HP1H-M-SN HP1V-M-SN HPH-M-SN HPV-M-SN HOLDING/PROOFING CABINETS APPLICATION To satisfy a need for high quality, shipboard grade, heated products, Cospolich has introduced their "HP" class of horizontal and vertical Hot Hold/Proofing cabinets These fully insulated cabinets are designed, in the Hold Mode, to keep prepared food at correct serving temperatures. In the Proofing Mode, humidity is introduced into the heated compartment to generate quantities of evenly raised dough. Air circulation is designed to give even temperature ranges throughout the compartment, whether in the Proofing or Holding modes. Angle tray slides accommodate either 18" x 6" or 1" x 0" pans. In the Hold Mode, the 000 Watt heater holds foods at up to 180 F (8 C). In the Proofing Mode, the separate 1850 Watt heating element will produce temperatures ranging from 80 F (6.5 C) to 95 F (35 C), with relative humidity of 95%. Exterior front mounted controls are easily adjustable and accessible, making adjustments, without interrupting process, possible. CONSTRUCTION Exterior and interior are constructed of 304 stainless steel, offering corrosion resistance and ease of cleaning. Coved corners on interior of unit aid in cleaning and reduce possibility of food or grease buildup. Paddle type, positive latching, with cylinder lock is provided on each door. Stainless steel base with front drip trough. OPTIONAL FOUNDATION Should the application require it, a foundation can be furnished. The foundation can be fabricated of either 7 gauge type 3 stainless steel or mild steel with corrosion resistant coating. The foundation is secured to the deck, and the Hot Holding/Proofing cabinet is attached to the foundation with rear clips and front bolts. FEATURES Fully insulated cabinet 304 Stainless Steel construction Front mounted control panel Heavy duty heating elements Lockable positive latching HPH-M-SN OPTIONAL MODULAR CONSTRUCTION Where accessibility is restricted, these units can be furnished in Cospolich MODULAR construction. OPTIONS Digital Thermometer 08 or 40 Volt service Chart recorder Tempered glass doors Padlockable hasp Casters Adjustable stainless steel legs Modular construction Vertical or horizontal cabinets Stainless Steel or Mild Steel foundation HOLDING/PROOFING padasdasasda CABINETS www.cospolich.com CONTACT FACTORY FOR YOUR SPECIFIC CAPACITY
HP1H-M-SN HP1V-M-SN HPH-M-SN HPV-M-SN DIMENSIONAL DATA Width Overall (in / mm) Depth Overall (in / mm) Height Overall (in / mm) Depth with Door Open (in / mm) Number of Doors Weight (lbs / kg) ELECTRICAL DATA Voltage Total Amperes Total Wattage (Proof) Total Wattage (Hold) SHIPPING DATA Width-Crated (in / mm) Depth-Crated (in / mm) Height-Crated (in / mm) Weight-Crated (lbs / kg) Volume-Crated (cu ft / ltr) HP1H-M-SN 8 / 711 50.5 / 183 1 38 / 107 1850 000 34/ 864 378 / 170 56 / 736 HPH-M-SN HP1V-M-SN HPV-M-SN 46 / 18 8 / 711 46 / 18 60 / 154 60 / 154 50.5 / 183 50.5 / 183 50.5 / 183 4 340 / 153 500 / 5 715 / 3 * () 1850 1850 1850 () 000 000 000 () *30 Amp Breaker Required per section 5 / 131 34 / 864 5 / 131 66 / 76 66 / 76 539 / 4 793 / 357 1134 / 510 39 / 1104 47 / 1331 7 / 039 HPH-M-SN THIS UNIT IS AVAILABLE IN OUR SPECIAL MODULAR CONSTRUCTION CONTACT FACTORY FOR YOUR SPECIFIC CAPACITY
HP1H-M-SN-MLR HPH-M-SN-MLR HP1V-M-SN-MLR HPV-M-SN-MLR HOLDING/PROOFING CABINETS APPLICATION To satisfy a need for high quality, shipboard hatchable grade, heated products, Cospolich has introduced their "HP" class of horizontal and vertical modular Hot Hold/Proofing cabinets These fully insulated cabinets are designed, in the Hold Mode, to keep prepared food at correct serving temperatures. In the Proofing Mode, humidity is introduced into the heated compartment to generate quantities of evenly raised dough. Air circulation is designed to give even temperature ranges throughout the compartment, whether in the Proofing or Holding modes. Angle tray slides accommodate either 18" x 6" or 1" x 0" pans. In the Hold Mode, the 000 Watt heater holds foods at up to 180 F (8 C). In the Proofing Mode, the separate 1850 Watt heating element will produce temperatures ranging from 80 F (6.5 C) to 95 F (35 C), with relative humidity of 95%. Exterior front mounted controls are easily adjustable and accessible, making