ΘΕΜΑ: December 2015 Notification Procedure 1025/ PDF Free Download

Λευκωσία, 15 Ιανουαρίου 2016 ΠΡΟΣ Όλα τα Μέλη ΘΕΜΑ December 2015 Notification Procedure 1025/2012 Κυρία/Κύριε, Σας επισυνάπτουμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων. Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνικών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγο εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων ή την κυπριακή βιομηχανία και οικονομία. Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δεν υπάρξει οποιαδήποτε ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό ιοίκησης και ιεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ 22 411439, Φαξ. 22 411511 και στην ηλεκτρονική διεύθυνση m.nicolaou@cys.org.cy Με εκτίμηση, Ανδρέας Ανδρέου, Αναπλ. ιευθυντής Τμήματος Βιομηχανίας. για Γενικό Γραμματέα. /ΜΚ. Λεωφ. Γρίβα ιγενή 38 & εληγιώργη 3, 1066, Τ.Θ. 21455, 1509 Λευκωσία, Κύπρος, Τηλ. + 357-22889860, Φαξ. + 357-22665685, E-mailmeropi@ccci.org.cy, Ιστοσελίδαwww.ccci.org.cy

Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2015-12-01 to 2015-12-31 Register issued on 2016-01-08 A list of subsectors can be found at the end of this document.

Information procedure Page 2 Monthly Notifications Register Notifications registered at CCMC from 2015-12-01 to 2015-12-31 Sector A SERVICES Register issued on 2016-01-08

Subsector A02 CLEANING SERVICES Page 3 Subsector A02 Registration Date 2015-12-21 ASI Austria ID 00026666/0001 ICS 03.080.30 National Ref ÖNORM D 2040 Cleaning services - Training and training centres for cleaning of monuments, facades and buildings as well as house maintenance Scope This Austrian standard regulates the minimum standards for the training of cleaning services of monuments, facades and buildings and house care. This Austrian standard supports learning services provider in the field of cleaning services in the fulfillment of ÖNORM ISO 29990, in particular sections 4.6 " Human resources management" and 4.8 " allocation of resources". The present ÖNORM allows to the public and private client a comparison of training in commercial cleaning in terms of the used cleaning and inspection staff. Subsector A02 Registration Date 2015-12-21 ASI Austria ID 00026667/0001 ICS 03.080.30 National Ref ÖNORM D 2050 Cleaning services - Performances in square meter in the field of cleaning of monuments, facades and buildings Scope This Austrian standard regulates figures for cleaning services depending on the level of cleaning, room areas and use of rooms. This Austrian standard specifies the maximum performances in square meters (m2- performances), which the employees have to provide, depending on the activities and requirements of their employers. Through a scheme under the collective agreement for monuments, facades and building cleaning, the respective m2- performance was declared for binding both the employers and employees. Subsector A02 Registration Date 2015-12-18 SIS Draft Issue Date 2015-12-16 Sweden Latest Date for Comments 2016-02-16 ID 00627801/0002 ICS 03.080.20 National Ref 627801 Cleaning quality - System for the establishment and assessment of cleaning quality Subsector A05 MAINTENANCE SERVICES

Page 4 Subsector A05 Registration Date 2015-12-30 EVS Estonia ID 00089052/0001 ICS 01.040.03, 03.080.30, 03.080.99 National Ref prevs 910 Procurement documents for property maintenace and their preparing guide Scope This National Standard defines the main concepts for property maintenace procurement. Instructions, forms and ideas are given for rational and high quality procurement and accompanying documentation. The scope includes the following complex activities from EVS 8072010 code 100 (administration of the property), code 200 (technical maintenance), code 300 (cleaning and waste disposal). In most cases, not many independent activities are necessary for property maintenance. The mentioned activities (administration of the property, technical maintenance, cleaning and waste disposal) are minimal to ensure safety when using the property. As a rule, the activities should be done by - the procurer (e.g. administration of the property service, could be bought in); or - the tenderer (technical maintenance, cleaning and waste disposal). The property owner should decide on the administration type and organising (whether the services are bought in or not). This standard assumes that services are bought in. Other complex activities mentioned in EVS 8072010 are not very universally used and depend on the specific property and the wishes of its users (e.g repairs, owner's duties, consumable services, supporting services). For this reason, these activities do not belong to the scope of this standard. Subsector A06 BUILG AND CONSTRUCTION SERVICES Subsector A06 Registration Date 2015-12-03 BSI United Kingdom ID 01503504/0001 ICS National Ref BS 11922007+A12015 A2 Collaborative production of architectural, engineering and constructioninformation. Code of practice. Amendment Subsector A09 FACILITY MANAGEMENT Subsector A09 Registration Date 2015-12-15 ID tst11686/0001 ICS 47.020.50 National Ref

Scope Rules for helicopter innflight refuelling (HIFR) equipment This standard covers the rules for the equipment necessary for refuelling system to helikopter from ships. Page 5 Subsector A11 SAFETY AND SECURITY Subsector A11 Registration Date 2015-12-08 ID t1012355/0001 ICS 03.080.30 National Ref Competent services - Floor standing boilers and combi boilers - Rules Scope This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of competent services of floor standing boilers and combi boilers. Subsector A11 Registration Date 2015-12-08 ID tst12540/0002 ICS 03.080.30 National Ref Competent services - Devices using at safety systems - Rules Scope This standard includes rules for structural features, management, technical equipment, personnel specifications and certification of competent services for devices using at safety systems. Subsector A11 Registration Date 2015-12-08 ID tst12643/0002 ICS 03.080.30 National Ref Competent services - Uninterruptible power supplies - Rules Scope This standard includes rules for structural features, management, technical equipment, personnel specifications and certification of competent services for uninterruptible power supplies.

Page 6 Subsector A11 Registration Date 2015-12-08 ID tst12963/0002 ICS 03.080.30 National Ref Competent services - POS, ATM, Kiosk and Portable Terminals - Rules Scope This standard includes rules for structural features, management, technical equipment, personnel specifications and certification of competent services for POS, ATM, kiosk and portable computer. Subsector A99 UNDETERMINED Subsector A99 Registration Date 2015-12-21 ASI Austria ID 00026661/0001 ICS 03.100.01, 13.020.10 National Ref ÖNORM ISO 20400 Sustainable purchasing Scope This international standard provides guidance to organizations integrating sustainable development and social responsibility within procurement, independent of their activity or size, as described in ISO 260002010 - Guidance on social responsibility. It is intended for stakeholders involved in or impacted by procurement decisions and processes. Subsector A99 Registration Date 2015-12-15 ID tst11006/0001 ICS 95.020 National Ref Techinical characteristics of IFF MKxA and MK XII interrogators and transponders- Part III IFF installed system characteristics Scope This standard covers the technical characteristics of the IFF Mkx (A) and Mk XII Iinterogators and transpanders. Subsector A99 Registration Date 2015-12-21

Page 7 ID tst12657/0001 ICS 95.020 National Ref Military communications directory system Scope This standard covers the military communications driectory system. Subsector A99 Registration Date 2015-12-15 ID tst13111/0002 ICS 03.080.30 National Ref Work places - General rules for city cleaning Scope This standard includes general rules for physical structure, management rules and personnel characteristics of Workplaces - General rules for city cleaning. ** End of Sector **

Information procedure Page 8 Monthly Notifications Register Notifications registered at CCMC from 2015-12-01 to 2015-12-31 Sector B BUILG AND CONSTRUCTION Register issued on 2016-01-08

Subsector B01 FIRE PROTECTION Page 9 Subsector B01 Registration Date 2015-12-16 ID 03100989/0001 ICS National Ref 03100989 Water pool for fire fighting Subsector B01 Registration Date 2015-12-16 ID 03100991/0001 ICS 13.220.10 National Ref 14461-6 Delivery valve installation - Part 6 Wall hydrants with flat hose for trained personnel Subsector B01 Registration Date 2015-12-17 ASRO Draft Issue Date 2016-02-17 Romania Latest Date for Comments 2015-04-30 ID 13450116/0001 ICS 13.220.10 National Ref SR 13450-1 Technical means and procedures for fire fighting. Appliances for firefighting and fire prevention. Part 1 Classification, definitions, terminology, general technical requirements Scope This standard specifies general technical requirements for quality and how that classification, definition and terminology used in fire fighting Subsector B01 Registration Date 2015-12-17 ASRO Draft Issue Date 2016-02-17 Romania Latest Date for Comments 2015-04-30 ID 13450216/0001 Draft for public enquiry ICS 13.220.10 National Ref SR 13450-2 Technical means and procedures for fire fighting. Appliances for firefighting and fire prevention. Part 2 General technical quality requirements for foam tender Scope The standard specifies general requirements for quality design and construct for special vehicles like fire using water and foam extinguishing and specifying the classification, definition and terminology used in the field

Page 10 Subsector B02 STRUCTURES Subsector B02 Registration Date 2015-12-21 ASI Austria ID 00026660/0001 ICS 91.010.30, 91.080.10 National Ref ÖNORM B 1999-1-1 Eurocode 9 Design of aluminium structures - Part 1-1 General structural rules - National specifications concerning ÖNORM EN 1999-1-1, national comments and national supplements Scope This ÖNORM specifies national parameters to ÖNORM EN 1999-1-1 and shall be applied jointly with ÖNORM EN 1999-1-1 in Austria.This ÖNORM applies to the design of buildings and civil engineering and structural works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 - Basis of structural design. Subsector B02 Registration Date 2015-12-03 BSI United Kingdom ID 01503400/0001 ICS National Ref BS 8006-12010 Code of practice for strengthened/reinforced soils and other fills. Amendment Subsector B02 Registration Date 2015-12-16 ID 03100941/0001 ICS National Ref 03100941 Firefighting purposes - Escape ladder installations - Part 1 Escape ladder with and without falling protection, holding device, platform Subsector B02 Registration Date 2015-12-16

