Kiwa Nederland B.V. Unit Appliances & Controls, Unit Automotive, Unit Gasdistribution Materials and Unit ExVision

Similar documents
Kiwa Nederland B.V. Unit Appliances & Controls, Unit Automotive, Unit Gasdistribution Materials and Unit ExVision

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

Test procedure/ method name. method identification. Testing of industrial and explosion isolation valves and tank lining

STS Directory Accreditation number: STS 0009

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

This annex is valid from: to Replaces annex dated: Prolonged until

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. F2 LABS Peters Road Middlefield, OH Wendy Fuster Phone: Ext.

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Rules for Classification and Construction Additional Rules and Guidelines

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

This is a preview - click here to buy the full publication ICS ISBN

INTERNATIONAL STANDARD

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

AUGUST 2016 CONTENTS:

Spark Extinguishing Systems

Compliance Engineering Ireland Ltd

This is a preview - click here to buy the full publication

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

This annex is valid from: to Replaces annex dated: Imposed suspension for the crossed out activities as of

CERTIFICATE OF ACCREDITATION

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

This annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1

EU Declaration of Conformity Annex

INTERNATIONAL STANDARD

To Whom it May Concern;

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

Annex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005

EU Declaration of Conformity Annex

INTERNATIONAL STANDARD

TECHNICAL SPECIFICATION AUTOMATIC SINGLE POLE AND THREE POLE CIRCUIT BREAKERS FOR LV SUPPLIES

Motor Controller AC Semiconductor Motor Controller Type RSBS23..A2V.2C24

Leadax B.V. Covenant K93792/02. Leadax

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Annex to declaration of accreditation (scope of accreditation) Normative document: EN ISO/IEC 17065:2012 Registration number: C 001

Hong Kong Association for Testing, Inspection and Certification Ltd. S.W.N. Ho. (Electrical Products Testing)

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

INTERNATIONAL STANDARD

EMC Bayswater Pty Ltd

INTERNATIONAL STANDARD

BRL-K618/ Evaluation Guideline. for the Kiwa product certificate for Water meters

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

INTERNATIONAL STANDARD

EC-Declaration of Conformity

SKG-IKOB Certificatie B.V. Trading under the names SKG, IKOB-BKB and SKW Certificatie

EU Declaration of Conformity Annex

ACMA mandated EMC standards

INTERNATIONAL STANDARD

SPECIFICATION FOR GAPLESS METAL OXIDE DISTRIBUTION TYPE SURGE ARRESTERS WITH POLYMERIC HOUSING

Audible warning devices for external alarm

INTERNATIONAL STANDARD

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

CE EMC Test Report EN :2015 EN :2017. Folder with powerbank ZKS E. Lieber Ouyang (Engineer) Lahm Peng (Manager)

AS/NZS :2003 Luminaires - Part 1: General requirements and tests

Thermo-Sealer. Manual Heat Sealer. User Manual

USER-MANUAL Tamson Cool Cube Immersion Cooler

Evaluation Guideline. regarding the Product Certificate GASKEUR Label HR (High Efficiency, Heating):2010 for Central Heating Appliances

Instructions for use / Alarm unit, Fiber optic cable & Sensor patch ENGLISH

Compliance Engineering Ireland Ltd

Motor Controller AC Semiconductor Motor Controller Type RSBS23..A2V.2C24..

ANSI-ASQ National Accreditation Board/ACLASS

This document is a preview generated by EVS

INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD

BRL-K14008/ Evaluation guideline. for the Kiwa product certificate for Cartridges to be used for sanitary tapware: Mechanical mixers

Soft Starter AC Semiconductor Motor Controller Type RSBS23..A2V.2C24..

