POINT MODULE Fixture-Level Digital Control Product Overview
Point FITURE-LEVEL ITAL CONTROL The Right Control WHERE YOU NEED IT The Point is part of a complete building-wide lighting control solution which includes centralized relay panels, breaker panels, dimming panels and s. Mount an Point Module on each fixture for ultimate flexibility: reconfigurable lighting to meet your client s changing needs. The 30 amp relay means a Point Module can be mounted at the head of a row of fixtures and control the entire row. Three levels of control: Single Relay Bi-Level Switching Dimming Use centralized panels for site lighting and common areas. Use the for offices and meeting rooms requiring scene-based lighting control or integrated daylight harvesting with occupancy sensors and manual controls. Use Point for reconfigurable spaces and for retrofit solutions. RAPID MOUNTING OPTION All versions of the Point are available with the -QK (QuicK) Option. Fixture must be made with a mating connector. Currently available on I-Beam from Lithonia Lighting and specifications can be provided to your manufacturer on request. 1: Remove connection hatch and mount to Point Module (module may have hatch preinstalled by manufacturer to save time.) 2: Remove shorting plug and plug in Point Module. 3: Slip hatch over opening and screw down. Attach cables to module. On to the next fixture! POINT MANAGER SOFTWARE Point Manager Software is a straightforward interface to the system that allows for individual or bulk uploads of data to the Point Modules. Each module may be blinked for identification and then the address changed to match a pre-laid out plan. Zone Assignments are shown and can be changed. Work may be done off line and uploaded later.
WIRING DETAIL Single-Relay MOUNTING DETAIL Junction Box (Black) Switched (Yellow) Black (Load) Neutral (Black & Red) Yellow (Load A) Red (Load B) Black (Hot) Neutral Dual-Relay (Bi-Level) On-Fixture (Black & Red) Yellow (Load A Switched) Red (Load B Switched) Black (Load A) Neutral (Black) Yellow (Load) Gray (0-10V) Violet (0-10V) Black (Hot) White (Neutral) Black (Load B) Neutral Dimming (0 10V) Inside-Fixture (Black) Yellow (Switched) Gray (0-10V) Violet (0-10V) Black (Load) White (Neutral)
Warehouse CENTRALIZED & DISTRIBUTED CONTROL LEGEND Relay Panel PR Point Router Point Module Digital Switch Sensor Cat. 5 Cable Power Lighting Zones
Single CENTRALIZED & DISTRIBUTED CONTROL The drawings below relate to the equipment in the floorplan on the previous page. Micro- Panel Rocker Micro- Panel Sensor s Sensor FRONT OFFICES Relay Panel WAREHOUSE
Warehouse FITURE-LEVEL CONTROL LEGEND Relay Panel PR Point Router Point Module Digital Switch Sensor Cat. 5 Cable Power Lighting Zones PR
Single FITURE-LEVEL CONTROL The drawings below relate to the equipment in the floorplan on the previous page. Micro- Panel Rocker Micro- Panel Sensor s Sensor FRONT OFFICES Up to 125 modules or dimmers Up to 48 zones per channel Up to 4,000 feet Relay Panel Point Modules WAREHOUSE
Point Customer Satisfaction Free Design Assistance Our Sales Engineers are available to assist the design process with general advice or complete CAD drawings. Free Factory Programming When the system is started up at your site, it already knows the day, date and time and immediately starts operating. LC&D pre-programs all panels and equipment to your requirements. Free Dial-up Programming Almost all of our systems are shipped with a modem. Remote programming is so simple that we will do it for you, free. Free Telephone Support Engineers are available for design, installation, programming, technical support and to answer questions. Lighting Controls Online At www.lightingcontrols.com you can: Download any tech sheet, programming guide or installation manual Review the specifications of any LC&D product Learn about lighting controls basics through our online tutorials Download our free Unity software Download energy codes for any state in the U.S. Online live chat with an LC&D engineer And more point your browser to www.lightingcontrols.com today About Lighting Control & Design LC&D was founded in 1987 by David Wilson, an electrical engineer with years of experience designing lighting controls. His goal from the outset was to design a lighting control system which was easy to specify, install, program and use. At the same time, David sought to develop a complete stateof-the-art system. This has remained our commitment. With tens of thousands of panels shipped to North America, we have the products and the support to make any sized project go smoothly. Acuity Brands Controls The right control solution for every application, every performance requirement, every budget, every lighting system. Acuity Brands Controls offers multi-layered control solutions ranging from occupancy sensors and locking type photocontrols to the most sophisticated systems used to manage entire buildings and campuses. Whether your design goals prioritize energy savings, user comfort, flexibility, future re-configurability or simple code compliance, the combined resources of Acuity Brands Controls brings together over 200 dedicated sales and service people in three locations throughout the United States to bring you world-class sales and technical support. For the most demanding projects, our project management team is ready to help with any facet of the job-from design to construction to aftermarket support. That s the Acuity promise: control with confidence. 905 Allen Avenue, Glendale, CA 91201 800-345-4448 www.lightingcontrols.com 2010 Acuity Brands Controls. All Rights Reserved. Form No. 1382.055