Product Guide 2017-18 Lighting Control Building Control System Integration
What is KNX THE WORLDWIDE STANDARD In order to transfer control data to all building management components, a system is required that does away with the problems of isolated devices by ensuring that all components communicate via one common language: in short, a system such as the manufacturer and application domains independent KNX Bus. This standard is based upon more than 24 years of experience in the market, amongst others with predecessor systems to KNX: EIB, EHS and BatiBUS. Via the KNX medium to which all bus devices are connected (twisted pair, radio frequency, power line or IP/Ethernet), they are able to exchange information. Bus devices can either be sensors or actuators needed for the control of building management equipment such as: lighting, blinds / shutters, security systems, energy management, heating, ventilation and airconditioning systems, signalling and monitoring systems, interfaces to service and building control systems, remote control, metering, audio / video control, white goods, etc. All these functions can be controlled, monitored and signalled via a uniform system without the need for extra control centres. Lighting Appliances Security Energy Management Surveillance System AV Control Blind Control Calculation Remote Control HVAC IAUTOMATION KNX PRODUCTS AND SYSTEM INTEGRATION All iautomation products and systems, regardless of brand, are compatible with the KNX open communication protocol. There are some 300 signatories to the KNX protocol, including many of the world s most distinguished manufacturers; HDL, Bosch, Philips, Schneider Electric, Siemens, Somfy and Toshiba, to name a few. The inter-connectivity of products from KNX member firms is highly prized by our clients, who value the expanded design options and reliability delivered by a single shared protocol. Staffed by highly qualified programmers & electrical engineers, iautomations KNX division have been responsible for the design and delivery of lighting & building control systems for many high profile projects including C8 Docklands, Department of Education & Early Childhood (DEECD), & The Australian Institute of Architects 41X building, to name a few. BUILDING MANAGEMENT SYSTEMS Whether in a single-family house or in an office complex, the demand for comfort and versatility in the management of airconditioning, lighting and access control systems is growing. At the same time, the efficient use of energy is becoming increasingly important. More convenience and safety coupled with lower energy consumption can however only be achieved by intelligent control and monitoring of all products involved. This however implies more wiring, running from the sensors and actuators to the control and monitoring centres. Such a mass of wiring in turn means higher design and installation effort, increased fire risk and soaring costs. 2 iautomation - Products Catalogue
Product Index KNX Product Index Projects 3-4 Dimming 6-9 HVAC Dry Contact Input DMX 10 Output modules 11-13 System Components IR Emitter 14-15 Mechanisms Switches 16-20 Touch panels 21-23 Sensors Accessories 24-27 iautomation - Products Catalogue 3
Image Credit Austr 4 iautomation - Products Catalogue
iautomation KNX Projects Established in 2005, to provide non-vendor specific building automation solutions utilising KNX Building Control Bus technology, iautomation is one of the most experienced KNX Systems provider in Australia, having designed and commissioned well over 300 projects in the commercial, industrial, educational and healthcare sectors over the last 10 years. We are proud to share with you some of the projects we have been involved during this time. Australian Institute of Architects ABC Studios Aqualink Alexandra Hospital Bethany Church Budda Bodhivana Monastery C8 Lifestyle Working DHL Canon Doncaster BMW Bodyshop DEECD Relocatable Buildings Eastern Golf Club Ice house Kangan Batman Tafe Kew Golf Club Myer Melbourne Monash University My 80 Northern Hospital Northern Beaches Christian School NAB Mount Waverley Parkville Neuroscience Peter Doherty Institute Royal Melbourne Hospital RMIT The University of Melbourne Victorian Archive Centre Werribee Sports and Fitness Centre ralian Institute of Architects (AIA) iautomation - Products Catalogue 5
Dimming HDL-KNX M/W02.10.1 Order Code: 50039 HDL KNX Shutter Actuator with Manual Operation, 2-fold, 230 V AC, 10A MDRC As a dedicated curtain controller, the M/W02.10.1 is able to control each motor of a curtain controller via its relay function. The unit also has a settable curtain running time, inching control, limit position control, 10A relay for switching forward/reverse running control or stop on every output channel and manual buttons. Functions include: Blinds operation mode, Curtain operation mode, Manual operation, Priority setup, Status can be set when Power off or Power on, Forced position operation, Limit position control, Status response for position, Status for operation, Scene control, Safety control, Automatic control. HDL-KNX / Code: M/W04.10.1 Order Code: 50040 HDL KNX Shutter Actuator w- Manual Operation, 4-fold, 230 V AC, 10A MDRC As a dedicated curtain controller, the M/W04.10.1 is able to control each motor of a curtain controller via its relay function. The unit also has a settable curtain running time, inching control, limit position control, 10A relay for switching forward/reverse running control or stop on every output channel and manual buttons. Functions include: Blinds operation mode, Curtain operation mode, Manual operation, Priority setup, Status can be set when Power off or Power on, Forced position operation, Limit position control, Status response for position, Status for operation, Scene control, Safety control, Automatic control. HDL-KNX M/W06.10.1 Order Code: 50041 HDL KNX Shutter Actuator w- Manual Operation, 4-fold, 230 V AC, 10A MDRC As a dedicated curtain controller, the M/W046.10.1 is able to control each motor of a curtain controller via its relay function. The unit also has a settable curtain running time, inching control, limit position control. 10A relay for switching forward/reverse running control or stop on every output channel and it has manual buttons. Functions include: Blinds operation mode, Curtain operation mode, Manual operation, Priority setup, Status can be set when Power off or Power on, Forced position operation, Limit position control, Status response for position, Status for operation, Scene control, Safety control, Automatic control. 6 iautomation - KNX Products Catalogue