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

INTERNATIONAL STANDARD

Installation instructions

This document is a preview generated by EVS

INTERNATIONAL STANDARD

GASTEC QA. Approval Requirements 136

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Transcription:

nnex to declaration accreditation (scope accreditation) Unit ppliances & Controls, Unit utomotive, Unit Gasdistribution Materials and Unit This annex is valid from: 15-11-2017 to 01-10-2018 Replaces annex dated: 08-11-2017 Sir Winston Churchill-laan 273 2288 E Rijswijk The Netherlands Location(s) where activities are performed under accreditation Head Office Location bbreviation/ location code Hodlocatie Wilmersdorf 50 7327 C peldoorn The Netherlands Tests in conformity with method Internal reference numbers 1 Energy Products & Indirect efficiency IRN 01 Systems 2 Combustion CO/CO2 IRN 02 3 Flow gas/air IRN 03 4 Temperature (flue) gas IRN 05 5 Energy input (gas) IRN 06 6 Pressure IRN 07 7 Combustion test NO/NO2/NOx IRN 71 This annex has been approved by the Board the Dutch ccreditation Council, on its behalf, J..W.M. de Haas Director Operations 1 If there is a referral to a scope (Sxxx), this constitutes a scheme an accepted scheme owner. The accepted version is mentioned on the concerning scope the scheme owner. Raad voor ccreditatie Pagina 1 van 9

nnex to declaration accreditation (scope accreditation) Unit ppliances & Controls, Unit utomotive, Unit Gasdistribution Materials and Unit 8 Energy Products & Combustion test smooth ignition IRN 72 Systems 9 Flow liquid IRN 73 10 Temperature (surface and materials) IRN 74 11 Temperature liquid IRN 75 12 Energy input (oil) IRN 76 13 Energy output (thermal) IRN 77 14 Energy input (electrical) IRN 78 15 Determination sound power level IRN 83 in accordance with NEN-EN-ISO 3743-1 16 Electrical s, components and installations Testing the immunity behaviour to supply voltage variations 17 Testing the immunity behaviour to supply frequency variations IRN 12 IRN 13 18 Testing the immunity behaviour to surges IRN 14 19 Testing the immunity behaviour to electrical fast transients 20 Testing the immunity behaviour to conducted disturbances 21 Testing the immunity behaviour to radiated disturbances 22 Testing the immunity behaviour to electrostatic discharge 23 Testing the immunity behaviour to power frequency magnetic field 24 Testing the immunity behaviour against harmonics and interharmonics on the supply voltage IRN 15 IRN 16 IRN 17 IRN 18 IRN 19 IRN 63 Raad voor ccreditatie Pagina 2 van 9

nnex to declaration accreditation (scope accreditation) Unit ppliances & Controls, Unit utomotive, Unit Gasdistribution Materials and Unit 25 Electrical s, components and installations Testing the emission conducted disturbances (max 1 GHz) 26 Testing the emission radiated disturbances frequency area 30 MHz-1000 MHz IRN 20 IRN 21 27 Testing the emission harmonic currents 28 Testing and assessment voltage fluctuations and flicker impressed on the public low voltage system IRN 22 IRN 23 29 Heating IRN 24 30 Overload IRN 25 31 bnormal operation IRN 26 32 Electric power and current input IRN 27 33 Electric strength IRN 28 34 Leakage current IRN 29 35 Earth resistance IRN 30 36 Tracking IRN 31 37 Ball-pressure IRN 32 38 Glow-wire IRN 33 39 Needle flame IRN 34 40 Protection against access to live and moving parts IRN 35 41 Impact resistance IRN 36 42 Pull/push force and torque IRN 37 43 Torque Testing IRN 38 Raad voor ccreditatie Pagina 3 van 9

