http://ec.europa.eu/enterprise/newapproach/nando/index.cfm?fuseaction=notifiedbody.notifiedbody&refe_cd= EPOS_43373&version_no=20&lst_version_no=20,9,8,7,6,5,4,3,2,,0,9,8,7,6,5,4,3,2,&max_ver sion=20&history_flg=y Notification Zakres notyfikacji UE dla IMQ Found : 4 : IMQ ISTITUTO ITALIANO DEL MARCHIO DI QUALITÀ S.P.A. Via Quintiliano, 43 2038 - MILANO Country : Italy Phone : +39 02 5073 Fax : +39 02 5099500 Email : info@imq.it Website : www.imq.it Notified number : 005 Version(s): 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 Last update : 27/07/2009 s 88/378/EEC Safety of toys expiry/withdrawal date HTML PDF 89/06/EEC Construction products /05/204 HTML PDF 89/686/EEC Personal protective equipment 92/42/EEC Hot-water boilers HTML PDF HTML PDF 93/42/EEC Medical devices 0/03/202 HTML PDF 94/9/EC Equipment and protective systems intended for use in potentially explosive atmospheres 02/04/204 HTML PDF 95/6/EC Lifts 07/08/20 HTML PDF 97/23/EC Pressure equipment 2/03/202 HTML PDF 98/37/EC Machinery 29/2/2009 HTML PDF 99/5/EC Radio and telecommunications terminal equipment 06/04/200 HTML PDF 2004/08/EC - Electromagnetic compatibility 3/2/2009 HTML PDF 2004/22/EC Measuring Instruments HTML PDF 2006/95/EC (ex-73/23/eec) Low voltage directive 26/06/204 HTML PDF 2009/42/EC (ex-90/396/eec) Appliances burning gaseous fuels HTML PDF
88/378/EEC Safety of toys Last update : Unknown (Notifications pre-dating 2006 are not available in these lists) s Procedures Articles/annexes Toys referred to in article EC type-examination Art. 0 89/06/EEC Construction products Last update : 20/07/2009 Version(s): 2 3 4 5 6 7 8 9 0 Decision family, product /Intended use 95/467/EC Chimneys, flues and specific products (/) : Prefabricated chimneys (storey height elements), flue liners (elements or blocks), multi-shell chimney (elements or blocks), single walled chimneys and attached chimneys (chimneys) suppression products (/) : Fire alarm systems-kits (fire safety) suppression products (/) : Power supplies (fire control components) (fire safety) suppression products (/) : AoC system 2+ Technical specification EN 2446:2003 EN 3063-:2005+A:2007 EN 3063-2:2005+A:2007 EN 3069:2005 EN 3084-5:2005 EN 3084-5:2005/AC:2006 EN 3084-7:2005 EN 3084-7:2005/AC:2009 EN 447:2005 EN 457:999/A:2002 EN 457:999/A:2002/AC:2007 EN 457:999/AC:2006 EN 4989-:2007 EN 856-:2003 EN 856-:2003/A:2006 EN 856-:2009 EN 856-2:2004 EN 856-2:2009 EN 857:2003+A:2008 EN 858:2003 EN 858:2008 EN 54-2:2006 EN 20-0:2005 EN 20-0:2005/AC:2007 EN 54-4:997 EN 54-4:997/A:2002 EN 54-4:997/A2:2006 EN 54-4:997/AC:999 function FPC
Power supplies (fire detection/alarm components) (fire safety) suppression products (/) : Smoke, heat and flame detectors (fire safety) suppression products (/) : Alarm devices (fire safety) suppression products (/) : Manual call points (fire safety) suppression products (/) : Input/output devices (fire safety) suppression products (/) : Short circuit isolators (fire safety) suppression products (/) : Control and indicating devices (fire safety) 96/579/EC Circulation fixtures (/2) : Road marking products: Drop-on materials (glass beads, anti-skid aggregates and combinations of the two) (for circulation areas) 96/579/EC Circulation fixtures (/2) : Road lighting columns (for circulation areas) EN 54-5:2000/A:2002 EN 54-7:2000/A:2002 EN 54-7:2000/A2:2006 EN 54-3:200/A:2002 EN 54-3:200/A2:2006 EN 54-:200 EN 54-:200/A:2005 EN 54-8:2005 EN 54-8:2005/AC:2007 EN 54-7:2005 EN 54-7:2005/AC:2007 EN 2094-:2003 EN 54-2:997 EN 54-2:997/A:2006 EN 54-2:997/AC:999 EN 423:997/A:2003 EN 463-:997/ A:2003 EN 463-:2009 EN 40-5:2002 EN 40-6:2002 EN 40-7:2002
96/579/EC Circulation fixtures (/2) : Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: variable message traffic signs (for circulation areas) EN 2966-:2005 96/579/EC Circulation fixtures (2/2) : Anti-glare screens (for circulation areas) 3 EN 2676-:2000/A:2003 99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (/) : Doors and gates (with or without related hardware) (other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use) 99/47/EC Space heating appliances (/2) : Space heating appliances burning solid and liquid fuels (in buildings) 99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (/5) : Piping kits (in installations for the transport/distribution/ Safety ancillaries (in installations for the 3 3 3 EN 324-:2003 EN 3229:200 EN 3229:200/A:2003 EN 3229:200/A2:2004 EN 3229:200/A2:2004/AC:2006 EN 3229:200/A2:2004/AC:2007 EN 3229:200/AC:2006 EN 3240:200 EN 3240:200/A2:2004 EN 3240:200/A2:2004/AC:2006 EN 3240:200/A2:2004/AC:2007 EN 3240:200/AC:2006 EN 682:2002
