I. COUNTRIES WITH MANDATORY STANDARDS FOR GOVERNMENT PROCUREMENT ONLY INDONESIA I. RATIONALE FOR REGULATION COUNTRY RATIONALE FOR REGULATION Indonesia Consumer Protection II. REGULATION BODY COUNTRY REGULATORY BODY Indonesia Ministry of Industry Ministry of Energy and Mineral Resources Ministry of Trade Page 1 of 17
III. LEGISLATIVE FRAMEWORK COUNTRY Indonesia LEGISLATIVE FRAMEWORK 1. Act No. 8 / 1999 concerning Consumer Protection 2. Act No. 3 / 2014 concerning Industry 3. Act No. 7 / 2014 concerning Trade 4. Act No. 20 /2014 concerning Standardization and Conformity Assessment. Government Regulation No. 102/2000 concerning National Standardization 6. Decree of the Minister of Industry No. 86/M-IND/PER/9/2009 concerning the Implementation of SNI in Industrial Sector 7. Decree of the Minister of Industry No. 1/M-IND/PER/3/2012 concerning The Procedures for Recognition of Certification Product of Electrical and Electronic Equipment Issued by Conformity Assessment Bodies Listed in ASEAN 8. Decree of the Minister of Energy and Mineral Resorces No. 01/2016 concerning The Procedures for Recognition of Product Certification and Product Test Report of Electrical and Electronic Equipment Issued by Conformity Assessment Bodies Listed in ASEAN 9. Decree of the Minister of Trade No. 24/M-DAG/PER/4/2016 concerning Standardization on Trade Sector Page 2 of 17
IV. MANDATORY STANDARDS Product type or grouping Domestic Standards Please tick box if mandatory STANDARDS Relevant International Standards Incandescent lamps SNI 04-360-1994 V IEC 60064 Ed.6 (1993-12) Self-ballast lamp for general lighting SNI 04-604-2001 V IEC 60968 Ed.1.0 service (1988-11) Plugs and socket-outlets for household and similar purposes. Part 1 : General requirement Switches for household installations and similar fixed electric. Part 1: General requirements Circuit breakers for over current protection for household and similar installation. Part 1 : Circuit breaker for a.c operated Electrical appliances for household usages and other similar types of safety products; Part 2-80. Special requirements for electric fan Lamp controlgears - Part 1: General and safety requirements Lamp controlgears - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps Indicate whether requires: State reason Safety (S), if MOD Environment HS Code (E), EMC, or combinatio n IDT S Extent of Alignment Type of Certification IDT S 839.31.30 SNI 04-3892.1-2006 V IEC 60884-1 (2002-06) IDT S 836.69.92 836.69.99 SNI 04-6203.1-2006 V IEC 60669-1 (2000) IDT S 836.0.61 836.0.69 836.0.99 SNI 04-607.1-2002 SNI 04-607.1-2002/Amd1. 2006 SNI 04-6292.2.80-2006 SNI 04-699.1-2003 SNI 04-699.2.3-2003 V IEC 60898-1 (2003) IDT S 836.20.91 836.20.99 V IEC 6033-2-80(2004-03) IDT S 8414.1.10 8414.1.91 8414.1.99 V IEC 61347-1 (2000-10) IDT S 804.10.00 V IEC 61347-2-3 (2000-10) IDT S 804.10.00 Page 3 of 17
Product type or grouping Residual current operated circuit - breakers without integral overcurrent protection for household and similar uses (RCCB) - Part 1: General rules Residual current operated circuitbreakers without integral overcurrent protection for household and similar uses (RCCB s) - Part 2-1: Applicability of the general rules to RCCB s functionally independent of line voltage Luminaires - Part 1: General requirements and tests Luminaires - Part 2-1: Particular requirements - Fixed general purpose luminaires Domestic Standards Please tick box if mandatory STANDARDS Relevant International Standards Extent of Alignment State reason if MOD Indicate whether requires: Safety (S), Environment (E), EMC, or combinatio n HS Code SNI 04-696.1-2003 V IEC 61008-1 (1996-12) IDT S 836.20.91 836.20.99 SNI 04-696.2.1-200 V IEC 61008-2-1 (1990-12) IDT S 836.20.91 836.20.99 SNI 4-6973.1-200 V IEC 6098-1 (2003) IDT S 940.10.30 940.10.40 940.10.90 SNI 4-6973.2.1-200 V IEC 6098-2-1 (1979) IDT S 940.10.30 940.10.40 940.10.90 Type of Certification Luminaires - Part 2-2: Particular requirements - Recessed luminaires Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting SNI 4-6973.2.2-200 SNI 4-6973.2.3-200 V IEC 6098-2-2 (1997) IDT S 940.10.30 940.10.40 940.10.90 V IEC 6098-2-3 (2002) IDT S 940.40.0 Luminaires - Part 2-: Particular requirements Floodlights SNI 4-6973.2.- 200 Primary Battery - part 1: General SNI 04-201.1-2004 V V IEC 6098-2- (1998): IDT S 940.10.30 940.40.20 940.40.40 IDT S 806.10.10 806.10.90 IEC 60086-1 (2000) 806.0.00 806.80.10 806.80.20 Page 4 of 17