ID 03100942/0001 ICS National Ref 03100942 Firefighting purposes - Escape ladder installations - Part 2 Rescue ways on flat and inclined roofs Page 11 Subsector B02 Registration Date 2015-12-16 ID 11904034/0001 ICS National Ref 11904034 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 9 Mechanical drainage of sewage sludge Subsector B03 CONCRETE Subsector B03 Registration Date 2015-12-03 BSI United Kingdom ID 01503326/0001 ICS National Ref BS 8500-12015+A1 Concrete. Complementary British Standard to BS EN 206. Method of specifying and guidance for the specifier. Amendment Subsector B03 Registration Date 2015-12-03 BSI United Kingdom ID 01503328/0001 ICS National Ref BS 8500-22015+A1 Concrete. Complementary British Standard to BS EN 206. Specification for constituent materials and concrete. Amendment

Page 12 Subsector B03 Registration Date 2015-12-03 BSI United Kingdom ID 01503404/0001 ICS National Ref NA to BS EN 1992-4 UK National Annex to BS EN 1992-4. Eurocode 2. Design of concrete structures Part 4 Design of fastenings Subsector B03 Registration Date 2015-12-15 ID t0105379/0001 ICS 91.100.30 National Ref Standard practice for selecting proportions and mix design for mass concrete Scope Mass concrete is defined as any volume of concrete with dimensions large enough to require that measures be taken to cope with generation of heat from hydration of the cement and attendant volume change to minimize cracking. The design of mass concrete structures is generally based on durability, economy, and thermal action, with strength often being a secondary, rather than a primary, concern. The one characteristic that distinguishes mass concrete from other concrete work is thermal behavior. Because the cement-water reaction is exothermic by nature, the temperature rise within a large concrete mass, where the heat is not quickly dissipated, can be quite high. Significant tensile stresses and strains may result from the restrained volume change associated with a decline in temperature as heat of hydration is dissipated. Measures should be taken where cracking due to thermal behavior may cause a loss of structural integrity and monolithic action, excessive seepage and shortening of the service life of the structure, or be aesthetically objectionable. Many of the principles in mass concrete practice can also be applied to general concrete work, whereby economic and other benefits may be realized. International Modified ACI 207.1R Subsector B05 FIRE TESTS Subsector B05 Registration Date 2015-12-17 ASRO Draft Issue Date 2016-02-17 Romania Latest Date for Comments 2015-04-30 ID 10903216/0001 Published Standard ICS 13.220.50 National Ref STAS 10903/2 Fire protection. Determination of fire load in buildings Scope The standard specifies means for evaluation of fire load in buildings

Page 13 Subsector B08 DOORS AND WINDOWS Subsector B08 Registration Date 2015-12-01 AFNOR France ID 00193292/0001 ICS National Ref PR NF P26-431 Building hardware - Locks for building - Safety multipoint flush lock Subsector B08 Registration Date 2015-12-01 AFNOR France ID 00193293/0001 ICS National Ref PR NF P26-103 Hardware - Blocking mortice lock devices multi-point and espagnolette locks - Characteristics and tests Subsector B08 Registration Date 2015-12-22 BSI United Kingdom ID 01503505/0001 ICS National Ref BS 36212007+A3 Thief resistant lock assembly. Key egress. Amendment Subsector B08 Registration Date 2015-12-22 BSI United Kingdom ID 01503506/0001 ICS National Ref BS 86212007+A3 Thief resistant lock assembly. Keyless egress. Amendment

Page 14 Subsector B08 Registration Date 2015-12-22 BSI United Kingdom ID 01503507/0001 ICS National Ref BS 106212007+A3 Thief resistant dual-mode lock assembly. Amendment Subsector B18 SCAFFOLG Subsector B18 Registration Date 2015-12-15 ID tst07004/0001 ICS 55.180.30 National Ref Air cargo equipment - Pallet nets Scope This standard covers the dimensional, structural and enviromental requirements for nets used to secure cargo on aircarf pallets. Subsector B19 CERAMIC TILES Subsector B19 Registration Date 2015-12-16 ID 00517082/0001 ICS 91.100.50 National Ref 18157-2 Execution of ceramic linings and coverings by thin mortar bed technique - Part 2 Dispersion adhesives Subsector B19 Registration Date 2015-12-16 ID 00517228/0001 ICS 91.100.10

Page 15 National Ref 18157-1 Execution of ceramic linings and coverings by thin mortar bed technique - Part 1 Cement-based mortars Subsector B19 Registration Date 2015-12-16 ID 00517599/0001 ICS 83.180 National Ref 18157-3 Execution of ceramic linings and coverings by thin mortar bed technique - Part 3 Reaction resin adhesives Subsector B19 Registration Date 2015-12-16 ID 00517637/0001 ICS 91.100.25 National Ref 18158 Clinker floor tiles Subsector B26 ROAD BUILG AND MAINTENANCE Subsector B26 Registration Date 2015-12-03 BSI United Kingdom ID 01503401/0001 ICS National Ref BS NA 1991-2 UK National Annex to Eurocode 1. Actions on structures Traffic loads on bridges. Amendment Subsector B26 Registration Date 2015-12-22 BSI United Kingdom ID 01503508/0001

Page 16 ICS National Ref BS NA to BS EN 1993-1-5 UK National Annex to Eurocode 3. Design of steel structures. Plated structural elements. Amendment Subsector B29 AGGREGATES Subsector B29 Registration Date 2015-12-16 ID 06234870/0001 ICS National Ref 06234870 Testing of fillers for road construction - Stiffening effect of fillers on bitumen - Stabilization index Subsector B34 BUILG AND CONSTRUCTION ENVIRONMENTAL ASPECTS Subsector B34 Registration Date 2015-12-14 UNMS Slovakia ID 73600116/0001 ICS 91.120.10 National Ref Thermal protection of buildings. Thermal performance of buildings and components. Part 2 Functional requirements REV/AMD STN 73 0540-22015 Subsector B99 UNDETERMINED Subsector B99 Registration Date 2015-12-10 SIS Draft Issue Date 2015-12-10 Sweden Latest Date for Comments 2016-02-10 ID 00021054/0001 ICS National Ref 21054 Area and volume of buildings - Terminology and measurement Scope I denna standard ges definitioner av area- och volymbegrepp, information om tillämpning och omfattning, samt regler för beräkning och redovisning av area och volym hos husbyggnader och delar av husbyggnader.

Page 17 Denna standard är avsedd att tillämpas vid area- och volymberäkning för alla slags husbyggnader. Den gäller för både nyproduktion och i befintligt bestånd. Den kan användas såväl vid planering och projektering som vid bygglov, taxering, värdering, hyressättning, förvaltning samt för statistisk bearbetning etc. Subsector B99 Registration Date 2015-12-21 ASI Austria ID 00026669/0001 ICS 91.010.20, 91.060.30 National Ref ÖNORM B 2232 Floor topping - Contract to provide services Scope This Austrian Standard contains rules of procedure and terms of contract for the execution of floor screeds. Floor constructions of prefabricated components or screeds produced outside of closed rooms are not in the scope of this Austrian Standard. Subsector B99 Registration Date 2015-12-22 EVS Estonia ID 00088974/0001 ICS 91.120.10 National Ref prevs 908-1 Guidance for calculation of thermal transmittance of building envelope - Part 1 Opaque building envelope in contact with outdoor-air Scope Document specifies guidance for calculation of thermal transmittance and thermal resistance of building components and building envelope, including guidance for recommendated values of thermal transmittance for building envelope in Estonia. Subsector B99 Registration Date 2015-12-22 BSI United Kingdom ID 01503664/0001 ICS National Ref BS 8300-2 Design of the external environment to meet the needs of disabled people. Code of practice

Page 18 Subsector B99 Registration Date 2015-12-22 BSI United Kingdom ID 01503670/0001 ICS National Ref BS 8300-1 Design of accessible and inclusive buildings and their approaches. Codeof practice ** End of Sector **

Information procedure Page 19 Monthly Notifications Register Notifications registered at CCMC from 2015-12-01 to 2015-12-31 Sector C CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on 2016-01-08

Subsector C01 Food products Page 20 Subsector C01 Registration Date 2015-12-21 ID t0105008/0001 ICS 11.120.10 National Ref Fennel (powdered) Scope Fennel (powdered) Subsector C01 Registration Date 2015-12-15 ID tst00980/0001 ICS 67.120.10 National Ref Sausage Scope This standard spcifies sausage. İt does not cover sausages which is conserved in brine or meat which is not mentioned in clause 0.2.1. Subsector C01 Registration Date 2015-12-15 ID tst01536/0001 ICS 67.160.20 National Ref Grapefruit Juice Scope This standard applies to grapefruit juice. It does not apply to other beverages which is produced with grapefurit. Subsector C01 Registration Date 2015-12-15 ID tst01537/0001 ICS 67.160.20 National Ref Concentrated Orange Juice Scope Bu standard, konsantre portakal suyunu ve dondurulmuş konsantre portakal suyunu kapsar.

