated (elaware) 40 Waterview rive Shelton, T 06484 Phone (800) 323-2792 FX (800) 543-0538 Printed in U.S.. Specifications subject to change without notice. is a registered trademarks of Hubbell Incorporated. LG002 6/15