Product type or grouping Primary Battery - part 2: Electrical and Physical Requirement PVC insulated cables with a rated voltage up to 40/70 V - Part 3: Nonsheated cables for fixed wiring PVC insulated cables with a rated voltage up to 40/70 V - Part 4: Sheated cables for fixed wiring PVC insulated cables with a rated voltage up to 40/70 V - Part : Flexible cables Domestic Standards Please tick box if mandatory STANDARDS Relevant International Standards Extent of Alignment State reason if MOD Indicate whether requires: Safety (S), Environment (E), EMC, or combinatio n HS Code SNI 04-201.2-2004 V IEC 60086-2 (2000) IDT S 806.10.10 806.10.90 806.0.00 806.80.10 806.80.20 SNI 04-6629.3-2006 V IEC 60227-3(1997-11) IDT S 844.11.20 844.11.30 844.11.40 844.11.90 844.49.22 SNI 04-6629.4-2006 V IEC 60227-4(1997-12) IDT S 844.11.20 844.11.30 844.11.40 844.11.90 844.42.94 844.42.9 844.42.96 844.42.97 844.49.22 SNI 04-6629.-2006 V IEC 60227-(2003-07) IDT S 844.11.20 844.11.30 844.11.40 844.11.90 844.42.94 844.42.9 844.42.96 844.42.97 844.49.22 844.49.23 844.49.41 Type of Certification Page of 17
Product type or grouping Safety of household and similar electrical appliances Part 2-41 : Particular requirements for pumps Domestic Standards SNI 04-6292.2.41-2003 Please tick box if mandatory STANDARDS Relevant International Standards V IEC 6033-2-41 (2002-10) Extent of Alignment State reason if MOD Indicate whether requires: Safety (S), Environment (E), EMC, or combinatio n HS Code IDT S 8413.70.42 8413.70.91 8413.81.13 Type of Certification Household and similar electrical appliances Safety Part 2-3: Particular requirements for electric irons SNI 04-6292.2.3-2003 V IEC 6033-2-3 (2002-03) IDT S 816.40.90 Audio, video and similar electronic apparatus Safety requirements SNI 04-623-2003 V IEC 6006 (2001 12) MOD 4.1.3 Unless otherwise specified, the tests are carried out under normal operating conditions at: - anambient temperature between 20 o C and 3 o C - a relative humidity of 70 % ± 1% maximum S 828.72.91 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers SNI IEC 6033-2- 40:2009 V IEC 6033-2-40 Ed 4.2 (200-07) IDT S 841.10.10 Page 6 of 17
Product type or grouping Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines Domestic Standards SNI IEC 6033-2- 24:2009 SNI IEC 6033-2- 7:2009 Please tick box if mandatory STANDARDS Relevant International Standards V IEC 6033-2-24 Ed 6.1 (200-04) V IEC 6033-2-7 (2004-11) Extent of Alignment State reason if MOD Indicate whether requires: Safety (S), Environment (E), EMC, or combinatio n HS Code IDT S 8418.10.11 8418.10.19 8418.21.10 8418.21.90 8418.29.00 8418.30.10 8418.30.90 8418.40.10 8418.40.90 IDT S 840.11.10 840.11.90 840.12.10 840.12.90 840.19.11 840.19.19 Type of Certification Page 7 of 17