Page 21 Subsector C01 Registration Date 2015-12-15 ID tst01595/0001 ICS 67.160.20 National Ref Tomato Juice Scope This standard applies to tomato juice. It does not apply to tomato juices with spiced which is used for preparation of cocktails. Subsector C01 Registration Date 2015-12-15 ID tst03633/0001 ICS 67.160.20 National Ref Apple Juice Scope This standard covers the apple juice. It does not cover apple concontrate and other beverages which apple juice is used. Subsector C01 Registration Date 2015-12-15 ID tst11322/0001 ICS 67.160.20 National Ref Concentrated Lemon Juice-Frozen Scope This standard covers the frozen concentrated lemon juice. Subsector C01 Registration Date 2015-12-31 ID tst12513/0001 ICS 67.100.30 National Ref

Scope Halloumi Cheese This standard concerns only halloumi cheese Page 22 Subsector C01 Registration Date 2015-12-23 ID tst13079/0001 ICS 03.080.30 National Ref Internet service providing - Terms and definitions Scope This standard includes, terms and definitions used for internet service providing. Subsector C01 Registration Date 2015-12-23 ID tst13080/0001 ICS 03.080.30 National Ref Internet service providing General rules Scope This standard includes, rules for technical properties required for internet service providing, informations should be provided, basic services and services should be given on network and legal responsibility. Subsector C02 PAINTS AND RELATED PRODUCTS Subsector C02 Registration Date 2015-12-21 ASI Austria ID 00026663/0001 ICS 87.040 National Ref ÖNORM C 2350 Coating materials for coating systems applied on dimensionally stable exterior building constructions of wood - Minimum requirements and tests Scope This ÖNORM describes minimum requirements and tests for coating materials which are intended to be applied on wood surfaces using manual and/or industrial processes and for coatings made thereof on dimensionally stable wooden outdoor buildings components according to ÖNORM B 3803 to protect against weathering and for decorative purposes.

Page 23 Subsector C02 Registration Date 2015-12-31 ID tst11651/0001 ICS 87.040 National Ref Undercoat and Putty-Olearesinous Based Scope This standard covers oleore sinous based undercoots and putty which is applied generally on metal surfaces before topcoat paint application. International Modified JIS K 54001990 Subsector C02 Registration Date 2015-12-31 ID tst11651/0001 ICS 87.040 National Ref Undercoat and Putty-Olearesinous Based Scope This standard covers oleore sinous based undercoots and putty which is applied generally on metal surfaces before topcoat paint application. International Modified JIS K 54071990 Subsector C02 Registration Date 2015-12-31 ID tst11651/0001 ICS 87.040 National Ref Undercoat and Putty-Olearesinous Based Scope This standard covers oleore sinous based undercoots and putty which is applied generally on metal surfaces before topcoat paint application. International Modified JIS K 55911988 Subsector C11 TOBACCO Subsector C11 Registration Date 2015-12-21 PKN Poland ID 03901122/0001

Page 24 ICS 01.040.65, 65.160 National Ref prpn-a-99000 Tobacco and tobacco products -- Vocabulary Scope The terms, together with their definitions, used in the processing of tobacco and manufacturing of tobacco products and testing of tobacco and tobacco products are specified, there are concerning with tobacco and tobacco leaves, tobacco curing methods, tobacco processing and tobacco products ** End of Sector **

Information procedure Page 25 Monthly Notifications Register Notifications registered at CCMC from 2015-12-01 to 2015-12-31 Sector F FUNDAMENTAL STANDARDS Register issued on 2016-01-08

Subsector F05 MEASURING INSTRUMENTS Page 26 Subsector F05 Registration Date 2015-12-21 ID tst06477/0001 ICS 49.080 National Ref Aerospace - Fluid systems and components - Pressure and temperature classifications Scope This standard covers the fluid systems and components for pressure and temperature classifications in aerospace. Subsector F07 DOCUMENTATION AND INFORMATION Subsector F07 Registration Date 2015-12-03 BSI United Kingdom ID 01503373/0001 ICS National Ref BS 8888 Technical product documentation and specification Subsector F12 INFORMATION PROCESSING SYSTEMS Subsector F12 Registration Date 2015-12-01 AFNOR France ID 00193627/0001 ICS National Ref PR XP P99-508 Public transport - Generic Multiservice Application Subsector F13 ENVIRONMENTAL TESTS Subsector F13 Registration Date 2015-12-21 ID tst11843/0001

ICS 19.040 National Ref Environmental conditions test methods and engineering guidelines High temperature (military purpose) Scope This standard covers the method of determining the effects of high temperature on the operation copabilitiy of the materials such as very type of guns, vechiles, equipment, apparatus etc. Page 27 Subsector F15 MATERIAL TESTING IN GENERAL Subsector F15 Registration Date 2015-12-16 ID 06234891/0001 ICS National Ref 06234891 Thermal analysis (TA) - Terms Subsector F20 QUALITY ASSURANCE Subsector F20 Registration Date 2015-12-21 IPQ Draft Issue Date 2015-12-15 Portugal Latest Date for Comments 2016-01-15 ID 18615001/0001 Draft for public enquiry ICS 03.120.10 National Ref prnp 4547 Management systems of integrated continuing care units of internment. Requirements Scope This International Standard specifies requirements for a quality management system where an organization a) needs to demonstrate its ability to consistently, provide a service that meets the customer's requirements, statutory and regulatory requirements; b) aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the same and to ensure compliance with customer requirements, statutory and regulatory requirements. All requirements of this International Standard are generic and are intended to apply to all organizations, integrated continuous care inpatient units Subsector F20 Registration Date 2015-12-04 IPQ Draft Issue Date 2015-10-26 Portugal Latest Date for Comments 2015-11-26

Page 28 ID 18715190/0001 Draft for public enquiry ICS 03.120, 03.180, 33.080 National Ref prnp 4545 ECBCheck quality evaluation model for courses and programmes with a strong component in e-learning. Requirements Scope This standard describes the technical requirements to be observed in the promotion of courses and programmes with a strong component in e-learning. This standard aims to raise the quality levels of service delivery and accountability of organizations operating in the market with this type of services, measures the degree of success of courses and programmes and supports continuous improvement. It can be used both by the organization itself for the purposes of self-assessment, such as external entities for the purpose of certification services. This standard applies to any promoter organization of education and training with strong emphasis on e-learning, regardless of their size, geographic location, legal status (public or private) and commercial purposes (with or without profit). Subsector F20 Registration Date 2015-12-21 IPQ Draft Issue Date 2015-12-15 Portugal Latest Date for Comments 2016-01-15 ID A0331501/0001 Draft for public enquiry ICS 03.120.10 National Ref prdnp TS 4546 Recognition system of the service quality of small and médium-sized enterprises in trade and services sector Scope This technical specification defines the model of the recognition system and it is applied to SME s from Trade and Services sector, whatever the nature of traded goods and services Subsector F20 Registration Date 2015-12-15 ID tst10000/0002 ICS 13.120 National Ref Mutual acceptance of government quality assurance (military) and the usage rules of allied quality assurance publications Scope Standard covers mutual acceptance of government quality assurance (military) and the usage rules of allied quality assurance publications Subsector F21 VALUE ANALYSIS AND PROJECT NETWORK

Page 29 Subsector F21 Registration Date 2015-12-30 EVS Estonia ID 00089049/0001 ICS 03.060, 03.080, 91.040, 93.010 National Ref prevs 875-6 Property valuation - Part 6 Valuation for lending purposes Scope Current standard is based on the IVSC and the EVS latest standard and is aiming to support consistency in valuation for lending purposes. The standard also gives further explanations to meet national regulation. Subsector F21 Registration Date 2015-12-30 EVS Estonia ID 00089050/0001 ICS 03.060, 03.080, 91.040, 93.010 National Ref prevs 875-7 Property valuation - Part 7 Reviewing of valuations Scope Current standard is providing rules and suggestions when reviewing of the other valuation report has to be considered. The standard is based on the IVSC and the EVS latest version. Subsector F21 Registration Date 2015-12-30 EVS Estonia ID 00089051/0001 ICS 03.060, 03.080, 91.040, 93.010 National Ref prevs 875-13 Property Valuation - Part 13 Consideration of environmental risks, land use restrictions and nature protection in property valuation Scope Current standard is aiming to provide consistency in analysing market value in relation with environment restrictions. The standard provides the comments and suggestions related to the use of comprehensive environmental regulation when the purpose is market value for financial statements, loan collaterals, etc Subsector F99 UNDETERMINED Subsector F99 Registration Date 2015-12-03

ASRO Romania ID 010000-4/0001 ICS 01.120 National Ref SR 10000-42012/A912015 Principles and methodology of standardization. Part 4 Presentation form of Romanian standards REV/AMD SR 10000-42012 Page 30 Subsector F99 Registration Date 2015-12-03 BSI United Kingdom ID 01503331/0001 ICS National Ref BS 8001 Framework for implementing the principles of the circular economy inorganizations. Guide ** End of Sector **

Information procedure Page 31 Monthly Notifications Register Notifications registered at CCMC from 2015-12-01 to 2015-12-31 Sector H PRODUCTS FOR HOUSEHOLD AND LEISURE USE Register issued on 2016-01-08

Subsector H04 SPORTS EQUIPMENT Page 32 Subsector H04 Registration Date 2015-12-01 AFNOR France ID 00193629/0001 ICS National Ref PR XP S56-207 Hygiene of sand-pits. Requirements and test methods. Subsector H04 Registration Date 2015-12-01 AFNOR France ID 00193630/0001 ICS National Ref PR NF P90-209 sports halls for martial arts Subsector H09 FURNITURE Subsector H09 Registration Date 2015-12-21 ASI Austria ID 00026665/0001 ICS 97.140 National Ref ÖNORM A 1640 Furniture for children in kindergartens and crèches - Dimensions and design Scope This ÖNORM specifies dimensions and design for children furniture in kindergartens and crèches independent from the material (e.g. wood, plastics). Subsector H19 NON-ELECTRIC COOKERS AND BARBECUES Subsector H19 (Secondary Subsector) ID tst10880/0001 ICS 13.220.20, 47.040, 47.060 Registration Date 2015-12-31

Page 33 National Ref Scope Compensators - Steel expansion joints for gas pipe lines and installations This standard, covers compesators from steel used in gas pipelines and installation for combustible gases (natural gas, citypas, LPG and mixed pases). European Modified 306812013 Subsector H33 FOOTWEAR (EXCLUG PROTECTIVE FOOTWEAR) Subsector H33 Registration Date 2015-12-01 AFNOR France ID 00193628/0001 ICS National Ref S52-011 Public swimming pool Treatment of swimming pools with ozone General safety requirements and test methods Subsector H99 UNDETERMINED Subsector H99 Registration Date 2015-12-21 ASI Austria ID 00026664/0001 ICS 13.060.01, 13.060.25, 97.220.10 National Ref ÖNORM M 6217 Swimming pools - Internal supervision, maintenance and preventive servicing of water treatment plants Scope This ÖNORM specifies the scale, minimum requirements and the frequency of on-site monitoring of water treatment in swimming and bathing pools. ** End of Sector **

