MELAG. Complete solutions for instrument decontamination Export-Pricelist 2017 MELAG. All. Products at a glance! Big autoclaves.

Complete solutions for instrument decontamination Export-Pricelist 2017 All MELAG Products at a glance! Big autoclaves Autoclaves Sealing devices and packagings Washer-disinfectors MELAtrace Software for documentation and traceability MELAstore wash trays and boxes MELAdem water treatment MELAdes Disinfectants MELAG

Innovation, Quality and Competence: The basis of the success of a family-led company As a german owner-run and operated family concern founded in 1951, we have a long history of successful specialization in hygiene products for practice-based use. Our focus on quality and the highest standards of operational reliability has established MELAG as the world s leading manufacturer in our area of core competence, practice hygiene, selling over 500,000 devices to date. Our entire product range is developed and produced exclusively in Germany (Berlin). Over 365 employees work on a c. 20,000 m 2 premises. Today we are easily the world s largest specialist manufacturer of practice sterilizers and washer-disinfectors concentrating exclusively on practice hygiene. We have consistently rejected outsourcing to low-wage third countries, as we did not want to risk a reduction in our world-beating quality. We have also ruled out emulating the trend towards expanding our product range to exceed provision in our area of core competence, practice hygiene. Focussing on providing cutting-edge innovation, we recruited an additional 35 extra development engineers in the last few years, extending our Product Development department to 80 members. Our Testing & Experiment department lays the foundation for our market-leading quality, as well as subjecting all purchase parts to the closest of scrutiny. Adding 18 new engineers to this departmentin just two years, it now comprises 40 members. Device software is responsible for the safe control of all our products and their problem-free integration in the practice network, thereby ensuring their safe, reliable and efficient functioning and the production of the legally-required documentation. In view of the importance of this sector, we have long maintained a separate Electronics and Software department staffed by 40 experts, this has produced an astounding R&D quota of 44%. We employ over 160 engineers and IT specialists in an R&D role. Come and see for yourself in a virtual tour: You, our customer are justified in your demand for the best products, quality and reliability. Providing competence in hygiene and Quality made in Germany, we guarantee that these demands will be met. It is our declared aim to contribute to the success of your daily work in the field of instrument treatmentand hygiene. The MELAG management and team. Berlin, January 2017

Contents Autoclaves according to pean standard EN 13060: Premium-Plus-Class Vacuklav 40 B+ ; 41 B+ ; 43 B+ ; 44 B+...4 Pro-Class Vacuklav 23 B+ ; 24 B+ ; 30 B+ ; 31 B+...5 Autoclave with extra deep chamber (e. g. for endoscopes): Vacuklav 24 BL+...5 MELAquick 12+/12+p The small Quick-Autoclaves...6 S-Class klav 23 VS+ ; 29 VS+ ; 23 S+...7 Premium-Plus-Class The big autoclaves for clinics and hospitals addording to pean standard EN 285 Cliniklave 45 / 45D Chamber volume: 1 Sterilization-Unit (30 x 30 x 60 cm)...8 Cliniclave 45M / 45MD Chamber volume: 2 Sterilization-Units (30 x 30 x 120 cm)...8 Washer disinfector according to pean standard EN 15883 MELAtherm 10 with built-in: active drying, dosage, system monitoring and documentation...12 MELAstore / Sealing devices / Sterilization Packagings / Sterilization containers MELAstore Wash trays, boxes and accessories...24 MELAseal Pro Rotary sealing device, validatable according to EN 11607-2...26 MELAseal 200 Sealing device, validatable according to EN 11607-2...26 MELAseal 100+ Sealing device...26 MELAfol See-through sterilization-package according to EN 868-5...27 Foil holder For better drying results of wrapped instruments...27 MELAG seal check Monitoring the sealing process...27 Sterilization containers / Paper filters for Sterilization containers according to EN 868-8 / -2...27 Documentation MELAtrace The software for documentation, clearance and traceability...28 MELAprint 60 Barcode Label-printer (for connection to a PC; Premium-Plus-Class and Cliniclave 45 / 45M)...28 MELAflash CF-Card-Printer for automatic cycle data storage with Pro-Class, S-Class and MELAquick 12+ / 12+p...28 MELAnet Box For networking of the Pro-Class, the S-Class and MELAquick 12+ / 12+p...28 Barcode hand scanner for use with MELAtrace to track and document the loading of an autoclave...29 MELAprint 42 Log printer...29 MELAdoc Label-printer...29 MELAcontrol Process-challenge device (Helix) according to EN 867-5...29 MELAcontrol PRO Process-challenge device (Helix) according to EN 867-5...29 Water treatment Water stop valve To prevent water damages in case of malfunctions...30 MELAtest 60 Tester for quality of aqua dem...30 Bacteria filter For MELAdem 47 and MELAdem 55...30 Accessories for the water supply of MELAG devices...30 MELAdem 47 Reverse-Osmosis-System...31 MELAdem 40 Ion-Exchanger-System...31 MELAjet Spray pistol to be connected at MELAdem 40...31 MELAdem 53 / 53 C Ion-Exchanger-System for MELAtherm 10...31 Water distributor For MELAdem 53 / MELAdem 53C...31 MELAdes Disinfectants MELAdes 600 Hand disinfectant...32 MELAdes 700 Quick surface disinfectant...32 MELAdes 800 / 801 Instrument disinfectant / Drill disinfectant...32 Standard-Autoclaves according to pean standard EN 13060 MELAtronic 23EN+ Standard autoclave...34 MELAtronic 15EN+ Class S with drying cycle...34 Standard-tray-cassettes / Swab drums...34 Dry-heat sterilizers Sterilizer 75 Volume: 4.3 litres...35 Sterilizer 205 Volume: 14 litres...35 Sterilizer 255 Volume: 21 litres...35 Pro-Class S-Class Cliniclave 45 Sealing devices/ Documentation Packagings MELAtherm Water treatment

Page 4 Premium-Plus-Class MELAG Premium-Plus-Class Premium-Plus-Class 9 kg maximum The autoclaves of our new Premium-Plus-Class are still the benchmark for all class B autoclaves. load! With their twin-chamber-technology, the biggest colour-touch-display and the possibility of releasing sterilization and evaluating the batch-control-system on the autoclave s screen, they set new standards on the market. A class B cycle takes 19 minutes to sterilize and dry wrapped instruments and only 11 minutes for unwrapped instruments. The clearance, labelling and traceability of wrapped sterilized equipment is facilitated with the barcode label printer MELAprint 60 which can be connected directly to autoclaves of the Premium-Plus-Class (for further information, see page 28: Documentation). Device design: tap-water connection. Connection is as easy as with a washing machine. Vacuklav 40 B+ Chamber: depth 35 cm, ø 25 cm, 18 litres. Tray (device holds 6 trays, dim. 29 x 19cm) Vacuklav 44 B+ Chamber: depth 45 cm, ø 25 cm, 22 litres. Tray (device holds 6 trays, dim. 42 x 19cm) 10060 8,815.- 00280 55.- 10064 9,890.- 00230 56.- Device design: stand alone. The only requirement for operation is an electrical socket. Vacuklav 41 B+ Chamber: depth 35 cm, ø 25 cm, 18 litres. Tray (device holds 6 trays, dim. 29 x 19cm) Vacuklav 43 B+ Chamber: depth 45 cm, ø 25 cm, 22 litres. Tray (device holds 6 trays, dim. 42 x 19cm) 10061 8,815.- 00280 55.- 10063 9,890.- 00230 56.- Flex-Display As an option, the Premium-Class can also be equipped with the Flex-Display instead of the standard display that is fixed with the housing of the autoclave. In this case the autoclave is connected via a 1.5 metre long cable to the display, which can be mounted on the wall or be set up on or near by the autoclave. The Flex-Display allows you to install the autoclave in a space only 50cm high because the wall cabinet. Please note on your order for the autoclave: With Flex-Display. 495.- Upgrading the Premium-Class autoclave from the black/white display to the new colour-touch-display is possible with little effort. The scope of delivery includes the colour-touch display, clearance software and the components required for the conversion. The price does not include the costs of the approx. 1 hour of working time and any travel expenses. 67205 880.- Three different mounts for your choice Premium-Class autoclaves are fitted with the mount >C< for holding trays, MELAstore-Boxes or sterilization containers as standard. Should you require another mount than the standard, please inform us with the order if you like mount >D< (for high cassettes, e.g. MELAstore-Box 200) or mount >E< for 6 standard trays and 2 additional narrow trays (to be ordered separately) for an optimum use of the chamber. Mount >C< for 6 trays Mount >C< (turned 90 ) for 3 MELAstore-Box 100 Mount >D< for 2 high cassettes, e.g. MELAstore-Box 200 Mount >E< for 6 standard trays and 2 narrow trays For chamber depth 35cm: Mount >C< 40232 93.- For chamber depth 45cm: Mount >C< 40242 93.- Mount >D< 46840 93.- Mount >D< 46840 93.- Mount >E< 40237 152.- Mount >E< 40238 152.- Narrow tray (short) for Mount >E< 01320 43.- Narrow tray (long) for Mount >E< 01310 47.-

MELAG Pro-Class Page 5 Pro-Class The thousand-fold practice-tested autoclaves of the Pro-Class are characterized by short program cycles, ease of operation and simple documentation. Unwrapped instruments needed quickly are available in only 15 minutes, including fractionated pre-vacuum. Wrapped instruments require 38-48 minutes depending on the load. The quick program B sterilizes up to 1.5 Kg of wrapped instruments in only 28 minutes (plus drying). When connected to a MELAnet box, the autoclave sends the program cycle data directly to the practice network. Documentation can also be performed using the MELAflash CF-Card printer, the software for documentation and clearence MELAtrace or the log printer MELAprint 42. Device design: tap-water connection. Connection is as easy as with a washing machine. Pro-Class Vacuklav 30 B+ Chamber: depth 35 cm, ø 25 cm, 18 litres. Tray (device holds 5 trays, dim. 29 x 19cm) Vacuklav 24 B+ Chamber: depth 45 cm, ø 25 cm, 22 litres. Tray (device holds 5 trays, dim. 42 x 19cm) Vacuklav 24 BL+ The autoclave for instruments up to 55 cm, i.e. rigid endoscopes and accessories Chamber: depth 60 cm, ø 25 cm, 29 litres. Tray (device holds 6 trays, dim. 55 x 19cm) 10050 7,555.- 00280 55.- 10054 8,260.- 00230 56.- 10052 9,670.- 00246 59.- S-Class Cliniclave 45 Device design: stand alone. The only requirement for operation is an electrical socket. Vacuklav 31 B+ Chamber: depth 35 cm, ø 25 cm, 18 litres. Tray (device holds 5 trays, dim. 29 x 19cm) Vacuklav 23 B+ Chamber: depth 45 cm, ø 25 cm, 22 litres. Tray (device holds 5 trays, dim. 42 x 19cm) Three different mounts for your choice Pro-Class autoclaves are fitted with the mount >A< for holding trays, MELAstore boxes cassettes or sterilization containers as standard. Should you require another mount than the standard, please inform us with the order if you like mount >B< or mount >D< (for two high cassettes e.g. for implant sets or two MELAstore boxes 200). Mount >A< for 5 trays 10051 7,555.- 00280 55.- 10053 8,260.- 00230 56.- Mount >A< (turned 90 ) for 3 standard-tray cassettes Mount >B< for 4 standard-tray cassettes Mount >D< for 2 high cassettes (e.g. MELAstore Box 200) Documentation Sealing devices/ Packagings MELAtherm For chamber depth 35cm: Mount >A< Mount >B< Mount >D< 40233 93.- 40234 93.- 46840 93.- For chamber depth 45cm: Mount >A< Mount >B< Mount >D< 40244 93.- 40224 93.- 46840 93.- Water treatment

