PRODUCT CATALOGUE Gas & Air Quality Detectors Controllers Transmitters
Engineered gas and environmental monitoring solutions for industry. Austech is a full lifecycle solution provider of gas, flame and environmental monitoring instruments and systems. We bring together market leading gas instrumentation with our specialist engineering capabilities to deliver fully customised, fit for purpose systems. From universities to medical laboratories through to commercial car parks and hazardous environments, we can design a solution that is cost effective and compliant to relevant standards. OUR APPROACH Austech stand out as premier suppliers of gas detection instrumentation for commercial and industrial applications. Not only do we specialise in the development of leading technology, we work with our customers from initial concept design and system architecture through to site installation and commissioning. SYSTEM DESIGN Our highly trained and experienced engineers are leaders in their field and aim to deliver systems which exceed customer expectations. With a focus on fit for purpose, intelligent design and operational performance, Austech engineers specialise in industrial and commercial gas detection systems. PRODUCTS We have a superior range of gas instrumentation products that ensure optimum environmental management. Our range of detectors, controllers and ancillary are designed to meet industry standards and are fully customisable when configured into a system. Each component is available individually or integrated into a system configuration depending on your requirements. CUSTOMER SUPPORT Austech is committed to customer service and we are happy to answer any questions. Phone 1300 474 636 Email enquiries@austechgas.com.au 2
Index Air Quality Range Carbon Dioxide (CO 2 ) Detectors...4 Carbon Monoxide (CO) Detectors...4 HVAC&R Range - Wall Mount... 5-6 HVAC&R Range - Duct Mount...6 Multi-Air Quality...7 Industrial Gas Monitoring Toxic...7 Oxygen...8 Flammable...8 Refrigerant... 8-9 Extractive...9 SF6...9 Liquid...9 Portable Gas Monitoring...10 Hazardous Gas Monitoring Toxic... 10-11 Oxygen...11 Methane...11 Bio gas...11 Flammable...12 Hydrocarbon...13 Liquid...13 Centralised Monitoring and Control Controllers... 13-14 Customised Systems Systems...14 3
Air Quality Range Carbon Dioxide (CO 2 ) Detectors CO 2 safety alarms are critical in breweries, wineries, beverage dispensing areas, restaurants, fast food establishments, dry ice storage, storage tanks, laboratories, or anywhere CO 2 is stored or produced in high volume. WALL MOUNT SafeCellar CO 2 Detector/Controller with remote display unit WCD-CO2-X Additional temperature, alarm and optional O 2 detection CE approvals Stand alone system Up to 3 repeaters can be connected WALL MOUNT WALL MOUNT WALL MOUNT CO 2 Detector - Wall Mount WCD-S100/S101 Modbus and Analogue output CE approval 24 VDC/AC Carbon Monoxide (CO) Detectors iqguard Car Park Monitor CO and NO2 Detector Protected to IP54, allowing greater freedom of location iqguard premium quality Engineered to order BACnet CO Detector WCM-CO-1309C Carpark specification BACnet MSTP OLED screen with colour backlighting Long life sensor CE approval Often called the invisible killer, carbon monoxide is an odourless, colourless gas created when fuels (such as gasoline, wood, coal, natural gas, propane, oil, and methane) burn incompletely. WALL MOUNT CO Detector - Wall Mount WCM-CO-C101 Modbus RS485 CE approval 24 VDC/AC 4
CO Detector - Car Park WCD-CO-CP0X Modbus RS485 Works best with Austech Addressable System Controller 0-150ppm/0-500ppm/0-1000ppm HVAC&R Range BACnet CO 2 Detector - Wall Mount HWM-CO2-N10C/30C Series Optional temperature and relative humidity detection. Wall Mounted Temperature Detector HWM-BP-A2 Series With optional relative humidity detection. Temperature/Humidity Detector - Wall Mount HWM-TH Series Optional Modbus RS485 communication. HVAC CO 2 Detector - Wall Mount HWM-CO2-B10C/30C Series Optional temperature and relative humidity detection. Heating, ventilation, air conditioning and refrigeration (HVAC&R) can be a source of carbon dioxide. Both duct mount and wall mount options are available to monitor CO 2, and other air quality factors. WALL MOUNT WALL MOUNT WALL MOUNT WALL MOUNT WALL MOUNT CO 2 + Air Quality Detector - Wall Mount HWM-IAQ Series With VOC detection and optional temperature and relative humidity detection. WALL MOUNT 5
Air Quality Range HVAC&R Range WALL MOUNT WALL MOUNT CO 2 Detector/Controller with Alarm HWM-CO2-B3 Series With temperature and relative humidity detection. BACnet Commercial Thermostat/Controller HWM-F08-PSB Series 3-speed fan and valve control. DUCT MOUNT DUCT MOUNT DUCT MOUNT DUCT MOUNT CO 2 + Air Quality Detector - Duct Mount HDM-TG9-X182 Series With VOC detection and optional temperature and relative humidity detection. CO 2 Detector - Duct Mount HDM-TG9XX8 Series With optional temperature and relative humidity detection. Temperature/Relative Humidity Detector HDM-THP/TH9 Series Wall and duct mounting. Temperature/Relative Humidity Detector - Duct Mount HDM-KZWS/FZA2 Real time measurement of temperature and relative humidity inside the air duct. 6
