ANALOGUE FIRE DETECTION SENTRI SYSTEM

ANALOGUE FIRE DETECTION SENTRI SYSTEM

SMS SMS is a Honeywe Life Safety Systems business, based in the UK offering a wide range of market eading fire detection and aarm products. Operating for over 25 years, SMS works in partnership with seected fire aarm instaers across the ength and breadth of the United Kingdom. The SenTRI System products are avaiabe to 150 approved, trained and certified companies, providing choice and expertise in a manner of services required. A fu ist of SMS approved SenTRI partners are avaiabe on request. SenTRI system products carry third party LPCB product approvas and are manufactured within an accredited ISO9001:2008 pant. Honeywe is proud of it s innovation in technoogy deivering eading and dependabe fire detection and aarm equipment across the gobe. Aside from providing fire detection and aarm systems, Honeywe aso offers expertise in security products, buiding contro management products as we as wiring and eectrica devices.

SENTRI SYSTEM 10 reasons to choose the SenTRI System 1 Choice of where you buy your SenTRI System from and who then services and maintains it after instaation. SMS offers 150 approved and trained UK wide partners to seect from. SenTRI sensor seection minimise fase aarms using true anaogue sensing technoogy. Each sensor incudes a range of seectabe sensitivity states aowing for individua settings to be appied to minimise unwanted aarm events. 3 SenTRI sensors have integra sounders and Visua aarms certified to EN54 Parts 3 and 23. Integra sensor sounders aow for cost effective changes to be made when required, without the need for expensive instaation costs associated with additiona wiring or power suppies. 5 Every SenTRI system device incudes a oop wiring isoator unit as standard. This aows every device to be considered for use at zone boundaries as we as the abiity to quicky pinpoint system or wiring fauts. Scaabe in size, SenTRI offers system technoogy to a sizes of buiding from 1 oop systems for sma to medium sized buidings, right up to networked 4 oop systems for arge buidings where compex evacuation principes may prevai. 7 The system products carry fu third party certification from the Loss Prevention Certification Board (LPCB) to the appicabe standards under EN54. Backwards compatibiity. SenTRI system products are designed with ongevity and compatibiity in mind and can be used on predecessor systems within the SMS portfoio. 9 Support and backup. A SenTRI partners compete up to 5 days of product and system training to engineers and aso support system instaations to customers satisfaction. This support is backed up with technica site support services as and when required. Products are manufactured in an ISO9001:2008 approved pant.

The SenTRI ONE Contro Pane SenTRI ONE is a singe oop anaogue addressabe pane with an intuitive user interface and attractive appearance. Managing up to 127 devices on the oop, SenTRI ONE is idea for sma systems. SenTRI ONE Contro Pane SenTRI ONE has been designed with ease of use as a high priority. From instaation and commissioning to everyday use, this modern ooking pane deivers an experience that makes the fire aarm system easy to use and safe to operate. SenTRI ONE operates the atest range of SenTRI oop devices. This aows a sma system to benefit from advanced fire detection technoogy and powered oop performance. Key features of the SenTRI ONE system: Weeky test reminder. If seected, the system wi identify and advise which manua ca point shoud be next tested in sequence, as per the requirements of BS5839 Part 1 TYPICAL SenTRI ONE SYSTEM Printer Conventiona Sounders (2 master aarm circuits) Repeat Indicator Pane SenTRI ONE Contro Pane 24V suppy USB RS485 Fire reay change over contacts rated 1A @ 24V dc Monitored Input Faut reay change over contacts rated 1A @ 24V dc 230V ac Maintenance reminder. If seected, the system wi advise when the system requires a standard maintenance visit Simpe to use fire pans aow for the system to be used in smaer premises that can take advantage of the sensing technoogy that prevents fase aarms Straight forward and easy to use menus aow the user to quicky identify the detais of RS232 Printer Port Remote LED Loop circuit Interface Input output signas may be used to contro fire dampers and pant equipment SenTRI Sensor SenTRI Strobe T-breaker Interface SenTRI Sensor T-breaker SenTRI Strobe Beam Transmitter Beam Receiver SenTRI Sensor fire and faut events * The strobe devices shown are not visua aarm devices and do not meet EN54 Part 23

