A range of quality instrumentation to suit your monitoring needs 01367 899 554 www.shawcity.co.uk

about Shawcity Shawcity Limited were established in 1976 and supply a variety of instrumentation for Health & Safety, Occupational Hygiene and Environmental applications. We supply: l Noise Dosimeters l Photo Ionisation l Single Gas Monitors Detectors (PID s) l Multigas Monitors for Volatile Organic l Confined Space Monitors l Compounds (VOC s) l Dust Monitors l Ground Gas Monitors l Vibration Monitors l Sound Level Meters l Test & Calibration Stations We can offer you advice on which is the best instrument for your application, and can show you and your colleagues how to use it most effectively and train you how to use it, from informal toolbox talks to Certificate of Competence training. Our Specialist Technical Sales Engineers are based across the UK and can visit you to discuss your needs and demonstrate how our instruments can help you. Our equipment is available to hire or buy, and we can quote you based on your specific needs. We have a modern, fully equipped service facility where experienced, manufacturer-trained engineers look after your equipment with speed and efficiency. Our friendly team are always on hand to help you. Our channel partners are: Ion Science Gas Data 3M/Quest Biosystems/Sperian Calgaz Systronik Gilian/Sensidyne RAE Systems Reactec Crowcon

VOCs GROUND GAS SINGLE GAS MULTI GAS FLUE GAS FIXED SYSTEMS LEAK DETECTION SOUND & NOISE AIR QUALITY & DUST VIBRATION HEAT STRESS MERCURY BENZENE

what our customers think about us Shawcity is an excellent service provider. As a supplier of high quality Health and Safety technical products, they have always sought to provide a high quality and personable service Andrew Singleton Group Occupational Hygiene Manager Jaguar & Land Rover I have been extremely pleased with the professional service that Shawcity provided in order too help me understand the correct device for my enquiry. I trust their knowledge impeccably and have been impressed with both the quick response to queries and the high level of customer service. I would have no hesitation in recommending Shawcity to other individuals and companies an excellent service! David Cant Veritas Consulting Safety Services Ltd I have hired monitoring equipment from Shawcity and on each occasion I have found them reliable, knowledgeable and helpful - I would use them again Jed Kirkham Environmental Consultant, Wardell Armstrong The people at Shawcity are a very professional and friendly group always willing and able to help Simon Talbot Ground Gas Solutions

VOC MONITORS The PhoCheck Tiger PhoCheck Tiger is a revolutionary Photo Ionisation Detector for VOC s (Volatile Organic Compounds). There are 3 models in the range. All are upgradable from the basic variant. This hand held VOC detector has minipid technology providing the best available detection, software features and is all ready to use straight out of the box! l Patented Fence Electrode for improved response in humid conditions l Dynamic range ppb to 20,000 ppm for specific volatiles l Fast 2 second response l Hot swappable minipid sensor l Batteries certified to be changed within hazardous areas l 5 year instrument warranty l Fully upgradeable with selectable functions l Choice of data logging options l Battery life up to 30 hours, longer in special sleep mode l Intrinsically Safe ATEX approved l Rugged design with protective, removable rubber boot l Audible alarm l Bright LED and vibration alarms l Gas table of 250+ compounds and their individual response factors l 9.8, 10.6 and 11.7 ev lamps lwaterproof IP65 rated CALIBRATION GAS & VALVES Gas cylinders are used for bump testing purposes. A bump test and full calibration will validate the accuracy of your instrument. The bump test will verify the calibration by exposing the instrument to a small concentration of test gas.

VOC MONITORS PhoCheck + The PhoCheck + is a simple handheld surveying VOC monitor, measuring ppm concentrations up to 10,000. Optional ppb sensitivity. 4 models in the range. All models are upgradable from the basic to variant so you can adapt your PhoCheck to the work you are doing at any time in the future quickly and simply over the phone or via the supplied software. l Detection range 1 ppb 10,000 ppm l Intrinsically safe ATEX approved l Health & Safety mode for STEL and TWA monitoring l IRDA for wireless communications with a PC l Real-time graph display on screen l Data logging l PC software for instrument configuration and data handling l Easy-to-use graphical icon based interface l Audible alarm 90 dba lvisual alarm (LED) l Gas table of 250+ compounds and their individual response factors l Selectable mg/m3 or ppm/ ppb GROUND GAS & PID AWARENESS WORKSHOPS Shawcity are currently running Ground Gas Awareness and PID Workshops which give an overview of the applications, instruments used and their operation and can be carried out at your works at a time to suit you. These Awareness Workshops normally cost 250 + VAT per session but are FREE OF CHARGE to potential purchasers and hirers of our equipment.