Dimming HDL-KNX / Code: M/D01.1 Order Code: 50078 HDL KNX Universal Dim Actuator, 1x6A, MDRC The HDL KNX M/D01.1 is a MOSFET dimmer which supports both leading edge and trailing edge dimming. Control over inductive, resistive, and capacitive loads is possible, or the modules on-board manual buttons. Functions include: Dimming for 1 channel independent load & parallel channels to form a larger current output. Dimmers may be used for dimming ordinary incandescent lamps, low voltage halogen lamps and other light sources which support leading or trailing edge technology. Statistics total ON time, Status respone, Status recovery, Over temperature protection, Read temperature, Over temperature alarm, Staircase light, Flashing light, Scene control, Scene dimming, Sequence control, Threshold control, Heating actuator (PWM). Short circuit protection, over load protection, over Heat protection. HDL-KNX / Code: M/D02.1 Order Code: 50079 HDL KNX Universal Dim Actuator, 2x3A, MDRC The HDL KNX M/D02.1 is a MOSFET dimmer which supports both leading edge and trailing edge dimming. Control over inductive, resistive, and capacitive loads is possible, or the modules on-board manual buttons. Functions include: Dimming for 2 channel independent load & parallel channels to form a larger current output. Dimmers may be used for dimming ordinary incandescent lamps, low voltage halogen lamps and other light sources which support leading or trailing edge technology. Statistics total ON time, Status respone, Status recovery, Over temperature protection, Read temperature, Over temperature alarm, Staircase light, Flashing light, Scene control, Scene dimming, Sequence control, Threshold control, Heating actuator (PWM). Short circuit protection, over load protection, over Heat protection. HDL-KNX / Code: M/D04.1 Order Code: 50080 HDL KNX Universal Dim Actuator, 4x1.5A, MDRC The HDL KNX M/D04.1 is a MOSFET dimmer which supports both leading edge and trailing edge dimming. Control over inductive, resistive, and capacitive loads is possible, or the modules on-board manual buttons. Functions include: Dimming for 4 channel independent load & parallel channels to form a larger current output. Dimmers may be used for dimming ordinary incandescent lamps, low voltage halogen lamps and other light sources which support leading or trailing edge technology. Statistics total ON time, Status respone, Status recovery, Over temperature protection, Read temperature, Over temperature alarm, Staircase light, Flashing light, Scene control, Scene dimming, Sequence control, Threshold control, Heating actuator (PWM). Short circuit protection, over load protection, over Heat protection. iautomation - KNX Products Catalogue 7
Dimming HDL-KNX / Code: M/D06.1 Order Code: 50081 HDL KNX Universal Dim Actuator, 6x1A, MDRC The HDL KNX M/D06.1 is a MOSFET dimmer which supports both leading edge and trailing edge dimming. Control over inductive, resistive, and capacitive loads is possible, or the modules onboard manual buttons. Module include dimming for 6 channel independent load & parallel channels to form a larger current output. Dimmers may be used for dimming ordinary incandescent lamps, low voltage halogen lamps and other light sources which support leading or trailing edge technology. Functions include: Statistics total ON time, Status respone, Status recovery, Over temperature protection, Read temperature, Over temperature alarm, Staircase light, Flashing light, Scene control, Scene dimming, Sequence control, Threshold control, Heating actuator (PWM). Short circuit protection, over load protection, over Heat protection. HDL-KNX / Code: M/DA6.10.1 Order Code: 50068 HDL KNX Switch/Dim 1-10v Actuator, 6-fold, 10 A, MDRC The M-DA6.10.1 is ballast dimming and relay output unit, which is capable of controlling multiple load types via its 6 output channels. The module comes with a dedicated manual control feature, making instant system manipulation possible. Functions include : Statistical total ON time, Status respone,status recovery, Upper limit, Lower limit, Staircase light, Scene control, Scene dimming, Sequence control, Threshold switch, Heating actuator (PWM). HDL-KNX / Code: M/DL02.1 Order Code: 50082 HDL KNX Leading Edge Dimmer, 2x6A, MDRC M/DL02.1 is a Leading Edge TRIAC Dimmer, which supports both dimming and heating control functions. The module has the capacity to support both inductive and resistive loads, and some capacitive loads such as LED drivers, and electronic ballasts which use leading edge TRIAC dimming. Each channel is also able to be manually controlled via the on board buttons. The dimmers may be used for dimming ordinary incandescent lamps, low voltage halogen lamps and other light sources which support leading edge dimming technology. Functions include: Statistics total ON time, Status response, Status recovery, Over temperature protection, Read temperature, Over temperature alarm, Staircase light, Flashing light, Scene control, Scene dimming, Sequence control, Threshold control, Heating actuator (PWM),1.5 power dimming curve. Short circuit fuse protection, Overload fuse protection, Overheat power reduce. 8 iautomation - Products Catalogue
Dimming HDL-KNX / Code: M/DL04.1 Order Code: 50083 HDL KNX Leading Edge Dimmer, 4x3A, MDRC M/DL04.1 is a Leading Edge TRIAC Dimmer, which supports both dimming and heating control functions. The module has the capacity to support both inductive and resistive loads, and some capacitive loads such as LED drivers, and electronic ballasts which use leading edge TRIAC dimming. Each channel is also able to be manually controlled via the on board buttons. The dimmers may be used for dimming ordinary incandescent lamps, low voltage halogen lamps and other light sources which support leading edge dimming technology. Functions include: Statistics total ON time, Status response, Status recovery, Over temperature protection, Read temperature, Over temperature alarm, Staircase light, Flashing light, Scene control, Scene dimming, Sequence control, Threshold control, Heating actuator (PWM),1.5 power dimming curve. Short circuit fuse protection, Overload fuse protection, Overheat power reduce. HDL-KNX / Code: M/DL06.1 Order Code: 50084 HDL KNX Leading Edge Dimmer, 6x2A, MDRC M/DL06.1 is a Leading Edge TRIAC Dimmer, which supports both dimming and heating control functions. The module has the capacity to support both inductive and resistive loads, and some capacitive loads such as LED drivers, and electronic ballasts which use leading edge TRIAC dimming. Each channel is also able to be manually controlled via the on board buttons. The dimmers may be used for dimming ordinary incandescent lamps, low voltage halogen lamps and other light sources which support leading edge dimming technology. Functions include: Statistics total ON time, Status response, Status recovery, Over temperature protection, Read temperature, Over temperature alarm, Staircase light, Flashing light, Scene control, Scene dimming, Sequence control, Threshold control, Heating actuator (PWM),1.5 power dimming curve. Short circuit fuse protection, Overload fuse protection, Overheat power reduce. iautomation - Products Catalogue 9