nnex to declaration accreditation (scope accreditation) Unit ppliances & Controls, Unit utomotive, Unit Gasdistribution Materials and Unit 44 Electrical s, components and installations Creepage distances, clearances and distance through insulation IRN 39 45 Endurance/Thermal stress test IRN 40 46 Normal operation/functional test IRN 41 47 Protection against internal faults (stware evaluation) IRN 42 48 Water and Dust Testing IRN 43 49 Humidity testing IRN 44 50 Environmental stress IRN 45 51 Determination explosion pressure (reference pressure) 52 Test for non-transmission an internal ignition IRN 80 IRN 81 53 Spark ignition test IRN 82 54 Voltage/Current measurement IRN 84 55 Hydrostatic testing IRN 85 56 Flammability testing IRN 86 57 Gas & Liquid Pressure test IRN 46 58 carrying s components and Flow test IRN 47 materials 59 Time test IRN 48 60 Mass measurement IRN 49 61 Force measurement IRN 50 62 Torque measurement IRN 51 63 Leakage measurement IRN 52 64 Sensory observation IRN 53 Raad voor ccreditatie Pagina 4 van 9

nnex to declaration accreditation (scope accreditation) Unit ppliances & Controls, Unit utomotive, Unit Gasdistribution Materials and Unit 65 Gas & Liquid Resistance measurement IRN 54 66 carrying s components and Dimensional aspects IRN 55 materials 67 DSC measurements IRN 56 68 Flow and pressure drop testing IRN 57 69 Force and torque IRN 58 70 Leak tightness IRN 59 71 Mass/volume measurements IRN 60 72 Melt flow rate IRN 61 73 Vicat stening temperature IRN 62 74 Visual aspects IRN 64 75 Electrical characteristics IRN 65 76 TG measurements IRN 66 Raad voor ccreditatie Pagina 5 van 9

nnex to declaration accreditation (scope accreditation) Unit ppliances & Controls, Unit utomotive, Unit Gasdistribution Materials and Unit Item a-h as given below shows the relation between the test activities 1-83 as mentioned above and the standards, directive and/or approval requirements in which the test activity is included a Energy s ctivity IRN 01 up to and including IRN 03, IRN 05 up to and including IRN 07, IRN 71 up to and including IRN 78, IRN 83 as far as relevant in the following documents b Duct systems ctivity IRN 05, IRN 07, IRN 59, IRN 74, as far as relevant in the following documents EN 26, EN 30-1-1, EN 30-1-2, EN 30-2, EN 30-2-1, EN 30-2-2, EN 89, EN 203-1, EN 203-2, EN 203-3, EN 297, EN 303-1, EN 303-3, EN 303-4, EN 416-1, EN 419-1, EN 449, EN 461, EN 483, EN 484, EN 497, EN 498, EN 509, EN 521, EN 613, EN 621, EN 625, EN 656, EN 676, EN 677, EN 732, EN 778, EN 1020, EN 1196, EN 12102; EN 12309-1, EN 1319, EN 13202-1, EN 13202-2, EN 13836, EN 1458-1, EN 1596, EN 14511, EN 14825, EN 15036-1, EN 15417, EN 15420, EN 15502-1, EN 15502-2-1, EN 16147, GSKEUR CV, CV-HR, CV-SV, CV-HRww, NZ, WV, WD, LV, LV- HR, LV-SV, GSTEC Q KE 174, GSTEC Q KE 175, NEN-EN 50465 SNS 1539 NSF/NSI 4 GSTEC Q KE 19, GSTEC Q KE 83, GSTEC Q KE 138, GSTEC Q KE 166, KOMO BRL 5101, KOMO BRL 5102, NEN 7203, EN 7207, EN 1859 Raad voor ccreditatie Pagina 6 van 9

