CHAPTER 17 STANDARDS STANDARDS Broadway, New York, NY 10018,

Similar documents
TABLE OF CONTENTS. Tentative Agenda. Tentative Order of Discussion. A2L Task Group Report III. Uniform Mechanical Code Change Public Comments

CHAPTER 15 REFERENCED STANDARDS. Air-Conditioning, Heating and Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203

Standard for tests for flammability of plastic materials for parts in devices and appliances

CHAPTER 15 REFERENCED STANDARDS SECTION MC 1502 STANDARDS. Number Title section number Manual D 95 Residential Duct Systems

CHAPTER 15 REFERENCED STANDARDS. Air-Conditioning, Heating and Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203

SECTION (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS

Second Revision No. 1-NFPA 90A-2016 [ Section No ] Submitter Information Verification. Committee Statement

CHAPTER 15 REFERENCED STANDARDS

The following preprint is based on the First Revision Draft of the 2018 edition of NFPA 54/Z223.1.

First Revision No. 2-NFPA [ Global Input ] Submitter Information Verification. Committee Statement. 1 of 11 1/18/2016 5:43 PM

CHAPTER 6 REFERENCED STANDARDS. American Architectural Manufacturers Association 1827 Walden Office Square Suite 550 Schaumburg, IL

CHAPTER 6 [CE] REFERENCED STANDARDS

Completed Projects / Projets terminés

2016 Uniform Solar Energy & Hydronics Code Technical Committee Meeting IAPMO World Headquarters, Ontario, CA October 26, 2016 AGENDA

Public Comment No. 23-NFPA [ Section No ] Statement of Problem and Substantiation for Public Comment Related Item

Public Input No. 1-NFPA 90B-2015 [ Chapter 2 ]

UNIFORM MECHANICAL CODE

CHAPTER 5 REFERENCED STANDARDS. American Architectural Manufacturers Association 1827 Walden Office Square Suite 550 Schaumburg, IL

TABLE OF CONTENTS. Part I Administrative... 1

NFPA 54 UPDATE. Paul Cabot American Gas Association

TABLE OF CONTENTS. Part I Administrative

First Revision No. 82-NFPA [ Detail ] Submitter Information Verification Submitter Full Name: Organization:

(a) Flame shall not spread to the outer extremities of the sample on the 8 ft 12 ft (2440 mm 3660 mm) wall. Flashover shall not occur.

Summary of BBS Proposed Ohio Mechanical Code Rule Changes October 2016

BSR/ASHRAE Addendum b to ANSI/ASHRAE Standard FORWORD

Read Only Copy Not For Distribution. Chapter 19. Referenced Standards 19.1 REFERENCED STANDARDS 19.2 STANDARDS ORGANIZATIONS

SECTION GENERAL-SERVICE COMPRESSED-AIR SYSTEMS

Gas Equipment. Volume 4 June/July Issue date: June 25, 2008

CUMULATIVE ANALYSIS OF UNIFORM MECHANICAL CODE CHANGES to 2003

Gas Equipment. Volume 3 April Issue date: April 29, 2009

IAS Accreditation Number Applied Research Laboratories of South Florida, LLC 5371 Northwest 161st Street Miami, Florida 33014

ASC Z223 SECOND PUBLIC REVIEW DRAFT

SECTION FUEL-FIRED DOMESTIC WATER HEATERS

Standard Compared 2012 Changes of the International Building Code and National Fire Protection Association- 101

Design and Construction Standards SECTION PLUMBING EQUIPMENT

Gas-fired water heaters, volume III, storage water heaters with input ratings above 75,000 Btu per hour, circulating and instantaneous

SECTION PLUMBING EQUIPMENT

IMC Significant Changes Summary Tier I

SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL-BURNING EQUIPMENT

SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL-BURNING EQUIPMENT

TABLE OF CONTENTS Board of Appeals General Limitations of Authority... 6 Table Mechanical Permit Fees...

Second Revision No. 5-NFPA [ Section No ] Supplemental Information. Submitter Information Verification. Committee Statement

SECTION (15530) - REFRIGERANT PIPING

APPUZO RANGE HOOD INSTALLATION

Listing of Water Heater Standards

SECTION PACKAGED, OUTDOOR, CENTRAL-STATION AIR-HANDLING UNITS

SECTION HEATING BOILERS

DESIGN GUIDELINES SPLIT TYPE AIR TO AIR HEAT PUMPS PAGE 1 of 6

TABLE OF CONTENTS. Part I Administrative... 1

IFGC-2012 AMENDED IFGC-2015 IFGC-2018 CHAPTER 1 SCOPE AND

GASEOUS HYDROGEN SYSTEMS

STANDARDS TASK GROUP REPORT

Fire Pump Specification

A. This Section includes the following domestic water piping specialties:

LABEL PLEASE NOTE: ALL APPLICATIONS AND SITE PLANS MUST BE COMPLETED IN BLACK OR BLUE INK ONLY

Throughout standard remove references to the following and replace with the following:


SECTION REFRIGERANT PIPING

CHAPTER 9 SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL BURNING EQUIPMENT

C. Manufactured double wall chimneys for fuel fired equipment. D. NFPA 54 - National Fuel Gas Code; National Fire Protection Association; 2009.

Chapter FUEL GAS CODE*

SECTION ELECTRIC WATER HEATERS

C O D E S & A M M E N D M E N T S

Mercy Hospital of Buffalo Catholic Health System 2 nd Floor Patient Holding Center 3 rd Floor Locker Rooms Shaflucas Architects, PC Project No.

SPECIFIC APPLIANCES CHAPTER 6

SCHEDULE OF FEES. Penalty Fees. Building Fee Schedule FEE

CHAPTER 5: EXHAUST SYSTEMS

MECHANICAL TESTING LABORATORY LIST OF APPROVED LISTING AND TESTING AGENCIES

SECTION DUCTWORK

RSES SERVICE APPLICATION MANUAL TABLE OF CONTENTS AUGUST 2016

SECTION (15530) - REFRIGERANT PIPING

A NATIONAL SET OF HYDROGEN CODES AND STANDARDS FOR THE US

Public Input No. 1-NFPA [ Global Input ] Statement of Problem and Substantiation for Public Input. Related Public Inputs for This Document

CHAPTER 14 MANDATORY REFERENCED STANDARDS TABLE 14-1

Address 3255 Pepper Ln., Suite 112 Las Vegas, NV 89120, USA

DUCT SYSTEMS CHAPTER 6

CHAPTER 14 REFERENCED STANDARDS TABLE REFERENCED STANDARDS STANDARD NUMBER STANDARD TITLE APPLICATION

CHAPTER 14 REFERENCED STANDARDS TABLE REFERENCED STANDARDS PRE-PRINT. STANDARD NumBER STANDARD TiTLE APPLiCATioN

1 Exam Prep Florida Building Code-Mechanical Tabs and Highlights

COHASSET, MA March 6, The following is the HVAC outline specifications, which defines the scope of work of the HVAC system.

Inspection Checklist Mechanical Rough in

EXPRESSION OF INTEREST (EOI) FOR. Fire Fighting System (FFS)

SECTION AIR COILS

A. Product Data: Include rated capacities, operating characteristics, furnished specialties, and accessories.

CHAPTER LOCAL AMENDMENTS TO THE INTERNATIONAL FUEL GAS CODE 2009 EDITION.

SECTION PLUMBING EQUIPMENT

WATER HEATERS / BOILERS GSB8-E. Gas-Fired Steam Boiler PRODUCT SPECIFICATIONS. AFUE up to 82.7% Heating Input 75,000 to 299,000 Btuh GSB E

Analysis of Changes for the 6 th Edition (2017) Florida Codes

TABLE OF CONTENTS Limitations of Authority...6 Table Swimming Pool, Spa, and Hot Tub Permit Fees...7

8501 E. Pleasant Valley Rd. Cleveland, OH 44131

REFRIGERANT PIPING

1. Product Data for Prerequisite EQ 1: Documentation indicating that units comply with ASHRAE 62.1, Section 5 - "Systems and Equipment.

GSB8. CONSERVATOR Gas-Fired Steam Boiler. AFUE up to 82.7% Heating Input 75,000 to 299,000 Btuh GSB S MODEL NUMBER IDENTIFICATION FEATURES

Lombard Fire Department Bureau of Fire Prevention COMMERCIAL HOOD & DUCT SYSTEMS

Location of Requirements Listed Category I appliances Type B gas vent 12.7 Listed appliances equipped with. Chimney Single wall metal pipe 12.

DOCUMENT TABLE OF CONTENTS

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

[Change Section as follows:]

SECTION DOMESTIC WATER PIPING SPECIALTIES

Transcription:

STANDARDS Chapter 17, Part II CHAPTER 17 STANDARDS 1701.0 Scope Part I of this chapter covers standards that are hereby declared to be part of this code. Part II of this chapter lists standards which relate to equipment and materials specified in this code, but are not adopted as part of this code. Part I Standards Adopted as Part of This Code UMC Standard 2-2 UMC Sections 209.0, 603.0 Title and Source: Galvanized Sheet Metals, Tentative Specification A525-64T of the American Society for Testing and Materials UMC Standard 6-2 UMC Section 506.2, 602.1, 602.5 Title and Source: Metal Ducts, First Edition, 1985 HVAC Duct Construction Standards, Metal and Flexible, published by the Sheet Metal and Air- Conditioning Contractors National Association UMC Standard 6-5 UMC Section 602.3 Title and Source: Installation of Factory-Made Air Ducts, 1 9 8 9 Fibrous Glass Duct Construction Standards, Published by the Thermal North America Insulation Manufacturers Association and Guidelines for Installing Flexible Ducts, F l e x i b l e Duct Performance and Installation Standards 4th Edition published by the Air Diffusion Council Part II Referenced Standards The f o l l o w i n g standards are intended for use as a guide in the design, testing, and installation of equipment regulated by this code. These standards are mandatory when required by sections in this code. Abbreviations referred to in this list: ACCA ANSI Air Conditioning Contractors of America 2800 Shirlington Road, Suite 300 Arlington, VA 22206, 703-575-4477 American National Standards Institute, Inc. ARI 1430 Broadway, New York, NY 10018, 212-642 - 4900 Air Conditioning and Refrigeration Institute, 4100 North Fairfax Drive, Suite 200, Arlington, VA 22203, 703-524-8800 ASHRAE American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc. 1791 Tullie Circle, NE Atlanta, GA 30329-2305, 404-636-8400 ASME American Society of Mechanical Engineers, United Engineering Center 345 E. 47th St. New York, NY 10017, 212-705-7722 ASTM American Society for Testing and Materials 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959 610-832-9500 IAPMO International Association of Plumbing and Mechanical Officials 5001 E. Philadelphia Street Ontario, CA 91761-2816 909-472-4100 I-B-R Institute of Boiler and Radiator Manufacturers, 393 Seventh Avenue, New York, NY 10001 NFPA NFPA International 1 Batterymarch Park Quincy, MA 02169 617-770-3000 SBI Steel Boiler Institute, 393 Seventh Avenue, New York, NY 10001 SMACNA Sheet Metal and Air Conditioning Contractors National Association, 4021 Lafayette Center Road, Chantilly, VA 22021 UL Underwriters Laboratories Inc., 333 Pfingsten Road, Northbrook, IL 60062 847-272-8800 R Reaffirmed as up-to-date. HEATING, VENTILATION AND AIR CONDITIONING AIR-CONDITIONING APPLIANCES, GAS-FIRED 269