Information procedure Page 34 Monthly Notifications Register Notifications registered at CCMC from 2015-12-01 to 2015-12-31 Sector I MECHANICAL ENGINEERING Register issued on 2016-01-08

Subsector I01 SCREW THREADS Page 35 Subsector I01 Registration Date 2015-12-23 ID t2400061/0001 ICS 21.040.10 National Ref Fasteners-ISO Metric Screw Threads-Section 24-Limits of Sizes For Fine Screw Threads Within the Range 53 to 110 mm Nominal Diameter, Together, Together With the Commonly Used Tolerance Classes Scope This standard covers the limit of sizes, defined according to the tolerance classes, generaily used for ISO metric fine pitch screw threads with nominal diameters of 53 mm-110 mm which their basie profile is apprapriate to TS 61-20 for the smallest value given in TS 61-15 Rmin=0,125=P=H/7 and for the highest value the root radius. European Modified 13-242005 Subsector I01 Registration Date 2015-12-21 ID tst04701/0001 ICS 21.040.30, 75.200 National Ref Line Pipe Threads Scope This specification covers the threads of line pipe used for the transport of petroleum products and natutral gas, threads of couplings threads of various connection elements, and threads of accessories and instruments to be connected on the pipe line. International Modified API SPEC 5B2008 Subsector I01 Registration Date 2015-12-21 ID tst09185/0001 ICS 21.040.20 National Ref Unified screw threads- Nominal diameters below 1/4" - Nominal Dimensions and tolerances Scope This standard covers the unified screw threads having diameters of 1/4 " and below European Modified BS 1580-12007 Subsector I01 Registration Date 2015-12-21 ID tst09185/0001

Page 36 ICS 21.040.20 National Ref Unified screw threads- Nominal diameters below 1/4" - Nominal Dimensions and tolerances Scope This standard covers the unified screw threads having diameters of 1/4 " and below European Modified BS 1580-32007 Subsector I01 Registration Date 2015-12-21 ID tst09185/0001 ICS 21.040.20 National Ref Unified screw threads- Nominal diameters below 1/4" - Nominal Dimensions and tolerances Scope This standard covers the unified screw threads having diameters of 1/4 " and below European Modified BS 919-12007 Subsector I02 FASTENERS Subsector I02 Registration Date 2015-12-21 ASI Austria ID 00026674/0001 ICS 21.060.40 National Ref ÖNORM M 5300 Rivets - Technical specifications Scope This ÖNORM contains technical specifications for all standardized rivets, except blind rivets and studs for the field of aerospace. In addition to the information in the product standards rivets can be clearly identified through this technical specifications and the testing and acceptance can be set. For the supply of non-standardized rivets the application of this ÖNORM between client and contractor can be agreed. Subsector I02 Registration Date 2015-12-16 ID 06702150/0001 ICS 21.060.10 National Ref 267-2 Fasteners - Technical specification, surface roughness for product classes A and B

Page 37 Subsector I02 Registration Date 2015-12-16 ID 06702152/0001 ICS 01.040.21 National Ref 918 Fasteners - Terminology, spelling of terms, abbreviations Subsector I02 Registration Date 2015-12-15 ID tst10178/0001 ICS 43.040.10, 95.020 National Ref Electrical connectors between tractors and for military purposes Scope This standard covers the electrical connectors between tractors and trailer for military purposes. Subsector I04 ROLLING BEARINGS Subsector I04 Registration Date 2015-12-16 ID 11800488/0001 ICS National Ref 11800488 Rolling bearings - Cylindrical roller bearings - Part 1 Single row with cage, separate thrust collars Subsector I04 Registration Date 2015-12-16 ID 11800491/0001 ICS National Ref 11800491 Rolling bearings - Testing conditions for the experimental verification of the dynamic load rating of recirculation linear motion balls or roller bearings consisting of carriage and

profiled rails Page 38 Subsector I06 PRESSURE VESSELS Subsector I06 Registration Date 2015-12-22 BSI Draft Issue Date 2015-12-16 United Kingdom Latest Date for Comments 2016-02-29 ID 01503406/0001 Draft for public enquiry ICS National Ref PD 55002015+A2 PD 5500 AMD2. Specification for unfired fusion welded pressure vessels. Amendment Subsector I06 Registration Date 2015-12-21 ID tst08851/0001 ICS 23.020.10, 47.040 National Ref Vessel Supports - for Vertical Tanks - Dimensions, Rules of Construction and Calculation Scope This standard contains construction and calculation rules of vessel supports for vertical tanks. European Modified 28081-12015 Subsector I06 Registration Date 2015-12-21 ID tst08851/0001 ICS 23.020.10, 47.040 National Ref Vessel Supports - for Vertical Tanks - Dimensions, Rules of Construction and Calculation Scope This standard contains construction and calculation rules of vessel supports for vertical tanks. European Modified 28083-11987 Subsector I06 Registration Date 2015-12-31

ID tst10880/0001 ICS 13.220.20, 47.040, 47.060 National Ref Compensators - Steel expansion joints for gas pipe lines and installations Scope This standard, covers compesators from steel used in gas pipelines and installation for combustible gases (natural gas, citypas, LPG and mixed pases). European Modified 306812013 Page 39 Subsector I09 SMALL TOOLS Subsector I09 (Secondary Subsector) Registration Date 2015-12-23 ID tst13079/0001 ICS 03.080.30 National Ref Internet service providing - Terms and definitions Scope This standard includes, terms and definitions used for internet service providing. Subsector I09 (Secondary Subsector) Registration Date 2015-12-23 ID tst13080/0001 ICS 03.080.30 National Ref Internet service providing General rules Scope This standard includes, rules for technical properties required for internet service providing, informations should be provided, basic services and services should be given on network and legal responsibility. Subsector I18 MINING Subsector I18 Registration Date 2015-12-16 ID 00802343/0001 ICS

Page 40 National Ref 00802343 Rope end fitting in abutments for guide ropes - Safety requirements and testing Subsector I21 CHAINS AND CHAIN WHEELS Subsector I21 Registration Date 2015-12-01 AFNOR France ID 00193619/0001 ICS National Ref PR NF E26-020 Welded link chain round steel non calibrated non tested Subsector I27 EARTH MOVING AND CONSTRUCTION EQUIPMENT Subsector I27 Registration Date 2015-12-25 ID tst11530/0001 ICS 53.100 National Ref Earth Moving Machinery -Bushings for Crawler Tracks Scope This standard covers the bushings for the crawler tracks of the earth moving machinery. Subsector I28 FLUID POWER Subsector I28 Registration Date 2015-12-01 AFNOR France ID 00175424/0001 ICS National Ref PR NF E48-652 Hydraulic fluid power. Fluids. Determination of overall particulate contamination by the gravimetric method. REV/AMD NF E48-652199011 (E48-652)

Subsector I99 UNDETERMINED Page 41 Subsector I99 Registration Date 2015-12-15 ID tst11585/0001 ICS 49.100, 75.160.20 National Ref Aircraft arresting systems Scope This standard covers the aircraft arresting systems used in military airports. ** End of Sector **

Information procedure Page 42 Monthly Notifications Register Notifications registered at CCMC from 2015-12-01 to 2015-12-31 Sector M METALLIC MATERIALS Register issued on 2016-01-08

Subsector M01 STEEL Page 43 Subsector M01 Registration Date 2015-12-21 ASI Austria ID 00026654/0001 ICS 53.080, 97.130.10 National Ref ÖNORM B 4903 Multi-tier shelving installations Scope This ÖNORM applies for the construction, execution and use of multi-tier shelving installations, which are built independently from buildings into buildings. Subsector M01 Registration Date 2015-12-03 BSI Draft Issue Date 2015-11-26 United Kingdom Latest Date for Comments 2016-01-24 ID 01503402/0001 Draft for public enquiry ICS National Ref BS 44492005+A22009 BS 4449 AMD3. Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification. Amendment Subsector M15 METALLIC CORROSION Subsector M15 Registration Date 2015-12-16 ID 06234896/0001 ICS National Ref 06234896 Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects on profiled surfaces - Slurry test Subsector M18 METAL WIRE PRODUCTS Subsector M18 Registration Date 2015-12-15 ID tst11350/0001 ICS 95.020

Page 44 National Ref Scope The multi-channel Tactical digital gateway signalling standards This standard covers the multi channel tactical digital gateway signalling standards. Subsector M99 UNDETERMINED Subsector M99 Registration Date 2015-12-16 ID 14500111/0001 ICS National Ref 14500111 Sintered metal materials - Sintered-material specifications - Part 4 Materials for structural parts ** End of Sector **

Information procedure Page 45 Monthly Notifications Register Notifications registered at CCMC from 2015-12-01 to 2015-12-31 Sector N NON-METALLIC MATERIALS Register issued on 2016-01-08

Subsector N01 PAPER AND BOARD Page 46 Subsector N01 Registration Date 2015-12-16 ID 07400253/0001 ICS National Ref 07400253 Testing of paper and board - Determination of the smoothness by the Bekk method Subsector N03 PETROLEUM PRODUCTS Subsector N03 Registration Date 2015-12-16 ID 06234913/0001 ICS National Ref 06234913 Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 2 Determination of friction and wear data for lubricating oils Subsector N05 TEXTILES Subsector N05 Registration Date 2015-12-03 BSI United Kingdom ID 01503403/0001 ICS National Ref BS 40602006 Pressed Wool Felts. Specification. Corrigendum Subsector N05 Registration Date 2015-12-08 ID t0101170/0001 ICS 97.160 National Ref Quilt Scope This standard specifies the description, classification and characteristics, sampling, inspection