Multi-Air Quality Designed to monitor air quality data and green building evaluation. These products are able to measure multiple parameters in a cost effective single package with high accuracy. Air Radio Indoor Air Quality Detector MAQ-A1 Series PM2.5, CO 2, TVOC, air temperature and relative humidity Wifi with iphone app Talk Alert - CO and Flammable Gas Detector MAQ-HD3100 Ceiling mounted for applications such as nursing homes and apartments. Indoor Air Quality Detector HWM-MAQ Green Building Series PM2.5, PM10, CO 2, TVOC, air temperature and relative humidity Modbus or wi-fi Industrial Gas Monitoring iqguard Toxic Gas Detectors Easy to install, use and maintain Display or non-display, stainless steel Intrinsically safe, suitable for Zone 0, 1 and 2 hazardous areas iqguard Toxic Gas Detector Additional temperature, alarm and optional O 2 detection. Industrial gas detection is important in a range of industries. Different types of detectors monitor toxic, refrigerant, flammable and bio gases among others. DESK CEILING MOUNT CEILING MOUNT TOXIC TOXIC 7
Industrial Range Industrial Gas Monitoring OXYGEN OXYGEN iqguard Oxygen Depletion Detectors Easy to install, use and maintain. Display or non-display, stainless steel or moulded PVC enclosures iqguard Compost Management System Designed specifically for forced airation type compost piles Oxygen and temperature monitoring Oxygen 2-25% v/v, temperature 0-100 C FLAMMABLE iqguard 79-2500 Infrared Gas Detectors Ex d Group 2 certified Certified flameproof IEC Ex with optional relays No hot work permit required for calibration as it can be done without opening the lid REFRIGERANT FLAMMABLE iqguard 61-X303LC Series Infrared Gas Detectors Ex d Group 2 certified Wide range of gas types including CO 2, CH 4 and special sensitivity types for defence and marine. iqguard Infrared Refrigerant Leak Detector Detect specific refrigerant gas leaks and a broad range of refrigerant gas types. Stainless steel housing Designed for R22, R134a, R407c, R410a refrigerants for early low level leaks 8
Chillgard M-100 Photoacoustic Infrared Refrigerant Sensor Designed to detect the presence of the most common halogenated refrigerants in cold storage facilities Chillgard RT Photoacoustic Infrared Refrigerant Monitor Provides economical, low-level monitoring of refrigerant gases Uses remote sampling technique COSMOS Extractive Gas Detector Gas detection system for semiconductor manufacturing plants Compact and lightweight with east to read LCD display Constant flow control Ethernet and Device Net available CE and SEMI approvals BIONICS Extractive Gas Detector Self diagnostic and continuous Intelligent sensor assembly permits quick and simple off-site calibration Wide range of gases available WIKA SF6 Leak Detector Infrared indoor air monitoring for SF6 gas 0 ~ 2,000 ppm Smart interface Built in reliable pump with automatic flow control BIONICS SF6 Leak Detector Electrochemical extractive gas sampling system Compact wall mount design Infrared model available Liquid Leak Detection System Digital system for leak detection and location identification Various length digital sense cables available, with wall or rack mount addressable units Available for hazardous areas High level interface and mimic screens Suitable for data centres and clean rooms REFRIGERANT REFRIGERANT EXTRACTIVE EXTRACTIVE SF6 SF6 LIQUID 9
Industrial Range Industrial and Hazardous Gas Monitoring Altair Pro PORTABLE PORTABLE Single Gas Detector Simple intuitive operation, small rugged design and dependable technology Industry leading sensor life Intrinsically safe IEC Ex ia IIC T4 Up to 13 different gas options available Altair 5X Multi Gas Detector With MSA XCell Sensor Technology Wide range of gases available Highest sensor life in industry Intrinsically safe certified IEC Ex ia Hazardous Gas Monitoring International and Australian certified intrinsically safe or flame proof gas detectors for hazardous areas where flammable gases may be present. FLAMMABLE iqguard Catalytic Gas Detector 61-X203LX SERIES Display and non-display options Direct connect technology allows coupling to iqguard Micro 4000 controller without any need of amplifiers FLAMMABLE iqguard Catalytic Gas Detector 61-X203LC Series Analogue signal transmission Detects wide range of flammable gases Suitable for hydrogen FLAMMABLE iqguard Infrared Gas Detector 61-X303LC Series Ex d Group 2 certified Wide range of gas types including CO 2, CH 4 Special sensitivity types for defence and marine 10
