QUALITY SINCE 1967 CALIDAD DESDE 1967 Q U A L I T E D E P U I S 1 9 6 7
QUALITY SINCE 1967 CALIDAD DESDE 1967 Q U A L I T E D E P U I S 1 9 6 7 MISSION STATEMENT Innovation, Quality, Service and Reliability for over 40 years L = Loyalty A = Affordability M = Marketability B = Branding R = Recognition O = Outstanding In fond memory of our Founder Edwin Eddie Berger president (800) 645-2860
Dryer (#1375W Packaging) Dryer Venting Lambro manufactures a complete line of clothes dryer venting products designed to meet the clothes dryer manufacturers requirements. Our products are used by professional installers and do-it-yourselfers. Lambro s dryer venting categories consist of complete installation kits, flexible UL Listed laminated and aluminum semi-rigid transition ducts, accessories, vents, rigid pipes and elbows needed to complete the installation of your clothes dryer. Products listed are recommended to safely vent your clothes dryer. Please read and follow all manufacturers warnings and instructions supplied with your clothes dryer. Verify and comply with local building codes. Bathroom (#354R Packaging) Bathroom Venting Lambro manufactures a complete line of bathroom venting products to properly vent your bathroom fan. Products in this category can also be used in general air distribution in other areas of the home. Lambro s bathroom venting categories consist of complete installation kits, flexible laminated and aluminum semi-rigid ducts, accessories, vents, rigid pipes and elbows needed to complete the installation of your bathroom fan. Flexible UL Listed laminated and aluminum semi-rigid transition ducts and kits can also be used to vent bathroom fans. Please read and follow all manufacturers warnings and instructions supplied with your bathroom fan. Verify and comply with local building codes. Kitchen (#378 Packaging) Kitchen Venting Lambro manufactures a complete line of kitchen venting products to properly vent your range hood or downdraft. Lambro s kitchen venting categories consist of complete installation kits, accessories, vents, rigid ductwork, rigid pipes and elbows needed to complete the installation of your kitchen vent. The minimum size duct allowed on most range hoods is 3 ¼" by 10" which is equivalent to a 6" round. Please read and follow all manufacturers warnings and instructions supplied with your range hood or downdraft. Verify and comply with local building codes. 1 (800) 645-2860
HVAC Components Lambro manufactures a complete line of HVAC venting products to properly vent your forced air heating and cooling systems. Lambro s HVAC venting categories consist of complete installation kits, accessories, vents, flexible UL and non UL Listed laminated and aluminum semi-rigid ducts, flexible UL Listed insulated ducts, rigid ductwork, rigid pipes and elbows needed to complete the installation of your HVAC venting requirements. Please read and follow all manufacturers warnings and instructions supplied with your product you are venting. Verify and comply with local building codes. Appliance Accessories Lambro manufactures two sizes of washing machine trays fitting under standard or oversized washing machines. Our trays fit under front or top load and double stacked washing machines. The trays are non breakable and include a drain fitting. Verify and comply with all local building codes. (#136) (#126L) (#1780) (#1020L) Appliance HVAC Color Coded Packaging Lambro has color coded its entire line of retail packaging thereby enhancing the ease with which you can locate a specific product on a retail shelf. Dryer Venting Bathroom Venting Kitchen Venting HVAC Components Appliance Accessories Packaging www.lambro.net 2
Dryer STANDARD ducts have greater installation flexibility COMPLETE KITS Safely vent your clothes dryer using our UL Listed laminated transition duct kit. UL Listed laminated transition ducts are flame resistant, and can be used in applications where semi-rigid and rigid duct will not work. If you are not sure what venting components to purchase to complete the installation of your clothes dryer, then you should purchase a complete kit. Our kits include all components needed to properly vent from the clothes dryer exhaust to the outside. kits below can be used to vent 4 bathroom fans (#1375W Packaging) Kits Include Laminated Transition Duct flexible laminated transition duct vent kits 1359W 4 x 8 Louvered Vent Kit 2 package: polybag 1 - louvered vent w/ tail pipe 1 - UL listed laminated transition duct 2 - tension clamps item kit size color qty package 1369B 4 x 5 brown 12 polybag 1369W 4 x 5 white 12 polybag 1359B 4 x 8 brown 12 polybag 1377B 4 x 5 brown 10 retail box 1377W 4 x 5 white 10 retail box 1379B 4 x 8 brown 10 retail box 1379W 4 x 8 white 10 retail box Louvers prevent outside elements from entering the vent 1363W 4 x 8 Preferred Hood Vent Kit 0 package: polybag 1 - preferred hood w/ tail pipe 1 - removable screen 1 - UL listed laminated transition duct 2 - tension clamps item kit size color qty package 1365B 4 x 5 brown 10 polybag 1365W 4 x 5 white 10 polybag 1363B 4 x 8 brown 10 polybag 1373B 4 x 5 brown 10 retail box 1373W 4 x 5 white 10 retail box 1375B 4 x 8 brown 10 retail box 1375W 4 x 8 white 10 retail box Preferred hood opening allows for maximum airflow from the dryer while a removable screen keeps outside elements from entering the vent 3 (800) 645-2860
QUALITY SINCE 1967 PREFERRED ducts withstand higher temperatures COMPLETE KITS We recommend using one of our UL Listed semi-rigid transition duct vent kits to safely and properly vent your clothes dryer. Our UL Listed semi-rigid transition ducts are made using a triple lock design which creates an air tight seam while providing strength and flexibility. UL Listed semi-rigid transition ducts can withstand a higher heat tolerance for today s larger size clothes dryers. Our kits include all the components needed to safely vent from the clothes dryer exhaust to the outside. CALIDAD DESDE 1967 Q U A L I T E D E P U I S 1 9 6 7 kits below can be used to vent 4 bathroom fans Kits Include Semi-Rigid Transition Duct flexible aluminum semi-rigid transition duct vent kits 313WUL 4 x 8 Louvered Vent Kit 1 - louvered vent w/ tail pipe 1 - UL listed semi-rigid transition duct 2 - worm gear clamps item kit size color qty package 312BUL 4 x 5 brown 1 single pack 312WUL 4 x 5 white 1 single pack 313BUL 4 x 8 brown 1 single pack Louvers prevent outside elements from entering the vent 316WUL 4 x 8 Preferred Hood Vent Kit 1 - preferred hood w/ tail pipe 1 - removable screen 1 - UL listed semi-rigid transition duct 2 - worm gear clamps item kit size color qty package 315BUL 4 x 5 brown 1 single pack 315WUL 4 x 5 white 1 single pack 316BUL 4 x 8 brown 1 single pack Preferred hood opening allows for maximum airflow from the dryer while a removable screen keeps outside elements from entering the vent www.lambro.net 4