Page 47 and marketing of quilt Subsector N05 Registration Date 2015-12-08 ID t0101171/0001 ICS 97.160 National Ref Aleze for mattress and pillow Scope This standard specifies the description, classification and characteristics, sampling, inspection and marketing of aleze for mattress and pillow Subsector N05 Registration Date 2015-12-08 ID t0101172/0001 ICS 59.080.30 National Ref Non-woven felts Scope This standard specifies the description, classification and characteristics, sampling, inspection and marketing of non-woven felts. Subsector N05 Registration Date 2015-12-08 ID t0101173/0001 ICS 97.160 National Ref Pique Scope This standard specifies the description, classification and characteristics, sampling, inspection and marketing of pique Subsector N05 Registration Date 2015-12-31 ID t0104468/0001

Page 48 ICS 97.160 National Ref Viscoelastic foam mattress Scope This standard specifies the description, classification and characteristics, sampling, inspection and marketing of viscoelastic foam mattress. European Modified BS 5223-21999 Subsector N05 Registration Date 2015-12-23 ID t1013616/0001 ICS 59.060.20 National Ref Textiles - Polyester fiber - Specifications Scope This standard specifies the description, classification and characteristics, sampling, inspection and marketing of polyester fiber Subsector N05 Registration Date 2015-12-03 ID tst00465/0001 ICS 59.060.10 National Ref Standard Practice for Core Sampling of Raw Wool in Packages for Determination of Percentage of Clean Wool Fiber Present Scope This standard covers a procedure for obtaining samples from lots of grease, pulled, or scoured wool or related animal fibers in bales or bags for the determination of the clean wool fiber present International Modified ASTM D1060-102010 Subsector N05 Registration Date 2015-12-03 ID tst02793/0001 ICS 59.080.30 National Ref Textiles - Woollen woven fabrics - For use in outerwear Scope This standard specifies the description, classification and characteristics, sampling, inspection and marketing of woollen woven fabrics for use in outerwear.

Page 49 Subsector N05 Registration Date 2015-12-31 ID tst09364/0003 ICS 97.160 National Ref Foam mattress Scope This standard specifies the description, classification and characteristics, sampling, inspection and marketing of foam mattress. European Modified BS 5223-21999 Subsector N05 Registration Date 2015-12-03 ID tst09692/0002 ICS 61.020 National Ref Textiles-Bathrobe Scope This standard specifies the description, classification and characteristics, sampling, inspection and marketing of bathrobes Subsector N05 Registration Date 2015-12-08 ID tst10988/0001 ICS 59.080.30 National Ref Textile - Sportswear Fabrics - For Men and Boys - Knitted Scope This standard specifies the description, classification and characteristics, sampling, inspection and marketing of sportswear fabrics for men and boys knitted outerwear. Subsector N09 PLASTICS Subsector N09 Registration Date 2015-12-16 ID 05401740/0001 ICS National Ref 05401740 Plastics warning device for underground cables and pipelines - Part 3 Detectable tape

Page 50 Subsector N09 Registration Date 2015-12-25 ID t0104554/0001 ICS 83.140.99 National Ref Plastics moulded parts- Tolerances and acceptance conditions Scope This standard is about plastics moulded parts and their tolerances European Not Equivalent to 167422013 Subsector N09 Registration Date 2015-12-25 ID tst02902/0001 ICS 91.100.25 National Ref Glazed bricks Scope This standard specifies the definition, classification and properties, sampling, testing and marking of glazed brick units. Subsector N10 CORK Subsector N10 Registration Date 2015-12-04 IPQ Draft Issue Date 2015-11-16 Portugal Latest Date for Comments 2015-12-16 ID 01615214/0001 Draft for public enquiry ICS 55.100, 79.100 National Ref prnp 2803-3 Cork stoppers. Physical tests. Part 3 Relaxation test Scope This part of the Portuguese Standard 2803 specifies a test method for determining the relaxation force of the cylindrical natural and colmated cork stoppers, agglomerated cork stoppers, agglomerated cork stoppers with natural cork discs ("n" + "n") multi-pieces and agglomerated cork stoppers for sparkling and gaseous wines Subsector N13 LEATHER

Page 51 Subsector N13 Registration Date 2015-12-03 ID tst00225/0001 ICS 59.140, 59.140.30 National Ref Box-Calf and Rind-Box (Chrome Tanned Upper Leather) Scope This standard specifies the description, classification and characteristics, sampling, inspection and marketing of Box-Calf and Rind-Box. ** End of Sector **

Information procedure Page 52 Monthly Notifications Register Notifications registered at CCMC from 2015-12-01 to 2015-12-31 Sector S HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT Register issued on 2016-01-08

Subsector S01 ACOUSTICS AND SOUND INSULATION Page 53 Subsector S01 Registration Date 2015-12-21 ASI Austria ID 00026659/0001 ICS 91.120.20 National Ref ÖNORM B 8115-4 Sound insulation and room acoustics in building construction - Calculation of characteristic values for building acoustics and instructions for design Scope This Austrian Standard includes instructions for the calculation of characteristic values for room acoustics on the basis of existing international regulations. Furthermore, it gives planning and design instructions for building parts and combinations thereof. The methods and construction references presented constitute the basis for evidence of the implementation of requirements for building acoustics and/or of the assessment of technical sound suitability for building constructions. Subsector S04 PROTECTIVE CLOTHING AND EQUIPMENT Subsector S04 Registration Date 2015-12-03 SIS Draft Issue Date 2015-12-03 Sweden Latest Date for Comments 2016-03-03 ID 08760020/0001 ICS 11.140 National Ref 8760020 Healthcare textiles - Mattresses - Specifications and requirements Subsector S04 Registration Date 2015-12-18 SIS Sweden Latest Date for Comments 2016-02-14 ID 08760034/0001 ICS 11.140 National Ref 8760034 Health care textiles - Operating textiles - Operating theatre drapes (sterile) Scope This standard specifies requirements for sterile drapes intended to be used in operating theatre Subsector S04 Registration Date 2015-12-18 SIS Draft Issue Date 2015-12-14 Sweden Latest Date for Comments 2016-02-14

Page 54 ID 08760035/0001 ICS 11.140 National Ref 8760035 Health care textiles - Drapes Scope This standard specifies requirements for not sterile drapes intended for hospital use Subsector S07 ANAESTHETIC AND RESPIRATORY EQUIPMENT Subsector S07 Registration Date 2015-12-18 SIS Draft Issue Date 2015-12-14 Sweden Latest Date for Comments 2016-02-15 ID 08752430/0001 ICS 11.040.10 National Ref 8752430 Medical gas pipeline systems Connectors for medical gases Subsector S09 WATER QUALITY AND WATER SUPPLY Subsector S09 Registration Date 2015-12-21 ASI Austria ID 00026655/0001 ICS 13.060.01 National Ref ÖNORM ISO/TS 13530 Water quality - Guidance on analytical quality control for chemical and physicochemical water Analysis (ISO/TS 135302009) Scope ISO/TS 13530 provides comprehensive guidance on within laboratory and between laboratory quality control for ensuring the production of results with a known level of accuracy in the analysis of waters. ISO/TS 135302009 is applicable to the chemical and physicochemical analysis of all types of waters. It is not intended for application to the analysis of sludges and sediments (although many of its general principles are applicable to such analysis) and it does not address the biological or microbiological examination of water. Whilst sampling is an important aspect, this is only briefly considered. Subsector S09 Registration Date 2015-12-21 ASI Austria ID 00026656/0001

Page 55 ICS 13.060.70 National Ref ÖNORM M 6239 Sampling methods and devices for benthic fauna of inland waters Scope This ÖNORM specifies technical requirements for the selection of sampling-methods and devices (design, handling and field of application) for the assessment of soil fauna of inland waters. Subsector S09 Registration Date 2015-12-21 ASI Austria ID 00026657/0001 ICS 13.060.10, 13.060.70 National Ref ÖNORM M 6232 Guidelines for the ecological study and assessment of rivers (bilingual edition) Scope This Austrian Standard (ÖNORM) defines requirements to conduct ecological studies and assessments of the state in permanently or temporarily flowing surface waters. Subsector S09 Registration Date 2015-12-21 ASI Austria ID 00026658/0001 ICS 13.060.10, 13.060.70 National Ref ÖNORM M 6231 Guidelines for the ecological survey and evaluation of stagnant surface waters Scope This Austrian Standard (ÖNORM) defines requirements to conduct ecological studies and assessments of the state in standing surface waters. Subsector S09 Registration Date 2015-12-15 ID t0105022/0001 ICS 13.060.30 National Ref Ultrafiltration Modules Used in water treatment Scope This standard specifies definition, classification and specifications, sampling, inspection and test methods and supplying on market of ultrafiltration modules in water treatment.