SENTRI SYSTEM The SenTRI TWO Contro Pane The SenTRI TWO anaogue addressabe pane offers extended features over the SenTRI ONE pane for medium sized buiding appications. Features extend to provide non aarm functionaity, user defined programming options and greater capacity within the system size. SenTRI TWO Contro Pane The pane is capabe of accommodating up to 200 devices incuding sensors, sounders, Sensor sounders and visua aarms certified to EN54 Part 23, manua ca points and a wide range of interface units. The pane can aso accommodate a fuy functiona oop powered repeat indicating pane. The SenTRI TWO contro pane incudes a key access on the front door for quick and easy access to contros for sience, sound and reset. TYPICAL SenTRI TWO SYSTEM Key features of the SenTRI TWO system: Up to 4 LCD Repeat Indicators RS 485 Up to 200 devices per oop incorporating high quantities of both sensor sounders and sensor sounder strobes certified to EN54 Part 23 devices Sounder SenTRI Sounder SenTRI TWO Contro Pane Door Reease or Pant Shutdown Interface Networkabe up to 31 contro panes on a secure network; aowing seamess contro for the overa system from any one pane Interface Sprinker Sentri Activated Beam Transmitter 800mA Aarm Load SenTRI Sensor Sounder VAD Beam Receiver User defined programmabe contros which can be activated by buttons, keys or the in-buit caendar function SenTRI Sensor Sounder VAD SenTRI Sounder Semi-fush recess option for ocations that require a discreet smart aesthetica appearance Functiona Repeat Pane

The SenTRI FOUR Contro Pane The SenTRI FOUR oop anaogue addressabe pane offers medium to arge sized buiding owners the atest in system fexibiity and contro pane aesthetics. SenTRI FOUR Contro Pane The pane accommodates up to 4 oops, each of which is capabe of driving up to 200 devices incuding sensor sounders, sounder strobes* and beam sensors. The pane provides a high eve of programmabe capabiity for use in buidings where compex site cause and effects are required across a number of ocations and zones. Key features of the SenTRI FOUR system: TYPICAL SenTRI FOUR SYSTEM A buit in printer provides easy access to a wide range of system information Repeat Pane SenTRI Sensor Sounder Breaker Extended power suppy and battery capabiity provides battery backup for up to 72 hours foowed by 30 minutes of aarm Aarm Sounder Beam Transmitter 800mA Aarm Load Interface Units Sprinker Door Reease or Pant Shutdown SenTRI Sensor Sounder Beam Receiver Can be networked aongside SenTRI TWO contro panes, providing fexibiity on sites requiring a mixture of oop configurations Manned Centre Link to Fire Station Secure Copper Network SenTRI Sensor Node Loop 2 Loop 3 Loop 4 Loop 1 Secure Copper Network Programming aows for point to point device actions across both oops and networks giving high eves of contro in the event of a fire SenTRI Sensor Node Node Loop 2 Loop 3 Loop 4 Loop 1 4 oop, 24 hour standby Up to 200 Devices per Loop SenTRI Sensor/ Sounder VAD

SENTRI SYSTEM SenTRI Loop Devices: Three functions in one Our extensive range of SenTRI oop devices are easy to use and compatibe with our fu pane range. Reduce system costs by taking fu advantage of the SenTRI mutifunction devices that combine fire sensing with a sounder and/or a EN54-23 VAD. Fewer devices means ess cabing and therefore reduced time spent on site. Because a of the SenTRI devices are powered by the oop each device requires just one pair of cabes and one set of terminations to provide a of its muti-sensor, sensor sounder and sensor sounder with EN54-23 VAD functionaities. SenTRI easy to specify and Insta There is a buit-in isoator in every singe SenTRI device saving you more money whist improving the integrity of the system Each sensor has a monitored ine that can be configured for a fire output or a fire input this may remove the need and cost for a separate interface One base fits a! The SenTRI sensor range a fit a standard 1st fix sensor base saving you additiona costs on separate bases SenTRI fuy compiant systems The capabiity and functionaity of the panes couped with our SenTRI devices ensures that the system compies with the requirements of: The Buiding Reguations Approved Document B&M The British Standard BS5839-1:2013