Dryer flexible aluminum semi-rigid duct vent kits 3000 4 x 8 Quick Connect Vent Kit pack qty: 3 package: polybag 2 - UL listed semi-rigid transition duct 2 - aluminum adjustable elbows 1 - clean-out connector 1 - dryer exhaust extender 4 - worm gear clamps Space saving quick connect kit Duct joins together with twopiece Easy-Clean connector Reduces clearance between dryer and wall Kits Include Semi-Rigid Transition Duct 4005 4 x 8 Quick Connect Vent Kit pack qty: 4 package: polybag 1 - UL listed semi-rigid transition duct 1 - elbow A 1 - dryer exhaust extender 2 - worm gear clamps Space saving quick connect kit No clamp needed, rubber gasket secures elbow to dryer exhaust outlet Kits Include Semi-Rigid Transition Duct 4004 4 x 8 Quick Fit Vent Kit pack qty: 4 & display tray 1 - elbow A 1 - elbow B 1 - wall outlet plate 1 - flexible semi-rigid duct No clamp needed, rubber gaskets secure elbow A to dryer exhaust outlet & elbow B to wall plate outlet 349L 4 x 8 All Metal Vent Kit pack qty: 3 package: polybag 1 - aluminum hood w/ tail pipe 1 - flexible semi-rigid duct 2 - worm gear clamps Semi-rigid flexible duct will not collapse, sag or kink Preferred hood opening allows for maximum airflow from the dryer to the outside kit can be used to vent 4 bathroom fans 5 (800) 645-2860
flexible laminated duct vent kits 211L 4 x 5 Lint Trap Vent Kit pack qty: 6 package: polybag & display tray For use wherever outside venting is not practical 1 - lint trap w/ mounting bracket 1 - laminated duct 2 - galvanized tension clamps Note: For use with electric dryers only CALIDAD DESDE 1967 QUALITY SINCE 1967 Q U A L I T E D E P U I S 1 9 6 7 281 4 x 8 Aluminum Preferred Hood Vent Kit item kit size qty package 280 4 x 5 1 retail box 1 - preferred hood vent w/ tail pipe 1 - UL listed laminated transition duct 2 - galvanized tension clamps kit can be used to vent 4 bathroom fans Preferred hood opening allows for maximum airflow from the dryer Kits Include Laminated Transition Duct 407W 4 x 8 Louvered Vent Kit 0 1 - louvered vent w/ tail pipe 1 - laminated duct 2 - adjustable nylon clamps Louvers prevent outside elements from entering the vent 406B 4 x 5 brown 10 retail box 406W 4 x 5 white 10 retail box 407B 4 x 8 brown 10 retail box kit can be used to vent 4 bathroom fans Dryer Venting Safety The U.S. Fire Administration reports that approximately 15,600 clothes dryers catch fire every year, injuring 300 people and killing 15. Seventy percent of those fires are linked to blocked vents. A blocked exhaust vent can also allow deadly carbon monoxide to enter your home. Clean the lint trap before and after drying each load of clothes. Don t forget to clean the back of the dryer where lint can be trapped. The interior of the dryer and venting system should be cleaned periodically by qualified service personnel. If you notice the drying time is longer, clean the vent system thoroughly to ensure proper airflow. Do not dry clothing/fabric on which there is anything flammable (alcohol, cooking oils, gasoline, spot removers, dry-cleaning solvents, etc.). Flammable substances give off vapors that could ignite or explode. Please read and follow all manufacturers warnings and instructions supplied with your clothes dryer. Verify and comply with local building codes. www.lambro.net 6
Sheet Rock Dryer accessories Lambro manufactures many diiferent clothes dryer venting accessories. If you have minimal space between the back of the clothes dryer and wall then we have your solution. Try our Tite-Fit or Dryer Wall Box products which allow for tight space clothes dryer installations such as laundry closets. Our high quality galvanized worm gear clamps get the job done without binding when tightening. Other accessories include smooth interior surface dryer elbows, heat saving inline dampers and a inline damper to prevent hot or cold air from entering the duct. (#3006 Packaging) tite-fit dryer venting solutions 3006 4 90 Degree Aluminum Dryer Duct ( Extends 24" to 41 ) item length qty package 3005 18 to 30 1 retail box 1-90 degree dryer duct Solves tight space venting problems Rectangular duct is 2 x 6 As close as 3 between wall and dryer tit-fit extension: item length qty package 3007 18 5 bulk pack 3008 4 Straight Aluminum Dryer Duct ( Extends 24" to 41 ) tit-fit extension: item length qty package 3007 18 5 bulk pack 1 - straight dryer duct 90 degree to straight Rectangular duct is 2 x 6 Solves tight space venting problems As close as 3 between wall and dryer 1790 12 x 20 Dryer Wall Box pack qty: 4 package: retail label & display tray Stud WALL UNIT 4 Oval Vent COVER PLATE Gas 1 - wall unit 1 - wall trim plate 4 PIPE Prevents duct from being crushed Flame resistant material Fits between studs Space saver WALL UNIT Note: Use our #229 4 Aluminum Snap-Lock Pipe to Pass-Through Box 7 (800) 645-2860
clamps for flexible, semi-rigid & rigid ducts 2841 4 Galvanized Worm Gear Clamps pack qty: 24 package: polybag & display tray 2 - worm gear clamps per polybag For use with rigid, semi-rigid and flexible duct 283 3 50 bulk pack 2830 3 500 bulk pack 284L 4 50 display tray 2840 4 500 bulk pack 380 5 12 bulk pack 381 6 12 bulk pack 382 7 12 bulk pack 383 8 12 bulk pack CALIDAD DESDE 1967 QUALITY SINCE 1967 Q U A L I T E D E P U I S 1 9 6 7 2541L 4 Galvanized Tension Clamps pack qty: 50 package: polybag & display tray 2 - tension clamps per polybag other packaging available: item qty package 254 50 display tray 2540 500 bulk pack For use with flexible duct flexible duct accessories 1775L 4 Draft Blocker Kit 0 & display tray 1 - draft blocker 2 - adjustable nylon clamps Stops outside cold air from entering the dryer vent 1700 4 Heat Economizer Heating Kit 2 1 - heat economizer w/ mounting bracket 1 - handle w/ screw 1 - nylon filter 2 - adjustable nylon clamps Turns your electric dryer into an extra heat source Note: For use with electric dryers only 3003L 4 Quick Fit Elbow Kit pack qty: 6 & display tray 1 - elbow A 1 - worm gear clamp No clamp needed, rubber gasket secures elbow to dryer exhaust outlet Smooth interior surface www.lambro.net 8