Subsector S15 SURGICAL INSTRUMENTS Page 56 Subsector S15 Registration Date 2015-12-16 ID 02702832/0001 ICS National Ref 02702832 Medical instruments - Tenaculum forceps 1 1 teeth, straight Subsector S15 Registration Date 2015-12-16 ID 02702833/0001 ICS National Ref 02702833 Medical instruments - Vulsellum forceps 2 2 teeth, straight Subsector S15 Registration Date 2015-12-16 ID 02702834/0001 ICS National Ref 02702834 Medical instruments - Intestinal forceps type Allis Subsector S15 Registration Date 2015-12-16 ID 02702835/0001 ICS National Ref 02702835 Medical instruments - Dressing forceps type Maier, straight Subsector S15 Registration Date 2015-12-16

Page 57 ID 02702836/0001 ICS National Ref 02702836 Medical instruments - Dressing forceps type Maier, curved Subsector S15 Registration Date 2015-12-16 ID 02702840/0001 ICS National Ref 02702840 Medical instruments - Abdominal retractor type Fritsch Subsector S15 Registration Date 2015-12-16 ID 02702844/0001 ICS National Ref 02702844 Medical instruments - Dressing forceps Subsector S15 Registration Date 2015-12-16 ID 02702845/0001 ICS National Ref 02702845 Medical instruments - Organ grasping forceps Subsector S15 Registration Date 2015-12-16 ID 02702846/0001 ICS

Page 58 National Ref 02702846 Medical instruments - Kidney stone forceps type Randall Subsector S15 Registration Date 2015-12-16 ID 02702847/0001 ICS National Ref 02702847 Medical instruments - Gall stone forceps type Desjardins Subsector S15 Registration Date 2015-12-16 ID 02702850/0001 ICS National Ref 02702850 Medical instruments - Bone holding forceps Farabeuf's Subsector S15 Registration Date 2015-12-16 ID 02702853/0001 ICS National Ref 02702853 Medical instruments - Bone cutting forceps type Liston Subsector S15 Registration Date 2015-12-16 ID 02702854/0001 ICS National Ref 02702854 Medical instruments - Rongeur type Stille

Page 59 Subsector S15 Registration Date 2015-12-16 ID 02702855/0001 ICS National Ref 02702855 Medical instruments - Rongeur type Ruskin Subsector S15 Registration Date 2015-12-16 ID 02702856/0001 ICS National Ref 02702856 Medical instruments - Rongeurs type Luer Subsector S15 Registration Date 2015-12-16 ID 02702857/0001 ICS National Ref 02702857 Medical instruments - Rongeur type Beyer Subsector S15 Registration Date 2015-12-16 ID 02702865/0001 ICS National Ref 02702865 Medical instruments - Needle holder type Heaney

Page 60 Subsector S15 Registration Date 2015-12-16 ID 02702866/0001 ICS National Ref 02702866 Medical instruments - Neddle holder type De Bakey with carbide inserts Subsector S15 Registration Date 2015-12-16 ID 02702867/0001 ICS National Ref 02702867 Medical instruments - Haemostatic forceps type Adson Subsector S15 Registration Date 2015-12-16 ID 02702869/0001 ICS National Ref 02702869 Medical instruments - Sponge holding forceps type Förster Subsector S15 Registration Date 2015-12-16 ID 02702870/0001 ICS National Ref 02702870 Medical instruments - Dissecting forceps type Adson Subsector S15 Registration Date 2015-12-16 ID 02702872/0001

Page 61 ICS National Ref 02702872 Medical instruments - Needle holder type Mathieu - Part 2 With carbide inserts Subsector S15 Registration Date 2015-12-16 ID 02702873/0001 ICS National Ref 02702873 Medical instruments - Dissection forceps - Part 2 Curved Subsector S15 Registration Date 2015-12-16 ID 02702874/0001 ICS National Ref 02702874 Medical instruments - Tissue forceps - Part 2 Curved Subsector S15 Registration Date 2015-12-16 ID 02702875/0001 ICS National Ref 02702875 Medical instruments - Retractors type Israel Subsector S15 Registration Date 2015-12-16 ID 02702876/0001 ICS National Ref 02702876 Medical instruments - Retractors type Roux

Page 62 Subsector S15 Registration Date 2015-12-16 ID 02702878/0001 ICS National Ref 02702878 Medical instruments - Retractors type Weitlaner Subsector S15 Registration Date 2015-12-16 ID 02702879/0001 ICS National Ref 02702879 Medical instruments - Dressing forceps type Gross - Part 1 Straight Subsector S15 Registration Date 2015-12-16 ID 02702880/0001 ICS National Ref 02702880 Medical instruments - Dressing forceps type Gross - Part 2 Curved Subsector S15 Registration Date 2015-12-23 ID tst04020/0001 ICS 11.040.30 National Ref Surgical needles Scope This standard surgical needles definition, classification and characteristics, sampling, inspection and testing includes information about the shape of the market.

Page 63 International Modified ASTM A380/A380M2013 Subsector S15 Registration Date 2015-12-23 ID tst04020/0001 ICS 11.040.30 National Ref Surgical needles Scope This standard surgical needles definition, classification and characteristics, sampling, inspection and testing includes information about the shape of the market. International Modified ASTM F10892010 Subsector S15 Registration Date 2015-12-23 ID tst04020/0001 ICS 11.040.30 National Ref Surgical needles Scope This standard surgical needles definition, classification and characteristics, sampling, inspection and testing includes information about the shape of the market. International Modified ASTM F8992012 Subsector S18 STERILIZATION OF EQUIPMENT Subsector S18 Registration Date 2015-12-16 ID 06301748/0001 ICS National Ref 06301748 Sterilization - Low temperature sterilizers - Part 7 Requirements for the installation and operation of ethylene oxide sterilizers and their supply sources Subsector S19 FIRST AID EQUIPMENT AND RESCUE SYSTEMS Subsector S19 Registration Date 2015-12-01 AFNOR France

Page 64 ID 00193299/0001 ICS National Ref PR NF X08-017 Evaluation of light sources proximal color temperature Subsector S19 Registration Date 2015-12-15 ID tst10173/0001 ICS 11.160, 95.020 National Ref First aid kits and emergency medical care kits (for military use) Scope This standard covers the first aid kits and emergency medical care kits for military use. Subsector S21 LABORATORY MEDICINE, CLINICAL PATHOLOGY AND BIOSAFETY Subsector S21 Registration Date 2015-12-01 AFNOR France ID 00193342/0001 ICS National Ref PR NF S99-172 REV Use of medical devices - Risk management relative to the use of medical devices in health care establishments Subsector S24 SOIL QUALITY Subsector S24 Registration Date 2015-12-22 BSI United Kingdom ID 01503671/0001 ICS National Ref BS 84582015 Corrigendum Code of practice for the design of protective measures for methane andcarbon dioxide ground gases for new buildings. Corrigendum

Subsector S99 UNDETERMINED Page 65 Subsector S99 Registration Date 2015-12-03 BSI United Kingdom ID 01503411/0001 ICS National Ref BS 45004 Guidance for the application of ISO 45001 Occupational Health and SafetyManagement Systems Subsector S99 Registration Date 2015-12-16 ID 06301741/0001 ICS National Ref 06301741 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3 Reference method for the determination of the concentration of erythrozytes Subsector S99 Registration Date 2015-12-03 NEN Netherlands ID 50001947/0001 ICS 03.100.01, 13.100 National Ref NTA 86202015 Concept nl Specification of a safety management system for major accidents hazards Scope This NTA includes requirements for a safety management system to prevent major accidents hazards in which one or more hazardous materials are involved, and for the control of the consequences. ** End of Sector **

Information procedure Page 66 Monthly Notifications Register Notifications registered at CCMC from 2015-12-01 to 2015-12-31 Sector T TRANSPORT, MECHANICAL HANDLING AND PACKAGING Register issued on 2016-01-08

Subsector T01 SHIPBUILG AND MARITIME STRUCTURES Page 67 Subsector T01 Registration Date 2015-12-16 ID 13202735/0001 ICS National Ref 13202735 Exhaust gas lines on ships - Flanges - Part 1 Heavy design Subsector T02 AEROSPACE Subsector T02 Registration Date 2015-12-22 BSI United Kingdom ID 01503509/0001 ICS National Ref BS 4A 1141999+A22015 Corrigendum corrosion-resisting steel, mushroom-headed,slotted-drive, bolts, strength class 880 MPa. Corrigendum Subsector T02 Registration Date 2015-12-16 ID 13115534/0001 ICS 49.030.20 National Ref 65447 Aerospace series - Bihexagonal head bolts, close tolerance, with medium-length MJ thread, corrosion resisting nickel alloy - Nominal tensile strength 1550 MPa, for temperatures up to 315 C Subsector T03 ROAD VEHICLES Subsector T03 Registration Date 2015-12-25 ID tst00555/0001 ICS 43.040.40 National Ref

Scope Brake Lining for Road Vehicles This standard covers brake lining for road vehicles. Page 68 European Modified 154311980 Subsector T03 Registration Date 2015-12-25 ID tst00555/0001 ICS 43.040.40 National Ref Brake Lining for Road Vehicles Scope This standard covers brake lining for road vehicles. European Modified 15433-21992 Subsector T03 Registration Date 2015-12-25 ID tst00555/0001 ICS 43.040.40 National Ref Brake Lining for Road Vehicles Scope This standard covers brake lining for road vehicles. European Modified 154371989 Subsector T03 Registration Date 2015-12-25 ID tst00555/0001 ICS 43.040.40 National Ref Brake Lining for Road Vehicles Scope This standard covers brake lining for road vehicles. International Modified IS 27421969 Subsector T03 Registration Date 2015-12-25 ID tst00555/0001 ICS 43.040.40 National Ref

Scope Brake Lining for Road Vehicles This standard covers brake lining for road vehicles. Page 69 International Modified ISO 76291987 Subsector T03 Registration Date 2015-12-25 ID tst00555/0001 ICS 43.040.40 National Ref Brake Lining for Road Vehicles Scope This standard covers brake lining for road vehicles. International Modified JIS D 44111993 Subsector T03 Registration Date 2015-12-25 ID tst00555/0001 ICS 43.040.40 National Ref Brake Lining for Road Vehicles Scope This standard covers brake lining for road vehicles. International Modified SAE J 1602013 Subsector T03 Registration Date 2015-12-25 ID tst00555/0001 ICS 43.040.40 National Ref Brake Lining for Road Vehicles Scope This standard covers brake lining for road vehicles. International Modified SAE J 3792009 Subsector T03 Registration Date 2015-12-25 ID tst00555/0001 ICS 43.040.40 National Ref