Chapter 17, Part II UNIFORM MECHANICAL CODE ABSORPTION SUMMER, ANSI Z21.40.1-1981 Addenda Z21.40.1a-1982 AIR FILTER UNITS, ANSI/UL 900, 1994 CEILING DAMPERS, UL 555C, 1996 CENTRAL FURNACES, GAS-FIRED, ANSI Z21.47-1993 CLOSURE SYSTEMS FOR USE WITH FLEXIBLE AIR DUCTS AND AIR CONNECTORS, UL 181B, 1995 CLOSURE SYSTEMS FOR USE WITH RIGID AIR DUCTS AND AIR CONNECTORS, UL 181A, 1994 COMMERCIAL DUCT SYSTEMS, ACCA MA N U A L Q CONVERSION BURNERS, DOMESTIC GAS, ANSI Z21.17-1991 Addenda Z21.17a-1993 CONVERSION BURNERS, DOMESTIC GAS, INSTALLATION OF, ANSI Z21.8-1994 DIRECT GAS-FIRED INDUSTRIAL AIR HEATERS, ANSI Z83.18-1990 Addenda Z83.18a-1991 Addenda Z83.18b-1992 DIRECT GAS-FIRED MAKEUP AIR HEATERS, ANSI Z83.4-1991 Addenda Z83.4a-1992 DRAFT EQUIPMENT, UL 378, 1993 DRAFT HOODS, ANSI Z21.12-1990 Addenda Z21.12a-1993 Addenda Z21.12b-1994 DUCT FURNACES, GAS-FIRED, ANSI Z83.9-1990 Addenda Z83.9a-1992 DUCTED HEAT RECOVERY VENTILATORS, UL 1812, 1995 ELECTROSTATIC AIR CLEANERS, ANSI/UL 867, 2000 FIBROUS GLASS DUCT CONSTRUCTION STANDARD, SMACNA, 1992 FIRE DAMPERS, UL 555, 1999 FIXED AND LOCATION-DEDICATED ELECTRIC ROOM HEATERS, UL 2021, 1997 FLASHING AND STAND COMBINATION FOR AIR CONDITIONING UNITS (UNIT CURB), IAPMO PS 120-2000 FLOOR FURNACE, GAS-FIRED GRAVITY AND FAN TYPE, ANSI Z21.48-1992 FURNACES, SOLID-FUEL AND COMBINATION FUEL CENTRAL AND SUPPLEMENTARY, ANSI/UL 391, 1995 GAS HEATING EQUIPMENT, COMMERCIAL INDUSTRIAL (Inputs over 400,000 Btu per hour), UL 795, 1999 HEAT RESPONSIVE LINKS FOR FIRE PROTECTION SERVICE, ANSI/UL 33, 2001 HEATING AND COOLING EQUIPMENT, ANSI/UL 1995, 1995 HERMETIC REFRIGERANT MOTOR COMPRESSORS, ANSI/UL 984, 1996 HVAC DUCT CONSTRUCTION STANDARDS, METAL AND FLEXIBLE, SMACNA, 1995 Addendum 1, November 1997 INFRARED HEATERS, GAS-FIRED, ANSI Z83.6-1990 Addenda Z83.6a-1992 Addenda Z83.6b-1993 LIMIT CONTROLS, ANSI/UL 353, 1995 LOAD CALCULATION FOR COMMERCIAL SUMMER AND WINTER AIR CONDITIONING, ACCA Manual N FACTORY- MADE AIR DUCTS AND AIR CONNECTORS, UL 181, 1996 MECHANICAL REFRIGERATION, SAFETY CODE FOR, ANSI/ASHRAE 15-1994, Addenda C and D 270

STANDARDS Chapter 17, Part II NONDUCTED HEAT RECOVERY VENTILATORS, UL 1815, 2001 OIL BURNERS, ANSI/UL 296, 1998 OIL-FIRED AIR HEATERS AND DIRECT-FIRED HEATERS, UL 733, 1993 OIL-FIRED CENTRAL FURNACES, UL 727, 1994 OIL-FIRED FLOOR FURNACES, ANSI/UL 729, 1995 OIL-FIRED WALL FURNACES, ANSI/UL 730, 1995 OIL-FIRED UNIT HEATERS, ANSI/UL 731, 1995 PANEL HEATING, ASHRAE Systems Volume 1980 REFRIGERANT SPECIFICATIONS, ARI 700-99 RESIDENTIAL DUCT SYSTEMS, ACCA M A N U A L D RESIDENTIAL LOAD CALCULATION, ACCA MANUAL J ROOM HEATERS, GAS-FIRED Volume I, Vented Room Heaters, ANSI Z21.11.1-1991 Volume II, Unvented Room Heaters, ANSI Z21.11.2-1992 ROOM HEATER, SOLID-FUEL TYPE, ANSI/UL 1482, 1998 SMOKE DAMPERS, ANSI/UL 555S, 2001 SMOKE DETECTORS FOR DUCT APPLICATION, UL 268A, 1998 STANDARD TEST METHOD FOR STEADY-STATE THERMAL TRANSMISSION PROPERTIES BY MEANS OF THE HEAT FLOW METER APPARATUS, ASTM C 518, 1998 VENTILATION FOR ACCEPTABLE INDOOR AIR QUALITY, ASHRAE 62, 2001 WALL FURNACES, GAS-FIRED GRAVITY AND FAN-TYPE DIRECT-VENT, ANSI Z21.44-1991 Addenda Z21.44a-1992 WALL FURNACES, GAS-FIRED GRAVITY AND FAN-TYPE VENTED, ANSI Z21.49-1992 WATER HEATERS AND BOILERS BOILERS, GAS-FIRED LOW-PRESSURE STEAM AND HOT-WATER, ANSI Z21.13-1991 Addenda Z21.13a-1993 Addenda Z21.13b-1994 BOILERS, GAS UTILIZATION EQUIPMENT IN LARGE BOILERS, ANSI Z83.3-1971 Addenda Z83.3a-1972 Addenda Z83.3b-1976 (Reaffirmed 1983, 1989) BOILERS, LOW-PRESSURE CAST-IRON HEATING, I-B-R TESTING AND RATING CODE, I-B-R, Seventh Edition, January, 1966 BOILERS, STEEL, SBI TESTING AND RATING CODE, SBI, Tenth Edition, September, 1965 CONNECTORS FOR MOVABLE GAS APPLIANCES, ANSI Z21.69-1997, CSA 6.16-M97 CONVERSION BURNERS, DOMESTIC GAS, ANSI Z21.17-1991 Addenda Z21.17a-1993 Addenda Z21.17b-1993 CONVERSION BURNERS, DOMESTIC GAS, INSTALLATION OF, ANSI Z21.8-1994 THERMOSTATS, GAS APPLIANCE, ANSI Z21.23-1989 Addenda Z21.23a-1991 Addenda Z21.23b-1993 UNIT HEATERS, GAS, ANSI Z83.8-1990 COUNTER APPLIANCES, FOOD SERVICE EQUIPMENT, GAS, ANSI Z83.14-1989 DRAFT EQUIPMENT, UL 378, 1993 DRAFT HOODS, ANSI Z21.12-1990 271

Chapter 17, Part II UNIFORM MECHANICAL CODE Addenda Z21.12a-1993 Addenda Z21.12b-1994 ELECTRIC BOOSTER AND COMMERCIAL STORAGE TANK WATER HEATER, ANSI/UL 1453, 1995 FLEXIBLE METALLIC WATER CONNECTORS, IAPMO PS 14-2001 GAS HEATING EQUIPMENT, COMMERCIAL INDUSTRIAL (Inputs over 400,000 Btu per hour), UL 795, 1999 GAS-FIRED STEAM AND HOT WATER BOILERS AND ADDENDA, ANSI Z21.13-87 GAS WATER HEATERS Volume I, Storage Water Heaters with Input Ratings of 75,000 Btu per Hour or Less, ANSI Z21.10.1-90 Volume III, Storage with Input Ratings above 75,000 btu per Hour, Circulating and Instantaneous Water Heaters, ANSI Z21.10.3-90 HEATING, WATER SUPPLY, AND POWER BOILERS ELECTRIC, ANSI/UL 834, 1998 HOUSEHOLD ELECTRIC STORAGE TANK WATER HEATERS, ANSI/UL 174, 1996 LIMIT CONTROLS, ANSI/UL 353, 1995 COMMERCIAL ELECTRIC DISHWASHERS, ANSI/UL 921, 1996 COMMERCIAL REFRIGERATORS AND FREEZERS, ANSI/UL 471, 1995 COUNTER APPLIANCES, FOOD SERVICE EQUIPMENT, GAS, ANSI Z83.14-1989 Addenda Z83.14a-1990 Addenda Z83.14b-1991 DEEP FAT FRYERS, FOOD SERVICE EQUIPMENT, GAS, ANSI Z83.13-1989 Addenda Z83.13a-1990 Addenda Z83.13b-1991 DRAFT EQUIPMENT, UL 378, 1993 DRAFT HOODS, ANSI Z21.12-1990 Addenda Z21.12a-1993 Addenda Z21.12b-1994 ELECTRIC HOUSEHOLD COOKING AND FOOD SERVING APPLIANCES, UL 1026, 1995 EXHAUST HOODS FOR COMMERCIAL COOKING EQUIPMENT, ANSI/UL 710, 1995 FIRE TESTING OF FIRE EXTINGUISHING SYSTEMS FOR PROTECTION OF RESTAURANT COOKING AREAS, UL 300, 1996 OIL BURNERS, ANSI/UL 296, 1998 OIL-FIRED BOILER ASSEMBLIES, UL 726, 1995 OIL-FIRED STORAGE TANK WATER HEATERS, UL 732, 1997 SWIMMING POOL HEATERS, GAS-FIRED, ANSI Z 2 1. 5 6-1 9 9 8 Addenda Z21.56a-1993 Addenda Z21.56b-1994 COOKING EQUIPMENT COMMERCIAL ELECTRIC COOKING APPLIANCES, ANSI/UL 197, 1993 FOOD SERVICE EQUIPMENT BAKING AND ROASTING OVENS, GAS, ANSI Z83.12-1989 Addenda Z83.12a-1990 Addenda Z83.12b-1991 GREASE DUCTS, UL 1978, 2002 GREASE FILTERS FOR EXHAUST DUCTS, UL 1046, 2000 HOUSEHOLD COOKING GAS APPLIANCES, ANSI Z21.1-1993 HOUSEHOLD ELECTRIC RANGES, ANSI/UL 858, 2001 ANSI Z83.15-1989 KETTLES, STEAM COOKERS 272