adjustments, without interrupting process, possible. MODULAR The modular construction of these shipboard hatchable units, which can be disassembled, brought into the vessel and reassembled in place, has virtually eliminated the need for hull cuts and hatch modifications. Exterior and interior are constructed of 304 stainless steel, offering corrosion resistance and ease of cleaning. Coved corners on interior of unit aid in cleaning and reduce possibility of food or grease buildup. Paddle type, positive latching, with cylinder lock is provided on each door. Stainless steel base with front drip trough. OPTIONAL FOUNDATION Should the application require it, a foundation can be FEATURES Fully insulated cabinet 304 Stainless Steel construction Front mounted control panel Heavy duty heating elements Lockable positive latching HPH-M-SN-MLR furnished. The foundation can be fabricated of either 7 Ga. type 3 stainless steel or mild steel with corrosion resistant coating. The foundation is secured to the deck, and the Hot Holding/Proofing cabinet is attached to the foundation with rear clips and front bolts. OPTIONS Digital Thermometer 08 or 40 Volt service Chart recorder Tempered glass doors Padlockable hasp Casters Adjustable stainless steel legs Conventional construction Vertical or horizontal cabinets Stainless Steel or Mild Steel foundation MODULAR HOLDING/PROOFING CABINETS www.cospolich.com CONTACT FACTORY FOR YOUR SPECIFIC CAPACITY
DIMENSIONAL DATA Width Overall (in / mm) HP1H-M-SN 8 / 711 HPH-M-SN 46 / 18 HP1V-M-SN 8 / 711 HPV-M-SN 46 / 18 MODEL NUMBERS: HP1H-M-SN-MLR HPH-M-SN-MLR HP1V-M-SN-MLR HPV-M-SN-MLR Depth Overall (in / mm) Height Overall (in / mm) 60 / 154 60 / 154 Depth with Door Open (in / mm) 50.5 / 183 50.5 / 183 50.5 / 183 50.5 / 183 Number of Doors 1 4 Weight (lbs / kg) 38 / 107 340 / 153 500 / 5 715 / 3 ELECTRICAL DATA Voltage Total Amperes * () Total Wattage (Proof) 1850 1850 1850 1850 () Total Wattage (Hold) 000 000 000 000 () SHIPPING DATA Width-Crated (in / mm) Depth-Crated (in / mm) Height-Crated (in / mm) Weight-Crated (lbs / kg) Volume-Crated (cu ft / ltr) 34/ 864 378 / 170 56 / 736 *30 Amp Breaker Required per section 5 / 131 539 / 4 39 / 1104 34 / 864 66 / 76 793 / 357 47 / 1331 5 / 131 66 / 76 1134 / 510 7 / 039 HPH-M-SN-MLR THIS UNIT IS AVAILABLE IN OUR SPECIAL MODULAR CONSTRUCTION CONTACT FACTORY FOR YOUR SPECIFIC CAPACITY
THW30-M-SN THW50-M-SN THW60-M-SN THAW CABINET APPLICATION The increased concern of product defrosting as well as the economy of time, has made the introduction of the thaw cabinet a necessity. The advantages of such a system are a reduction in spoilage and product loss, as well as the ability to handle a great amount of product within a shorter time period. The quality of the product is also retained since there is total control of temperature througout the thawing process. OPERATION By balancing the introduction of defrosting head with evenly directed and controlled air circulation the thawing process is accomplished in a significantly reduced period of time without spoilage. The system is designed to operate in two seperate modes, thaw and refrigerator. Initial frozen product introduced into the cabinet will trigger the thaw cycle. Early on there will be a continual air circulation with the cycling of the heaters, which will speed up the defrosting. While defrosting, the product temperature will not be allowed to rise above 50 degrees F. This is maintained by a back up refrigeration system. The success of the defrosting is based on the balance of heat, air circulation, and refrigeration. PERFORMANCE DISCLAIMER The results obtained in using the thaw cabinet are dependent upon many criteria such as product type, size, packaging, room temperature, etc. Therefore it may be necessary to consult with Cospolich engineers or its representatives to gain an understanding of how the equipment will perform in your application. THW30-M-SN SERVICE AID An optional service kit, including spare parts and installation instructions, is available for each model. U.L. and U.S.P.H The equipment is built in accordance with Underwriter s Laboratories, Inc. for safety and sanitation and is built according to standards as set forth by the U.S. Public Health