Temperature & Humidity Model No. (ACM-7892-S)
Model No. (ACM-7892-S) TEMPERATURE & HUMIDITY CONTROL CABINET Product Overview Humidity & Temperature Control Cabinet are well designed for conducting different laboratory and research experiments for different quality control tests to be carried out on different materials e.g. cement, motors, various electrical fittings, electronic circuits and components, cloth and paper etc. under controlled temp. and Construction Details Weiber Humidity and Temperature controlled cabinets are double walled convection heated and cooled units. Outer body of our Humidity and Temperature controlled cabinets are constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder heavy gauge stainless steel sheet of SS-34 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our chambers. The unit is provided with one door. This door is provided with magnetic door closer. The door is made of mild steel sheet lined with stainless steel from inside.. This door is provided with lock humidity conditions. coated.. The inner chamber is made of and key arrangement. The unit is ACMAS TECHNOCRACY PVT. LTD. www.measuring-meters.com www.acmasindia.com www.scientificlaboratoryequipments.com
Humidity Range 3% to 9% (For more details refer to graph) Humidification A low-pressure droplet free vapor boiler Humidity Sensitivity Humidity is controlled by mean of an electronic humidity controller cum indicator with an accuracy of + 5% Temperature Control we have the capacity to modify the same to suit the individual specialized requirements of our customers. Temperature Sensitivity: Temperature inside our environmental using direct vaporization system is The temperature inside our chambers chambers are controlled with a mounted on a sturdy steel frame The unit is provided with various customized shelves in various permutations and combinations to suit individual requirements.. The triple walled back of our Humidity and Temperature controlled cabinets are Heating Indirect heating system is provided in our units, comprising of air heaters made of high grade stainless steel plate heating system of suitable wattage.. The warm air is evenly distributed throughout the chamber through Cooling An energy efficient cooling unit is installed in our echambers to enable bio chemical demand, cyclic and growth studies at lower room temperatures. We use ISI marked high end CFC free compressors of used. Water Reservoir is provided at the side of the chamber with. The demineralized water or single distilled water supply to the humidity inlet having a resistance measurement of approximately 5, - 2, Ohm/cm is provided with the unit is controlled through programmable micro-processor based temperature controller cum indicator. Temperature Range. Temperature range of our standard walk in Incubator models are 5o c to 6o c or 5o c above ambient temperature to 6o c However sensitivity of +.5o c or better. Front Panel Front panel of our units comprises of on/off switches heating, cooling and mains indicator lamps, temperature controllers and voltmeters provided with one/ two air circulation efficient motor fans ensuring a very Kirloskar/Tecumseh make, conforming fans for uniform maintenance of the good temperature sensitivity. to latest international standards and temperature throughout the chamber. guidelines. ACMAS TECHNOCRACY PVT. LTD. www.measuring-meters.com www.acmasindia.com www.scientificlaboratoryequipments.com
Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator. P r e s s u r e d i e - c a s t e d - r o t o r manufactured with zero error. Refrigeration Unit Refrigeration unit is formed by ISI marked compressor/cooling kit. Of Kioloskar Copeland or Tecumseh. Features : Boats of high accuracy High Energy Efficiency Compact Mineral Glass Wool Insulation Glass mineral wool is one of the most environmentally friendly, stable and sustainable insulants available. Glass wool is incombustible by nature. Euro class classification is A. It does not propagate flames and toxic smokes. The thickest it is, the best thermal resistance it has, thus reducing heat losses in our equipments for better sensitivity and economical operations. And its impact on the environment in manufacture, use and disposal is minimal. Features of Coaxial Circulation Fan: Vacuum impregnated stator winding with dr. back varnish under red baktol non-hygroscopic. Best IR value Bright bar (EN - 8 class) shaft. Size of Inner chamber :- W x H x D (a) 455 x 71 x 455 mm (b) 65 x 65 x 65 mm (c) 65 x 91 x 65 mm Ozone-friendly refrigerants Proven Technology Wide Voltage Range Thanks to a dense entanglement of Air circulation: B u s h b e a r i n g o f b r a n d e d materials with a low conduction and Triple walled back of unit is fitted with companies. trapping a great amount of air, glass two air circulation fans for maintaining wool is a an excellent thermal insulant. temperature uniformly throughout the chamber ACMAS TECHNOCRACY PVT. LTD. www.measuring-meters.com www.acmasindia.com www.scientificlaboratoryequipments.com