HVAC Dry Contact Input DMX HDL-KNX / Code: M/FCU01.10.1 Order Code: 50223 HDL KNX HVAC Controller 5CH 10A Relay, 2CH 0-10V Outputs, Temperature Input The M-FCU01.10 module has two selectable functions, the first being FCU control, and the second being floor heating control. In total the module has 7 channels, and is able to control fan speed, mode, air-conditioner temperature, and floor heating/cooling. Functions include: FCU controller and 7 channels floor heating control, 7 channel digital temperature sensor. Can be configured for 5 channel relay output and 2 channels DC0-10V. Fan speed and valve status report2 channels DC 0-10V for FAN speed or 0-10V valves. HDL-KNX / Code: M/S04.1 Order Code: 50035 HDL KNX Universal Interface, 4-fold, FM The HDL KNX M/S04 supports 4 Dry Contact input channels, coupled with a temperature sensor, and can output 4 dimming channels or provide LED status indication. The module is able to support three work modes that enable a diverse range of targets to be controlled. Sensor control mode enables 4 dry contact channels, or 4 temperature channels, to connect to other devices and control them. 4 channels of LED indicators outputs show the status. Logic control mode enables 4 logic input channels with AND, OR & NOT logic relations to control various targets. LED indicators outputs show the status of the 4 channels. Dimming control mode enables the manual input of 4 channels and 4 dimming channels output. These channels work with a 0-10V dimmer to control various lighting devices. HDL-KNX / Code: M/DMX512.1 Order Code: 50028 HDL KNX DMX Recorder As a DMX recorder the module has the ability to record scenes from DMX resources, and then play the scene back enabling the control of various DMX devices, such as moving head lighting, and LED lighting etc. The unit can automatically record, play, or delete files, and has single play or repeat play modes. The DMX Recorder has three work modes, DMX recorder mode, DMX dimming( EIB to DMX) mode and DMX to EIB(1bit,1byteData Point) mode. Support recording from DMX line or Art-Net, DMX recorder mode can store and playback 24 programs. The time of each program can reach 4 hours. DMX dimming mode supports Max. 48 channels of switching and dimming via EIB which allows you to control the DMX device from KNX system. DMX to EIB mode supports a Max. 48 channels of switching and absolute dimming via DMX signal. This allows you to control KNX system from DMX memory console. Other functions include: DMX output for LED color changing, DMX dimming and Moving head, Laser and other DMX control. DMX input control functions for KNX include switch control, sequence control, scene control, Relative dimming, Absolute dimming. 10 iautomation - Products Catalogue
Output Modules HDL-KNX / Code: M/R04.10.1 Order Code: 50044 HDL KNX Switch Actuator, 4-fold, 10 AX, MDRC The HDL KNX M/R4.10.1 relay module can supply 4 channels with a current of 10A. This module is able to support diversified devices, and can be applied to any solution which requires switching control. The switch actuators can drive for 4 channels loads. The maximum 10A on every output channel. Functions include: Statistical ON time, Status response, Status Recovery, Staircase light, Flashing, ON/OFF delay, Protection delay, Scene Control, Threshold Function, Curtain Control, Manual Buttons. Logic function: AND, OR, XOR, Gate. Heating function: PWM(1bit/1byte) control output. HDL-KNX / Code: M/R08.10.1 Order Code: 50045 HDL KNX Switch Actuator, 8-fold, 10 AX, MDRC The HDL KNX M/R8.10.1 relay module can supply 8 channels with a current of 10A. This module is able to support diversified devices, and can be applied to any solution which requires switching control. The switch actuators can drive for 8 channels loads. The maximum 10A on every output channel. Functions include: Statistical ON time, Status response, Status Recovery, Staircase light, Flashing, ON/OFF delay, Protection delay, Scene Control, Threshold Function, Curtain Control, Manual Buttons. Logic function: AND, OR, XOR, Gate. Heating function: PWM(1bit/1byte) control output. HDL-KNX / Code: M/R12.10.1 Order Code: 50046 HDL KNX Switch Actuator, 12-fold, 10 AX, MDRC The HDL KNX M/R12.10.1 relay module can supply 12 channels with a current of 10A. This module is able to support diversified devices, and can be applied to any solution which requires switching control. The switch actuators can drive for 12 channel loads. The maximum 10A on every output channel. Functions include: Statistical ON time, Status response, Status Recovery, Staircase light, Flashing, ON/OFF delay, Protection delay, Scene Control, Threshold Function, Curtain Control, Manual Buttons. Logic function: AND, OR, XOR, Gate. Heating function: PWM(1bit/1byte) control output. iautomation - Products Catalogue 11
DIMMING Output Modules HDL-KNX / Code: M/R16.10.1 Order Code: 50047 HDL KNX Switch Actuator, 16-fold, 10 AX, MDRC The HDL KNX M/R16.10.1 relay module can supply 16 channels with a current of 10A. This module is able to support diversified devices, and can be applied to any solution which requires switching control. The switch actuators can drive for 16 channels loads. The maximum 10A on every output channel. Functions include: Statistical ON time, Status response, Status Recovery, Staircase light, Flashing, ON/OFF delay, Protection delay, Scene Control, Threshold Function, Curtain Control, Manual Buttons. Logic function: AND, OR, XOR, Gate. Heating function: PWM(1bit/1byte) control output. HDL-KNX / Code: M/R04.16.1 Order Code: 50048 HDL KNX Switch Actuator, 4-fold, 16 AX, MDRC The M/R4.16.1 KNX relay module can supply 4 channels with a current of 16A.Manual channel control is enabled via the modules on-board buttons, this module is able to support diversified devices, and can be applied in to any solution which requires switching control. The switch Actuators can drive for 4 channels loads. The maximum 16 A on every output channel, also can manually operation. Functions include: Statistical ON time, Status response, Status Recovery, Staircase light, Flashing, ON/OFF delay, Protection delay, Scene Control, Threshold Function, Curtain Control, Manual Buttons. Logic function: AND, OR, XOR, Gate. Heating function: PWM(1bit/1byte) control output. HDL-KNX / Code: M/R08.16.1 Order Code: 50049 HDL KNX Switch Actuator, 8-fold, 16 AX, MDRC The M/R8.16.1 KNX relay module can supply 8 channels with a current of 16A.Manual channel control is enabled via the modules on-board buttons, this module is able to support diversified devices, and can be applied in to any solution which requires switching control. The switch Actuators can drive for 8 channels loads. The maximum 16 A on every output channel, also can manually operation. Functions include: Statistical ON time, Status response, Status Recovery, Staircase light, Flashing, ON/OFF delay, Protection delay, Scene Control, Threshold Function, Curtain Control, Manual Buttons. Logic function: AND, OR, XOR, Gate. Heating function: PWM(1bit/1byte) control output. 12 iautomation - Products Catalogue