transport/distribution/ Valves and taps (in installations for the transport/distribution/ Pipe/duct supports (in installations for the transport/distribution/ Ducts and conduits for protection (in installations for the transport/distribution/ Fittings, adhesives, joints, joint sealings and gaskets (in installations for the transport/distribution/
Leakage alarm systems and overfill prevention devices (in installations for the transport/distribution/ tanks (in installations for the transport/distribution/ 99/472/EC Pipes, tanks and ancillaries not in contact with water intended for human consumption (/5) : Pipes (in installations for the transport/distribution/ 3 EN 4800:2007
89/686/EEC Personal protective equipment Last update : 05/03/2009 Version(s): 2 s Procedures Articles/annexes *Equipment providing general body protection (clothing) against electrical risks *Equipment providing general body protection (clothing) against ionising radiation *Equipment providing hand protection against electrical risks *Equipment providing head protection against heat < 00 C *Equipment providing head protection against heat > 00 C and fire and flame *Protective equipment against electrical risks EC type-examination for ensuring EC quality of production by means of monitoring EC quality control system for the final product Art.0 Art.B Art.A 92/42/EEC Hot-water boilers Last update : Unknown (Notifications pre-dating 2006 are not available in these lists) s Procedures Articles/annexes Hot-water boilers fired with gaseous fuels ion quality Conformity to type quality EC type-examination Annex IV - Module E Annex IV - Module C Annex IV - Module D B 93/42/EEC Medical devices Last update : 9/06/2007 Version(s): 2 s Procedures Articles/annexes Limitations Equipment for electrosurgery and Anaesthetics equipment, incubators, ventilators, oxygen therapy equipment and Equipment for extracorporeal circulation, infusion, transfusion, haemophoresis and Equipment for dialysis and Equipment for checking and recording vital functions and Cardiac and muscular stimulation equipment and Full quality system EC typeexamination EC verification ion quality quality Annex II Annex III Annex IV
Dental equipment and Ophtalmological equipment and Equipment for aerosol therapy and Disposable syringes Urethral catheters, catheters for heart surgery and for the central cirulatory system Bags for parenteral and enteral nutrition and Auditory prostheses Equipment and for diagnosis and treatment using ultrasound Equipment and for diagnostic imaging, using ionising and non-ionising radiation Equipment and for treatment using ionising and non-ionising radiation Bone nails, screws and plates (including ) Contraceptive products Dressings Contact lenses and solutions for contact lenses Gloves for medical use dental implants and equipment for cryosurgery and equipment for disinfection and sterilization equipment for orthopaedic rehabilitation and Full quality system ion quality quality Full quality system EC typeexamination EC verification ion quality quality Full quality system ion quality quality Full quality system EC typeexamination EC verification ion quality quality Annex II Annex II Annex III Annex IV Annex II Annex II Annex III Annex IV
94/9/EC Equipment and protective systems intended for use in potentially explosive atmospheres Last update : 6/04/2009 Version(s): 2 3 s Procedures Articles/annexes Equipment and protective systems intended for use in potentially explosive atmospheres Internal control of production + receipt of technical file quality Unit verification ion quality Conformity to type verification EC type-examination Art. 8. (b) (ii) I Annex IX Annex IV Annex III 95/6/EC Lifts Last update : 08/09/2008 Version(s): 2 3 Lifts Safety components s Procedures Articles/annexes Full quality (for lifts) EC type-examination of lifts Unit verification (for lifts) quality (for lifts) ion quality (for lifts) Final inspection (for lifts) Full quality (for safety components) EC Type-examination of safety components Conformity to type with random checking (for safety components) quality (for safety components) Annex XIII B Annex X Annex XII Annex XIV Annex IX A Annex XI II
