Tabletop 2340 EA-D Class S Autoclave 19 Litres
Save time and improve efficiency in your clinic. Sterilisation in three simple steps: 1. Select the right program 2. Close the door 3. Press the Start Button Available Connections:
Sterilisation Programs 2340 EA-D is easy to operate and provides the user with four pre-defined cycles. Prg Sterilisation Program Description Temp Sterilisation Time (minutes) Drying Time (minutes) Total Time (minutes) 1 Unwrapped instruments 134⁰C 3 1 20 2 Wrapped instruments/ Pouches 134⁰C 7 20 45 3 Unwrapped delicate instruments 121⁰C 15 1 35 4 Wrapped delicate instruments 121⁰C 20 20 60 New door design New door design makes it very easy to open and close the door and to lock the door automatically when a cycle starts Cycle cannot be started if the door is not properly closed and locked A double safety device prevents the door from opening while the chamber is pressurised Steam production cannot start when the door is still open Door remains locked at the end of the cycle until atmospheric pressure will be reached
Active drying with closed door With its fast and efficient drying cycle, the 2340 EA-D is a must for your clinic. The 2340EA-D is equipped with a high efficiency air compressor, which allows active drying directly after the sterilisation phase has ended and with a closed door The 2340 EA-D is designed for the sterilisation of wrapped, solid instruments and assures you that the pouches are completely dry at the end of a cycle. The 2340 EA-D is equipped with a biological 0.2μm filter through which sterile air can enter the sterilisation chamber and in this way the machine assures dryness and sterility. Additional Safety Devices Two thermostats prevent overheating of the chamber A safety valve is mounted directly onto the chamber to prevent overpressure Directives and Norms Tuttnauer is constructing their sterilisers in compliance with international Directives and Norms. 97/23/EEC, Directive, concerning pressure equipment. ASME Code section I and section VIII. Div.I EN 61010-1: 2010 "Safety Requirements for measurement control and laboratory use". EN 61010-2-40: 2005 "Safety requirements for sterilizers and washer-disinfectors used to treat medical materials". ISO 9001: 2008 Quality Management System. ISO 13485: 2003 Quality Management System Medical devices. EN 14971: 2009 Medical devices Application of risk management. 93/42/EEC, Council Directive, concerning medical devices and as amended by Directive 2007/47/ EEC. Canadian MDR (CMDR) SOR/98-282 (2006), consolidated.
10 Reasons to choose for 2340 EA-D 1 Modern design A combination of simple lines, modern colors and 6 Built-In Ethernet Communication Port Optional software collects data and provides automatically state of the art technology. full cycle documentation. The connection is made through the standard available Ethernet connection. 2 Automatic door locking mechanism Opening and closing the door by one simple 7 Compact19 litre chamber 19 litre chamber volume, equipped with a holder for movement and with automatic locking mechanism. (maximum) 3 instrument trays. Standard the machine will be equipped with one instrument tray and one pouchrack. Extra trays are optionally available. 3 Display in different languages Many languages are directly available through the 8 One water reservoir only De presence of one water reservoir means you can start menu. using the machine by simply plugging it in and filling the tank. Since the water can be re-used, the water consumption for this machine is very low. All you have to do is draining the water tank after every 8-10 cycles or at least 4 5 User friendly operation by means of 3 buttons only A state of the art control system with microprocessor. The control system gives you high reliability, user safety, simplicity and fully automatic cycles. USB Connection The history of up to 200 cycles is stored in the 9 10 once a week and fill it again with fresh water. Complies to European Directives The 2340 EA-D complies fully with all Directives which are relevant for this type of product. The autoclave also complies with EN13060, which is the European Norm for small steam sterilizers.the steriliser chamber is made of 316 L Stainless Steel and Complies with the European PED (Pressure Equipment Directive) Preparation for Optional Printer If needed the autoclave can be equipped with a built-in autoclaves internal memory. thermal printer which prints the result of the cycle By connecting a USB memory you can easily copy immediately. all stored cycle date in text format. Now you can store the data on any computer system or print the data. The data obtained through the USB connection contains the following information: the selected cycle, cycle parameters, date, time, temperature, pressure, error messages, etc.
Technical Specifications Specifications 2340 EA-D Chamber Dimensions, Diameter x Depth, mm (inch) 230 (9) x 440 (15,6) Chamber volume, Litre (gal) 19 L. (5 gal) External Dimensions W x H x D, mm (inch) 480 (18,9) x 385 (15,1) x 630 (24,8) Weight kg (lb) Shipping Weight, kg (lb) 32 kg (70,4 lb) 42 kg (92,4 lb) Shipping Dimensions W x H x D, mm (inch 640 (25,2) x 470 (18,5) x 750 (29,5) Tray Dimensions W x H x D, mm (inch) 170 (6,7) x 20 (0. 8) x 415 (16,3) Maximum number of trays 3 Standaard configuration Heating Capacity, Power Supply 1 instrument tray plus 1 pouch rack 1400W, 1 fase, 230V 7A, 50/60 Hz Available Cycles 4 Water Reservoir 1 (Demiwater) Safety is our highest priority Tuttnauer has over 85 years of experience in sterilisation technology and has always developed autoclaves based on cutting-edge technology and reliable processes. With our most recent model, the 2340 EA-D Class S Autoclave, we continue this tradition. EA-D is the ideal solution for general practitioners, gynecology en podology, etc. Tuttnauer Europe B.V. Distributor: Hoeksteen 11 4815 PR Breda, The Netherlands Tel: +31 (0)76 542 35 10 Fax: +31 (0)76 542 35 40 Email: info@tuttnauer.nl V:1.4