Page 6 MELAquick MELAG MELAquick 12+ MELAquick Requirements for the preparation of dental instruments are defined by official hygiene experts. Instruments for semicritical use have to be prepared and treated after each patient, preferably in a validated, mechanized process. These compact quick autoclaves are conform to the pean standard EN 13060 and help save the practice time and money with its processing of handpieces that conform to the hygiene standards. Up to 12 hand pieces, prophylaxis instruments and much more can be sterilized in only 7 minutes in between patient treatment. The MELAquick 12+ and MELAquick 12+ p represent the ideal alternative to the sterilization of transfer instruments in a normal practice autoclave with its longer operating times. There are three S-Class programs available: A quick-program for unwrapped instruments and two programs for wrapped instruments. An efficient drying takes place by connecting the MELAquick 12+ to the compressed air supply of the practice in the preparation room. MELAquick 12+ p has a built-in compressor pump which permits operation of the autoclave irrespective of location. Installation requires only an electric socket, the supply with demineralized water from a water treatment system is possible. MELAquick 12+ requires a considerably smaller setup surface - 20.5 x 45 cm (w x D) as other autoclaves. MELAquick 12+ provides comprehensive opportunities for documentation: choose from the log printer MELAprint 42 or the MELAflash CF-Card printer, the MELAnet-Box for network connection up to batch clearance, traceability and labelling of the wrapped instruments with MELAtrace. MELAquick 12+ Compressed air supply for drying cycle necessary Chamber: Height 20 cm, ø 9 cm, volume 1.4 litres. (delivery inc. basket handle and 2 x 5 litre canisters for feed water and waste water) MELAquick 12+ p With built-in compressor pump Chamber: Height 20 cm, ø 9 cm, volume 1.4 litres. (delivery inc. basket handle and 2 x 5 litre canisters for feed water and waste water) 10012 4,050.- 11012 4,185.- The correct equipment for every need Please indicate which accessories you require with the order. Universal basket with a small parts insert on a drip mat Holder with 7 ISO-adapters on a drip mat Holder with 7 round mounts on a drip mat A foil holder for 3 wrapped instruments 00125 178.- 00126 178.- Universal basket with a small parts insert Foil holder Holder with ISO-adapters for 7 transfer instruments 00122 178.- Drip mat for basket and holder 00128 93.- Holder with round mounts for 7 transfer instruments 00123 178.- Holder for universal basket 00127 65.-

MELAG S-Class Page 7 S-Class The many thousands of S-Class autoclaves proven reliable in practice fulfil all stipulations of the pean standard EN 13060. They can be used to sterilize single wrapped instruments and simple hollow instruments such as scissors, acutenacula, transfer instruments etc. These autoclaves are also able to sterilize small quantities of single wrapped textiles. Unwrapped instruments are sterilized in only 15 minutes, including single pre-vacuum (klav 23 VS+ / klav 29 VS+). Wrapped instruments require 40 50 minutes, depending on the load (inc. drying). The autoclaves klav 23 VS+ and klav 29 VS+ work with a single pre-vacuum and an effective vacuum drying. The klav 23 S+ works with a fractionated gravity system and an effective current drying. When connected to a MELAnet Box, the autoclave sends the program cycle data directly to the practice network. Documentation can also be performed using the log printer MELAprint 42, the MELAflash CF-Card-Printer or the software for documentation and clearence MELAtrace. Device design: stand alone / single pre-vacuum The only requirement for operation is an electrical socket. klav 23 VS+ Chamber: depth 45 cm, ø 25 cm, 22 litres. Tray (device holds 5 trays, dim. 42 x 19cm) klav 29 VS+ Chamber: depth 35 cm, ø 25 cm, 18 litres. 10056 5,235.- 00230 56.- 10057 5,185.- S-Class Tray (device holds 5 trays, dim. 29 x 19cm) 00280 55.- Device design: stand alone / fractionated gravity system The only requirement for operation is an electrical socket. Cliniclave 45 klav 23 S+ Chamber: depth 45 cm, ø 25 cm, 22 litres. 10055 4,355.- Tray (device holds 5 trays, dim. 42 x 19cm) Three different mounts for your choice S-Class autoclaves are fitted with the mount >A< for holding trays, cassettes or sterilization containers as standard. Should you require another mount than the standard, please inform us with the order if you like mount >B< or mount >D< (for high cassettes). Mount >A< for 5 trays 00230 56.- Mount >A< (turned 90 ) for 3 standard-tray cassettes Mount >B< for 4 standard-tray cassettes Mount >D< with 2 sterilization containers 28M Documentation Sealing devices/ MELAtherm Packagings For chamber depth 35cm: Mount >A< Mount >B< Mount >D< 40233 93.- 40234 93.- 46840 93.- For chamber depth 45cm: Mount >A< Mount >B< Mount >D< 40244 93.- 40224 93.- 46840 93.- Water treatment

Page 8 Cliniclave 45 MELAG Cliniclave 45: The big autoclaves from MELAG Cliniclave 45 153 cm 91 cm Cliniclave 45 M Single door device Chamber: Ø 44cm x 134 cm deep Volume: 200 liters 2 Sterilization units (2 StU) Dimensions: W: 65 x H: 160 x D: 153 cm Cliniclave 45 Single door device Chamber: Ø 44cm x 72 cm deep Volume: 105 liters 1 Sterilization unit (1 StU) Dimensions: W: 65 x H: 160 x D: 91 cm Cliniclave 45 MD Double door device Chamber: Ø 44cm x 136 cm deep Volume: 205 liters 2 Sterilization units (2 StU) Dimensions: W: 65 x H: 160 x D: 163 cm Cliniclave 45 D Double door device Chamber: Ø 44cm x 74 cm deep Volume: 110 liters 1 Sterilization unit (1 StU) Dimensions: W: 65 x H: 160 x D: 101 cm

MELAG Cliniclave 45 Page 9 In two versions: as single-door device or as double-door pass-through device D. Cliniclave 45 Installation example: Cliniclave 45 MD (double door device) fitted in a partition wall with dust-proof wall cladding on the loading side and the removal side. The wall cladding is included in the scope of delivery of the double door steam sterilizer. The sterilization of larger quantities of instruments and textiles and their quick availability is one of the most important requirements in clinics, practices and out-patient centres. The Cliniclave 45 and Cliniclave 45 D have a capacity of one sterilization unit for up to 35 kg of wrapped instruments or 7 kg of textiles. The Cliniclave 45 M and Cliniclave 45 MD have a capacity of two sterilization units for up to 70 kg of wrapped instruments or 14 kg of textiles. As a result, these autoclaves outperform many other big-autoclaves. And all that with extremely short operating times: Wrapped instrumentscan be processed in the quick program B in a record time of 30 minutes (including drying). The very large colour-touch-display enables intuitive operation, helping the operator to avoid errors and find all important information. The documentation and clearance software already installed in permits complete reproducibility and secure traceability. The label-printer MELAprint 60 provides additionaly the labelling and the traceability of wrapped instruments. All program cycles and information about the clearance can be stored on the MELAflash CF-Card that ist included in the scope of delivery. The Cliniclave 45 and the Cliniclave 45M can be integrated in a network via the built-in Ethernet interface, e. g. for the documentation with MELAtrace. Documentation Sealing devices/ Packagings MELAtherm Water treatment Both autoclaves comply with the requirements of EN 285 and EN 1717 and they are therefore the ideal sterilizers for group practices, day hospitals, medical care centers etc.

Page 10 Cliniclave 45 MELAG Cliniclave 45 and Cliniclave 45 M The Cliniclave 45 and the Cliniclave 45 M are fitted with a door hinge on the left or right-hand side. Please indicate which version you require with the order. The delivery, connection, commissioning and training is performed by your MELAG-authorized partner. This takes approx. 8 hours. Cliniclave 45 Single door device 10045 28,875.- 3N AC 400V, 50Hz, 3 x 16A Door hinge left-hand side Included in scope of delivery: Unterschrank für Cliniclave 45 11045 Door hinge left-hand side Cliniclave 45 Single door device 10047 28,875.- 3N AC 400V, 50Hz, 3 x 16A Door hinge right-hand side Included in scope of delivery: Sub-cabinet for Cliniclave 45 11047 Door hinge right-hand side Cliniclave 45 MELAdem 56 11056 1,775.- Water-treament unit for Cliniclave 45 (Reverse-Osmosis-System) Cliniclave 45 M Single door device 10048 31,405.- Delivery including sub-cabinet 3N AC 400V, 50Hz, 3 x 16A Door hinge on the left or right-hand side of your choice MELAdem 56 M 11057 1,995.- Water treatment unit for Cliniclave 45M (Reverse-Osmosis-System) Accessories for Cliniclave 45 and Cliniclave 45 M: The Cliniclave 45 and Cliniclave 45 M are fitted with the sliding rail standard, used to insert tray mounts and sterilization containers. MELAG provides a loading system - consisting of loading trolley, the sliding rail comfort, a batch slider and loading hook - to facilitate the ergonomic loading of these steam sterilizers. Insert frame for 4 trays or 2 baskets (C45 holds 1 piece / C45 M holds 2 pcs.) 1 04517 160.- Tray for Cliniclave 45 / 45 M, Aluminium (W: 31 cm x D: 58 cm x H: 5 cm) 00450 154.- 1 Instrument basket, stainless steel (W: 28 cm x D: 57 cm x H: 13 cm) 00260 199.- Insert frame for 5 MELAstore Boxes 100 (C45: 3 pieces / C45 M: 6 pieces) 2 04518 120.- Insert frame for 6 standard tray cassettes (C45: 3 pieces / C45 M: 6 pieces) 02518 120.- Insert frame for 8 trays no. 00280 (C45: 3 pieces / C45 M: 6 pieces) 3 02519 120.- Water-stop-valve (Leakage detector) 01056 145.- Loading system, consisting of: Loading trolley 01145 1,450.- Batch slider (for Cliniclave 45 M you need 2 pieces) 46891 255.- Push hook 28887 110.- Sliding rail comfort for Cliniclave 45 80550 300.- Sliding rail comfort for Cliniclave 45 M 80570 405.- 2 For further information about documentation see page 28 and 29. 3