Scope Brake Lining for Road Vehicles This standard covers brake lining for road vehicles. Page 70 International Modified SAE J 3802009 Subsector T03 Registration Date 2015-12-25 ID tst00555/0001 ICS 43.040.40 National Ref Brake Lining for Road Vehicles Scope This standard covers brake lining for road vehicles. International Modified SAE J 6612012 Subsector T03 Registration Date 2015-12-25 ID tst00555/0001 ICS 43.040.40 National Ref Brake Lining for Road Vehicles Scope This standard covers brake lining for road vehicles. International Modified SAE J 8402007 Subsector T03 Registration Date 2015-12-25 ID tst00555/0001 ICS 43.040.40 National Ref Brake Lining for Road Vehicles Scope This standard covers brake lining for road vehicles. International Modified SAE J 8662012 Subsector T03 Registration Date 2015-12-25 ID tst00582/0001 ICS 21.160 National Ref

Scope Leaf Springs for Road Vehicles This standard covers leaf springs for road vehicles. Page 71 European Modified BS EN 15612011 Subsector T03 Registration Date 2015-12-25 ID tst00582/0001 ICS 21.160 National Ref Leaf Springs for Road Vehicles Scope This standard covers leaf springs for road vehicles. European Modified 46211995 Subsector T03 Registration Date 2015-12-25 ID tst00582/0001 ICS 21.160 National Ref Leaf Springs for Road Vehicles Scope This standard covers leaf springs for road vehicles. International Modified SAE J 5101992 Subsector T03 Registration Date 2015-12-21 ID tst01143/0001 ICS 43.060.10 National Ref Piston Rings for Automotive Engineering Scope This standard covers piston rings for motor vehicles pistons. International Modified ISO 6621-32000 Subsector T03 Registration Date 2015-12-21 ID tst01143/0001 ICS 43.060.10 National Ref

Scope Piston Rings for Automotive Engineering This standard covers piston rings for motor vehicles pistons. Page 72 International Modified ISO 6621-42015 Subsector T03 Registration Date 2015-12-21 ID tst01143/0001 ICS 43.060.10 National Ref Piston Rings for Automotive Engineering Scope This standard covers piston rings for motor vehicles pistons. International Modified ISO 6622-12003 Subsector T03 Registration Date 2015-12-21 ID tst01143/0001 ICS 43.060.10 National Ref Piston Rings for Automotive Engineering Scope This standard covers piston rings for motor vehicles pistons. International Modified ISO 66232013 Subsector T03 Registration Date 2015-12-21 ID tst01143/0001 ICS 43.060.10 National Ref Piston Rings for Automotive Engineering Scope This standard covers piston rings for motor vehicles pistons. International Modified ISO 6624-12001 Subsector T03 Registration Date 2015-12-21 ID tst01143/0001 ICS 43.060.10 National Ref

Scope Piston Rings for Automotive Engineering This standard covers piston rings for motor vehicles pistons. Page 73 International Modified ISO 66251986 Subsector T03 Registration Date 2015-12-21 ID tst01143/0001 ICS 43.060.10 National Ref Piston Rings for Automotive Engineering Scope This standard covers piston rings for motor vehicles pistons. International Modified ISO 68261997 Subsector T03 Registration Date 2015-12-25 ID tst04420/0001 ICS 43.060.50 National Ref Starter Motor for Internal Combustion Engines Scope This standard covers starter motors which work at 12 or 24 nonimal voltages, mounted on spark or compression ignition internal combustion enginers of road whicles European Modified BS 4999-1471988 Subsector T03 Registration Date 2015-12-25 ID tst04420/0001 ICS 43.060.50 National Ref Starter Motor for Internal Combustion Engines Scope This standard covers starter motors which work at 12 or 24 nonimal voltages, mounted on spark or compression ignition internal combustion enginers of road whicles International Modified IEC 601361986 Subsector T03 Registration Date 2015-12-25 ID tst09264/0001

Page 74 ICS 43.040.20 National Ref Road Vehicles- Front Fog Lamps Scope This standard covers front fog lamps for motor vehicles. European Modified ECE R 192013 Subsector T03 Registration Date 2015-12-25 ID tst09264/0001 ICS 43.040.20 National Ref Road Vehicles- Front Fog Lamps Scope This standard covers front fog lamps for motor vehicles. International Modified SAE J 5732011 Subsector T03 Registration Date 2015-12-25 ID tst09264/0001 ICS 43.040.20 National Ref Road Vehicles- Front Fog Lamps Scope This standard covers front fog lamps for motor vehicles. International Modified SAE J 5752015 Subsector T03 Registration Date 2015-12-25 ID tst09264/0001 ICS 43.040.20 National Ref Road Vehicles- Front Fog Lamps Scope This standard covers front fog lamps for motor vehicles. International Modified SAE J 5762010 Subsector T03 Registration Date 2015-12-25 ID tst09264/0001

Page 75 ICS 43.040.20 National Ref Road Vehicles- Front Fog Lamps Scope This standard covers front fog lamps for motor vehicles. International Modified SAE J 5782012 Subsector T03 Registration Date 2015-12-25 ID tst09746/0001 ICS 43.040.40 National Ref Road Vehicles - Air Pressure Servise Brake Chamber With Diaphragm Scope This standard covers air pressure service brake chamber with diaphragm for road vehicles. European Modified ECE R 132008 Subsector T03 Registration Date 2015-12-25 ID tst09746/0001 ICS 43.040.40 National Ref Road Vehicles - Air Pressure Servise Brake Chamber With Diaphragm Scope This standard covers air pressure service brake chamber with diaphragm for road vehicles. International Modified SAE J 3182013 Subsector T03 Registration Date 2015-12-25 ID tst10447/0001 ICS 43.060.30 National Ref Road Vehicles - Engine Coolant Pump Face Seals - Application Scope This standard covers application of engine coolant pump face seals used in road vehicles. International Modified ANSI/ASME B 46.12009 Subsector T14 PACKAGING Subsector T14 Registration Date 2015-12-16

Page 76 ID 11501202/0001 ICS National Ref 11501202 Packaging - Complete, filled transport packages and unit loads - Requirements on mechanical transportation exposures and test procedures Subsector T16 LIFTS & ESCALATORS Subsector T16 Registration Date 2015-12-01 AFNOR France ID 00193618/0001 ICS National Ref PR NF E52-600 Building hoists - Terminology Subsector T19 ROAD SAFETY Subsector T19 Registration Date 2015-12-23 LVS Draft Issue Date 2015-12-30 Latvia Latest Date for Comments 2016-02-29 ID 00012274/0001 Draft for public enquiry ICS 93.080 National Ref prlvs 85 Road marking Scope The standard specifies shape, colour, size, technical requirements and installation rules of road marking REV/AMD LVS 85 Subsector T19 Registration Date 2015-12-23 LVS Draft Issue Date 2015-12-30 Latvia Latest Date for Comments 2016-02-29 ID 00012275/0001 Draft for public enquiry ICS 93.080 National Ref prlvs 77-3 Road signs Part 3 Technical requirements Scope The standard specifies size, shape, appearance of road signs and technical requirements for manufacture of road signs

Page 77 REV/AMD LVS 77-3 Subsector T19 Registration Date 2015-12-23 LVS Draft Issue Date 2015-12-30 Latvia Latest Date for Comments 2016-02-29 ID 00012276/0001 Draft for public enquiry ICS 93.080 National Ref prlvs 77-2 Road signs - Part 2 Regulation of installation Scope The standard specifies information concerning installation requirements for each road sign group REV/AMD LVS 77-2 Subsector T19 Registration Date 2015-12-23 LVS Draft Issue Date 2015-12-30 Latvia Latest Date for Comments 2016-02-29 ID 00012277/0001 Draft for public enquiry ICS 93.080 National Ref prlvs 77-1 Road signs - Part 1 Road signs Scope The standard specifies shape, colour, size, technical requirement and installation rules of road signs, used in Latvia REV/AMD LVS 77-1 Subsector T20 TRAM- AND RAILWAY ENGINEERING Subsector T20 Registration Date 2015-12-22 EVS Estonia ID 00088708/0001 ICS 45.060.01 National Ref prevs 930 Railway applications - Requirements for road-rail vehicles Scope Following standard describes technical, additional equipment and rail traffic requirements (including moving onto and away from railway) for road-rail vehicles, which are allowed to use in Estonia. Subsector T20 Registration Date 2015-12-22 EVS

Page 78 Estonia ID 00088709/0001 ICS 45.020 National Ref prevs 931 Railway applications - Written road and traffic permits, notices and tablebook forms used for coordinating railway traffic Scope This given standard establishes requirements in Estonian railway traffic (including shunting) regarding negotiations, commands, orders, documents and the description and usage of traffic safety documents used for coordinating railway traffic. ** End of Sector **

List of non-electrotechnical subsectors 2011-06 Sector A Services Subsector Title ISO/TC CEN/TC reference reference A01 Tourist services / 329; CEN/WS ETO A02 Cleaning services / 328 A03 Postal services / 331 A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM A05 Maintenance services / 319 A06 Building and construction services / 330 A07 Translation services / A08 Funeral services / CEN/BT/TF 139 A09 Facility management / 348 A10 Services of Real Estate Agents / CEN/BT/TF 180; 373 A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4 A12 Consultancy Services / 395; 381 A13 Expertise Services / 405 A14 Aesthetic Services / 403;409 A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B Building and construction Subsector Title ISO/TC CEN/TC reference reference B01 Fire protection 21 70; 72; 191; 192 B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340 B03 Concrete 71 104; CEN/WS 009 B04 Cement 74; 77 51 B05 Fire tests 92 127 B06 Gypsum / 241 B07 Glass 160 129 B08 Doors and windows 162 33 B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036 B10 Timber structures 165 124 B11 Metal structures 167 135 B12 Masonry 179; 196 125; 246 B13 Solar energy 180 312 B14 Geotechnics 182 341; 396 B15 Sanitary appliances / 163; 7 B16 Taps / / B17 Lighting equipment and lighting / 50; 169 application technology B18 Scaffolding / 53 B19 Ceramic tiles 189 67 B20 Drainage equipment / 165 B21 Baths / / B22 Wallcoverings / 99 B23 District heating / 107 B24 Auxiliary and handicraft work / / B25 Gas distribution installation and / 234; 235; 282 related equipment B26 Road building and maintenance / 178; 227 B27 Waterproofing materials / 128; 254; 361; 314 B28 Floor coverings 38/SC 12 134 B29 Aggregates / 154 B30 Floor and surfacing / 217; 303; 323; 390 B31 Heating systems in buildings / 228; 247 B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388 B34 Building and construction Environmental aspect 350; 351 B99 Undetermined / /

