Henkel has developed three new magnet bonding adhesives,, 3060, Faster Fixture Times Easier Processing Higher Resistance Extended Shelf Life Higher Impact Strength Higher Shear Strength Improved Moisture Resistance Acid-free, non-corrosive formulation Visit Apply spray activator Apply adhesive Mate parts Room temp cure for an epoxy Apply adhesive Mate parts Pass through Induction heat cure Two cascading adhesive Mate parts Room temp cure Apply adhesive Mate parts Pass through convection oven Oven heat cure Except as otherwise noted, and designate trademarks of or its affiliates. = registered in the U.S. Patent and Trademark Office., 2007. All rights reserved. 4646 LT-4914 (12/07)
Henkel has developed three new magnet bonding adhesives,, 3060, Faster Fixture Times Easier Processing Higher Resistance Extended Shelf Life Higher Impact Strength Higher Shear Strength Improved Moisture Resistance Acid-free, non-corrosive formulation Visit Apply spray activator Apply adhesive Mate parts Room temp cure for an epoxy Apply adhesive Mate parts Pass through Induction heat cure Two cascading adhesive Mate parts Room temp cure Apply adhesive Mate parts Pass through convection oven Oven heat cure Except as otherwise noted, and designate trademarks of or its affiliates. = registered in the U.S. Patent and Trademark Office., 2007. All rights reserved. 4646 LT-4914 (12/07)
Product Performance Details Loctite 331 Ultra-Fast Fixture Two step, acid free, toughened, activatorcure acrylic. Fixtures in 20 and develops full strength in 30 minutes. Excellent high temperature resistance. Ideal for bonding close-fitting metals and magnets. 1057673 30 ml syringe 1057674 1 liter bottle 1062124* 5 gallon pail Two Step No-Mix Room Cure Cure Method Viscosity (cp) 20,000 0.04 Gap Fill (in) 15 to 30 Fixture Time () Cure Time (hours) Shear Strength 1 (psi) 24 3,100 >13 Impact Strength 1 (kj/m 2 ) Resistance Patent Pending Loctite 3060 Gap Filling Two-component, acid-free, toughened external-mix acrylic requires no static mixing or activators, with excellent gap filling capability. Turns green when mixed. Excellent high temperature resistance. Ideal for bonding large metal parts and magnets. 1087985 60 ml kit (two 30 ml syringes) 1087986 1 liter, resin 1087987 1 liter, activator 1087988* 10 liter, resin 1088035* 10 liter, activator External Mix Room Cure 15,000 >0.05 60 to 90 24 3,800 >13 350 F (176 C) Loctite E-220IC Hysol Induction Cure A one-component, acid-free adhesive designed for induction cure operations. A fast curing paste that is formulated to reduce the risk of localized heating. Well-suited for metal and magnet bonding. 1078250 30 ml syringe 1078261 1 liter bottle 1078499* 5 gallon pail Induction Heat Cure Paste >0.50 30 to 60 Upon cooling (induction) 1 (oven) 5,900 >13 Loctite E-214HP Hysol Oven Cure A one-component, acid-free, heat cure epoxy. Light grey, temperature resistant, high strength, non-sag. 29339 30 ml cartridge 29340 300 ml cartridge Oven Heat Cure 2,500,000 >0.50 30 to 45 minutes 1 (oven) 4,820 *Made to order item 1 Steel
Equipment Selection Manual Semi-Automated Automated 331 Loctite Integrated Semi-Automatic Loctite Low Viscosity Fluid Pumps 988519 Automated Spraying of * Loctite Bond-A-Matic Reservoirs, Spray Valves, and Spray Valve Controllers Manual Spray-On Loctite 7387 Depend External Mix Valve Fixture Assembly 1095801 Loctite Low Viscosity Fluid Pumps 988519 3060 E-220IC Resin s Curing Induction Cure Equipment* Two Stationary Applicator Valves 97113 Two Loctite Integrated Semi-Automatic s Dual Foot Pedal Switch 1095798 Loctite Integrated Semi-Automatic Resin Loctite High Viscosity Paste Pump System 988845 Curing Induction Curing Station* E-214HP Loctite 300 ml Pneumatic Cartridge 97002 * Call 1-800-LOCTITE to discuss induction curing and automated activator equipment options with a Loctite engineer Loctite High Pressure 300 ml Cartridge 1046901 More information on equipment is available at: equipment.loctite.com Loctite High Viscosity Paste Pump System 988845, 988724 Note: E-214HP in a 5-gallon pail can be made available upon request. To Fully Automate: All semi-automated systems shown can be fully automated by integrating Loctite robotic dispensing systems into existing manufacturing environments. Visit equipment.loctite.com and select Motion Control Systems for further details.
Henkel has developed three new magnet bonding adhesives,, 3060, Faster Fixture Times Easier Processing Higher Resistance Extended Shelf Life Higher Impact Strength Higher Shear Strength Improved Moisture Resistance Acid-free, non-corrosive formulation Visit Apply spray activator Apply adhesive Mate parts Room temp cure for an epoxy Apply adhesive Mate parts Pass through Induction heat cure Two cascading adhesive Mate parts Room temp cure Apply adhesive Mate parts Pass through convection oven Oven heat cure Except as otherwise noted, and designate trademarks of or its affiliates. = registered in the U.S. Patent and Trademark Office., 2007. All rights reserved. 4646 LT-4914 (12/07)