Output Modules HDL-KNX / Code: M/R12.16.1 Order Code: 50050 HDL KNX Switch Actuator, 12-fold, 16 AX, MDRC The M/R12.16.1 KNX relay module can supply 12 channels with a current of 16A.Manual channel control is enabled via the modules on-board buttons, this module is able to support diversified devices, and can be applied in to any solution which requires switching control. The switch Actuators can drive for 12 channelloads. The maximum 16 A on every output channel. Functions include: Statistical ON time, Status response, Status Recovery, Staircase light, Flashing, ON/OFF delay, Protection delay, Scene Control, Threshold Function, Curtain Control, Manual Buttons. Logic function: AND, OR, XOR, Gate. Heating function: PWM(1bit/1byte) control output. HDL-KNX / Code: M/R16.16.1 Order Code: 50051 HDL KNX Switch Actuator, 16-fold, 16 AX, MDRC The M/R16.16.1 KNX relay module can supply 16 channels with a current of 16A.Manual channel control is enabled via the modules on-board buttons, this module is able to support diversified devices, and can be applied in to any solution which requires switching control. The switch Actuators can drive for 16 channel loads. The maximum 16 A on every output channel. Functions include: Statistical ON time, Status response, Status Recovery, Staircase light, Flashing, ON/OFF delay, Protection delay, Scene Control, Threshold Function, Curtain Control, Manual Buttons. Logic function: AND, OR, XOR, Gate. Heating function: PWM(1bit/1byte) control output. iautomation - Products Catalogue 13
System Components HDL-KNX / Code: M/P960.1 Order Code: 50003 HDL KNX Power Supply, 960 ma, MDRC As a dedicated HDL KNX/EIB power supply module, the M/P 960.1 is specially designed to provide a maximum of 960mA at 30 volts. This ensures that the optimum power supply is delivered to the HDL KNX/EIB, enabling it to function faultlessly. Features include: Overload protection, short circuit protection. HDL-KNX / Code: M/LCR.1 Order Code: 50010 HDL KNX Line Coupler, MDRC The HDL KNX M/LCR.1 serves as a signal bridge between the KNX mainline and Sub line, or between the mainline and backbone line. Both lines employ galvanic isolation, this ensures that the unit is protected from potential short circuits and corrosion. The module can serve as both a signal amplifier, and a filter for communications traffic. HDL-M/LCR.1, line coupler/repeater is coupling a KNX-TPmainline with a KNX-TP-sub line. It provides galvanic isolation between the two connected lines. The coupler can be used as a line coupler to connect a line to a main line or as a backbone coupler to connect a main line to a backbone line. The main task of M/LCR.1 is filtering the traffic according the installation place in the hierarchy or according to the built in filter tables for group oriented communication. HDL-KNX / Code: M/USB.1 Order Code: 50019 HDL KNX USB Interface, MDRC The HDL KNX M/USB.1 enables a HDL KNX system to utilize a USB interface. The USB interface is able to support the setting of addresses, system parameters, and aid in system commissioning. The devices which are connected to the system can be diagnosed via a PC that utilizes ETS or EITT software. (Other software which is handled by the FALCON driver can also be diagnosed.) The M/USB.1 is a KNX-USB interface for galvanic isolated bidirectional access to the bus line via integrated USB connector for: Commissioning, Addressing, Setting parameters, Visualisation, Protocol, Diagnostic operations on bus devices. With this KNX-USB interface, you have the possibility to address every bus device in the bus system. The communication protocol is used for communication between the PC, USB interface and KNX BUS TP1. The connection between KNX and PC running standard software like ETS, EITT and other software is handled by the FALCON driver. 14 iautomation - Products Catalogue
System Components IR Emitter IA-KNX / Code: IA60232 Order Code: 50029 IA-KNX RS232 Interface The RS232 interface enables communication between the Bus and serial devices. The interface is simply connected to the bus and then connected to devices that support the FT 1.2 protocol, Typically AMX and Crestron systems. HDL-KNX / Code: M/IPRT.1 Order Code: TBC HDL KNX IP Interface, MDRC The MIPRT.1 serve as convertors between the KNX/EIB and Ethernet network. The new KNXnet/IP Routing & Tunneling device offers as router the possibility to temporarily disable filtering of messages by pressing a button. This eases commissioning of the system. The temporary access to other lines is possible without download from ETS. In addition, faulty communication on the bus is indicated through LEDs at the device. HDL-KNX / Code: M/IRAC.1 Order Code: 50026 HDL KNX IR Emitter The M-IRAC.1 is able to store IR codes after they have been learnt by the IR learner. The module can store 650 IR codes, which can then be used to control multitude appliances. Software upgrades to the M-IRAC.1are also possible via the HDL KNX software.hdl-m/irac.1 supports 4 channel infrared interfaces, can store up to 650 infrared codes. 150 IR codes to be used for universal control, such as TV, DVD which has infrared receiving devices. 500 infrared codes to be used for a special AC control, compatible with any brand of AC device, The control modes are ON/OFF control, temperature control, cooling/heating, fan speed control, swing control, etc. The device working mode: Single mode, Repeat mode, Sequence mode, Air-condition control, Current detection. By using the HDL IR Learner to learn the IR codes from the normal remote, and downloaded into IR AC controller by HDL KNX Assistant software, then it can control other IR devices, such as TV, DVD, AC, Amplifier, etc. Building current sensor, to assure the status of device is ON or OFF. Heating Function: PWM(1bit/1byte) control output Heating Function: PWM(1bit/1byte) control output iautomation- Products Catalogue 15