MELAG Cliniclave 45 Page 11 Cliniclave 45 D and Cliniclave 45 MD The pass-through steam sterilizers Cliniclave 45 D and Cliniclave 45 MD have been designed for clinics and practices which decontaminate medical products in accordance with the multi-room concept. To this end, our steam sterilizers are fitted with a door on both the loading side and the removal side. The door hinge can be placed on either the right or left-hand side. The scope of delivery includes the requisite wall claddings made of high-quality stainless steel to enable contamination-free installation in a dividing wall. Any wall breakthroughs are to be performed on the customer side in accordance with MELAG specifications. The delivery, connection, commissioning and training is performed by your MELAG-authorized partner. This takes approx. 10 hours. Cliniclave 45 D Double door device 10046 33,150.- 3N AC 400V, 50Hz, 3 x 16A Door hinge of loading side and removal side of your choice Delivery including sub-cabinet Door hinge of loading side of your choice, removal side is closed MELAdem 56 11056 1,775.- Water treatment unit for Cliniclave 45 D (Reverse-Osmosis-System) Cliniclave 45 MD Double door device 10049 36,315.- 3N AC 400V, 50Hz, 3 x 16A Door hinge of loading side and removal side of your choice Delivery including sub-cabinet Door hinge of loading side of your choice, removal side is closed Cliniclave 45 MELAdem 56 M 11057 1,995.- Water treatment unit for Cliniclave 45 MD (Reverse-Osmosis-System) Accessories für Cliniclave 45 D and Cliniclave 45 MD: The Cliniclave 45 D and Cliniclave 45 MD are fitted with the sliding rail standard, which is used to insert the tray mount and the sterilization containers on the loading side and remove them from the removal side. MELAG provides a loading system - consisting of loading trolley, the sliding rail comfort, a batch slider and the push hook - to facilitate the ergonomic loading of these steam sterilizers. Loading trolley with containers Insert frame for 4 trays or 2 baskets (C45 holds 1 piece / C45 M holds 2 pcs.) 1 04522 160.- Tray for Cliniclave 45D / 45 MD Aluminium (W: 31 cm x D: 58 cm x H: 5 cm) 04520 160.- Instrument basket stainless steel (W: 28 cm x D: 57 cm x H: 13 cm) 00260 199.- Insert frame for 5 MELAstore Boxes 100 (C45 D: 3 pieces / C45 MD: 6 pieces) 2 04518 120.- Insert frame for 6 standard tray cassettes (C45 D: 3 pieces / C45 MD: 6 pieces) 02518 120.- Insert frame for 8 trays no. 00280 (C45 D: 3 pieces / C45 MD: 6 pieces) 3 02519 120.- Water-stop-valve (Leakage detector) 01056 145.- Loading system, consisting of: Loading trolley 01145 1,450.- Batch slider (for Cliniclave 45 MD you need 2 pieces) 04521 300.- Push hook 28887 110.- Sliding rail comfort for Cliniclave 45 D 85920 352.- Sliding rail comfort for Cliniclave 45 MD 85930 456.- For further information about documentation see page 28 and 29. Water treatment Sealing devices/ Documentation Packagings MELAtherm

Page 12 MELAtherm MELAG MELAtherm and MELAstore The perfect combination for safe treatment and even greater time savings. The advantages of the MELAstore loading system at a glance: Saves time in the loading and unloading of the instruments from MELAtherm. Increases the quality of the overall treatment through standardization and documentation. Safe instrument storage provides protection against personal injury and damage to the instruments. Reduces of practice waste (e. g. sterilization packages) MELAstore-Tray 100 loaded with instruments Insert rack for six MELAstore-Tray 100 MELAtherm MELAtherm loaded with twelve MELAstore-Trays 100

MELAG MELAtherm Page 13 MELAtherm 10 its performance makes the difference! With active drying instruments need to be dry. Active exterior an interior drying protects the instruments against corrosion and damage. With a practice-optimized treatment chamber automatic treatment must be safe, ergonomic and low-priced. The combination of its spatial concept with a versatile range of baskets helps save both time and money. With integrated process agents and a metering module integration of the process agents creates extra space, makes working easier and helps to avoid errors. No need for additional costs for the metering of process media. With integrated documentation With an integrated CF card slot and two network interfaces. No additional costs for documentation. MELAtherm 10 DTA under-desk equipment - three-phase current Exterior dimensions: Height: 82cm x Width: 60 cm x Depth: 60cm 10020 7,995.- 3N AC 400V, 50Hz, 3 x 16A MELAtherm 10 DTB under-desk equipment - alternating current Exterior dimensions: Height: 82cm x Width: 60cm x Depth: 60cm 10021 7,995.- 230V, 50Hz, 16A Stainless steel cover plate, in case the device is not 65310 210.- covered by an end-to-end surface. MELAtherm 10 with cover plate Basis baskets for MELAtherm 10 Depending on the purpose of use, MELAG offers four basis baskets: with injector rail (without filter), with basis basket and central filter and a basis basket without an injector rail. The basis baskets with injector rail are equipped with 11 injector nozzles / locking screws or with 11 blind screws. The injector rail can be fitted with various of hollow adapters or with adapters for Luer / Luer-Lock connectors. Basis basket without injector rail Length: 43cm x Width: 42cm x Height: 9cm 00188 535.- Basis basket with injector rail (with11 blind screws) 00200 605.- Length: 43cm x Width: 42cm x Height: 12cm Basis basket with injector rail 00197 689.- (with 11 injector nozzles and clamp springs) Length: 43cm x Width: 42cm x Height: 12cm We recommend use of the basis basket with an injector rail and central filter for the safe and affordable treatment of a minimum of 6 transfer instruments. A control display indicates the need to replace the central filter. Basis basket with injector rail (incl. 2 central filter inserts) (with 5 injector nozzles and clamp springs and 6 locking screws) Length: 43cm x Width: 42cm x Height: 12cm 80440 915.- Conversion kit injector rail (incl. 2 central filter inserts) 80480 350.- Replaces the injector rail without central filter Central filter insert for injector rail 80490 60.- Repaces the used in the injector rail Floor unit for MELAtherm 10 The MELAtherm is transformed into a top-frame device by the floor unit. This enables a particularly ergonomic operation and loading of the MELAtherm. Moreover, it makes the organizational division of the unclean and clean area in the treatment room easier. The floor unit provides additional storage area and mounted on casters, facilitates any maintenance measures. Floor unit for MELAtherm 10 Height: 40cm x Width: 60cm x Depth: 60cm 11020 890.- Basis basket with injector rail Central filter insert Basis basket without injector rail Conversion kit injector rail with central filter Sealing devices/ Documentation Packagings MELAtherm Water treatment

Page 14 MELAtherm - Basic configurations MELAG Solutions for all specialist surgeries. The versatility of MELAtherm 10. The practice-optimized chamber of MELAtherm 10 produces short operating times, ergonomic work practices, a low consumption of process agents and optimal cleaning results. MELAG provides a wide range of special baskets to cater for all surgery needs. As this range is subject to continuous update, we cannot provide a complete description. The whole up-to-date program is available on the MELAtherm 10 pages of our website www.melag.com. The following examples drawn from four surgeries, demonstrate the wide-ranging nature of our product range. Basic configuration for the dental practice: Instruments for more than 40 patients can be processed in a single treatment procedure of MELAtherm in record time. 1 x 00197: Basis basket with injector rail (with 11 nozzles & clamp springs) 1 x 00180: Insert rack for 3 MELAstore-Trays / sieve cassettes 3 x 01181: MELAstore-Tray 100 1 x 80020: Flex basket 2 1 x 80110: Insert rack for impression trays, scissors and clamps 1 x 80120: Insert rack for hinged instruments 1 x 00184: Instrument basket standard 1 x 00133: Small-parts basket as an option: Adapters for the injector rail for hollow instruments (see from page 20) Basic configuration for the OMF surgery: The Instruments are reprocessed as a set (e. g. PA, OST, etc.) in wash trays in one cycle of MELAtherm in record time. MELAtherm 1 x 00197: Basis basket with injector rail (with 11 nozzles & clamp springs) 1 x 80810: Insert rack for MELAstore-Trays 50 / 100 6 x 00181: MELAstore-Tray 100 1 x 00180: Insert rack for 3 MELAstore-Trays / sieve cassettes 3 x 01182: MELAstore-Tray 200 1 x 00195: Instrument basket compact as an option: Adapters for the injector rail for hollow instruments (see from page 20) Basic configuration for orthodontists: By using the following accessories, the instruments of an orthodontic practice can be processed in record time. 1 x 00197: Basis basket with injector rail (with 11 nozzles & clamp springs) 2 x 80020: Flex basket 2 2 x 80110: Insert rack for impression trays, scissors and clamps 2 x 80120: Insert rack for hinged instruments 1 x 00184: Instrument basket standard as an option: Adapters for the injector rail for hollow instruments (see from page 20)

