Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-IS-13119-01-00 according to DIN EN ISO/IEC 17020:2012 Period of validity: 18.09.2017 to 07.11.2018 Holder of certificate: IMA Materialforschung und Anwendungstechnik GmbH Wilhelmine-Reichard-Ring 4, 01109 Dresden for its inspection body Type A at the location: Wilhelmine-Reichard-Ring 4, 01109 Dresden (BI 1) Am Lagerplatz 4, 01099 Dresden (BI 2) Inspections in the fields: Inspection of products, product groups and structural elements in the product fields vessels, profiles as well as pipes, pipe form elements, armatures and pipe systems from plastics, fibre plastics composites, plastics metal composites, metal and inspection of factory production control of products (vessels, profiles, pipes, pipe form elements, armatures and pipe systems from plastics, fibre plastics composite, plastics metal composites), metal, metallic product groups and structural elements in accordance with specifications and determination of their conformity with specific requirements and on the basis of professional judgment, general requirements Abbreviations used: see last page This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/8
Inspections according to inspection procedure QBI/1 2016-11 Work instruction of IMA Inspection body Standard operating procedure Inspections for examining products, factory production inspections as well as sampling at production location Inspections in the following fields are done in accordance with the specifications defined by the respective certification schemes, evaluation and basic normative documents 1. Plastics structural elements (BI 1) DIBt Building code of German states PÜZ List part IIa Serial no. 41.1/2 DIBt Building code of German states PÜZ List part IIa Serial no. 41.2/1 DIBt Building code of German states PÜZ List part IIa Serial no. 6.1/1, 6.1/3, 6.1/4 DIBt Building code of German states PÜZ List part IIa Serial no. 1.5/5 DIN EN 13245-2 2010-11 DIN EN 14509 2013-12 Vessels, containers and retaining devices as well as collecting pits without outlets made from thermosetting plastics; reaction resin, textiles reinforced materials 1 Coatings for container walls and deflection surfaces 1 Structural elements made of composite materials and glass fibre reinforced plastics1; structural elements made of thermoplastics1; reaction resin composite construction materials1 Textile reinforcements Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes Self-supporting double skin metal faced insulating panels Factory made products Specifications Period of validity: 18.09.2017 to 07.11.2018 - Translation - 2/8
Quality regulations for sandwich elements and profiles EPAQ, 2016-11 DIN EN 14782 2006-03 EAD 260001-00-03.03 2016-04 Quality regulations of European Association for Panels and Profiles (PPA-Europe) for sandwich elements and cold formed profiles Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements Structural sections and decks made from fibre reinforced polymers (FRP/glass fibre composites); EOTA file No. 13-26-0001-03.03 2. Pipes systems (BI 2) DIN 8076 2013-09 DIN EN 253 2015-12 DIN EN 448 2016-02 DIN EN 489 2009-07 DIN EN 1254-3 1998-03 DIN EN 1254-8 2012-08 DIN CEN/TS 12201-5 2014-05 DIN CEN/TS 1555-5 2014-04 Pressure pipelines made from thermoplastics materials Metal and plastics compression fittings for polyethylene (PE) pipes District heating pipes Preinsulated bonded pipe systems for directly buried hot water networks Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes Copper and copper alloys - Plumbing fittings - Part 8: Fittings with press ends for use with plastics and multilayer pipes; Plastics piping systems for water supply, and for drainage and sewerage under pressure Polyethylene (PE) Part 5: Fitness for purpose of the system; Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) Part 5: Fitness for purpose of the system; Period of validity: 18.09.2017 to 07.11.2018 - Translation - 3/8
DIN ISO/TS 15874-7 2004-03 DIN CEN/TS 14632:2012-05; DIN SPEC 19939:2012-05 DIN ISO/TS 15875-7 2004-03 DIN ISO/TS 15876-7 2004-03 DIN ISO/TS 15877-7 2010-02 DIN CEN IS0/TS 22391-7 03-2012-03 DIN CEN ISO/TS 21003-7 2010-12 DVGW CERT 40014-11-N-DE 01/2017 DVGW W 534 2015-07 DVGW W 540 2010-08 DVGW W 542 2009-08 DVGW W 543 2005-05 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity;; Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE X).Part 7: Guidance for the assessment of conformity Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) -Part 7: Guidance for the assessment of conformity Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance (PE-RT) Part 7: Guidance for the assessment of conformity Multilayer piping systems for hot and cold water installations inside buildings Part 7: Guidance for the assessment of conformity Rules of procedure for the certification of products in nonharmonised field Pipe connectors and pipe joints in drinking water installation Intrinsically safe apparatus for connection to the drinking water installation Multiple layer piping systems in drinking water installation Pipe connectors and connections in drinking installation Period of validity: 18.09.2017 to 07.11.2018 - Translation - 4/8
