DETECTION AREA Active Infrared Sensor OA-EDGE1/EDGE Recommended installation position Leading edge d3 w Pivot edge W Door widt Mounting eigt / d Detection area widt d3 Distance from te leading edge to te sensor module Distance from te pivot edge to te sensor module n Number of sensor modules 1800 (5'11") 1900 (6'3") 000 (6'7") 100 (6'11") 00 (7'3") 300 (7'7") 400 (7'11") 500 (8'") d 480 (1'7") 510 (1'8") 55 (1'9") 545 (1'10") 560 (1'10") 590 (1'11") 605 (1'1") 65 ('1") d W 914 (36") d 80 (11") 90 (11 7/16") 300 (11 13/16") 310 (1 3/16") 30 (1 5/8") 330 (13") 340 (13 3/8") 350 (13 3/4") d3 10 (4")* n 1067 (4") n 10 (4") 15 (6") unit : mm (inc) 119 (48") n 9 (9") Te actual detection area may become smaller depending on te ambient ligt, te color / material of te object or te floor as well as te entry speed of te object and selection of inactive area.
DETECTION AREA Active Infrared Sensor OA-EDGE EU Detection area at 00mm (7' 5/8") : Dept 140 (5 1/") x Widt 8 (' 10") Emitting area at 00mm (7' 5/8") : Dept 140 (5 1/") X Widt 440 (1' 5 1/") Te actual detection area may become smaller depending on te ambient ligt, te color / material of te object or te floor as well as te entry speed of te object. Recommended installation position d Leading edge unit : mm (inc) d DIN 18650 Test body CA 1800 (5'11") 1900 (6'3") 000 (6'7") 100 (6'11") 00 (7'3") 300 (7'7") 400 (7'11") 500 (8'") 730 ('5") 760 ('6") 790 ('7") 85 ('9") 8 ('10") 895 ('11") 90 (3') 950 (3'1") ( 3/4") ( 3/4") ( 3/4") ( 3/4") ( 3/4") ( 3/4") ( 3/4") ( 3/4") d Mounting eigt Detection area widt Distance from te leading edge to te sensor module
DETECTION AREA Active Infrared Sensor OA-EDGE T Detection area at 00mm (7' 5/8") : Dept 140 (5 1/") x Widt 8 ('10") Test conditions required by EN 16005 Detection object : EN 16005 CA reference body Emitting area at 00mm (7' 5/8") : Dept 140 (5 1/") X Widt 440 (1' 5 1/") Te actual detection area may become smaller depending on te ambient ligt, te color / material of te object or te floor as well as te entry speed of te object. Recommended installation position d Leading edge W d3 EN 16005 CA reference body W Door widt Mounting eigt Detection area widt d Distance from te leading edge to te sensor module d3 Distance between sensor modules n Number of sensor modules unit : mm (inc) W 900 ('1") d n d3 1900 (6'3") 000 (6'7") 100 (6'11") 00 (7'3") 300 (7'7") 400 (7'11") 500 (8'") 760 ('6") 790 ('7") 85 ('9") 8 ('10") 895 ('11") 90 (3') 950 (3'1") ( 3/4") ( 3/4") ( 3/4") ( 3/4") ( 3/4") ( 3/4") ( 3/4") 175 (6 7/8") 160 (6 3/8") 145 (5 6/8") 15 (5") 115 (4 1/") 110 (4 1/") 110 (4 3/8") 1100 (3'7") n d3 375 (14 3/4") 355 (14") 345 (13 5/8") 30 (1 5/8") 315 (1 3/8") 310 (1 /8) 300 (11 6/8") 100 (3'11") n d3 475 (18 5/8") 460 (18 1/8") 445 (17 1/") 40 (16 4/8") 415 (16 /8") 410 (16 1/8") 400 (15 3/4") For instaltion eigts <1900mm te installation of an extra module will be mandatory in order to comply wit te regulations.