MELAG MELAtherm - Basic configurations Page 15 Optimum use of the basis basket For an effective loading of MELAtherm 10 the basis baskets can be load with a various number and choice of baskets, wash trays and insert racks. Therefore the basis baskets are conceptually divided into six segments for the further loading with baskets etc. Loading with baskets, mounts etc. can be combined flexibly so that the six useable segments can be subject to optimal utilization: 1/6 2/6 along 2/6 across 3/6 6/6 For the gynecological practice: Up to 32 specula can be reprocessed in one cycle of MELAtherm in record time. 1 x 00188: Basis basket without injector rail 1 x 80255: Flex basket 6 2 x 80410: Flex basket specula If also hollow instruments are reprocessed, we recommend the use of the basis basket with injector rail (order no. 00200). Basic configuration for the ENT practice: Up to 192 ear specula and / or a variety of other instruments can be processed in one cycle of MELAtherm in record time. 1 x 00200: Basis basket with injector rail (with 11 blind screws) 1 x 80020: Flex basket 2 1 x 80030: Flex basket 3 1 x 00195: Instrument basket >compact< 1 x 80090: Top frame for ear specula Flex 2, mesh size 20mm 1 x 80435: Top frame for nose specula Flex 1 (incl. 2 fixing clamps) as an option: Adapters for the injector rail for hollow instruments (see from page 20) For surgery, orthopedics, dermatology, urology, general medicine etc: With a variety of stackable flex baskets, hose connections and adaptors for up to 33 instruments with cavities, the MELAtherm 10 is also suitable for larger surgeries. 1 x 00200: Basis basket with injector rail (with 11 blind screws) 1 x 80255: Flex basket 6 2 x 80030: Flex basket 3 as an option: Adapters for the injector rail for hollow instruments (see from page 20) Sealing devices/ Documentation Packagings MELAtherm Water treatment

Page 16 MELAtherm accessories MELAG Insert rack for 3 MELAstore-Trays / sieve cassettes 00180 108.- For the acceptance of up to 3 MELAstore-Trays 100 (order no. 01181) or up to 3 MELAstore-Trays 200 (order no. 01182) or up to 3 sieve cassettes with separation inlay & penetration protection (order no. 80185) 2/6 along Insert rack for 4 MELAstore-Trays / sieve cassettes 80040 143.- For the acceptance of up to 4 MELAstore-Trays 100 (order no. 01181) or up to 4 MELAstore-Trays 200 (order no. 01182) or up to 4 sieve cassettes with separation inlay & penetration protection (order no. 80185) 3/6 Insert rack for MELAstore-Trays 50 / 100 80810 198.- For the acceptance of up to 6 MELAstore-Tray 100 (order no. 01181) or up to 12 MELAstore-Tray 50 (order no. 01180) 3/6 Insert rack for 5 trays / 10 half trays For the acceptance of up to 5 trays or 10 half trays. 80590 112.- 2/6 across MELAtherm Instrument basket G 00131 189.- For vertically standing instruments such as e.g. scissors, tweezers, clamps, probes, mirrors and dental aspirator tips with a connection for 11mm or 16mm. Can be combined with the Needle tip plate (order no. 0186). 2/6 along Instrument basket compact 00195 165.- For vertically standing instruments such as e.g. tweezers, probes, mirrors, nasal specula and dental aspirator tips with a connection for 11mm or 16mm. Can be combined with the Needle tip plate (order no. 0186). 1/6 Instrument basket standard 00184 165.- For vertically standing instruments such as e.g. tweezers, probes, mirrors, scissors, clamps and dental aspirator tips with a connection for 11mm or 16mm. Can be combined with the Needle tip plate (order no. 0186). 2/6 across

MELAG MELAtherm accessories Page 17 Sieve cassette with separation inlay and penetration protection 80185 225.- For the treatment of instrument sets or large quantities of individual instruments. Can be used in connection with the insert racks for perforated cartridges ( 00180 / 80040). Exterior dimensions: Width: 17.5cm x Depth: 26.5cm x Height: 5cm Protection inlay for sieve cassette 00189 51.- Separates instruments in the perforated cartridges so as to avoid spray shadow. Prevents protrusion through the perforated cartridge so as to protect instruments with sensitive points. Penetration protection for sieve cassette 00190 20.- Prevents the protrusion of pointed instruments through the wire gauze of the perforated cartridge. Separation inlay for sieve cassette 00191 42.- Separates instruments in the perforated cartridges so as to avoid spray shadow. Tip support for instrument basket 00186 20.- Prevents sharp instruments from slipping through the basket meshing. Can be deployed in the instrument basket (order no. 00184). Dimensions: Width: 17 cm x Depth: 3 cm x Height: 4.5 cm Small-parts basket 00133 20.- For the safe treatment of the smallest of instruments. The small parts container can be placed in the flex basket or the instrument baskets. Dimensions: Ø 7.6 cm x length: 18 cm Holding frame for injector rail 62290 97.- For a safe processing of long instruments that are attached on the injector rail. Sealing devices/ Documentation Packagings MELAtherm Water treatment

Page 18 MELAtherm Flex-System MELAG The Flex system brings a number of possibilities MELAG s in-house development, the exceptionally variable Flex system provides numerous loading combinations, thus enabling optimal utilization of the washing chamber. Using flex basket 6 as a basis, it is possible to stack the various flex baskets 1, 2 and 3, the flex basket specula or the insert rack for scissors / clamps or impression trays in max. two levels. The picture on the right shows the ear speculum attachment flex 2 stacked on flex basket 3 in combination with flex-basket 1 and the ear speculum attachment flex 1. Beyond this, we also provide countless further variations. Flex basket 1 80010 143.- For instruments lying flat e.g. scissors, tweezers, mirrors etc. Stackable with flex baskets 1, 2, 3 and 6. Interior dimensions: Width: 14.5 cm x Depth: 11 cm x Height: 6 cm 1/6 Flex basket 2 80020 169.- For instruments lying flat e.g. scissors, tweezers, mirrors, root elevators etc. Stackable with flex baskets 1, 2, 3 and 6. Interior dimensions: Width: 14.5 cm x Depth: 24 cm x Height: 6 cm 2/6 along Flex basket 3 80030 189.- For instruments lying flat e.g. scissors, tweezers, suction tubes etc. Stackable with flex baskets 1, 2, 3 and 6. Interior dimensions: Width: 14.5 cm x Depth: 37.5 cm x Height: 6 cm 3/6 MELAtherm Flex basket 6 80255 275.- For long instruments lying flat e.g. scissors, tweezers, mirrors etc of a length up to 40 cm. As a basis under the flex baskets 1, 2, 3 and under the flex basket specula. Interior dimensions: Width: 34 cm x Depth: 38 cm x Height: 3 cm 6/6 Injector basket Flex 1 80740 289.- For the reprocessing of up to 6 dental ultrasonic and scaler tips with torque wrench The requisite filtration requires either the basis basket with injector rail and central filter (80440) or two additional single filter housings (73905) for the basis basket with injector rail (00197) Delivery with hoses and 2 hose connectors with inner thread 1/6 Insert rack for impression trays, scissors and clamps 80110 153.- For up to 8 dental impression trays and also for scissors and clamps The scissors and clamps are to be opened and hung from their ring grips (eyes). Stackable with flex baskets 1, 2, 3 and 6. 1/6 Insert rack for hinged instruments 80120 143.- For hanging hinged instruments e.g. scissors, needle holder, clamps etc. Stackable with flex baskets 1, 2, 3, 6 and the insert rack for impression trays (80110). 1/6

MELAG MELAtherm Flex-System Page 19 Flex basket specula 80410 215.- For gynaecological specula. Holds up to 8 sets Kristell / 16 Cusco / Semm specula. 2 stackable on flex basket 6. 3/6 Top frame for ear specula Flex 1, mesh size 14mm 80070 66.- For up to 50 ear specula. For setting on the flex baskets 1, 2 and 3. Can also be used as a lid. Possible in any combination with the flex baskets 1, 2 and 3. Flex baskets can be partially filled with these or subject to comprehensive use (e.g. 3 on a flex basket 3). 1/6 Top frame for ear specula Flex 1, mesh size 20mm 80080 58.- For up to 24 ear specula. For setting on the flex baskets 1, 2 and 3. Can also be used as a lid. Possible in any combination with the flex baskets 1, 2 and 3. Flex baskets can be partially filled with these or subject to comprehensive use (e.g. 2 on 1 flex basket 2). 1/6 Top frame for ear specula Flex 2, mesh size 20mm 80090 87.- For up to 60 ear specula. For setting on the flex baskets 1, 2 and 3. Can also be used as a lid. Possible in any combination with the flex baskets 1, 2 and 3. Flex baskets can be partially filled with these or subject to comprehensive use (e.g. 1 on 2 flex baskets 1). 2/6 along Top frame for ear specula Flex 3, mesh size 20mm 80100 107.- For up to 96 ear specula. For setting on the flex baskets 1, 2 and 3. Can also be used as a lid. Possible in any combination with the flex baskets 1, 2 and 3. Flex baskets can be partially filled with these or subject to comprehensive use (e.g. 1 on 3 flex baskets 1). Top frame for nose specula Flex 1 (incl. 2 fixing clamps) 80435 84.- For self-retaining instruments e.g. nasal specula. Usable with flex baskets 1, 2, and 3. Fixing clamp for top-frame 80420 14.- Already included in the scope of delivery of the top frame for nose specula with the order no. 80435. Also usable for all top frames for ear specula. For fixing one top frame you need two pieces of the fixing clamp. 3/6 1/6 Sealing devices/ Documentation Packagings MELAtherm Instrument holder for flex baskets (60 pcs.) 80395 95.- For insertion into the mesh of the flex baskets for a save fixing of instruments in a flex basket. Water treatment

Page 20 MELAtherm Accessories for injector rail MELAG Universal adapter (incl. 3 inserts and filter disc) 73904 For processing of transfer instruments, scalers of powder jet devices, etc. Delivered incl. 3 silicone inserts: green (Ø 16mm), blue (Ø 20mm) and white (Ø 22mm) Can be screwed into the injector rail or into the injector basket Flex 1. The filter disc included in the sope of delivery is only required for the injector rail without central filter. Triple distributor (incl. ceramic filter disc) 73903 116.- For mounting on the injector rail, if a number of hollow instruments are to be processed with filtered or unfiltered water. The filter disc included in the sope of delivery is only required for the injector rail without central filter. 128.- Double distributor 80200 98.- For mounting on the injector rail, if a number of hollow instruments are to be treated. For up to 2 injector nozzles (with clamps possible), Luer / Luer-Lock adapters or hose connectors. Dimensions: Ø 36 mm x height: 34 mm Filter disc housing (incl. ceramic filter disc) 73905 65.- Adapters for hollow instruments can be screwed into the disc housing if the instruments need to be rinsed with filtered water. Use two single filter housings to connect the injector basket Flex 1 to an injector rail without central filter. The filter disc included in the sope of delivery is only required for the injector rail without central filter. Distance sleeve 55120 15.- MELAtherm For the maximum use of the injector rail with adapters for hand pieces / tripple distributor. When using more than 6 adapters, a distance sleeve is required for each further adapter. Dimensions: Ø 10 mm x height: 33 mm. Ceramic filter disc (10 pcs.) 64375 56.- For use with the universal adapter (73904), the triple distributor (73903) or with the filter disc housing (73905). Can be used in MELAtherm 10 for max. 20 rinse cycles. Metal filter disc 80350 54.- For use with the universal adapter (73904), the triple distributor (73903) or with the filter disc housing (73905). After 20 rinse cycles in MELAtherm 10, the filter disc must be cleaned in the ultrasound bath. The filter disc can be cleaned up to 20 times in the ultrasound bath. Rinse sleeve for instruments with outer Ø 2-11mm 80260 85.- For hollow instruments with an exterior diameter from 2mm to 11mm and a non-standardized connection. If the rinse sleeve ist screwed into the injector rail, it is possible to treat instruments of up to a length of 22cm. The rinse sleeve extension and 5 silicon inserts with different diameters are included in the scope of delivery. Screw plug for injector rail and distributors 80140 12.- To seal non-required apertures in the injector rail, in the double distributor or in the triple distributor.