Dryer (#498PL Packaging) PREFERRED ducts used to properly vent clothes dryers transition ducts Clothes dryer transition ducts are used to connect the clothes dryer to the exhaust vent. The duct is limited to single lengths not to exceed 8 feet and are labeled for this application. Transition ducts should not be concealed within construction. Transition ducts are currently listed to comply with UL 2158A. ducts below can be used to vent 4 bathroom fans flexible laminated transition ducts - ul listed 498PL 4 x 8 Transition Duct pack qty: 24 package: polybag & display tray 1 - UL listed laminated transition duct 498CTC 4 x 8 Transition Duct with Clamps 2 1 - UL listed laminated transition duct 2 - tension clamps 495 4 x 5 12 bulk pack 495C 4 x 5 12 retail box 495P 4 x 5 12 polybag 498 4 x 8 12 bulk pack 498C 4 x 8 12 retail box 495PTC 4 x 5 12 polybag 495CTC 4 x 5 12 retail box 498PTC 4 x 8 12 polybag Note: Other sizes of UL & Non UL laminated ducts available Refer to our website flexible semi-rigid transition ducts - ul listed 302UL 4 x 8 Transition Duct pack qty: 9 1 - UL listed semi-rigid transition duct Triple lock design for an airtight seal Flame resistant & durable 3120UL 4 x 8 Transition Duct with Clamps pack qty: 9 package: polybag Note: Other sizes Non UL semi-rigid ducts available 1 - UL listed semi-rigid transition duct 2 - worm gear clamps Triple lock design for an airtight seal Flame resistant & durable 9 (800) 645-2860
(#267WS) (#344S) (#224WS) Items Above are Sleeved Packaged vents Lambro manufactures a line of wall vents available in aluminum or plastic material. Styles range from louvered for a low profile look to a preferred hood which allows for maximum airflow from the clothes dryer. Products containing a removable screen should always be cleaned to prevent blockage. 3 or 4 vents can be used to vent bathroom fans CALIDAD DESDE 1967 QUALITY SINCE 1967 Q U A L I T E D E P U I S 1 9 6 7 replacement wall vents 2676W 4 Plastic Louvered Vent 2 package: polybag & display tray 1 - louvered vent 1471W 4 Plastic Preferred Hood Vent 2 1 - preferred hood vent 1 - removable screen 1475B 3 brown 12 bulk pack 1475W 3 white 12 bulk pack 1423B 4 brown 12 bulk pack 1423W 4 white 12 bulk pack 2677B 4 brown 12 polybag 1470B 3 brown 12 bulk pack 1470W 3 white 12 bulk pack 1471B 4 brown 12 bulk pack 210W 4 white 12 polybag Note: 210W comes with 3 tail pipe wall vents 267W 4 Plastic Louvered Vent 2 1 - louvered vent w/ tail pipe 290B 3 brown 12 bulk pack 290W 3 white 12 bulk pack 267B 4 brown 12 bulk pack 267BS 4 brown 12 retail sleeve 267WS 4 white 10 retail sleeve 267WP 4 white 12 polybag 224W 4 Plastic Preferred Hood Vent 2 1 - preferred hood vent w/ tail pipe 1 - removable screen 222B 3 brown 12 bulk pack 222W 3 white 12 bulk pack 224B 4 brown 12 bulk pack 224BS 4 brown 12 retail sleeve 224WS 4 white 10 retail sleeve 224WP 4 white 12 polybag www.lambro.net 10
11Dryer wall vents 344 4 Aluminum Preferred Hood Vent (4 ½ opening) 0 1 - preferred hood vent w/ tail pipe 544 4 Aluminum Preferred Hood Vent (2 ½ opening) 2 1 - preferred hood vent w/ tail pipe 289W 4 Dryer Vent Seal Vent keeps out unwanted elements Keeps hot or cold air out Floating damper stays closed when dryers not in use 1472W 4 Premium Hood Vent pack qty: 4 package: retail sleeve & display tray Removable screen Low profile design universal vent guard 1491WG Universal Hinged Vent Guard 2 package: retail label Installs over our 3 or 4 wall vents Hinged access guard for easy cleaning (800) 645-2860 343 3 10 bulk pack 343S 3 10 retail sleeve 344S 4 10 retail sleeve 3 or 4 vents can be used to vent bathroom fans 543 3 12 bulk pack 3 or 4 vents can be used to vent bathroom fans 1 - dryer vent seal 1 - premium hood vent w/ tail pipe 1 - removable screen vent can be used to vent 4 bathroom fans 1 - universal hinged vent guard Note: This guard will not fit over vents: 289W & 1472W
(#2310 Packaging) pipes & elbows Lambro manufactures a full line of aluminum and galvanized snap-lock pipes and adjustable 90 degree elbows. Snap-lock pipes are available in 24 or 60 lengths that can easily be trimmed to size. Our adjustable 90 degree elbows adjust to fit most applications while being used in conjunction with our snap-lock pipes. 3 or 4 can be used to vent bathroom fans CALIDAD DESDE 1967 QUALITY SINCE 1967 Q U A L I T E D E P U I S 1 9 6 7 aluminum & galvanized pipes 229 4 Aluminum Snap-Lock Pipe (24 length) pack qty: 25 1 - aluminum snap-lock pipe 702 4 Galvanized Snap-Lock Pipe (24 length - 30 Gauge) pack qty: 25 1 - galvanized snap-lock pipe item size length qty package 228 3 24 25 bulk pack 423 6 24 25 bulk pack 424 7 24 25 bulk pack 425 8 24 10 bulk pack 427 4 60 10 bulk pack item size length qty package gauge 701 3 24 25 bulk pack 30 704 6 24 10 bulk pack 30 706 8 24 10 bulk pack 30 747 4 60 10 bulk pack 30 749 6 60 10 bulk pack 30 aluminum & galvanized elbows 2310 4 Aluminum Adjustable Elbow (90 Degree) 2 package: display tray 722 4 Galvanized Adjustable Elbow (90 Degree - 28 Gauge) 2 22.5 45 90 22.5 45 90 1 - aluminum adjustable elbow 1 - galvanized adjustable elbow 2300 3 12 display tray 432 5 12 bulk pack 433 6 12 bulk pack 434 7 12 bulk pack 435 8 12 bulk pack gauge 721 3 12 bulk pack 28 723 5 12 bulk pack 28 724 6 12 bulk pack 28 725 7 12 bulk pack 28 726 8 12 bulk pack 28 www.lambro.net 12