VOC MONITORS MiniRAE 3000 The MiniRAE 3000 is an advanced handheld VOC (volatile organic compound) monitor. This model offers both upper and lower alarms, STEL and TWA alarms plus full data logging facilities. l3-second response time lextended range up to 15,000ppm with improved linearity lhumidity and temperature sensors lreal time wireless data transmission loptional built-in RF modem or Bluetooth leasy access to lamp and sensor luser friendly large graphic display lfield interchangeable battery pack lintegrated flashlight lgas table of 200+ compounds and their individual response factors EXTENDABLE PROBE OPTION

VOC MONITORS First Check The FirstCheck is a handheld VOC monitor with sensors for Oxygen, CO, H2S and LEL. There are four models in the range. All models are upgradable from basic to variant so you can adapt your FirstCheck to the work you are doing at any time in the future quickly and simply over the phone via the supplied software. FirstCheck is the only survey monitoring VOC instrument with additional confined space monitoring capabilities. l First multi-gas PID with sensors for oxygen, hydrogen sulphide, carbon monoxide and explosive gases (LEL) l Patented Fence Electrode Technology for humidity and contamination resistant operation lrapid response and recovery for fast detection l Detects VOCs from 1 ppb 10,000 ppm lintrinsically safe for use in flammable areas l Health & Safety mode for STEL and TWA llarge numerical back-lit display for easy viewing lchoice of readouts numeric or real-time graph plus individual or total sensor display l Traceability - automatic, continuous data logging luniversal graphical interface and icon driven menu system l Swift, simple data download via IRDA link to supplied software CERTIFICATE OF COMPETENCE TRAINING Certificate of Competence Training in the use of all the instruments we sell which can include both Operator (basic use of the instrument) and Supervisor (Operator level plus basic fault finding and data downloading) training with testing of the trainees knowledge and culminates in the issue of a Certificate of Competence in the use of the instrument. Training costs 495 + VAT for a 1 2 day session and 800 + VAT for a full days session depending on the complexity and number of personnel involved and is carried out at you works by our factory trained personnel.

GROUND GAS Gasclam Ground Gas Monitor The Gasclam Ground Gas Monitor allows for continuous gas monitoring of Landfill and Brownfield Sites and gives time relative and more quantitative view of any ground gas regime. The collection of comprehensive data can speed up site development for housing or commercial use and proves the long-term quality of gas produced for power generation from landfill sites. leasy installation in any size borehole l30 days high frequency data possible with rechargeable battery sampling every hour lmonitors Methane (CH4), oxygen (O2) and carbon dioxide (C02) lcollects data on temperature, borehole and atmospheric pressure loptional CO, H2S and VOC (PID) sensors lruns on two standard D-cell batteries lprogrammable borehole venting analyse purge and recovery of borehole luse with own software for setup and data downloading ltraceability - automatic, continuous data logging lmodem option for remote data viewing on the internet GROUND GAS & PID AWARENESS WORKSHOPS Shawcity are currently running Ground Gas Awareness and PID Workshops which give an overview of the applications, instruments used and their operation and can be carried out at your works at a time to suit you. These Awareness Workshops normally cost 250 + VAT per session but are FREE OF CHARGE to potential purchasers and hirers of our equipment.

GROUND GAS GFM 435 The GFM435 is the ultimate spot monitoring device for ground gas monitoring in boreholes. As well as the standard features expected of this type of monitor the GFM435 incorporates two unique features to aid investigative work. The first is a special PID Compensation Factor measurement to enhance the operation of your PID ( Photo Ionisation Detector) in methane rich atmospheres and the second is a Hexane equivalent reading as an indicator of common hydrocarbon vapours if present in the borehole. These features coupled with ATEX and the most comprehensive MCerts certification for any gas monitor in its class make the GFM435 the ultimate ground gas spot monitoring device. l 7 gas analysis as standard (CH4, CO2, LEL, O2, CO / H2S and C6H14) l PID Compensation Factor reading as standard l Hexane reading for other hydrocarbons as standard l Borehole & Atmospheric Pressure as standard l Low Flow Measurement as standard l Optional Temperature and velocity measurement l Optional Event logging and PC data download via USB port

GROUND GAS GFM 610 The GFM610 monitor is a portable instrument designed specifically to detect the flow of gas into or out of ground boreholes on landfill and contaminated land sites and is a direct replacement for the popular GF60 instrument. At the heart of the GFM610 is a precision mass flow transducer. It is pre-programmed to calculate standard volumetric flow rates and total standard volumes for any given mixture of CH4, CO2 and air. The relative concentrations are entered by the operator before the test and the correction factors are automatically applied to the data and displayed on the screen. This instrument is the perfect compliment to the GFM435 where more detailed gas flow measurement is required. l Designed to connect easily to standard 1 4 gas taps l Compensates for all concentrations of landfill gas l Measures gas flow rates as low as 0.1 l/hr l Measures bi-directional flow rate l Measures borehole pressures down to 1 Pa l Determines average flow over user defined time periods l Determines total volume discharge l Vane anemometer input l Suitable for monitoring as per CIRIA C665 & C669

SINGLE GAS ToxiPro The ToxiPro is a lightweight personal single gas monitor with replaceable battery and sensors. The ToxiPro displays High/ Low alarms with the option to show STEL, TWA and has both event and data logging capabilities which can be retrieved into BioTrak Software. l Sensor options: O2 CO SO2 H2S HCN PH3 NH3 Cl2 NO2 ClO2 l Small size and lightweight l Three visual alarm windows for increased worker safety l Large LCD display l Durable casing with IP67 rating l Robust fastening clip l Optional vibrating alarm l 2 years warranty IQ EXPRESS SELF CERTIFYING CALIBRATION STATION This fully automated bump test and calibration station performs up to eight critical tests, including visual and audible alarm integrity as well as predicted sensor life and automatic datadownloading. Can be used as a stand alone, connected to a PC via USB or as a node on your network.