DVGW W 544 2007-05 DVGW W 570-1 2013-03 DVGW W 570-2 2008-01 DVGW W 570-3 2013-12 DVGW W 579 2015-09 DVGW GW 335-A1 2003-06 DVGW GW 335-A2 2005-11 DVGW GW 335-B2 2004-09 DVGW GW 335-B3 2011-09 DVGW GW 335-B4 2014-04 DVGW G 5614 2013-12 DVGW G 5600-1 2014-02 DVGW W 574 2007-04 Plastic pipes in drinking water installations Fittings for drinking water installation - Part 1: Requirements and tests for building fittings Fittings for drinking water installation - Part 2: Requirements and tests for safety valves Fittings in the drinking water installation - building and safety fittings and / or combinations in special designs for applications according to DIN EN 806 and DIN EN 1717 in conjunction with DIN 1988 Sampling Valves in Drinking Water Installations - Requirements and Tests requirements and testing part A1: PVC U pipes and fittings / components for water distribution requirements and testing Part A2: PE 80 and PE 100 requirements and testing part B2: PE 80 and PE 100 fittings requirements and testing part B3: mechanical connectors made from plastics (POM, PP) for water distribution part B4: fittings with metallic covering with mechanical or spigot and socket connectors for water distribution Permanent pipe joints for metal gas lines press connectors Metallic material intersection connector for polyethylene gas pipes Requirements and testing Section Sanitary valves as extraction fittings for drinking water installation Requirements and tests Period of validity: 18.09.2017 to 07.11.2018 - Translation - 5/8
DVGW VP 615 1996-07 DVGW VP 640 2003-08- DIN Certco Certification program (ZP) 2015-01 DIN Certco Certification program (ZP) 2015-03 DIN Certco Certification program (ZP) 2015-03 DB Standard DBS 918 064 2008-12- SKZ-HR 3.2 2015-04 SKZ-HR 3.3 2015-04 SKZ-HR 3.12 2015-06 SKZ-HR 3.13 2006-05 SKZ-HR 3.16 2015-04 SKZ-HR 3.26 2015-02 INSTA-CERT 2012-02 INSTA SBC ISO 21003 2015-01 Pressure pipes, fittings and pipe connections from glass fibre reinforced polyester resin (UP GF) for potable water pipelines requirements and testing PE Xb and PE Xc pipes Plastic pipes and systems for warm water surface heating and heating element connections Plastic pipe system (pressure pipes and fittings) Plastic pipe system (sewers and waste water pipes ) Plastic pipes and fittings for drainage in train facilities Heating pipes made of crosslinked polyethylene PE-X Heating pipes made of polyethylene Heating pipes made of HDPE/AL/HDPE-multilayer pipe Heating pipes made of crosslinked polyethylene of medium density PE-MDX Heating pipes made of polyethylene with raised temperature resistance Geothermal Probes, Pipes and Fittings made of Polyethylene, PE 100, for Geothermal Products General Rules for the services provided by INSTA-CERT Product certification (GRC) February 2012 Specific rules for Nordic certification in accordance with ISO 21003 Multilayer piping systems for hot and cold water installations inside buildings Period of validity: 18.09.2017 to 07.11.2018 - Translation - 6/8
SVGW ZW 101 SVGW GW/TPG-TPW 101 d 2004-10 SVGW ZW 106 2016-07 SVGW ZW 110 SVGW ZW 125 SVGW ZW 129 SVGW ZW 142 KIWA BRL-K536 part D 15-12-2011 KIWA BRL-K536 part E 15-12-2011 KIWA BRL-K536 part G 15-12-2011 KIWA BRL-K774/06 01-02-2012 KIWA GASTEC QA KE 186 November 2012 Executive order No. 666 of 20 May 2015 GDV/ Version 2.0 of 22 May 2015 General terms and conditions of SVGW Certification body Water, SVGW ZertW Regulations for the SVGW approval of pipes and piping system parts of plastic for use in the gas and drinking water areas Waste fitting and Angled isolating valve Isolation valves Drinking water distribution systems with pipes made of PE-X Drinking water distribution systems with pipes made of PB Drinking water distribution systems with multilayer composite pipes Evaluation guideline for the Kiwa (technical approval with) product certificate for plastic piping systems of PE-X intended for transport of hot and cold drinking water Evaluation guideline for the Kiwa (technical approval with-) product certificate for plastic piping systems of PE-X /Al intended for transport of hot and cold drinking water Evaluation guideline for the Kiwa (technical approval with-) product certificate for plastic piping systems of PE-RT /Al intended for transport of hot and cold drinking water Evaluation guideline for the Kiwa product certificate for Compression fittings to tighten with matching clamping device Approval Requirements 186 for the GASTEC QA product certificate for press fittings for joining copper pipes Danish Ministry of Transport and Building (Issue of approvals for building components that come into contact with drinking water) Inspection guidelines for building components approved for drinking water Period of validity: 18.09.2017 to 07.11.2018 - Translation - 7/8
Abbreviations used: BRL DBS DIBt DIN DIN Certco DVGW EN GASTEC QA GW/TPG-TPW GDV HR INSTA SBC ISO KIWA QBI SKZ SVGW Z ZP Beurteilungsrichtlinie (Specification for evaluation) Deutsche Bahn Standard Deutsches Institut für Bautechnik Competence Centre for Construction German Institute of Standardisation DIN CERTCO certification body for conformity assessment Deutsche Vereinigung des Gas- und Wasserfaches e.v. German Association of Gas and Waterworks European Standard Recognition specifications from KIWA SVGW Prüf- / Zertifizierungsreglement Godkent til Drikkevand (Denmark) Danish GDV scheme fee funded approval scheme for building components in contact with drinking water Testing and inspection requirements of SKZ Specific rules for Nordic certification International Organisation for Standardisation Formerly: Keurings instituut voor waterleiding Artikelen (Dutch Test Institute for drinking water articles) (Today: proper name) Quality management procedure of IMA-Dresden Süddeutsches Kunststoffzentrum - South German Plastics Centre Swiss Association of Gas and Waterworks Building code approval of DIBT Competence Centre for Construction Certification programme of DIN-Certco Period of validity: 18.09.2017 to 07.11.2018 - Translation - 8/8