SPECIFICATIONS Active Infrared Sensor OA-EDGE1/EDGE Model * Extrusion color Mounting eigt Detection area Detection metod Min. configuration Max. configuration Dept angle adjustment Power consumption Output ** Output old time Response time Operating temperature Operating umidity IP rate : OA-EDGE1 / OA-EDGE : Silver / Black : 1.5 (4'11") to 3.0m (9'10") : See DETECTION AREA : Triangulation : 1 master module +1 LED module : 4 sensor modules + LED modules : 0 to +5 : 1 to 4VAC ±10% (50 / 60 Hz) 1 to 30VDC ±10% : < 1.3W (< VA at AC) at Min. configuration < 3.5W (< 4.5VA at AC) at Max. configuration : See cart below : Voltage / 4VDC Current / 0.3A Max (Resistance load) : Approx. 0.5 sec. : <75msec. : -0 to +55 C (-4 to 131 F) : <80% : IP54 Accessories Silver self tap screw for extrusion ----------- pcs Silver wood screw for extrusion -------------- pcs Black small screw for endcap ---------------- 4pcs Black large screw for wire sroud cover ------------ pcs (4pcs***) Wire sroud -------------------------------------- 1pcs Wire sroud cover --------------------- 1pcs (pcs***) cable ---------------------------- 1pcs Communication cable ------------- Refer to matrix Manual --------------------------------------------- 1pcs Model OA-EDGE 1 OA-EDGE Sensor lengt 13.5 34.5 40 44 34.5 40 44 Cable lengt 105 50 480 900 (4") (10") (19") (35") 1pcs 1pcs - - - 1pcs 1pcs - - 1pcs - 1pcs - 1pcs - 1pcs 1pcs 1pcs 1pcs - 1pcs 1pcs 1pcs - 1pcs 1pcs 1pcs - * : OA-EDGE1 ave 1 sensor module (Master only). OA-EDGE ave sensor modules (Master + Slave). ** : Tere are two types of output. (Reactivate & Stall) *** : Tis is only OA-EDGE1 13.5 Status Stand-by Opening side detection (output 1) Closing side detection (output ) Incomplete Initialization Learning Wiring Incomplete learning Signal saturation Sensor failure Communication error Sensor module indicator Solid Green Solid Red Solid Orange Red & Blinking Green Red blinking Blinking Yellow Yellow Slow Green & Red blinking Slow Red blinking Twice Fast Green Red blinking Twice Orange blinking LED module indicator Te color depends on te state of te output. ON : Solid Red Safety / Test output ON : Solid Orange To te power supply connector of te master module 1.Wite.Brown 3.Green 4.Yellow 5.Grey 6.Pink 7.Blue 8.Red 1 to 4VAC±10%, 1 to 30VDC±10% Output Form c relay Reactivate (Approac side) Output1 Form c relay Stall (Swing side)
SPECIFICATIONS Active Infrared Sensor OA-EDGE EU Profile color Mounting eigt Detection metod Min. configuration Max. configuration Dept angle adjustment Power consumption Safety / Test output Output old time Response time Operating temperature Operating umidity IP rate : Silver / Black : 1.5 (4'11") to 3.0m (9'10") : Triangulation : 1 master module +1 LED module : 4 sensor modules + LED modules : 0 to +5 : 1 to 4VAC ±10% (50 / 60 Hz) 1 to 30VDC ±10% : < 1.3W (< VA at AC) at Min. configuration < 3.5W (< 4.5VA at AC) at Max. configuration : See cart below : Opto coupler 10 to 30VDC Current / 6mA Max. : Voltage / 4VDC Current / 0.3A Max (Resistance load) Output : see drawing below : Approx. 0.5 sec. : <75msec. : -0 to +55 C (-4 to 131 F) : <80% : IP54 * : Te sensor as to be connected to a door system is equipped wit a SELV circuit. Te overcurrent protection of power supply cable as to be less tan A. Status Stand-by Opening side detection (output 1) Closing side detection (output ) Incomplete Initialization Learning Wiring Incomplete learning Signal saturation Sensor failure Communication error To te power supply connector of te master module Sensor module indicator Solid Green Solid Red Solid Orange Red & Blinking Green Red blinking Blinking Yellow Yellow Slow Green & Red blinking Slow Red blinking Twice Fast Green Red blinking Twice Orange blinking 1.Wite.Brown 3.Green 4.Yellow 5.Grey 6.Pink 7.Blue 8.Red 9.Black 10.Violet LED module indicator Te color depends on te state of te output. ON : Solid Red Safety / Test output ON : Solid Orange 1 to 4VAC ±10%, 1 to 30VDC ±10% Safety / Test output Reverse impulse (Closing side) Stop impulse (Opening side) Opto coupler / Voltage: 10 to 30VDC
SPECIFICATIONS Active Infrared Sensor OA-EDGE T Profile color Mounting eigt Detection metod Min. configuration Max. configuration Dept angle adjustment Power consumption Safety / Test output Output old time Response time Operating temperature Operating umidity IP rate Noise level Category Performance level : Silver / Black : 1.5 (4'11") to 3.0m (9'10") * : Triangulation : 1 master module +1 LED module : 4 sensor modules + LED modules : 0 to +5 : 1 to 4VAC ±10% (50 / 60 Hz) 1 to 30VDC ±10% : < 1.3W (< VA at AC) at Min. configuration < 3.5W (< 4.5VA at AC) at Max. configuration : See cart below : Opto coupler 10 to 30VDC Current / 6mA Max. : Voltage / 4VDC Current / 0.3A Max (Resistance load) Output : see drawing below : Approx. 0.5 sec. : <75msec. : -0 to +55 C (-4 to 131 F) : <80% : IP54 : <dba : (EN ISO13849-1 : 008) : d (EN ISO13849-1 : 008) * : To comply wit DIN18650 to install te sensor at 1.8m (5'11") to.5m (8'"). * : Te sensor as to be connected to a door system is equipped wit a SELV circuit. Te overcurrent protection of power supply cable as to be less tan A. Status Stand-by Opening side detection (output 1) Closing side detection (output ) Incomplete Initialization Learning Wiring Incomplete learning Signal saturation Sensor failure Communication error To te power supply connector of te master module Sensor module indicator Solid Green Solid Red Solid Orange Red & Blinking Green Red blinking Blinking Yellow Yellow Slow Green & Red blinking Slow Red blinking Twice Fast Green Red blinking Twice Orange blinking 1.Wite.Brown 3.Green 4.Yellow 5.Grey 6.Pink 7.Blue 8.Red 9.Black 10.Violet LED module indicator Te color depends on te state of te output. ON : Solid Red Safety / Test output ON : Solid Orange 1 to 4VAC ±10%, 1 to 30VDC ±10% Safety / Test output Reverse impulse (Closing side) Stop impulse (Opening side) Opto coupler / Voltage: 10 to 30VDC
OUTER DIMENSIONS Active Infrared Sensor OA-EDGE 1/EDGE -EDGE EU/EDGE T 44.3 (1 3/4") X Minimum 340mm 50.7 (") Unit:mm(inc)