SINGLE GAS Toxi Ltd and Toxi 3 Ltd The Toxi Ltd is a lightweight personal gas monitor for CO or H2S with a two year maintenance free life. There is also now a Toxi 3 Ltd which has a 3 year life and warranty. All instruments have a built in Event logger which records when gas is detected and can be retrieved into Bio Trak software. l Sensor options: CO or H2S l Small size and light weight l Clear visual and audible alarms (optional vibrating alarm) l Event logger : includes start time, end time and duration l Large LCD display l Robust fastening clip l Durable casing with IP67 rating l Water resistant and submersible housing IQ EXPRESS SELF CERTIFYING CALIBRATION STATION This fully automated bump test and calibration station performs up to eight critical tests, including visual and audible alarm integrity as well as predicted sensor life and automatic datadownloading. Can be used as a stand alone, connected to a PC via USB or as a node on your network.

MULTIGAS MultiPro - Confined Space Gas Detector Protection in the palm of your hand! The MultiPro is an easy to use confined space gas detector with one button operation and large easy to read display. l Sensor options: LEL, O2, LEL/O2, LEL/O2/CO, LEL/O2/ H2S, CO/H2s l Small size and lightweight l Large LCD display l Clear visual and audible alarms. (Optional vibrating alarm) l Automatic event and data logging l Robust fastening clip l Rechargeable or Alkaline battery versions available l Optional pump for remote sampling operations MULTIPRO IQ EXPRESS SELF CERTIFYING CALIBRATION STATION This fully automated bump test and calibration station performs up to eight critical tests, including visual and audible alarm integrity as well as predicted sensor life and automatic data downloading. Can be used as a stand alone, connected to a PC via USB or as a node on your network

MULTIGAS PHD6-MultiGas Monitor With the capability to measure up to 6 gases in one compact personal monitor the PHD6 gives unrivalled protection. There are many different sensor options making it one of the most configurable gas detectors on the market. A mixture of sensor technology can be accommodated. A Photo Ionisation Detector (PID) is available for VOC measurement, infrared sensors for CO2 and Methane, conventional LEL, Oxygen plus other toxic sensors. l Electrochemical Sensor Options, CO, H2S, SO2, NO, NO2, HCN,PH3, CL2, CLO2, NH3, CO-H,CO+ l PID Sensor Option (10.6 ev lamp) l IR CO2 Sensor and IR Methane (LEL) l Automatic event and optional data logging l Robust fastening clip l Optional vibrating alarm l Rechargeable batteries with up to 24 hour operation l Optional pump operation IQ6 SELF CERTIFYING CALIBRATION STATION This fully automated bump test and calibration station performs up to eight critical tests, including visual and audible alarm integrity as well as predicted sensor life and automatic data downloading. Can be used as a stand alone, connected to a PC via USB or as a node on your network.

FLUE GAS Blue Line Flue Gas Monitor Eurolyzer The Eurolyzer is ideal for the checking and servicing of domestic and industrial heating systems. The instrument is ideally suited for measurements on bi-valency combination and efficiency modulating BHKW heating installations up to a Lambda value of 1.00 and provides also an exact calculation of the Eta value for all combustion heating systems with fuel-specific dewpoint calculation.using the Eurolyzer will help reduce fuel bills and carbon emissions! l Touch screen operation l Measurement of: O2, CO, CO2, draft, temperature, efficiency l High resolution TFT colour monitor with brilliant contrast l Choice of display colours for measurement values l Highest flexibility through data storage on Micro-SD-Card l Extended CO measuring range with H2 compensation l Measurement with two active display levels l Separate measurement programmes for pressure and temperature l Powerful NiMH rechargeable battery block provides up to 8 hours of measurement l International plug connector system l Fully complies with BS EN50379 l Print to optional portable printer via infra-red link l Probe includes moisture trap filter l Bluetooth and SD Card options BLUE LINE BLUELYZER The new Bluelyzer gives a simple measurement of O2, CO, CO2, temp draft and efficiency for domestic and light industrial boilers. You can configure the Bluelyzer for any fuel type. The instrument is very easy to use, hand-held and durable as well as having the lowest cost out of all the Systronik range. If you are looking for a basic analyser with low cost the Bluelyzer is the instrument for you!

FLUE GAS Blue Line Flue Gas Monitor Multilyzer The Multilyzer is ideally suited for the checking and servicing of small and medium sized heating installations as well as for checking CO concentrations in gas-fired systems. In addition, the instrument can be used for measurements and adjustments on solid fuel systems, in particular for pellets, as well as bivalent, modulating combined heating and power plants. l Flue Gas Analysis/Temperature l Up to six sensors l Measurement of: NO, NO2,SO2 as well as high range CO is an option as well as standard measurements for O2, CO, CO2 temp and efficiency l Ambient Temperature l Draught/differential pressure l Accuracy of 0.2% Oxygen l Accuracy of 0.2% Carbon Dioxide l Accuracy down to 3ppm Carbon Monoxide with hydrogen compensation l Hydrogen-compensated CO Sensor l Energy efficient helping to reduce fuel bills l Fully complies with BS EN50379 l Print to optional printer l Probe includes moisture trap filter MULTILYZER CASE SHOWING SUPPLIED PROBE AND OPTIONAL INFRA RED PRINTER