STANDARDS Chapter 17, Part II AND STEAM GENERATORS, FOOD SERVICE EQUIPMENT, GAS OIL BURNERS, ANSI/UL 296, 1998 VENTING SYSTEMS, TYPE L, LOW TEMPERATURE, ANSI/UL 641, 1995 FIREPLACES AND ACCESSORIES OIL-BURNING STOVES, UL 896, 1997 OUTDOOR COOKING GAS APPLIANCES, ANSI Z21.58-1993 RANGES AND UNIT BROILERS, FOOD SERVICE EQUIPMENT, GAS, ANSI Z83.11-1989 Addenda Z83.11a-1990 Addenda Z83.11b-1991 VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS, NFPA 96, 1998 CHIMNEYS AND VENTS CHIMNEY LINERS, ANSI/UL 1777, 1996 CHIMNEYS, FACTORY-BUILT, MEDIUM-HEAT APPLIANCE, ANSI/UL 959, 2000 CHIMNEYS, FACTORY-BUILT, RESIDENTIAL TYPE AND BUILDING HEATING APPLIANCE, ANSI/UL 103, 2001 CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES, NFPA 211, 2000 DRAFT EQUIPMENT, UL 378, 1993 GAS VENTS, ANSI/UL 441, 1999 DECORATIVE GAS APPLIANCES, VENTED, ANSI Z 2 1. 5 0-1 9 8 9 Addenda Z21.50a-1990 Addenda Z21.50b-1991 DECORATIVE GAS APPLIANCES FOR INSTALLATION IN SOLID-FUEL BURNING FIREPLACES, ANSI Z21.60-1991 FIREPLACE ACCESSORIES, ANSI/UL 907, 1996 FIREPLACE STOVES, ANSI/UL 737, 1996 FIREPLACES, FACTORY-BUILT, ANSI/UL 127, 1998 LAUNDRY EQUIPMENT CLOTHES DRYERS, GAS Volume I, Type 1 Clothes Dryers, ANSI Z21.5.1-1992 Volume II, Type 2 Clothes Dryers, ANSI Z21.5.2-1987 Addenda Z21.5.2a-1990 Addenda Z21.5.2b-1992 ELECTRIC CLOTHES DRYERS, ANSI/UL 2158, 1997 ELECTRIC CLOTHES WASHING MACHINES AND EXTRACTORS, ANSI/UL 2157, 1997 ELECTRIC COMMERCIAL CLOTHES-DRYING EQUIPMENT, UL 1240, 1994 ELECTRIC COMMERCIAL CLOTHES-WASHING EQUIPMENT, UL 1206, 1994 VENT DAMPER DEVICES FOR USE WITH GAS- FIRED APPLIANCES, AUTOMATIC, ANSI Z21.66-1994 VENT OR CHIMNEY CONNECTOR DAMPERS FOR OIL-FIRED APPLIANCES, ANSI/UL 17, 1995 VENTING SYSTEMS FOR GAS-BURNING APPLIANCES, CATEGORIES II, III, AND IV, UL 1738, 2000 VENT DAMPER DEVICES FOR USE WITH GAS- FIRED APPLIANCES, AUTOMATIC, ANSI Z21.66-1994 VALVES, REGULATORS, AND GAUGES EARTHQUAKE ACTUATED AUTOMATIC GAS SHUTOFF SYSTEMS, ANSI Z21.70-1981 GAUGES, INDICATING PRESSURE, FOR 273

Chapter 17, Part II UNIFORM MECHANICAL CODE COMPRESSED GAS SERVICE, ANSI/UL 404, 1997 EXPLOSION PREVENTION SYSTEMS, NFPA 69, 1997 GAUGES AND INDICATORS, LIQUID LEVEL, FOR ANHYDROUS AMMONIA AND LP-GAS, UL 565, 1998 LIQUID LEVEL INDICATING GAUGES FOR OIL BURNER FUELS, ANSI/UL 180, 1997 EXTERNAL CORROSION PROTECTION SYSTEMS FOR STEEL UNDERGROUND STORAGE TANKS, UL 1746, 1993 FLAME ARRESTERS, ANSI/UL 525, 1995 MANUALLY OPERATED METALLIC GAS VALVES (LINE TYPE) FOR USE IN GAS PIPING SYSTEMS UP TO 125 PSIG (SIZES 1/2 THROUGH 2), ANSI/ASME B16.33 90 REGULATORS, COMPRESSED GAS, ANSI/UL 252, 1996 REGULATORS, LP-GAS, ANSI/UL 144, 2001 VALVES, AUTOMATIC FOR GAS APPLIANCES, ANSI Z21.21-1993 VALVES, CONSTANT-LEVEL OIL, UL 352, 1997 VALVES, ELECTRICALLY OPERATED, ANSI/UL 429, 1999 VALVES FOR ANHYDROUS AMMONIA AND LP GAS (OTHER THAN SAFETY RELIEF), ANSI/UL 125, 2001 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE, NFPA 30, 2000 HOSE, FLEXIBLE METALLIC, ANSI/UL 536, 2000 HOSE, LP-GAS, ANSI/UL 21, 1996 PIPE THREADS, ANSI B2.1, 1990 PROTECTIVELY COATED PIPE (INSTALLATION) IS 13-1991 STEEL AUXILIARY TANKS FOR OIL-BURNER FUEL, UL 443, 1996 STEEL TANKS FOR OIL-BURNER FUEL, ANSI/UL 80, 2000 PUMPS VALVES FOR APPLIANCES, APPLIANCE CONNECTOR, ANSI Z21.15-1992 PUMPS FOR OIL-BURNING APPLIANCES, ANSI/UL 343, 1998 VALVES FOR FLAMMABLE FLUIDS, ANSI/UL 842, 1999 PUMPS, POWER OPERATED FOR ANHYDROUS AMMONIA AND LP-GAS, ANSI/UL 51, 1999 VALVES AND HOSE VALVES, MANUALLY OPERATED GAS, ANSI Z21.15-1992 VALVES, RELIEF AND AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS, ANSI Z21.22-1986 Addenda Z21.22a-1990 VALVES, SAFETY RELIEF FOR ANHYDROUS AMMONIA AND LP-GAS, UL 132, 1997 SOLDERING SOLDERING FLUXES, ASTM B 813, 1993 SOLDERING PROCEDURE FOR CAPILLARY SPACE JOINTS IN COPPER AND COPPER ALLOY TUBE AND FITTINGS, ASTM B 828, 1992 SOLDERS, ASTM B 32, 1996 FUEL STORAGE TANKS AND PIPING REFRIGERATION DRYSEAL PIPE THREADS, ANSI B2.2, 1968 PUMPS FOR OIL-BURNING APPLIANCES, ANSI/UL 343, 1998 274

STANDARDS Chapter 17, Part II PUMPS, POWER OPERATED FOR ANHYDROUS AMMONIA AND LP GAS, ANSI/UL 51, 1999 REFRIGERANT RECOVERY/RECYCLING EQUIPMENT, UL 1963, 1995 REFRIGERANT-CONTAINING COMPONENTS AND ACCESSORIES, NON-ELECTRICAL, ANSI/UL 207, 2001 REFRIGERANT DESIGNATION AND SAFETY CLASSIFICATION, ANSI/ASHRAE 34-2000 REFRIGERANT PIPING, INCLUDING VALVES, FITTINGS AND WELDING, ANSI B31.5 1992 REFRIGERANT SPECIFICATIONS, ARI 700-99 REFRIGERATORS USING GAS FUEL, ANSI Z21.19-1983 UNIT COOLERS, REFRIGERATION, ANSI/UL 412, 2001 APPLIANCE CONNECTORS AND HOSES CONNECTORS, METAL, FOR GAS APPLIANCES, ANSI Z21.24-1993 Addenda Z21.24a-1993 CONNECTORS FOR MOVABLE GAS APPLIANCES, ANSI Z21.69-1997, CSA 6.16-M97 FLEXIBLE METALLIC WATER CONNECTORS, PS-14-89 GAS HOSE CONNECTORS FOR PORTABLE INDOOR GAS-FIRED APPLIANCES, ANSI Z21.2-1992 GAS HOSE CONNECTORS FOR PORTABLE OUTDOOR GAS-FIRED APPLIANCES, ANSI Z21.54-1987 ILLUMINATING APPLIANCES, GAS-FIRED, ANSI Z 2 1. 4 2-1 9 7 1 Addenda Z21.42a-1973 Addenda Z21.42b-1981 PIGTAILS AND FLEXIBLE HOSE CONNECTORS FOR LP-GAS, ANSI/UL 569, 1994, 2000 QUICK-DISCONNECT DEVICES FOR USE WITH GAS FUEL, ANSI Z21.41-1989 Addenda Z21.41a-1990 Addenda Z21.41b-1992 FUEL GAS COMPONENTS AND OTHER APPLIANCES GAS-FIRED CONSTRUCTION HEATERS, ANSI Z83.7-1990 Addenda Z83.7a-1991 Addenda Z83.7b-1993 INCINERATORS, RESIDENTIAL, UL 791, 1993 STANDARD FOR FUEL CELL POWER PLANTS, ANSI Z21.83, 1998 TOILETS, GAS-FIRED, ANSI Z21.61-1983 (Reaffirmed 1989) FUEL GAS COMPONENTS AUTOMATIC GAS IGNITION SYSTEMS AND COMPONENTS, ANSI Z21.20-1993 AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION, ANSI Z21.71-1993 COMPRESSED NATURAL GAS (CNG) VEHICULAR FUEL SYSTEMS, ANSI/NFPA 52-1992 LIQUEFIED PETROLEUM GAS CODE, NFPA 58, 2001 NATIONAL FUEL GAS CODE, ANSI Z223.1, NFPA 54, 2002 PILOT GAS FILTERS, ANSI Z21.35-1989 Addenda Z21.35a-1993 STANDARD FOR THE INSTALLATION OF STATIONARY FUEL CELL POWER PLANTS, NFPA 853, 2000 OTHER CLIMATIC CONDITIONS FOR THE UNITED STATES, 1989, ASHRAE H A N D B O O K FUNDAMENTALS, CHAPTER 24, T A B L E 1, 275