SenTRI Sensors The new patented SenTRI Sensors with buit in sounder and VAD. SenTRI Sensors ensure peace of mind Advanced sensor technoogy ensures rapid detection of rea fires and minimises the ikeihood of fase triggers Mutisensor optica heats ensure a speedy response to a wide range of fire types Combined sensor sounder VADs ensure a occupants in a buiding are effectivey warned of any emergency deivering easy compiance with The Equaity Act 2010 (formery The Disabiity Discrimination Act Part III 1995) Individuay addressed devices mean that the source of a fire can be pinpointed aowing effective action without unnecessary deay SenTRI Sensor Sounder Patented sounder design resuts in ow current devices with high output a in a neat and compact design Tones can be programmed to avoid confusion with other system aarms Different signas for up to 3 eves of aarm aows phased evacuation and fexibe fire pans with standard equipment An individua voume contro soft start option, couped with synchronised tones throughout the buiding means effective warning without unnecessary panic SenTRI Sensor Sounder VAD Integra high intensity oop powered VAD in accordance with EN54 Part 23 provides visibe warning in high noise areas and for peope with impaired hearing Low power consumption means that each oop can power up to 100 sensor sounders with VAD Independent contro of the VAD and the sounder aows sient aert for staff in pubic areas ahead of a genera aarm aowing a managed and safe evacuation from pubic buidings The sensor sounder VADs have an optiona be tone which can be used for cass change signa in schoos SenTRI sound and VAD signas are synchronised across oops to ensure messages are ceary understood SENTRI OPTICAL/ HEAT MULTISENSOR SENSITIVITY STATES STATE Optica Smoke channe Heat Channe 0 STATE 0# Medium sensitivity optica Cass A1 heat 2 Low sensitivity optica Cass A1 heat 3 High sensitivity optica, Cass A1 heat Cass A1 heat 4 Medium sensitivity (no spike fiter) Cass A1 heat 5 Medium sensitivity optica Cass B heat 6 Low sensitivity optica, Cass BS heat Cass BS heat 7 Medium sensitivity optica Cass A2S heat 8 Deayed medium sensitivity optica Cass A1 heat 11 Low sensitivity optica Cass B heat 12 Cass A1 heat ony The tabe shows the various states of these smoke sensor options.

SENTRI SYSTEM Loop Powered Devices The combination of powerfu software in the contro panes and an advanced range of oop powered devices deivers a fexibe, easy to use system for a buiding requirements and most appications. Beam Sensors The beam sensors are connected to the same oop wiring as a the other SenTRI devices, no additiona wiring is needed The beam sensors can be used on arge open areas such as atria and warehouses. The sensors aow for the effects of direct sunight through atria windows and aso short ived triggers of the beam path in warehouses, such as birds and forkifts The first fit ange bracket (suppied as an accessory) aows the beam unit to move, position and fix through a three axis as we as counter any movement of the buiding was Interfaces A fexibe range of housings and mounting options Interfaces with output channes don t need additiona reays the pane wi monitor for cabe fauts The range incudes ow votage and mains switching variants to meet a appication needs Our Mains Powered Interface (not pictured) has an integra EN54 Part 4 certified power suppy. Idea for door management and aspirating systems Manua Ca Points The manua ca point is avaiabe as a break gass variant or with resettabe eements As we as saving on the cost of repacement gasses, the resettabe eement is idea where gass coud prove to be a safety hazard Surface or fush mounted variants are avaiabe - the ca point fushes with a standard instaation back box

NOTES

NOTES

SMS is part of Honeywe Waterside Road Hamiton Industria Park Leicester LE5 1TN UK Te +44 (0)116 246 2042 Fax +44 (0)116 246 2016 Web www.smsfire.co.uk Literature ref: SMS18