Services. THIS UNIT AVAILABLE IN OUR SPECIAL MODULAR CONSTRUCTION CABINET CONSTRUCTION Exterior and interior of all standard cabinets, including front, sides, doors and louvered grill are constructed of heavy gauge, type 304 stainless steel. Special attention was taken in engineering the doors of the Cospolich cabinet. The door unit was designed to withstand the continuous use and abuse that is common in all food service applications. Resilient vinyl gaskets, which are pre-formed in frames with welded corners, greatly inhibit bacterial growth and are easily replaceable. Heaters, which are concealed under the thermal breaker strip around the door perimeter, prevent condensation. REFRIGERATION SYSTEM All components of the refrigeration system, with the exception of the air handlers, are bottom mounted on a heavy duty base frame behind a louvered grill which is easily removable without the use of tools. The condensing unit is mounted on a slide out rail for ease in cleaning and servicing. Cabinet body and doors are insulated with foamed-in-place polyurethane foam, providing for excellent rigidity and the best insulating properties in the industry. HARDWARE Positive lockable latches are included to assure positive latching and sealing. Heavy duty chrome plated hinges are provided on all Thaw Cabinets. FEATURES Stainless steel interior and exterior (exposed) Oversized refrigeration system Anti-condensate door heaters Heavy-duty chrome-plated hardware Door with adjustable alignment Epoxy coated adjustable shelving with front rails Removable grill Polyurethane insulation Slide-out condensing unit Resilient gaskets Exterior LED thermometer Condensate Evaporator Pan OPTIONS Food files Special dimensions Special voltages and currents All stainless steel exterior Mil-Spec units Heavy-duty adjustable legs Spring closing hinges Aluminum construction for weight sensitive applications Fresh and sea water cooled condensing units Stainless steel adjustable shelving with front rail Foundation Spare parts kit Front Venting www.cospolich.com CONTACT FACTORY FOR YOUR SPECIFIC CAPACITY
DIMENSIONAL DATA Width Overall (in / mm) Depth Overall (in / mm) Height Overall (in / mm) Interior Width (in / mm) Interior Depth (in / mm) Interior Height (in / mm) Depth Over Body (in / mm) OA Depth with Door Open 90 ( in / mm) Clear Door Width (in / mm) Clear Door Height in / mm) Number of Doors Weight (lbs / kg) ELECTRICAL DATA THW30-M-SN 39.5/997 36.5 / 97 78/ 1981 34.5/ 870 34.5/ 876 55 / 1397 34.5/ 870 54.5/ 1384 1080/ 490 THW50-M-SN 51 /195 36.5 / 97 78 / 1981 46 / 1549 34.5 / 876 6 / 1575 46 / 18 54.5 / 1384 65 / 755 THW60-M-SN 79 / 1981 36.5 / 97 78 / 1981 70 / 1778 34.5 / 876 55 / 1397 34 / 864 54.5 / 1384 4 50 / 101 THW30-M-SN THW50-M-SN THW60-M-SN Voltage RLA Amps / Defrost Amps (Freezer) REFRIGERATION DATA 7.8 / 15 7.8 / 15 7.8 / 15 7.8 / 15 Compressor H.P. BTU / HR - KCAL / HR at 90 SHIPPING DATA 1/3 850 / 717 1/3 850 / 717 1/3 1/3 850 / 717 850 / 717 Width-Crated (in / mm) Depth-Crated (in / mm) Height-Crated (in / mm) Weight-Crated (lbs / kg) Volume-Crated (cu ft / ltr) 41.5 / 1048 40.5 / 109 83 / 108 1134 / 514 80 / 65 53 / 1346 40.5 / 109 83 / 108 1748 / 793 103 / 917 80 / 03 40.5 / 109 83 / 108 363 / 107 156 / 4417 Model Shown THW30-M-SN Naval Shipboard Models Available
THW30-M-SN-MLR THW50-M-SN-MLR THW60-M-SN-MLR APPLICATION The increased concern of product defrosting as well as the economy of time, has made the introduction of the thaw cabinet a necessity. The advantages of such a system are a reduction in spoilage and product loss, as well as the ability to handle a great amount of product within a shorter time period. The quality of the product is also retained since there is total control of temperature througout the thawing process. MODULAR THAW CABINET OPERATION By balancing the introduction of defrosting head with evenly directed and controlled air circulation the thawing process is accomplished in a significantly reduced period of time without spoilage. The system is designed to operate in two seperate modes, thaw and refrigerator. Initial frozen product introduced into the cabinet will trigger the thaw cycle. Early on there will be a continual air circulation with the cycling of the heaters, which will