FLUE GAS Blue Line Flue Gas Monitor Maxilyzer The Maxilyzer is a flue gas analysis computer with integrated printer and gas treatment unit housed in a robust and waterproof plastic case. Optimised gas distribution, an efficiently accommodated gas treatment system in the lid of the case and a second pump for the protection of the CO sensors make this a user and service friendly analysis computer which performs all daily measuring tasks reliably. l Flue Gas Analysis l Up to six sensors including NO, NO2, SO2, O2, CO, CO2 l Rugged waterproof case l USB data download l Flue Gas Temperature l Ambient Temperature l Draught/differential pressure l Measures Oxygen, Carbon Dioxide, Carbon Monoxide as standard l Fully complies with BS EN50379 l Built in industrial water trap filters OTHER BLUE LINE INSTRUMENTS IN THE RANGE INCLUDE PORTABLE PRESSURE MEASURING INSTRUMENT S2600 Ideal for the measurement of pressure, vacuum and differential pressure. The professional instrument series S2600 guarantees exact and precise measurement results in the measurement of gaseous media in industry, the medical field and air conditioning.

FIXED SYSTEMS TVOC The TVOC is a fixed total VOC (Volatile Organic Compounds) monitor. It is an extremely robust monitor and has a large clear display. It indicates the gas level in parts per million. The TVOC measures most VOC s including fuel vapours, solvent cleaners, paints, degreasers, adhesives and inks levels up to 1,000ppm. The TVOC can be used in a Zone 2 area without the need for safe barriers. Zone 1 area monitoring means barriers would be required. A 4-20 ma output allows integration into an existing gas system or a simple switching or data logging operation directly from the unit. For multiple deployment or where additional alarm functions are required the TVOC can be integrated with a simple control panel. l Patented Fence Electrode Technology for humidity and contamination resistant operation l Selectable detection range of 0 10 ppm, 0 100 ppm or 0 1000 ppm l Diffusive monitoring means no pump required l Scaled 4-20 ma analogue output l Operates at 5 to 28 V l - 20 to 50 oc operating temperature l 10.6 ev lamp operation only l Digital numerical display l Easy access PID sensor allows simple servicing l Simple calibration procedure OPTIONAL CONTROL PANEL OPTIONAL ALARMS AND LIGHT STACK

FIXED SYSTEMS System Plus System Plus is an all-in-one pumped sampling system which enhances the operation of TVOC Total VOC monitor. It is a completely self contained pumped solution with optional built in simple data logging facilities. System Plus can be both a permanent installation or used as a removable or temporary monitoring solution. l Robust dust and water trap filter on air input l Charcoal Filter l Continuous Pump with flow fail monitoring l Built in power supply can operate from 230V, ac, 100V ac or dc power options PID AND GROUND GAS AWARENESS WORKSHOPS Shawcity are currently running Ground Gas Awareness and PID Workshops which give an overview of the applications, instruments used and their operation and can be carried out at your works at a time to suit you. These Awareness Workshops normally cost 250 + VAT per session but are FREE OF CHARGE to potential purchasers and hirers of our equipment.

FIXED SYSTEMS Standard Fixed Gas Detection Systems A highly versatile range of detectors for monitoring flammable and toxic gases Available with electro chemical or Infra-red sensors. l Large range of sensor options l Low cost of ownership l Rugged and reliable l Easy to install and maintain l Can be wall or ceiling mounted l Accessories are available for duct mounting and sampling applications and remote gassing for simple sensor checking l Thermal conductivity sensors are available to monitor volume concentrations of gases l Poison resistant pellistors, for all flammable detection needs including hydrocarbons, hydrogen, ammonia, jet fuel, leaded petrol and vapours containing halogens l Housings manufactured using a choice of three materials: glass reinforced nylon, highly durable aluminium with a tough polyester coating, or 316 stainless steel for ultimate corrosion resistance l Spray deflectors and weather proof caps available SINGLE OR 4 CHANNEL CONTROL PANEL OPTION MULTI CHANNEL CONTROL PANEL OPTION OPTIONAL ALARM AND LIGHT STACK

FIXED SYSTEMS Plug and Play Fixed Gas Detection An innovative combined Plug-In Fixed Gas Detection System with integrai audible and visual alarms and data logging capabilities. l Sensor options: CO, H2S, SO2, CL2, PH3, CO-H, NH3, LEL and O2 l Rugged casing l Loud 105dB audible alarm l Highly visible flashing warning alarms l Can trigger auxiliary relays to turn on fans or open vents l Data downloaded to supplied BioTrak software l Intrinsically safe version coming soon BIOTRACK SOFTWARE FOR DATA MANAGEMENT