13Bathroom (#480L Packaging) flexible laminated duct vent kits 480L 4 x 5 Wall Vent Kit Louvers prevent outside elements from entering the vent For use with 3 or 4 bathroom fan exhaust outlets 402L 4 x8 Roof Vent Kit (black) Damper & screen keeps unwanted elements outside For use with 3 or 4 bathroom fan exhaust outlets 407W 4 x 8 Louvered Vent Kit 0 Louvers prevent outside elements from entering the vent 1 - louvered vent w/ tail pipe 1 - laminated duct 2 - adjustable nylon clamps STANDARD ducts have greater installation flexibility COMPLETE KITS Vent your bathroom fan using our laminated duct installation kits. Laminated ducts are flame resistant, and can be used in applications where semi-rigid and rigid duct will not work. We offer two types of installation kits; a roof kit and a wall kit to meet your requirements. Our kits include all components needed to properly vent from the bathroom fan exhaust to the outside. Kits can also be used for general air distribution. (800) 645-2860 1 - louvered vent w/ 3 tail pipe 1 - laminated duct 1-3 - 4 adaptor 2 - adjustable nylon clamps 1 - roof vent 1 - laminated duct 1-3 - 4 adaptor 2 - adjustable nylon clamps 406B 4 x 5 brown 10 retail box 406W 4 x 5 white 10 retail box 407B 4 x 8 brown 10 retail box
PREFERRED ducts withstand higher temperatures COMPLETE KITS Vent your bathroom fan using our aluminum semi-rigid duct installation kits. Aluminum semi-rigid ducts are flame resistant, and can withstand higher heat tolerance than laminated ducts. Semi-rigid ducts are more durable while still offering flexibility. Our kits include all components needed to properly vent from the bathroom fan exhaust to the outside. Kits can also be used for general air distribution. CALIDAD DESDE 1967 QUALITY SINCE 1967 Q U A L I T E D E P U I S 1 9 6 7 kits below can be used to vent 4 clothes dryers flexible aluminum semi-rigid duct vent kits 313W 4 x 8 Louvered Vent Kit 1 - louvered vent w/ tail pipe 1 - aluminum semi-rigid duct 2 - worm gear clamps item kit size color qty package 312B 4 x 5 brown 1 single pack 312W 4 x 5 white 1 single pack 313B 4 x 8 brown 1 single pack Louvers prevent outside elements from entering the vent 316W 4 x 8 Preferred Hood Kit 1 - preferred hood w/ tail pipe 1 - aluminum semi-rigid duct 2 - worm gear clamps item kit size color qty package 315B 4 x 5 brown 1 single pack 315W 4 x 5 white 1 single pack 316B 4 x 8 brown 1 single pack Preferred hood opening allows for maximum airflow from the dryer while a removable screen keeps outside elements from entering the vent www.lambro.net 14
15Bathroom duct connectors 235 3" - 4" or 4" - 3" Black Plastic Adaptor 2 package: display tray 250 3" - 4" Aluminum Increaser 2 package: display tray Adapts from 3-4 1 - aluminum increaser 320L 4" Universal Duct Extension Kit 2 package: polybag & display tray accessories 2841 4 Galvanized Worm Gear Clamps pack qty: 24 package: polybag & display tray 2 - worm gear clamps per polybag Lambro manufactures bathroom fan venting accessories which can also be used in general air distribution. Our high quality galvanized worm gear clamps get the job done without binding when tightening. Other accessories include increasers and reducers as well as connectors for ducts. clamps for flexible, semi-rigid & rigid ducts For use with rigid, semi-rigid and flexible duct 2541L 4 Galvanized Tension Clamps pack qty: 50 package: polybag & display tray 2 - tension clamps per polybag For use with flexible duct (#250 & 235 Packaging) (800) 645-2860 aluminum reducer available: item adapts qty package 251 4-3 12 display tray Connects two lengths of flexible duct 1 - connector 2 - worm gear clamps 283 3 50 bulk pack 2830 3 500 bulk pack 284L 4 50 display tray 2840 4 500 bulk pack 380 5 12 bulk pack 381 6 12 bulk pack other packaging available: item qty package 254 50 display tray 2540 500 bulk pack Adapts exhaust outlet to either 3 or 4 duct size 1 - plastic adaptor
(#302L Packaging) 414 4 x 25 LamaFlex Duct flexible ducts Lambro manufactures a variety of flexible laminated and aluminum semi-rigid ducts in many different diameters and lengths. Laminated ducts are available in UL Listed and non UL Listed depending on the application and building code requirements. Aluminum semi-rigid ducts can withstand a higher heat tolerance than laminated. 400 series laminated ducts - aluminum / polyester TM CALIDAD DESDE 1967 411 4 x 5 12 retail box 417** 4 x 5 12 retail box 412 4 x 8 12 retail box 418** 4 x 8 12 retail box 413 3 x 25 1 single pack 416 6 x 25 1 single pack Note: Other sizes available ** Nylon Clamps Refer to our website QUALITY SINCE 1967 Q U A L I T E D E P U I S 1 9 6 7 414UL 4 x 25 LamaFlex Duct 413UL 3 x 25 1 single pack 416UL 6 x 25 1 single pack 500 series air connectors - metalized / polyester 514 4 x 25 UL 181 Class 1 Air Connector 513 3 x 25 1 single pack 516 6 x 25 1 single pack 600 series air connectors - aluminum / polyester / metalized 614 4 x 25 Air Connector 614UL 4 x 25 UL 181 Class 1 Air Connector 613 3 x 25 1 single pack 616 6 x 25 1 single pack 613UL 3 x 25 1 single pack 616UL 6 x 25 1 single pack www.lambro.net 16
Bathroom flexible aluminum semi-rigid ducts 302L 4 x 8 Semi-Rigid Duct pack qty: 9 package: display tray 1 - aluminum semi-rigid duct Semi-rigid duct will not collapse, sag or kink Flame resistant & durable 301 3 x 8 14 bulk pack 3112 3 x 8 8 polybag 333 3 x 25 10 bulk pack 3122 4 x 8 8 polybag 334 4 x 25 6 bulk pack 304 5 x 8 5 bulk pack 306 6 x 8 3 bulk pack 336 6 x 25 2 bulk pack 308 7 x 8 5 bulk pack 310 8 x 8 4 bulk pack 317 10 x 8 2 bulk pack 3120L 4 x 8 Semi-Rigid Duct with Clamps pack qty: 9 package: polybag & display tray 3110 3 x 8 8 polybag 1 - aluminum semi-rigid duct 2 - worm gear clamps flexible white vinyl ducts - NOT RECOMMENDED FOR HIGH TEMPERATURE VENTING 1309 4 x 8 Vinyl Duct 2 package: polybag 1 - vinyl duct General air distribution Do not use vinyl duct for clothes dryer venting 1303 4 x 8 Vinyl Duct with Clamps 2 package: polybag 213 3 x 8 24 bulk pack 1317 3 x 8 12 polybag 214 3 x 20 1 single pack 215L 3 x 50 1 retail box 1310 4 x 5 12 polybag 217 4 x 8 24 bulk pack 218 4 x 20 1 single pack 2180 4 x 20 5 polybag 219L 4 x 50 1 retail box 1321 3 x 8 12 polybag 1307 4 x 5 12 polybag 1 - vinyl duct 2 - adjustable nylon clamps 17 (800) 645-2860