Chapter 17, Part II UNIFORM MECHANICAL CODE COLUMN 6 OF BUILDING MATERIALS, ANSI/UL 723, 1996 FIRE TEST FOR HEAT AND VISIBLE SMOKE RELEASE FOR DISCRETE PRODUCTS AND THEIR ACCESSORIES INSTALLED IN AIR HANDLING SPACES, UL 2043, 1996 FIRE TEST OF PLASTIC SPRINKLER PIPE FOR FLAME AND SMOKE CHARACTERISTICS, UL 1887, 1996 FIRE TEST OF PNEUMATIC TUBING FOR FLAME AND SMOKE CHARACTERISTICS, UL 1820, 1997 FUEL OIL, CANADIAN GOVERNMENT SPECIFICATION BOARD, 3-GP-28 INSTALLATION OF OIL-BURNING EQUIPMENT, NFPA 31, 2001 NATIONAL ELECTRICAL CODE, NFPA 70, 2002 SPECIFICATION FOR FUEL OIL, ANSI/ASTM D 396-1997 STANDARD ON EXPLOSION PREVENTION SYSTEMS, NFPA 69, 1997 THERMOPLASTIC PIPE AND FITTINGS COMPOUNDS, RECOMMENDED HYDROSTATIC STRENGTHS AND DESIGN STRESSES, PPI TECHNICAL REPORT TR-4, August, 1978 STANDARDS SORTED BY AGENCY ACCA Air Conditioning Contractors of A m e r i c a 2800 Shirlington Road, Suite 300 Arlington, VA 22206 703-575-4477 www.acca.org ACCA M A N U A L D RESIDENTIAL DUCT SYSTEMS ACCA M A N U A L J RESIDENTIAL LOAD CALCULATION ACCA M A N U A L N LOAD CALCULATION FOR COMMERCIAL SUMMER AND WINTER AIR CONDITIONING STANDARD FOR CHIMNEYS, FIREPLACES, VENTS AND SOLID FUEL BURNING APPLIANCES, NFPA 211, 2000 STANDARD METHOD OF TEST OF SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS, NFPA 255, 2000 STANDARD METHOD OF TEST FOR FLAME TRAVEL AND SMOKE OF WIRES AND CABLES FOR USE IN AIR-HANDLING SPACES, NFPA 262, 1999 ACCA M A N U A L Q COMMERCIAL DUCT SYSTEMS ANSI ANSI B2.1-1990 American National Standards Institute, Inc. 1430 Broadway New York, NY 10018 212-642-4900 www.ansi.org PIPE THREADS STANDARD FOR PREVENTION OF FIRE AND DUST EXPLOSION FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COM- BUSTIBLE PARTICULATE SOLIDS, NFPA 654, 2000 STANDARD SPECIFICATION FOR METAL COLD FLARE COMPRESSION FITTINGS WITH DISK SPRINGS FOR CROSS-LINKED POLYETHYLENE (PEX) TUBING, ASTM F 1961, 1999 ANSI B2.2-1968 ANSI B31.5-1992 ANSI Z21.1-1993 DRYSEAL PIPE THREADS REFRIGERATION PIPING, I N C L U D I N G VALVES, FITTINGS AND WELDING HOUSEHOLD COOKING GAS APPLIANCES TEST FOR SURFACE BURNING CHARACTERISTICS ANSI Z21.2-1992 GAS HOSE CONNECTORS 276

STANDARDS Chapter 17, Part II ANSI Z21.5.1-1992 ANSI Z21.5.2-1987 Addenda Z21.5.2a-1990 Addenda Z21.5.2b-1992 FOR PORTABLE INDOOR GAS-FIRED APPLIANCES CLOTHES DRYERS, GAS, Volume I, Type 1 Clothes Dryers CLOTHES DRYERS, GAS, Volume II, Type 2 Clothes Dryers ANSI Z21.18-1993 ANSI Z21.19-1983 ANSI Z21.20-1993 ANSI Z21.21-1993 PRESSURE REGULATORS, GAS APPLIANCE REFRIGERATORS USING GAS FUEL AUTOMATIC GAS IGNITION SYSTEMS AND C O M P O N E N T S VALVES, AUTOMATIC FOR GAS APPLIANCES ANSI Z21.8-1994 CONVERSION BURNERS, DOMESTIC GAS, INSTALLATION OF ANSI Z21.10.1-1990 GAS WATER HEATERS, Vol. I, Storage Water Heaters with Input Ratings of 75,000 Btu per Hour or Less ANSI Z21.10.3-1990 GAS WATER HEATERS, Vol. III, Storage with Input Ratings Above 75,000 Btu per Hour, Circulating and Instantaneous Water Heaters ANSI Z21.11.1-1991 ROOM HEATERS, GAS-FIRED, Volume I, Vented Room Heaters ANSI Z21.22-1986 Addenda Z21.22a-1990 ANSI Z21.23-1989 Addenda Z21.23a-1991 Addenda Z21.23b-1993 ANSI Z21.24-1993 ANSI Z21.35-1989 Addenda Z21.35a-1993 VALVES, RELIEF AND A U T O M A T I C GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS THERMOSTATS, GAS APPLIANCE CONNECTORS, METAL, FOR GAS APPLIANCES PILOT GAS FILTERS ANSI Z21.11.2-1992 ROOM HEATERS, GAS-FIRED, Volume II, Unvented Room Heaters ANSI Z21.13-1991 Addenda Z21.13a-1993 Addenda Z21.13b-1994 ANSI Z21.15-1992 ANSI Z21.17-1991 Addenda Z21.17a-1993 Addenda Z21.17b-1993 BOILERS, GAS-FIRED LOW- PRESSURE STEAM AND HOT WATER VALVES FOR APPLIANCES, APPLIANCE CONNECTOR VALVES AND HOSE VALVES, MANUALLY OPERATED GAS CONVERSION BURNERS, DOMESTIC GAS ANSI Z21.40.1-1981 Addenda Z21.40.1a-1982 ANSI Z21.41-1989 Addenda Z21.41a-1990 Addenda Z21.41b-1992 ANSI Z21.42-1971 Addenda Z21.42a-1973 Addenda Z21.42b-1981 ANSI Z21.44-1991 AIR CONDITIONING APPLIANCES, G A S - F I R E D ABSORPTION SUMMER QUICK-DISCONNECT DEVICES FOR USE WITH GAS FUEL ILLUMINATING APPLIANCES, GAS-FIRED WALL FURNACES, GAS- FIRED GRAVITY AND 277

Chapter 17, Part II UNIFORM MECHANICAL CODE Addenda Z21.44a-1992 ANSI Z21.45-1992 ANSI Z21.48-1992 FAN-TYPE DIRECT-VENT FLEXIBLE CONNECTORS OF OTHER THAN ALL- METAL CONSTRUCTION FOR GAS APPLIANCES FLOOR FURNACE, GAS- FIRED GRAVITY AND FAN TYPE ANSI Z21.70-1981 ANSI Z21.71-1993 ANSI Z21.83-1998 EARTHQUAKE ACTUATED AUTOMATIC GAS SHUTOFF SYSTEMS AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION STANDARD FOR FUEL CELL POWER PLANTS ANSI Z21.49-1992 ANSI Z21.50-1989 Addenda Z21.50a-1990 Addenda Z21.50b-1990 ANSI Z21.54-1987 Addenda Z21.54a-1992 ANSI Z21.56-1998 Addenda Z21.56a-1993 Addenda Z21.56b-1994 ANSI Z21.58-1993 ANSI Z21.60-1991 ANSI Z21.61-1983 WALL FURNACES, GAS- FIRED GRAVITY AND FAN- TYPE VENTED DECORATIVE GAS APPLIANCES, VENTED GAS HOSE CONNECTORS FOR PORTABLE OUTDOOR GAS-FIRED APPLIANCES SWIMMING POOL HEATERS, GAS-FIRED OUTDOOR COOKING GAS APPLIANCES DECORATIVE GAS APPLIANCES FOR I N S T A L L A T I O N IN SOLID- FUEL BURNING FIREPLACES TOILETS, GAS-FIRED (Reaffirmed 1989) ANSI Z83.3-1971 BOILERS, GAS UTILIZATION EQUIPMENT IN LARGE BOILERS Addenda Z83.3a-1972 Addenda Z83.3b-1976 (Reaffirmed 1983, 1989) ANSI Z83.6-1990 INFRARED HEATERS, GAS- FIRED Addenda Z83.6a-1992 Addenda Z83.6b-1993 ANSI Z83.7-1990 GAS-FIRED CONSTRUCTION HEATERS Addenda Z83.7a-1991 Addenda Z83.7b-1993 ANSI Z83.8-1990 UNIT HEATERS, GAS Addenda Z83.8a-1990 Addenda Z83.8b-1992 ANSI Z83.9-1990 DUCT FURNACES, GAS-FIRED Addenda Z83.9a-1992 ANSI Z83.11-1989 RANGES AND UNIT BROILERS, FOOD SERVICE EQUIPMENT, GAS Addenda Z83.11a-1990 Addenda Z83.11b-1991 ANSI Z21.66-1994 ANSI Z21.69-1997 CSA 6.16-M97 VENT DAMPER DEVICES FOR USE WITH GAS-FIRED APPLIANCES, AUTOMATIC CONNECTORS FOR MOVABLE GAS APPLIANCES ANSI Z83.12-1989 FOOD SERVICE EQUIPMENT BAKING AND ROASTING OVENS, GAS Addenda Z83.12a-1990 Addenda Z83.12b-1991 ANSI Z83.13-1989 DEEP FAT FRYERS, FOOD SERVICE EQUIPMENT, GAS 278