Mechanisms Switches IA-KNX Master Switch Mech / Code: M/AMP.1 Order Code: 50119 KNX-IA LED Master Switch Mechanism, White The KNX-IA LED Master Switch Mechanism is compatible with all standard Australian switch plates and can connect up to 3 Slave Switch Mechanisms. Functions: Supports many kind of data points and functions including Switch control, Shutter control, Flexible control, Scene control, Threshold control, Combination control, String (14 bytes) controller. Each mechanism has an LED indicator, adjustable through the colour spectrum via RGB. Dimensions: 43x23.5mm IA-KNX Slave Switch Mech / Code: M/ASP.1 Order Code: 50120 KNX-IA LED Slave Switch Mechanism, White The KNX-IA LED Slave Switch Mechanism is compatible with all standard Australian switch plates. Requires the KNX-IA Master Switch Mechanism. Functions: Supports many kind of data points and functions including Switch control, Shutter control, Flexible control, Scene control, Threshold control, Combination control, String (14 bytes) controller. Each mechanism has an LED indicator, adjustable through the colour spectrum via RGB. Dimensions: 35x23.5mm IA-KNX Master Switch Mech / Code: M/AMP.2 Order Code: 50133 KNX-IA LED Master Switch Mechanism, Black The KNX-IA LED Master Switch Mechanism is compatible with all standard Australian switch plates and can connect up to 3 Slave Switch Mechanisms. Functions: Supports many kind of data points and functions including Switch control, Shutter control, Flexible control, Scene control, Threshold control, Combination control, String (14 bytes) controller. Each mechanism has an LED indicator, adjustable through the colour spectrum via RGB. Dimensions: 43x23.5mm 16 iautomation - Products Catalogue
Switches IA-KNX Slave Switch Mech / Code: M/ASP.2 Order Code: 50134 KNX-IA LED Slave Switch Mechanism, Black The KNX-IA LED Slave Switch Mechanism is compatible with all standard Australian switch plates. Requires the KNX-IA Master Switch Mechanism. Functions: Supports many kind of data points and functions including Switch control, Shutter control, Flexible control, Scene control, Threshold control, Combination control, String (14 bytes) controller. Each mechanism has an LED indicator, adjustable through the colour spectrum via RGB. Dimensions: 35x23.5mm HDL-KNX / Code: M/P01.2-461 Order Code: 50158 HDL KNX 1 Button Wall Switch Panel, LED Button Indicator, Insert Labelling, White The HDL KNX M/P (01-02-03-04).2-46 series has a backing plate specially designed for the United States, and its icons and fascia can be customized to meet the requirements of end users. The module has large dual control buttons, with each button having LED status indicators. Features include: Built-in mini IR receiver, supports multiple data points and functions, includes Switch control, Dimming, Shutter control, Flexible control, Scene control, Sequence control, Percentage control, Threshold control, Combination control, String(14bytes) controller, Button Lock, Button Trigger, Programming mode. HDL-KNX / Code: M/P01.2-460 Order Code: 50166 HDL KNX 1 Button Wall Switch Panel, LED Button Indicator, Insert Labelling, Black The HDL KNX M/P (01-02-03-04).2-46 series has a backing plate specially designed for the United States, and its icons and fascia can be customized to meet the requirements of end users. The module has large dual control buttons, with each button having LED status indicators. Features include: Built-in mini IR receiver, supports multiple data points and functions, includes Switch control, Dimming, Shutter control, Flexible control, Scene control, Sequence control, Percentage control, Threshold control, Combination control, String(14bytes) controller, Button Lock, Button Trigger, Programming mode. iautomation - Products Catalogue 17
Switches HDL-KNX / Code: M/P02.2-461 Order Code: 50160 HDL KNX 2 Button Wall Switch Panel, LED Button Indicator, Insert Labelling, White The HDL KNX M/P (01-02-03-04).2-46 series has a backing plate specially designed for the United States, and its icons and fascia can be customized to meet the requirements of end users. The module has large dual control buttons, with each button having LED status indicators. Features include: Built-in mini IR receiver, supports multiple data points and functions, includes Switch control, Dimming, Shutter control, Flexible control, Scene control, Sequence control, Percentage control, Threshold control, Combination control, String(14bytes) controller, Button Lock, Button Trigger, Programming mode. HDL-KNX / Code: M/P02.2-460 Order Code: 50168 HDL KNX 2 Button Wall Switch Panel, LED Button Indicator, Insert Labelling, Black The HDL KNX M/P (01-02-03-04).2-46 series has a backing plate specially designed for the United States, and its icons and fascia can be customized to meet the requirements of end users. The module has large dual control buttons, with each button having LED status indicators. Features include: Built-in mini IR receiver, supports multiple data points and functions, includes Switch control, Dimming, Shutter control, Flexible control, Scene control, Sequence control, Percentage control, Threshold control, Combination control, String(14bytes) controller, Button Lock, Button Trigger, Programming mode. HDL-KNX / Code: M/P03.2-461 Order Code: 50162 HDL KNX 3 Button Wall Switch Panel, LED Button Indicator, Insert Labelling, White The HDL KNX M/P (01-02-03-04).2-46 series has a backing plate specially designed for the United States, and its icons and fascia can be customized to meet the requirements of end users. The module has large dual control buttons, with each button having LED status indicators. Features include: Built-in mini IR receiver, supports multiple data points and functions, includes Switch control, Dimming, Shutter control, Flexible control, Scene control, Sequence control, Percentage control, Threshold control, Combination control, String(14bytes) controller, Button Lock, Button Trigger, Programming mode. 18 iautomation - Products Catalogue
Switches HDL-KNX / Code: M/P03.2-460 Order Code: 50170 HDL KNX 3 Button Wall Switch Panel, LED Button Indicator, Insert Labelling, Black The HDL KNX M/P (01-02-03-04).2-46 series has a backing plate specially designed for the United States, and its icons and fascia can be customized to meet the requirements of end users. The module has large dual control buttons, with each button having LED status indicators. Features include: Built-in mini IR receiver, supports multiple data points and functions, includes Switch control, Dimming, Shutter control, Flexible control, Scene control, Sequence control, Percentage control, Threshold control, Combination control, String(14bytes) controller, Button Lock, Button Trigger, Programming mode. HDL-KNX / Code: M/P04.2-461 Order Code: 50164 HDL KNX 4 Button Wall Switch Panel, LED Button Indicator, Insert Labelling, White The HDL KNX M/P (01-02-03-04).2-46 series has a backing plate specially designed for the United States, and its icons and fascia can be customized to meet the requirements of end users. The module has large dual control buttons, with each button having LED status indicators. Features include: Built-in mini IR receiver, supports multiple data points and functions, includes Switch control, Dimming, Shutter control, Flexible control, Scene control, Sequence control, Percentage control, Threshold control, Combination control, String(14bytes) controller, Button Lock, Button Trigger, Programming mode. HDL-KNX / Code: M/P04.2-460 Order Code: 50172 HDL KNX 4 Button Wall Switch Panel, LED Button Indicator, Insert Labelling, White The HDL KNX M/P (01-02-03-04).2-46 series has a backing plate specially designed for the United States, and its icons and fascia can be customized to meet the requirements of end users. The module has large dual control buttons, with each button having LED status indicators. Features include: Built-in mini IR receiver, supports multiple data points and functions, includes Switch control, Dimming, Shutter control, Flexible control, Scene control, Sequence control, Percentage control, Threshold control, Combination control, String(14bytes) controller, Button Lock, Button Trigger, Programming mode. iautomation - Products Catalogue 19