(#354R Packaging) vents Lambro manufactures wall and roof vents available in aluminum and plastic. Styles range from louvered vent for a low profile look to a preferred vent allowing maximum airflow. The air intakes are available with a louvered vent and have a metal screen in the vent to keep unwanted elements outside. 4 vents below can be used to vent clothes dryers CALIDAD DESDE 1967 QUALITY SINCE 1967 Q U A L I T E D E P U I S 1 9 6 7 replacement wall vents 2676W 4 Plastic Louvered Vent 2 package: polybag & display tray 1 - louvered vent 1471W 4 Plastic Preferred Hood Vent 2 1 - preferred hood vent 1 - removable screen 1475B 3 brown 12 bulk pack 1475W 3 white 12 bulk pack 1423B 4 brown 12 bulk pack 1423W 4 white 12 bulk pack 2677B 4 brown 12 polybag 1470B 3 brown 12 bulk pack 1470W 3 white 12 bulk pack 1471B 4 brown 12 bulk pack 210W 4 white 12 polybag Note: 210W comes with 3 tail pipe wall vents 267W 4 Plastic Louvered Vent 2 1 - louvered vent w/ tail pipe 224W 4 Plastic Preferred Hood Vent 2 1 - preferred hood vent w/ tail pipe 1 - removable screen 290B 3 brown 12 bulk pack 290W 3 white 12 bulk pack 267B 4 brown 12 bulk pack 267BS 4 brown 12 retail sleeve 267WS 4 white 10 retail sleeve 267WP 4 white 12 polybag 222B 3 brown 12 bulk pack 222W 3 white 12 bulk pack 224B 4 brown 12 bulk pack 224BS 4 brown 12 retail sleeve 224WS 4 white 10 retail sleeve 224WP 4 white 12 polybag www.lambro.net 18
19Bathroom wall vents 344 4 Aluminum Preferred Hood Vent (4 ½ opening) 0 1 - preferred hood vent w/ tail pipe 544 4 Aluminum Preferred Hood Vent (2 ½ opening) 2 1 - preferred hood vent w/ tail pipe 604W 4 Louvered Air Intake Vent pack qty: 8 package: display tray 1 - louvered air intake vent Metal screen prevents outside elements from entering the vent 1472W 4 Premium Hood Vent pack qty: 4 package: retail sleeve & display tray Removable screen Low profile design universal vent guard 1491WG Universal Hinged Vent Guard 2 package: retail label Installs over our 3 or 4 wall vents Hinged access guard for easy cleaning (800) 645-2860 343 3 10 bulk pack 343S 3 10 retail sleeve 344S 4 10 retail sleeve 4 vent can be used to vent clothes dryers 543 3 12 bulk pack 4 vent can be used to vent clothes dryers 603B 3 brown 6 bulk pack 603W 3 white 6 bulk pack 604B 4 brown 8 display tray Note: Available with 3 tail pipe Refer to our website 1 - premium hood vent w/ tail pipe 1 - removable screen 4 vent can be used to vent clothes dryers 1 - universal hinged vent guard Note: This guard will not fit over vent: 1472W
roof vents 109R 4 Aluminum Roof Cap Damper & screen prevents outside elements from entering the vent 354R 3 & 4 Plastic Roof Cap (black) 130 3 1 single pack 1 - roof cap 3540 3 & 4 10 bulk pack CALIDAD DESDE 1967 QUALITY SINCE 1967 Q U A L I T E D E P U I S 1 9 6 7 Damper & screen prevents outside elements from entering the vent Includes collars to adapt to 3" or 4" exhaust ducts 1 - roof cap 1-3 collar 1-4 collar under eave / soffit vents 143W 4 Plastic Under Eave Vent 2 1 - under eave vent Damper prevents outside elements from entering the vent 153B 3 brown 12 bulk pack 153W 3 white 12 bulk pack 143B 4 brown 12 bulk pack 4 vent can be used to vent clothes dryers 155W 4 Plastic Under Eave Vent pack qty: 8 154W 3 8 bulk pack Flush mounts 1 - under eave vent 164W 4 Plastic Double Sided Under Eave Vent pack qty: 8 Adapts to 4" or 6" exhaust ducts Removable screens 1 - double sided under eave vent 2 - removable screens 1-6 to 4 transition collar 4 vent can be used to vent clothes dryers (SCREENS MUST BE REMOVED) www.lambro.net 20
21Bathroom aluminum & galvanized pipes 229 4 Aluminum Snap-Lock Pipe (24 length) pack qty: 25 1 - aluminum snap-lock pipe 702 4 Galvanized Snap-Lock Pipe (24 length - 30 Gauge) pack qty: 25 1 - galvanized snap-lock pipe aluminum & galvanized elbows 2310 4 Aluminum Adjustable Elbow (90 Degree) 2 package: display tray 722 4 Galvanized Adjustable Elbow (90 Degree - 28 Gauge) 2 (#2300 Packaging) 22.5 45 90 22.5 45 90 pipes & elbows Lambro manufactures a full line of aluminum and galvanized snap-lock pipes and adjustable 90 degree elbows. Snap-lock pipes are available in 24 or 60 lengths that can easily be trimmed to size. Our adjustable 90 degree elbows adjust to fit most applications while being used in conjunction with our snap-lock pipes. 3 or 4 can be used to vent bathroom fans 1 - aluminum adjustable elbow 1 - galvanized adjustable elbow (800) 645-2860 item size length qty package 228 3 24 25 bulk pack 423 6 24 25 bulk pack 424 7 24 25 bulk pack 425 8 24 10 bulk pack 427 4 60 10 bulk pack item size length qty package gauge 701 3 24 25 bulk pack 30 704 6 24 10 bulk pack 30 706 8 24 10 bulk pack 30 747 4 60 10 bulk pack 30 749 6 60 10 bulk pack 30 2300 3 12 display tray 432 5 12 bulk pack 433 6 12 bulk pack 434 7 12 bulk pack 435 8 12 bulk pack gauge 721 3 12 bulk pack 28 723 5 12 bulk pack 28 724 6 12 bulk pack 28 725 7 12 bulk pack 28 726 8 12 bulk pack 28
range hood vent kits venting kits Lambro manufactures a complete wall and roof venting kit to properly vent a range hood or downdraft. Our kits include all components needed to vent from the appliance exhaust to the outside. Kits contain rigid ductwork which can safely be used in a high heat tolerance installation. 377 Wall Vent Kit (#378 Packaging) 1-7 plastic louvered wall vent 1-7 galvanized pipe - 12 length 1-7 galvanized adjustable elbow 1-3 ¼ x 10 galvanized transition 1 - roll of duct tape Kitchen Can be used to vent over-the-range microwaves Kit connects to 7 round or 3 ¼ x 10 exhaust outlets 378 Roof Vent Kit 1-7 plastic roof vent 5-7 galvanized pipe - 17 ½ length 1-7 galvanized adjustable elbow 1-3 ¼ x 10 galvanized transition 1 - roll of duct tape Can be used to vent over-the-range microwaves Kit connects to 7 round or 3 ¼ x 10 exhaust outlets accessories Our high quality galvanized worm gear clamps get the job done without binding when (#283) tightening. Clamps are offered from size 3 to 8 depending on your requirements. (#381) (#284L) clamps for flexible, semi-rigid & rigid ducts 381 6 Galvanized Worm Gear Clamp 2 1 - worm gear clamp For use with rigid, semi-rigid and flexible duct 283 3 50 bulk pack 2830 3 500 bulk pack 284L 4 50 display tray 2841 4 24 polybag 2840 4 500 bulk pack 380 5 12 bulk pack 382 7 12 bulk pack 383 8 12 bulk pack www.lambro.net 22