STANDARDS Chapter 17, Part II Addenda Z83.13a-1990 Addenda Z83.13b-1991 ANSI Z83.14-1989 Addenda Z83.14a-1990 Addenda Z83.14b-1991 ANSI Z83.15-1989 Addenda Z83.15a-1990 Addenda Z83.15b-1991 COUNTER APPLIANCES, FOOD SERVICE EQUIPMENT, GAS KETTLES, STEAM COOKERS AND STEAM GENERATORS, FOOD SERVICE EQUIPMENT, GAS 15-2001 REFRIGERATION, SAFETY CODE FOR ANSI/ASHRAE 34-2001, i n c l u d i n g REFRIGERANT DESIGNATION Addendum A ASHRAE 62-2002 ASME AND SAFETY CLASSIFICATION VENTILATION FOR ACCEPT- ABLE INDOOR AIR QUALITY American Society of Mechanical Engineers, United Engineering Center 345 E. 47th St. New York, NY 10017 212-705-7722 www.asme.org ANSI Z83.18-1990 Addenda Z83.18a-1991 ARI ARI 700-99 DIRECT GAS-FIRED INDUSTRIAL AIR HEATERS Air Conditioning and Refrigeration Institute 4100 North Fairfax Dr., Suite 200 Arlington, VA 22203 7 0 3-5 2 4-8 8 0 0 REFRIGERANT SPECIFICATIONS ANSI/ ASME B16.33-90 ASTM MANUALLY OPERATED METALLIC GAS VALVES (LINE TYPE) FOR USE IN GAS PIPING SYSTEMS UP TO 125 PSIG (SIZES 1/2 THROUGH 2) American Society for Testing and Materials 100 Barr Harbor Drive West Conshohocken, PA 19428-2959 610-832-9500 www.astm.org ASHRAE American Society of Heating, Refrigerating, and Air- Conditioning Engineers, Inc. ASTM B 32, 1996 ASTM B 813, 1993 SOLDERS SOLDERING FLUXES 1791 Tullie Circle NE Atlanta, GA 30329-2305 404-636-8400 www.ashrae.org ASTM B 828, 1992 SOLDERING PROCEDURE FOR CAPILLARY SPACE JOINTS IN COPPER AND COPPER ALLOY TUBE AND FITTINGS ASHRAE CLIMATIC CONDITIONS FOR THE UNITED STATES, HANDBOOK FUNDAMENTALS CHAPTER 24, ASTM C 518, 1998 STEADY-STATE THERMAL TRANSMISSION PROPERTIES BY MEANS OF THE HEAT FLOW METER APPARATUS TABLE 1, COLUMN 6, 1989 ANSI/ FUEL OIL ASTM D 396-1997 ANSI/ASHRAE MECHANICAL 279

Chapter 17, Part II UNIFORM MECHANICAL CODE ASTM E 84-01 ASTM F 1281-01a ASTM F 1961-1999 SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS CROSS-LINKED P O L Y E T H Y L E N E / ALUMINUM/CROSS-LINKED POLYETHYLENE (PEX-AL- PEX) PRESSURE PIPE METAL COLD FLARE COMPRESSION FITTINGS WITH DISK SPRINGS FOR CROSS-LINKED POLYETHYLENE (PEX) TUBING NFPA 31-2001 NFPA 54-2002/ ANSI Z223.1 NFPA 58-2002 NFPA 69-1997 NFPA 70-2002 STANDARD FOR I N S T A L L A T I O N OF OIL- BURNING EQUIPMENT NATIONAL FUEL GAS CODE LIQUEFIED PETROLEUM GAS CODE STANDARD ON EXPLOSION PREVENTION SYSTEMS NATIONAL ELECTRICAL CODE IAPMO IAPMO IS 13-1991 IAPMO PS 14-1999 International Association of Plumbing and Mechanical Officials 5001 E. Philadelphia St. Ontario, CA 91761-2816 909-472-4100 www.iapmo.org PROTECTIVELY COATED PIPE (INSTALLATION) FLEXIBLE METALLIC WATER CONNECTORS NFPA 96-1998 NFPA 211-2000 NFPA 255-2000 VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS STANDARD FOR CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL BURNING APPLIANCES STANDARD METHOD OF TEST OF SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS IAPMO PS 120-2000 FLASHING AND STAND COMBINATION FOR AIR CONDITIONING UNITS (UNIT CURB) NFPA 262-1999 STANDARD METHOD OF TEST FOR FLAME TRAVEL AND SMOKE OF WIRES AND CABLES FOR USE IN AIR- HANDLING SPACES I-B-R Institute of Boiler and Radiator Manufacturers 393 Seventh Avenue New York, NY 10001 I-B-R Testing and BOILERS, LOW-PRESSURE Rating Code, Seventh CAST-IRON HEATING Edition, January, 1966 NFPA NFPA 30-2000 NFPA International 1 Batterymarch Park Quincy, MA 02169 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE NFPA 654-2000 NFPA 853-2000 SBI STANDARD FOR PREVENTION OF FIRE AND DUST EXPLOSION FROM THE M A N U F A C T U R I N G, P R O C E S S I N G,AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS STANDARD FOR THE INSTALLATION OF STATIONARY FUEL CELL POWER PLANTS Steel Boiler Institute 393 Seventh Avenue, New York, NY 10001 280

STANDARDS Chapter 17, Part II SBI Testing and SMACNA SMACNA, 1995 BOILERS, STEEL Rating Code Tenth Edition, September, 1965 Sheet Metal and Air C o n d i t i o n i n g Contractors National Association 4021 Lafayette Center Road Chantilly, VA 22021 HVAC DUCT CONSTRUCTION STANDARDS METAL AND FLEXIBLE, Addendum 1, November 1997 ANSI/UL 125, 2001 ANSI/UL 127, 1998 UL 132, 1997 VALVES FOR ANHYDROUS AMMONIA AND LP-GAS (OTHER THAN SAFETY RELIEF) FACTORY-BUILT FIREPLACES SAFETY RELIEF VALVES FOR ANHYDROUS AMMONIA AND LP-GAS SMACNA, 1992 UL FIBROUS GLASS DUCT CONSTRUCTION STANDARD Underwriters Laboratories Inc. 333 Pfingsten Road Northbrook, IL 60062 847-272-8800 www.ul.com ANSI/UL 144, 2001 ANSI/UL 174, 1996 ANSI/UL 180, 1997 REGULATORS, LP-GAS HOUSEHOLD ELECTRIC STORAGE TANK WATER HEATERS LIQUID LEVEL INDICATING GAUGES FOR OIL BURNER FUELS ANSI/UL 17, 1995 ANSI/UL 21, 1996 VENT OR CHIMNEY CONNECTOR DAMPERS FOR OIL-FIRED APPLIANCES LP-GAS HOSE UL 181, 1996 FACTORY-MADE AIR DUCTS AND CONNECTORS ANSI/UL 33, 2001 HEAT RESPONSIVE LINKS FOR FIRE PROTECTION SERVICE UL 181A, 1994 CLOSURE SYSTEMS FOR USE WITH RIGID AIR DUCTS AND AIR CONNECTORS ANSI/UL 51, 1999 POWER-OPERATED PUMPS FOR ANHYDROUS AMMONIA AND LP-GAS UL 181B, 1995 CLOSURE SYSTEMS FOR USE WITH FLEXIBLE AIR DUCTS AND AIR CONNECTORS ANSI/UL 80, 2000 ANSI/UL 103, 2001 STEEL TANKS FOR OIL-BURNER FUEL FACTORY-BUILT CHIMNEYS FOR RESIDENTIAL TYPE AND BUILDING HEATING A P P L I A N C E ANSI/UL 197, 1993 ANSI/UL 207, 2001 COMMERCIAL ELECTRIC COOKING APPLIANCES REFRIGERANT- CONTAINING COMPONENTS AND 281

Chapter 17, Part II UNIFORM MECHANICAL CODE ACCESSORIES, NON- E L E C T R I C A L ANSI/UL 443, 1996 STEEL AUXILIARY TANKS FOR OIL- BURNER FUEL ANSI/UL 252, 1996 ANSI/UL 268A, 1998 COMPRESSED GAS R E G U L A T O R S SMOKE DETECTORS FOR DUCT APPLICATION ANSI/UL 471, 1996 ANSI/UL 525, 1995 COMMERCIAL R E F R I G E R A T O R S AND FREEZERS FLAME ARRESTERS ANSI/UL 296, 1998 UL 300, 1996 OIL BURNERS FIRE TESTING OF FIRE EXTINGUISHING SYSTEMS FOR PROTECTION OF RESTAURANT COOKING AREAS ANSI/UL 536, 2000 UL 555, 1999 UL 555C, 1996 ANSI/UL 555S, 2001 FLEXIBLE METALLIC HOSE FIRE DAMPERS CEILING DAMPERS SMOKE DAMPERS ANSI/UL 343, 1998 PUMPS FOR OIL- BURNING APPLIANCES UL 565, 1998 LIQUID LEVEL GAUGES AND INDICATORS FOR ANHYDROUS AMMONIA AND LP-GAS ANSI/UL 352, 1997 CONSTANT-LEVEL OIL V A L V E S ANSI/UL 569, 2000 PIGTAILS AND FLEXIBLE HOSE CONNECTORS FOR LP-GAS ANSI/UL 353, 1995 UL 378, 1993 LIMIT CONTROLS DRAFT EQUIPMENT ANSI/UL 641, 1995 TYPE L LOW TEMPERATURE VENTING SYSTEMS ANSI/UL 391, 1995 ANSI/UL 404, 1997 ANSI/UL 412, 2001 FURNACES, SOLID-FUEL AND COMBINATION FUEL CENTRAL AND SUPPLEMENTARY GAUGES, INDICATING PRESSURE, FOR COMPRESSED GAS SERVICE UNIT COOLERS, REFRIGERATION ANSI/UL 710, 1995 ANSI/UL 723., 1996 UL 726, 1995 UL 727, 1994 EXHAUST HOODS FOR COMMERCIAL COOKING EQUIPMENT TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS OIL-FIRED BOILER A S S E M B L I E S OIL-FIRED CENTRAL F U R N A C E S ANSI/UL 429, 1999 VALVES, ELECTRICALLY OPERATED, ANSI/UL 729, 1995 OIL-FIRED FLOOR FURNACES ANSI/UL 441, 1999 GAS VENTS ANSI/UL 730, 1995 OIL-FIRED WALL FURNACES 282