LEAK DETECTION GasCheck G The GasCheck G is designed specifically for the search and location of gas leaks such as helium, ammonia, argon, butane, hydrogen, SF6 and refrigerant gasses. Three models available in the range from basic to advanced with multiple gas options and event logging. All units are fully upgradeable throughout the range via the software provided. The Gascheck G detects almost any known gas or gas mixture and its micro-thermal conductivity sensor responds rapidly to the smallest of leaks. l Rapidly detects and measures almost any gas l Performs repeatable readings in choice of ppm or ml/sec l Robust, reliable and easy-to-use l Conveniently calibrated against helium l Audible alarms l Holds peak readings l LCD back lit display l Alkaline or Ni-MH rechargeable batteries CAL CHECK CALIBTATION DOCK WITH CONTROLLED LEAK GASCHECK 3000 IS OPTIONAL ATEX APPROVED INTRINSICALLY SAFE MODEL

SOUND & NOISE Edge Range of Dosimeters With the Edge there is no bulky, heavy dosimeter weighing you down. The instruments weigh a mere 3 grams and featuring a thin, contoured shoulder mount, you ll barely notice the Edge at work. There are 3 models in the range from basic to the advanced with C-A calculation option. The Edge has selectable options and data logging with time history values and the intuitive buttons on the instrument allow you to easily run, navigate and review data quickly or alternatively you can completely blank the screen, lock the instrument and set it up to run from QSPII software with starting and run times to suit you. l Convenient cable-free design l Thin, contoured shoulder mount l Extremely easy to use l Variable data logging l Rechargeable lithium polymer battery with over 60 hours of operation time l ATEX Approved (Edge 5 model) l Offered with 1 or 5 bay Edge Dock docking stations for quick and easy recharge l Downloads to QuestSuite Professional II for analysis and management of data via the docking station l QSPII Software Dose calculator QC-10 CALIBRATOR QSP II SOFTWARE

SOUND & NOISE NoisePro Noise Dosimeter and Data Logging Sound Level Meter This is a rugged, ATEX approved, and intrinsically safe full sized Dosemeter. An additional boom microphone can also be added so that the NoisePro can be used as an inexpensive, data logging sound level meter. The NoisePro can be set up from the simple front panel or from a PC via QuestSuite Pro software and is the Ideal instrument to use for compliance with the new Entertainment Noise Regulations. l Variable data logging l Large LCD display l Easy to use l Additional boom microphone available l ATEX Approved l OSP II Software dose calculator NOISEPRO OUTDOOR KIT Compact, Efficient Unit l Easy To Access l Easy To Mount l Unobtrusive In Use l Waterproof Sealable Box

SOUND & NOISE Sound Pro SE and DL The SoundPro SE/DL Series are Advanced Hand Held Sound Level Meters and Real Time Frequency Analysers. The instruments can be used with QuestSuite Professional II software to download and analyse data logged results. Meters can be equipped with 1/1 and/or 1/3 octave real-time frequency analysis facility. l Variable Data logging facility l Use with Quest Suite Professional II software for data management l Speech intelligibility and building acoustics options l Easy to use l A, C and Z weighting. C minus A calculation l High speed USB or removable SD memory to transfer data from instrument to PC l 12 available models available form the range to suit all applications l Type 1 and Type 2 microphones available l Integral tripod mount l RS2323 input for GPS, etc l Alkaline or rechargeable batteries, AC or DC power input options l Hearing protection calculation in software SOUNDPRO OUTDOOR KITS Two Outdoor Kit options will protect your instrument against the elements, tampering, vandalism and theft. Fixed and portable unit available. Features extended battery life with up to one week of continuous monitoring the weather proof case holds the meter and battery pack. Exposed components are made of stainless steel. The Portable Kit provides environmental protection inside a Peli weatherproof case.

SOUND & NOISE Basic Sound Level Meters Type 1 (Class 1) and Type 2 (Class 2) SLM including the 1100 and 1200 series. Quest Technologies Basic Series Sound Level Meters provide you with extremely easy-to-use tools for obtaining the most commonly required noise measurements, such as SPL, Lmin, Lmax, Leq/Lavg, and Peak. The basic Series delivers rugged and reliable performance that will not let you down. The instruments can be used for maintenance inspections and troubleshooting, occupational noise measurement, community noise assessment and environmental impact studies. l Easy to use l Large liquid crystal display l One-button field calibration l On-screen overload annunciator l CE marked for EMI & RFI emissions and susceptibility l Class/Type 1 or Class/Type 2 accuracy l Integral tripod mount l Light Weight l Convenient 9V alkaline power source l Fast and slow response modes l Displays SPL and Max SPL SD-200 NEW ENTRY LEVEL METER Integrating/Averaging Computes average sound pressure level for accurate assessment of intermittent sound levels User Selectable LED Alert Screen Provides quick visual reference of sound levels Rechargeable Battery Less ongoing maintenance and total cost of ownership QC20 DUAL LEVEL CALIBRATOR FOR USE WITH TYPE 1 METERS

AIR QUALITY & DUST EVM Range The EVM range of instruments offers particulate & air quality monitoring in one portable unit. The EVM3 is a real time direct reading particulate monitor with dial in PM2.5, PM4, PM10 and total dust capabilities using proven light scatter technology. The EVM4 is a comprehensive indoor air quality monitor with dew point, temp, humidity and air velocity measurement with gas and CO2 sensors fitted. The top of the range EVM 7 has all the above features with added VOC measurement capability with ppm or ppb scaling. l Individual functions or composite display l Rechargeable batteries, AC or DC power options l On screen information and trends plotted l Data logs all functions and downloads to QSP II software l Can also take gravimetric dust sample l Hand held or standard tripod mount l Protective outdoor kit for environmental applications l Analogue and digital options for alarm and control options GSP II SOFTWARE EVM OUTDOOR KIT