Switches HDL-KNX / Code: M/P01.3 Order Code: 50147 HDL KNX 2 Button Wall Switch Panel, LED Button Indicator, Engraving, Aluminium With a utilitarian aluminium fascia the HDL-M/P(01-02-04).3 is a balance between practicality and avantgarde design. The module comes in 2, 4, or 8 button combinations, and can control multiple targets effortlessly. HDL KNX / EIB multifunction Panel controller are in full compliance with European safety standards and the KNX association protocol. The panels have PC keys with moderate intensity and background lights. It has a built-in mini infrared receiver, with the function of sending the variety data points at the same time that can simultaneously control many different types of KNX equipment. Functions include: Switch control, Dimming, Curtain control, Shutter control, Button Lock, Button Trigger, String control, Flexible control, Scene control, Sequence control, Percentage control, Combination control,1 bytes control,2 bytes control,4 bytes control bytes (String) control. Dimensions: 73x120x9mm HDL-KNX / Code: M/P02.3 Order Code: 50149 HDL KNX 2 Button Wall Switch Panel, LED Button Indicator, Engraving, Aluminium With a utilitarian aluminium fascia the HDL-M/P(01-02-04).3 is a balance between practicality and avantgarde design. The module comes in 2, 4, or 8 button combinations, and can control multiple targets effortlessly. HDL KNX / EIB multifunction Panel controller are in full compliance with European safety standards and the KNX association protocol. The panels have PC keys with moderate intensity and background lights. It has a built-in mini infrared receiver, with the function of sending the variety data points at the same time that can simultaneously control many different types of KNX equipment. Functions include: Switch control, Dimming, Curtain control, Shutter control, Button Lock, Button Trigger, String control, Flexible control, Scene control, Sequence control, Percentage control, Combination control,1 bytes control,2 bytes control,4 bytes control bytes (String) control. Dimensions: 73x120x9mm HDL-KNX / Code: M/P04.3 Order Code: 50151 HDL KNX 2 Button Wall Switch Panel, LED Button Indicator, Engraving, Aluminium With a utilitarian aluminium fascia the HDL-M/P(01-02-04).3 is a balance between practicality and avantgarde design. The module comes in 2, 4, or 8 button combinations, and can control multiple targets effortlessly. HDL KNX / EIB multifunction Panel controller are in full compliance with European safety standards and the KNX association protocol. The panels have PC keys with moderate intensity and background lights. It has a built-in mini infrared receiver, with the function of sending the variety data points at the same time that can simultaneously control many different types of KNX equipment. Functions include: Switch control, Dimming, Curtain control, Shutter control, Button Lock, Button Trigger, String control, Flexible control, Scene control, Sequence control, Percentage control, Combination control,1 bytes control,2 bytes control,4 bytes control bytes (String) control. Dimensions: 73x120x9mm 20 iautomation - Products Catalogue
Touch Panels HDL-KNX / Code: M/DLP04.1-461 Order Code: 50181 HDL KNX DLP Wall Switch Panel, LCD, LED Button Indicator, White With an improved customizable LCD display, the HDL- M/DLP04.1-46 enables users to find information effortlessly. The HDL- M/DLP04.1-46 features a standard US sized backing plate, and 5 buttons. HDL KNX / EIB M/DLP04.1-48,M/DLP04.1-46 wall switch panel controller has 3 page for lighting and curtain control, one page for floor heating, one page for HVAC control. The DLP panels have 160 80 LCD displayer, metal button with rubber keys. Removable face plate. Users can change icon for page 1,2,3 and download to device by HDL KNX Assistant Software. Built- in mini infrared receiver. Functions include: Switch control, Dimming control, Shutter control, Flexible control, Scene control, Sequence control, Percentage control, Threshold control, Combination control, String(14bytes) control, HVAC, Floor heating, IR for AC, Button Lock, Button Trigger, Temperature Display, Time Display, Remote Trigger. HDL-KNX / Code: M/DLP04.1-460 Order Code: 50183 HDL KNX DLP Wall Switch Panel, LCD, LED Button Indicator, Black With an improved customizable LCD display, the HDL- M/DLP04.1-46 enables users to find information effortlessly. The HDL- M/DLP04.1-46 features a standard US sized backing plate, and 5 buttons. HDL KNX / EIB M/DLP04.1-48,M/DLP04.1-46 wall switch panel controller has 3 page for lighting and curtain control, one page for floor heating, one page for HVAC control. The DLP panels have 160 80 LCD displayer, metal button with rubber keys. Removable face plate. Users can change icon for page 1,2,3 and download to device by HDL KNX Assistant Software. Built- in mini infrared receiver. Functions include: Switch control, Dimming control, Shutter control, Flexible control, Scene control, Sequence control, Percentage control, Threshold control, Combination control, String(14bytes) control, HVAC, Floor heating, IR for AC, Button Lock, Button Trigger, Temperature Display, Time Display, Remote Trigger. HDL-KNX / Code: M/TBP2.1-461 Order Code: 50185 HDL KNX 2 Button Touch Panel, RGB Backlight, White The HDL KNX M/TBP(2,4,6).1-46 series has a seamless glass finish, and a backing plate specifically designed for US standard. The module can control multiple targets via its capacitive buttons, which have a customizable RGB LED backlight. The touch panels have touch keys and background lights. KNX Smart has 2,4,6 Buttons wall touch switch panel. Built-in mini infrared receiver, with the function of sending the variety data points at the same time that can simultaneously control many different types of KNX equipment. Functions include: Switch control, Dimming, Scene control, Sequence control, Curtain control, Shutter control, Button Lock, Button Trigger, String control, Flexible control, Percentage control,combination control,1 bytes control,2 bytes control,4 bytes control bytes (String) control. iautomation - Products Catalogue 21