STANDARDS Chapter 17, Part II ANSI/UL 731, 1995 UL 732, 1997 UL 733, 1993 ANSI/UL 737, 1996 UL 791, 1993 UL 795, 1999 ANSI/UL 834, 1998 ANSI/UL 842, 1999 OIL-FIRED UNIT HEATERS OIL-FIRED STORAGE TANK WATER HEATERS OIL-FIRED AIR HEATERS AND DIRECT-FIRED HEATERS FIREPLACE STOVES INCINERATORS, RESIDENTIAL COMMERCIAL-INDUSTRIAL GAS HEATING EQUIPMENT (Inputs over 400,000 Btu per hour) HEATING, WATER SUPPLY, AND POWER BOILERS E L E C T R I C VALVES FOR FLAMMABLE FLUIDS UL 1046, 2000 UL 1206, 1994 UL 1240, 1994 UL 1453, 1995 SERVING APPLIANCES GREASE FILTERS FOR EXHAUST DUCTS, ELECTRIC COMMERCIAL CLOTHES-WASHING EQUIPMENT ELECTRIC COMMERCIAL CLOTHES-DRYING EQUIPMENT ELECTRIC BOOSTER AND COMMERCIAL STORAGE TANK WATER HEATER ANSI/UL 1482, 1998 SOLID-FUEL TYPE UL 1738, 2000 ROOM HEATERS VENTING SYSTEMS FOR GAS-BURNING APPLIANCES, CATEGORIES II, III, AND IV ANSI/UL 858, 2001 HOUSEHOLD ELECTRIC ANSI/UL 867, 2000 RANGES ELECTROSTATIC AIR C L E A N E R S UL 1746, 1993 ANSI/UL 1777, 1996 EXTERNAL CORROSION PROTECTION SYSTEMS FOR STEEL UNDERGROUND STORAGE TANKS CHIMNEY LINERS ANSI/UL 896, 1997 OIL-BURNING STOVES ANSI/UL 900, 1995 AIR FILTER UNITS UL 1812, 1995 DUCTED HEAT RECOVERY VENTILATORS ANSI/UL 907, 1995 FIREPLACE ACCESSORIES UL 1815, 2001 NONDUCTED HEAT UL 921, 1996 COMMERCIAL ELECTRIC RECOVERY VENTILATORS DISHWASHERS ANSI/UL 959, 2000 MEDIUM HEAT APPLIANCE FACTORY-BUILT CHIMNEYS UL 1820, 1997 FIRE TEST OF PNEUMATIC TUBING FOR FLAME AND SMOKE CHARACTERISTICS ANSI/UL 984, 1996 UL 1026, 1995 HERMETIC REFRIGERANT MOTOR COMPRESSORS ELECTRIC HOUSEHOLD COOKING AND FOOD UL 1887, 1996 FIRE TEST OF PLASTIC SPRINKLER PIPE FOR FLAME AND SMOKE C H A R A C T E R I S T I C S 283

Chapter 17, Part II UNIFORM MECHANICAL CODE UL 1963, 1995 UL 1978, 2002 REFRIGERANT RECOVERY/ RECYCLING EQUIPMENT GREASE DUCTS ANSI/UL 1995, 1995 HEATING AND COOLING EQUIPMENT UL 2021, 1997 UL 2043, 1996 FIXED AND LOCATION- DEDICATED ELECTRIC ROOM HEATERS FIRE TEST FOR HEAT AND VISIBLE SMOKE RELEASE FOR DISCRETE PRODUCTS AND THEIR ACCESSORIES INSTALLED IN AIR HANDLING SPACES ANSI/UL 2157, 1997 ELECTRIC CLOTHES WASHING MACHINES AND EXTRACTORS UL 2158, 1997 ELECTRIC CLOTHES DRYERS 284

STANDARDS Chapter 17, Part II CHAPTER 17 STANDARDS TABLE 17-1 Standards for Equipment and Materials Standard Number ACCA Manual D Residential Duct Systems Standard Title [UMC References] ACCA Manual J Residential Load Calculations ACCA Manual N Commercial Load Calculation for Commercial Summer and Winter Air Conditioning ACCA Manual Q Commercial Low Pressure Low Velocity Duct Systems Design ANSI A13.1-81(R93) 96 ANSI A21.10-98 03 ANSI A21.51-96 02 ANSI B2.1-1990 B1.20.1-1983 (R2001) Scheme for the Identification of Piping Systems Ductile-Iron and Gray-Iron Fittings, 3 in. through 48 in. (75 mm through 1200 mm), for Water and Other Liquids (same as AWWA C110) Ductile-Iron Pipe, Centrifugally Cast, for Water (same as AWWA C151) General Purpose (Inch) Pipe Threads Pipe Threads (Except Dryseal) (replaced by ASME B1.20.1-98) ANSI B2.2-1968 B1.20.3-1976 (R2003) Dryseal Pipe Threads (Inch) ANSIASME B31.5-1992 2001 Refrigeration Piping, Including Valves, Fittings and Welding ANSI Z21.1-1993 2000 Addendum Z21.1a-2003 Household Gas Cooking Appliances ANSI Z21.2-1992 Gas Hose Connectors for Portable Indoor Gas-Fired Appliances ANSI Z21.5.1-1992 2002 ANSI Z21.5.1a-2003 Addenda Z21.5.1a-2002 Gas Clothes Dryers - Volume I, Type I ANSI Z21.5.2-1987 2001 Gas Clothes Dryers - Volume II, Type 2 CSA 7.2-2001 285

Chapter 17, Part II UNIFORM MECHANICAL CODE Standard Number Standard Title [UMC References] ANSI Z21.5.2a-2003 Addenda Z21.5.2a-1990 2003 Addenda Z21.5.2b-1992 ANSI Z21.8-1994 (R2002) Installation of Domestic Gas Conversion Burners [UMC 906.0] ANSI Z21.10.1-1990 2004 CSA 4.1a02 Gas Water Heaters, Volume I, Storage Water Heaters with Input Ratings of 75,000 Btu per Hour or Less ANSI Z21.10.3-1990 2004 Gas Water Heaters, Volume III, Water Heaters with Input Ratings Above 75,000 Btu per Hour, Circulating and Instantaneous Water Heaters ANSI Z21.11.1-1991 Gas Fired Room Heaters, Volume I, Vented Room Heaters ANSI Z21.11.2-1992 2002 Addenda Z21.11.2a-2003 Gas Fired Unvented Room Heaters, Volume II, Unvented Room Heaters ANSI Z21.12-1990 (R2000) Addenda Z21.12a-1993 (R2000) Addenda Z21.12b-1994 (R2000) Draft Hoods ANSI Z21.13-1991 2004 CSA 4.9a02 Gas-Fired Low Pressure Steam and Hot Water Boilers ANSI Z21.15-1992 1997 (R2003) Addenda Z21.15a-2001 (R2003) Valves for Appliances, Appliance Connector Valves and Hose E n d Valves, Manually Operated Gas Valves ANSI Z21.17-1991 1998 CSA 2.7-M98 Addenda Z21.17a-1993 Addenda Z21.17b-1993 Installation of Domestic Gas Conversion Burners ANSI Z21.18-1993 2000 Addenda Z21.18a-2001 Gas Appliance Pressure Regulators ANSI Z21.19-1983 2002 Refrigerators Using Gas Fuel ANSI Z21.20-1993 2000 Addenda Z21.20a-2000 Addenda Z21.20b-2001 Automatic Gas Ignition Systems and Compoonents ANSI Z21.21-1993 2000 Addenda Z21.21a-2001 Automatic Valves for Gas Appliances 286

STANDARDS Chapter 17, Part II Standard Number ANSI Z21.22-1986 1999 (R2003) CSA 4.4-00 Addenda Z21.22a-1990 2000 Addenda Z21.22b-2001 Standard Title (UMC References) Relief Valves and Automatic Gas Shotoff Devices for Hot Water Supply Systems ANSI Z21.23-1989 2000 Addenda Z21.23a-1991 2003 Addenda Z21.23b-1993 Gas Appliance Thermostats ANSI Z21.24-1993 2001 Metal Connectors for Gas Appliances [UMC 1312.1(3)] Addenda Z21.24a-2002 Addenda Z21.24b-2003 ANSI Z21.35-1989 1995 (R2002) Pilot Gas Filters Addenda Z21.35a-1993 1997 (R2002) Addenda Z21.35b-2000 (R2002) ANSI Z21.40.1-1981 1996 (R2002) Gas-Fired, Heat Activated Absorption Summer, Air Conditioning and Heat Pump CSA 2.9.1-M96 Appliances Addenda Z21.40.1a-1982 ANSI Z21.41-1989 2003 Addenda Z21.41a-1990 Addenda Z21.41b-1992 Quick-Disconnect Devices for Use with Fuel Gas ANSI Z21.42-1971 1997 (R2002) Addenda Z21.42a-1973 Addenda Z21.42b-1981 Gas-Fired Illuminating Appliances ANSI Z21.44-1991 Addenda Z21.44a-1992 Gas-Fired Gravity and Fan Type Direct vent Wall Furnaces ANSI Z21.45-1992 1995 Flexible Connectors for of Other Than All-Metal Construction for Gas Appliances ANSI Z21.47-1993 2003/ CSA 2.3-2003 Gas-Fired Central Furnaces ANSI Z21.48-1992 ANSI Z21.49-1992 Gas-Fired Gravity and Fan Type Floor Furnaces Wall Furnaces, Gas-FiredGravity and Fan Type Vented ANSI Z21.50-1989 2003 Addenda Z21.50a-19902003 Decorative Gas Appliances, Vented 287