Sector C Chemicals, chemical engineering and food products Subsector Title ISO/TC CEN/TC reference reference C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054 C02 Paints and related products 35 139; 298; 173 C03 Chemistry 47 317; 363 C04 Laboratory glassware 48 332 C05 Lac / / C06 Essential oils 54 / C08 Pesticides 81 / C09 Surfactants 91 276 C10 Starch 93 / C11 Tobacco 126 401 C12 Glass plant / / C13 Fertilizers 134 223; 260 C16 Wood preservatives / / C17 Trees and plants / / C18 Adhesives / 193 C19 Chemical analysis 201; 202 382; 347 C20 Explosives and firework / 212; 321 C21 Cosmetics 217 392 C22 Bio-Based products / 411 C99 Undetermined / 386

Sector F Fundamental standards Subsector Title ISO/TC CEN/TC reference reference F01 Technical drawings 10 / F02 Units & symbols 12 / F03 Preferred numbers 19 / F04 Sieves 24 / F05 Measuring instruments 30; 113 92; 171; 176; 237; F06 Terminology principles 37 / 294; 318; 244; 367; 141; CEN/WS 011 F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368 F08 Surfaces / 290 F09 Banking 68 / F10 Statistics 69 / F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365 F13 Environmental tests / / F14 Graphical technology, 130 / sign-boards and nameplates F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033 F16 Graphical symbols 145 / F17 Administrative documents 154 CEN/WS MMU F18 Micrographics 171 / F19 Optics 172; 187 123; 170 F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362 F21 Value analysis and project / 279 network F22 Logistics / 379; 273 F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027 F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H Products for household and leisure use Subsector Title ISO/TC CEN/TC reference reference H01 Cinematography 36 372 H02 Photography 42 / H03 Consumer questions / 291 H04 Sports equipment 83 136 H05 Oil and gas burners / 47; 131 H06 Horology 114 / H07 Space heating 116 62; 110; 130; 179; 180 H08 Sizing systems 133; 137 / H09 Furniture 136 207 H10 Sewing machines 148 / H11 Heater controls 161 58 H12 Ceramic and glass-ware for food 166 / H13 Jewellery 174 CEN/WS 047 H14 Caravans 177 245 H15 Toys 181 52 H17 Oil stoves / 46 H18 Central heating boilers / 48; 57; 109; 269 H19 Non-electric cookers and barbecues / 49; 281; 295 H22 Smokers lighters and matches / 355; 87 H23 Ladders / 93 H24 Tactile danger warnings / / H25 Large gas appliances / 106; CEN/CLC/JWG FCGA H26 Sealing materials / 108; 208 H27 Educational equipment / / H28 Hunting 191 / H29 Heat pumps / 113 H30 Equipment for children / 252 H31 Dedicated LPG appliances / 181 H32 Culinary utensils 186 194 H33 Footwear (excluding protective / 309 footwear) H34 Child safety / CEN/BT/WG 117 398 H99 Undetermined / 299; 364; 369; 402

Sector I Mechanical engineering Subsector Title ISO/TC CEN/TC reference reference I01 Screw threads 1 / I02 Fasteners 2 185 I03 Limits & fits / / I04 Rolling bearings 4 / I05 Iron pipes 5 203 I06 Pressure vessels 11 54 I07 Shafts 14 / I08 Agricultural machines 23 144, 334 I09 Small tools 29 213 I10 Splines / / I11 Machine tools 39 142; 143; 145; 255 I12 Pulleys & belts 41 188 I13 Gas containers 58 23; 286 I14 Gears 60 / I15 Equipment for petroleum industry 67 12 I16 Internal combustion engines 70; 192 270 I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025 I18 Mining 82 196 I19 Nuclear energy 85 / I20 Refrigeration 86 44; 182 I21 Chains and chain wheels 100 / I22 Vacuum technology 112 / I23 Pumps 115 197 I24 Industrial fans 117 356 I25 Compressors 118 232 I26 Plain bearings 123 / I27 Earth moving and construction 127; 195 151 equipment I28 Fluid power 131 / I29 Gas cleaning / 195 I30 Air distribution / 156 I31 Valves 153; 185 69; 236; 105 I32 Flanges / 74 I33 Information processing in 184 310 automation I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152 I36 Thermoprocessing technology / 186 I37 Printing and paper machines / 198 I38 Leather production, tannery and / 200; 201 related machinery I39 Machines for metal processing / 202; 322 I40 Industrial piping networks / 267 I41 Membrane filters / 272 I42 Potentially explosive atmospheres / 305 I43 Hydrogen energy 197 / I44 Nanotechnologies 229 352 I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M Metallic materials Subsector Title ISO/TC CEN/TC reference reference M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110 M02 Zinc / 209 M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron M04 Copper 26 133 M05 Welding 44 121 M06 Dimensions of wrought products / / M07 Manganese and chromium 65 / M08 Light alloys 79 132 M09 Iron ores 102 / M10 Metallic coatings 107 240 M11 Powder metallurgy 119 / M12 Aluminium ores 129 / M13 Ferroalloys 132 / M14 Nickel 155 / M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101 M17 Heavy metal ores 183 / M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407 M20 Tin and tin alloys / 220 M21 Precious metals / 283 M22 Lead and lead alloys / 306 M99 Undetermined / /

Sector N Non-metallic materials Subsector Title ISO/TC CEN/TC reference reference N01 Paper and board 6 172 N02 Solid fuels 27 335; 343;383; CEN/WS 019 N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061 N04 Refractories 33 187 N05 Textiles 38 189; 248 N06 Rubber 45 218; 366 CEN/WS 003 N07 Sawn timber 55 38; 175 N08 Mica / / N09 Plastics 61 249 N10 Cork 87 / N11 Wood-based panels 89 112 N12 Timber products 99 / N13 Leather 120 289 N14 Plastics pipes 138 155 N17 Fluorspar 175 / N18 Glass-fibre reinforced plastics / / N19 Tapes / 253 N20 Ceramics 206 184 N21 Gaseous fuels and combustible gas 158; 193 238; 408 N22 Feather and related materials / 222 N23 Diamond / 410 N99 Undetermined / /

Sector S Health, environment and medical equipment Subsector Title ISO/TC CEN/TC reference reference S01 Acoustics and sound 43 126; 211 insulation S02 Transfusion equipment 76 / S03 Syringes 84 / S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043 S05 Dentistry 106 55 S06 Vibration & shock 108 231 S07 Anaesthetic and respiratory 121 215 equipment S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034 S10 Surgical implants 150 285; CEN/CLC/JWG AIMD S11 Contraceptives 157 / S12 Gas analysis / / S13 Ergonomics 159 122 S14 Prosthetics 168 / S15 Surgical instruments 170 / S16 Aids for the disabled 173 293 S17 Respiratory protective devices / 79 S18 Sterilization of equipment 198 102; 204 S19 First aid equipment and rescue systems / 239 S20 Waste collection, handling and / 183 transportation S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055 S22 Energy saving / CEN/WS 005 CEN/WS 015 S23 Personal & property protection against aggression/burglary protection / 263 S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics S26 Environmental management 207 CEN/TC 406; CEN/WS 040 S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120 S28 Demining / CEN/WS 029 CEN/WS 013 S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T Transport, mechanical handling and packaging Subsector Title ISO/TC CEN/TC reference reference T01 Shipbuilding and maritime 8; 188 15; 300 structures T02 Aerospace 20 274; AECMA; ECSS ;377 T03 Road vehicles 22 301; 326 CEN/WS IMA T04 Tyres 31 / T05 Pallets 51 / T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393 T07 Glass containers 63 / T08 Cranes 96 147 T09 Materials handling and 101 148; 149 storage equipment T10 Freight containers 104 119; 280 T11 Steel wire ropes 105 / T12 Industrial trucks 110 150; 324 T13 Lifting chains, hooks and ropes 111 168 T14 Packaging 122 261; 120 T15 Cycles 149 333 T16 Lifts & escalators 178 10; 242 T17 Builders hoists / / T18 Elevating platforms / 98 T19 Road safety / 226; 339 T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR T21 Packaging machines / 146 T22 Off-road vehicles / 354 T99 Undetermined / CEN/WS TAF

Sector Z Information technology Subsector Title ISO/TC CEN/TC Z01 Radiocommunication for IT / / Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI Z03 Common O.S.I. activities / CEN/CLC - EWOS Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS ego; CEN/WS ein; CEN/WS epr

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC December 2015 Issued on 8 January 2016

Page 1 Information Procedure on Standards Notifications registered at CCMC during December 2015 Sector V ELECTRONIC ENGINEERING Register issued on 8 January 2016

Subsector V24 INFORMATION TECHNOLOGY EQUIPMENT AND AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT AND SYSTEMS Page 2 Subsector V24 Registration Date 2015-12-21 ID t0104815/0001 ICS 29.060.20 National Ref 0,6/1 kv power cables with low density smoke, halogen free and long-term resistance to flame Scope This criteria applies to 0,6/1 kv power cables with low density smoke, halogen free and longterm resistance to flame, used indoors and outdoors. ** End of Sector **

Page 3 Information Procedure on Standards Notifications registered at CCMC during December 2015 Sector W ELECTRICAL ENGINEERING Register issued on 8 January 2016

ΘΕΜΑ: December 2015 Notification Procedure 1025/2012