APPLICATION Evaporating Temp Range Refrigerant Refrigerant Control Compressor Cooling General Applications -6 Degree C R- 134a CAPILLARY STATIC REFRIGERATOR/ DEEP FREEZER MECHANICAL DATA Design Displacement/Revolution No. of Cylinders Speed (Nominal) Oil Charge RECIPROCATING 3.14 CC One N/A 23 CC RATED PERFORMANCE Weight Internal Pressure 7.3 Kgs PROVIDED Relief Valve Cooling Capacity -Rated 282-65 Btu/hr (Model specific) Power input -Rated Energy Efficiency Ratio 8-11 Watts (Model Specific) 3.53 Btu/Whr MOTOR DATA Current - Rated LRA -Rated Evaporating Temperature Condensing Temperature Liquid Sub Cooling Temp Return Gas Temperature Ambient Temperature.7 Amps N/A -23.3C 54 C Motor Type Frequency Phase Voltage -Rated Voltage -Range High Potential Test PTCSIR 5 Hz SINGLE 23 Volts N/A N/A Pressure - Suction.32 Kg/Cm2 OVER LOAD PROTECTOR Pressure - Discharge 12.9 Kg/Cm2 Liquid Sub Cooling Temp Type EXTERNAL Return Gas Temperature Ambient Temperature Pressure - Suction.32 Kg/Cm2 Pressure - Discharge 12.9 Kg/Cm2
Technical Matrix Temperature Control Temperature variation (time) ± C.2 Temperature deviation (spatial) ± C.5 Readability/ Set ability C.5 Temperature range *** C 5 C to 6 C /5 C above ambient ot 6 C Sensor thermocouple Type K Controller Solid State digital Controller/PID optional Display LED/LCD Adjustable alarm limits Optional (visual & acoustic) Safety thermostats Temperature variation (time) ± C 3 (With PID Controllers only) Sensor thermocouple Type K Automatic setting Yes (With PID Controllers only) Adjustable limits Yes (With PID Controllers only) Inspection window in door optional Technical Matrix Shelves Standard/ max 2-6 (depending on the internal size Dimensions w,d mm As per the individual model Max load per shelf kg 2 Permitted total load kg 8 kg (Max Internal Size) Accessories Printer Report Program optional 2 x 24 characters LCD Display optional Access Port 3 mm optional Inspection window in door with cover optional Castors, lockable Yes Power consumption Nominal power W 85 Nominal voltage V 23, 1~ Frequency Hz 5/6 ACMAS TECHNOCRACY PVT. LTD. www.measuring-meters.com www.acmasindia.com www.scientificlaboratoryequipments.com
Universal Digital Data Recorder with Computer Optional Upgrades For Environmental chamber (If Desired) Provides Astech cable for direct It is provided with the feature to nterface to any dot matrix or adjust or select baud rate for laser printer for online or offline any serial communication port. data records printing Data Acquisition And Control System and formatted with the help of our record of the performance of the It has Bulk data storage capacity Our system is provided with user For Environmental Chamber. unique user friendly analysis software equipment is very essential. with high data retention life. friendly custom developed software to enable the user to get a formatted Features Facility to obtain nicely formatted which obtains and analyze the data and This is unique module which can be and analyzed reports of various inputs Our system incorporates multiple print our of the logged data o r facilitates the user to generate reports incorporated with our environmental during the full operation cycle of the D e v i c e s s u c h a s i n l i n e records with proper headers. and graphs etc. chamber to log in temperature and equipment. This is an ideal module for process Indicators, environment Our system provided facility to environment related data with a help of pharmaceutical laboratories, process scanners and temperature o r program recording interval a data logger unit which has a pc control applications and high research humidity controllers. with various options to suit connectivity by means of RS 2 projects where maintaining a viable individual requirements. interface. This data is then analyzed
We are having Representatives in 55 Countries please visit our International Dealers Section to contact your nearest ACMAS Representative TECHNOLOGY with HUMAN TOUCH TECHNOCRACY PVT. LTD.
An ISO 91:228 ISO 141:28 ISO 13485 WHO:GMP Products GLP Compliant Products www.acmasindia.com www.scientificlaboratoryequipments.com www.measuring-meters.com TECHNOCRACY PVT. LTD. SALES OFFICE (INDIA) 312-313, Vardhman Capital Mall, L.S.C. 1, GulabiBagh, Delhi-1152, INDIA Tel: 91-11-2364673, 2364354 (M) +91-9313971681 Email: india@acmasindia.com SALES OFFICE (HONG KONG) Unit D 28 11/f Wing Tat Comm, Bldg 97, Bonham Strand East, Sheung Wan, HONG KONG (PRC). Tel: 86-1392959846 86-189223399 Email: hk@acmasindia.com SHOWROOM 141, Rai Industrial Estate, Rai, Sonepat, Haryana-13129, INDIA Tel: 91--9312219738 (M) +91-9717741167 Email: info@acmasindia.com SALES OFFICE (RUSSIA) Inmed Trade Street, Ozerkovsky Embankment, Unit No 5 Straine-1, Off-52, Moscow, RUSSIA Tel: 49-79592345 Email: russia@acmasindia.com