Chapter 17, Part II UNIFORM MECHANICAL CODE Standard Number Standard Title [UMC References] Addenda Z21.50b-19912002 ANSI Z21.54-1987 2002 Addenda Z21.54a-1992 Gas Hose Conectors for Portable Outdoor Gas-Fired Appliances ANSI Z21.56-1998 2001 Addenda Z21.56a-1993 2003 Addenda Z21.56b-1994 Gas-Fired Swimming Pool Heaters ANSI Z21.58a-1993 2004 Outdoor Gas Cooking Appliances ANSI Z21.60-1991 2003 Addenda Z21.60a-2003 Decorative Gas Appliances for Installation in Solid-Fuel Burning Fireplaces ANSI Z21.61-1983 (R2004) Gas-Fired Toilets ANSI Z21.66-1994 1996 (R2001) Automatic Vent Damper Devices for Use with Gas-Fired Appliances ANSI Z21.69-1997 2002 Connectors for Moveable Gas Appliances [UMC 303.1(5), 1312.1(6)] CSA 6.16-M9702 Addenda Z21.69a-2003/ CGA 6.16a Addenda Z21.69b-2001/ CGA 6.16b ANSI Z21.71-1993 (R2002) Automatic Intermittent Ignition Systems for Field Installation ANSI Z21.80-1997 2003 CSA 6.22-M97 Line Pressure Regulators [UMC 1309.7.2, 1309.9.7.5(A)] ANSI Z21.83-1998 Fuel Cell Power Plants [UMC 1601.0] ANSI Z21.86-1992 2003 Floor Furnace, Gas-Fired Gravity and Fan Type Gas-Fired Vented Heating Appliances ANSI Z21.88-2002 Addenda Z21.88a-2003 Vented Gas Fireplace Heaters ANSI Z83.3-1971 Gas Utilization Equipment in Large Boilers Addenda Z83.3a-1972 Addenda Z83.3b-1976 (Reaffirmed 1983, 1989) ANSI Z83.4-1991 1999 Non-Recirculating Direct Gas-Fired Makeup Industrial Air Heaters [UMC 909.1] CSA 3.7-M99 Addenda Z83.4a1992 2001 288

STANDARDS Chapter 17, Part II Standard Number Standard Title (UMC References) CSA 3.7a-2001 ANSI Z83.6-1990 Addenda Z83.6a-1992 Addenda Z83.6b-1993 Gas-Fired Infrared Heaters ANSI Z83.7-1990 2000 Addenda Z83.7a-1991 Addenda Z83.7b-1993 Gas-Fired Construction Heaters ANSI Z83.8-1990 2002 CSA 2.6-2002 Addenda Z83.8a-1992 2003 Addenda Z83.8b-1992 Gas Unit Heaters and Gas-Fired Duct Furnaces ANSI Z83.9-1990 Addenda Z83.9a-1992 Gas-Fired Duct Furncaes ANSI Z83.11-1989 2002 Addenda Z83.11a-1990 Addenda Z83.11b-1991 Ranges and Unit Broilers Gas Food Service Equipment ANSI Z83.12-1989 Addenda Z83.12a-1990 Addenda Z83.12b-1991 Gas Food Service Equipment, Baking and Roasting Oven ANSI Z83.13-1989 Addenda Z83.13a-1990 Addenda Z83.13b-1991 Gas Food Service Equipment, Deep Fat Fryers ANSI Z83.14-1989 Addenda Z83.14a-1990 Addenda Z83.14b-1991 Gas Food Service Equipment, Counter Appliances ANSI Z83.15-1989 Addenda Z83.15a-1990 Addenda Z83.15b-1991 Gas Food Service Equipment, Kettles, Steam Cookers and Steam Generators ANSI Z83.18-1990 2000 Recirculating Gas-Fired, Direct Gas-Fired Industrial Air Heaters [UMC 910.1] Addenda Z83.18a-1991 2001 Addenda Z83.18b-1992 2003 ANSI Z83.19a-2002 Gas-Fired High Intensity Infrared Heaters ANSI Z83.20-2001 Gas-Fired Tube Type and Low Intensity Infrared Heaters 289

Chapter 17, Part II UNIFORM MECHANICAL CODE Standard Number Standard Title [UMC References] Addenda Z83.20a-2002 Addenda Z83.20b-2004 ANSI Z223.1-99 National Fuel Gas Code (same as NFPA 54) Fuel Gas ARI 700-99 Specification for Fluorocarbon Refrigerant ARI 1010-2002 Drinking Fountains and Self-Contained, Mechanically Refrigerated Drinking Water Coolers ASCE 25-1999 Earthquake Actuated Automatic Gas Shutoff Devices ASHRAE Handbook Fundamentals, Climatic Conditions for the United States; Chapter 24 27, Table 1A and B, Column 6, 1989 2001 ASHRAE Volume 1980 Panel Heating Systems ANSI/ASHRAE 15-1994 2004 Safety Code Standard for Mechanical Refrigeration Systems ANSI/ASHRAE 34-2000 2004 including Addendum 1 Refrigerant Designation and Safety Classification of Refrigerants ASHRAE 62.1-2002 2004 Ventilation for Acceptable Indoor Air Quality, Addenda h,i,k,n,o,r,t,u,v,x,z,ab,ad,ae,and,af [UMC 403.4.2] ASHRAE Climatic Conditions ASHRAE Handbook - Fundamentals, Chapter 24 27, Table 1A&B, Column 6 for the US 1989 2001 ASME A112.4.1-93 (R02) Water Heater Relief Valve Drain Tubes ASME A112.18.6-1999 2003 Flexible Water Connectors ASME A112.20.1-2004 ASME B1.20.1-8398 (R92) ASME B1.20.3-76 (R2003) (R82/91/98) Qualification of Instsllers of High Purity Piping Systems Pipe Threads, General Purpose, Inch [UMC 1309.5.7(A)] Dryseal Pipe Threads, Inch Joints ASME B16.1-89 1998 Cast-Iron Pipe Flanges and Flanged Fittings, Classes 25, 125, 250, and 800 Piping, Ferrous [UMC 1309.5.10] ASME B16.18-2001 Cast Copper Alloy Solder Joint Pressure Fittings 290

STANDARDS Chapter 17, Part II Standard Number ASME B16.22-2001 Standard Title (UMC References) Wrought Copper and Copper Alloy Solder Joint Pressure Fittings ASME B16.23-2002 Cast Copper Alloy Solder Joint Drainage Fittings ASME B16.24-2001 Cast Copper Alloy Pipe Flanged Fittings ASME B16.26-1988 Cast Copper Alloy Fittings for Flared Copper Tubes ASME B16.29-2001 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings ANSI/ASME B16.33-90 2002 ASME B16.38-85 (R1994) Manually Operated Metallic Gas Valves (Line Type) for Use in Gas Piping Systems up to 125 psig (Sizes 1/2 NPS through - 2) Large Metallic Valves for Gas Distribution (Manually Operated, NPS 2-1/2 to 12, 125 psig Maximum) ASME B16.50-2001 Wrought Copper and Wrought Copper Alloy Braze-Joint Pressure Fittings ASME B36.10M-2000 2001 Welded and Seamless Wrought Steel Pipe [UMC 1309.5.2.2] ASME Section IV Rules for Construction of Heating Boilers ASME Section VIII Rules for Construction of Pressure Vessels ASSE 1005-1999 Water Heater Drain Valves ASTM A 53-2001 2002 ASTM A 312-2001a 2003 Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded, and Seamless [UMC 1309.5.2.2(2)] Seamless and Welded Austenitic Stainless Steel Pipes ASTM A 653M-2001a 2003 Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process ASTM A 733-2001 2003 Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples ASTM A 861-2001a 2002 High-Silicon Iron Pipe and Fittings (Note 1) ASTM B 32-1996 2004 Solders Metal (see Section 1201.2.3.7 for restriction) ASTM B 42-2002 e1 Seamless Copper Pipe, Standard Sizes ASTM B 43-1998 e1 Seamless Red Brass Pipe, Standard Sizes 291

Chapter 17, Part II UNIFORM MECHANICAL CODE Standard Number ASTM B 75-2002 Seamless Copper Tube Standard Title [UMC References] ASTM B 88-2003 Seamless Copper Water Tube, (K, L, M) [UMC 1309.5.3.2] ASTM B 135-2002 Seamless Brass Tube ASTM B 280-2003 Seamless Copper Tube for Air Conditioning and Refrigeration Field Service [UMC 1309.5.3.2] ASTM B 302-2002 ASTM B 306-2002 Threadless Copper Pipe (TP) Copper Drainage Tube (DWV) ASTM B 370-1998 Copper Sheet and Strip for Building Construction ASTM B 447-2002 Welded Copper Tube ASTM B 584-2000 Copper Alloy Sand Casting for General Applications (Note 5) ASTM B 587-1997 (R2003) Welded Brass Tube ASTM B 687-1999 Brass, Copper, and Chromium-Plated Pipe Nipples ASTM B 813-1993 00 e1 Liquid and Paste Soldering Fluxes for Soldering of Copper and Copper Alloy Tube ASTM B 828-1992 02 Standard Practice for Making Soldering Procedure for Capillary Space Joints in Copper and Copper Alloy Tube and Fittings ASTM C 411-1997 Hot-Surface Performance of High Temperature Thermal Insulation [UMC 605.0, 1201.4.1.3] ASTM C 518-1998 2004 Steady-State Thermal Transmission Properties bymeans of the Heat Flow Meter Apparatus ANSI/ASTM D 396-1997 Fuel Oil ASTM E 84-01 2004 Surface Burning Characterisitcs of Building Materials [UMC 602.2, 605.0, 1201.4.1.3] ASTM E 814-2002 Fire Tests of Through Penetration Fire Stops ASTM E 2231-2002 Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics [UMC 605.0, 1201.4.1.3] ASTM F 1281-01a 03 Crosslinked Polyethylene/ Aluminum/ Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe [UMC 1201.5, 1201.5.1.1, 1201.5.2] 292