V. MODE OF REGULATION AND TYPES OF CONFORMITY ASSESSMENT REGIMES COUNTRY Indonesia TYPES OF CON- FORMITY ASSESS- MENT REGIMES Technical Regulation based on SNI MODE OF REGULATION Technical regulation on EEE by adopting partially or fully technical specification and/or parameter of SNI is stipulated by Ministerial Decree taking into account safety, security, health, environment, moral hazard, and economical aspects, that are equally imposed to both domestic and imported products which are traded in Indonesian teritory. Manufacturers of EEE which are technically regulated based on SNI shall fulfill the SNI requirements and shall affix the SNI mark on the products, packages and/or label of their products Product Registration to get NPB (for imported products) or NRP (for domestic products) Pre-market surveillance over traded goods produced domestically, shall be done through Product Registration Number (Nomor Registrasi Produk - NRP) Pre-market surveillance over imported of EEE shall be done through Goods Registration Number (Nomor Pendaftaran Barang NPB), NRP and NPB shall be issued by the Director of Standardization and Quality Control, Ministry of Trade The validity of NRP and NPB are in accordance with the validity period of SPPT SNI. NRP or NPB shall affix underneath SNI Mark and/or other recognized conformity mark, on to their products or packages. Page 8 of 17
COUNTRY TYPES OF CON- FORMITY ASSESS- MENT REGIMES Registration of CAB MODE OF REGULATION as of 3 November 2017 CAB issuing an SNI Mark Product Certification can be a domestic or foreign product certification body supported by accredited testing laboratories and/or inspection institutions. Domestic CAB shall be accredited by KAN according to its scopes, CAB shall be registered to the Directorate of Standardisation and Quality Control, Ministry of Trade. All CAB which have the scope of mandatory SNI s requirements shall be accredited by National Accreditation Body of Indonesia (KAN) and assigned by Minister of Industry Page 9 of 17
VI. FLOWCHART OF INDONESIA S REGIME PROCEDURES FOR RECOGNITION OF CERTIFICATES OF EEE FROM CONFORMITY ASSESSMENT BODIES IN ASEAN COUNTRIES AMS Indonesia Product EEE ASEAN 1 Listed Product Certification Body for EEE 3 Product Certification Body SPPT SNI according to certification type ISO/IEC 17067 2 Listed Testing Lab. for EEE Legend: 1. Using Certificate of Conformity issued by AMS Listed Product Certification Body 2. Using Testing report issued by AMS Listed Testing Lab. Listed Testing lab have to be accredited for full parameter of the standards 3. Direct to Indonesia Registered Product Certification Body Page 10 of 17
EEE products from ASEAN countries could enter Indonesia through three mechanisms: 1. Using Certificate of Conformity (CoC) from Product CB outside Indonesia 1.1 Manufacturer certify their products in CB from outside Indonesia (Listed in ASEAN). 1.2 Importer submits an application to Registered CB in Indonesia to issue SPPT-SNI, by attaching required documents. 1.3 CB in Indonesia verifies the application and the documents. 1.4 In the case of questionable data/information in CoC and/or test report, CB in Indonesia may re-test the product. 1. In the case of different edition of referenced standard, modification, or others, CB in Indonesia may take test of untested parameters. 1.6 Based on verification result, CB in Indonesia may approve or reject the application. 1.7 CB in Indonesia will conduct market surveillance 1.8 CB in Indonesia will evaluate factory surveillance report conducted by foreign CB which issued CoC. 2. Using test report from testing laboratory in home country 2.1 Manufacturer test their product in Testing laboratory in their home country (Listed in ASEAN) 2.2 Importer submits an application to Registered CB in Indonesia to issue SPPT-SNI, by attaching required documents. 2.3 CB in Indonesia verifies the application and the documents. 2.4 In the case of questionable data/information in test report, CB in Indonesia may re-test the product. 2. In the case of different edition of referenced standard, modification, or others, CB in Indonesia may take test of untested parameters. 2.6 Based on verification result, CB in Indonesia may approve or reject the application. 2.7 In the case of the application is approved, CB in Indonesia will continue the certification process (including factory audit) and issues SPPT-SNI or reject the application. 2.8 CB in Indonesia will conduct market surveillance. Page 11 of 17