97/23/EC Pressure equipment Last update : 27/03/2009 Pressure equipment s Procedures Articles/annexes Internal manufacturing checks with monitoring of the final assessment EC type-examination Conformity to type ion quality quality EC unit verification verification Full quality with design examination and special surveillance of the final assessment Full quality quality ion quality EC design-examination A B C D E G F H H E D B 98/37/EC Machinery Last update : 0/02/2007 Version(s): 2 s Procedures Articles/annexes Hand-fed surface planing machines for woodworking (section A2 of annex IV) Thicknessers for one-side dressing with manual loading and/or unloading for woodworking (section A3 of annex IV) Band-saws with a fixed or mobile bed and band-saws with a mobile carriage, with manual loading and/or unloading, for working with wood and analogous materials or for working with meat and analogous materials (section A4 of annex IV) Combined machines of the types referred to in to 4 and 7 for working with wood and analogous materials (section A5 of annex IV) Hand-fed tenoning machines with several tool holders for woodworking (section A6 of annex IV) Hand-fed vertical spindle moulding machines for working with wood and analogous materials (section A7 of annex IV) Portable chainsaws for woodworking (section A8 of annex IV) EC type-examination of adequacy for the technical file Receipt of technical file Art.8, 2(b) and 2c, 3rd indent Art.8, 2(c), 2nd indent Art.8, 2(c), st indent
Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s. (section A9 of annex IV) Injection or compression plastics-moulding machines with manual loading or unloading (section A0 of annex IV) Injection or compression rubber-moulding machines with manual loading or unloading (section A of annex IV) Machinery for underground working of the following types : (section A2 of annex IV) Manually-loaded trucks for the collection of household refuse incorporating a compression mechanism (section A3 of annex IV) Guards and detachable transmission shafts with universal joints as described in section 3.4.7. (section A4 of annex IV) Vehicles servicing lifts (section A5 of annex IV) Devices for the lifting of persons involving a risk of falling from a vertical height of more than 3 metres (section A6 of annex IV) Machines for the manufacture of pyrotechnics (section A7 of annex IV) Electro-sensitive devices designed specifically to detect persons in order to ensure their safety (non-material barriers, sensor mats, electromagnetic detectors, etc.) (section B of annex IV) Logic units which ensure the safety functions of bi-manual controls (section B2 of annex IV) Automatic movable screens to protect the presses referred to in 9, 0 and (section B3 of annex IV) Roll-over protection structures (ROPS) (section B4 of annex IV) Falling-object protective structures (FOPS) (section B5 of annex IV) Circular saws (single or multiblade) for working with wood and analogous materials : (part of section A of annex IV) Circular saws (single or multi-blade) for working with meat and analogous materials : (part of section A of annex IV)
99/5/EC Radio and telecommunications terminal equipment Last update : 30/04/2007 Version(s): 2 s Procedures Articles/annexes Radio equipment and telecommunications terminal equipment Internal production control + specific apparatus tests Technical construction file Full quality Annex III Annex IV 2004/08/EC - Electromagnetic compatibility Last update : 27/07/2009 Version(s): 2 Electric and electronic appliances s Procedures Articles/annexes Evaluation of technical documentation Annex III 2004/22/EC Measuring Instruments Last update : 24/06/2008 s Procedures Articles/annexes Active Electrical Energy Meters (Annex MI- 003) Type-examination Declaration of conformity to type based on quality of the production process Declaration of conformity to type based on product verification Declaration of conformity based on full quality plus design examination Annex B Annex D Annex F Annex H 2006/95/EC (ex-73/23/eec) Low voltage directive Last update : 06/07/2009 Version(s): 2 3 s Procedures Articles/annexes Electrical equipment designed for use within certain voltage limits Report consequent on a challenge (Art 8) Opinion on a safeguard action (Art 9) Article 8 Article 9
2009/42/EC (ex-90/396/eec) Appliances burning gaseous fuels Last update : 07/05/2009 Version(s): 2 Appliances burning gaseous fuels s Procedures Articles/annexes EC type-examination EC verification by unit EC declaration of conformity to type (guarantee of product quality) EC declaration of conformity to type (guarantee of production quality) EC declaration of conformity to type EC verification Annex II. Annex II.6 Annex II.4 Annex II.3 Annex II.2 Annex II.5