Touch Panels HDL-KNX / Code: M/TBP2.1-460 Order Code: 50191 HDL KNX 2 Button Touch Panel, RGB Backlight, Black The HDL KNX M/TBP(2,4,6).1-46 series has a seamless glass finish, and a backing plate specifically designed for US standard. The module can control multiple targets via its capacitive buttons, which have a customizable RGB LED backlight. The touch panels have touch keys and background lights. KNX Smart has 2,4,6 Buttons wall touch switch panel. Built-in mini infrared receiver, with the function of sending the variety data points at the same time that can simultaneously control many different types of KNX equipment. Functions include: Switch control, Dimming, Scene control, Sequence control, Curtain control, Shutter control, Button Lock, Button Trigger, String control, Flexible control, Percentage control,combination control,1 bytes control,2 bytes control,4 bytes control bytes (String) control. HDL-KNX / Code: M/TBP4.1-461 Order Code: 50187 HDL KNX 4 Button Touch Panel, RGB Backlight, White The HDL KNX M/TBP(2,4,6).1-46 series has a seamless glass finish, and a backing plate specifically designed for US standard. The module can control multiple targets via its capacitive buttons, which have a customizable RGB LED backlight. The touch panels have touch keys and background lights. KNX Smart has 2,4,6 Buttons wall touch switch panel. Built-in mini infrared receiver, with the function of sending the variety data points at the same time that can simultaneously control many different types of KNX equipment. Functions include: Switch control, Dimming, Scene control, Sequence control, Curtain control, Shutter control, Button Lock, Button Trigger, String control, Flexible control, Percentage control,combination control,1 bytes control,2 bytes control,4 bytes control bytes (String) control. HDL-KNX / Code: M/TBP4.1-460 Order Code: 50193 HDL KNX 4 Button Touch Panel, RGB Backlight, Black The HDL KNX M/TBP(2,4,6).1-46 series has a seamless glass finish, and a backing plate specifically designed for US standard. The module can control multiple targets via its capacitive buttons, which have a customizable RGB LED backlight. The touch panels have touch keys and background lights. KNX Smart has 2,4,6 Buttons wall touch switch panel. Built-in mini infrared receiver, with the function of sending the variety data points at the same time that can simultaneously control many different types of KNX equipment. Functions include: Switch control, Dimming, Scene control, Sequence control, Curtain control, Shutter control, Button Lock, Button Trigger, String control, Flexible control, Percentage control,combination control,1 bytes control,2 bytes control,4 bytes control bytes (String) control. 22 iautomation - Products Catalogue
Touch Panels HDL-KNX / Code: M/TBP6.1-461 Order Code: 50189 HDL KNX 6 Button Touch Panel, RGB Backlight, White The HDL KNX M/TBP(2,4,6).1-46 series has a seamless glass finish, and a backing plate specifically designed for US standard. The module can control multiple targets via its capacitive buttons, which have a customizable RGB LED backlight. The touch panels have touch keys and background lights. KNX Smart has 2,4,6 Buttons wall touch switch panel. Built-in mini infrared receiver, with the function of sending the variety data points at the same time that can simultaneously control many different types of KNX equipment. Functions include: Switch control, Dimming, Scene control, Sequence control, Curtain control, Shutter control, Button Lock, Button Trigger, String control, Flexible control, Percentage control,combination control,1 bytes control,2 bytes control,4 bytes control bytes (String) control. HDL-KNX / Code: M/TBP6.1-460 Order Code: 50195 HDL KNX 6 Button Touch Panel, RGB Backlight, Black The HDL KNX M/TBP(2,4,6).1-46 series has a seamless glass finish, and a backing plate specifically designed for US standard. The module can control multiple targets via its capacitive buttons, which have a customizable RGB LED backlight. The touch panels have touch keys and background lights. KNX Smart has 2,4,6 Buttons wall touch switch panel. Built-in mini infrared receiver, with the function of sending the variety data points at the same time that can simultaneously control many different types of KNX equipment. Functions include: Switch control, Dimming, Scene control, Sequence control, Curtain control, Shutter control, Button Lock, Button Trigger, String control, Flexible control, Percentage control,combination control,1 bytes control,2 bytes control,4 bytes control bytes (String) control. iautomation - Products Catalogue 23
Sensors HDL-KNX / Code: M/HS05.1-B Order Code: 50095 HDL KNX Multipurpose Sensor, surface mount The M-HS05.1-B is a 5 in 1 multifunction sensor, and is able to detect motion, Lux, temperature, dry contact, and external telegrams. The unit is able to control a diverse range of targets like, dimming, curtains, alarms, etc. Features: Movement detection, Temperature detection, LUX detection, dry contact detection and external telegram detection. The multi-function motion sensor has 5 logic function blocks and can be set the logical relation AND/OR, Each has 10 output objects. Other features include absolute dimming control, Shutter control, Alarm control, Percentage control, Sequence control, Scene control, String control, Logic combination control. HDL-KNX / Code: M/US05.1 Order Code: TBC HDL KNX Ultrasonic PIR Sensor, recessed mount HDL-KNX M/US05.1 is Ceiling Mount MINI Ultrasonic Sensor, which supports an ultrasonic sensor, Lux sensor and external telegram functions. Due to these extensive functions, the model can control a variety of functions, such as dimming, curtains, alarms, etc. Features: Movement detection, Temperature detection, LUX detection, dry contact detection and external telegram detection. The multi-function motion sensor has 5 logic function blocks and can be set the logical relation AND/OR, Each has 10 output objects. Other features include absolute dimming control, Shutter control, Alarm control, Percentage control, Sequence control, Scene control, String control, Logic combination control. HDL-KNX / Code: M/IS05.1 Order Code: TBC HDL KNX PIR 5 Logic, recessed mount HDL-KNX M/IS05.1 is a ceiling mount PIR sensor. The model can control a variety of functions, such as dimming, curtains, alarms, etc. Features: Movement detection, Temperature detection, LUX detection, dry contact detection and external telegram detection. The multi-function motion sensor has 5 logic function blocks and can be set the logical relation AND/OR, Each has 10 output objects. Other features include absolute dimming control, Shutter control, Alarm control, Percentage control, Sequence control, Scene control, String control, Logic combination control. 24 iautomation - Products Catalogue