iqguard Infrared Gas Detector 79-2500 Series Ex d Group 2 certified Certified flameproof Display version with back lighting Integrated weather guard Remote sensor option iqguard Catalytic Gas Detector 79-2500 Series Ex d Group 2 certified Certified flameproof Designed to detect hydrogen gas and other flammables ULTIMA-X IR Gas Monitor Microprocessor-based, infrared point gas detector for continuous monitoring of combustible and carbon dioxide gases and vapours. Dura Source TM technology SIL2 certified Remote sensor option PRIMA-X IR Gas Transmitter Offers LEL (Lower Explosive Limit) combustible gas detection. Wide range of detectable gases SIL2 capable SS316 steel enclosure Analogue, modbus and HART output Ultrasonic Gas Leak Detection - MSA With robust microphone technology; they detect outdoor leaks by sensing the distinct high frequency ultrasound emitted by all high pressure gas leaks Flameproof certified (IEC Ex) stainless steel housing Suitable tank farms and FPSOs FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE FLAMMABLE iqguard Methane Analyser System Designed for landfill gas, coal seam methane and bio gas power generation IEC Ex certified for Zone 1 hazardous areas Accurately measures methane Continuous operation at low flow METHANE iqguard Modular Extractive Gas Analysis Designed for landfill gas, coal seam methane and bio gas power generation IEC Ex certified for Zone 1 hazardous areas Complete system with sample conditioning and pump METHANE 11
Hazardous Area Range OXYGEN iqguard Oxygen Depletion Detectors Easy to install, use and maintain Display or non-display, stainless steel Intrinsically safe, suitable for Zone 0, 1 and 2 hazardous areas PRIMA-X Gas Monitor for Toxic Gases TOXIC Intrinsically-safe detection of toxic gases or oxygen. Available in explosion-proof and intrinsically-safe versions. Plugin replacement sensor is IP66 rated SIL2 certification HART option FLAME/SMOKE Flamegard-UVIR - MSA Ultraviolet and infrared flame detection provides high immunity to false alarms IEC Ex certified for flameproof versions SIL3 suitable Modbus with optional HART FLAME/SMOKE FLAME/SMOKE Flamegard-MSIR - MSA Four IR sensors plus Neural Network Technology equal superior false alarm rejection IEC Ex certified for flameproof versions SIL3 suitable Modbus with optional HART Millennium Smoke and Oil Mist Detector - Emerson Air Particle Monitor - APM Constant, reliable monitoring of ambient air for products of combustion such as smoke, oil mist, carbon, dust and ash Analogue, modbus output with relays ABYSS Online BioGas Analysers BIO GAS Specially designed for continuous and simultaneous monitoring of primary bio gas constituents CH 4, CO 2, O 2 and H 2 S. ProCeas BioGas Online Monitoring Systems BIO GAS Complete pre-calibrated multi-component (H 2 S, CO 2 and CH 4 ) laser Infrared Spectrometer designed for online monitoring of bio gas primary constituents in industrial methanation processes. 12
ULTIMA OPIR-5 Open path gas detector for Hydrocarbon Gas Detection. Two ranges, 2000ppm or 5000ppm and 0-5 LELM or 0-1 LELM Also available for propane Up to 150m path length No calibration required HART, modbus and analogue outputs HYDROCARBON Liquid Leak Detection System Digital system for leak detection and location. Various length digital sense cables available, and wall or rack mount addressable units Available for hazardous areas LIQUID Centralised Monitoring and Control iqguard 12 Channel Controller Accommodates 12 gas detectors. The controller has twelve 4-20mA inputs, two 4-20mA outputs and four relay outputs. Optional zone card Optional relays per channel Optional analogue re-transmission per channel Optional modbus, BACnet and ethernet. iqguard Micro 4000 Controller 4 channel micro processor controller. Available in standard, HVAC and flameproof versions. Standard modbus available Optional ethernet and BACnet IP or MSTP AS1668 fan control logic iqguard 2400 Series System Controller 24 channel expandable, micro-processor controlled monitoring and alarm system. RS485 modbus protocol. Fan control logic option Zone control option Analogue re-transmission option Ethernet and BACnet options CONTROLLER CONTROLLER CONTROLLER Stand Alone Oxygen Depletion and Toxic Gas Detector/Controller CMC-SA01 Series Single channel standalone detector and controller. Wide range of gases available Data logging built in Alarm mute and fan control outputs CONTROLLER 13
Centralised Monitoring and Control Centralised Monitoring and Control CONTROLLER Modular, Multi-Channel Monitoring System CMC-SAE01 Series Expandable - Single channel to multiple channels Wall mount or rack mount Modbus standard, optional BACnet IP or BACnet MSTP 240VAC or 24VDC stand alone models available CONTROLLER Addressable System Controller Relay outputs for alarm events and programmed responses RS485 Modbus digital interface Accommodates up to 30 gas detectors Single cable for field sensors Auto address assigned to Austech CO sensors SYSTEM CONTROLLER Touchpro Series Modular controllers - multi-channel monitoring system Expandable - choice of 12, 24 or 36 channels Zone function with voting logic Individual relays per channel Analogue re-transmission signals Modbus, BACnet and other protocols available Customised Systems iqguard series with integrated sample pump Designed for confined spaces Easy operation with reliable pump SYSTEM SF6 Monitoring Solutions Multipoint or single point Stand alone systems with high level interface Ethernet or any protocol 14
Notes 15
Austech is a member of the Ampcontrol Group of Companies Austech Unit 2/71 Prince William Drive Seven Hills NSW 2147 Phone 1300 474 636 www.austechgas.com.au