DIRTT PRODUCT OVERVIEW WALL ACCESSORIES BREATHE LIVING WALL
1 Breathe Living Wall Assembly DIRTT brings its sustainable, modular, fl exible approach to the world of Living Walls with Breathe. This DIRTT system is a way for everyone to introduce living plants into their interiors to take advantage of the beauty, air cleaning attributes and kick of extra oxygen plants provide, all without using up precious real estate. Breathe is designed to allow plant pot modules to cantilever into the patented DIRTT support extrusions. Plants are easily added, moved and removed without disrupting adjacent plants. A straightforward plumbing system is also integrated with Breathe making watering simple. The self-contained pipes and troughs use gravity to send water through the system. Wicks in each pot allow all plant species to absorb what they need. After the last pot, any remaining water is captured standing water is not an issue for the plants or the occupants of the building. Each pot literally contains the plants to limit diseases and allow for easy removal, inspection or reconfi guration. Breathe Living Wall - Patent Pending ALLOW SPACE FROM EACH END of the DIRTT Wall Tile. Slat Wall may be fl ush with top of Tile or spaced as required. HOLES ARE PRE-DRILLED on Slat for fasteners. FASTEN SLAT WALL to DIRTT Wall Tile using Wood Screws as shown. CONFIRM that Wall Tile and Breathe Slat Assembly are level when assembled. DETAIL - BREATHE SLAT WALL ASSEMBLY attached to DIRTT Wall Tile. BASE BUILDING INSTALL: The Slats can also be attached to base building structures. BREATHE TROUGH ASSEMBLY showing 90 Elbow Connector feed with Inline Connectors joining 2 Troughs and a 90 Elbow Connector overfl ow. (Water Flow in Blue) II of VI
2 Plant Pot Assembly 1. INSERT 2 WICKS into bottom of Plant Pot. NOTE Two wicks per pot is recommended. This can vary dependent upon each plant s water requirements. 2. ADD GROWING MEDIUM AND PLANT (supplied by others) to Pot as shown. Place planting blocks under Pot to position Wicks in vertical position. Use registration lines on Pot to position plants toward front of Pot. * Breathe grows best with a professional, general purpose potting medium - not dirt. Use a soil-less horticultural growth medium (COM) designed for your specifi c plants, combined with a biofungicide to prevent root disease. 3. ROTATE POT AND INSERT WICKS into Trough. BEFORE ADDING WATER ensure that Water Troughs are level. III of VI
3 Manual Water Feed Assembled Breathe Living Wall - Watering THREE BREATHE TROUGHS and Breathe Slat Walls mounted to DIRTT Wall System. Detail shows a single Pot and Trough with Plug for Manual Water Feed (top left) and Overfl ow Container at Water Hose Overfl ow (bottom right). Water fl ow during fi lling indicated in blue. ALL BREATHE PLANT POTS can be repositioned horizontally to accommodate plant density. NOTE: Before adding water, ensure that troughs are level. Water Overfl ow Container IV of VI
DIRTT Product Guide 4 Assembled Breathe Living Wall - with Pressurized Watering System COMPLETE BREATHE WALL mounted to DIRTT Wall System set up for connection to a pressurized Watering System. Detail shows Pots, Quick Connector Regulator at Water Hose Feed (top left) and Overflow Container at Water Hose Overflow (bottom right). Water flow during filling indicated in blue. Water Overflow Container Pressurized Watering System Feed from bottom of Wall Optional Gable Ends V of VI
5 Assembled Breathe - Wall Dimensions CEILING WALL AREA MINIMUM DIMENSION EQUAL SPACE SLATS TROUGHS EQUAL SPACE EQUAL SPACE MINIMUM DIMENSION BREATHE TROUGHS AND SLATS mounted to base building wall. FLOOR GAP FROM EDGE OF TILE SLAT MODULE WIDTH GAP FROM EDGE OF TILE SLAT TROUGH SINGLE TROUGH MODULE WIDTH DIRTT WALL TILE TOTAL TILE HEIGHT TOTAL TILE WIDTH BREATHE TROUGHS AND SLATS mounted to Tile on DIRTT Wall System. VI of VI