Sensors BEG-KNX / Code: BEG RC-Plus-230-KNX Order Code: 92894 KNX RC-Plus 230 motion detector with integrated KNX bus connector, wall mount Automatic or semi-automatic mode with daylight-depending constant light control or switching output. Up to three additional switching channels selectively either daylight-depending or not. Threshold values and follow-up times can be changed for all channels using communication objects. Burn-in function with adjustable burn-in time from 1 to 100 hours. With activatable motion LED, deactivatable via ETS parameter, communication object or remote control. Additional cover clips also ensure stepless adjustment of the detection area and a special base for corner mounting included. Typical applications: monitoring a whole side of a builing, warehouses, ramps or garages. BEG-KNX / Code: BEG PD2-KNX-Microphone Order Code: 92584 KNX PD2 occupancy detector with integrated KNX bus connector, recessed mount Automatic or semi-automatic mode with daylight-depending constant light control or switching output. Integrated acoustic sensor for added detectiona capability. Up to three additional switching channels selectively either daylight-depending or not. Threshold values and follow-up times can be changed for all channels using communication objects. Burn-in function with adjustable burn-in time from 1 to 100 hours. With activatable motion LED, deactivatable via ETS parameter, communication object or remote control. Typical applications: toilets, offices, conference rooms, schools, nursery schools, hospitals. BEG-KNX / Code: BEG PD4-KNX Order Code: 92884 KNX PD4 occupancy detector with extended detection area and integrated KNX bus connector, recessed mount Automatic or semi-automatic mode with daylight-depending constant light control or switching output. Up to three additional switching channels selectively either daylight-depending or not. Threshold values and follow-up times can be changed for all channels using communication objects. Burn-in function with adjustable burn-in time from 1 to 100 hours. With activatable motion LED, deactivatable via ETS parameter, communication object or remote control Typical applications: monitoring of large areas like underground garages, gyms, warehouses, loading ramps, halls. Available in surface mount. Order code 92883. iautomation - Products Catalogue 25
Sensors BEG-KNX / Code: BEG PD4-C-KNX Order Code: 92887 KNX PD4 occupancy detector with extended detection area and integrated KNX bus connector with narrow detection area ideal for corridors Automatic or semi-automatic mode with daylight-depending constant light control or switching output. Up to three additional switching channels selectively either daylight-depending or not. Threshold values and follow-up times can be changed for all channels using communication objects. Burn-in function with adjustable burn-in time from 1 to 100 hours. With activatable motion LED, deactivatable via ETS parameter, communication object or remote control. Typical applications: monitoring of long corridors. Available in surface mount. Order code 92886. BEG-KNX / Code: BEG PD4-GH-KNX Order Code: 92889 KNX occupancy detector with extended detection area and integrated KNX bus connector with oval detection area ideal for high-bay storages, surface mount. Automatic or semi-automatic mode with daylight-depending constant light control or switching output. Up to three additional switching channels selectively either daylight-depending or not. Threshold values and follow-up times can be changed for all channels using communication objects. Burn-in function with adjustable burn-in time from 1 to 100 hours. With activatable motion LED, deactivatable via ETS parameter, communication object or remote control. Typical applications: monitoring of warehouses, high-bay storages, wherever at a great mounting height is necessary. BEG-KNX / Code: BEG PD9-KNX Order Code: 92890 KNX PD9 mini occupancy detector with integrated KNX bus connector, recessed mount. Automatic or semi-automatic mode with daylight-depending constant light control or switching output. Up to three additional switching channels selectively either daylight-depending or not. Threshold values and follow-up times can be changed for all channels using communication objects. Burn-in function with adjustable burn-in time from 1 to 100 hours. With activatable motion LED, deactivatable via ETS parameter, communication object or remote control. Special version with spring-clamps for easy and time-saving installation into ceilings or directly built into light fittings. Typical applications: offices, conference rooms, schools, nursery schools, hospitals 26 iautomation - Products Catalogue
Sensors Accessories BEG-KNX / Code: BEG PD9-GH-KNX Order Code: 92891 KNX PD9 mini occupancy detector with integrated bus connector, for high-bay applications, recessed mount. Automatic or semi-automatic mode with daylight-depending constant light control or switching output. Up to three additional switching channels selectively either daylight-depending or not. Threshold values and follow-up times can be changed for all channels using communication objects. Burn-in function with adjustable burn-in time from 1 to 100 hours. With activatable motion LED, deactivatable via ETS parameter, communication object or remote control. Typical applications: monitoring of warehouses, high-bay storages, wherever at a great mounting height is necessary. BEG-KNX / Code: BEG PD11-FLAT-KNX Order Code: 92893 Low profile KNX PD11 occupancy detector with integrated KNX bus connector, recessed mount. Special version with spring-clamps for easy and time-saving installation into ceilings or directly built into light fittings Automatic or semi-automatic mode with daylight-depending constant light control or switching output. Up to three additional switching channels selectively either daylight-depending or not. Threshold values and follow-up times can be changed for all channels using communication objects. Burn-in function with adjustable burn-in time from 1 to 100 hours. With activatable motion LED, deactivatable via ETS parameter, communication object or remote control. Typical applications: offices, conference rooms, schools. BEG-KNX / Code: BEG IR-PD-KNX Order Code: 92123 Infrared remote control for KNX occupancy and motion detectors:. To suit the following models:- - RC-plus next-knx - PD2-KNX - PD4-KNX - PD4-KNX-GH - PD4-KNX-K - PD9-KNX - PD9-KNX-GH - PD11-KNX-FLAT - Indoor 180-KNX Comes complete with a practical wall bracket (dimensions (approx.): 63 x 29 x 19 mm). iautomation - Products Catalogue 27