STANDARDS Chapter 17, Part II Standard Number Standard Title (UMC References) ASTM F 1961-1999 02a Metal Mechanical Cold Flare Compression Fittings with Disc Springs for Crosslinked Ployethylene (PEX) Tubing ASTM F 2158-2001 Residential Central-Vacuum Tube and Fittings AWS A5.8-92 AWWA C110-2003 Filler Metals for Brazing and Braze Welding Ductile-Iron and Gray-Iron Fittings, 3 in. through 48 in. (75 mm through 1200 mm), for Water and Other Liquids (same as ANSI A21.10-98) AWWA C151-2002 AWWA C203-2002 AWWA C500-2002 Ductile-Iron Pipe, Centrifugally Cast, for Water (same as ANSI A21.51-91) Coal-Tar Protective Coatings and Linings for Steel Water Pipelines Enameled and Tape Hot Applied Gate Valves for Water and Sewerage Systems Valves CAN/CGSB 3.2-99 3 GP-28 Fuel Oil, Canadian Government Specification Board, Heating Fuel Oil CSA F379.1-88 Solar Domestic Hot Water Systems (Liquid to Liquid Heat Transfer) IAPMO IS 13-1991 2003 Installation Standard for Protectively Coated Pipe IAPMO PS 14-2001 2002 Flexible Metallic Field Fabricated Water Connectors IAPMO PS 33-2000a Flexible PVC Hose for Pools, Hot Tubs, Spas and Jetted Bathtubs IAPMO PS 120-20002004 Flashing and Stand Combination for Air Conditioning Units (Residential or Commercial Unit Curb) IAS 1-91 U.S. Requirements for Indirect Water Heaters for Use With External Heat Source IAS LC 1-01 CSA 6.26-01 [UMC 1309.5.3.4] Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing (CSST) Fuel Gas I-B-R Testing and Rating Code, Seventh First Edition August, 2002 Rating Procedure for Heating Boilers, Low Pressure Cast Iron Heating ISO Guide 65:1996 General Requirements for Bodies Operating Product Certification Systems MSS SP-58-02 Pipe Hangers and Supports Materials, Design, and Manufacture [UMC 1311.2.6(A)] MSS SP-67-02 Butterfly Valves 293

Chapter 17, Part II UNIFORM MECHANICAL CODE Standard Number MSS SP-69-02 Standard Title [UMC References] Pipe Hangars and Supports - Selection and Application MSS SP-73-03 MSS SP-80-03 MSS SP-89-98 MSS SP-104-03 Brazing Joints for Wrought and Cast Copper Alloy Solder Joint Pressure Fittings Bronze Gate-Globe, Angle, and Check Valves Pipe Hangars and Supports - Fabrication and Installation Practices Wrought Copper Solder Joint Pressure Fittings MSS SP-106-03 Cast Copper Allot Flanges and Flanged Fittings, Class 125, 150, and 300 MSS SP-109-97 NFPA 211-2003 Welded Fabricated Copper Solder Joint Pressure Fittings Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances NFPA 30-2000 2003 Flammable and Combustible Liquids Code [UMC 204.0] NFPA 31-2001 2006 Standard for Installation of Oil Burning Equipment [UMC 302.3, 1020.0, 1302.0] NFPA 52-1992 2005 Compressed Natural Gas (CNG) Vehicular Fuel Systems NFPA 54-2002 2005/ANSI Z223.1 National Fuel Gas Code [UMC 303.3(D), 516.2.1, 1309.7.5(D), 1311.4, 1311.4.1] NFPA 58-2002 2004 Liquefied Petroleum Gas Code [UMC 516.2.1, 1309.5.4.3, 1309.5.9(D), 1313.0] NFPA 69-1997 2002 Standard on Explosion Prevention Systems NFPA 70-2002 2005 National Electrical Code [UMC 511.1.6, 512.2.5, 516.2.5, 516.2.7(D), 602.2(5), 1311.12.5(B)] NFPA 85-2004 Boiler and Combustion Systems Hazard Code [UMC 1002.0(9), 1020.0] NFPA 96-1998 2004 Ventilation Control and Fire Protection of Commercial Cooking Operations NFPA 211-2000 2003 Standard for Chimneys, Fireplaces, Vents, and Solid Fuel Burning Appliances [UMC 517.7.1, 517.7.2, 517.7.3, 801.1, 801.2, 802.5.1.2, 802.5.1.3, 802.5.4] NFPA 255-2000 2005 Standard Method of Test of Burning Characteristics of Building Materials [UMC 602.2, 605.0, 1201.4.1.3] NFPA 262-1999 2006 Standard Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air- Handling Spaces [UMC 602.2(5)] NFPA 654-2000 2005 Standard for Prevention of Fire and Dust Explosion from the Manufacturing, Processing, and Handling of Combustible Particulate Solids [UMC 506.4] 294

STANDARDS Chapter 17, Part II Standard Number Standard Title (UMC References) NFPA 853-2000 2006 Standard for the Installation of Stationary Fuel Cell Power Plants [UMC 1601.0] PPI TR-4, August, 1978 2004 Recommended Hydrostatic Strengths and Design Stresses for Thermoplastic Pipe and Fittings Compounds SAE J512-97 Automotive Tube Fittings SBI Tenth Edition, September 1965 SMACNA, 1995 Addendum 1, 11/97 Boilers, Steel, SBI Testing and Rating Code HVAC Duct Construction Standards - Metal and Flexible SMACNA 1884, 1992 2003 Fibrous Glass Duct Construction Standard ANSI/UL 17, 1995 1994 edition 3 Vent or Chimney Connector Dampers for Oil-Fired Appliances ANSI/UL 21, 1996 1995 edition 9 LP-Gas Hose ANSI/UL 33, 2001 2003 edition 7 Heat Responsive Links for Fire Protection Service ANSI/UL 51, 1999 2002 edition 9 Power-Operated Pumps for Anhydrous Ammonia and LP-Gas ANSI/UL 80, 2000 2004 edition 11 Steel Tanks for Oil-Burner Fuel ANSI/UL 103, 2001 edition 10 Factory-Built Chimneys for Residential Type and Building Heating Appliances ANSI/UL 125-2001 1997 edition 6 Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief) ANSI/UL 127-1998 1996 edition 7 Factory-Built Fireplaces UL 132, 1997 edition 6 Safety Relief Valves for Anhydrous Ammonia and LP-Gas ANSI/UL 144, 2001 1999 edition 7 LP-Gas Regulators ANSI/UL 174, 19962004 edition 11 Household Electric Storage Tank Water Heaters ANSI/UL 180-1997 2003 edition 7 Liquid Level Indicating Gauges for Oil Burner Fuels UL 181, 1996 edition 10 Factory-Made Air Ducts and Air Connectors UL 181A, 1994 edition 3 Closure Systems for Use with Rigid Air Ducts and Air Connectors UL 181B, 1995 edition 2 Closure Systems for Use with Flexible Air Ducts and Air Connectors 295

Chapter 17, Part II UNIFORM MECHANICAL CODE Standard Number Standard Title [UMC References] ANSI/UL 197, 1993 2003 edition 9 Commercial Electric Cooking Appliances [UMC 513.2.2] ANSI/UL 207, 2001 edition 7 Non-Electrical Refrigerant-Containing Components and Accessories ANSI/UL 252, 1996 2003 edition 8 Compressed Gas Regulators ANSI/UL 268A, 1998 edition 3 Smoke Detectors for Duct Application ANSI/UL 296, 1998 2003 edition 10 Oil Burners UL 300, 1996 edition 3 Fire Testing of Fire Extinguishing Systems for Protection of Restaurant Cooking Areas [UMC 513.2.2] ANSI/UL 343, 1998 1997 edition 8 Pumps for Oil-Burning Appliances ANSI/UL 352, 1997 edition 7 Constant-Level Oil Valves ANSI/UL 353, 1995 1994 edition 5 Limit Controls UL 378, 1993 edition 3 Draft Equipment ANSI/UL 391, 1995 edition 3 Solid-Fuel and Combination Fuel Central and Supplementary Furnaces ANSI/UL 404, 1997 edition 7 Indicating Pressure Gauges for Compressed Gas Service ANSI/UL 412, 2001 2004 edition 4 Refrigeration Unit Coolers ANSI/UL 429, 1999 edition 5 Electrically Operated Valves ANSI/UL 441, 1999 1996 edition 9 Gas Vents ANSI/UL 4423, 1996 1995 edition 5 Steel Auxilliary Tanks for Oil Burner Fuel ANSI/UL 447471, 1996 1995 edition 8 Commercial Refrigerators and Freezers ANSI/UL 525, 1995 2004 edition 7 Flame Arresters ANSI/UL 536, 2000 1997 edition 9 Flexible Metallic Hose ANSI/UL 555, 1999 edition 6 Fire Dampers UL 555C, 1996 edition 2 Ceiling Dampers 296

STANDARDS Chapter 17, Part II Standard Number Standard Title (UMC References) ANSI/UL 555S, 2001 1999 edition 4 Smoke Dampers UL 565, 1998 edition 5 Liquid level Gauges and Indicators for Anhydrous Ammonia and LP-Gas ANSI/UL 569, 2000 1995 edition 7 Pigtails and Flexible Hose Connectors for LP-Gas ANSI/UL 641, 1995 edition 7 Type L Low Temperature Venting Systems ANSI/UL 710, 1995 edition 5 Exhaust Hoods for Commercial Cooking Equipment ANSI/UL 723, 1996 2003 edition 9 Test for Surface Burning Characterisits of Building Materials [UMC 508.3, 602.2, 605.0(E), 1201.4.1.3] UL 726, 1995 edition 7 Oil-Fired Boiler Assemblies UL 727, 1994 edition 8 Oil-Fired Central Furnaces ANSI/UL 729, 1995 2003 edition 6 Oil-Fired Floor Furnaces ANSI/UL 730, 1995 2003 edition 5 Oil-Fired Wall Furnaces ANSI/UL 731, 1995 edition 5 Oil-Fired Heater Units ANSI/UL 732, 1997 1995 edition 5 Oil-Fired Storage Tank Water Heaters UL 733, 1993 edition 4 Oil-Fired Water Heaters and Direct-Fired Heaters ANSI/UL 737, 1996 edition 8 Fireplace Stoves UL 791, 1993 edition 4 Residential Incinerators UL 795, 1999 edition 5 Commercial-Industrial Gas Heating Equipment (Inputs over 400,000 Btu per hour) ANSI/UL 834, 1998 2004 edition 5 Electric Water Supply Heating and Power Boilers ANSI/UL 842, 1999 1997 edition 8 Valves for Flammable Fluids ANSI/UL 858, 2001 1993 edition 15 Household Electric Ranges ANSI/UL 867, 2000 edition 4 Electrostatic Air Cleaners ANSI/UL 896, 1997 1993 edition 5 Oil-Burning Stoves 297

2024 © homedocbox.com Privacy Policy | Terms of Service | Feedback