speed up the defrosting. While defrosting, the product temperature will not be allowed to rise above 50 degrees F. This is maintained by a back up refrigeration system. The success of the defrosting is based on the balance of heat, air circulation, and refrigeration. PERFORMANCE DISCLAIMER The results obtained in using the thaw cabinet are dependent upon many criteria such as product type, size, packaging, room temperature, etc. Therefore it may be necessary to consult with Cospolich engineers or its representatives to gain an understanding of how the equipment will perform in your application. CABINET CONSTRUCTION Exterior and interior of all standard cabinets, including front, sides, doors and louvered grill are constructed of heavy gauge, type 304 stainless steel. Special attention was taken in engineering the doors of the Cospolich cabinet. The door unit was designed to withstand the continuous use and abuse that is common in all food service applications. Resilient vinyl gaskets, which are pre-formed in frames with welded corners, greatly inhibit bacterial growth and are easily replaceable. Heaters, which are concealed under the thermal breaker strip around the door perimeter, prevent condensation. REFRIGERATION SYSTEM All components of the refrigeration system, with the exception of the air handlers, are bottom mounted on a heavy duty base frame behind a louvered grill which is easily removable without the use of tools. The condensing unit is mounted on a slide out rail for ease in cleaning and servicing. Cabinet body and doors are insulated with foamed-in-place polyurethane foam, providing for excellent rigidity and the best insulating properties in the industry. HARDWARE Positive lockable latches are included to assure positive latching and sealing. Heavy duty chrome plated hinges are provided on all Thaw Cabinets. www.cospolich.com THW30-M-SN-MLR SERVICE AID An optional service kit, including spare parts and installation instructions, is available for each model. U.L. and U.S.P.H The equipment is built in accordance with Underwriter s Laboratories, Inc. for safety and sanitation and is built according to standards as set forth by the U.S. Public Health Services. THIS UNIT AVAILABLE IN OUR SPECIAL MODULAR CONSTRUCTION FEATURES Stainless steel interior and exterior (exposed) Oversized refrigeration system Anti-condensate door heaters Heavy-duty chrome-plated hardware Door with adjustable alignment Epoxy coated adjustable shelving with front rails Removable grill Polyurethane insulation Slide-out condensing unit Resilient gaskets Exterior LED thermometer Condensate Evaporator Pan OPTIONS Food files Special dimensions Special voltages and currents All stainless steel exterior Mil-Spec units Heavy-duty adjustable legs Spring closing hinges Aluminum construction for weight sensitive applications Fresh and sea water cooled condensing units Stainless steel adjustable shelving with front rail Foundation Spare parts kit Front Venting CONTACT FACTORY FOR YOUR SPECIFIC CAPACITY
DIMENSIONAL DATA Width Overall (in / mm) THW30-M-SN-MLR 39.5/997 THW50-M-SN-MLR 51 /195 THW60-M-SN-MLR 79 / 1981 THW30-M-SN-MLR THW50-M-SN-MLR THW60-M-SN-MLR Depth Overall (in / mm) 36.5 / 97 36.5 / 97 36.5 / 97 Height Overall (in / mm) 78/ 1981 78 / 1981 78 / 1981 Interior Width (in / mm) 34.5/ 870 46 / 1549 70 / 1778 Interior Depth (in / mm) Interior Height (in / mm) Depth Over Body (in / mm) 34.5/ 876 34.5 / 876 34.5 / 876 OA Depth with Door Open 90 ( in / mm) 55 / 1397 6 / 1575 55 / 1397 Clear Door Width (in / mm) 34.5/ 870 46 / 18 34 / 864 Clear Door Height in / mm) 54.5/ 1384 54.5 / 1384 54.5 / 1384 Number of Doors 4 Weight (lbs / kg) 1080/ 490 65 / 755 50 / 101 ELECTRICAL DATA Voltage RLA Amps / Defrost Amps (Freezer) 7.8 / 15 7.8 / 15 7.8 / 15 7.8 / 15 REFRIGERATION DATA Compressor H.P. 1/3 1/3 1/3 1/3 BTU / HR - KCAL / HR at 90 850 / 717 850 / 717 850 / 717 850 / 717 SHIPPING DATA Width-Crated (in / mm) 41.5 / 1048 53 / 1346 80 / 03 Depth-Crated (in / mm) 40.5 / 109 40.5 / 109 40.5 / 109 Height-Crated (in / mm) 83 / 108 83 / 108 83 / 108 Weight-Crated (lbs / kg) 1134 / 514 1748 / 793 363 / 107 Volume-Crated (cu ft / ltr) 80 / 65 103 / 917 156 / 4417 Model Shown THW30-M-SN-MLR Naval Shipboard Models Available