MELAG MELAtherm Accessories for injector rail Page 21 Adapter for ISO connector (INTRA-coupling) 80610 52.- Can be used in conjunction with the basis basket with injector rail and the central filter (80440) or with the basis basket with injector (00197) and additional single filter housing (73905) Adapter for Sirona Classic 80620 62.- Can be used in conjunction with the basis basket with injector rail and the central filter (80440) or with the basis basket with injector (00197) and additional single filter housing (73905) Adapter for heads of KaVo contra angles 80630 52.- Can be used in conjunction with the basis basket with injector rail and the central filter (80440) or with the basis basket with injector (00197) and additional single filter housing (73905) Adapter for W&H turbines 80640 62.- Can be used in conjunction with the basis basket with injector rail and the central filter (80440) or with the basis basket with injector (00197) and additional single filter housing (73905) Adapter for Sirona turbines 80650 52.- Can be used in conjunction with the basis basket with injector rail and the central filter (80440) or with the basis basket with injector (00197) and additional single filter housing (73905) Adapter for KaVo turbines (Multiflex-connector) 80660 52.- Can be used in conjunction with the basis basket with injector rail and the central filter (80440) or with the basis basket with injector (00197) and additional single filter housing (73905) Adapter for external spray channels 74135 39.- For processing of e.g. surgical turbines with exterior spray channels. An additional adapter for hand pieces is required for interior cleaning and disinfection. The adapter is screwed directly into the injector rail or in the triple/double distributor. Injector nozzle 73860 12.- For the treatment of hollow instruments e.g. dental suction tubes etc. Can be screwed into the injector rail, the double distributor or into the triple distributor. Outer diameter: 4mm Sealing devices/ Documentation Packagings MELAtherm Clamp spring for injector nozzle 00196 10.- Jams in light instruments, so that they do not slip from the injector nozzle through th rinse pressure. Can be used for the injector nozzle if these are screwed into the injector rail or into the double distributor. Water treatment

Page 22 MELAtherm Accessories for injector rail (dental) MELAG Automatic treatment of dental ultrasonic and scaler tips The standard-compliant and hygiene-safe treatment of ultrasonic tips, air-scaler tips etc. is assuming ever-greater importance. To this end MELAG provides a selection of adapters for the thread sizes of the various manufacturers. These adapters can only be used if the user can ensure filtration of the water flowing through the adapter and through the instrument. To this end, we recommend the injector rail with central filter, if more than 6 hollow instruments are treated. To those using an injector rail without a central filter, we recommend the single filter housing. Should the number of connections available on the injector rail prove to be insufficient, the injector basket Flex 1 can be connected to the injector rail for further universal tips or scaler tips. The connection is made directly with the injector rail with central filter; the injector rail without a filter requires two further single filter housings. + + = Injector basket Flex 1 + Adapters for tips + Filter disc housing = Injector basket Flex 1 assembled Adapter for tips M3.0 x 0.5mm, male 80750 31.- Can be used in conjunction with the basis basket with injector rail and central filter (80440), with the basis basket with injector rail (00197) and additional filter disc housing (73905) or with the injector basket Flex 1 (80740). e.g. for KaVo SONOsoft, Piezo LUX; EMS Piezon Swiss Instruments; W&H Piezo Scaler; Komet PiezoLine EM1, KA1, KA2; NSK Varios EMS. Adapter for tips M3.5 x 0.6mm, female 80760 31.- MELAtherm Can be used in conjunction with the basis basket with injector rail and central filter (80440), with the basis basket with injector rail (00197) and additional filter disc housing (73905) or with the injector basket Flex 1 (80740). e.g. for Sirona SIROSON, SIROSONIC, PerioSonic; Komet PiezoLine SI1; Dürr Vector Scaler. Adapter for tips M3 x 0.5mm, female 80790 31.- Can be used in conjunction with the basis basket with injector rail and central filter (80440), with the basis basket with injector rail (00197) and additional filter disc housing (73905) or with the injector basket Flex 1 (80740). e.g. for KaVo SONICflex 2000, 2003; Sirona SIROAIR L; W&H Luftscaler; Komet SonicLine SF1LM; NSK Luftscaler. Availableas from march 2017 Adapter for tips M3.6 x PH1.5 P0.5, female 80751 31.- Can be used in conjunction with the basis basket with injector rail and central filter (80440), with the basis basket with injector rail (00197) and additional filter disc housing (73905) or with the injector basket Flex 1 (80740). e.g. for KaVo SONICflex quick 2008. Availableas from march 2017 Adapter for tips M3.0 x 0.35mm, male 80752 31.- Can be used in conjunction with the basis basket with injector rail and central filter (80440), with the basis basket with injector rail (00197) and additional filter disc housing (73905) or with the injector basket Flex 1 (80740). e.g. for KaVo PiezoLED, PiezoSoft. Availableas from march 2017 Adapter for tips M3.6 x PH1.5 P0.5, female 80756 31.- Can be used in conjunction with the basis basket with injector rail and central filter (80440), with the basis basket with injector rail (00197) and additional filter disc housing (73905) or with the injector basket Flex 1 (80740). e.g. for Acteon (Satelec) Newtron, Suprasson; NSK Varios Satelec.

MELAG MELAtherm Accessories for injector rail Page 23 Adapter (male) for Luer 73880 25.- For the treatment of instruments / hollow needles for a Luer connection (female). Can be screwed into the injector rail, the triple distributor or into the double distributor. Adapter (male) for Luer-Lock 74130 32.- For the treatment of instruments / hollow needles for a Luer-Lock connection (female). Can be screwed into the injector rail, the triple distributor or into the double distributor. Seal (female) for Luer / Luer-Lock 80180 25.- To seal a Luer adaptor ( 73880) or a Luer-Lock ( 74130) if this is not required. Adapter (female) for Luer / Luer-Lock 67250 32.- For the treatment of instruments / hollow needles for a Luer connection (male) or a Luer-Lock connection (male). Can be screwed into the injector rail, the triple distributor or into the double distributor. Seal (male) for Luer-Lock 80170 25.- For sealing an adapter for Luer-Lock (order 67250) if this is not required. Hose connection with external thread 80150 32.- For hoses with a 6 mm interior diameter e.g. silicon hose ( 80190). Can be screwed into the injector rail, into the double distributor, into the triple distributor and into the disc filter housing. MELAtherm Hose connection with internal thread 80160 32.- For hoses with a 6 mm interior diameter e.g. silicon hose ( 80190). Can be combined with the adapters for Luer / Luer-Lock, the triple distributor ( 73903), the rinsing capsule ( 80260) etc. Hose extension with connections 80195 44.- For hoses with a 6 mm interior diameter e.g. silicon hose ( 80190). Can be combined with the adapters for Luer / Luer-Lock, the triple distributor ( 73903), the rinsing capsule ( 80260) etc. Silicon hose, 10/6mm 80190 8.- Highly flexible, kink-free silicon hose for connecting connections with instruments. Instruments can also be pressed into the hose. Delivery by the metre. Sealing devices/ Packagings Documentation Screw plug for injector rail and distributors 80140 12.- To seal non-required apertures in the injector rail, in the triple distributor or in the double distributor. Water treatment

Page 24 MELAstore MELAG MELAstore Trays l Wash trays for the automatic reprocessing The reprocessing of instruments with the integrated system of MELAstore-Trays and MELAstore-Boxes saves time and money: With MELAstore you simplify your workflow of the instruments from the patient treatment to the reprocessing and finally the storage of sterilized goods. The MELAstore-Trays are made of high-quality stainless steel and are optimized for the loading of MELAtherm. The wide opened mesh of the MELAstore-Trays ensure best cleaning results. For the comprehensive and complete documentation of the instrument reprocessing, the MELAstore-Trays can be equipped with identification plates. MELAstore-Trays offer: - significant time saving in the loading and unloading of the instruments from MELAtherm - increasing the quality of the overall reprocessing through standardization and documentation - a safe handling of the instruments by fixing them into silicone bars - protection against personal injury of the practice team Order-no. MELAstore -Tray 50 01180 112.- Delivered incl. two silicone bars for up to 8 instruments with a length of max. 17.5cm. Width: 11.8cm x Length: 18cm x Height: 3cm MELAstore Silicone bar of MELAstore-Tray 50 82960 11.- MELAstore Tray 50 Silicone bar of MELAstore-Tray 50 MELAstore Tray 100 Silicone bar of MELAstore-Tray 100 MELAstore -Tray 100 01181 154.- Delivered incl. three silicone bars for up to 14 instruments with a length of max. 27cm. Width: 17.6cm x Length: 27.5cm x Height: 3cm MELAstore Silicone bar of MELAstore-Tray 100 82970 13.- MELAstore -Tray 200 01182 174.- Delivered incl. three silicone bars for up to 13 instruments with a length of max. 27cm. Width: 17.6cm x Length: 27.5cm x Height: 4.3cm MELAstore Silicone bar of MELAstore-Tray 200 82980 15.- MELAstore Tray 200 Silicone bar of MELAstore-Tray 200 Sealing devices/ Packagings MELAstore Box l sterilization containers according DIN 58953-9 For sterilization, the MELAstore-Trays are inserted in the corresponding MELAstore-Box. The lid of the MELAstore-Boxes are perforated and equipped with a holder for a filter. The filters are available as disposable paper filters or as permanent filters and have to be ordered separately. For marking the MELAstore-Boxes MELAG offers identification plates with or without barcode that are fixed in the holder of the MELAstore-Box. There are also disposable seals available, with or without process indicator. Order-no. MELAstore -Box 100 01191 205.- For the acceptance of one MELAstore-Tray 100 or of 2 MELAstore-Trays 50 Width: 19cm x Length: 31.2cm x Height: 4.6cm MELAstore permanent filter, 2 pcs. (for up to 1,000 cycles) 01193 36.- MELAstore disposable paper filter, 100 pcs. 01194 19.- MELAstore Box 100 Order-no. MELAstore -Box 200 01192 215.- For the acceptance of one MELAstore-Tray 200 or of 2 MELAstore-Trays 100 Width: 19cm x Length: 31.2cm x Height: 6.5cm MELAstore permanent filter, 2 pcs. (for up to 1,000 cycles) 01193 36.- MELAstore disposable paper filter, 100 pcs. 01194 19.- MELAstore Box 200