nnex to declaration accreditation (scope accreditation) Unit ppliances & Controls, Unit utomotive, Unit Gasdistribution Materials and Unit c EMC testing on household and similar electrical s (HOUSE), controls (CON) and installations ctivity IRN 12 up to and including IRN 23, IRN 63 as far as relevant in the following documents EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 55014-1, EN 55014-2, EN 55011, EN 55022 (max 1 GHz), EN 61000-3-3, EN 61000-3-2 (restricted to Class equipment and measured in accordance with EN 61000-4-7), UN R10, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-7, EN 61000-4-8, EN 61000-4-11, EN 61000-4-15, EN 13611, EN 12067-2, EN 14459, EN 298, EN 230, EN 1643 d LVD testing on household and similar electrical s (HOUSE), controls (CON) and installations ctivity IRN 24 up to and including IRN 45 and IRN 84 up to and including IRN 86 as far as relevant in the following documents EN/IEC 60335-1 and part: 2-6, 2-9, 2-13, 2-15, 2-21, 2-24, 2-30, 2-31, 2-35, 2-36, 2-37, 2-38, 2-39, 2-42, 2-47, 2-48, 2-50, 2-75, 2-78, 2-80, 2-89, 2-102 EN/IEC 60730-1 and part: 2-5, 2-9, EN/IEC 60950-1, EN 60204-1, EN 60529 (only IP00 t/m IP66), EN-IEC 61558-1 and part: 2-6, 2-16: 2010 (+1:2013), EN 13611, EN 12067-2, EN 14459, EN 298, EN 230, EN 1643, EN/IEC 62368-1, EN/IEC 62790 Raad voor ccreditatie Pagina 7 van 9

nnex to declaration accreditation (scope accreditation) Unit ppliances & Controls, Unit utomotive, Unit Gasdistribution Materials and Unit e Gas & Liquid carrying components for ppliances, Distribution and Installations ctivity IRN 46 up to and including IRN 66 as far as relevant in the following documents Regulation (UNECE) No 67, Regulation (UNECE) No 110, ISO 15500, ISO 15540, ISO 15541, EN 88, EN 125, EN 126, EN 161, EN 257, EN 13611, EN 1106, EN 1643, EN 1854, EN 12078, EN 12067-1, EN 331, EN 1555-1, EN 1555-2, EN 1555-3, GSTEC Q KE 10, GSTEC Q KE 11, GSTEC Q KE 31, GSTEC Q KE 35, GSTEC Q KE 52, GSTEC Q KE 53, GSTEC Q KE 58, GSTEC Q KE 69, GSTEC Q KE 69(1), GSTEC Q KE 70, GSTEC Q KE 91, GSTEC Q KE 96, GSTEC Q KE 136, GSTEC Q KE 165, GSTEC Q KE 171, GSTEC Q KE 176, GSTEC Q KE 186, GSTEC Q KE 187, GSTEC Q KE 194, GSTEC Q KE 198, GSTEC Q KE 201, NSI Z21.18/CS 6.3, NSI Z21.78/CS 6.20, NSI Z21.21/CS 6.5, NSI Z21.15, CS 9.1 Raad voor ccreditatie Pagina 8 van 9

nnex to declaration accreditation (scope accreditation) Unit ppliances & Controls, Unit utomotive, Unit Gasdistribution Materials and Unit f utomotive ctivity IRN 46 up to and including IRN 54 as far as relevant in the following documents Regulation (UNECE) No 67, Regulation (UNECE) No 110, ISO 15500, ISO 15540, ISO 15541, ISO 15995, NSI NGV 3.1/CS 12.3, NSI PRD 1, ISO 14469-1, ISO 14469-2, ISO 14469-3, Regulation EU 406/2010 NSI NVG1 CS NVG1 g Energy Products & Systems ctivity IRN 03, IRN 05, IRN 06, IRN 07, IRN 27, IRN 73, IRN 74, IRN 75, IRN 78 as far as relevant in the following documents ENERGY STR Program Requirements for Commercial Ovens; Eligibility Criteria for Commercial Combination Ovens STM F 2861-10 h Equipment for explosive atmospheres ctivity IRN 03, 07, 24, 25, 26, 27, 28, 29, 30, 31, 34, 36, 37, 40, 43, 45, 49, 50, 52, 54, 58, 59, 65, 80, 81 en 82 as far as relevant in the following documents EN/IEC 60079-0, -1, -2, -5, -6, -7, -11, -15, -18, -25, -26, -27, -28, -31, EN 13463-1, -2, -3, -5, -6, -8 Raad voor ccreditatie Pagina 9 van 9