AIR QUALITY & DUST Nephelometer Advanced Hand Held Dust Monitor The Nephelometer is an advanced real-time dust monitor that accurately measures dust concentrations using proven light scatter technology. This portable instrument accurately measures and records dust from 1-10,000 μg/m3 with resolution to 1 μg/m3. Sample modes are selectable between 60 second sample, 15 minute STEL, or continuous sampling. l Reliable and rugged design l Temperature compensated l Durable rugged housing l Minimal moving parts l Highly portable l Rechargeable batteries are fully charged in less than 3 hours l Easy to use software allows programming of unique environmental profiles and recording sample data for USB down load to software supplied l Instant readings l Low cost of ownership CHALLENGER CALIBRATOR All Challenger calibrators are based on the air flow measurement principle of the Venturi. The instruments provide an LCD indication of Volumetric and Standard flow rate, barometric pressure and ambient temperature. It operates on four AA alkaline energy cells (batteries). The electronics are all housed in the control module. The instrument is furnished with two auto ranging Ventura, which cover the flow rate range of 1 to 30 Lpm.

AIR QUALITY & DUST GilAir Plus Range of Sampling Pumps The all new GilAir Plus Dust and Vapour sampling pump. This pump is the smallest and lightest personal monitor on the market today. This revolutionary monitoring capabilities mean that it can not only monitor dust but also gasses and vapours with both low and high flow settings in one unit. l The world s smallest and lightest personal dust and gas sampler with switchable High/Low Flow settings l Flow rate setting up to 5 litres/min. for dust l Flow rate setting down to 20 cc/min for gases and vapours l Constant flow operation regardless of significant back pressure loading l Temperature and pressure compensation option l Rechargeable batteries with an 8 hour minimum run time l Large display confirms Flow Rate, Sample Time and Sample Volume l Manual or programmed operation l Simple charging dock and 3.5 hour fast charge from fully discharged l Easy calibration routine l Computer interface to store programme set-ups and logged data via USB port on charger GILIBRATOR CALIBRATOR Sensidyne s Gilibrator-2 System is a primary calibrator and provides a convenient way to check almost any available air sampling pump for correct air flow function before deployment.

AIR QUALITY & DUST GilAir 3 and 5 Sampling Pumps The GilAir 3 and GilAir 5 are simple and reliable dust sampling pumps with a flow rate capability from 1 l/ min to 3 l/min and 5 l/min respectively. They have flow control built in to ensure accurate sampling with flow control to within 5% regardless of significant sample filter loading. l External Filter Housing allows an immediate visual inspection of filter condition l Easy to use l Flow Fault & Test Indicators light up if unit operates outside ± 5% of set flow rate l Battery Test indicator lights up when battery can provide a minimum of 8 hours of operation over operating range l Basic, Clock, & Program Models available l Program model provides delay start times up to 9999 minutes l Constant Low Flow module allows sampling from 5-500 cc/min l Constant Pressure (Multiflow) Module allows sampling from 1-750 cc/min l Now with nickel-metal hydride batteries GILIBRATOR CALIBRATOR Sensidyne s Gilibrator-2 System is a primary calibrator and provides a convenient way to check almost any available air sampling pump for correct air flow function before deployment.

AIR QUALITY & DUST Gilian 5000 The Gilian 5000 pump offers a flow rate up to 5000cc/ min. The instrument holds calibration for 30 days, even with atmospheric changes. The pump also has programmable automatic restarts when faults occur. This is a really tough pump, able to stand up to the toughest of industrial applications. l Up to 5 Litres per minute (LPM) l Easy to use l Highest back-pressure capability l Programmable l Live flow display l Memory free NiMH battery l Intrinsically Safe l Special lock out feature to prevent tampering l Easy operation GILIBRATOR CALIBRATOR Sensidyne s Gilibrator-2 System is a primary calibrator and provides a convenient way to check almost any available air sampling pump for correct air flow function before deployment.

VIBRATION The HavPro The HavPro is a fully integrated 3-channel instrument for obtaining tri-axial vibration measurements. This monitor is the ideal screening tool for quickly and simply determining the presence and magnitude of hazardous hand-arm and whole-body vibration levels. Exposure records are then downloaded to your computer via the OSP II software which provides a personal vibration Exposure Calculator. l Simultaneous triaxial measurement l Easy to use l Program and download software l Full training support and support l Quest Suite dynamic computer software for reports and graphs CERTIFICATE OF COMPETENCE TRAINING Certificate of Competence Training in the use of all the instruments we sell which can include both Operator (basic use of the instrument) and Supervisor (Operator level plus basic fault finding and data downloading) train- ing with testing of the trainees knowledge and culminates in the issue of a Certifi- cate of Competence in the use of the instrument. Training costs 495 + VAT for a 1 2 day session and 800 + VAT for a full days session depending on the complexity and number of personnel involved and is carried out at you works by our factory trained personnel.