MELAG MELAstore Page 25 MELAstore permanent filters l according pean standard EN 868-2 MELAstore permanent filters are designed for the use in the MELAstore-Box 100 and in the MELAstore-Box 200. In case of damages or soiling the filter has to be replaced, latest after 1,000 sterilization cycles. MELAstore permanent filter 01193 36.- for use with MELAstore-Box 100 and MELAstore-Box 200 (Packaging unit: 2 pieces) MELAstore permanent filter MELAstore disposable paper filters l according pean standard EN 868-2 The MELAstore disposable paper filters are designed for the use in the MELAstore-Box 100 and in the MELAstore-Box 200. For each sterilization cycle a new paper filter is inserted into the lid of the MELAstore-Box. MELAstore disposable paper filter 01194 19.- for use with MELAstore-Box 100 and MELAstore-Box 200 (Packaging unit: 100 pieces) MELAstore disposable paper filter MELAstore disposable seal l with or without process indicator For an easy and safe sealing of the MELAstore-Boxes and the MELAG sterilization containers. The disposable seals are available with or without a process indicator. MELAstore disposable seal 01198 13.- without process indicator. Packaging unit: 100 pieces Disposable seal without indicator MELAstore disposable seal 01199 16.- with process indicator. Packaging unit: 100 pieces Disposable seal with indicator MELAstore holder for identification plate for MELAstore-Tray This holder is fixed at the lid of a MELAstore-Tray. The identification plate (order no. 01195) can be inserted into this holder. MELAstore holder for identification plate 01197 11.- for fitting on the MELAstore-Tray 50, 100 and 200 MELAstore identification plate MELAstore-Tray / MELAstore-Box This identification plate can be printed with a text of up to 15 characters and / or additionally with a barcode. The identification plates will be printed as requested by the practice. The identification platewill be inserted into the holder of a MELAstore-Box or into the holder for an identification plate (order no. 01197) at the MELAstore-Tray. MELAstore identification plate 01195 10.- incl. printing of up to 15 characters and additionally barcode MELAstore identification plate tall for MELAstore -Box The extra-tall identification plate (not labelled) is for affixing the labels of a label-printer, e. g. the MELAprint 60. This identificaion plate will be inserted into the holder of a MELAstore-Box. MELAstore identification plate tall 01196 26.- for use with MELAstore-Box 100 and MELAstore-Box 200 (Packaging unit: 10 pieces) Holder for identification plate Identification plate with characters and barcode Identification plate tall with label of MELAprint 60 Sealing devices/ Packagings Documentation Water treatment

Page 26 Sealing devices / Packagings MELAG MELAseal Pro l The validatable rotary sealer with documentation The rotary sealer MELAseal Pro is designed for practices needing to seal and document large numbers of packages. MELAseal Pro is validatable according to EN 11607-2. Two minutes after being switched on, MELAseal Pro is ready for use. Packages (e.g. MELAfol ) can be sealed without pause. Documentation is possible via the serial interface using MELAflash, MELAprint 42, or through connection to the practice PC. You can find further information in this price list under documentation. MELAseal Pro 10010 2,175.- Working table comfort 00118 540.- Working table standard 00119 222.- Reel dispenser (for wall-mounting, with cutting device) 00116 444.- Foot for the reel dispenser 71490 23.- (for mounting the reel dispenser on the table top) MELAseal Pro Working table comfort Working table standard Reel dispenser MELAseal 200 l validatable sealing device with documentation The newly-developed sealing device combines the reliable technology of the highly-popular MELAseal 100+ with the ease and functionality of a rotary sealing device. And above all - it is validatable! Ready to operate only 90 seconds after activation. The transparent sterilization packaging (e.g. MELAfol) can be sealed safely without pause in only two seconds. All functions of the MELAseal 200 and the parameters of the seal seam are showed on the integrated display. MELAseal 200 comes equipped with two USB interfaces for documentation with the USB-Stick included in the scope of the delivery or via connection to a PC. Four different reel dispensers are available for different space situations. These can be secured to the MELAseal 200 sealing device. The reel dispenser standard locates the rolls on the rear of the device. The reel dispensers comfort, Deluxe and the wall mounted reel dispenser hang the MELAfol above the sealing device, thereby saving space. The reel dispenser Deluxe is also fitted with a feed deviceto enable feeding of the MELAfol rolls via a hand wheel. MELAseal 200+ with Reel dispenser Deluxe Sealing devices/ Packagings MELAseal 100+ l Sealing device MELAseal 100+ is a continuously heated sealing device for the sealing of see-through sterilization packaging such as MELAfol. It is ready to operate after only a short heating time of 2 minutes. An energy-saving mode enables stand-by operation. All operating states of the MELAseal 100+ are indicated by a colour-changing LED. Four different reel dispensers are available for different space situations. These can be secured to the MELAseal 100+ sealing device or at the wall. MELAseal 200 (delivery incl. USB-Stick) 10120 1.165,- USB-Stick for the documentation of the sealing cycles 19901 43,- USB-Kabel, to connect the MELAseal 200 to the practice-pc (length: 1.8 metres) 19902 15,- Reel dispenser Deluxe 00108 310,- Reel dispenser komfort 00111 89,- Reel dispenser standard 00117 69,- Reel dispenser wall-mounted 00106 64,- MELAseal 100+ with Reel dispenser comfort MELAseal 100+ 10211 655,- Reel dispenser Deluxe 00108 310.- Reel dispenser komfort 00111 89.- Reel dispenser standard 00117 69.- Reel dispenser wall mounted 00106 64.- MELAseal 100+ with Reel dispenser standard

MELAG Sealing devices / Packagings Page 27 MELAfol l See-through sterilization package according EN 868-5 Available in rolls, or as individual bags. With an indicator that turns from rose to brown during sterilization. Reels (Width x Length) MELAfol 502 (5cm x 200m) 00502 47.- MELAfol 752 (7.5cm x 200m) 00752 57.- MELAfol 1002 (10cm x 200m) 01002 68.- MELAfol 1502 (15cm x 200m) 01502 93.- MELAfol 2002 (20cm x 200m) 02002 114.- MELAfol 2502 (25cm x 200m) 02502 142.- Pouches (Width x Length) MELAfol 501 (5cm x 25cm), 1000 Stück 00501 57.- MELAfol 751 (7.5cm x 25cm), 1000 Stück 00751 69.- MELAfol 1001 (10cm x 25cm), 1000 Stück 01001 85.- Pouches with fold (Width x Length) 02051 99.- MELAfol 2051 (20cm x 50cm), 100 pieces for sealing standard-tray-cassettes Foil holder For sterilizing instruments sealed in MELAfol upright for better drying results. For autoclaves 29 VS+ / 30 B+ / 31 B+ / 40 B+ / 41 B+ 22410 97.- For autoclaves 23 VS+ / 23 B+ / 24 B+ / 43 B+ / 44 B+ 22420 97.- For autoclaves MELAtronic 23EN 00283 74.- For autoclaves MELAtronic 15EN+ 70670 70.- MELAfol reels and bags Foil holder MELAG seal check l routine control of sealing devices For the weekly verification of the quality of the seal seam. MELAG seal check, 100 test strips 01079 48.- MELAG seal check Sterilization containers according to pean standard EN 868-8 The MELAG sterilization containers consist of a lower part made of anodized aluminium and an upper part of stainless steel. The base and lid of the sterilization containers are perforated and fitted with single-use paper filters. 100 single-use paper filters are included in the scope of delivery. Type Outer dimensions (Length x Width x Height, cm) 15K 18 x 12 x 4.5 01151 135.- 15M 35 x 12 x 4.5 01152 184.- 15G 35 x 12 x 8.0 01153 219.- 17K 20 x 14 x 5.0 01171 158.- 17M 41 x 14 x 5.0 01172 206.- 17G 41 x 14 x 9.0 01173 227.- 23M 42 x 16 x 6.0 01231 257.- 23G 42 x 16 x 12.0 01232 273.- 28M 32 x 16 x 6.0 01284 218.- 28G 32 x 16 x 12.0 01285 257.- Type K Type M Type G Sealing devices/ Packagings Paper filter for sterilization containers according to pean standard EN 868-2 A new paper filter for the base and lid of the sterilization container are required for each sterilization cycle. Single-use paper filters Dimensions (100 pieces) (Length x Width, cm) For sterilization container 15K 11.5 x 10.5 27325 20.- For sterilization container 15M / 15G 29.5 x 10.5 27335 20.- For sterilization container 17 K 13.0 x 12.0 27345 20.- For sterilization container 17M / 17G 35.5 x 12.5 27355 20.- For sterilization container 23M / 23G 35.2 x 13.2 26515 20.- For sterilization container 28M / 28G 24.2 x 14.0 27365 20.- Single-use paper filters, 100 pieces Documentation Water treatment