3. Using Indonesia Registered Product CB Manufacturer certify their products using Indonesia Registered Product CB. VII. MAINS VOLTAGE, FREQUENCY AND MAINS PLUG CONFIGURATION Country Indonesia Mains Voltage and Tolerance Mains Frequency and Tolerance Applicable Legislation Domestic Standard 230 % 0 % SNI 04-3892.1-2006 Plugs and socketoutlets for household and similar purposes. Part 1 : General requirement Please tick box if mandatory V Mains Plug Configuration Relevant Extent of International Alignment Standard - IEC 60884-1 Ed.3.0(2002,am.1 (2006) IEC 60884-2-1 Ed.1.0(1987) IEC 60884-2-3 Ed.1.0(1989) (0nly for the safety) Diagram of Mains Plug Configuration- SNI 04-3892.2.3-2000:Plugs and Sockets-Outlets for household and similar purposes;part 2.3:Particular Requirement for switched socket outlets without interlock for fixed installation. Page 12 of 17
Country Mains Voltage and Tolerance Mains Frequency and Tolerance Applicable Legislation Domestic Standard SNI 04-6202- 2000: Plugs and Sockets-Outlets and couplers for industrial purposes;part 3: Particular Requirement for plugs, socket outlets, connectors and appliance inlets for use in explosive gas atmospheres. SNI 04-022- 2000/Amd1-2006 on Amendment 1 of Indonesian National Standard for General Requirements on Electrical Installation Please tick box if mandatory Mains Plug Configuration Relevant Extent of International Alignment Standard - V IEC 60364 (series) Diagram of Mains Plug Configuration- Page 13 of 17
VIII. MARKING/LOGO : Affixing SNI and NRP Note: 101 : Product Certification Body certifying the products 010 : Factory Location 000001 : Registration Number in Directorate of Standardization and Quality Control Page 14 of 17
Affixing SNI and NPB Note: 101 : Product Certification Body certifying the products 16 : Country of Origin 000001 : Registration Number in Directorate of Standardization and Quality Control Page 1 of 17
IX. OTHER INFORMATION No Product Additional Requirement Link for Technical Regulation 1. Air Conditioner (AC) - Minimum class I Insulation - Supply cable must SNI certified 2. Refrigerator - Minimum class I Insulation - Supply cable must SNI certified - Plug must SNI certified - Gross capacity is calculated based on SNI ISO 102:2008 http://pustan.kemenperin.go.id/public/default/file_juknis/no _30_IUBTT_2013%20AC%20kulkas%20mesin%20cuci.pdf 3. Washing Machine - Minimum class I Insulation - Supply cable must SNI certified - Plug must SNI certified - Loading capacity is calculated based on IEC 6046 4. Water Pump - Minimum class I Insulation - Supply cable must SNI certified - Plug must SNI certified. Electric iron - Minimum class I Insulation - Supply cable must SNI certified - Plug must must SNI certified http://pustan.kemenperin.go.id/public/default/file_juknis/juk nis_sni_04-6292.2.3-2003%202.pdf 6. CRT Television - Minimum class II Insulation - Supply cable must SNI certified - Plug must SNI certified Page 16 of 17
X. CONTACT PERSON Country Indonesia JSC EEE Representative Officer Chandrini M. Dewi Director of Standardization and Quality Control Directorate General of Consumer Protection and Trade Compliance Ministry of Trade Jl. Raya Bogor KM 26 Ciracas - Jakarta Timur Telp : (021) 8710321/3Fax : 62-21-3863928 E-mail : chandrini.dewi@kemendag.go.id, ks.ditstandalitu@gmail.com Contact Person Konny Sagala, S.Si Head of Center for Cooperation on Standardization - BSN BPPT I Building Jl. M.H. Thamrin No. 8, Kebon Sirih Jakarta Pusat 10340 Indonesia Phone : 62-21-3927422 Fax : 62-21-392727 E-mail : konny@bsn.go.id, bilreg.bsn@gmail.com Designating Body Wahyu Purbowasito Setyo Waskito Head of Center for Standard Application System - BSN BPPT I Building Jl. M.H. Thamrin No. 8, Kebon Sirih Jakarta Pusat 10340 Indonesia Phone : 62-21-3927422 Fax : 62-21-392727 E-mail : db_indonesia@bsn.go.id Page 17 of 17