VIBRATION The VI410 The Quest VI-410 is a four channel human vibration Monitor that can also be used as used as A Type 1 integrating real time sound analyser. The VI-410 utilizes the latest in digital signal processing technology. l 1/1 or 1/3 Octave Real-Time Analysis l Optional FFT Spectra Recording l Vibration RMS, Peak, VDV, MTVV or Max, Peak to Peak l Built-in frequency weightings per ISO 2631 and 5349 l Precision Class 1 Sound Level Meter l Acoustic Leq, SPL, SEL, Lpeak, Ln, and other CERTIFICATE OF COMPETENCE TRAINING Certificate of Competence Training in the use of all the instruments we sell which can include both Operator (basic use of the instrument) and Supervisor (Operator level plus basic fault finding and data downloading) train- ing with testing of the trainees knowledge and culminates in the issue of a Certifi- cate of Competence in the use of the instrument. Training costs 495 + VAT for a 1 2 day session and 800 + VAT for a full days session depending on the complexity and number of personnel involved and is carried out at you works by our factory trained personnel.

VIBRATION The HavMeter The HAVmeter is a small, durable device, carried throughout the working shift and magnetically attaches to hand held power tools and displays vibration exposure in line with the HSE s points system and alerts the employee on reaching legal limits. The HavMeter gives a running total of your vibration points exposure throughout the day and warns before high exposure levels are reached. Exposure records are then automatically downloaded to the base station and can be used to report on HAV policies. l Continuous and clear display of vibration dose to reduce high vibration exposure l Light weight l Easy to use l Designed for use on all tools, including pneumatic, mains and battery powered l Automatic HAV exposure record for each employee l Quality data on employee exposure, tool usage and tool vibration performance l Can be used to improve tool management processes THE HAVMETER BASE STATION The base station acts as the re- charge and docking bay for up to eight HAV units. When an employee swipes their personal ID card or enters their PIN number the base station tells each employee which HAVmeter to pick up, and they then keep that HAVmeter for the day, fitting it to each tool that they use. When the HAVmeter is returned to the base station, recharging begins and all information recorded throughout the day is automatically downloaded to the base station internal memory where it can be transferred to the Toolminder software using a standard memory card for further analysis.

HEAT STRESS AREA Heat Stress And WBGT Monitors The Quest Temp series monitors are Area Heat Stress monitors WBGT which give measurements used by Industry and Military worldwide to protect from high core body temperature and internal heat damage to vital organs. Personal - Quest Temp II The Quest temp II is a Personal Heat Stress monitor which measures via the ear canal Core Body temperature. It has visual and audible alerts and can be worn under clothing or pipe Logs & Outputs formatted reports to QSP II Software. FOR QUEST TEMP SERIES l Measure/calculate dry bulb, wet bulb & globe temperature, WBGT indoor/ outdoor, relative humidity and Heat Index/ Humidex l QT44 has unique Dry wet bulb for extreme conditions l PMV/PPD thermal comfort measurement (QT36/46 only) QSPII l Data logging option SOFTWARE l Robust design l Optional detachable air probe (QUEST Temp 36 and 46 only) l Use with Quest Suite Professional II FREE WBGT WALL CHART FOR QUEST TEMP II l Audio Alert l Lightweight l IP54 Water and Dust Resistance Rating l Summary and Detailed Time History Data l Real Time Clock l Small and compact l Easy to use l Use with Quest Suite Professional Software

MERCURY MVI The MVI is a portable Mercury Detector for continuous mercury measurement for up to 8 hours. This high performance pump means you know immediately when tiny levels of mercury vapour are present. The instrument also provides a highly accurate and almost instantaneous measurement. Multiple uses including; lighting manufacture, fluorescent tube, CRT, and LCD screen recycling plants. l Dual beam UV absorption technology l Fast 3 second response l Highly accurate measurement l High performance pump for fast indication and recovery l PTFE probe with moisture trap filter l Digital display l Simple, one-handed operation l Audible alarm l Robust design FREE MERCURY VAPOUR MONITORING PRESENTATION

MERCURY Autozeroing Mercury Indicator (AMI) The AMI is mains operated and provides you with 24 hour a day, 7 days a week indication and alarms to monitor background levels of Mercury. The audible alarm will warn you of high Mercury level and its unique, automatic zeroing routine, eliminates zero drift. The AMI s unique exchange measurement unit eliminates downtime and ensures ease of calibration. Multiple uses including; lighting, manufacturing, fluorescent tube, CRT, and LCD/recycling plants. CERTIFICATE OF COMPETENCE TRAINING Certificate of Competence Training in the use of all the instruments we sell which can include both Operator (basic use of the instrument) and Supervisor (Operator level plus basic fault finding and data downloading) training with testing of the trainees knowledge and culminates in the issue of a Certificate of Competence in the use of the instrument. Training costs 495 + VAT for a 1 2 day session and 800 + VAT for a full days session depending on the complexity and number of personnel involved and is carried out at you works by our factory trained personnel. l Fully automatic continuous operation l Monitors 24 hours a day, 365 days a year l Audible alarms l Visual alarms l Unique modular design for easy use l Continuous self testing ensures long term stability of readings l Water-resistant GRP casing (to IP66) l Rugged design