Page 28 Documentation MELAG MELAtrace l The software for documentation, clearance and traceability MELAtrace fulfils the stipulations of a complete documentation in an easy, safe and paperless way. Operating MELAtrace is intuitive and links the single steps of instrument proccesing in a washerdisinfector with the sterilization cycles to ensure a complete and comprehensive documentation. MELAtrace documents the loading of MELAtherm, MELAG autoclaves and the DAC Universal with freely selectable loading elements (e.g. instrument sets with MELAstore or single instruments). With only some clicks the clearance of the process cycles is done and the printing of barcode labels with MELAprint 60 for the marking and traceability of wrapped sterile goods can be executed. All process-steps, treatment protocols and clearances will be documented and archieved complete and safe: MELAtrace also creates a processing protocol with all information as a forgery-proof PDF-file. Main menu of MELAtrace MELAtrace Software for documentation and traceability (inclusive Installation-DVD, manual and license code) 21138 1,085.- Network cable for connecting the MELAprint 60 to Premium-Plus-Class autoclaves or the Cliniclave 45 and connection of the MELAnet Box to a RJ45 network socket, length 1.5 meter (Type: 1:1) 15812 19.- Network cable, length 2 meter (type: crossover) 15813 22.- Network cable, length 5 meter (type: crossover) 15814 24.- Network cable, length 10 meter (type: crossover) 15815 27.- Fast Ethernet switch (5 ports, 10/100 Mbit) 76600 43.- Null modem cable, 5 meters, 9-pin, SUB-D 15810 26.- Serial interface cable for DAC Universal 15821 27.- USB-Serial-Adapter to connect a MELAG autoclave with serial interface or MELAseal Pro to an USB-interface to the practice-pc 80270 28.- USB-cable to connect MELAseal 200 to a PC (length: 1.8 Meter) 19902 15.- Clearance with MELAtrace Label printing with MELAtrace MELAprint 60 l Bar code label printer When using a PC running MELAtrace or connected to a Premium-Plus-Class autoclave/cliniclave 45, labels are printed using MELAprint 60 after clearance of the sterilized equipment. These are then stuck to the packaging of the sterilized equipment. The labels provide information regarding the serial number of the MELAG device, the date of sterilization, the expiry date of the sterilized equipment and the person issuing clearance. MELAprint 60 Bar code label printer (Delivered incl. mains cable, network cable (2m) and one reel labels) 01160 785.- Labels for MELAprint 60 6 reels à 1.000 labels, white, twice sticking (for the manual documentation) 41942 170.- Labels for für MELAprint 60 6 reels à 1.000 labels, blue, once sticking (for the automatic documentation) 41943 148.- MELAprint 60 Documentation MELAflash / MELAnet l For the automatic documentation Documentation by hand is very time-consuming: automatic documentation is much more economical. The autoclaves of the Pro-Class, S-Class, MELAquick 12+, MELAtronic and Cliniklav 25 can be connected to the MELAflash CF-Card-Printer or network connection via the MELAnet Box. Users of Premium-Plus-Class autoclaves, Clinclave 45 and the washer-disinfector MELAtherm 10 do not require a MELAflash CF-Card-Printer or a MELAnet Box, because they have a built-in CF-Card-slot and are ready for networking. MELAflash CF-Card-Printer connected to the serial interface of Pro-Class, S-Class, MELAquick 12+ and MELAtronic EN (including CF-Card and CF-Card reader) 01039 605.- MELAnet Box to connect an autoclave of the Pro-Class, S-Class, MELAquick 12+ and Cliniklav 25 to the practice network (incl. mains supply, network cable 2m, RS232-Kabel) 40296 595.- CF-Card-Printer with CF-Card MELAnet Box MELAflash CF-Card MELAflash CF-Card 01043 40.- MELAflash Card reader 01048 40.- MELAflash Card reader

MELAG Documentation Page 29 Barcode hand scanner The barcode hand scanner is connected to an USB port of the practice-pc. This highly compact hand scanner is for reading-in the barcodes of the MELAstore-Trays or MELAstore-Boxes to MELAtrace for linking the load to a cycle of MELAtherm or to an autoclave. With this hand scanner you also can read the barcode labels of MELAprint 60 to link these information to the patient records. Barcode hand scanner Delivery including a holder 01110 132.- Barcode-Handscanner MELAprint 42 l Log printer The log printer MELAprint 42 can be connected to the serial initerface all autoclaves of the Pro-Class, the S-Class, the MELAquick 12+ and the Cliniklav 25, but also to the sealing device MELAseal Pro. The log printer serves the documentation and archiving of the sterilization cycles. A network adapter is required to connect the MELAprint 42 to the autoclaves of the Premium-Plus- Class and to the Cliniclave 45 or to the washer disinfector MELAtherm 10. MELAprint 42 Log printer (delivered incl. power supply unit, weiral data cable, ink ribbon and 1 paper reel) 01042 595.- MELAprint 42 Network adapter is required when MELAprint 42 is connected to an autoclave of the Premium- Plus-Class, the Cliniclave 45 or to MELAtherm 10 (incl. network cable, 1,5m) 40295 93.- Network adapter MELAdoc l Label printer for sterilization packaging The labels are affixed to the sterilization packaging following successful sterilization; they serve the labelling and clearance. They include information regarding: Sterilization date, expiry date,the person issuing clearance and the sterilization cycle batch numbers. MELAdoc Label printer (delivered with an ink pad and 1 reel of 750 labels) 01095 419.- 6 reels of 750 labels each (incl. 1 ink pad), Language: German 01096 51.- 6 reels of 750 labels each (incl. 1 ink pad), Language: English 01097 51.- MELAdoc 6 reels of 750 labels each (incl. 1 ink pad), Language: French 01098 51.- 6 reels of 750 labels each (incl. 1 ink pad), Language: Italian 01099 51.- MELAcontrol and MELAcontrol PRO l The MELAG batch control systems MELAcontrol and MELAcontrol PRO are test bodies in accordance with EN 867-5 for batch control and the functional check of class B autoclaves and Cliniklav 25 / Cliniclave 45. Both test systems facilitate a secure evaluation of the sterilization process. With MELAcontrol the 250 test strips are always delivered with a new test body. With MELAcontrol PRO the test bodies need only be purchased once; the test strips can be reordered cheaply. MELAcontrol Practice-set contains 1 test body (helix) and 250 test strips 01080 165.- MELAcontrol Documentation MELAcontrol PRO contains a test body and 40 indicator strips 01075 210.- MELAcontrol PRO Refill pack contains 250 indicator strips and a lid seal 01076 150.- MELAcontrol PRO Water treatment

Page 30 Water treatment MELAG Water stop valve For installation of a water-treatment system, or an autoclave with permanent water connection, we also recommend installation of this water stop valve. To prevent water damage, this unit interrupts the flow of water in case of malfunction. Water stop valve 01056 145.- Additional sensor 22432 63.- MELAtest 60 l Test device for feed water quality For checking the quality of the feed water (aqua dem) to be used for an autoclave. It prevents damage to your autoclave and to your instruments. MELAtest 60 (incl. batteries) 01060 119.- Bacteria filter for MELAdem 47 and MELAdem 55 A permissible bacterial load is already present in drinking water. Bacteria levels increase with the time spent unused in the water pipes. The multiplication of bacteria necessitates a bacteria filter. Installed between the water treatment unit MELAdem 47 or MELAdem 55 and the autoclave, the micro-fine bacteria filter significantly reduces the amount of bacteria found in the water. In doing so, the quality of the feed water is increased considerably. Test results prove the effectiveness of the bacteria filter over the period of at least a year. Starter set bacteria filter for the Vacuklav (incl. wall bracket) 74500 975.- Refill pack bacteria filter for the Vacuklav 52035 935.- Starter set bacteria filter for the Cliniklav 25 (incl. wall bracket) 74600 975.- Refill pack bacteria filter for the Cliniklav 25 52036 935.- Connection sets for MELAdem 40 and MELAdem 47 to MELAG autoclaves All sets contain the connections and the hoses for the feed water supply of a MELAG autoclave with demineralized water from a MELAG water treatment system and also the water drain to an existing sifon. The length of the hoses delivered with the sets is 2 meters. Connection set MELAdem 40 to all klav 09031 80.- Connection set MELAdem 40 to 09033 104.- Vacuklav 23 B+ / 31 B+ / 41 B+ / 43 B+ Connection set MELAdem 40 to MELAquick 12+ 09030 22.- Connection set MELAdem 47 to all klav 09032 51.- Connection set MELAdem 47 to 09034 73.- Vacuklav 23 B+ / 31 B+ / 41 B+ / 43 B+ PE-hose (black), 6mm, per meter 28820 3.- Long hoses for the water connections of MELAG autoclaves and MELAtherm If a long hose is required to connect a MELAG product to the water supply or to the water drain, we also provide 5 metre hoses. Tap-water supply hose EN 1717 24931 62.- with pipe elbow and seals, 5 meters Tap-water supply hose for MELAdem 47 37221 35.- with seals, 5 meters Hose extension for tap-water supply hose 24933 44.- with seals, 3 meters Waste water hose for autoclaves 36585 29.- with seals, 2 meters Waste water hose for autoclaves 36586 31.- with seals, 5 meters Waste water hose for MELAtherm, 4 meters 76410 50.- (replaces the factory-assembled waste water hose) Accessories for water supply / water drain of MELAG autoclaves and MELAtherm To connect a MELAG autoclave to the tap-water, the scope of delivery includes water feed hose, a waste water hose and a double chamber siphon (except Cliniclave 45, delivered with a surface-mounted siphon). Any further accessories required for the installation can be ordered separately. Water treatment Water tap with safety combination 37310 64.- Water tap for connection to an existing angle-type non-return valve 58130 93.- Water tap reduction from 3/4 to 1/4 thread 09037 20.- Y piece for the connection of two consumers to a 37315 19.- water connection (e.g. an autoclave and MELAtherm 10). The Y piece is included in the scope of delivery of the MELAdem 47 and the MELAdem 53 / 53 C. Surface-mounted siphon 37410 65.- Double chamber siphon 26635 46.- Siphon for Cliniclave 45 72420 40.- Double hose clips for the connection of two effluent 37400 33.- hoses to a siphon connection. The double hose clip is included in the scope of delivery of the MELAdem 47