23 Kitchen ductwork Range hoods must be vented using metal ductwork. The minimum size duct allowed on most range hoods is 3 ¼" by 10" which is equivalent to a 6" round. Lambro manufactures aluminum and galvanized ductwork for range hood and downdraft venting applications. Verify and comply with local building codes. (#1020L Packaging) 90 Degree & Straight ductwork 102 3 ¼ x 10 Aluminum Elbow (90 Degree) pack qty: 6 For use with rigid ductwork 1 - aluminum elbow 1020L 3 ¼ x 10 Galvanized Elbow (90 Degree) pack qty: 4 package: display tray For use with rigid ductwork 1 - galvanized elbow 101L 3 ¼ x 10 Aluminum Duct (24 length) pack qty: 5 package: display tray For use with rigid ductwork 1 - aluminum duct 126L 3 ¼ x 10 Galvanized Duct (24 length) pack qty: 5 package: display tray For use with rigid ductwork 1 - galvanized duct transitions 122 3 ¼ x 10 to 6 Aluminum Transition pack qty: 6 1 - aluminum transition For use with rigid ductwork 120 4 6 bulk pack 121 5 6 bulk pack 123 7 6 bulk pack 124 8 6 bulk pack 137 3 ¼ x 10 to 6 Galvanized Transition pack qty: 6 1 - galvanized transition For use with rigid ductwork 135 4 6 bulk pack 136 5 6 bulk pack 138 7 6 bulk pack 139 8 6 bulk pack (800) 645-2860
wall vents 117GR 3 ¼ x 10 Plastic Vent (gray) 1 - plastic vent (#106R Packaging) Spring controlled damper vents The minimum size duct allowed on most range hoods is 3 ¼" by 10" which is equivalent to a 6" round. Lambro manufactures a full line of aluminum and plastic wall and roof vents used for venting kitchen range hoods and downdrafts. Please follow appliance manufacturers recommendation for venting requirements. other colors available: 117B 3 ¼ x 10 brown 1 single pack 1170B 3 ¼ x 10 brown 6 bulk pack 1170G 3 ¼ x 10 gray 6 bulk pack 117W 3 ¼ x 10 white 1 single pack 1170W 3 ¼ x 10 white 6 bulk pack CALIDAD DESDE 1967 QUALITY SINCE 1967 Q U A L I T E D E P U I S 1 9 6 7 106R 3 ¼ x 10 Aluminum Vent 1 - aluminum vent other variations available: 1060 3 ¼ x 10 6 bulk pack 106S 3 ¼ x 10 1 single pack Note: 106S with screen Spring controlled damper 351GR 6 Plastic Vent (gray) 1 - plastic vent Spring controlled damper Removable screen 346 6 Aluminum Vent 1 - aluminum vent 350G 5 gray 1 single pack 350W 5 white 1 single pack 3510G 6 gray 18 bulk pack 351W 6 white 1 single pack 3510W 6 white 18 bulk pack 352G 7 gray 1 single pack 352W 7 white 1 single pack 389G 8 gray 1 single pack 389W 8 white 1 single pack 345 5 1 single pack 3450 5 6 bulk pack 3460 6 6 bulk pack 347 7 1 single pack 3470 7 6 bulk pack 348 8 1 single pack 3480 8 6 bulk pack Spring controlled damper www.lambro.net 24
Kitchen wall vents 346S 6 Aluminum Vent with Screen 1 - aluminum vent Spring controlled damper 361W 6 Plastic Louvered Vent 2 1 - louvered vent Louvers prevent outside elements from entering 345S 5 1 single pack 347S 7 1 single pack 348S 8 1 single pack 360W 5 white 12 bulk pack 361B 6 brown 12 bulk pack 362W 7 white 12 bulk pack 363W 8 white 12 bulk pack 361WTP 6 Plastic Louvered Vent pack qty: 5 Louvers prevent outside elements from entering 1 - louvered vent w/ 12 tail pipe roof vents 356 6 Plastic Roof Cap (black) 1 - roof vent Damper & screen 107 Aluminum Roof Vent 355 5 1 single pack 357 7 1 single pack 358 8 1 single pack 359 10 1 single pack 1 - roof vent Fits ducts up to 10" round & 3 ¼" x 10" ducts Damper & screen 116 Aluminum Roof Vent 1 - roof vent Fits up to 7" round ducts Damper & screen 25 (800) 645-2860
(#704) (#724) pipes & elbows Lambro manufactures a full line of aluminum and galvanized snap-lock pipes and adjustable 90 degree elbows. Snap-lock pipes are available in 24 or 60 lengths that can easily be trimmed to size. Our adjustable 90 degree elbows adjust to fit most applications while being used in conjunction with our snap-lock pipes. 3 or 4 can be used to vent bathroom fans 4 can be used to vent clothes dryers CALIDAD DESDE 1967 QUALITY SINCE 1967 Q U A L I T E D E P U I S 1 9 6 7 aluminum & galvanized pipes 423 6 Aluminum Snap-Lock Pipe (24 length) pack qty: 25 1 - aluminum snap-lock pipe 704 6 Galvanized Snap-Lock Pipe (24 length - 30 Gauge) 0 1 - galvanized snap-lock pipe item size length qty package 228 3 24 25 bulk pack 229 4 24 25 bulk pack 424 7 24 25 bulk pack 425 8 24 10 bulk pack 427 4 60 10 bulk pack item size length qty package gauge 701 3 24 25 bulk pack 30 702 4 24 25 bulk pack 30 706 8 24 10 bulk pack 30 747 4 60 10 bulk pack 30 749 6 60 10 bulk pack 30 aluminum & galvanized elbows 433 6 Aluminum Adjustable Elbow (90 Degree) 2 724 6 Galvanized Adjustable Elbow (90 Degree - 28 Gauge) 2 22.5 45 90 22.5 45 90 1 - aluminum adjustable elbow 1 - galvanized adjustable elbow 2300 3 12 display tray 2310 4 12 display tray 432 5 12 bulk pack 434 7 12 bulk pack 435 8 12 bulk pack gauge 721 3 12 bulk pack 28 722 4 12 bulk pack 28 723 5 12 bulk pack 28 725 7 12 bulk pack 28 726 8 12 bulk pack 28 www.lambro.net 26
27 hvac (#3120L) flexible ducts Lambro manufactures a variety of flexible laminated, aluminum semi-rigid and vinyl ducts in many different diameters and lengths. Laminated ducts are available in UL Listed and non UL Listed depending on the application and building code requirements. Aluminum semirigid ducts can withstand a higher heat tolerance than laminated. Vinyl should never be used 400 series laminated ducts - aluminum / polyester 416 6 x 25 LamaFlex Duct 416UL 4 x 25 LamaFlex Duct 411 4 x 5 12 retail box 417** 4 x 5 12 retail box 412 4 x 8 12 retail box 418** 4 x 8 12 retail box 413 3 x 25 1 single pack 414 4 x 25 1 retail box Note: Other sizes available ** Nylon Clamps Refer to our website 413UL 3 x 25 1 single pack 414UL 4 x 25 1 single pack 500 series air connectors - metalized / polyester 516 6 x 25 UL 181 Class 1 Air Connector 513 3 x 25 1 single pack 514 4 x 25 1 single pack 600 series air connectors - aluminum / polyester / metalized 616 6 x 25 Air Connector 616UL 6 x 25 UL 181 Class 1 Air Connector 613 3 x 25 1 single pack 614 4 x 25 1 single pack 613UL 3 x 25 1 single pack 614UL 4 x 25 1 single pack TM in an application associated with heat. (800) 645-2860