BENZENE UltraRAE 3000 The UltraRAE 3000 is used for measuring Benzene specifically but can also be used as a general VOC Monitor. Its Photoionization Detector s (PID) extended range of 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene- specific mode makes it an ideal instrument for applications from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring. l Proven PID technology l Easy to Use l Large graphic display l Easy access to lamp and sensor in seconds without tools l 3-second response in VOC mode/60 seconds in compound specific mode l Extended range up to 10,000 ppm (in VOC mode) with improved linearity l Humidity compensation with built-in humidity sensor l Automatic temperature-controlled sampling time calculation l Detects benzene down to 50 ppb (0.05 ppm) l Unique 15-minute Benzene STEL calculation with 15-minute real-time Benzene specific measurement and recording l Highly specific readings l New sampling probe design provides instant tube-breakthrough visibility l Extremely Versatile l VOC mode or Benzene specific mode for extreme versatility l Real-time wireless data transmission with built-in Bluetooth and optional RAELink3 portable modem

service and calibration Shawcity Limited were established in 1976 and supply a variety of instrumentation for Health & Safety, Occupational Hygiene and Environmental applications. At Shawcity we pride ourselves in supporting everything we sell from our Oxfordshire facility. Such is our level of expertise of our factory trained engineers that we can calibrate, overhaul and repair all the instruments that we supply. WHY SHOULD I USE SHAWCITY? l We can do all the work which means less downtime for you! l NO delays - NO shipping to the US or Europe l Reminders sent when calibration is due l Technical support from our friendly team l Software & firmware upgrades as standard l Fully equipped modern service department l Our experienced engineers are manufacturer-trained to l the highest available level enabling Shawcity to service every instrument sold l Authorised to repair intrinsically safe instruments to ATEX standards technical advice Shawcity technical sales engineers are on hand to give expert advice on the best type instrument for your application. We can show you just how simple it is to operate your monitor and what comprehensible data you will be able collect. Product Sales workshops are available to you at your site or at our Oxfordshire facility.

training If you are considering purchasing or hiring instruments or just want an overview of current practices and instruments available you should consider our Awareness Workshops. Shawcity are currently running both Photo Ionisation Detector (PID) and Ground Gas Analyser Awareness Workshops which give an overview of the applications, instruments used and their operation and can be carried out at your work at a time to suit you. These Awareness Workshops normally cost 250 + VAT per session but are FREE OF CHARGE to potential purchasers and hirers of our equipment. Shawcity also offer Certificate of Competence Training in the use of all the instruments we sell which can include both Operator (basic use of the instrument) and Supervisor (Operator level plus basic fault finding and data downloading) training with testing of the trainees knowledge and culminating in the issue of a Certificate of Competence in the use of the instrument. With this training you can be sure that your operators are fully conversant with the use and operation of their instrument. This can be particularly useful if you are working in partnership with local or municipal authorities or the Environment Agency where this type of training is often mandatory. Training costs 495 + VAT for a 1 2 day session and 800 + VAT for a full days session depending on the complexity and number of personnel involved and is carried out at your work place. TO ARRANGE A COURSE DATE PLEASE CONTACT 01367 899 554

shawcity hire SHAWCITY HIRE THE FOLLOWING INSTRUMENTS: l Single Gas monitors l Multi Gas Monitors l PID s (Photo Ionisation Detectors) l Ground Gas Monitors l Benzene Monitors l Confined Space Monitors l Noise, and Sound Level Meters l Vibration Monitors l Mercury Vapour Instruments l Heat Stress Monitors duration of service hire More instruments have been added to our Duration of Service Hire scheme. We fix our rate while we fix your instrument. For example you can have a UltraRAE or a PID for just 185 for the duration of the service of your instrument. For this we send you our instrument before you send yours in for servicing and you keep this for as long as it takes for us to service your instrument. We then return yours, and you have five working days to send ours back to us. ALL FOR A FIXED ONE-OFF COST OF JUST 185

about hiring from shawcity l A valid calibration certificate is provided with all instruments l All hires delivered before 12 noon as standard l More instruments have been added to our Duration of Service Hire scheme - a fixed rate whilst your instrument is serviced or calibrated l All our hire monitors are maintained by manufacturer trained engineers authorised to carry out work on their instruments l Please note work carried out by unauthorised engineers may affect the ATEX status l We can deliver direct to you or there is the option for pick up l Please call to confirm which product and optional extras you need so that we can make them available for you l Instrument hire available throughout the UK and Northern Ireland Please contact our Hire Team on 01367 899 554 or email hire@shawcity.co.uk

l This catalogue contains material sourced from responsibly managed forests, certified in accordance with the FSC (Forest Stewardship Council) l This catalogue is made from 10% recovered fibre, diverting waste from landfill l This catalogue is manufactured under strict environmental management systems, the international ISO 14001 standard, EMAS (Eco-Management & Audit Scheme) and the IPPC (Integrated Pollution Prevention and Control) regulation Not all features are available on every instrument shown, some may be optional extras. Please confirm exact configuration and specification of instruments with our technical support team or ask for written details. Subject to alteration without notice. Instrument hire is only available in the UK. E&OE. Shawcity Limited, Pioneer Road, Faringdon, Oxfordshire Tel: 01367 899 554 Fax: 01367 242 491 Email: info@shawcity.co.uk Website: www.shawcity.co.uk