MELAG Water treatment Page 31 MELAdem 47 l Reverse-osmosis system All autoclaves of the Premium-Plus-Class, the Pro-Class, the S-Class and MELAquick 12+ can be connected to a water treatment system for automatic supply of the autoclave with demineralized water. MELAdem 47 is designed to supply a large amount of demineralized water and functions on the principle of reverse osmosis. MELAdem 47 01047 1,350.- (3) (1) Consumables Prefilter (fine filter) 37450 40.- Activated-carbon filter 37460 65.- Mixed-bed resin 37470 40.- MELAdem 47 (1) in a sub-cabinet with storage tank (2) and tap (3) (2) MELAdem 40 l Ion exchanger / MELAjet Spray pistol MELAdem 40 can be connected to all autoclaves of the Premium-Plus-Class, the Pro-Class, the S-Class and MELAquick 12+ and automatically supplies them with demineralized water. The dual chamber system enables a maximum of cartridge yield. MELAdem 40 can be installed in a sub-cabinet, on the wall, or directly at an autoclave. The system also supplies demineralized water through the MELAjet spray pistol for other purposes. The adapters for Luer / Luer-Lock from the accessories of MELAtherm can be screwed onto the water outlet of MELAjet. MELAdem 40 incl. 2 mixed-bed cartridges 01049 420.- Water branch to connect MELAdem 40 to a 37241 35.- MELAG autoclave with tap-water connection MELAdem 40 Mixed-bed resin (consumable, 2 filled cartridges) 61026 48.- Water-quality monitor 45008 240.- For checking the feed water quality. Not required for Vacuklav, klav, MELAquick 12+ and MELAtronic 15EN+ / 23EN beause already integrated in these devices. MELAjet Spray pistol 27300 117.- Delivered incl. holder, connecting parts for MELAG autoclaves and hose, 1.5metres (28820) MELAjet - spray pistol with adapters for Luer / Luer-Lock (to be ordered separately) MELAdem 53 / MELAdem 53 C l Ion exchanger with high capacity MELAdem 53 and MELAdem 53 C (compact) consist of two high-quality stainless steel containers filled with regeneratable resin to supply MELAtherm with demineralized water to prevent residues on the instruments. Once the container has been used up, it is set to regeneration and the second container is brought into operation. MELAdem 53 and MELAdem 53 C can also be used for providing further autoclaves with high-quality demineralized water in combination with MELAtherm. MELAdem 53 C is especially designed for sub-cabinets with low installation height. MELAdem 53 Ion exchanger Ø 24cm x Height: 57cm, 2 containers à 15 litres, filled 01038 1,350.- Regeneration MELAdem 53 (per container) 09020 upon request MELAdem 53 C Ion exchanger Ø 24cm x Height: 45cm, 2 containers à 15 litres, filled 01036 1,310.- Regeneration MELAdem 53 C (per container) 09021 upon request MELAdem 53C MELAdem 53 Water distributor for the MELAdem 53 / MELAdem 53 C The water distributor enables the connection of up to three further devices to the MELAdem 53 or MELAdem 53 C in addition to a MELAtherm 10. For instance, its use would enable the supply of two MELAtherm 10 and two autoclaves with high-quality deionized water from a single cartridge. Water distributor for the connection of up to 4 devices to MELAdem 53 / MELAdem 53 C 69005 177.- Water treatment

Page 32 Disinfectants from MELAG: MELAdes MELAG MELAdes The new hygiene system for your practice MELAdes 600 Hand disinfectant MELAdes 700 Quick surface disinfectant MELAdes 800 Instrument disinfectant MELAdes 801 Drill disinfectant MELAdes Disinfection

MELAG Disinfectants from MELAG: MELAdes Page 33 MELAdes l The new hygiene system The MELAdes series is a fully-integrated hygiene system enabling the disinfection of hands, surfaces, instruments and drill bits. MELAdes 600 l Hand disinfection MELAdes 600 is a ready-to-use, alcohol-based, perfume-free disinfectant for application on skin and hands. The skin-tolerance and activity spectrum of the MELAdes range have been specially adapted to the needs of medical and dental practices. MELAdes 600 Qty per pk 500ml dispenser bottles (solution ready-for-use) 11601 4.00 6 24.- 1000ml dispenser bottles (solution ready-for-use) 11602 7.00 6 42.- 5 litre canister 11603 32.50 2 65.- Wall dispenser for 500ml dispenser bottle 11900 60.- 1 60.- Wall dispenser for 1000ml dispenser bottle 11901 75.- 1 75.- MELAdes 700 l Rapid surface disinfection MELAdes 700 is a weakly alcoholic rapid-working disinfectant for surfaces with a pleasant, fresh aroma and a broad activity spectrum. Its aldehyde-free formula prevents almost all discolourations after application. MELAdes 700 Qty per pk 10 litre canister (solution ready-to-use) 11701 34.- 1 34.- Dispenser bucket for fleece cloth rolls, volume: 3 litres 11702 7.- 1 7.- 3 Fleece cloth rolls à 70 sheets (25 x 25cm) 11703 17.- 1 17.- Spray bottle (empty, volume: 1 litre) with spray nozzle 11706 6.- 1 6.- 1) 1) MELAdes 800 l Instrument disinfection MELAdes 800 is a non-destructive and active instrument disinfection agent (concentrate). The extraordinary cleaning power of MELAdes 800 enables disinfection and cleaning in a single step, thus saving time and money. MELAdes 800 Qty per pk 5 litre canister (concentrate) 11803 47.50 2 95.- Dosing bottle (empty, volume 1 litre) 11802 4.- 1 4.- Instrument bath, volume 3 litres, white 11902 48.- 1 48.- 1) 1) MELAdes 801 l Drill bit disinfection MELAdes 801 is a ready-to-use combination product for the disinfection and cleaning of dental drill bits and other rotating precision instruments. It is characterized by an excellent cleaning power, a broad activity spectrum, effective protection against corrosion and a pleasant smell. MELAdes 801 Qty per pk 5 litre canister (solution ready-for-use) 11811 20.- 2 40.- Burr container, volume 100ml, grey 11905 15.- 1 15.- 1) MELAdes - Accessories Everything that you need for the practical and economic use of MELAdes. MELAdes Accessories Canister tap for 5 litre and 10 litre canister 11903 4.- Dosing pump for 5 litre and 10 litre canister 11904 5.- 1) 1) Key for canister lid, black 11906 4.- 1) Delivery only possible upon order of MELAdes products in canister 1) MELAdes Disinfection

Page 34 Standard-Autoclaves MELAG MELAtronic 23EN l The standard autoclave The modern autoclave MELAtronic 23EN works according to the fractionated gravity system and provides class N and class S sterilization programs. With a digital display, automatic water feed and electronic parameter monitoring, the MELAtronic 23EN conforms to the pean standard EN 13060. This autoclave is also fitted with automatic feed water quality monitoring and a settable pre-heating. Documentation can be performed using the MELAflash CF-Card-Printer or the log printer MELAprint 42 via the serial interface. You can find further information in this price list under documentation. MELAtronic 23EN Chamber: depth 45 cm x ø 23 cm, 19 litres. 10523 4,205.- Tray (device holds 5 trays, dim 42 x 19cm) 00230 56.- Foil holder 00283 74.- MELAtronic 15EN+ l Class S with drying These autoclaves have a similar technology to the MELAtronic 23EN. Additional the MELAtronic 15EN+ has an active drying pump to secure the process results, especially when using wrapped instruments. MELAtronic 15EN+ Chamber: depth 38 cm x ø 15 cm, 7 litres. 10615 3,110.- Tray (device holds 3 trays, dim 35 x 12cm) 00150 45.- Foil holder 70670 70.- Standard-tray-cassettes / Swab drums The MELAG standard-tray-cassettes are made of anodized aluminium. The base and lid are perforated and are available either with or without textile filter sheets. The swab drums are made of electro-polished stainless steel and are perforated in the base and lid. They come fitted with textile filter sheets. Outer dimensions (Length x Width x Height, cm) Standard-tray-cassette perforated, with filter cloths 29 x 19 x 4.0 00289 83.- Standard-tray-cassette perforated, without filter cloths 29 x 19 x 4.0 00286 52.- Swab drum 17R perforated, with filter cloths ø 13 x 10.5 00174 166.- Swab drum 23R perforated, with filter cloths ø 18 x 14.0 00233 208.- Standard-tray-cassette Swab drum Standard-Autoclaves

MELAG Dry-heat sterilizers Page 35 Dry-heat sterilizers All MELAG dry-heat sterilizers are equipped with a mechanical fan convection. This means that there is a very good heat interchange inside the sterilization chamber, which ensures successful sterilization. The units Sterilisator 75 and Sterilisator 205 are equipped in standard version with Mount 1 for holding 2 trays (Sterilisator 75) or 6 trays (Sterilisator 205). As alternative, the units can also be delivered with Mount 2, also designed for holding unperforated aluminium cassettes. These cassettes store sterilized items and protect them from contamination. When ordering, please indicate if you wish Mount 1 or Mount 2. 2 Mounts: Sterilizer 75 volume 4.3 Litres Dimensions (W x H x D): Outside 31 x 26 x 37.5cm, 00075 595.- Inside 18 x 7.4 x 29.5cm mount 1 59030 Tray (device holds 2 trays, dim. 29 x 19cm) 02075 43.- Cassette (device holds 1 cassette, dim. 29 x 19 x 4cm) 00287 52.- Sterilizer 75 mount 2 59040 2 Mounts: Sterilizer 205 volume 14 Litres Dimensions (W x H x D): Outside 31 x 38.5 x 50.5cm, 00205 985.- Inside 19 x 20 x 36cm mount 1 60030 Tray (device holds 6 trays, dim. 36 x 18cm) 02000 43.- Cassette (device holds 3 cassettes, dim. 29 x 19 x 4cm) 00287 52.- Sterilizer 205 mount 2 60040 Sterilizer 255 volume 21 Litres Dimensions (W x H x D): Outside 62 x 39 x 32cm, 10255 1,198.- Inside 50 x 20 x 21cm Tray (device holds 6 trays, dim. 42 x 18cm) 02003 43.- Sterilizer 255 Dry-heat sterilizers

The price list is valid as of 1. March 2017. All prices are net prices, without packing, ex works Berlin. All prices are valid for devices with power rating: 230V / 50.. 60Hz, except Cliniclave 45 / Cliniclave 45M and MELAtherm 10DTA: Power rating 400V / 50Hz. Other ratings on request. Please request the terms of business for the particular country in which you are interested. Please place your order with article description and order number. Subject to technical changes and misprints. The system is the solution. Hygiene experts are clear: instruments must be treated with perfectly aligned procedures. MELAG offers hygiene as system: Ergonomic, safe, quick and economical. MELAtrace The perfect software for documentation of the entire instrument processing MELAprint Labeling / Tracking Sterile storage Treatment Vacuklav Sterilization / Release Cleaning / Disinfection / Drying / MELAtherm 10 Wrapping MELAseal / MELAstore Care Inspection MELAdem Water treatment, for parallel supply of autoclave and washer / disinfector MELAG Medical technology Geneststraße 6-10 D - 10829 Berlin Rev.: 6-17/0136 01.17.0.5GB-GD-PL_2017_GB phone: +49 30 75 79 110 fax: +49 30 75 79 11 99 mail: info@melag.com Internet: www.melag.com MELAG