flexible aluminum semi-rigid ducts 302L 4 x 8 Semi-Rigid Duct pack qty: 9 package: display tray 1 - aluminum semi-rigid duct Semi-rigid duct will not collapse, sag or kink Flame resistant & durable 301 3 x 8 14 bulk pack 3112 3 x 8 8 polybag 333 3 x 25 10 bulk pack 3122 4 x 8 8 polybag 334 4 x 25 6 bulk pack 304 5 x 8 5 bulk pack 306 6 x 8 3 bulk pack 336 6 x 25 2 bulk pack 308 7 x 8 5 bulk pack 310 8 x 8 4 bulk pack 317 10 x 8 2 bulk pack CALIDAD DESDE 1967 QUALITY SINCE 1967 Q U A L I T E D E P U I S 1 9 6 7 3120L 4 x 8 Semi-Rigid Duct with Clamps pack qty: 9 package: polybag & display tray 3110 3 x 8 8 polybag 1 - aluminum semi-rigid duct 2 - worm gear clamps 296 6 x 8 Semi-Rigid Duct with One End Crimped pack qty: 3 1 - aluminum semi-rigid duct w/ crimped end 3060 6 x 8 Semi-Rigid Duct with Connecting Ends pack qty: 6 1 - aluminum semi-rigid duct w/ ends item size qty package 293 3 x 8 14 bulk pack 294 4 x 8 8 bulk pack 295 5 x 8 5 bulk pack item size qty package 3010 3 x 8 20 bulk pack 3020 4 x 8 12 bulk pack flexible insulated ducts 2576 6 x 25 Insulated Duct 1 - insulated duct 2574 4 x 25 1 retail box 2578 8 x 25 1 retail box 2582 12 x 25 1 retail box Reduces heat, keeps cool air within duct Prevents condensation within duct www.lambro.net 28
29 hvac flexible white vinyl ducts 2218 6 x 50 Vinyl Duct 1 - vinyl duct General air distribution Do not use vinyl duct for clothes dryer venting 213 3 x 8 24 bulk pack 1317 3 x 8 12 polybag 214 3 x 20 1 single pack 215L 3 x 50 1 retail box 1310 4 x 5 12 polybag 217 4 x 8 24 bulk pack 218 4 x 20 1 single pack 2180 4 x 20 5 polybag 219L 4 x 50 1 retail box (#381) (#284L) Our high quality galvanized worm gear clamps get the job done without binding when (#283) tightening. Clamps and connectors are offered from size 3 to 8 depending on your clamps for flexible, semi-rigid & rigid ducts 381 6 Galvanized Worm Gear Clamp 2 1 - worm gear clamp For use with rigid, semi-rigid and flexible duct 283 3 50 bulk pack 2830 3 500 bulk pack 284L 4 50 display tray 2841 4 24 polybag 2840 4 500 bulk pack 380 5 12 bulk pack 382 7 12 bulk pack 383 8 12 bulk pack connectors for flexible ducts 246 6 Galvanized Connector pack qty: 6 For use with rigid, semi-rigid and flexible duct 243 3 6 bulk pack 244G 4 6 bulk pack 245 5 6 bulk pack 247 7 6 bulk pack 248 8 6 bulk pack Note: 4 Aluminum connector available - No. 244 accessories requirements. (800) 645-2860
(#126L) (#1020L) ductwork Lambro manufactures aluminum and galvanized ductwork which is available in 3 ¼ x 10 or round diameters depending on the application. Products consist of transitions, 90 degree and straight rigid ductwork which can be used in HVAC forced air system venting installations. CALIDAD DESDE 1967 QUALITY SINCE 1967 Q U A L I T E D E P U I S 1 9 6 7 90 Degree & Straight ductwork 102 3 ¼ x 10 Aluminum Elbow (90 Degree) pack qty: 6 For use with rigid ductwork 1 - aluminum elbow 1020L 3 ¼ x 10 Galvanized Elbow (90 Degree) pack qty: 4 package: display tray For use with rigid ductwork 1 - galvanized elbow 101L 3 ¼ x 10 Aluminum Duct (24 length) pack qty: 5 package: display tray For use with rigid ductwork 1 - aluminum duct 126L 3 ¼ x 10 Galvanized Duct (24 length) pack qty: 5 package: display tray For use with rigid ductwork 1 - galvanized duct transitions 122 3 ¼ x 10 to 6 Aluminum Transition pack qty: 6 1 - aluminum transition For use with rigid ductwork 120 4 6 bulk pack 121 5 6 bulk pack 123 7 6 bulk pack 124 8 6 bulk pack 137 3 ¼ x 10 to 6 Galvanized Transition pack qty: 6 1 - galvanized transition For use with rigid ductwork 135 4 6 bulk pack 136 5 6 bulk pack 138 7 6 bulk pack 139 8 6 bulk pack www.lambro.net 30
31 hvac (#704) (#724) pipes & elbows Lambro manufactures a full line of aluminum and galvanized snap-lock pipes and adjustable 90 degree elbows. Snap-lock pipes are available in 24 or 60 lengths that can easily be trimmed to size. Our adjustable 90 degree elbows adjust to fit most applications while being used in conjunction with our snap-lock 4 can be used to vent clothes dryers 3 or 4 can be used to vent bathroom fans aluminum & galvanized pipes 423 6 Aluminum Snap-Lock Pipe (24 length) pack qty: 25 1 - aluminum snap-lock pipe 704 6 Galvanized Snap-Lock Pipe (24 length - 30 Gauge) 0 1 - galvanized snap-lock pipe item size length qty package 228 3 24 25 bulk pack 229 4 24 25 bulk pack 424 7 24 25 bulk pack 425 8 24 10 bulk pack 427 4 60 10 bulk pack item size length qty package gauge 701 3 24 25 bulk pack 30 702 4 24 25 bulk pack 30 706 8 24 10 bulk pack 30 747 4 60 10 bulk pack 30 749 6 60 10 bulk pack 30 aluminum & galvanized elbows 433 6 Aluminum Adjustable Elbow (90 Degree) 2 package: display tray 724 6 Galvanized Adjustable Elbow (90 Degree - 28 Gauge) 2 22.5 45 90 22.5 45 90 2300 3 12 display tray 2310 4 12 display tray 432 5 12 bulk pack 434 7 12 bulk pack 435 8 12 bulk pack gauge 721 3 12 bulk pack 28 722 4 12 bulk pack 28 723 5 12 bulk pack 28 725 7 12 bulk pack 28 726 8 12 bulk pack 28 pipes. 1 - aluminum adjustable elbow 1 - galvanized adjustable elbow (800) 645-2860
(#606WTP) wall vents (#361WTP) vents Lambro manufactures a line of wall and roof vents available in aluminum or plastic material. Wall vent styles range from louvered or fixed air intake for a low profile look to a preferred hood which allows for maximum airflow. Our roof vents allow for an alternative venting solution when a wall vent will not work. We carry vents for all types of venting installation needs. CALIDAD DESDE 1967 QUALITY SINCE 1967 Q U A L I T E D E P U I S 1 9 6 7 117GR 3 ¼ x 10 Plastic Vent (gray) 1 - plastic vent Spring controlled damper 106R 3 ¼ x 10 Aluminum Vent 1 - aluminum vent other colors available: 117B 3 ¼ x 10 brown 1 single pack 1170B 3 ¼ x 10 brown 6 bulk pack 1170G 3 ¼ x 10 gray 6 bulk pack 117W 3 ¼ x 10 white 1 single pack 1170W 3 ¼ x 10 white 6 bulk pack other variations available: 1060 3 ¼ x 10 6 bulk pack 106S 3 ¼ x 10 1 single pack Note: 106S with screen Spring controlled damper 351GR 6 Plastic Vent (gray) 1 - plastic vent Spring controlled damper Removable screen 346 6 Aluminum Vent 1 - aluminum vent Spring controlled damper 350G 5 gray 1 single pack 350W 5 white 1 single pack 3510G 6 gray 18 bulk pack 351W 6 white 1 single pack 3510W 6 white 18 bulk pack 352G 7 gray 1 single pack 352W 7 white 1 single pack 389G 8 gray 1 single pack 389W 8 white 1 single pack 345 5 1 single pack 3450 5 6 bulk pack 3460 6 6 bulk pack 347 7 1 single pack 3470 7 6 bulk pack 348 8 1 single pack 3480 8 6 bulk pack www.lambro.net 32
hvac wall vents 346S 6 Aluminum Vent with Screen 1 - aluminum vent 345S 5 1 single pack 347S 7 1 single pack 348S 8 1 single pack Spring controlled damper 344 4 Aluminum Preferred Hood Vent (4 ½ opening) 0 1 - preferred hood vent w/ tail pipe All aluminum design 343 3 10 bulk pack 343S 3 10 retail sleeve 344S 4 10 retail sleeve 4 can be used to vent clothes dryers 3 or 4 can be used to vent bathroom fans 544 4 Aluminum Preferred Hood Vent (2 ½ opening) 2 1 - preferred hood vent w/ tail pipe Low profile design 604W 4 Plastic Louvered Air Intake Vent pack qty: 8 package: display tray 1 - air intake vent Metal screen prevents outside elements from entering the vent 606W 6 Plastic Louvered Air Intake Vent pack qty: 6 1 - air intake vent 606WTP 6 Plastic Louvered Air Intake Vent pack qty: 5 Plastic screen prevent outside elements from entering the vent 543 3 12 bulk pack 4 can be used to vent clothes dryers 3 or 4 can be used to vent bathroom fans 603B 3 brown 6 bulk pack 603W 3 white 6 bulk pack 604B 3 brown 8 display tray Note: Available with 3 tail pipe Refer to our website 605B 5 brown 6 bulk pack 605W 5 white 6 bulk pack 606B 6 brown 6 bulk pack 1 - air intake vent w/ 12 tail pipe 33 (800) 645-2860
wall vents 2676W 4 Plastic Louvered Vent 2 package: polybag & display tray 1 - louvered vent 1475B 3 brown 12 bulk pack 1475W 3 white 12 bulk pack 1423B 4 brown 12 bulk pack 1423W 4 white 12 bulk pack 2677B 4 brown 12 polybag CALIDAD DESDE 1967 QUALITY SINCE 1967 Q U A L I T E D E P U I S 1 9 6 7 267W 4 Plastic Louvered Vent 2 1 - louvered vent w/ tail pipe 290B 3 brown 12 bulk pack 290W 3 white 12 bulk pack 267B 4 brown 12 bulk pack 267BS 4 brown 12 retail sleeve 267WS 4 white 10 retail sleeve 267WP 4 white 12 polybag 361W 6 Plastic Louvered Vent 2 1 - louvered vent 361WTP 6 Plastic Louvered Vent pack qty: 5 360W 5 white 12 bulk pack 361B 6 brown 12 bulk pack 362W 7 white 12 bulk pack 363W 8 white 12 bulk pack 1 - louvered vent w/ 12 tail pipe 1471W 4 Plastic Preferred Hood Vent 2 1 - preferred hood vent 1 - removable screen 1470B 3 brown 12 bulk pack 1470W 3 white 12 bulk pack 1471B 4 brown 12 bulk pack 210W 4 white 12 polybag Note: 210W comes with 3 tail pipe 224W 4 Plastic Preferred Hood Vent 2 1 - preferred hood vent w/ tail pipe 1 - removable screen 222B 3 brown 12 bulk pack 222W 3 white 12 bulk pack 224B 4 brown 12 bulk pack 224BS 4 brown 12 retail sleeve 224WS 4 white 10 retail sleeve 224WP 4 white 12 polybag www.lambro.net 34
hvac roof vents 356 6 Plastic Roof Cap (black) 1 - roof vent Damper & screen 355 5 1 single pack 357 7 1 single pack 358 8 1 single pack 359 10 1 single pack Note: See page 20 for 3 and 4 107 Aluminum Roof Vent Fits ducts up to 10" round & 3 ¼" x 10" ducts Damper & screen 1 - roof vent 116 Aluminum Roof Vent Fits up to 7" round ducts Damper & screen 1 - roof vent Appliance (#1780) trays 1780 29" x 31" Standard Washer Tray (1 ½ depth) pack qty: 6 package: retail label & display tray washing machine trays Lambro manufactures two sizes of washing machine trays fitting under standard or oversized washing machines. Our trays fit under front or top load and double stacked washing machines. The trays are non breakable and include a drain fitting. Verify and comply with all local building codes. Protects floors from scuffs and overflow For use with standard size washing machines 1 - standard washer tray 1-1 drain fitting / washer / nut 1781 31" x 36" Oversized Washer Tray (2 ½ depth) pack qty: 2 package: retail label & display tray 1 - oversized washer tray 1-1 drain fitting / washer / nut Protects floors from scuffs and overflow For use with oversized washing machines 35 (800) 645-2860
lambro industries, inc. ordering information Phone Numbers (800) 645-2860 (888) 645-2860 (877) 645-2860 Fax Numbers (631) 842-8083 (631) 842-1841 Email & Website sales@lambro.net http://www.lambro.net Business Hours Monday through Friday 8:30am - 5:00pm EST terms & conditions Terms Manufacturing & Distribution Corporate Headquarters East Coast Facility Lambro Industries, Inc. 115 Albany Avenue Amityville, NY 11701 West Coast Facility Lambro West, Inc. 1575 Linda Way Suites 103 & 105 Sparks, NV 89431 Prepaid Shipping Prepaid shipping for orders exceeding $750.00 within the Continental United States, excluding Florida and Texas which are $1,000.00 prepaid. Shipping Lead Time Orders received before 4:00 PM EST will be shipped within 5 business days. Standard open account is Net 30 days from the date of invoice. All past due amounts are subject to a finance charge of 1.5% per month or 18.0% per annum on any past due balance. Any disputed balances should be brought to the attention of Lambro Industries, Inc. within 30 days from invoice date. If an invoice is held in question, the balance not in question shall be paid in accordance with the aforementioned terms. New accounts are subject to approval by our credit department. Shipping & Freight Policy Prepaid shipping for orders exceeding $750.00 within the Continental United States, excluding Florida and Texas which are $1,000.00 prepaid. Ordered Quantities Ordered quantities must coincide with product packaging configurations as detailed in Lambro s catalog and price insert sheet information. NO PARTIAL CARTON ORDERS - only full carton quantities per product. Return Policy No product returns will be accepted without an assigned Return Authorization Number. Return authorizations can be requested through Lambro s Customer Service Department at (800) 645-2860. Additional Return Criteria Returns are to be shipped freight prepaid, full cartons only, and packaged securely to prevent product damage in transit. Returned product must be less than 6 months old from invoice date. A 20% restocking fee associated with returned items. Discrepancies For damaged goods claims or reporting quantity discrepancies - incoming shipments must be inspected at the time of delivery, and properly noted on the delivery bill of lading. Please notify Lambro s Customer Service Department at (800) 645-2860 within 5 business days of receipt if there is a discrepancy. Terms & Conditions Ordering